Add required zlib_deflate parts based on kernel zlib code in preparation
to DASD dumper DFLTCC deflate exploitation. Omit inflate modules in
order to minimize the dumper size (no decompression is required for the
dumping).
Adjust include statements leaving other code as is.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The AP queue states within a SE guest may have a so called asynchronous
error pending. When that's the case, the sysfs read of some AP queue
attributes fails with EIO. lszcrypt was not really prepared for this
and instead showed some incorrect output.
This patch fixes this oddity and now lszcrypt -c shows "error" in case
of ap_bound or ap_associate read errors and lszcrypt -V shows also
"error" if the BS bits could not get fetched.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
`pkg-config` is mandatory for compiling s390-tools anyway therefore
let's replace `curl-config` and `xml2-config` calls whenever possible.
In addition, `pkg-config` has the advantage that cross-compilation is
supported. While at it, use `pkg-config` for libcrypto, json-c, and
libssl as well.
Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The pkey kernel module supports two key blob formats for EP11 AES keys.
The first one (PKEY_TYPE_EP11) contains a 16 bytes header that overlays
the first 32 bytes of the key blob which usually contain the ID of the
EP11 session to which the key is bound. For zkey/dm-crypt that session
ID used to be all zeros. The second blob format (PKEY_TYPE_EP11_AES)
prepends the 16 bytes header to the blob, an thus does not overlay the
blob. This format can be used for key blobs that are session-bound, i.e.
have a non-zero session ID in the first 32 bytes.
Change zkey to generate EP11 keys using the new format (i.e. pkey type
PKEY_TYPE_EP11_AES), but existing key blobs using the old format can
still be used.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Joerg Schmidbauer <jschmidb@de.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Add lspai program and man page to display Processor Activity
Information (PAI) facility counter sets in the same way as
lscpumf for the CPU Measurement Facility counter sets.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
When calculating smt utiliziation field, subresults are capped to a
minimum value of zero to prevent wrap around while converting values
from signed to unsigned integers. The capping of subresults cause slight
inaccuracies therefore capping has been moved from intermediate steps
and done at the end.
Fixes: 0209c11bc1 ("hyptop: Add real SMT utilization field")
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
This complements v2.27.0 commit 73c46a3056 ("zdev/dracut: fix kdump by
only activating required devices"). On older distributions, the absence of
zdev_id can cause the following harmless error messages for each udev
event:
(spawn)[387]: failed to execute '/lib/s390-tools/zdev_id' \
'/lib/s390-tools/zdev_id': No such file or directory
Kdump is still functional nonetheless.
As of v2.24.0 commit 2e89722ef0 ("zdev: make site specific udev-rule for
ccw"), the invocations of chzdev within
zdev/dracut/95zdev-kdump/module-setup.sh generate
/etc/udev/rules.d/40-zdev-id.rules. And so even though zdev-kdump
intentionally does not install zdev_id and its previous singular user
zdev/udev/81-dpm.rules into the kdump initrd, because DPM device auto
configuration is not desired in the kdump environment, zdev_id meanwhile
has an additional functionality for site-support and the generated
40-zdev-id.rules calls /lib/s390-tools/zdev_id. By installing zdev_id into
the kdump initrd, 40-zdev-id.rules can work without error.
Fixes: 73c46a3056 ("zdev/dracut: fix kdump by only activating required devices")
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Other tools may need to process the configuration-unique id. Provide a
machine readable format by writing to a YAML file containing a `cuid`
entry and optionally an `add` entry. New CLI options `--format` and
`--output` are introduced for this. Currently, only the output format
`yaml` is supported.
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Refactor the code responsible for printing the verification result into
a new function named `fprint_verify_result`. This function will be
reused in the future and a new output format will be added. While at it,
increase the dump data width for the addition data. In addition, add a
prefix `0x` to the values in order to indicate that these are
hexadecimal values.
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add `beautify` parameter to `pvattest_hexdump`. If the parameter is set
to true, a offset and whitespaces will be added for better readability.
With beautify set to FALSE:
14141414141414141414141414141414
With beautify set to TRUE:
0x0000 1414 1414 1414 1414 1414 1414 1414 1414
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The only user of `pvattest_hexdump` uses GBytes anyway, therefore let's
use GBytes as parameter type for `pvattest_hexdump`.
While at it, change the order of the parameters, constify `@width` and
handle the `@width == 0` case, which results in an hex-string without
any line breaks.
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This fixes the following error (using GNU Make 4.3.0):
make[2]: command: Command not found
The reason for this is that `command` is a bash builtin. `command` is
used in `common.mak` for the `combdb` Makefile target.
While at it, remove the now useless `SHELL := /bin/bash` definitions in
the sub-Makefiles.
Fixes: 3d098416c6 ("common.mak: add `compdb` Makefile target")
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Replace local ifs_orig variables in different functions by a single
global IFS_ORI variable. This will reduce the risk of missing a local
saving and restore of the original IFS.
Reviewed-by: Michael Storzer <MSTORZER@de.ibm.com>
Signed-off-by: Joern Siglen <siglen@de.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add a README.md to the rust subdirectory as a guideline for writing
s390-tools tools in Rust. This includes build integration, dependency
handling, and a few coding style hints. Rust related information
is also added to the main README.md.
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
[hoeppner@linux.ibm.com: Adapt details in README.md]
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add `pvsecret` a tool to create, add, list, and delete Ultravisor
secrets. `pvsecret` uses the functionality from the pv-crate
to provide an command line tool to manage the secrets.
Add a new target group PV_TARGETS in rust/Makefile that additionally
requires openssl and libcurl as pv with the feature "request" uses
openssl and libcurl fearures.
Acked-by: Jan Höppner <hoeppner@linux.ibm.com>
Acked-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
[hoeppner@linux.ibm.com: Adapt man pages and help output]
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add a `pv` crate that bundles useful functions and structs for creating
requests like `Attestation`, `Add Secret`, or even `Boot` a.k.a.
Secure Execution Image.
Note pv includes a subcrate `openssl_extensions` that (temporarily)
bundles some needed `openssl-rust` functionalities that are not
upstream yet. The plan is to remove these, when they become
upstream.
The pv crate has multiple features:
* request - code to generate requests
* uvsecret - code to access the UV-secret api
with request enabled also generating requests is
possible
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Acked-by: Jan Höppner <hoeppner@linux.ibm.com>
Acked-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The rust integration into the s390-tools build system consists of the
following steps:
- Add a subdirectory for the rust code.
- Add a Makefile that forwards rust builds to `cargo`.
- Add a `utils` crate for rust code in s390-tools.
- Add rust stuff for dotfiles:
- gitignore
- editorconfig
- codespellrc (while at it, add an ignore file)
With cargo the rust ecosystem has its own build system which also is
responsible to resolve rust dependencies via downloading the dependencies
from (default) crates.io and discover the source files. Therefore, the
Makefile just calls `cargo build` to forward the build to cargo.
If a rust crate does not require external dependencies, users might call
rustc directly.
A simple `make` will build all the rust targets as well (with --release
specified). Also `make install` will work as usual.
A few Makefile configuration variables are introduced for rust/Cargo:
- HAVE_CARGO (default 1) to toggle the build of rust code using cargo
- CARGOFLAGS to add custom cargo flags, e.g. --offline
- CARGO Cargo binary location defaults to
$(where cargo)
A new global make target is defined to get the current s390-tools
version:
$ make version
2.28.0
rust/Makefile also has the `print-rust-targets` target to print all rust
directories/crates that should be shipped/installed.
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Acked-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Command vmur issues a warning and aborts receiving a file from
the reader when either option -t or option -b is specified.
Example:
./vmur re -t 0x25,0x40 22 -H /tmp/xxx.txt
vmur: Conflicting options: -b and -t are mutually exclusive.
This is wrong as there is only one option specified.
The command should be aborted only when both flags are specified.
Fix this wrong behavior.
Fixes: d5f853c460 ("vmur: Remove option -c for dump file conversion")
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reported-by: Benjamin Block <bblock@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
IBM Secure Execution guests may want to share additional secrets with
the Ultravisor in a secure manner. For this the concept of secret
requests and three new Ultravisor-calls were introduced.
Add support to genprotimg to prepare an Secure Execution image with the
requirement that add-secret requests must provide an extension secret
that matches the customer communication key (CCK) derived extension
secret.
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
In preparation for the next patch, add the parameter `NAME` to the
`MUT_EXCL_BOOL_FLAG` macro. This is useful for the case when the command
line flag has a different naming than the struct field.
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Refactor arguments related to the SE header control flags into own
struct with the name `PvControlFlagsArgs`. This change makes it easier
to extend the control flags arguments further, without touching the
signature of `pv_img_set_control_flags`. While at it, rename the struct
members `allow_...` to `enable_...`. This matches with the command line
option names.
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Introduce a function for setting the control flags. This makes it easier
to add more control flags in the future.
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Simplify the clean target since there are several redundant
things (*.bin) and files that aren't built at all (.xxx and .yyy).
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Only the bootloaders cannot be built as PIE and for that there are
already the -no-pie linker and compiler flags set by the boot/Makefile.
In addition, remove the `noexecstack` linker flag as it has no use
anymore (see commit 518bf7d7357 ("zipl/boot: use
`--no-warn-rwx-segments` linker flag")). It was originally introduced to
declare the ELF segment of the bootloader stack as non-executable. But
this ELF attribute had no effect for multiple reasons:
1. ALL_LDFLAGS is not used for the bootloaders
2. no ELF loader is used for the bootloaders that would take this ELF
attribute into account
This fixes the problem of overriding `-fPIE` set by the distributor.
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Set the maximum line length for commit messages to 72 characters, and
the indentation style for Makefiles to TAB.
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Currently, the debug information of the bootloader is discarded during
the raw binary creation. Change this by creating separate
<loader>.bin.debug files containing the debug information. The packager
will then be able to package these files as desired and the developer
can use them to debug the code.
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
When creating a tar archive, dump2tar incorrectly truncates the last
character of file paths that are exactly 100 characters long.
Paths up to 100 characters can be represented in the 100-byte name field
of a tar header entry, while longer paths are handled via an additional
tar data block. For 100-character paths, dump2tar determines that a
single header is sufficient, but then uses util_strlcpy() to store the
path into the name field. Since util_strlcpy() ensures nul-terminated
strings, the final character of the path is overwritten.
Fix this by using strncpy() instead of util_strlcpy(). Also mark the
affected name fields as "nonstring" to prevent associated compiler
warnings.
Reported-by: Steffen Maier <maier@linux.ibm.com>
Fixes: d85cf20981 ("dump2tar: Change SET_STR_FIELD to copy strings correctly")
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Commit 62ec87680a61 ("common.mak: improve cross compilation support")
added one extra whitespace during the changes of the toolchain command
definitions. The rest of the commands did not receive that change.
Since then the pretty print output looks like this:
...
CC zipl/boot/eckd1b.o
CXX ziomon/ziorep_collapser.o
SED zdev/src/lszdev_usage.c
CC hyptop/sd_cpu_items.o
MV zfcpdump/zfcpdump-initrd
LINK dasdfmt/dasdfmt
...
Add the additional whitespace to all other tools definitions used during
the build process.
Note: This doesn't fix the misaligned indentation for commands like
$(CC_FOR_BUILD) as those inherit the whitespace from the original
command, here $(CC).
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Fix the following warnings:
troff: zkey-ekmfweb.1:455: warning: macro 'APP=LINUX'' not defined
troff: zkey-ekmfweb.1:457: warning: macro 'encvol'.' not defined
A single quote (') at the beginning of ta line is interpreted as macro.
Fix this by starting the line with a dummy character (\&).
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
include the version of dbginfo.sh just used for data collection into our
tar file - so we have the used version in case of data collection problems.
Reviewed-by: Michael Storzer <MSTORZER@de.ibm.com>
Signed-off-by: Joern Siglen <siglen@de.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The `install` Makefile target of the top Makefile has `all` and
`install-recursive` as prerequisites. This leads to the two recursive
Makefile calls `make -C <SUBDIR> all` and `make -C <SUBDIR> install`.
The problem is these two targets try to build the same object files and
this leads to a race condition between these two targets in case of a
parallel build.
Fix this problem by removing the `all` prerequisite from the `install`
target, as it is not needed since all the `install` targets in the
sub-Makefiles already have proper prerequisites.
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
- Instead of always clearing the memory on reipl after the ccw dump has
been taken, check for the special OS_INFO_FLAG_REIPL_CLEAR flag in
os_info flags entry (indicates if sysfs 'clear' attribute has been set
on the panicked system) and trigger diag308 with a proper subcode.
- Get rid of superfluous ipib_info structure in stage2dump.c.
- Collect ipl_pbt constants in boot/ipl.h header.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Acked-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
