Add a new `fd: Option<i32>` field to DeviceConfig so a caller can
supply a pre-opened vfio cdev FD (e.g. /dev/vfio/devices/vfioN) in
addition to the existing sysfs path. The CLI `--device` option now
accepts `fd=<n>`, parsed alongside the existing options.
Signed-off-by: Bo Chen <bchen@crusoe.ai>
Assisted-by: Claude:Opus-4.7
Relax DeviceConfig::path from PathBuf to Option<PathBuf> in preparation
to accept an externally-opened vfio cdev FD. The parser and OpenAPI spec
still enforces that `path` is set, so callers see no behavior change.
Signed-off-by: Bo Chen <bchen@crusoe.ai>
Assisted-by: Claude:Opus-4.7
Update the seccomp filter for vmm and vcpu thread, because `Drop for
VfioIommufd` since vfio-ioctls v0.6.1 now issues IOMMU_DESTROY
to release the IOAS allocated for each VM boot.
Signed-off-by: Bo Chen <bchen@crusoe.ai>
Submit a head only virtio-blk chain, confirm Request::parse rejects
it, and verify that add_used with len 0 returns the head to the
guest by advancing the used ring index.
Assisted-by: Claude:Opus-4.7
Signed-off-by: Anatol Belski <anbelski@linux.microsoft.com>
When Request::parse failed, for example for a chain containing only
the head descriptor, process_queue_submit returned the error via
`?`. The caller process_queue_submit_and_signal swallowed
Error::RequestParsing with a warn! and returned Ok(()), but
queue.iter().next() had already consumed the head from the avail
ring. The head was never written to the used ring, so the descriptor
slot leaked and the queue could be stalled by a guest that keeps
submitting malformed chains.
Handle the parse error in line. Log a warning, add the head to the
used ring with len 0, reenable notifications, and continue draining
the queue. A VIRTIO_BLK_S_IOERR status cannot be written because the
status descriptor address is exactly what failed to parse.
Signed-off-by: Anatol Belski <anbelski@linux.microsoft.com>
Introducing a new enum that models the various states of VM ownership
from the perspective of the VMM.
This is an important prerequisite for the asynchronization of the
migration, where the ownership of the Vm struct is transferred to the
migration thread. Specifically, this allows to introduces a new
"Migration(ThreadHandle)" variant and all existing match statements
can be easily extended to react accordingly.
On-behalf-of: SAP philipp.schuster@sap.com
Signed-off-by: Philipp Schuster <philipp.schuster@cyberus-technology.de>
By redirecting VHDx I/O through the AlignedFile the required RMW
semantics can be achieved for writes less than the logical block size
whilt reusing the same logic used for other backend implementations.
Assisted-by: Claude:Opus-4.8
Signed-off-by: Rob Bradford <rbradford@meta.com>
Reuse the functionality in the AlignedFile wrapper for the QCOW RawFile
wrapper. This makes alignment handling more transparent.
Assisted-by: Claude:Opus-4.8
Signed-off-by: Rob Bradford <rbradford@meta.com>
Provide a single home for O_DIRECT alignment and RMW behavior behind an
std::os::unix::fs::FileExt implementation built on AlignedBuffer.
Unaligned requests are bounced through an AlignedBuffer (applying RMW
for writes) and aligned requests pass straight through to the inner
File.
Assisted-by: Claude:Opus-4.8
Signed-off-by: Rob Bradford <rbradford@meta.com>
Replace the use of the pread64/pwrite64 helpers with versions from
std::os::unix::fs::FileExt.
As this was the last use of these pread functions remove them and their
tests.
Assisted-by: Claude:Opus-4.6
Signed-off-by: Rob Bradford <rbradford@meta.com>
Replace the qcow specific AlignedBuf along with the pread64/pwrite64
helpers with the new common AlignedBuffer implementation.
Assisted-by: Claude:Opus-4.6
Signed-off-by: Rob Bradford <rbradford@meta.com>
Replace use of raw pread64/pwrite64 functions with
std::os::unix::fs::FileExt for I/O without a cursor.
Assisted-by: Claude:Opus-4.6
Signed-off-by: Rob Bradford <rbradford@meta.com>
Replace the manual alloc_zeroed/dealloc and pread64/pwrite64 with use of
the new AlignedBuffer structure.
Assisted-by: Claude:Opus-4.6
Signed-off-by: Rob Bradford <rbradford@meta.com>
The block code repeatedly open-codes O_DIRECT alignment calculations and
bounce-buffer allocation at each I/O site. Add an AlignedBuffer struct
that handles the alignment and allocation in one place, using FileExt
(read_exact_at and write_all_at) for the I/O (so no need for custom libc
wrappers).
The caller creates an AlignedBuffer with an offset, length and
alignment, then uses read_from and write_to for aligned I/O and as_slice
and as_mut_slice to access the logical data portion within the aligned
region.
This is a lot like the AlignedBuf that was already existing in the QCOW2
code but is a more generalised version.
Assisted-by: Claude:Opus-4.6
Signed-off-by: Rob Bradford <rbradford@meta.com>
Implement std::os::unix::fs::FileExt for RawFile by delegating to the
inner File. This enables callers holding a reference to a RawFile to use
read_exact_at and write_all_at directly for non-cursor I/O (like pread,
etc) without going through custom helper functions.
Assisted-by: Claude:Opus-4.6
Signed-off-by: Rob Bradford <rbradford@meta.com>
Import the std modules used in the crate instead of spelling the full
paths at every use site.
Signed-off-by: Henry Hrvoje Tonkovac <htonkovac@gmail.com>
Assisted-by: Claude:Opus-4.8
Import the std modules used in the crate instead of spelling the full
paths at every use site.
Signed-off-by: Henry Hrvoje Tonkovac <htonkovac@gmail.com>
Assisted-by: Claude:Opus-4.8
Import the std modules used in the crate instead of spelling the full
paths at every use site.
Signed-off-by: Henry Hrvoje Tonkovac <htonkovac@gmail.com>
Assisted-by: Claude:Opus-4.8
Import the std modules used in the crate instead of spelling the full
paths at every use site.
Signed-off-by: Henry Hrvoje Tonkovac <htonkovac@gmail.com>
Assisted-by: Claude:Opus-4.8
Import the std modules used in the crate instead of spelling the full
paths at every use site.
Signed-off-by: Henry Hrvoje Tonkovac <htonkovac@gmail.com>
Assisted-by: Claude:Opus-4.8
The Microsoft "Requirements for Implementing the Microsoft Hypervisor
Interface" document marks exactly two privileges in CPUID leaf
0x40000003 EAX as "Must be set": AccessHypercallMsrs (bit 5) and
AccessVpIndex (bit 6). Cloud Hypervisor advertised neither.
Without bit 5, Windows guests abort enlightened-mode initialization
before timer-API selection: HalpHvTimerApi is left NULL and every
QueryPerformanceCounter call falls back to reading
HV_X64_MSR_TIME_REF_COUNT (0x40000020), costing one VM exit per call.
The guest never writes HV_X64_MSR_REFERENCE_TSC (0x40000021) to enable
the reference TSC page, even though AccessPartitionReferenceTsc (bit 9)
is advertised.
With both bits set, Windows 10 22H2 and Windows 11 25H2 guests enable
the reference TSC page at boot. Measured QueryPerformanceCounter
throughput on a nested-KVM host went from ~71K calls/sec (14 us/call,
one MSR exit each) to ~1.3M calls/sec (free, no exits); on bare metal
from ~390K to ~1.9M calls/sec. Guest idle CPU and interrupt-service
time drop correspondingly.
Both MSR ranges are already handled in-kernel by KVM unconditionally,
so no backend change is needed. Bisection across the full delta to
QEMU's Hyper-V CPUID layout (vendor ID, max leaf, leaves 4-6 contents,
build number) shows bit 5 is the only load-bearing change; bit 6 is
included per the conformance document's mandate.
Signed-off-by: Tonic Li <tonic@simular.ai>
Signed-off-by: tonic <tonicbupt@gmail.com>
Import the std modules used in the crate instead of spelling the full
paths at every use site.
Signed-off-by: Henry Hrvoje Tonkovac <htonkovac@gmail.com>
Assisted-by: Claude:Opus-4.8
Cover the prior commit by constructing a Request directly and a stub
AsyncIo whose backend methods are unreachable, then submit a payload
with sector + num_sectors past u64::MAX and assert BadRequest.
Assisted-by: Claude:Opus-4.7
Signed-off-by: Anatol Belski <anbelski@linux.microsoft.com>
In Request::execute_async the WriteZeroes arm multiplied wz_sector
by SECTOR_SIZE before the checked_add of sector and num_sectors.
A wz_sector near u64::MAX overflows the multiplication.
Reorder the arm to run the checked_add and disk_nsectors check
first, matching the Discard arm above.
Signed-off-by: Anatol Belski <anbelski@linux.microsoft.com>
Import the std modules used in the crate instead of spelling the full
paths at every use site.
Signed-off-by: Henry Hrvoje Tonkovac <htonkovac@gmail.com>
Assisted-by: Claude:Opus-4.8
Import the std modules used in the disk-format handlers instead of
spelling the full paths at every use site.
Signed-off-by: Henry Hrvoje Tonkovac <htonkovac@gmail.com>
Assisted-by: Claude:Opus-4.8
During pause the block backend's async I/O path can have unfinished I/O
requests. A snapshot or migration RAM copy taken after pause returns can
then race with kernel writes and capture torn pages.
Since vCPUs are already paused, the VMM thread can stop new block
submissions and wait for the worker to drain before parking the worker
threads.
Assisted-by: Codex:GPT-5
Signed-off-by: Dylan Reid <dgreid@fb.com>
Remove stale #[allow]s whose lints no longer fire, convert the
unconditionally-firing ones to #[expect], and keep the conditional
ones as #[allow] (e.g. large_enum_variant only fires when both kvm
and mshv are enabled; a nonminimal_bool only on x86). The many
unreachable_patterns allows are feature-gated and left as #[allow].
Part of #8326.
Signed-off-by: Tushar Khatri <hello@tusharkhatri.in>
Remove stale #[allow]s whose lints no longer fire (a module-level
non_camel_case_types in mpspec, and a too_many_arguments on a riscv64
configure_system that no longer exceeds the argument threshold), and
convert the still-needed ones to #[expect].
Part of #8326.
Signed-off-by: Tushar Khatri <hello@tusharkhatri.in>
Convert the still-needed #[allow]s to #[expect] so they warn if the
lints stop firing.
Part of #8326.
Signed-off-by: Tushar Khatri <hello@tusharkhatri.in>
Since igvm is a required feature of sev_snp and also sev_snp is x86-64
only the cfg attributes at build time can be consolidated & simplified.
Signed-off-by: Rob Bradford <rbradford@meta.com>
Validate that the PCI segment specified is a valid PCI segment ID (less
than the number of segments specified) defaulting to default if no
segments are specified because no there is no platform configuration.
See: #8376
Signed-off-by: Rob Bradford <rbradford@meta.com>
This test has a copy and paste error where the PCI segment ID was being
set with no extra segments configured.
Signed-off-by: Rob Bradford <rbradford@meta.com>
This test has a copy and paste error where the PCI segment ID was being
set with no extra segments configured.
Signed-off-by: Rob Bradford <rbradford@meta.com>
Validate that all files that are necessary for TLS encryption are in the
given folder. The knowledge which files are necessary is part of the TLS
module.
On-behalf-of: SAP sebastian.eydam@sap.com
Signed-off-by: Sebastian Eydam <sebastian.eydam@cyberus-technology.de>
As we now have more than one parameter for the receive migration call,
this commit also adds parsing and validation for those parameters. We
maintain backwards compatibility by also correctly parsing the case
where the caller only provides a URL.
On-behalf-of: SAP sebastian.eydam@sap.com
Signed-off-by: Sebastian Eydam <sebastian.eydam@cyberus-technology.de>
For TLS we have to parse the hostname from the given migration URL. For
that we have to make a few assumptions about the URL (e.g. it always has
a port). To catch problems early, we tighten the URL validation.
On-behalf-of: SAP sebastian.eydam@sap.com
Signed-off-by: Sebastian Eydam <sebastian.eydam@cyberus-technology.de>
Extend ReceiveListener with a TLS-backed listener variant for migration
receivers.
Store the TCP listener together with the server TLS configuration, wrap
accepted sockets in TlsStream::new_server(), and preserver the existing
listener cloning and fd polling behavior so receive-side migration code
can treat TLS listeners like the existing TCP and UNIX cases.
On-behalf-of: SAP sebastian.eydam@sap.com
Signed-off-by: Sebastian Eydam <sebastian.eydam@cyberus-technology.de>
Teach the migration transport to handle TLS-backed streams alongside
plain TCP and UNIX sockets.
Introduce a Tls variant in SocketStream and implement the necessary
traits.
Also updates the local-migration error path to reject any non-UNIX
transport, which now includes TLS-wrapped TCP connections.
On-behalf-of: SAP sebastian.eydam@sap.com
Signed-off-by: Sebastian Eydam <sebastian.eydam@cyberus-technology.de>
TLS connections have a TLS server (listens for incoming connections) and
a TLS client (initiates the connection). This commit adds the code for
the client side, which is the sender of a migration
On-behalf-of: SAP sebastian.eydam@sap.com
Signed-off-by: Sebastian Eydam <sebastian.eydam@cyberus-technology.de>
ReadVolatile already provides a default read_volatile_exact()
implementation, and WriteVolatile a default write_volatile_exact()
implementation. Overriding these functions adds no behavioral value, but
duplicates logic and needs to be updated whenever SocketStream gains or
changes a variant.
On-behalf-of: SAP sebastian.eydam@sap.com
Signed-off-by: Sebastian Eydam <sebastian.eydam@cyberus-technology.de>
