iptables-restore requires that if you change any rule in a chain, you
have to rewrite the entire chain. But if you avoid mentioning a chain
at all, it will leave it untouched. Take advantage of this by not
rewriting the SVC, SVL, EXT, FW, and SEP chains for services that have
not changed since the last sync, which should drastically cut down on
the size of each iptables-restore in large clusters.
Level 4 is mean for debug operations.
The default level use to be level 2, on clusters with a lot of
Services this means that the kube-proxy will generate a lot of
noise on the logs, with the performance penalty associated to
it.
Update the IPVS proxier to have a bool `initialSync` which is set to
true when a new proxier is initialized and then set to false on all
syncs. This lets us run startup-only logic, which subsequently lets us
update the realserver only when needed and avoiding any expensive
operations.
Signed-off-by: Sanskar Jaiswal <jaiswalsanskar078@gmail.com>
If the user passes "--proxy-mode ipvs", and it is not possible to use
IPVS, then error out rather than falling back to iptables.
There was never any good reason to be doing fallback; this was
presumably erroneously added to parallel the iptables-to-userspace
fallback (which only existed because we had wanted iptables to be the
default but not all systems could support it).
In particular, if the user passed configuration options for ipvs, then
they presumably *didn't* pass configuration options for iptables, and
so even if the iptables proxy is able to run, it is likely to be
misconfigured.
Back when iptables was first made the default, there were
theoretically some users who wouldn't have been able to support it due
to having an old /sbin/iptables. But kube-proxy no longer does the
things that didn't work with old iptables, and we removed that check a
long time ago. There is also a check for a new-enough kernel version,
but it's checking for a feature which was added in kernel 3.6, and no
one could possibly be running Kubernetes with a kernel that old. So
the fallback code now never actually falls back, so it should just be
removed.
- Run hack/update-codegen.sh
- Run hack/update-generated-device-plugin.sh
- Run hack/update-generated-protobuf.sh
- Run hack/update-generated-runtime.sh
- Run hack/update-generated-swagger-docs.sh
- Run hack/update-openapi-spec.sh
- Run hack/update-gofmt.sh
Signed-off-by: Davanum Srinivas <davanum@gmail.com>
The proxies watch node labels for topology changes, but node labels
can change in bursts especially in larger clusters. This causes
pressure on all proxies because they can't filter the events, since
the topology could match on any label.
Change node event handling to queue the request rather than immediately
syncing. The sync runner can already handle short bursts which shouldn't
change behavior for most cases.
Signed-off-by: Dan Williams <dcbw@redhat.com>
Part of reorganizing the syncProxyRules loop to do:
1. figure out what chains are needed, mark them in activeNATChains
2. write servicePort jump rules to KUBE-SERVICES/KUBE-NODEPORTS
3. write servicePort-specific chains (SVC, SVL, EXT, FW, SEP)
This moves the FW chain creation to the end (rather than having it in
the middle of adding the jump rules for the LB IPs).
Part of reorganizing the syncProxyRules loop to do:
1. figure out what chains are needed, mark them in activeNATChains
2. write servicePort jump rules to KUBE-SERVICES/KUBE-NODEPORTS
3. write servicePort-specific chains (SVC, SVL, EXT, FW, SEP)
This fixes the jump rules for internal traffic. Previously we were
handling "jumping from kubeServices to internalTrafficChain" and
"adding masquerade rules to internalTrafficChain" in the same place.
Part of reorganizing the syncProxyRules loop to do:
1. figure out what chains are needed, mark them in activeNATChains
2. write servicePort jump rules to KUBE-SERVICES/KUBE-NODEPORTS
3. write servicePort-specific chains (SVC, SVL, EXT, FW, SEP)
This fixes the handling of the EXT chain.
Part of reorganizing the syncProxyRules loop to do:
1. figure out what chains are needed, mark them in activeNATChains
2. write servicePort jump rules to KUBE-SERVICES/KUBE-NODEPORTS
3. write servicePort-specific chains (SVC, SVL, EXT, FW, SEP)
This fixes the handling of the SVC and SVL chains. We were already
filling them in at the end of the loop; this fixes it to create them
at the bottom of the loop as well.
Part of reorganizing the syncProxyRules loop to do:
1. figure out what chains are needed, mark them in activeNATChains
2. write servicePort jump rules to KUBE-SERVICES/KUBE-NODEPORTS
3. write servicePort-specific chains (SVC, SVL, EXT, FW, SEP)
This fixes the handling of the endpoint chains. Previously they were
handled entirely at the top of the loop. Now we record which ones are
in use at the top but don't create them and fill them in until the
bottom.
We figure out early on whether we're going to end up outputting no
endpoints, so update the metrics then.
(Also remove a redundant feature gate check; svcInfo already checks
the ServiceInternalTrafficPolicy feature gate itself and so
svcInfo.InternalPolicyLocal() will always return false if the gate is
not enabled.)
Rather than marking packets to be dropped in the "nat" table and then
dropping them from the "filter" table later, just use rules in
"filter" to drop the packets we don't like directly.
Re-sync the rules from TestOverallIPTablesRulesWithMultipleServices to
make sure we're testing all the right kinds of rules. Remove a
duplicate copy of the KUBE-MARK-MASQ and KUBE-POSTROUTING rules.
Update the "REJECT" test to use the new svc6 from
TestOverallIPTablesRulesWithMultipleServices. (Previously it had used
a modified version of TOIPTRWMS's svc3.)
svc2b was using the same ClusterIP as svc3; change it and rename the
service to svc5 to make everything clearer.
Move the test of LoadBalancerSourceRanges from svc2 to svc5, so that
svc2 tests the rules for dropping packets due to
externalTrafficPolicy, and svc5 tests the rules for dropping packets
due to LoadBalancerSourceRanges, rather than having them both mixed
together in svc2.
Add svc6 with no endpoints.
"iptables-save" takes several seconds to run on machines with lots of
iptables rules, and we only use its result to figure out which chains
are no longer referenced by any rules. While it makes things less
confusing if we delete unused chains immediately, it's not actually
_necessary_ since they never get called during packet processing. So
in large clusters, make it so we only clean up chains periodically
rather than on every sync.
We don't need to parse out the counter values from the iptables-save
output (since they are always 0 for the chains we care about). Just
parse the chain names themselves.
Also, all of the callers of GetChainLines() pass it input that
contains only a single table, so just assume that, rather than
carefully parsing only a single table's worth of the input.
The iptables and ipvs proxies have code to try to preserve certain
iptables counters when modifying chains via iptables-restore, but the
counters in question only actually exist for the built-in chains (eg
INPUT, FORWARD, PREROUTING, etc), which we never modify via
iptables-restore (and in fact, *can't* safely modify via
iptables-restore), so we are really just doing a lot of unnecessary
work to copy the constant string "[0:0]" over from iptables-save
output to iptables-restore input. So stop doing that.
Also fix a confused error message when iptables-save fails.
