This adds context to all the relevant cloud provider interface signatures.
Callers of those APIs are currently satisfied using context.TODO().
There will be follow on PRs to push the context through the stack.
For an idea of the full scope of this change please look at PR #58532.
With IPv4, the node CIDR prefix is set to /24, which gives 256 pods per node
and 256 nodes, when assuming a /16 is used for the pod subnet.
For IPv6, the node CIDR prefix, is hard coded to /64. This does not work,
because currently the pod subnet prefix must be /66 or higher and must be a
larger subnet (lower value) than the node CIDR prefix.
In addition, the bit mask used to track the subnets (implying the number of
nodes), can only handle 64K entries, so the difference between pod subnet
prefix and node CIDR prefix cannot be more than 16 (bits). The node CIDR
value needs to support this restriction.
To address this, the following algorithm is proposed...
For pod subnet prefixes of /113 or smaller, the remaining bits will be used
for the node CIDR, in multiples of 8, and 9-16 bits will be reserved for the
nodes, so that there are 512-64K nodes and 256, 512, 768, ... pods/node.
For example, with a pod network of /111, there will be 17 bits available. This
would give 8 bits for pods per node and 9 bits for nodes. The node CIDR would
be /120. For a pod network of /104, there will be 24 bits available. There will
be 8 bits for nodes, and 16 bits for pods/node, using a /112 node CIDR.
If the pod subnet prefix is /112, then the node CIDR will be set to /120, and
256 nodes and 256 pods/node will be available.
If the subnet prefix is /113 to /128, we don't have enough bits and will set
the node CIDR prefix to be the same as the pod subnet prefix. This will cause
a falure later, when it tests that the pod subnet prefix is larger than the
node CIDR prefix.
Automatic merge from submit-queue (batch tested with PRs 51323, 59306, 58991, 59050). If you want to cherry-pick this change to another branch, please follow the instructions <a href="https://github.com/kubernetes/community/blob/master/contributors/devel/cherry-picks.md">here</a>.
clean temporary para for require-kubeconfig
**What this PR does / why we need it**:
delete temporary require-kubeconfig
**Which issue(s) this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close the issue(s) when PR gets merged)*:
Fixes #
**Special notes for your reviewer**:
**Release note**:
```release-note
NONE
```
Automatic merge from submit-queue (batch tested with PRs 59165, 59386). If you want to cherry-pick this change to another branch, please follow the instructions <a href="https://github.com/kubernetes/community/blob/master/contributors/devel/cherry-picks.md">here</a>.
Scheduler - not able to read from config file if configmap is not found
**What this PR does / why we need it**:
As of now, we are not able to read config file if configmap is not present. As of now, the only way to make it work is to enable legacy mode which should not be the case.
xref: https://bugzilla.redhat.com/show_bug.cgi?id=1540785
**Release note**:
```release-note
Scheduler should be able to read from config file if configmap is not present.
```
/cc @bsalamat @ironcladlou
Automatic merge from submit-queue. If you want to cherry-pick this change to another branch, please follow the instructions <a href="https://github.com/kubernetes/community/blob/master/contributors/devel/cherry-picks.md">here</a>.
kube-proxy: fix field name comments & json tags
**What this PR does / why we need it**: correct some minor issues in the comments and json tags for some of the fields in the kube-proxy config structs.
**Which issue(s) this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close the issue(s) when PR gets merged)*:
Fixes #
**Special notes for your reviewer**:
**Release note**:
```release-note
The udpTimeoutMilliseconds field in the kube-proxy configuration file has been renamed to udpIdleTimeout. Action required: administrators need to update their files accordingly.
```
This was extracted from my currently unmerged f074b28fe9, as requested [here](https://github.com/kubernetes/kubernetes/pull/52198#pullrequestreview-85538637).
@kubernetes/sig-network-pr-reviews @luxas
Automatic merge from submit-queue (batch tested with PRs 59158, 38320, 59059, 55516, 59357). If you want to cherry-pick this change to another branch, please follow the instructions <a href="https://github.com/kubernetes/community/blob/master/contributors/devel/cherry-picks.md">here</a>.
Promote v1alpha1 meta to v1beta1
No code changes, just renames. We can discuss if there are any field / naming changes here or in a follow-up
Parent #58536Fixes#53224
Prereq to #55637
@kubernetes/sig-api-machinery-pr-reviews @deads2k
```release-note
The `meta.k8s.io/v1alpha1` objects for retrieving tabular responses from the server (`Table`) or fetching just the `ObjectMeta` for an object (as `PartialObjectMetadata`) are now beta as part of `meta.k8s.io/v1beta1`. Clients may request alternate representations of normal Kubernetes objects by passing an `Accept` header like `application/json;as=Table;g=meta.k8s.io;v=v1beta1` or `application/json;as=PartialObjectMetadata;g=meta.k8s.io;v1=v1beta1`. Older servers will ignore this representation or return an error if it is not available. Clients may request fallback to the normal object by adding a non-qualified mime-type to their `Accept` header like `application/json` - the server will then respond with either the alternate representation if it is supported or the fallback mime-type which is the normal object response.
```
Automatic merge from submit-queue. If you want to cherry-pick this change to another branch, please follow the instructions <a href="https://github.com/kubernetes/community/blob/master/contributors/devel/cherry-picks.md">here</a>.
add PV size grow feature for azure file
**What this PR does / why we need it**:
According to kubernetes/features#284, add size grow feature for azure file
**Which issue(s) this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close the issue(s) when PR gets merged)*:
Fixes#56462
**Special notes for your reviewer**:
Since azure file is using SMB 3.0 protocal, there is no necessary to resize filesystem on agent side, the agent node will detect the changed size automatically.
**Release note**:
```
add size grow feature for azure file
```
/sig azure
@gnufied @rootfs @brendandburns
If we go a certain amount of time without being able to create a client
cert and we have no current client cert from the store, exit. This
prevents a corrupted local copy of the cert from leaving the Kubelet in a
zombie state forever. Exiting allows a config loop outside the Kubelet
to clean up the file or the bootstrap client cert to get another client
cert.
Automatic merge from submit-queue. If you want to cherry-pick this change to another branch, please follow the instructions <a href="https://github.com/kubernetes/community/blob/master/contributors/devel/cherry-picks.md">here</a>.
kubeadm init: skip checking cri socket in preflight checks
**What this PR does / why we need it**:
`kubeadm init` does not need to require `dockershim.sock` to be present.
Remove the check for `dockershim.sock`.
xref #55055
**Which issue(s) this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close the issue(s) when PR gets merged)*:
Fixeskubernetes/kubeadm#657
**Special notes for your reviewer**:
/area kubeadm
/kind bug
/assign @luxas
/cc @kubernetes/sig-cluster-lifecycle-pr-reviews
**Release note**:
```release-note
kubeadm init: skip checking cri socket in preflight checks
```
Automatic merge from submit-queue. If you want to cherry-pick this change to another branch, please follow the instructions <a href="https://github.com/kubernetes/community/blob/master/contributors/devel/cherry-picks.md">here</a>.
Postpone PV deletion with finalizer when it is being used
Postpone PV deletion if it is bound to a PVC
xref: https://github.com/kubernetes/community/pull/1608
**Which issue(s) this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close the issue(s) when PR gets merged)*:
Fixes#33355
**Special notes for your reviewer**:
**Release note**:
```release-note
Postpone PV deletion when it is being bound to a PVC
```
WIP, assign to myself first
/assign @NickrenREN
Automatic merge from submit-queue. If you want to cherry-pick this change to another branch, please follow the instructions <a href="https://github.com/kubernetes/community/blob/master/contributors/devel/cherry-picks.md">here</a>.
Add V1beta1 VolumeAttachment API
**What this PR does / why we need it**:
Add V1beta1 VolumeAttachment API, co-existing with Alpha API object
**Which issue(s) this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close the issue(s) when PR gets merged)*:
Fixes#58461
**Special notes for your reviewer**:
**Release note**:
```release-note
Add V1beta1 VolumeAttachment API, co-existing with Alpha API object
```
Automatic merge from submit-queue. If you want to cherry-pick this change to another branch, please follow the instructions <a href="https://github.com/kubernetes/community/blob/master/contributors/devel/cherry-picks.md">here</a>.
Add call to addCredentialProviderFlags
**What this PR does / why we need it**:
Credential flags such as 'azure-container-registry-config' are still in use, call addCredentialProviderFlags to hook it up.
See:
https://github.com/kubernetes/kubernetes/pull/56995#issuecomment-361483382
**Which issue(s) this PR fixes**
Follow up of #56995
**Special notes for your reviewer**:
/assign @mtaufen @liggitt
**Release note**:
```release-note
NONE
```
Automatic merge from submit-queue. If you want to cherry-pick this change to another branch, please follow the instructions <a href="https://github.com/kubernetes/community/blob/master/contributors/devel/cherry-picks.md">here</a>.
refactor aggregator api group install
**What this PR does / why we need it**:
refactor aggregator apigroup install. move NewRESTStorage to
`staging/src/k8s.io/kube-aggregator/pkg/registry/apiservice/rest/storage_apiservice.go`
**Special notes for your reviewer**:
**Release note**:
```release-note
NONE
```
Automatic merge from submit-queue. If you want to cherry-pick this change to another branch, please follow the instructions <a href="https://github.com/kubernetes/community/blob/master/contributors/devel/cherry-picks.md">here</a>.
Fix PodPidsLimit and ConfigTrialDuration on internal KubeletConfig type
They should both follow the convention of not being a pointer on the internal type.
This required adding a conversion function between `int64` and `*int64`. A side effect is this removes a warning in the generated code for the apps API group.
@dims
```release-note
NONE
```
Automatic merge from submit-queue. If you want to cherry-pick this change to another branch, please follow the instructions <a href="https://github.com/kubernetes/community/blob/master/contributors/devel/cherry-picks.md">here</a>.
Include `upstream` option in CoreDNS
**What this PR does / why we need it**:
Including `upstream` as a default in the manifest and keep in sync with the default CoreDNS manifest.
**Which issue(s) this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close the issue(s) when PR gets merged)*:
Fixes#57785
**Special notes for your reviewer**:
**Release note**:
```release-note
NONE
```
Automatic merge from submit-queue. If you want to cherry-pick this change to another branch, please follow the instructions <a href="https://github.com/kubernetes/community/blob/master/contributors/devel/cherry-picks.md">here</a>.
Fix adding FileContentCheck
**What this PR does / why we need it**:
Current code adds FileContentCheck only for the first API
Server mentioned in the command line. The test is never added
as net.ParseIP always fails because address:port is passed
to it instead of just an address.
Fixed both issues by introducing a loop over all API Servers
and splitting address:port before passing address to the
net.ParseIP API.
**Release note**:
```release-note
NONE
```
They should both follow the convention of not being a pointer on the
internal type. This required adding a conversion function between
`int64` and `*int64`.
A side effect is this removes a warning in the generated code for the
apps API group.
Automatic merge from submit-queue. If you want to cherry-pick this change to another branch, please follow the instructions <a href="https://github.com/kubernetes/community/blob/master/contributors/devel/cherry-picks.md">here</a>.
kube-apiserver flag --admision-control is deprecated, use the new --e…
…nable-admission-plugins
**What this PR does / why we need it**:
1. As #58123 mark kube-apiserver flag `admission-control` deprecated, replace it in some places.
**Which issue(s) this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close the issue(s) when PR gets merged)*:
Fixes #
**Special notes for your reviewer**:
**Release note**:
```release-note
NONE
```
/assign @liggitt @deads2k @sttts
This check doesn't use port. It uses proxy related variables
(HTTP_PROXY, NO_PROXY, etc) that only operate with protocol
and host.
Removing port from the check should make it more clear for
user that port is not used as it will not be present in
the check output.
This changes the Kubelet configuration flag precedence order so that
flags take precedence over config from files/ConfigMaps.
See #56171 for rationale.
Note: Feature gates accumulate with the following
precedence (greater number overrides lesser number):
1. file-based config
2. dynamic cofig
3. flag-based config
Automatic merge from submit-queue. If you want to cherry-pick this change to another branch, please follow the instructions <a href="https://github.com/kubernetes/community/blob/master/contributors/devel/cherry-picks.md">here</a>.
Remove deprecated --require-kubeconfig flag, remove default --kubeconfig value
**What this PR does / why we need it**:
**Which issue(s) this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close the issue(s) when PR gets merged)*:
Fixes#41161
**Special notes for your reviewer**:
**Release note**:
```release-note
Remove deprecated --require-kubeconfig flag, remove default --kubeconfig value
```
Automatic merge from submit-queue. If you want to cherry-pick this change to another branch, please follow the instructions <a href="https://github.com/kubernetes/community/blob/master/contributors/devel/cherry-picks.md">here</a>.
Use SSH tunnel for webhook communication iff the webhook is deployed as a service
**What this PR does / why we need it**:
We are getting the following error when the apiserver connects the webhook on localhost (configured via URL). We should only use the SSL tunnel for the connections to nodes when the webhooks are running as services.
```
I0119 17:41:18.678436 1 ssh.go:400] [4cdf44753cc3705d: localhost:10258] Dialing...
W0119 17:41:18.678483 1 ssh.go:424] SSH tunnel not found for address "localhost", picking random node
I0119 17:41:18.679810 1 ssh.go:402] [4cdf44753cc3705d: localhost:10258] Dialed in 1.398691ms.
W0119 17:41:18.679928 1 admission.go:256] Failed calling webhook, failing closed xxx: failed calling admission webhook "xxx": Post xxx: ssh: rejected: connect failed (Connection refused)
I0119 17:41:18.680346 1 wrap.go:42] POST /api/v1/namespaces/kube-system/pods: (5.725588ms) 500
```
**Which issue(s) this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close the issue(s) when PR gets merged)*:
Fixes # https://github.com/kubernetes/kubernetes/issues/58779
**Special notes for your reviewer**:
**Release note**:
```release-note
kube-apiserver is changed to use SSH tunnels for webhook iff the webhook is not directly routable from apiserver's network environment.
```
/assign @lavalamp @caesarxuchao @cheftako
Automatic merge from submit-queue. If you want to cherry-pick this change to another branch, please follow the instructions <a href="https://github.com/kubernetes/community/blob/master/contributors/devel/cherry-picks.md">here</a>.
Removal of KubeletConfigFile feature gate: Step 1
This feature gate was redundant with the `--config` flag, which already
enables/disables loading Kubelet config from a file.
Since the gate guarded an alpha feature, removing it is not a violation
of our API guidelines.
Some stuff in `kubernetes/test-infra` currently sets the gate,
so removing will be a 3 step process:
1. This PR, which makes the gate a no-op.
2. Stop setting the gate in `kubernetes/test-infra`.
3. Completely remove the gate (this PR will get the release note).
```release-note
NONE
```
Automatic merge from submit-queue (batch tested with PRs 55792, 58342). If you want to cherry-pick this change to another branch, please follow the instructions <a href="https://github.com/kubernetes/community/blob/master/contributors/devel/cherry-picks.md">here</a>.
Promote Statefulset controller and its e2e tests to use apps/v1
**What this PR does / why we need it**:
Promotes the statefulset controller to use to use the latest apps group [apps/v1](https://github.com/kubernetes/kubernetes/pull/53679)
**Which issue(s) this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close the issue(s) when PR gets merged)*:
Fixes # https://github.com/kubernetes/kubernetes/issues/55714
**Special notes for your reviewer**:
* Listerexpansion for v1 `k8s.io/client-go/listers/apps/v1` (was recently done for v1beta2)
* `v1beta2` && `v1` had `ObservedGeneration` as `int64` where as `v1beta1` and rest of the code (including conversion) is expecting `ObservedGeneration` to be `*int64`
```
type StatefulSetStatus struct {
// observedGeneration is the most recent generation observed for this StatefulSet. It corresponds to the
// StatefulSet's generation, which is updated on mutation by the API Server.
// +optional
ObservedGeneration int64 `json:"observedGeneration,omitempty" protobuf:"varint,1,opt,name=observedGeneration"`
```
* for kubectl's `rollback` and `history` commands a couple functions have been duplicated to allow us to use `v1` version instead of `v1beta1` for statefulsets, while the older functions are still used by other controllers.
We should be able to remove these duplicates once all the controllers are moved.
If this aligns with the plan then i could move other controllers too.
cc: @kow3ns
**Release note**:
```release-note
NONE
```
Automatic merge from submit-queue (batch tested with PRs 58518, 58771, 58101, 56829). If you want to cherry-pick this change to another branch, please follow the instructions <a href="https://github.com/kubernetes/community/blob/master/contributors/devel/cherry-picks.md">here</a>.
Fix typo
**What this PR does / why we need it**:
Fix a typo (evalutated -> evaluated).
**Which issue(s) this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close the issue(s) when PR gets merged)*:
Fixes #
**Special notes for your reviewer**:
I didn't touch pkg/generated/bindata.go and k8s.mo. Should I regenerate them in this PR?
**Release note**:
```release-note
NONE
```
Automatic merge from submit-queue (batch tested with PRs 57973, 57990). If you want to cherry-pick this change to another branch, please follow the instructions <a href="https://github.com/kubernetes/community/blob/master/contributors/devel/cherry-picks.md">here</a>.
Set pids limit at pod level
**What this PR does / why we need it**:
Add a new Alpha Feature to set a maximum number of pids per Pod.
This is to allow the use case where cluster administrators wish
to limit the pids consumed per pod (example when running a CI system).
By default, we do not set any maximum limit, If an administrator wants
to enable this, they should enable `SupportPodPidsLimit=true` in the
`--feature-gates=` parameter to kubelet and specify the limit using the
`--pod-max-pids` parameter.
The limit set is the total count of all processes running in all
containers in the pod.
**Which issue(s) this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close the issue(s) when PR gets merged)*:
Fixes#43783
**Special notes for your reviewer**:
**Release note**:
```release-note
New alpha feature to limit the number of processes running in a pod. Cluster administrators will be able to place limits by using the new kubelet command line parameter --pod-max-pids. Note that since this is a alpha feature they will need to enable the "SupportPodPidsLimit" feature.
```
Automatic merge from submit-queue (batch tested with PRs 58626, 58791). If you want to cherry-pick this change to another branch, please follow the instructions <a href="https://github.com/kubernetes/community/blob/master/contributors/devel/cherry-picks.md">here</a>.
serviceaccount: check token is issued by correct iss before verifying
Right now if a JWT for an unknown issuer, for any subject hits the
serviceaccount token authenticator, we return a errors as if the token
was meant for us but we couldn't find a key to verify it. We should
instead return nil, false, nil.
This change helps us support multiple service account token
authenticators with different issuers.
https://github.com/kubernetes/kubernetes/issues/58790
```release-note
NONE
```
Automatic merge from submit-queue. If you want to cherry-pick this change to another branch, please follow the instructions <a href="https://github.com/kubernetes/community/blob/master/contributors/devel/cherry-picks.md">here</a>.
uniquify resource lock identities
Resource lock identities on the same host were not unique. This keeps the hostname (that's valuable), but also adds a UUID so that you can start a process twice on the same host and not end up with two processes trying to lead.
@kubernetes/sig-api-machinery-bugs @liggitt @smarterclayton
Current code adds FileContentCheck only for the first API
Server mentioned in the command line. The test is never added
as net.ParseIP always fails because <address>:<port> is passed
to it instead of <address>.
Fixed both issues by introducing a loop over all API Servers
and splitting <address>:<port> before passing <address> to the
net.ParseIP API.
Right now if a JWT for an unknown issuer, for any subject hits the
serviceaccount token authenticator, we return a errors as if the token
was meant for us but we couldn't find a key to verify it. We should
instead return nil, false, nil.
This change helps us support multiple service account token
authenticators with different issuers.
Automatic merge from submit-queue (batch tested with PRs 58259, 58664). If you want to cherry-pick this change to another branch, please follow the instructions <a href="https://github.com/kubernetes/community/blob/master/contributors/devel/cherry-picks.md">here</a>.
Support out-of-tree / external cloud providers
**What this PR does / why we need it**:
Currently kubeadm fails in preflight check. We should allow external cloud providers
```
[preflight] Starting the kubelet service
cloudprovider: Invalid value: "external": cloudprovider not supported
```
**Which issue(s) this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close the issue(s) when PR gets merged)*:
Fixes #
**Special notes for your reviewer**:
**Release note**:
```release-note
Added support for external cloud providers in kubeadm
```
This feature gate was redundant with the `--config` flag, which already
enables/disables loading Kubelet config from a file.
Since the gate guarded an alpha feature, removing it is not a violation
of our API guidelines.
Some stuff in `kubernetes/test-infra` currently sets the gate,
so removing will be a 3 step process:
1. This PR, which makes the gate a no-op.
2. Stop setting the gate in `kubernetes/test-infra`.
3. Completely remove the gate.
Automatic merge from submit-queue (batch tested with PRs 58547, 57228, 58528, 58499, 58618). If you want to cherry-pick this change to another branch, please follow the instructions <a href="https://github.com/kubernetes/community/blob/master/contributors/devel/cherry-picks.md">here</a>.
Add TLS min version flag
Adds a flag for controlling the minimum TLS level allowed.
/assign liggitt
@kubernetes/sig-node-pr-reviews @k8s-mirror-api-machinery-pr-reviews
```release-note
--tls-min-version on kubelet and kube-apiserver allow for configuring minimum TLS versions
```
Automatic merge from submit-queue. If you want to cherry-pick this change to another branch, please follow the instructions <a href="https://github.com/kubernetes/community/blob/master/contributors/devel/cherry-picks.md">here</a>.
dockershim: remove the use of kubelet's internal API
We let dockershim implement the kubelet's internal (CRI) API as an
intermediary step before transitioning fully to communicate using gRPC.
Now that kubelet has been communicating to the runtime over gRPC for
multiple releases, we can safely retire the extra interface in
dockershim.
This PR also moves the legacy functions to a separate file and clean up
the interfaces.
Automatic merge from submit-queue (batch tested with PRs 53895, 58013, 58466, 58531, 58535). If you want to cherry-pick this change to another branch, please follow the instructions <a href="https://github.com/kubernetes/community/blob/master/contributors/devel/cherry-picks.md">here</a>.
[kubeadm] Bump kube-dns to 1.14.8
**What this PR does / why we need it**:
Bump kube-dns to 1.14.8 for kubeadm. Ref https://github.com/kubernetes/kubernetes/pull/57918.
cc @rramkumar1
**Which issue(s) this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close the issue(s) when PR gets merged)*:
Fixes #NONE
**Special notes for your reviewer**:
**Release note**:
```release-note
NONE
```
Automatic merge from submit-queue. If you want to cherry-pick this change to another branch, please follow the instructions <a href="https://github.com/kubernetes/community/blob/master/contributors/devel/cherry-picks.md">here</a>.
kubeadm: Utilize transport defaults from API machinery for http calls inside kubeadm
**What this PR does / why we need it**:
Default Go HTTP transport does not allow to use CIDR notations in
NO_PROXY variables, thus for certain HTTP calls that is done inside
kubeadm user needs to put explicitly multiple IP addresses. For most of
calls done via API machinery it is get solved by setting different Proxy
resolver. This patch allows to use CIDR notations in NO_PROXY variables
for currently all other HTTP calls that is made inside kubeadm.
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes kubernetes/kubeadm#324
**Special notes for your reviewer**:
Based on discussion in #52788, replacing this patch replacing all calls inside kubeadm that are done via DefaultTransport to explicitly defined and initialized with API machinery defaults Transport and http client.
**Release note**:
```release-note
- kubeadm now supports CIDR notations in NO_PROXY environment variable
```
Automatic merge from submit-queue. If you want to cherry-pick this change to another branch, please follow the instructions <a href="https://github.com/kubernetes/community/blob/master/contributors/devel/cherry-picks.md">here</a>.
kubeadm: Allows to specify custom flag values for control plane components
This makes it possible to override / add flag values to the k8s api server, controller manager and scheduler components on `kubeadm init` and `kubeadm alpha controlplane <component>`
**What this PR does / why we need it**:
This PR makes kubeadm a little more flexible by allowing to specify flag values (or override kubeadm defaults) for the control plane components.
One good example is to deploy Kubernetes with a different admission-control flag on API server
**Which issue(s) this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close the issue(s) when PR gets merged)*:
Fixes#58072
**Special notes for your reviewer**:
Not sure about what should be fixed. The PR merely adds flags to the CLI exposing existing functionality (which I suppose is already tested)
**Release note**:
```release-note
kubeadm now accept `--apiserver-extra-args`, `--controller-manager-extra-args` and `--scheduler-extra-args` to override / specify additional flags for control plane components
```
Automatic merge from submit-queue. If you want to cherry-pick this change to another branch, please follow the instructions <a href="https://github.com/kubernetes/community/blob/master/contributors/devel/cherry-picks.md">here</a>.
improve error message for expired tokens
**What this PR does / why we need it**:
When you join a node with a expired tokens, you can get fuzz error messages: `[discovery] Failed to connect to API Server "<cluster-ip>:6443": there is no JWS signed token in the cluster-info ConfigMap. This token id "c33826" is invalid for this cluster, can't connect`, we should improve it.
**Which issue(s) this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close the issue(s) when PR gets merged)*:
Fixes [https://github.com/kubernetes/kubeadm/issues/630](https://github.com/kubernetes/kubeadm/issues/630)
**Special notes for your reviewer**:
**Release note**:
```release-note
NONE
```
Automatic merge from submit-queue (batch tested with PRs 58446, 58459, 58340). If you want to cherry-pick this change to another branch, please follow the instructions <a href="https://github.com/kubernetes/community/blob/master/contributors/devel/cherry-picks.md">here</a>.
handle scheduler without exposed ports
Plumbs the scheduler port opt out more completely. When the metrics server was added, the deprecated paths forgot about it.
Automatic merge from submit-queue (batch tested with PRs 58496, 58078, 58123). If you want to cherry-pick this change to another branch, please follow the instructions <a href="https://github.com/kubernetes/community/blob/master/contributors/devel/cherry-picks.md">here</a>.
refactor admission flag
**What this PR does / why we need it**:
Refactor admission control flag, finally make cluster admins not care about orders in this flag.
**Which issue(s) this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close the issue(s) when PR gets merged)*:
Fixes #
**Special notes for your reviewer**:
**Release note**:
```release-note
Add `--enable-admission-plugin` `--disable-admission-plugin` flags and deprecate `--admission-control`.
Afterwards, don't care about the orders specified in the flags.
```
This makes it possible to override / add flag values to the k8s api server, controller manager and scheduler components on `kubeadm init` and `kubeadm alpha controlplane <component>`
Signed-off-by: Simon Ferquel <simon.ferquel@docker.com>
Automatic merge from submit-queue. If you want to cherry-pick this change to another branch, please follow the instructions <a href="https://github.com/kubernetes/community/blob/master/contributors/devel/cherry-picks.md">here</a>.
Kubeadm: clean up MarshalToYamlForCodecs
Proxy will use PrintBytesWithLinePrefix to indent.
**What this PR does / why we need it**:
This removed the function MarshalToYamlForCodecsWithShift() and the proxy
code will use PrintBytesWithLinePrefix() to shift over the yaml lines.
**Which issue(s) this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close the issue(s) when PR gets merged)*:
Fixes#57907
**Special notes for your reviewer**:
**Release note**:
```release-note-none
```
Automatic merge from submit-queue (batch tested with PRs 58488, 58360). If you want to cherry-pick this change to another branch, please follow the instructions <a href="https://github.com/kubernetes/community/blob/master/contributors/devel/cherry-picks.md">here</a>.
Add get volumeattachment to the node authorizer
Fixes#58355
Adds `get volumeattachment` authorization for nodes to the node authorizer when the CSI feature is enabled
```release-note
NONE
```
Automatic merge from submit-queue. If you want to cherry-pick this change to another branch, please follow the instructions <a href="https://github.com/kubernetes/community/blob/master/contributors/devel/cherry-picks.md">here</a>.
Enable privileged containers for apiserver and controller
**What this PR does / why we need it**:
In OpenStack environment, when there is no metadata service, we
look at the config drive to figure out the metadata. Since we need
to run commands like blkid, we need to ensure that api server and
kube controller are running in the privileged mode.
**Which issue(s) this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close the issue(s) when PR gets merged)*:
Fixes#47392
Fixes https://github.com/kubernetes/kubeadm/issues/588
**Special notes for your reviewer**:
**Release note**:
```release-note
Fix issue when using OpenStack config drive for node metadata
```
In OpenStack environment, when there is no metadata service, we
look at the config drive to figure out the metadata. Since we need
to run commands like blkid, we need to ensure that api server and
kube controller are running in the privileged mode.
So add a new field in MasterConfiguration for specifying that the
api server and controller manager (s) need extra privileges. Added
a TODO to remove this code when we fully yank out cloud provider
specific calls from these processes.
Automatic merge from submit-queue. If you want to cherry-pick this change to another branch, please follow the instructions <a href="https://github.com/kubernetes/community/blob/master/contributors/devel/cherry-picks.md">here</a>.
fix some bad url
**What this PR does / why we need it**:
fix some bad url
**Which issue(s) this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close the issue(s) when PR gets merged)*:
Fixes #
**Special notes for your reviewer**:
**Release note**:
```release-note
```
Automatic merge from submit-queue. If you want to cherry-pick this change to another branch, please follow the instructions <a href="https://github.com/kubernetes/community/blob/master/contributors/devel/cherry-picks.md">here</a>.
update vendor spf13/cobra to enforce required flags
**What this PR does / why we need it**:
spf13/cobra#502 has enforced checking flags that marked as required, an error will be raised if unset.
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close that issue when PR gets merged)*:fixes #54855
xref #48400fixeskubernetes/kubectl#121
**Special notes for your reviewer**:
/assign @liggitt @eparis
**Release note**:
```release-note
kubectl now enforces required flags at a more fundamental level
```
Automatic merge from submit-queue. If you want to cherry-pick this change to another branch, please follow the instructions <a href="https://github.com/kubernetes/community/blob/master/contributors/devel/cherry-picks.md">here</a>.
Support for custom tls cipher suites in api server and kubelet
**What this PR does / why we need it**:
This pull request aims to solve the problem of users not able to set custom cipher suites in the api server.
Several users have requested this given that some default ciphers are vulnerable.
There is a discussion in #41038 of how to implement this. The options are:
- Setting a fixed list of ciphers, but users will have different requirements so a fixed list would be problematic.
- Letting the user set them by parameter, this requires adding a new parameter that could be pretty long with the list of all the ciphers.
I implemented the second option, if the ciphers are not passed by parameter, the Go default ones will be used (same behavior as now).
**Which issue this PR fixes**
fixes#41038
**Special notes for your reviewer**:
The ciphers in Go tls config are constants and the ones passed by parameters are a comma-separated list. I needed to create the `type CipherSuitesFlag` to support that conversion/mapping, because i couldn't find any way to do this type of reflection in Go.
If you think there is another way to implement this, let me know.
If you want to test it out, this is a ciphers combination i tested without the weak ones:
```
TLS_RSA_WITH_AES_128_CBC_SHA256,TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256,TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256,TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305,TLS_RSA_WITH_AES_128_CBC_SHA,TLS_RSA_WITH_AES_256_CBC_SHA,TLS_RSA_WITH_AES_128_GCM_SHA256,TLS_RSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA,TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA,TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA,TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA
```
If this is merged i will implement the same for the Kubelet.
**Release note**:
```release-note
kube-apiserver and kubelet now support customizing TLS ciphers via a `--tls-cipher-suites` flag
```
Automatic merge from submit-queue. If you want to cherry-pick this change to another branch, please follow the instructions <a href="https://github.com/kubernetes/community/blob/master/contributors/devel/cherry-picks.md">here</a>.
Enable ValidatingAdmissionWebhook and MutatingAdmissionWebhook in kubeadm from v1.9
**What this PR does / why we need it**:
Since 1.9, `ValidatingAdmissionWebhook` and `MutatingAdmissionWebhook` are beta. Kubeadm should enable them by default.
**Which issue(s) this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close the issue(s) when PR gets merged)*:
Fixeskubernetes/kubeadm#642
**Special notes for your reviewer**:
/assign @luxas
/cc @kubernetes/sig-cluster-lifecycle-pr-reviews
**Release note**:
```release-note
Enable ValidatingAdmissionWebhook and MutatingAdmissionWebhook in kubeadm from v1.9
```
Automatic merge from submit-queue (batch tested with PRs 58411, 58407, 52863). If you want to cherry-pick this change to another branch, please follow the instructions <a href="https://github.com/kubernetes/community/blob/master/contributors/devel/cherry-picks.md">here</a>.
low hanging fruit for using cobra commands
This makes the simple updates to use cobra commands instead of individual ones
/assign liggitt
/assign ncdc
/assign sttts
Automatic merge from submit-queue (batch tested with PRs 58375, 58306, 58386, 57420, 58035). If you want to cherry-pick this change to another branch, please follow the instructions <a href="https://github.com/kubernetes/community/blob/master/contributors/devel/cherry-picks.md">here</a>.
Track run status explicitly rather than non-nil check on stopCh
Fixes#57044
GC and quota controllers use a non-nil stop channel as a signal Run() has been called, so ensure that condition holds even when a nil stop channel is passed in
```release-note
NONE
```
Automatic merge from submit-queue. If you want to cherry-pick this change to another branch, please follow the instructions <a href="https://github.com/kubernetes/community/blob/master/contributors/devel/cherry-picks.md">here</a>.
Allow version arg to be optional in "kubeadm upgrade apply"
**What this PR does / why we need it**:
This PR make the version arg optional if --config is specified and .KuberneteVersion is available.
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes #
fixes https://github.com/kubernetes/kubeadm/issues/460
**Special notes for your reviewer**:
```release-note
Allow version arg in kubeadm upgrade apply to be optional if config file already have version info
```
Automatic merge from submit-queue. If you want to cherry-pick this change to another branch, please follow the instructions <a href="https://github.com/kubernetes/community/blob/master/contributors/devel/cherry-picks.md">here</a>.
Add comments for explaining the group/version fields
**What this PR does / why we need it**:
This PR adds comments for explaining group/version fields. This is my understanding of what @deads2k told me today. Please, correct me if I'm wrong or you see how it can be further improved.
I didn't find where it's documented, so I hope that this PR makes it easy for other new contributors addition of new APIs.
**Release note**:
```release-note
NONE
```
PTAL @deads2k
CC @simo5
Automatic merge from submit-queue. If you want to cherry-pick this change to another branch, please follow the instructions <a href="https://github.com/kubernetes/community/blob/master/contributors/devel/cherry-picks.md">here</a>.
use shared informers for BootstrapSigner controller
**What this PR does / why we need it**:
fix TODO: Switch to shared informers
**Which issue(s) this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close the issue(s) when PR gets merged)*:
Fixes #
**Special notes for your reviewer**:
**Release note**:
```release-note
NONE
```
Add a new Alpha Feature to set a maximum number of pids per Pod.
This is to allow the use case where cluster administrators wish
to limit the pids consumed per pod (example when running a CI system).
By default, we do not set any maximum limit, If an administrator wants
to enable this, they should enable `SupportPodPidsLimit=true` in the
`--feature-gates=` parameter to kubelet and specify the limit using the
`--pod-max-pids` parameter.
The limit set is the total count of all processes running in all
containers in the pod.
Automatic merge from submit-queue. If you want to cherry-pick this change to another branch, please follow the instructions <a href="https://github.com/kubernetes/community/blob/master/contributors/devel/cherry-picks.md">here</a>.
Print the full path of Kubeconfig files.
**What this PR does / why we need it**:
kubeadm init:
```
[kubeconfig] Wrote KubeConfig file to disk: "admin.conf"
[kubeconfig] Wrote KubeConfig file to disk: "kubelet.conf"
[kubeconfig] Wrote KubeConfig file to disk: "controller-manager.conf"
[kubeconfig] Wrote KubeConfig file to disk: "scheduler.conf"
```
It'd be good to print the path of the KubeConfig files in case users want to view the content of these files.
**Which issue(s) this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close the issue(s) when PR gets merged)*:
Fixes https://github.com/kubernetes/kubeadm/issues/656
**Special notes for your reviewer**:
**Release note**:
```release-note
NONE
```
Automatic merge from submit-queue. If you want to cherry-pick this change to another branch, please follow the instructions <a href="https://github.com/kubernetes/community/blob/master/contributors/devel/cherry-picks.md">here</a>.
make controller port exposure optional
Makes it possible to disable the http server part of controllers if a user wishes.
Automatic merge from submit-queue (batch tested with PRs 57733, 57613, 57953). If you want to cherry-pick this change to another branch, please follow the instructions <a href="https://github.com/kubernetes/community/blob/master/contributors/devel/cherry-picks.md">here</a>.
Explicit kubelet flags
The Kubelet was using the global flag set.
Libraries also often use the global flag set.
There are flags in the Kubelet's usage statement for which the Kubelet does not control registration.
This is bad, we must have full control of our command-line API.
This PR puts a stop to it.
I worked through the Kubelet's usage printout and tracked down the flags.
In the below list, flags with checkboxes are one of:
- explicitly **registered** in this PR
- thought about and outright **rejected**
- thought about and **registered-deprecated** for legacy reasons
For the others we need to figure out whether they should be **registered** or **rejected** or **registered-deprecated**.
### cadvisor:
grep commands, for reference:
```
# flag definitions in cadvisor
git grep -E "\"application_metrics_count_limit\"|\"boot_id_file\"|\"container_hints\"|\"containerd\"|\"docker\"|\"docker_env_metadata_whitelist\"|\"docker_only\"|\"docker_root\"|\"docker-tls\"|\"docker-tls-ca\"|\"docker-tls-cert\"|\"docker-tls-key\"|\"enable_load_reader\"|\"event_storage_age_limit\"|\"event_storage_event_limit\"|\"global_housekeeping_interval\"|\"housekeeping_interval\"|\"log_cadvisor_usage\"|\"machine_id_file\"|\"storage_driver_buffer_duration\"|\"storage_driver_db\"|\"storage_driver_host\"|\"storage_driver_password\"|\"storage_driver_secure\"|\"storage_driver_table\"|\"storage_driver_user\"" -- vendor/github.com/google/cadvisor
# flag invocations
git grep -E "\--application_metrics_count_limit|--boot_id_file|--container_hints|--containerd|--docker|--docker_env_metadata_whitelist|--docker_only|--docker_root|--docker_tls|--docker_tls_ca|--docker_tls_cert|--docker_tls_key|--enable_load_reader|--event_storage_age_limit|--event_storage_event_limit|--global_housekeeping_interval|--housekeeping_interval|--log_cadvisor_usage|--machine_id_file|--storage_driver_buffer_duration|--storage_driver_db|--storage_driver_host|--storage_driver_password|--storage_driver_secure|--storage_driver_table|--storage_driver_user" -- ':(exclude)pkg/generated/bindata.go' ':(exclude)Godeps' ':(exclude)CHANGELOG*' ':(exclude)vendor'
# normalized flag invocations
git grep -E "\--application-metrics-count-limit|--boot-id-file|--container-hints|--containerd|--docker|--docker-env-metadata-whitelist|--docker-only|--docker-root|--docker-tls|--docker-tls-ca|--docker-tls-cert|--docker-tls-key|--enable-load-reader|--event-storage-age-limit|--event-storage-event-limit|--global-housekeeping-interval|--housekeeping-interval|--log-cadvisor-usage|--machine-id-file|--storage-driver-buffer-duration|--storage-driver-db|--storage-driver-host|--storage-driver-password|--storage-driver-secure|--storage-driver-table|--storage-driver-user" -- ':(exclude)pkg/generated/bindata.go' ':(exclude)Godeps' ':(exclude)CHANGELOG*' ':(exclude)vendor'
# flag names
git grep -E "application_metrics_count_limit|boot_id_file|container_hints|containerd|docker|docker_env_metadata_whitelist|docker_only|docker_root|docker_tls|docker_tls_ca|docker_tls_cert|docker_tls_key|enable_load_reader|event_storage_age_limit|event_storage_event_limit|global_housekeeping_interval|housekeeping_interval|log_cadvisor_usage|machine_id_file|storage_driver_buffer_duration|storage_driver_db|storage_driver_host|storage_driver_password|storage_driver_secure|storage_driver_table|storage_driver_user" ':(exclude)pkg/generated/bindata.go' ':(exclude)Godeps' ':(exclude)CHANGELOG*' ':(exclude)vendor'
# normalized flag names
git grep -E "application-metrics-count-limit|boot-id-file|container-hints|containerd|docker|docker-env-metadata-whitelist|docker-only|docker-root|docker-tls|docker-tls-ca|docker-tls-cert|docker-tls-key|enable-load-reader|event-storage-age-limit|event-storage-event-limit|global-housekeeping-interval|housekeeping-interval|log-cadvisor-usage|machine-id-file|storage-driver-buffer-duration|storage-driver-db|storage-driver-host|storage-driver-password|storage-driver-secure|storage-driver-table|storage-driver-user" ':(exclude)pkg/generated/bindata.go' ':(exclude)Godeps' ':(exclude)CHANGELOG*' ':(exclude)vendor'
# normalized and underscore names combined
git grep -E "application_metrics_count_limit|boot_id_file|container_hints|containerd|docker|docker_env_metadata_whitelist|docker_only|docker_root|docker_tls|docker_tls_ca|docker_tls_cert|docker_tls_key|enable_load_reader|event_storage_age_limit|event_storage_event_limit|global_housekeeping_interval|housekeeping_interval|log_cadvisor_usage|machine_id_file|storage_driver_buffer_duration|storage_driver_db|storage_driver_host|storage_driver_password|storage_driver_secure|storage_driver_table|storage_driver_user|application-metrics-count-limit|boot-id-file|container-hints|containerd|docker-env-metadata-whitelist|docker-only|docker-root|docker-tls|docker-tls-ca|docker-tls-cert|docker-tls-key|enable-load-reader|event-storage-age-limit|event-storage-event-limit|global-housekeeping-interval|housekeeping-interval|log-cadvisor-usage|machine-id-file|storage-driver-buffer-duration|storage-driver-db|storage-driver-host|storage-driver-password|storage-driver-secure|storage-driver-table|storage-driver-user" ':(exclude)pkg/generated/bindata.go' ':(exclude)Godeps' ':(exclude)CHANGELOG*' ':(exclude)vendor'
```
- [x] --docker-root (**registered** - this is used in `cluster/saltbase/salt/kubelet/default`)
- [x] --housekeeping-interval (**registered** - e2e node tests rely on this (`test/e2e_node/resource_collector.go`))
- [x] --application-metrics-count-limit (**registered-deprecated** - temporarily register for legacy)
- [x] --boot-id-file (**registered-deprecated** - temporarily register for legacy)
- [x] --container-hints (**registered-deprecated** - temporarily register for legacy)
- [x] --containerd (**registered-deprecated** - temporarily register for legacy)
- [x] --docker (**registered-deprecated** - temporarily register for legacy)
- [x] --docker-env-metadata-whitelist (**registered-deprecated** - temporarily register for legacy)
- [x] --docker-only (**registered-deprecated** - temporarily register for legacy)
- [x] --docker-tls (**registered-deprecated** - temporarily register for legacy)
- [x] --docker-tls-ca (**registered-deprecated** - temporarily register for legacy)
- [x] --docker-tls-cert (**registered-deprecated** - temporarily register for legacy)
- [x] --docker-tls-key (**registered-deprecated** - temporarily register for legacy)
- [x] --enable-load-reader (**registered-deprecated** - temporarily register for legacy)
- [x] --event-storage-age-limit (**registered-deprecated** - the Kubelet overrides the default via the global flagset (`pkg/kubelet/cadvisor/cadvisor_linux.go`), but nothing else in core repo provides)
- [x] --event-storage-event-limit (**registered-deprecated** - the Kubelet overrides the default via the global flagset (`pkg/kubelet/cadvisor/cadvisor_linux.go`), but nothing else in core repo provides)
- [x] --global-housekeeping-interval (**registered-deprecated** - temporarily register for legacy)
- [x] --log-cadvisor-usage (**registered-deprecated** - temporarily register for legacy)
- [x] --machine-id-file (**registered-deprecated** - temporarily register for legacy)
- [x] --storage-driver-user (**registered-deprecated** - temporarily register for legacy)
- [x] --storage-driver-password (**registered-deprecated** - temporarily register for legacy)
- [x] --storage-driver-host (**registered-deprecated** - temporarily register for legacy)
- [x] --storage-driver-db (**registered-deprecated** - temporarily register for legacy)
- [x] --storage-driver-table (**registered-deprecated** - temporarily register for legacy)
- [x] --storage-driver-secure (**registered-deprecated** - temporarily register for legacy)
- [x] --storage-driver-buffer-duration (**registered-deprecated** - temporarily register for legacy)
### pkg/apiserver/util/logs:
- [x] --log-flush-frequency (**registered** - like the glog flags, this is probably useful)
### pkg/credentialprovider/azure/azure_credentials.go:
- [x] --azure-container-registry-config (**registered** - This isn't quite as straightforward as --google-json-key, because the file it points to isn't static. For now we will just register, and we will deprecate it when there is an alternative. See below comments.)
### pkg/credentialprovider/gcp/jwt.go:
- [x] --google-json-key (**registered-deprecated** - This is really old legacy stuff to allow kubelets to authenticate with gcr (see: d5e0054eb0). See @liggit's below comment for what should be used instead.)
### pkg/cloudprovider/providers/gce/gce_loadbalancer.go:
- [x] --cloud-provider-gce-lb-src-cidrs (**rejected** - Kubelet doesn't need to know about the cidrs that were opened in the firewall for the load balancer)
### glog:
I registered all of these, since this logging library is used pretty much everywhere in the Kubelet, and all of its toggles are probably useful.
- [x] --logtostderr (**registered**)
- [x] --alsologtostderr (**registered**)
- [x] -v, --v (**registered**)
- [x] --stderrthreshold (**registered**)
- [x] --vmodule (**registered**)
- [x] --log-backtrace-at (**registered**)
- [x] --log-dir (**registered**)
### verflag:
This is how you get the Kubelet's version, absolutely necessary to register this.
- [x] --version (**registered**)
```release-note
The Kubelet now explicitly registers all of its command-line flags with an internal flagset, which prevents flags from third party libraries from unintentionally leaking into the Kubelet's command-line API. Many unintentionally leaked flags are now marked deprecated, so that users have a chance to migrate away from them before they are removed. One previously leaked flag, --cloud-provider-gce-lb-src-cidrs, was entirely removed from the Kubelet's command-line API, because it is irrelevant to Kubelet operation.
```
Thanks to @liggitt for being surprised that we didn't already do this.
Thanks to @dashpole for realizing cadvisor flags were leaked after seeing #55863.
Thanks to @tallclair who recognized this problem a long time ago in #19432.
This explicitly registers Kubelet flags from libraries that were
registering flags globally, and stops parsing the global flag set.
In general, we should always be explicit about flags we register
and parse, so that we maintain control over our command-line API.
Automatic merge from submit-queue (batch tested with PRs 56290, 57984). If you want to cherry-pick this change to another branch, please follow the instructions <a href="https://github.com/kubernetes/community/blob/master/contributors/devel/cherry-picks.md">here</a>.
kubeadm: more random tokens
The strategy of hex encoding a random byte array only uses the
following characters:
0123456789abcdef
Instead of the entire bootstrapping token character set:
0123456789abcdefghijklmnopqrstuvwxyz
Update the token generation to use the entire character set. This
increases the token secret from 48 bits of entropy to ~82 bits.
256^8 (1.8e+19) vs. 36^16 (7.9e+24).
Noticed this writing https://github.com/kubernetes-incubator/bootkube/pull/663
```release-note
NONE
```
/cc @mattmoyer @luxas
Automatic merge from submit-queue (batch tested with PRs 56290, 57984). If you want to cherry-pick this change to another branch, please follow the instructions <a href="https://github.com/kubernetes/community/blob/master/contributors/devel/cherry-picks.md">here</a>.
Refactoring ValidateUsages for bootstrap tokens.
**What this PR does / why we need it**:
Refactoring and cleanup.
**Which issue(s) this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close the issue(s) when PR gets merged)*:
Fixes #
**Special notes for your reviewer**:
/cc @luxas @jbeda
**Release note**:
```release-note
NONE
```
The strategy of hex encoding a random byte array only uses the
following characters:
0123456789abcdef
Instead of the entire bootstrapping token character set:
0123456789abcdefghijklmnopqrstuvwxyz
Update the token generation to use the entire character set. This
increases the token secret from 48 bits of entropy to ~82 bits.
256^8 (1.8e+19) vs. 36^16 (7.9e+24).
Automatic merge from submit-queue. If you want to cherry-pick this change to another branch, please follow the instructions <a href="https://github.com/kubernetes/community/blob/master/contributors/devel/cherry-picks.md">here</a>.
Remove mikedanese from kubeadm owners since he's no longer actively working on the project
**What this PR does / why we need it**: OWNERS file cleanup.
**Release note**:
```release-note
NONE
```
Automatic merge from submit-queue. If you want to cherry-pick this change to another branch, please follow the instructions <a href="https://github.com/kubernetes/community/blob/master/contributors/devel/cherry-picks.md">here</a>.
Fix `kubeadm upgrade` error while CoreDNS is installed
**What this PR does / why we need it**:
In the scenario when I have CoreDNS installed via `kubeadm init` and I want to continue using CoreDNS after `kubeadm upgrade`, the upgrade is unsuccessful and it gives an error.
**Which issue(s) this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close the issue(s) when PR gets merged)*:
Fixeskubernetes/kubeadm#641
**Special notes for your reviewer**:
**Release note**:
```release-note
NONE
```
Automatic merge from submit-queue. If you want to cherry-pick this change to another branch, please follow the instructions <a href="https://github.com/kubernetes/community/blob/master/contributors/devel/cherry-picks.md">here</a>.
Move scheduler out of plugin directory
**What this PR does / why we need it**:
**Which issue(s) this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close the issue(s) when PR gets merged)*:
This is but one step toward resolving the referenced issue.
/ref #57579
**Special notes for your reviewer**:
**Release note**:
```release-note
Default scheduler code is moved out of the plugin directory.
plugin/pkg/scheduler -> pkg/scheduler
plugin/cmd/kube-scheduler -> cmd/kube-scheduler
```
/sig scheduling
Automatic merge from submit-queue. If you want to cherry-pick this change to another branch, please follow the instructions <a href="https://github.com/kubernetes/community/blob/master/contributors/devel/cherry-picks.md">here</a>.
kubeadm: set kube-apiserver advertise address using downward API
**What this PR does / why we need it**:
Sets kube-apiserver --advertise-address using downward API for self-hosted Kubernetes with kubeadm.
**Which issue(s) this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close the issue(s) when PR gets merged)*:
Fixes # https://github.com/kubernetes/kubeadm/issues/400
**Special notes for your reviewer**:
@luxas mentioned something about losing the ability to customize advertise address via kubeadm, didn't really take that into consideration yet but I can definitely make the necessary changes if needed.
**Release note**:
```release-note
kubeadm: set kube-apiserver advertise address using downward API
```
This moves plugin/pkg/scheduler to pkg/scheduler and
plugin/cmd/kube-scheduler to cmd/kube-scheduler.
Bulk of the work was done with gomvpkg, except for kube-scheduler main
package.
