Fix a valgrind finding. Fix an invalid read/write of one byte after the
actual struct to clear. Not fixing this may result in a illegal write or
memory corruption of the program. Fortunately, for the actual only user,
pvsecret this is not the case.
Fixes: c6f621d0 ("rust: Add library for pv tools")
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Pai collects data from per CPU ring buffers and stores them in the
memory mapped output file. When data is collected from many CPUs at
the same time, writing data to output file can be slow.
Improve this and allow the pai recording to run with higher
real time priority. This is the same approach as done by the perf tool.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
in customer situation we found lsqeth listing devices like:
Device name : (unnamed net_device)
Device name : enc2000
Device name : enc3000
- the braket around the "unnamed" device is braking the function call and
leads to stop the dbginfo.sh script.
- this patch removes brakets > the functions call works and call of osaoat
will report an unknown device instead of braking the dbginfo.sh script
Reviewed-by: Mario Held <mario.held@de.ibm.com>
Signed-off-by: Joern Siglen <siglen@de.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Make the description of the --keep_volser option more generic and avoid
mentioning specific tooling.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The zipl bootloaders are s390x specific, so only build them if the
`HOST_ARCH' is set to s390x.
While at it, rename `INC_FILES` to `EMBEDDED_BOOTLOADERS`. Also
introduce `EXTERNAL_BOOTLOADERS` variable and use it in the `install`
Makefile target.
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
When checking if a card or an APQN is online, not only check the 'online'
sysfs attribute, but also check the 'config' and 'chkstop' attribute.
Cards and APQNs in check-stopped or deconfigured state can still be reported
as online via the sysfs attribute, although they are not available to be
used for zkey.
In case the 2 additional sysfs attributes are not available in sysfs, then
don't fail, but rely on the 'online' attribute only.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Move the code responsible for installing stage3.bin to the
boot/Makefile. In addition, remove the stage3.bin from the Makefile
`all` target prerequisites in src/Makefile, as zipl can be built without
it. While at it, use $(INSTALL) instead of $(CP) for the bootloader
installation.
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Linux stable kernels can reach greater than 256 sublevels [1],
which can cause the cpi tooling to generate an invalid string
that gets passed to the firmware and causes unusual responses:
$ uname -r
5.4.255
$ cat /sys/firmware/cpi/system_level
0x04260000000504ff
--reboot--
$ uname -r
5.4.256
$ cat /sys/firmware/cpi/system_level
0x4260000000504100
The first sublevel field is defined as one byte, so ensure that
a value larger than that isn't included.
[1] https://lore.kernel.org/lkml/1612534196241236@kroah.com/
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Currently ZDEV_SITE_ID is derived with the help of an additional
udev-rule, 40-zdev-id.rules. The sole purpose of this rule is to
determine the ZDEV_SITE_ID environment value with the help of zdev_id
binary. This solution is minimal, but this has some unwanted side-
effects. The zdev_id logic get executed for all the events, even
those completely unrelated to zdev/or site, and imports the unneeded
envionment values to the udev-db.
Instead of having an additional rule file, add this logic as part of
the udev-rule of those devices which are configured with site-support.
The logic will then be available on all those rules with the
site-supported devices only.
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Introduce dev_site_configured macro,which can be used to find the
availability of site configurations for the device during udev rule
creation.
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Previously SITE_FALLBACK and other site-specific configuration support
macros were defined in device.h. Instead, move them to a relatively
smaller header file which is exclusive for site-related definitions.
This way, light-weight zdev_id also can use the same header file.
Reported-by: Steffen Maier<maier@linux.ibm.com>
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Behaviour of the qeth performance_stats sysfs attribute has changed
with kernel commit
b0abc4f5df76 ("s390/qeth: overhaul ethtool statistics")
that went into kernel v5.1.
Before the kernel commit
- collection of statistics was turned on and off by writing 1 or 0
- default after device activation was 0
- statistics were reset by writing 0
After the kernel commit:
- collection is always on
- attribute always reads 1
- statistics is reset by writing 1; writing 0 is a no-op
Problems of chzdev on new kernels:
chzdev cannot reset statistics ('performance_stats=1' does nothing).
'chzdev --export' always lists performance_stats.
'chzdev qeth --help-attribute performance_stats' reflects old behaviour.
This patch will do the following:
'chzdev qeth --help-attribute performance_stats' reflects new behaviour.
'chzdev --export' does not list performance_stats on new kernels.
'chzdev performance_stats=1' resets statistics on new kernels.
'chzdev performance_stats=0' still resets statistics on old kernels,
does nothing on new kernels.
Suggested-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
With many CPUs, such as triple digit counts, the by default many empty
sysfs directories are prohibitive to collect, especially if the number
of SCSI disk devices is also large, such as 4-digit counts.
Excluding them from being collected from sysfs saves hundreds times
thousands of archive entries and inodes on expansion.
Since the number device-mapper devices (multipath and other target types
such as LVM) is smaller and can include devices not backed by zfcp, keep
collecting
/sys/devices/virtual/block/dm-[0-9]*/mq/0/cpu[0-9]*/
Definitely keep collecting
/sys/kernel/debug/block/{sd,dm-}*/hctx0/cpu[0-9]*/
as it contains actual statistics files:
completed default_rq_list dispatched merged poll_rq_list read_rq_list
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Replace static_assert() with STATIC_ASSERT macro from zt_common.h in order
to get rid of glibc dependencies in zipl/boot and comply with older
C standards.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Suggested-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Set the maximum line length for branch description messages (`git branch
--edit-description`) to 72 characters.
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Update zgetdump man page with the information of compressed DASD dumps
support as well as new verbose 'zgetdump -i' output entries.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Move DF_S390_DUMPER_SIZE_* constants from zdump/df_s390.h to
boot/loaders_layout.h since ccw dumper size depends on the zipl boot
loader layout (to keep it all in one place).
Rename DF_S390_DUMPER_SIZE_* constants to STAGE2_DUMPER_SIZE_*
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Update verbose 'zgetdump -i' output with zlib info (internal zlib version
and zlib compression unit size).
The following new entriees are to be dispalyed:
Zlib version.......: 1
Zlib compression unit: 1 MB
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Increase the auxiliary buffer size from 8 pages to 1 megabyte in order to
significantly increase compressed dump processing speed.
For uncompressed dumps, the effect is minor.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Update dfi_s390.c to support reading of compressed dump segments.
For this, introduce a callback function for reading memory chunks
associated with compressed dump segments. Apart from the segment location
on disk this function requires the entry_offset array from the dump segment
header in order to process each compressed entry separately, thus allowing
fast seek processing for zgetdump (no need to decompress a big dump segment
to extract a single piece of data).
In addition, split mem_chunks_add_ext() in several functions.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Since we are using the existing s390 extended dump format for compressed
dumps as well, set the version of the s390_ext dumper with compression
support and also dump header of the compressed dump to '2' (in order for
zgetdump to distinguish).
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Acked-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
- Adjust progress_print() calls to pass updated address after the set of
blocks has been written to disk.
- Currently total_dump_size value is updated only after the entire dump
segment is written to disk what leads to ambiguos Dump file size values
displayed by progress_print(). Change write_addr_range() to re-calculate
total_dump_size after each set of blocks has been written to disk thus
printing the correct value at the end of each log entry.
- Avoid final log entry duplication.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Acked-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
With current implementation, printing progress while writing a compressed
data chunk might be very inaccurate. Thus, for compressed dump segments
skip progress_print() in write_addr_range() and call it after each
compressed memory chunk is written to disk. For that change
write_addr_range() to call progress_print() conditionally based on the new
print_progress parameter.
For non-compressed dump segments, call progress_print() from
write_addr_range() just as before.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Acked-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add --no-compress option to explicitly omit compression for single-volume
DASD dumper. Used primarily for test purposes.
Since only the lowest byte of mvdump_force field (struct
stage2dump_parm_tail) has been used, split it in two byte fields and use
one for the new no_compress attribute.
Update zipl help and zipl man page with the new parameter info.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Move struct stage2dump_parm_tail from stage2dump.h in to
include/dump/s390_dump.h
Pass the entire stage2dump_parm_tail structure to install_dump_* functions
instead of individual parameters.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Use a separate linker script eckd2dump_sv.lds for single volume dumper with
compression support.
The new dump tool with zlib compression support now has a size of 8 pages.
Since DASD stand alone dump requires a block size of 4K, we are not
affected by the stage 2 size limitations and can load the dumper to
stage 2 as before. We just need to move the HEAP section for ECKD dumper
in the layout definitions up to 0xb000 address. Also expand the stack by
unused 0x400 bytes.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Integrate zlib DFLTCC deflate compression to single volume dasd dumper
using the existing s390 extended dump format. Compression takes place
only if DFLTCC facility is available, otherwise dump is written
uncompressed as before.
First megabyte of memory is always written uncompressed and afterwards
this area is used for zlib workspace and for the compression output buffer.
The compression takes place in chunks of data of equal size (currently 1MB)
and the offset of each compressed chunk is stored in the dump segment
header. Since existing dump segment headers of 1 page size are used, we
need to limit the maximum size of compressed dump segments.
Chunk is written uncompressed in case of compression error or if
deflate compression only makes it bigger.
Thus every chunk of data is compressed separately and can be decompressed
independently. The main reason for that is to enable zgetdump to make fast
read seeks. Otherwise, zgetdump would need to decompress a big dump segment
in the worst case to extract a single piece of data.
Put compression related functions and structures to eckd2dump_zlib.c
and eckd2dump_zlib.h
Update zipl man page with the general information of zlib compression
support.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Move code from write_dump_segment() to write_addr_range() function to use
it later for writing compressed dump segments as well.
Verify that passed address range is a multiple of dasd block size.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Instead of using its own DF_S390_ constants and df_s390_ structs
in df_s390.h, include those from "dump/s390_dump.h" in order to minimize
duplicates. Adjust the code, where required, to use <stdint> types
instead of those defined in zt_common.h (e.g. use uint64_t instead of u64).
Adjust zdump include statements.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Move common dump related structures and constants to the global header
"dump/s390_dump.h" in order to get rid of many duplicates in zgetdump code.
Adjust zipl include statements and update Copyright statements.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Mainly zlib code remains unchanged for the sake of further maintenance.
Only minor adjustments of zlib deflate parts for build purposes:
- Make is_dfltcc_enabled() always return true
- Define CONFIG_ZLIB_DFLTCC in zlib.h to build zlib code with DFLTCC support
- Remove inflate related prototypes from zlib.h
- Adjust oesc_msg() to use snprintf from libc.h
- Remove BUG_ON from zlib_deflate_workspacesize()
- Replace bitrev32() with bi_reverse() from defutil.h
- Include <assert.h> to dfltcc.h header because of static_assert() calls
- Fix other include statements
- Adjust the text in zipl.h following Zlib License requirements
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add required zlib_deflate parts based on kernel zlib code in preparation
to DASD dumper DFLTCC deflate exploitation. Omit inflate modules in
order to minimize the dumper size (no decompression is required for the
dumping).
Adjust include statements leaving other code as is.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The AP queue states within a SE guest may have a so called asynchronous
error pending. When that's the case, the sysfs read of some AP queue
attributes fails with EIO. lszcrypt was not really prepared for this
and instead showed some incorrect output.
This patch fixes this oddity and now lszcrypt -c shows "error" in case
of ap_bound or ap_associate read errors and lszcrypt -V shows also
"error" if the BS bits could not get fetched.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
`pkg-config` is mandatory for compiling s390-tools anyway therefore
let's replace `curl-config` and `xml2-config` calls whenever possible.
In addition, `pkg-config` has the advantage that cross-compilation is
supported. While at it, use `pkg-config` for libcrypto, json-c, and
libssl as well.
Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
