util_fmt now provides support for JSON Lines text format. Adapt certain
checks in the code and document the newly supported format in the man
pages for lshwc and lspai accordingly.
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add command-line option --counters "AAA,BBB,...,ZZZ" to specify a
comma-separated list of counter names to display. Counter names must
match exactly, ignoring case. All counters not listed are excluded
from output.
Reviewed-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Jan Polensky <japo@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add command line option --counters XXX,YYY to specify a comma
separated list of counter names to be displayed. The counter names
have to match exactly beside case sensitivity.
All counters not listed in the list specified by the --counters option
are not shown.
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Co-developed-by: Jan Polensky <japo@linux.ibm.com>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add a command line flag '-a' to include the counter set values
from each individual CPU. Up to now only the total sum from
all CPUs was printed.
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add command line flag -d to display the counter value in form of
a delta value. This format shows the increase of that counter value
compared to the previous value.
The first line is the base for the delta calculation and always
shows 'Total'. The remaining lines show 'Delta' in the third
column.
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add command line flag -s to display the counter name in an
abbreviated form. The abbreviated form is a character for the
PAI counter set followed by a number.
PAI crypto counter set is abbreviated to 'C'.
PAI NNPA counter set is abbreviated to 'N'.
The number refers to the defined counter number ranging from
1 to X.
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add command line flags -x and -X to print counter values in
hexadecimal format with leading 0x prefix (-X) and without (-x).
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add command line flags -i (read interval) and -l (loops) to
show the counter values for the specified number of iterations.
The CPUs to read the counter values from can be specified
on the command line. If none are specified, all online CPUs
are used.
For example the command '# lspai -l 2 -i 10 -t nnpa'
displays all PAI NNPA counter values two times with 10 second
interval.
Acked-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Thomas Richter <tmricht@linux.ibm.com>
Co-developed-by: Jan Polensky <japo@linux.ibm.com>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
With version 1.23 groff/troff disabled the non-portable font CW and
started to complain about a missing CW font when previewing some of the
man pages, with messages like
$ man --warnings cpumf/man/pai.8 > /dev/null
troff:<standard input>:244: warning: cannot select font 'CW'
Use CR to replace CW.
Closes: https://github.com/ibm-s390-linux/s390-tools/pull/187
[hoeppner@linux.ibm.com: Adapt commit message]
Signed-off-by: Dan Horák <dan@danny.cz>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Introduce a new command-line option --format FORMAT to control the output
format of lshwc. Supported formats include CSV, JSON, JSON-SEQ, and key-value
PAIRS. The output is now generated using the shared util_fmt infrastructure,
enabling consistent and machine-readable output.
This change also includes:
- Label generation for counters
- Integration of util_fmt for structured formatting
- Updated man page with documentation for the new option
- Updated man page with JSON output structure documentation
- Add option (-q) to force quoting all elements.
Reference: https://www.ietf.org/rfc/rfc4180.txt
Signed-off-by: Jan Polensky <japo@linux.ibm.com>
Reviewed-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Add a command line flag to specify run time of lshwc command in
terms of days, hours, minutes and seconds. The command line flag
is named -t and has a number as argument followed by one of the
letters 's' for seconds (default), 'm' for minutes, 'h' for hours
and 'd' for days. Default is seconds when no trailing letter is
detected.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add a flag to display the counter value in form of a delta
value. This format shows the increase of that counter value
in comparison to the previous readout.
The first line is the base for the delta calculation and always
shows 'Total'. The remaining lines show 'Delta' in the third
column.
# ./lshwc -d -i 3 -l 5 -x -s :p
Date,Time,CPU,P32,P33
2024-11-27,15:45:55,Total,d7b,172
2024-11-27,15:45:58,Delta,2be403,2d58bb
2024-11-27,15:46:01,Delta,43e3b,22c41
2024-11-27,15:46:04,Delta,58e3a,35319
2024-11-27,15:46:07,Delta,5080e,2b81c
#
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Fix whatis-entries in the lshwc, lspai, and pai manpages by inlining the
tool name. The following command line can be used to test a local
manpage:
$ lexgrog -w -m cpumf/man/lshwc.8
cpumf/man/lshwc.8: "lshwc - extract CPU Measurement Facilities counter sets"
Github-ID: https://github.com/ibm-s390-linux/s390-tools/issues/170
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Pai collects data from per CPU ring buffers and stores them in the
memory mapped output file. When data is collected from many CPUs at
the same time, writing data to output file can be slow.
Improve this and allow the pai recording to run with higher
real time priority. This is the same approach as done by the perf tool.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Add lspai program and man page to display Processor Activity
Information (PAI) facility counter sets in the same way as
lscpumf for the CPU Measurement Facility counter sets.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Linux kernel commits
a029a4eab39 ("s390/cpumf: Allow concurrent access for CPU Measurement Counter Facility")
453380318ed ("s390/cpumf: Allow multiple processes to access /dev/hwc")
removed this restriction. Both commits are included in linux 5.16.
Therefore remove the restriction in the man page.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The Processor Activity Instrumentation facility (PAI) Extension 1
adds support for the counter set for Neural Network Processing Assist
(NNPA) counters.
NNPA counter values are appended as raw data to the data report.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The Processor Activity Instrumentation facility (PAI) uses the
perf_event_open system call to report data and the crypto counter
values. The data can be inspected with the perf tool in a very
generic way using raw data report and a hex dump utility.
The pai tool also uses the perf_event_open system call to record the
data, but uses specialized event attributes for recording detailed
information such as the recording of fork, exit, exec system call
events and context switch events.
Cryptography counter values are appended as raw data attachments.
The pai command can be used for recording and reporting.
Also a list of CPUs can be specified.
The recording ring buffers are created per CPU
and are named paicrypto.XXX where XXX stands for the CPU number.
The numbering scheme has leading zeros, such as 007 for CPU number 7.
For invocation and possible command line options see the man page.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Program reads complete counter sets from any CPU by opening
device /dev/hwctr which is available with linux version 5.12.
The counter sets and CPUs can be specified on the command line.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Rewrite lscpumf and chcpumf in C. The previous version
habe been written in perl which require a lot of instructure.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This commit is based on the s390-tools-1.39.0 version.
Changes on top of s390-tools-1.39.0:
- Add MIT license to all source files
- Add LICENSE file
- Transform REAMDE to README.md (markdown)
- Add AUTHORS.md file
- Add CONTRIBUTING.md file
- Move changelog from README to CHANGELOG.md file
Reviewed-by: Stefan Haberland <sth@linux.vnet.ibm.com>
Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
