This commit upgrades github.com/containerd/typeurl to use typeurl.Any.
The interface hides gogo/protobuf/types.Any from containerd's Go client.
Signed-off-by: Kazuyoshi Kato <katokazu@amazon.com>
runc option --criu is now ignored (with a warning), and the option will be
removed entirely in a future release. Users who need a non- standard criu
binary should rely on the standard way of looking up binaries in $PATH.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Currently when handling 'container_path' elements in container mounts we simply call
filepath.Clean on those paths. However, filepath.Clean adds an extra '.' if the path is a
simple drive letter ('E:' or 'Z:' etc.). These type of paths cause failures (with incorrect
parameter error) when creating containers via hcsshim. This commit checks for such paths
and doesn't call filepath.Clean on them.
It also adds a new check to error out if the destination path is a C drive and moves the
dst path checks out of the named pipe condition.
Signed-off-by: Amit Barve <ambarve@microsoft.com>
The linter on platforms that have a hardcoded response complains about
"if xyz == nil" checks; ignore those.
Signed-off-by: Phil Estes <estesp@amazon.com>
There's two mappings of hostpath to IDType and ID in the wild:
- dockershim and dockerd-cri (implicitly via docker) use class/ID
-- The only supported IDType in Docker is 'class'.
-- https://github.com/aarnaud/k8s-directx-device-plugin generates this form
- https://github.com/jterry75/cri (windows_port branch) uses IDType://ID
-- hcsshim's CRI test suite generates this form
`://` is much more easily distinguishable, so I've gone with that one as
the generic separator, with `class/` as a special-case.
Signed-off-by: Paul "TBBle" Hampson <Paul.Hampson@Pobox.com>
These unit tests don't check hugetlb. However by setting
TolerateMissingHugetlbController to false, these tests can't
be run on system without hugetlb (e.g. Debian buildd).
Signed-off-by: Shengjing Zhu <zhsj@debian.org>
full diff: https://github.com/emicklei/go-restful/compare/v2.9.5...v3.7.3
- Switch to using go modules
- Add check for wildcard to fix CORS filter
- Add check on writer to prevent compression of response twice
- Add OPTIONS shortcut WebService receiver
- Add Route metadata to request attributes or allow adding attributes to routes
- Add wroteHeader set
- Enable content encoding on Handle and ServeHTTP
- Feat: support google custom verb
- Feature: override list of method allowed without content-type
- Fix Allow header not set on '405: Method Not Allowed' responses
- Fix Go 1.15: conversion from int to string yields a string of one rune
- Fix WriteError return value
- Fix: use request/response resulting from filter chain
- handle path params with prefixes and suffixes
- HTTP response body was broken, if struct to be converted to JSON has boolean value
- List available representations in 406 body
- Support describing response headers
- Unwrap function in filter chain + remove unused dispatchWithFilters
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
We were not properly ignoring errors from
gorestrl.rdt.ContainerClassFromAnnotations() causing the config option
to be ineffective, in practice.
Signed-off-by: Markus Lehtonen <markus.lehtonen@intel.com>
With the cgroupv2 configuration employed by Kubernetes, the pod cgroup (slice)
and container cgroup (scope) will both have the same memory limit applied. In
that situation, the kernel will consider an OOM event to be triggered by the
parent cgroup (slice), and increment 'oom' there. The child cgroup (scope) only
sees an oom_kill increment. Since we monitor child cgroups for oom events,
check the OOMKill field so that we don't miss events.
This is not visible when running containers through docker or ctr, because they
set the limits differently (only container level). An alternative would be to
not configure limits at the pod level - that way the container limit will be
hit and the OOM will be correctly generated. An interesting consequence is that
when spawning a pod with multiple containers, the oom events also work
correctly, because:
a) if one of the containers has no limit, the pod has no limit so OOM events in
another container report correctly.
b) if all of the containers have limits then the pod limit will be a sum of
container events, so a container will be able to hit its limit first.
Signed-off-by: Jeremi Piotrowski <jpiotrowski@microsoft.com>
When the cgroup is removed, EventChan is closed (this was pulled in by
8d69c041c5). This results in a nil error
being received. Don't log an error in that case but instead return.
Signed-off-by: Jeremi Piotrowski <jpiotrowski@microsoft.com>
The Linux kernel never sets the Inheritable capability flag to
anything other than empty. Non-empty values are always exclusively
set by userspace code.
[The kernel stopped defaulting this set of capability values to the
full set in 2000 after a privilege escalation with Capabilities
affecting Sendmail and others.]
Signed-off-by: Andrew G. Morgan <morgan@kernel.org>
Enabling this option effectively causes RDT class of a container to be a
soft requirement. If RDT support has not been enabled the RDT class
setting will not have any effect.
Signed-off-by: Markus Lehtonen <markus.lehtonen@intel.com>
Use goresctrl for parsing container and pod annotations related to RDT.
In practice, from the users' point of view, this patchs adds support for
a container annotation and two separate pod annotations for controlling
the RDT class of containers.
Container annotation can be used by a CRI client:
"io.kubernetes.cri.rdt-class"
Pod annotations for specifying the RDT class in the K8s pod spec level:
"rdt.resources.beta.kubernetes.io/pod"
(pod-wide default for all containers within)
"rdt.resources.beta.kubernetes.io/container.<container_name>"
(container-specific overrides)
Annotations are intended as an intermediate step before the CRI API
supports RDT.
Signed-off-by: Markus Lehtonen <markus.lehtonen@intel.com>
The ability to handle KVM based runtimes with SELinux has been added as
part of d715d00906.
However, that commit introduced some logic to check whether the
"container_kvm_t" label would or not be present in the system, and while
the intentions were good, there's two major issues with the approach:
1. Inspecting "/etc/selinux/targeted/contexts/customizable_types" is not
the way to go, as it doesn't list the "container_kvm_t" at all.
2. There's no need to check for the label, as if the label is invalid an
"Invalid Label" error will be returned and that's it.
With those two in mind, let's simplify the logic behind setting the
"container_kvm_t" label, removing all the unnecessary code.
Here's an output of VMM process running, considering:
* The state before this patch:
```
$ containerd --version
containerd github.com/containerd/containerd v1.6.0-beta.3-88-g7fa44fc98 7fa44fc98f
$ kubectl apply -f ~/simple-pod.yaml
pod/nginx created
$ ps -auxZ | grep cloud-hypervisor
system_u:system_r:container_runtime_t:s0 root 609717 4.0 0.5 2987512 83588 ? Sl 08:32 0:00 /usr/bin/cloud-hypervisor --api-socket /run/vc/vm/be9d5cbabf440510d58d89fc8a8e77c27e96ddc99709ecaf5ab94c6b6b0d4c89/clh-api.sock
```
* The state after this patch:
```
$ containerd --version
containerd github.com/containerd/containerd v1.6.0-beta.3-89-ga5f2113c9 a5f2113c9fc15b19b2c364caaedb99c22de4eb32
$ kubectl apply -f ~/simple-pod.yaml
pod/nginx created
$ ps -auxZ | grep cloud-hypervisor
system_u:system_r:container_kvm_t:s0:c638,c999 root 614842 14.0 0.5 2987512 83228 ? Sl 08:40 0:00 /usr/bin/cloud-hypervisor --api-socket /run/vc/vm/f8ff838afdbe0a546f6995fe9b08e0956d0d0cdfe749705d7ce4618695baa68c/clh-api.sock
```
Note, the tests were performed using the following configuration snippet:
```
[plugins]
[plugins.cri]
enable_selinux = true
[plugins.cri.containerd]
[plugins.cri.containerd.runtimes]
[plugins.cri.containerd.runtimes.kata]
runtime_type = "io.containerd.kata.v2"
privileged_without_host_devices = true
```
And using the following pod yaml:
```
apiVersion: v1
kind: Pod
metadata:
name: nginx
spec:
runtimeClassName: kata
containers:
- name: nginx
image: nginx:1.14.2
ports:
- containerPort: 80
```
Fixes: #6371
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
CRI API has been updated to include a an optional `resources` field in the
LinuxPodSandboxConfig field, as part of the RunPodSandbox request.
Having sandbox level resource details at sandbox creation time will have
large benefits for sandboxed runtimes. In the case of Kata Containers,
for example, this'll allow for better support of SW/HW architectures
which don't allow for CPU/memory hotplug, and it'll allow for better
queue sizing for virtio devices associated with the sandbox (in the VM
case).
If this sandbox resource information is provided as part of the run
sandbox request, let's introduce a pattern where we will update the
pause container's runtiem spec to include this information in the
annotations field.
Signed-off-by: Eric Ernst <eric_ernst@apple.com>
When containerd use this config:
```
[plugins."io.containerd.grpc.v1.cri".registry.mirrors]
[plugins."io.containerd.grpc.v1.cri".registry.mirrors."localhost:5000"]
endpoint = ["http://localhost:5000"]
```
Due to the `newTransport` function does not initialize the `TLSClientConfig` field.
Then use `TLSClientConfig` to cause nil pointer dereference
Signed-off-by: wanglei <wllenyj@linux.alibaba.com>
