The default values for repeated attempts at acquiring a file lock created
by util_lockfile are on the order of seconds. Let's leave this the
default, but allow for a caller to specify smaller values by adding
cw (custom_wait) functions and by switching from using sleep to usleep.
Reviewed-by: Anthony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Ensure that all hyphens in command options and examples are escaped properly.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Ensure that all hyphens in command options and examples are escaped properly.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
When formatting an ESE (thin-provisioned) ECKD DASD, dasdfmt(8)
defaults to the quick-format mode instead of full-format for normal
DASDs. This results in a significant performance impact during first
sequential write to each track, which may be unexpected for users.
To address this, change the default for dasdfmt to always use
full-format mode. Customers that require thin provisioning(*) still
override the default by specifying quick format explicitly using the
"-M" option.
Get rid of the related fallbacks; In case of unsuccessful space
release always fail. The customers that still require quick format can
proceed by specifying "--no-discard" option.
(*) Thin provisioning: while providing a large amount of logical
space, zero amount of actual space is provisioned and then
allocated on an on-demand basis.
Signed-off-by: Eduard Shishkin <edward6@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Check for vmcore LOAD segment with zero paddr (instead of zero vaddr) to
identify HSA since physical and virtual addresses can be uncoupled on s390.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Acked-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The 'lschp' command's output contains a 'type' identifier column. For
information about each value of this identifier, provide the
reference to the z/OS public documentation in the manpage.
Suggested-by: Mike Storzer <MSTORZER@de.ibm.com>
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Get rid of all arch barriers in main.rs. cmd.rs handles the arch
barriers for the individual commands. Simplifies main.rs & cmd.rs and
makes it easier to read and understand the code.
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Julian Ruess <julianr@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Fix findings from `cargo clippy --all-targets`. `warning: calls to
`push` immediately after creation` The findings were in test code only.
Also, replace a while loop with a function from Vec.
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Julian Ruess <julianr@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
They add no value and code outside the crate does not need those constants.
Reduces unnecessary constant duplication. Introduce an error for to
large Add-Secret requests and check for this to render those contsnts
fully unnecessary for the API.
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Julian Ruess <julianr@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The BinGuestSecret type provides no benefits. The public GuestSecret
struct can handle everything. Therefore, move the two functions from bin
to the non-bin variant. While at it, use a struct to define the binary
structure instead of copy numbers to some positions in a Vec. This
simplifies the addition of further secret types.
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Julian Ruess <julianr@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This streamlines and unifies the use and (de)serialization of structs
using a secret id. As a bonus, the hidden `for_pv` module is not longer
needed.
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Julian Ruess <julianr@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Provides a default for the cmd function for an UvCmd. This is enabled by
requiring an associated constant for the IOCTL nr of the command.
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Julian Ruess <julianr@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The content of `pv/src/uvsecret/uvc.rs` was moved with
9b51b8b882 ("rust/pv: Refactor pv crate") to pv_core.
The content was unused, but the file was not deleted.
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Julian Ruess <julianr@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Fix clippy waring `warning: very complex type used.` by introducing a
new struct containing the tuple, that was returned before.
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Julian Ruess <julianr@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
During the remove of mockito, lazy_static dependency was accidentally
removed as well.
Fix this by adding lazy-static as dev dependency again.
Fixes: aba8900074 ("rust/pv_core: Remove mockito dependency")
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This adds the counter numbers to the corresponding counter names to the
cpacfstats output. This aims to ease using this tool with other related
tools which may use other names for the counters.
Signed-off-by: Finn Callies <fcallies@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
All files created by chzdev feature a common header; however, this
header is absent in temporary files. It is necessary to incorporate
the consistent "Generated by chzdev" header into temporary files
generated by chzdev as well, so as to properly identify these files
via option --is-owner.
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Enhance the 'chzdev' tool by introducing a new option to discern
files created by 'zdev-tools.' The command usage is as follows:
$ chzdev --is-owner <file-name>
When executed, the command will return an exit code of 0 for all
files generated by zdev-tools. In the case of an unknown file, the
tool will return the exit code 'EXIT_UNKNOWN_FILE i.e 33.'
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add zdev-specific definitions into a lightweight header file. Rather
than creating a new one, transform the existing "site.h" into "zdev.h"
to house all generic zdev-specific definitions that needs to be shared
between chzdev, lszdev and zdev_id going forward.
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Up until now cpacfstats assumes that on the running hardware either all
PAI and CPUMF are available or non at all. Which counters are supported
may be hardware dependent and can vary in the future. With
this commit cpacfstats dynamically loads the counters from sysfs entries
in (/sys/devices/pai_crypto/events/) and (/sys/devices/cpum_cf/events/)
respectively.
Additionally cpacfstats has a new way of determining which PAI counters
are meant for kernel usage.
Signed-off-by: Finn Callies <fcallies@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
With f6c6f0cc71 ("rust/pv/test: Code + Certificate refactoring")
no code uses mockito anymore, but it's dependency was not removed.
Remove the mockito dependency from the rust workspace.
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
OpenSSL 1.1 seems to use a non-const parameter to X509_name_dup(), but
x509_armonk_locality_fixup() is passing a const there. The compile then
fails on "discards 'const' qualifier", when -Werror is used. Thus
resolve with a type-cast like in c2b_name().
Fixes: https://github.com/ibm-s390-linux/s390-tools/pull/167
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Dan Horák <dan@danny.cz>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
OpenSSL 1.1 seems to use a non-const parameter to X509_name_dup(), but
x509_armonk_locality_fixup() is passing a const there. The compile then
fails on "discards 'const' qualifier", when -Werror is used. Thus
resolve with a type-cast like in pv_c2b_name().
GitHub-ID: https://github.com/ibm-s390-linux/s390-tools/pull/167
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Dan Horák <dan@danny.cz>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Fix leak of temporary files: if prepare_build_program_table_file()
is called in no dry-run mode and there was an error then the file
@filename will not be deleted in free_bootloader()).
Fix leak of renamed files as well as corruption of previously
created bootmap files with the same name in case of unsuccessful
IPL installation.
Add a special flag to keep a track of file's "temporary" state;
Base the cleanup decision on this flag instead of checking dry-run;
Release resources captured by prepare_bootloader() in the error path;
Move the final rename to be called only after successful installation.
Original logic:
prepare_bootloader_ipl():
prepare_bootloader_ngdump():
always create temporary @filename
if (!dry-run) rename @filename;
install;
cleanup: if (dry_run) drop @filename (*** LEAK ***)
prepare_bootloader_device():
if (dry_run) create temporary @filename
install, don't rename;
cleanup: if (dry_run) drop @filename
New logic:
prepare_bootloader_ipl():
prepare_bootloader_ngdump():
always create temporary @filename and set @tmp_filename_created;
install;
if (!dry_run) rename @filename and clear @tmp_filename_created;
cleanup: if (@tmp_filename_created is set), drop @filename
prepare_bootloader_device():
if (dry_run) create @filename and set @tmp_filename_created;
install, don't rename;
cleanup: if (@tmp_filename_created is set) drop @filename.
Fixes: https://github.com/ibm-s390-tools/s390-tools/issues/165
Signed-off-by: Eduard Shishkin <edward6@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Acked-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Convert the assertion to a GError since an out-of-disk-space situation
is a valid situation that should be handled.
ERROR:utils/crypto.c:1843:__encrypt_decrypt_bio: assertion failed: (num_bytes_written == out_len)
Bail out! ERROR:utils/crypto.c:1843:__encrypt_decrypt_bio: assertion failed: (num_bytes_written == out_len)
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
The parser setup falsely set the argument type as filename array, but
code expected a single filename. Fixed by setting up the parser
correctly to expect a single file name.
Fixes: 3ab06d77fb ("pvattest: Create, perform, and verify attestation measurements")
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
New IBM signing keys will have Armonk as locality in the subject.
Ensure that CRLs with Poughkeepsie as issuer locality are still
discovered if they are signed with the signing keys private key.
Also, drop the check for issuer/subject comparison and only rely on
validity period and cryptographic signatures.
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
New IBM signing certificates will have 'Armonk' as locality in the
subject. Make sure that certificate revocations lists (CRL) with
'Poughkeepsie' as issuer locality are still considered as valid as long
as they are signed with the IBM signing keys private key. In addition,
drop the check for 'issuer(HKD) == subject(HKSK)' as it doesn't improve
security. While at it, remove now unused functions and fix a memory leak
of @akid in `check_crl_issuer`.
Reviewed-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
New IBM signing keys will have Armonk as locality in the subject.
Ensure that CRLs with Poughkeepsie as issuer locality are still
discovered if they are signed with the signing keys private key.
Also, drop the check for issuer/subject comparison and only rely on
validity period and cryptographic signatures.
Reviewed-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
* Get rid of Mockito
* create certs with AKID
* simplify things in the `create_certs.py` script
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
For LUKS2 volumes, zkey generates 'cryptsetup luksFormat' commands with
options '--pbkdf argon2i --pbkdf-memory 32 --pbkdf-force-iterations 4'
for low memory and time requirements. Using the default Argon2i options
might cause out-of-memory errors when multiple encrypted volumes are
unlocked automatically at boot through /etc/crypttab.
When the system runs in FIPS mode, which is indicated by file
/proc/sys/crypto/fips_enabled containing '1', the Argon2i password based
key derivation function might be disabled by a policy, and such
'cryptsetup luksFormat' commands might fail.
Generate '--pbkdf pbkdf2' instead if the system runs in FIPS mode.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
