Now that we know that the system uses s390x IPL and the current re-IPL
target is from FCP, whenever we get a udev event that indicates a path
state changed, we have to figure out whether it affects the path that is
currently set as re-IPL target, or goes to the same volume (so we might
use it as alternative re-IPL path).
Add a new helper `chreipl-fcp-mpath-is-ipl-tgt` for this task.
Based on the information provided in
/sys/firmware/reipl/fcp/{device,wwpn,lun} it figures out whether the
current event subject has the same triplet <Dev-Bus-ID>:<WWPN>:<LUN> (in
T10 SCSI: I_T_L nexus), or whether one of its parts (in case of
dm-multipath) has.
If true, we know for sure, that we deal with an event affecting the
current re-IPL setting, and continue.
When accessing the re-IPL firmware information a lock is taken via the
`flock` utility (from util-linux). This is done so concurrent changes
from the toolset, that are added in a later commit, don't result in
inconsistent reads.
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add second filter stage to the udev rules: only continue with the
toolset, if the system uses s390x IPL and if the current re-IPL target
is from FCP.
For the test, whether the next re-IPL target is planned to be done from
FCP, a helper `chreipl-fcp-mpath-is-reipl-zfcp` is added, and the
information in /sys/firmware/reipl/reipl_type is used.
If either one or both of the tests are not true, the udev rules will
exit.
For debugging, the toolset can be built with the Make variable `D` set
to 1 (e.g.: make D=1; make install D=1). This causes the toolset to
write shell traces of the helper to $(DEBUGOUTDIR) (per default:
/run/udev); otherwise no output is generated. `dbginfo.sh` will be
changed to collect this data automatically.
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add a new tool to s390-tools: chreipl-fcp-mpath. A toolset based on udev
to change the active re-IPL target if the current target goes into an
error-state, due to for example a pulled cable.
Add the base infrastructure consisting of a Makefile and a base set of
udev rules. Integrate the Makefile into s390-tools Make machinery.
The rules filter events base on the event subject type (dm-multipath,
scsi disk), udev action (change, or add), and device mapper action
(path failure, or path reinstated). No further processing is done right
now in case of a match; if neither of these criteria matches, the
rules exit, and the toolset won't be invoked.
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
running mpio data disks with offline paths might cause dbginfo
to hang up on the command "blockdev --report" -> we remove
it to ensure a non blocking data collection.
In addition we add a second kill step with the same timeout
value to retry stopping a command
Signed-off-by: Joern Siglen <siglen@de.ibm.com>
Reviewed-by: Mario Held <mario.held@de.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Always clear the COMMAND_LINE_EXTRA region, also in case sclp_setup()
fails. If the region is not cleared properly, there might be junk
in there after a reboot, causing confusion for the kernel later.
While we're at it, also switch to COMMAND_LINE_EXTRA_SIZE instead
of COMMAND_LINE_SIZE, since that constant is more appropriate here.
Closes: https://github.com/ibm-s390-linux/s390-tools/pull/122
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
With an upcoming patch the output target can be different to `stdout`.
Therefore, the term `ZG_ACTION_STDOUT` is no longer generic enough. In addition,
rename `do_write` to `do_copy` to match the enum name.
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Currently, for some commands (e.g. `zgetdump unmount`) unused positional
arguments are silently ignored, for some commands (`zgetdump mount`) they're
not. Therefore let's fix this by always returning an error message and exit code
if too many positional arguments are given.
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
In case the hsci tool was upgraded on a running system, it can happen
that an hsci interface exists, that was created by an older version of
the tool (and thus has no veth pair). Add support to show and delete
such an hsci interface.
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Without kernel commits
f7936b7b2663 s390/qeth: Update MACs of LEARNING_SYNC device
4e20e73e631a s390/qeth: Switchdev event handler
60bb1089467d s390/qeth: Register switchdev event handler
HSCI cannot be used with multiple MACs, but the single MAC usecase needs
to be supported even with old kernel. So manually setting the same single
MAC on hsci, HiperSockets and the external interface is still required.
The hsci itself is not a bridgeport, so a static forwarding rule in the
bridge is also required. It seems cleaner to use the initial MAC of the
veth hsci as single static MAC, than the initial MAC of the HiperSockets
interface.
Even with an updated kernel a single static MAC interface, that is not
subject to ageing and re-learning, is beneficial when hsci is used as
a single MAC interface.
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The first implementation of HSCI (HiperSockets Converged Interface)
supports only a single static MAC address per HSCI and thus constructs
like MACVTAP or OpenVSwitch cannot be used on top of it.
Kernel commits
f7936b7b2663 s390/qeth: Update MACs of LEARNING_SYNC device
4e20e73e631a s390/qeth: Switchdev event handler
60bb1089467d s390/qeth: Register switchdev event handler
changed the behaviour of a LEARNING_SYNC HiperSockets (HS) device
such that any MAC address that is added or learned on a non-isolated
bridgeport of the HSCI bridge is set on the LEARNING_SYNC HS device and
its isolated siblings.
So no new trigger is required for a HS device with the bridge attribute
LEARNING_SYNC to support multiple MACs on a northbound HSCI interface.
However the first implementation of the hsci tool uses the bridge itself
as northbound HSCI interface. This is not treated as a real bridgeport.
So we add a veth bridgeport as northern link for HSCI.
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Instead of checking for ideal starting conditions, try to achieve
the desired outcome and accept conditions that do not prevent it.
This allows the user to get to a defined state, even if the
hsci interface was manipulated by other means than the hsci tool,
e.g. by ip commands or bridge commands
Minor cleanup:
hsci show:
- display PNET_ID, even if only one hsci port has one
(e.g. if External is a bond)
- only 1 header for mulitple hscis
hsci add:
- sanitize error messages
- allow nonsense HSCI of 2 HiperSockets
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Don't include dfi_mem_chunk.h in dfi.h because not every module including
dfi.h needs it.
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Separate the definition of a struct from the declaration of a global
variable of the type. To improve readability.
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Create a separate C header for STDOUT to separate independent things and
make it more readable.
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Set DFO format after the parsing of command-line arguments is done.
The command-line argument parsing should be independent of DFO.
This improves testability of the command-line argument parsing and
separates independent things from each other.
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Make the C module responsible for the parsing of command-line arguments
independent of other global variables. This improves its testability.
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Get rid of C headers which include everything. This is bad for testing and
maintainability. C files should include only what they need and no more.
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Create a separate C header for FUSE to separate independent things and
make it more readable.
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Create a separate C header for DFI VMCOREINFO to separate
independent things and make it more readable.
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Replace magic values with descriptive names to improve readability.
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
To prevent segmentation faults when the function dfi_mem_phys_read() is
given invalid parameters, check that the given memory range falls within
a known physical memory chunk, just like it is done for dfi_mem_virt_read().
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The new name describes the purpose of the function better and
emphasizes its difference with the function dfi_mem_phys_read().
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Always use the function dfi_mem_read_rc() which verifies that the given
address and size fall within a valid memory chunk. We cannot trust
user's input.
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The function dfi_mem_chunk_virt_add() is used only internally and should
not be exported to prevent misuse.
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The keyword extern is redundant for function declarations in C headers.
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Set stage3_parms.envblk_len to 0, if add_envblk is false.
This fixes segmentation fault when performing job with
not defined zIPL environment (e.g. installing SCSI dump)
Signed-off-by: Eduard Shishkin <edward6@linux.ibm.com>
Tested-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
PCI and crypto devices defined using the IBM Z Dynamic Partition Manager
(DPM) will start in an offline/unconfigured state that requires manual
intervention before the associated Linux function can be used. This
results for example in PCI networking interfaces being unavailable in a
distribution installer system.
Fix this by providing a udev rule and initial RAM-disk logic that
automatically enables PCI and crypto devices either during boot, or when
they are defined at run-time. This processing can be suppressed by
specifying the "rd.zdev=no-auto" parameter on the kernel command line.
Auto-configuration is limited to Linux running in DPM LPARs because
PCI-functions and crypto devices defined by DPM are always intended for
use by a single LPAR only.
For Linux running in classic-mode LPARs or virtual machines, leaving PCI
and crypto devices in an offline state may be useful to allow defining a
device as available to multiple systems, where only the system that
intends to make use of the device should enable it.
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add an internal tool intended to be used by udev rules to determine
zdev and hypervisor related system information in key=value format.
Supported keys are:
ZDEV_NEST_LEVEL=n
Virtualization nesting level of running system
ZDEV_HYPERVISOR_<n>=LPAR|z/VM|KVM/Linux
Type of hypervisor that provides virtualization at nesting level <n>
ZDEV_IS_DPM=0|1
Indicator if top-level LPAR is managed by Dynamic Partition Manager
ZDEV_NO_AUTO=0|1
Indicator if auto-configuration is requested
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
zgetdump is for analyzing VM coredumps and not user space coredumps therefore
return an error in case of a user space coredump.
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add new tool named 'sclpdbf'. This script displays the contents of
s390dbf sclp debug logs in human-readable format.
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Added a tool to operate with zIPL environment, currently
installed in the boot record. All modifying operations result
in atomic update of the installed environment block, bypassing
the file system driver.
Operations currently supported by zIPL environment editor:
. set/unset environment variables,
. print/reset environment
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Eduard Shishkin <edward6@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
from disk.c to a dedicated source file fs-map.c, so that the new
zipl-editenv tool will be also able to use it.
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Eduard Shishkin <edward6@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Before starting the kernel:
1. parse environment block (if any) and create a hash table
of all found pairs (NAME, VALUE);
2. scan the command line, which already contains extra-parameters
(if any), and for each found ${NAME} replace it with VALUE, as
found in the hash table by NAME.
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Eduard Shishkin <edward6@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
When installing a boot record for "ipl" and "menu" job, always add
an environment block as a boot component located in bootmap file
at offset alinged on file system block size boundary. When adding,
first try to import environment from a file at location specified
by newly introduced "--environment" zipl option, or by default at
"/etc/ziplenv". If nothing was imported, then add a blank environment
block. Optionally print the content of the environment block.
Store environment block size and address (as of boot component) in
stage3_parms.
Change interface of add_ipl_program(): add 2 additional arguments:
a pointer to bootmap file name and a predicate indicating if we
need to add environment block as a boot component.
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Eduard Shishkin <edward6@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Provide helper functions disk_write_block_buffer_align()
and add_component_buffer_align() to align offset of the record
on specified block size boundary and to save the offset, where
the record was made at.
This will be used by a later patch.
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Eduard Shishkin <edward6@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
. expand interface of disk_get_blocklist_from_file() to get
block pointers for a specific range of data within a file.
. provide a helper function add_component_file_range() to add a
specific range of data within a file as a boot component.
This will be used by a later patch.
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Eduard Shishkin <edward6@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
