This also makes sure that we don't try to write to the
/sys/bus/pci/device/<dev>/recover attribute if reset failed.
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
After a zpcitctl --reset the PCI function is currently left in an error
state. This seems unexpected, so follow the SCLP reset with an OS level
recovery using /sys/bus/devices/<dev>/recover.
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Use after free causes the XTS attribute to be displayed wrongly.
Fixes: 298fab68fe ("zkey: Preparations for introducing a new key type")
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Different crypto card types use different ways to re-encipher a secure
key with a new master key. Generalize the handling of re-enciphering,
so that the majority of the code does not have to care about the card
type when dealing with it.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
EP11 secure keys require a certain firmware version. Enhance
the APQN cross check to not only check for a minimum card level,
but also for a minimum firmware version.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add a new source file that contains EP11 specific helper routines.
These routines require to load the EP11 host library.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Different crypto card types use different serial number formats.
Generalize the handling of serial numbers so that the majority of the
code does not have to care about the card type when dealing with it.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Different crypto card types use different master key verification patterns
(MKVPs). Generalize the handling of MKVPs so that the majority of the
code does not have to care about the card type when dealing with MKVPs.
Also generalize messages about the crypto card's master keys to not
mention a specific card type.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
EP11 cards provide the firmware version and API ordinal number as
a sysfs attribute on the crypto card level. Add a helper function
that obtains the firmware version and API ordinal number from there.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
As preparation for adding support for EP11 secure keys,
generalize the code to support different crypto card types.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The zkey list function uses scandir() to look for files in the
zkey key repository directory. It checks the dirent.d_type field
to consider only regular files, but skip all others.
Unfortunately, not all file systems have full support for returning
the file type in d_type. When the zkey repository is located in a file
system that does not support d_type, such as xfs, zkey list shows no
keys, although the key repository contains keys.
Fix this by also considering directory entries with d_type = DT_UNKNOWN.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
zipl creates a temp bootmap file to keep the original file in case of an
error. Delete this temp file in case of an error.
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Philipp Rudo <prudo@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The hierarchy of the secure boot settings in the config file should be:
defaultboot > menu > section
This patch implements this hierarchy and adds a check if a valid option is
specified and prints an error message otherwise.
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Philipp Rudo <prudo@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Allow that --secure or -S is specified on command line without the need to
allow all options on the command line.
Also ensure that the command line option overrules the config option and
correctly ensure that secure boot is only set for SCSI devices.
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Philipp Rudo <prudo@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The zkey convert command must select an CCA adapter out of the
list of associated APQNs (if any) to perform the key conversion.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
As the definition of `stfle_fac_list` in the lowcore uses uint64_t, we
should also use uint64_t for the `stfle_fac_list` parameter of the
`stfle/__stfle_asm` function.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Use '$(MAKE)' to pass down the makefile flags.
This fixes the warning:
make[4]: warning: jobserver unavailable: using -j1. Add '+' to parent make rule.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Philipp Rudo <prudo@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
dasd_is_ro() uses the O_RDWR flag when opening the file descriptor.
However, an attempt to open the file descriptor of a device that is in
read-only state will fail and the BLKROGET ioctl that is used to
actually determine the read-only state can't be issued.
Change the flag to O_RDONLY to fix this.
Fixes: a5c1923d32 ("libdasd: Add common DASD ioctl's to the lib")
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The help output for 'zkey generate' has a typo in the description
of the '-N, --name' option mentioning a non-existing '-M' option.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
An invalid APQN like '01.00xx' is not treated as invalid, but results
in APQN '01.0000'. Fix the checking to treat such invalid APQNs as
invalid.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
In error cases, dasdview returns -1 which results in the return value
255. This is due to the fact that only the low-order 8 bits are used for
the status value. See 2.13 Status Information [1] in the POSIX standard
and the exit() POSIX man page [2] for more details.
Instead of returning -1, use the EXIT_FAILURE constant to indicate
unsuccessful termination properly. This change also makes the exit
status consistent for all error cases in dasdview, as some exit() calls
already use EXIT_FAILURE.
[1]: https://pubs.opengroup.org/onlinepubs/9699919799/functions/V2_chap02.html
[2]: https://pubs.opengroup.org/onlinepubs/9699919799/functions/exit.html
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Increase consistency with the other macros by moving and renaming
the STAGE{2,3} macros in zipl.h.
Signed-off-by: Philipp Rudo <prudo@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Make use of the pre-defined __packed macro throughout zipl. This
requires adding the global include dir to ALL_CFLAGS.
Signed-off-by: Philipp Rudo <prudo@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
