Provide helper functions disk_write_block_buffer_align()
and add_component_buffer_align() to align offset of the record
on specified block size boundary and to save the offset, where
the record was made at.
This will be used by a later patch.
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Eduard Shishkin <edward6@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
. expand interface of disk_get_blocklist_from_file() to get
block pointers for a specific range of data within a file.
. provide a helper function add_component_file_range() to add a
specific range of data within a file as a boot component.
This will be used by a later patch.
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Eduard Shishkin <edward6@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This fixes the following Valgrind finding:
==28040== Syscall param rt_sigaction(act->sa_flags) points to uninitialised byte(s)
==28040== at 0x48C98B0: __libc_sigaction (sigaction.c:58)
==28040== by 0x10D507: sig_handler_init (zgetdump.c:58)
==28040== by 0x10D507: main (zgetdump.c:179)
==28040== Address 0x1ffefffc84 is on thread 1's stack
==28040== in frame #0, created by __libc_sigaction (sigaction.c:43)
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Fix the following incorrect help text line:
-T, --file-timeout (null) Stop reading file after SEC seconds
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Sanity check ELF notes descriptor size before reading it. This prevents
stack buffer overflows in case a dump contains invalid ELF notes.
Instead of reading a note's descriptor into a temporary buffer on stack,
read it directly into the buffer given to nt_read() but also provide
a maximum length of the given buffer to nt_read() in order to prevent
overflows.
This problem was found with valgrind and AFL fuzzing + ASAN.
AFL + ASAN findings:
[root@t83lp49 s390-tools]# ./zdump/zgetdump -iVVVVV ~/zgetdump-fuzzing/findings/crashes/id\:000008\,sig\:06\,src\:000007\,op\:arith8\,pos\:67\,val\:+3
TRACE: DFI initialization
DEBUG: DFI trying s390tape
DEBUG: DFI s390tape returned with rc -19
DEBUG: DFI trying devmem
DEBUG: DFI devmem returned with rc -19
DEBUG: DFI trying s390mv_ext
DEBUG: DFI s390mv_ext returned with rc -19
DEBUG: DFI trying s390mv
DEBUG: DFI s390mv returned with rc -19
DEBUG: DFI trying s390_ext
DEBUG: DFI S390 extended initialization
DEBUG: DFI s390_ext returned with rc -19
DEBUG: DFI trying s390
DEBUG: DFI S390 initialization
DEBUG: DFI s390 returned with rc -19
DEBUG: DFI trying lkcd
DEBUG: DFI lkcd returned with rc -19
DEBUG: DFI trying elf
DEBUG: DFI ELF initialization
DEBUG: DFI ELF e_phnum 11
DEBUG: DFI ELF p_type[0] 0x4
DEBUG: DFI ELF n_type 0x0
AddressSanitizer:DEADLYSIGNAL
=================================================================
==208548==ERROR: AddressSanitizer: stack-overflow on address 0x03ffef05d000 (pc 0x0000010051b0 bp 0x03fff107dc40 sp 0x03ffef05dac8 T0)
#0 0x10051b0 (/root/s390-tools/zdump/zgetdump+0x10051b0)
SUMMARY: AddressSanitizer: stack-overflow (/root/s390-tools/zdump/zgetdump+0x10051b0)
==208548==ABORTING
valgrind findings:
==56423== Source and destination overlap in memcpy(0x4a86d38, 0x4a875e0, 4096)
==56423== at 0x4839F86: memcpy (in /usr/lib/s390x-linux-gnu/valgrind/vgpreload_memcheck-s390x-linux.so)
==56423== by 0x114253: memcpy (string_fortified.h:34)
==56423== by 0x114253: nt_read (dfi_elf.c:95)
==56423== by 0x1145FF: nt_s390_prefix_read (dfi_elf.c:195)
==56423== by 0x1145FF: pt_notes_add (dfi_elf.c:259)
==56423== by 0x1145FF: dfi_elf_init (dfi_elf.c:326)
==56423== by 0x112A57: dfi_init (dfi.c:1212)
==56423== by 0x10D663: do_dump_info (zgetdump.c:127)
==56423== by 0x10D663: main (zgetdump.c:182)
==56423==
==56423== Invalid write of size 8
==56423== at 0x4839E28: memcpy (in /usr/lib/s390x-linux-gnu/valgrind/vgpreload_memcheck-s390x-linux.so)
==56423== by 0x114253: memcpy (string_fortified.h:34)
==56423== by 0x114253: nt_read (dfi_elf.c:95)
==56423== by 0x1145FF: nt_s390_prefix_read (dfi_elf.c:195)
==56423== by 0x1145FF: pt_notes_add (dfi_elf.c:259)
==56423== by 0x1145FF: dfi_elf_init (dfi_elf.c:326)
==56423== by 0x112A57: dfi_init (dfi.c:1212)
==56423== by 0x10D663: do_dump_info (zgetdump.c:127)
==56423== by 0x10D663: main (zgetdump.c:182)
==56423== Address 0x4a86ee0 is 0 bytes after a block of size 912 alloc'd
==56423== at 0x483675E: calloc (in /usr/lib/s390x-linux-gnu/valgrind/vgpreload_memcheck-s390x-linux.so)
==56423== by 0x10E71D: zg_alloc (zg.c:93)
==56423== by 0x114793: nt_prstatus_read (dfi_elf.c:123)
==56423== by 0x114793: pt_notes_add (dfi_elf.c:234)
==56423== by 0x114793: dfi_elf_init (dfi_elf.c:326)
==56423== by 0x112A57: dfi_init (dfi.c:1212)
==56423== by 0x10D663: do_dump_info (zgetdump.c:127)
==56423== by 0x10D663: main (zgetdump.c:182)
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Suggested-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reported-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Had a confusing decoded trace record:
Timestamp : ...
Area : SCSI
...
Tag : rsl_err
...
SCSI result : 0x00000002
SCSI opcode : 1a...
FCP rsp inf cod: 0x00
FCP rsp IU : 00000000 00000000 00000a02 000000ff
00000012 00000000
^^
and was wondering where that sense data would be or if the
corresponding PAY record "fcp_riu" was lost due to trace area wrapping.
So the fix here adds the following two lines to the same trace record:
FCP rsp IU len : 42
FCP rsp IU all : record not available anymore.
Similarly, the following LUN reset Task Management Function response
was missing the last two lines regarding the full FCP response IU
and its optional part with the FCP response info:
Timestamp : ...
Area : SCSI
...
Tag : lr_okay
...
FCP rsp inf cod: 0x00
FCP rsp IU : 00000000 00000000 00000100 00000000
00000000 00000008
^^
FCP rsp IU len : 32
FCP rsp IU all : record not available anymore.
As of today, depending on the kernel version we have
either fcp_sns or fcp_riu PAY trace records. See Linux kernel v4.14 commit
12c3e5754c80 ("scsi: zfcp: fix payload with full FCP_RSP IU in SCSI trace
records").
Always print non-zero payload length independent of payload type.
Actually this also fixes a regression for wrapped away fcp_sns.
If there is no fcp_sns it either wrapped away or it's a kernel with fcp_riu.
Only print fcp_riu if it contains more content than the preceding
unconditional fixed-size field "FCP rsp IU".
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Fedor Loshakov <loshakov@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
If the while loop in mem_chunks_add_ext() is never executed, then
the stack variable containing the dump segment header will never be
initialized.
clang's static code analyzer reports the following problem:
$ make CC="clang --analyze" -C zdump
dfi_s390.c:157:6: warning: Branch condition evaluates to a garbage value [core.uninitialized.Branch]
if (!dump_segm.stop_marker)
^~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Use util_log from libutil to output various log messages that can be helpful
during problem analysis.
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Replace the incorrect %d format specifier with %u one for unsigned integer
types.
This issue was found with AFL fuzzing.
$ ./zdump/zgetdump -i ~/input.bin
General dump info:
Dump format........: s390
Version............: -2147483647
System arch........: s390x (64 bit)
CPU count (online).: 32768
Dump memory range..: 1 MB
Memory map:
0000000000000000 - 00000000000f423f (1 MB)
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
We found situations, where the debug commands from dbginfo.sh
did overwrite some debug files (e.g. OSA s390dbf) - so we change
the collection order
Signed-off-by: Joern Siglen <siglen@de.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Before reading data in dfi_vmcoreinfo_init(), check the validity
of the memory range. Otherwise this can result in a segmentation fault when
zgetdump is given a very small dump, e.g. S390 DASD single-volume dump of
size 0x10 bytes.
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Before reading data in os_info_get(), check the validity of the memory
range. Otherwise this can result in a segmentation fault when zgetdump is
given a very small dump, e.g. S390 DASD single-volume dump of size 0x10
bytes.
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Before reading data at addresses 0x10418 and 0x10420 in kdump_init(),
validate the validity of the memory range. Otherwise this can result in
a segmentation fault when zgetdump is given a very small dump, e.g.
S390 DASD single-volume dump of size 0x1000 bytes.
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The dfi_vmcoreinfo_init() function might be called on a dump of a non-ELF
format because the DFI goes through all supported dump formats when first
trying to identify of what dump format the given input is. Therefore,
we must be very careful in interpreting read data and ensure that it
makes sense before accessing or using it.
This commit prevents a potential overflow of a stack buffer in
dfi_vmcoreinfo_init() if note.n_namesz is bigger than the stack buffer.
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
- adding new print function for simpler output customizing
- consolidate some output files
- sync structures and use of checks
- some formatting updates
Signed-off-by: Joern Siglen <siglen@de.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The function mem_chunks_add_ext() allocates but does not release memory
if it encounters unexpected errors during dump segment reading.
Allocate memory passed to dfi_mem_chunk_add() right before calling
the function. This way there is no need for a cleanup anymore.
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
- clenaup outdated kernel - we no longer have 2.x kenrel in support
- add timeout on command excution - ensure to not miss all data for a
single command to hang
Signed-off-by: Joern Siglen <siglen@de.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
When integrity support is enabled for a LUKS2 volume, then the LUKS2
volume key may include the integrity key concatenated to the secure key
(dependent on the integrity type).
Get the integrity key size from the LUKS2 header (if integrity support
is enabled) and calculate the size of the secure key when performing
operations with the secure key only.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
According to the ELF specification, the file size of a PT_LOAD
memory segment might be less than its memory size. In that case,
the remaining bytes must be filled with zeros. The ELF DFI implementation
didn't handle this case correctly. Such ELF core files might be produced
by the makedumpfile tool.
From elf.5 man page:
------------------------------------------------------
PT_LOAD
The array element specifies a loadable segment,
described by p_filesz and p_memsz. The bytes
from the file are mapped to the beginning of the
memory segment. If the segment's memory size
p_memsz is larger than the file size p_filesz,
the "extra" bytes are defined to hold the value
0 and to follow the segment's initialized area.
The file size may not be larger than the memory
size. Loadable segment entries in the program
header table appear in ascending order, sorted
on the p_vaddr member.
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Before attempting to read ELF program headers, the file must be positioned
at the offset of the first program header as specified in the ELF header.
Furthermore, read all ELF program headers with one call to zg_read(). This
has the advantage of not having to restore the file offset every time
after it is changed in pt_notes_add() and other functions which need to
read the same file as well.
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This is a false positive because IBM Z architecture supports unaligned
memory accesses.
dfo_s390.c: In function ‘df_s390_dump_init’:
dfo_s390.c:218:29: warning: taking address of packed member of ‘struct df_s390_hdr’ may result in an unaligned pointer value [-Waddress-of-packed-member]
218 | timeval2tod(&dh->tod, dfi_attr_time());
| ^~~~~~~~
dfo_s390.c:219:29: warning: taking address of packed member of ‘struct df_s390_em’ may result in an unaligned pointer value [-Waddress-of-packed-member]
219 | timeval2tod(&em->tod, dfi_attr_time());
| ^~~~~~~~
dfo_s390.c:222:29: warning: taking address of packed member of ‘struct df_s390_em’ may result in an unaligned pointer value [-Waddress-of-packed-member]
222 | timeval2tod(&em->tod, dfi_attr_time_end());
| ^~~~~~~~
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
When creating a bootmap, look for zipl components (stage3.bin and
zipl helpers) in a directory specified by S390TOOLS_LIBDIR shell
environment variable. If that variable is not set, then look for
them at the default location.
In verbose mode print the name of s390-tools library directory,
where the search was implemented.
Signed-off-by: Eduard Shishkin <edward6@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add generic functions
util_sysdir();
util_sysdir_path()
and their special cases supplied for users:
util_libdir();
util_libdir_path();
util_datadir();
util_datadir_path()
The function util_sysdir() determines the absolute name of a
s390-tools system directory. It could be data, or library directory.
The function util_sysdir_path() determines the absolute name of a
file installed in the s390-tools system directory.
The function util_libdir() determines the absolute name of a
s390-tools library directory. By default that name is defined
by the compile-time macro TOOLS_LIBDIR (/lib/s390-tools).
Users can specify an override by setting environment variable
S390TOOLS_LIBDIR.
The function util_libdir_path() determines the absolute name of a
file installed in the s390-tools library directory.
The function util_datadir() determines the absolute name of a
s390-tools system data directory. By default the name is defined
by the compile-time macro TOOLS_DATADIR (/usr/share/s390-tools/).
Users can specify an override by setting environment variable
S390TOOLS_DATADIR.
The function util_datadir_path() determines the absolute name of a
file installed in the s390-tools data directory.
The ability to override the setting for TOOLS_LIBDIR and
TOOLS_DATADIR is required for implementing tests on tools that are
not installed in their default system path locations.
Signed-off-by: Eduard Shishkin <edward6@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
lscss shows device number as 'None' if the corresponding device in the
subchannel is non-operational or not connected. Instead, show the
device-no derived from the new dev_busid attribute which provides the
value of device_id irrespective of the device availability.
i.e the current lscss shows
Device Subchan. DevType CU Type Use PIM PAM POM CHPIDs
----------------------------------------------------------------------
0.0.0000 0.0.0000 3390/0c 3990/e9 f0 a0 ff 32333435 00000000
none 0.0.00c7 f0 a0 5f 32333435 00000000
none 0.0.00c8 f0 a0 5f 32333435 00000000
here the subchannels 0.0.00c7 and 0.0.00c8 do not have an operational
device on them. Hence the device is shown as none.
With this patch,
Device Subchan. DevType CU Type Use PIM PAM POM CHPIDs
----------------------------------------------------------------------
0.0.0000 0.0.0000 3390/0c 3990/e9 f0 a0 ff 32333435 00000000
0.0.74c8 0.0.00c7 f0 a0 5f 32333435 00000000
0.0.74c9 0.0.00c8 f0 a0 5f 32333435 00000000
The device-no is shown as 0.0.74c8; Where the DevType field still
indicates that the device is not present.
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
lszcrypt now evaluates and displays the 'status' in the
'STATUS' column if the vfio provides this sysfs attribute.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The 'STATUS' field was within the code used as 'online'
record because it showed the online state. But now it
displays some more info like 'deconfig' and maybe even
more in the future. So now the code also uses a 'status'
record for this info.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Slight rework of the lszcrypt code with:
- a queue or card in deconfigured mode is displayed
as 'deconfig' regardless which driver is bound to
the device.
- a queue or card in 'deconfig' mode does not show
any counters any more but displays a '-' instead.
- a queue not bound or bound to something else as
the 'default' zcrypt dd does not show any counters
but displays a '-' instead.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The command
# vmur punch -r rhcos-live-kernel-s390x -u etpgxku -N kernel.img
Reader file with spoolid E YO created and transferred to ETPGXKU.
#
did not indicate an error when executed. However the file was not
transferred and this error message went unnoticed:
RPIMGR032E YOU ARE NOT AUTHORIZED TO CLOSE TO TATAC05.ETPGXKU
HCPCSL007E Invalid userid - ETPGXKU
Fix this by checking the CP return code and print the error message
returned by CP. This is the behavior now:
# vmur punch -r rhcos-live-kernel-s390x -u etpgxku -N kernel.img
vmur: CP command failed with rc=7
RPIMGR032E YOU ARE NOT AUTHORIZED TO CLOSE TO TATAC05.ETPGXKU
HCPCSL007E Invalid userid - ETPGXKU
#
Fixes: https://github.com/ibm-s390-linux/s390-tools/issues/119
Reported-by: Vance Morris <vmorris@us.ibm.com>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Tested-by: Vance Morris <vmorris@us.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Complements v2.9.0 commit 4036e80b26 ("lszfcp: add new output marker
for non-good FCP devices (hosts)").
Otherwise "linkdown" shows as "failed" because linkdown happens to be
the one special case that also sets the failed status flag of the
FCP device (host). Linkdown is kind of benign compared to other cases
where the FCP device is in failed status.
Examples:
$ lszfcp -He
0.0.194a host3 linkdown
$ lszfcp -HeV
/sys/devices/css0/0.0.0004/0.0.194a linkdown
/sys/class/fc_host/host3
/sys/class/scsi_host/host3
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Reviewed-by: Fedor Loshakov <loshakov@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The DFI memory chunk manager cannot handle PT_LOAD segments of size 0.
This can lead to a NULL pointer access in mem_chunk_find() in case
zgetdump is given an invalid VMCORE ELF file as input which contains
only zero-sized ELF PT_LOAD segments. Instead of crashing, show an error
message and terminate gracefully.
The TELA test dump_with_zero_sized_segments.sh can reproduce this bug.
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Zipl.conf is collected via /etc/*.conf in CONFIGFILES but BLS snippets
do not appear in /etc/zipl.conf.
Complements v2.5.0 commit d280e5b1fa ("zipl: Add BootLoaderSpec support")
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Some libraries depend on other libraries, so split the libraries
into two groups: base libraries that do not depend on any others, and
the remaining libraries, that may depend on the base libraries.
Ensure that the base libraries are built first, before starting to
build the remaining libraries. The tools are only built once the base
libraries and the remaining libraries have been built.
This fixes a possible build problem with libseckey when parallel build
is used. The libseckey library is used by libekmfweb and the zkey KMIP
plugin (zkey-kmip). With parallel build both are built in parallel,
and thus both trigger the build of libseckey. This can lead to the
situation that libseckey is built twice at the same time, which can lead
to build failures (corrupted archive, etc).
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
overlay.o was being recompiled during the install step because
it depended on the target check-dep-fuse which is phony and,
therefore, always outdated. The solution is to create an empty file
for the target check-dep-fuse after its successful completion. This
prevents make from rebuilding overlay.o during installation.
Closes: https://github.com/ibm-s390-linux/s390-tools/pull/118
Fixes: 5a7d2a58c8 ("hsavmcore: Fix fuse dependency checking")
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Suggested-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Use LONG_BIT provided by C standard in <limits.h>.
Fixes the following compile errors with buildroot:
lshwc.c: In function ‘parse_cpulist’:
lshwc.c:295:15: error: ‘__BITS_PER_LONG’ undeclared (first use in this function)
295 | no_a = i % __BITS_PER_LONG;
| ^~~~~~~~~~~~~~~
Fixes: 27a562da0a ("cpumf/lshwc: Program to extract complete counter sets")
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Use standard 32- and 64-bit C types.
Fixes the following compile errors with buildroot:
In file included from lshwc.c:41:
lshwc.h:61:2: error: unknown type name ‘__u64’
61 | __u64 version; /* Version of interface */
| ^~~~~
lshwc.h:62:2: error: unknown type name ‘__u64’
62 | __u64 data_bytes; /* # of bytes required */
| ^~~~~
lshwc.h:63:2: error: unknown type name ‘__u64’
63 | __u64 cpumask_len; /* Length of CPU mask in bytes */
| ^~~~~
lshwc.h:64:2: error: unknown type name ‘__u64’
64 | __u64 *cpumask; /* Pointer to CPU mask */
| ^~~~~
lshwc.h:65:2: error: unknown type name ‘__u64’
65 | __u64 counter_sets; /* Bit mask of counter set to get */
| ^~~~~
lshwc.h:69:2: error: unknown type name ‘__u32’
69 | __u32 set; /* Counter set number */
| ^~~~~
Fixes: 27a562da0a ("cpumf/lshwc: Program to extract complete counter sets")
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
KMIP values of type BYTE-STRING are represented as hex values when XML
or JSON encoding is used. Do not drop any leading zero bytes, if the
value has them.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
util_path_sysfs() allocates memory for the created path which must be
freed by the user.
Fixes: 8023a72b11 ("libdasd: Provide function to read ese sysfs attribute")
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
