Simplify the clean target since there are several redundant
things (*.bin) and files that aren't built at all (.xxx and .yyy).
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Only the bootloaders cannot be built as PIE and for that there are
already the -no-pie linker and compiler flags set by the boot/Makefile.
In addition, remove the `noexecstack` linker flag as it has no use
anymore (see commit 518bf7d7357 ("zipl/boot: use
`--no-warn-rwx-segments` linker flag")). It was originally introduced to
declare the ELF segment of the bootloader stack as non-executable. But
this ELF attribute had no effect for multiple reasons:
1. ALL_LDFLAGS is not used for the bootloaders
2. no ELF loader is used for the bootloaders that would take this ELF
attribute into account
This fixes the problem of overriding `-fPIE` set by the distributor.
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Currently, the debug information of the bootloader is discarded during
the raw binary creation. Change this by creating separate
<loader>.bin.debug files containing the debug information. The packager
will then be able to package these files as desired and the developer
can use them to debug the code.
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
- Instead of always clearing the memory on reipl after the ccw dump has
been taken, check for the special OS_INFO_FLAG_REIPL_CLEAR flag in
os_info flags entry (indicates if sysfs 'clear' attribute has been set
on the panicked system) and trigger diag308 with a proper subcode.
- Get rid of superfluous ipib_info structure in stage2dump.c.
- Collect ipl_pbt constants in boot/ipl.h header.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Acked-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add DIAG308_LOAD_NORMAL diag308 subcode (used by FCP/NVMe normal ipl).
Rename other diag308_subcode and diag308_rc constants to be in sync with
kernel naming.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
- Move zipl/boot/error.h to include/boot
- Adjust include statements in zipb/boot and genprotimg/boot
- Remove error.h from tunedasd/src/tunedasd.c as not needed
- Fix tunedasd/src/Makefile
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Make 'struct os_info *os_info' a const to ensure/indicate that no changes
are made to the given structure.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
- Move struct os_info from kdump.h to the new header os_info.h.
- Place os_info.h to include/boot in order to use it in zgetdump
code as well.
- Replace hardcoded value of OS_INFO_CSUM_SIZE with a properly
calculated one.
- Rename os_info_check() of kdump.h to kdump_os_info_check().
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The compiler doesn't fully understand the code block that precedes the
usage of title_off in the condition and thus it thinks it could be
uninitialized. Silence the warning with an explicit initialization.
CC zipl/src/scan.o
In function ‘sort_bls_fields’,
inlined from ‘scan_bls’ at scan.c:1502:8:
scan.c:874:12: warning: ‘title_off’ may be used uninitialized [-Wmaybe-uninitialized]
874 | if (title_off == 0)
| ^
scan.c: In function ‘scan_bls’:
scan.c:842:16: note: ‘title_off’ was declared here
842 | size_t title_off;
| ^~~~~~~~~
GitHub-ID: https://github.com/ibm-s390-linux/s390-tools/pull/152
Signed-off-by: Dan Horák <dan@danny.cz>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
`load_wait_psw` is defined in include/boot/s390.h but is implemented in
zipl/boot/libc.c. This results in a dangling definition for s390.h users
other than zipl, due to the missing implementation. Since the function
is only relevant for zipl, move the definition to the corresponding
header file zipl/boot/libc.h
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
include/boot/s390.h relies on s390 specific kernel headers. However,
some tools used this header for non-s390 code (outside of boot-loaders).
To solve this the PSW and PAGE_SIZE definitions are now in separate
header files. All includes for s390.h which are not in boot-loader code
are replaced with one of psw.h or page.h.
This fixes the compilation failure on ppc64le due to conflicting types
for `__vector128`.
Fixes: https://github.com/ibm-s390-linux/s390-tools/issues/151
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
While changing the helper script to create the ngdump filesystem,
some lines were left in the script which now cause the zipl
installation to fail:
Run /lib/s390-tools/zipl_helper.prepare-ngdump /dev/disk/by-path/ccw-0.0.6a56-part1 0
Couldn't find disk by PARTUUID.
Error: Script could not determine dump parameters
Remove the superfluous lines to fix this.
Fixes: 41108c98aa ("zipl: move mkfs to ngdump prepare script")
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Print the name of the section which specifes non-existing image
and/or ramdisk files.
It allows to quickly identify problems after using non-atomic tools
manipulating with bootloader settings.
Signed-off-by: Eduard Shishkin <edward6@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Make the listed changes which are needed to re-use some definitions
by the new zipl-debug(8) tool introduced by the next patch in the
series:
. Add definitions to boot_defs.h:
. a named union disk_bloclkptr (instead of the anonymous one);
. a named structure disk_program_table;
. Remove a 'typedef union disk_blockptr_t' from boot/stage2.h
(cleanup), use the named union in boot_defs.h instead;
. Move the definition of scsi_layout types and the function
get_scsi_layout() from install.c to install.h;
. Move definition of PROGRAM_TABLE_BLOCK_SIZE from bootmap.c to
bootmap.h
Signed-off-by: Eduard Shishkin <edward6@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Since GCC12 several warnings like the following are produced in
zipl/boot compile targets:
CC zipl/boot/stage2.o
stage2.c: In function ‘start’:
stage2.c:99:24: warning: array subscript 0 is outside array bounds of ‘struct stage2_descr[0]’ [-Warray-bounds]
99 | stage2_descr = *(struct stage2_descr*)STAGE2_DESC;
This is the same issue as reported for the Kernel [1][2]. There is
currently no sane fix available, therefore simply disable the warning
for the zipl/boot/ targets.
[1] https://lore.kernel.org/lkml/yt9dzgkelelc.fsf@linux.ibm.com/
[2] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=99578
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
For dasd devices, we need to enable the device before we can use it.
Add the required dasd device to the kernel commandline when installing
ngdump to a dasd device.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
The current code first assembles the ngdump init ramdisk, and creates
the filesystem on the dump disk afterwards. ngdump uses uuids to mount
the dump device. Because the filesystem uuid is changing with the final
mkfs, ngdump has to use the partuuid of the device. This does work for
nvme, but not for dasds. Another problem is that dryrun likely wouldn't
work if there's no partition table on the dump device. To fix these
issues, move the mkfs to the ngdump helper script so we can use the
filesystem uuid. When --dryrun is specified the script passes /dev/null
as ngdump device to make mkinitramfs happy. As the initramdisk is never
used in this case, this shouldn't be a problem.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
CCW and LD-IPL records cannot be used at the same time for dumps because
CCW dump uses the standalone dumper, while LD-IPL uses ngdump. The first
one writes data to the raw disk without any filesystem, while the second
one uses an ext filesystem. Therefore we need a way to tell zipl which
kind of dumper it should install, as both cannot be installed at the
same time. The device given is the same for both types, so we cannot use
this to decide which type to install. Therefore add a '--ldipl-dump' option
so the user can decide which type of dump to use.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Eduard Shishkin <edward6@linux.ibm.com>
Acked-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
In order to allow installing only a list-directed ipl entry, remove
the last-table/number-of-tables logic which always required a legacy
program table. With the new code there's no longer a loop in
prepare_bootloader() which requires a certain start index or order
of tables.
Signed-off-by: Eduard Shishkin <edward6@linux.ibm.com>
Acked-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Instead of depending on array index to decide whether we
did already the preparation work for installing the bootloader,
add an explicit skip_prepare flag to struct install_set.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Eduard Shishkin <edward6@linux.ibm.com>
Acked-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
In preparation of decoupling the program table position from
the block pointer format, rename:
PROGRAM_TABLE_0 to LEGACY_BLKPTR_FORMAT_ID
PRAGRAM_TABLE_1 to BLKPTR_FORMAT_ID
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
To make the code easier to maintain and prepare for ECKD LD-IPL,
split up install_bootloader() into two functions: One which is used
for IPL, and one for dump partitions.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Related Valgrind output:
==1073934== 241,722,000 bytes in 30 blocks are definitely lost in loss record 2 of 2
==1073934== at 0x484417C: malloc (in /usr/libexec/valgrind/vgpreload_memcheck-s390x-linux.so)
==1073934== by 0x1006B8D: misc_malloc (misc.c:33)
==1073934== by 0x1006B8D: misc_read_file (misc.c:150)
==1073934== by 0x100DACD: check_common_ipl_data (job.c:774)
==1073934== by 0x100FE2F: check_job_ipl_data (job.c:827)
==1073934== by 0x100FE2F: check_job_menu_data (job.c:999)
==1073934== by 0x100FE2F: check_job_data (job.c:1139)
==1073934== by 0x100FE2F: job_get (job.c:2011)
==1073934== by 0x1006335: main (zipl.c:141)
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Acked-by: Eduard Shishkin <edward6@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Valgrind finding:
==1083976== 19 bytes in 1 blocks are definitely lost in loss record 1 of 1
==1083976== at 0x484417C: malloc (in /usr/libexec/valgrind/vgpreload_memcheck-s390x-linux.so)
==1083976== by 0x48F3C97: __vasprintf_internal (vasprintf.c:71)
==1083976== by 0x1006861: vasprintf (stdio2.h:218)
==1083976== by 0x1006861: misc_asprintf (misc.c:49)
==1083976== by 0x100C7E1: scan_update_bls_path (scan.c:1874)
==1083976== by 0x100FF4B: get_job_from_config_file (job.c:1901)
==1083976== by 0x100FF4B: job_get (job.c:1997)
==1083976== by 0x1006335: main (zipl.c:141)
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Before commit 5fb6434548 ("zipl: add get_common_components() and
finalize_common_address_data()") the default kernel parmline was only
overwritten if a parmline was specified. After the commit it was always
overwritten, even if no parmline was specified. Let's change this
behavior back by adding a NULL-pointer check. For dump types this change
changes the behavior before commit 5fb6434548 ("zipl: add
get_common_components() and finalize_common_address_data()").
Fixes: 5fb6434548 ("zipl: add get_common_components() and finalize_common_address_data()")
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The current code has different paths to construct the kernel parameters
depending on whether it's a dump kernel or a normal kernel. This would
require adding special handling to get_common_component(), because for
normal kernels the parmline is already set, contrary to dump kernels,
where the command line is constructed later.
To make the code simpler and fix a bug where the default command line no
longer works, move the dump command line processing to an earlier stage.
Also rename the old function to make the function name match what it is
actually doing.
Fixes: 5fb6434548 ("zipl: add get_common_components() and finalize_common_address_data()")
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Currently, each generated loader binary is linked into one data.o object
file which is then linked against boot.o. The data.o file is also used
to generate the data.h header file using nm, which will contain all
symbols required by zipl.
The linking process is somewhat depended on the directory, as the symbol
names are derived from the file names of the input files, which is the
default behavior of the linker. The file name in this case being the
entire path.
Examples for the current situation (starting from root dir in each case):
$ cd zipl/boot && make eckd0_cdl.bin
$ cc -no-pie -static -nostdlib -Wl,--relocatable -Wl,--format,binary -o data.o eckd0_cdl.bin
$ nm data.o
0000000000000018 D _binary_eckd0_cdl_bin_end
0000000000000018 A _binary_eckd0_cdl_bin_size
0000000000000000 D _binary_eckd0_cdl_bin_start
$ make -C zipl/boot eckd0_cdl.bin
$ cc -no-pie -static -nostdlib -Wl,--relocatable -Wl,--format,binary -o data.o zipl/boot/eckd0_cdl.bin
$ nm data.o
000000000000018 D _binary_zipl_boot_eckd0_cdl_bin_end
000000000000018 A _binary_zipl_boot_eckd0_cdl_bin_size
000000000000000 D _binary_zipl_boot_eckd0_cdl_bin_start
The example above shows that the entire path would end up in the symbol
name if specified that way.
To make this more robust, future proof, and get more control of the
resulting symbol names, use '.incbin' and some macros for embedding the
loader binary files. This also reduces the linker step and the
generation of the data.h header file.
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Co-developed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Use linker script for all bootloaders instead of having the load
addresses of the bootloaders hard-coded in the Makefile. This allows us
to simplify the Makefile and it fixes the dependency tracking for the
bootloaders *0.bin, *1.bin, and *1b.bin.
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This allows the reuse of the macro in the next patch. In order to match
the naming scheme rename `STAGE1B_LOAD_ADDR` to `STAGE1B_LOAD_ADDRESS`.
Acked-by: Eduard Shishkin <edward6@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Instead of maintaining an include list, use an exclude list (if
neccessary). This simplifies the `objcopy` calls a lot, and it's
possible because `objcopy -O binary` only includes the memory dump of
the contents of the input object file. [1] This means that sections like
for debug information that do not occupy memory during the process
execution are discarded by design. [2]
In addition, if we do not want a particular ELF section, we can list it
in the discard section of the linker script.
[1] https://man7.org/linux/man-pages/man1/objcopy.1.html
[2] https://man7.org/linux/man-pages/man5/elf.5.html
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This disables the following warning `ld: warning: stage3.exec has a LOAD
segment with RWX permissions` for newer linker. This changes nothing in
functionality for the zipl bootloaders, since only the binaries and not
the ELF files are actually used.
Acked-by: Eduard Shishkin <edward6@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Normally, `gcc` takes care of adding the `GNU_STACK` marking except for
assembly code. Therefore, let's add the marking manually. Discard the
`.note.GNU-stack` section in the linker script since it's just a
"message" from the compiler to the linker. This fixes the linker
warning:
ld: warning: entry.o: missing .note.GNU-stack section implies executable stack
Acked-by: Eduard Shishkin <edward6@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The ELF section `.eh_frame` is used for frame unwinding during, for
example, exception handling and the section `.interp` is used by the
program interpreter. [1] Since no frame unwinding nor a program
interpreter is used for the bootloaders we can discard these input
section.
The content of the (exec|bin) files don't change after this change.
[1] https://refspecs.linuxfoundation.org/LSB_1.2.0/gLSB/specialsections.html
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Fix the improper order of resource releasing resulted in failed umount
Do umount after closing (not before)
Fixes: f7d2339 (zipl: List-Directed IPL from ECKD DASD)
Reported-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Tested-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Eduard Shishkin <edward6@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Make zipl tool prepare ECKD DASD for booting by different IPL
programs (with the same boot record installed).
Besides standard CCW-type IPL, user gets an ability to trigger
(with the same boot record installed!) List-Directed IPL. This
allows to use the feature of secure boot from ECKD DASD (which
is not available for CCW-type IPL).
When using the old boot interfaces, the usual CCW-type IPL is
triggered for DASD. Also for compatibility reasons zipl(8) tool
is modified to create and install one, or two "similar" program
tables per boot partition, depending on job and disk type. The
"similar" program tables differ only in block pointers format.
The old IPL programs (CCW-type IPL) use program table based on the
old format.
All program tables are packed to the same bootmap file. Their
order and logical offsets in the file are not significant (not
used by anyone).
The picture below shows which program table is used for IPL of
specified type from disk of specified type. Here "0" and "1" are
identifiers of program tables based on the old and new block
pointers format respectively. E.g. program table "0" is used for
CCW-type IPL from ECKD DASD. LD-IPL from DASD FBA is unsupported
(respectively, only one program table "0" is used), etc.
CCW-IPL LD-IPL
SCSI X 0
DASD FBA 0 X
ECKD DASD LDL 0 X
ECKD DASD CDL 0 1
Signed-off-by: Eduard Shishkin <edward6@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Set up the secure_boot_supported global variable at the
function bootmap_create() instead of bootmap_create_device()
to make sure that the secure boot status is checked for all
relevant jobs.
Fixes: 7b369318dd ("zipl: check for secure boot once")
Signed-off-by: Eduard Shishkin <edward6@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Prevent double free/close that happens in get_multipath_status()
when the output of "dmsetup status XXX" is empty
Fixes: 599b141 ("zipl: Rewrite helper script in C")
Signed-off-by: Eduard Shishkin <edward6@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This patch enhances the zipl stage3 loader image adding a trailer as
required for secure boot by future firmware versions.
Note: with the change in this patch the padding via objcopy command line
options is replaced by padding via linker script directives with the
same effect.
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Marc Hartmayer