While calculating real CPU SMT utilization, the SMT speedup factor needs
to be taken into account. Speedup factor depends on machine generations
and variations on workload the machine has. The users should be able to
determine the value according to their needs.
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
By using core utilization, thread utilization, and management
utilization, it is possible to determine how much capacity is left or
how much the real CPU SMT utilization is on lpars. Extending hyptop
with this new field provides useful information.
For more info about real CPU SMT utilization:
https://linux.mainframe.blog/smt_utilization/
Briefly:
ur = real SMT util
uc = core util
ut = thread util
um = *management util
s = **speedup factor
ur = ((uc * per_core_thr_count) - ut) / s + (ut - uc) + um
* management utilization:
logical core time spent on hypervisor instead of logical partition.
** speedup factor:
metric used to calculate the SMT utilization on that logical core. This
value varies depending on the workload and the machine generation due
to hardware optimization level.
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The compiler doesn't fully understand the code block that precedes the
usage of `site` in the condition and thus it thinks it could be
uninitialized. Silence the warning with an explicit initialization.
In function 'get_site_from_pers',
inlined from 'dev_table_get_value' at lszdev.c:1079:10:
lszdev.c:258:20: warning: 'site' may be used uninitialized [-Wmaybe-uninitialized]
258 | if (site == SITE_FALLBACK)
| ^
lszdev.c: In function 'dev_table_get_value':
lszdev.c:234:13: note: 'site' was declared here
234 | int site, i, num = 0;
| ^~~~
Closes: https://github.com/ibm-s390-linux/s390-tools/pull/152
Signed-off-by: Dan Horák <dan@danny.cz>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The compiler doesn't fully understand the code block that precedes the
usage of title_off in the condition and thus it thinks it could be
uninitialized. Silence the warning with an explicit initialization.
CC zipl/src/scan.o
In function ‘sort_bls_fields’,
inlined from ‘scan_bls’ at scan.c:1502:8:
scan.c:874:12: warning: ‘title_off’ may be used uninitialized [-Wmaybe-uninitialized]
874 | if (title_off == 0)
| ^
scan.c: In function ‘scan_bls’:
scan.c:842:16: note: ‘title_off’ was declared here
842 | size_t title_off;
| ^~~~~~~~~
GitHub-ID: https://github.com/ibm-s390-linux/s390-tools/pull/152
Signed-off-by: Dan Horák <dan@danny.cz>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The last commit accidentally deleted the TOOLS_DIR for non-s390x
architectures.
Fixes: de013d2f ("Makefile: add genprotimg to non-s390x architectures target list")
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
`genprotimg` can be useful on non-s390x architectures such as x86 or
arm. Therefore add `genprotimg` to the non-s390x target list.
How to build genprotimg on a non-s390x system (s390x cross-compiler
required)
$ # Build and install /usr/bin/genprotimg
$ make -C genprotimg
$ make install -C genprotimg
$ # Build and install the genprotimg bootloaders
$ make -C genprotimg/boot HOST_ARCH=s390x CROSS_COMPILE=s390x-linux-gnu-
$ make install -C genprotimg/boot HOST_ARCH=s390x CROSS_COMPILE=s390x-linux-gnu-
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
The genprotimg bootloaders are s390x specific, so only build them if the
`HOST_ARCH' is set to s390x.
On x86 one can cross-compile and install the bootloaders as follows:
$ make -C genprotimg/boot HOST_ARCH=s390x CROSS_COMPILE=s390x-linux-gnu-
$ make -C genprotimg/boot install HOST_ARCH=s390x CROSS_COMPILE=s390x-linux-gnu-
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
It's cleaner if the bootloader installation code is located in the
boot/Makefile, rather than the top Makefile.
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Under typical circumstances these sysfs attributes should be available
however if the device happens to be in the process of being removed
without the protection of the ap config file lock, this scenario can
be encountered. In this case, ignore the device and assume it is in
the process of being removed.
Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Since this callout reads sysfs values for the specified mdev, the
ap config file lock should be held to prevent other tools from
making changes to the ap configuration at the same time.
Reviewed-by: Jason J. Herne <jjherne@linux.ibm.com>
Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
`load_wait_psw` is defined in include/boot/s390.h but is implemented in
zipl/boot/libc.c. This results in a dangling definition for s390.h users
other than zipl, due to the missing implementation. Since the function
is only relevant for zipl, move the definition to the corresponding
header file zipl/boot/libc.h
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
include/boot/s390.h relies on s390 specific kernel headers. However,
some tools used this header for non-s390 code (outside of boot-loaders).
To solve this the PSW and PAGE_SIZE definitions are now in separate
header files. All includes for s390.h which are not in boot-loader code
are replaced with one of psw.h or page.h.
This fixes the compilation failure on ppc64le due to conflicting types
for `__vector128`.
Fixes: https://github.com/ibm-s390-linux/s390-tools/issues/151
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Use a minimal assembly snippet to check for linker flags. This has the
advantage that it will work even if only the cross-toolchain is
installed, but not, for example, stdlib.
Using the C snippet, the check runs in a similar error like this:
/usr/bin/s390x-linux-gnu-ld: cannot find crt1.o: No such file or directory
/usr/bin/s390x-linux-gnu-ld: cannot find crti.o: No such file or directory
/usr/bin/s390x-linux-gnu-ld: cannot find -lc: No such file or directory
/usr/bin/s390x-linux-gnu-ld: cannot find crtn.o: No such file or directory
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Using option --by-interface with a non-existent network interface name
results in an unexpected duplicate warning message:
$ lszdev --by-interface xx
Could not open directory /sys/class/net/xx: No such file or directory
Could not open directory /sys/class/net/xx: No such file or directory
lszdev: Could not determine device that provides xx (xx)
Fix this by checking for the existence of the associated /sys/class/net
directory before initiating the associated directory traversal.
Reviewed-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
zdev's --by-node option returns exit code 15 (EXIT_RUNTIME_ERROR) when
the specified device node cannot be found. This is inconsistent with
other selection options --by-path and --by-interface which both return
the more appropriate exit code 3 (EXIT_DEVICE_NOT_FOUND).
Fix this by changing --by-node to also return exit code 3 in case the
specified device node does not exist.
Reviewed-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
While changing the helper script to create the ngdump filesystem,
some lines were left in the script which now cause the zipl
installation to fail:
Run /lib/s390-tools/zipl_helper.prepare-ngdump /dev/disk/by-path/ccw-0.0.6a56-part1 0
Couldn't find disk by PARTUUID.
Error: Script could not determine dump parameters
Remove the superfluous lines to fix this.
Fixes: 41108c98aa ("zipl: move mkfs to ngdump prepare script")
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Do not fail to start the daemon if no crypto counters are supported, as
there is still a use case for the daemon to run, as the user can then
use the 'cpacfstats' tool to evaluate that no counter stats are
available. Previously, the user had to check the syslogs for the reason
why the daemon was not running and the cpacfstats command failed.
Before this change:
$ cpacfstats
cpacfstats: Can't access domain socket file '/run/cpacfstatsd_socket', errno=2 [No such file or directory]
cpacfstats: Maybe cpacfstatsd daemon is not running ???
cpacfstats: Can't connect to daemon
After this change:
$ cpacfstats
des counter: unsupported
aes counter: unsupported
sha counter: unsupported
rng counter: unsupported
ecc counter: unsupported
pai_user : unsupported
pai_kernel : unsupported
Also, it's no good practice to let systemd services fail, because
otherwise the system state will be shown as 'degraded':
$ systemctl status
* a46lp59
State: degraded
Jobs: 0 queued
Failed: 1 units
$ systemctl list-units --failed
UNIT LOAD ACTIVE SUB DESCRIPTION
* cpacfstatsd.service loaded failed failed CPACF statistics collection daemon process for Linux on System z
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Print the name of the section which specifes non-existing image
and/or ramdisk files.
It allows to quickly identify problems after using non-atomic tools
manipulating with bootloader settings.
Signed-off-by: Eduard Shishkin <edward6@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The udev-rules generated with the current version of chzdev command
is missing the configuration label, incase of auto configuration,
resulting in an ineffective configuration logic.
Add the missing configuration start label for autoconfig.
Fixes: 2e89722ef0 ("zdev: make site specific udev-rule for ccw")
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
During the boot, the ZDEV_SITE_ID is derived with the help
of loadparm and will be saved in ZDEV_SITE_ID_FILE, which
will be the used by the udev-rules.
ZDEV_SITE_ID_FILE creation can have a surface of symlink attack
as we are directly using the fopen and fprintf on it. To avoid
this, make sure that we are writing the ZDEV_SITE_ID to a temporary
file, which will then be renamed to ZDEV_SITE_ID_FILE, which will
remove all the existing symlinks associated with the target file.
Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
udev does not allow an empty value for keys when importing output
from an external program. Providing an empty value for any key
invokes a warning during the parsing. Currently, ZDEV_SITE_ID for
fallback sites are not assigned any value. Add an empty double
quotes as the value in case of failover sites.
This modification is tested on udevadm version 253 on fedora38.
Also verify that the ZDEV_SITE_ID is properly written, if not log
the error.
Fixes: c8ad5f57d0 ("zdev: modify zdev_id to read the site_id from loadparm")
Reported-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Replace memory allocation functions malloc() and calloc()
by counterparts provided in libutil.a library. Also remove error
handling when no memory could be allocated as those functions do
not return.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Make the listed changes which are needed to re-use some definitions
by the new zipl-debug(8) tool introduced by the next patch in the
series:
. Add definitions to boot_defs.h:
. a named union disk_bloclkptr (instead of the anonymous one);
. a named structure disk_program_table;
. Remove a 'typedef union disk_blockptr_t' from boot/stage2.h
(cleanup), use the named union in boot_defs.h instead;
. Move the definition of scsi_layout types and the function
get_scsi_layout() from install.c to install.h;
. Move definition of PROGRAM_TABLE_BLOCK_SIZE from bootmap.c to
bootmap.h
Signed-off-by: Eduard Shishkin <edward6@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
There are only two users of the `cleanup` label, so let's replace the
goto statements with the label code. This makes the code easier to read.
Especially since another label will be introduced in the next commit.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This patch adds support for Secure Execution with AP pass-through
support for chzcrypt.
chzcrypt details:
* new command: --se-associate <secret-id> <queue device>
* new command: --se-bind <queue device>
* new command: --se-unbind <queue device>
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This patch adds support for Secure Execution with AP pass-through
support for lszcrypt.
lszcrypt details:
* extension to -b: list AP bus features
* extension to -c: now also valid for queue devices, shows
bind and assoicate state in SE environment;
shows MK states (only for current MKs).
* extension to -V: new column SESTAT within an SE guest, shows text
for the BS bits within an SE environment:
"usable", "bond", "avail", "unuse".
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Autoquiesce is a mechanism that tells Linux to stop issuing I/Os to a
specific DASD after certain events.
Add support for configuring related DASD device attributes
that govern the following aspects of autoquiesce:
aq_mask - Configure which events lead to autoquiesce.
aq_requeue - Configure if autoquiesce will requeue all I/O to blocklayer.
aq_timeouts - Configure the number of timeouts before autoquiesce.
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
The 'clean' build targets can be specified alongside other targets,
which causes an immediate removal of build artifacts. Make 'clean'
targets mutually exclusive to avoid this issue and display an error if
'clean' is used in combination with other targets.
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
A subset of s390 tools can be useful on non-s390x architectures such as
x86 or arm. Limit the build targets for these architectures with
'pvattest' and 'libpv' as the first candidates.
A cross compilation on x86 for s390x will still build the entire package
provided that the HOST_ARCH variable is set properly:
$ make HOST_ARCH=s390x CROSS_COMPILE=s390x-linux-gnu-
Cross compilation on s390x for x86 will limit the build targets as
described:
$ make HOST_ARCH=x86_64 CROSS_COMPILE=x86_64-linux-gnu-
Co-developed-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Introduce `BUILD_ARCH` and `(CC|LINK|...|OBJDUMP)_FOR_BUILD` variables
in order to properly support the build of tools that generate code or
data during the build process. Replace existing variables `HOSTCC` with
`CC_FOR_BUILD` and `HOSTCFLAGS` `CFLAGS_FOR_BUILD`. The Makefile
variables for the `HOST_ARCH` are unchanged.
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
In addition, add the ability that a Makefile that includes `common.mak`
can specify the `HOST_ARCH`. Usage example:
$S390_TOOLS/mytool/Makefile:
``` Makefile
HOST_ARCH := s390x
include ../common.mak
```
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
`pkg-config` is a well established tool and all of our required
libraries do provide .pc files. Therefore let's declare `pkg-config` as
required and use it. In addition, remove now useless code.
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Since GCC12 several warnings like the following are produced in
zipl/boot compile targets:
CC zipl/boot/stage2.o
stage2.c: In function ‘start’:
stage2.c:99:24: warning: array subscript 0 is outside array bounds of ‘struct stage2_descr[0]’ [-Warray-bounds]
99 | stage2_descr = *(struct stage2_descr*)STAGE2_DESC;
This is the same issue as reported for the Kernel [1][2]. There is
currently no sane fix available, therefore simply disable the warning
for the zipl/boot/ targets.
[1] https://lore.kernel.org/lkml/yt9dzgkelelc.fsf@linux.ibm.com/
[2] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=99578
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
In certain storage setups the Release Allocated Space (RAS) command to
free up space on the storage server previously allocated for an ESE DASD
might not work. At the moment dasdfmt will error out if RAS is failing.
This however is not ideal for the default case when a user is expecting
dasdfmt to simply format the disk.
One workaround would be to specify --no-discard to disable RAS
completely. However, a sane default handling that tries to work every
time is more reasonable.
Change the default handling as follows: If an ESE is detected default to
QUICK mode and try RAS. If RAS fails, fall back to the FULL format mode
and display a warning accordingly.
If -M (--mode) QUICK is specified explicitly dasdfmt will still error
out on a failing RAS. A combination with --no-discard will still allow
for a QUICK format on an ESE DASD in that case, if desired.
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
`od` in contrast to `xxd` uses the system endianness for displying the
hexdump by default which leads to invalid results on little endian
systems.
Use the `--endian=big` option to fix the endianness problem.
Fixes: 3cc0b4cd ("pvattest/tools: remove xxd dependency from scripts")
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
The script uses bashisms (e.g. `local` keyword) therefore make sure that
bash is used by setting the shebang line to `#!/bin/bash`.
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
