New machine models introduce CHPIDs with two new CMG types 4 and 5.
Add support for decoding the associated channel-measurement data.
Reviewed-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Newer kernels provide the full, unfiltered Channel-Measurements
Characteristics Block (CMCB) via a new sysfs attribute named
"measurement_chars_full".
Add support for reading the full CMCB data if available in preparation
of new tool functions that will make use of this data.
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reviewed-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The utilization visualization column does not provide meaningful data
when using structured output. Omit it when an output format has been
specified on the command line.
Reviewed-by: Mete Durlu <meted@linux.ibm.com>
Signed-off-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Introduce a new command line flag ("--format") to specify the output
format in batch mode. Valid options are "pairs" for shell-compatible key
value pairs, "csv" for CSV, "json" for a formatted JSON document, and
"json-seq" for a stream of JSON text sequences as per RFC7464[1].
[1]: https://datatracker.ietf.org/doc/html/rfc7464
Note: Specifying the --format flag implies the --batch_mode flag.
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Mete Durlu <meted@linux.ibm.com>
Signed-off-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The separator line is written as part of the input processing step and
is better be moved to the place where the table is actually written.
Same goes for the terminating '\n' which is performed as the final step
while updating the terminal in batch mode.
While at it, use the designated print functions over raw printf().
Reviewed-by: Mete Durlu <meted@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
For structured output (i.e. JSON), some type information of the columns
is required, at least the ability to distinguish values that are strings
and possibly need to be quoted. Unfortunately at the time column values
are formatted this information is lost.
The column types are specified implicitly during the unit conversion of
the raw value. For example, online time is stored as a u64 value but is
converted into a "d:h:m" string.
Introduce a private flag per column that signifies if that column is to
be formatted as a string. This flag will be set in the appropriate unit
conversion function.
Reviewed-by: Mete Durlu <meted@linux.ibm.com>
Signed-off-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This type helps to perform atomic operations by writing to a temporary
file and renaming it to the actual filename when the
`AtomicFile::finish` function is called. If the `AtomicFile::finish`
function is never called, the temporary file is automatically removed
when it goes out of scope. It utilizes the `renameat2` [1] libc function
and its semantics.
[1] https://man7.org/linux/man-pages/man2/renameat.2.html
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Rename "Authenticated Encryption with Associated Data" (AEAD)
encryption/decryption functions and change the result type. This makes
the functions easier extendable. In addition, it's now possible to use
the functions as following:
`encrypt(decrypt(data)) == decrypt(encrypt(data) == data`
Add more AES and SHA related constants and use them whenever possible.
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Rename `Aes256*` to `Aes256Gcm*` and add a deprecated constant with the
old name for backward compatibility. Adapt existing code to use the new
enum variant.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Combine linker scripts for single volume and multi-volume ECKD dumpers
to avoid duplicating. Use C preprocessor to define conditional symbols.
Cleanup the generic stage2 linker script(stage2.lds). Since it is still
used for FBA and TAPE dumpers (fba2dump and tape2dump) the .stage2dump.tail
section should be preserved.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Move MVDUMP_TOOL_SIZE contsant to loaders_layout.h and rename it
to STAGE2_DUMPER_SIZE_MV.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Write the secret metadata into the same directory as the generated
secret request. Before, the metadata was accidentally written into the
working directory.
Fixes: dd82c26f87 ("rust: Add tool to manage UV-secrets")
Suggested-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Check if the SE-guests machine firmware is in an IBM approved state.
The machine firmware version can be obtained via setting a flag in the
attestation request.
The opaque 320 byte value from firmware is forwarded to an IBM server
that verifies the firmware value and confirms if the machine is in an
IBM approved firmware state.
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Add a check to verify the hash over the Secret Store in the guest UV
storage. During 'create' the user can request that hash via a flag. During
'check' the user specifies the Add Secret requests and check whether the store is
locked. If the calculated hash over this state matches the one reported
by attestation, this check is successful.
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Add a new command: check. This allows users to perform policy checks on
the Attestation result.
The host-key hashes, and the user-data can be tested for certain values.
While at it fix some typos and enable CSV parsing for the Additional-data flags.
Example:
```
pvattest check attestresp checkresult -k hkd0.crt,hkd1.crt
--host-key-check AttKeyCheck
```
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Add additional data for the Attestation request. The secret store hash
measures all added secrets and the state of the store (locked or not)
with a single hash. The hash is computed by concatenating all add-secret
request tags (16 bytes each) and a byte stating the locked state (1 for
locked, 0 for not locked). The firmware state is an opaque state
description of the systems firmware status to be interpreted by an IBM
service. Add request flags and fields in the additional data structure.
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Add an unrecognized field to the AdditionalData struct that contains any
data that is not known by the library. Generalize the intention of the
additional data read function and make extensions to Additional data
easier. Add tests for serialization.
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Rename 'ATT_ADD_HASH_SIZE' to 'PHKH_SIZE'. The new name describes the
value better. It is the size of the Public Host-Key Hash and not the
size of a generic additional-data item.
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Fix the new `cargo clippy` and `cargo doc` findings that were triggered
with the recent policy addition.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
With the recent changes in the pkey kernel module to split it up into
sub-modules, as well as the addition to support Secure Execution
retrievable secrets, an update to the list of modules to copy to
initrd is required.
Besides the pkey module itself, all its sub-modules must be copied.
Furthermore, sub-module pkey_uv requires the uvdevice modules, so copy
this, too.
While at it, remove the old drivers zcrypt_cex2a and zcrypt_pcixcc,
those are not provided anymore since at least 2 years.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Acked-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Sync all install targets implementations. Some did quote the target
directories some don't. Remove all quotations. This fixes wrong install
locations of install paths that have a '~'. With quotes '~' is
interpreted literally instead of using the home dir.
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Enables API users to get the request tag of an Add-Secret request.
This enables them to check for attestation policies.
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Allows API users to inspect the value of additional data to use it as
part of a policy check.
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
This struct is not exported. Prevent any accidental exports by reducing
the visibility to pub(crate).
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Rename the previous "default" `new` constructor [1] to `with_prefix` and
add a new default `new` constructor that takes no argument is therefore
easier to use.
In addition, improve the overall documentation, add more tests, and
examples to the code.
[1] https://doc.rust-lang.org/nomicon/constructors.html
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Use the `enum_dispatch` macro for providing the `From` and `TryInto`
functionalities. In addition, it makes dynamic dispatching using enums
much easier.
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Implement `From<SymKeyType> for Nid`. This makes it easier to implement
generalized functions.
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
This is currently the only key type supported, therefore rename the
function to make this clear. In addition, improve the documentation of
the function as function is now exported.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
