In case of SEV-SNP guest devices use sw-iotlb to gain access guest
memory for DMA. For that F_IOMMU/F_ACCESS_PLATFORM must be exposed in
the feature set of virtio devices.
Signed-off-by: Jinank Jain <jinankjain@microsoft.com>
Signed-off-by: Muminul Islam <muislam@microsoft.com>
According to PCIe specification, a 64-bit MMIO BAR should be
naturally aligned. In addition to being more compliant with
the specification, natural aligned BARs are mapped with
the largest possible page size by the host iommu driver, which
should speed up boot time and reduce IOTLB thrashing for virtual
machines with VFIO devices.
Signed-off-by: Thomas Barrett <tbarrett@crusoeenergy.com>
The 'generate_ram_ranges' function currently hardcodes the assumption
that there are only 2 E820 RAM entries. This is not flexible enough to
handle vendor specific memory holes. Returning a Vec is also more
convenient for users of this function.
Signed-off-by: Thomas Barrett <tbarrett@crusoeenergy.com>
Since the ACPI tables are generated inside the IGVM file in case of
SEV-SNP guest. So, we don't need to generate it inside the cloud
hypervisor.
Signed-off-by: Jinank Jain <jinankjain@microsoft.com>
Signed-off-by: Muminul Islam <muislam@microsoft.com>
... enabled VMs. IOEvents are not supported in case of SEV-SNP VMs. All
the IO events are delievered via GHCB protocol.
Signed-off-by: Jinank Jain <jinankjain@microsoft.com>
Signed-off-by: Muminul Islam <muislam@microsoft.com>
This will help in identify whether a VM supports sev-snp and based on
that disable/enable certain features.
Signed-off-by: Jinank Jain <jinankjain@microsoft.com>
Signed-off-by: Muminul Islam <muislam@microsoft.com>
Implement workflow to to run static analysis and linting of all shell
scripts by using shfmt and shellcheck.
Fixes: #5396
Signed-off-by: Ruslan Mstoi <ruslan.mstoi@intel.com>
We occasionally saw cloud-hypervisor crashed due to seccomp violations. The
coredumps showed the HTTP API thread crashing after it attempted to call
sched_yield(). The call came from rust stdlib's mpmc module, which calls
sched_yield() if several attempts to busy-wait for a condition to fulfil fall
short.
Since the system call is harmless and it comes from the stdlib, I opted to allow
all threads to call it.
Signed-off-by: Peteris Rudzusiks <rye@stripe.com>
Currently the only way to set the affinity for virtio block threads is
to boot the VM, search for the tid of each of the virtio block threads,
then set the affinity manually. This commit adds an option to pin virtio
block queues to specific host cpus (similar to pinning vcpus to host
cpus). A queue_affinity option has been added to the disk flag in
the cli to specify a mapping of queue indices to host cpus.
Signed-off-by: acarp <acarp@crusoeenergy.com>
Traditional way to configure vcpu don't work for sev-snp guests. All the
vCPU configuration for SEV-SNP guest is provided via VMSA.
Signed-off-by: Jinank Jain <jinankjain@microsoft.com>
Signed-off-by: Muminul Islam <muislam@microsoft.com>
This also fixes the following clippy warning on nightly build from cargo
fuzz:
warning: struct `RegionEntry` is never constructed
--> /home/chenb/project/cloud-hypervisor/cloud-hypervisor/block/src/vhdx/vhdx_header.rs:357:8
|
357 | struct RegionEntry {
| ^^^^^^^^^^^
|
= note: `RegionEntry` has derived impls for the traits `Debug` and `Clone`, but these are intentionally ignored during dead code analysis
= note: `#[warn(dead_code)]` on by default
Signed-off-by: Bo Chen <chen.bo@intel.com>
For all VFIO devices, map all non-emulated MMIO regions to
the vfio container to allow PCIe P2P between all VFIO devices
on the virtual machine. This is required for a wide variety of
advanced GPU workloads such as GPUDirect P2P (DMA between two
GPUs), GPUDirect RDMA (DMA between a GPU and an IB device).
Signed-off-by: Thomas Barrett <tbarrett@crusoeenergy.com>
Currently kernel and firmware are checked as a payload.
IGVM should be checked as well. Otherwise, it hangs indefinitely.
Signed-off-by: Muminul Islam <muislam@microsoft.com>
Unaccepted GPA is usually thrown by Microsoft hypervisor in case of
mismatch between GPA and GVA mappings. This is a fatal message from the
hypervisor perspective so we would need to error out from the vcpu run
loop. Along with add some debug message to identify the broken mapping
between GVA and GPA.
Signed-off-by: Jinank Jain <jinankjain@microsoft.com>
Signed-off-by: Muminul Islam <muislam@microsoft.com>
On guests with large amounts of memory, using the `prefault` option can
lead to a very long boot time. This commit implements the strategy
taken by QEMU to prefault memory in parallel using multiple threads,
decreasing the time to allocate memory for large guests by
an order of magnitude or more.
For example, this commit reduces the time to allocate memory for a
guest configured with 704 GiB of memory on 1 NUMA node using 1 GiB
hugepages from 81.44134669s to just 6.865287881s.
Signed-off-by: Sean Banko <sbanko@crusoeenergy.com>
The `ByteValued` trait implementations for the data structures from the
'linux_loader' crate are no longer needed, and hence their wrappers can
be removed.
Signed-off-by: Bo Chen <chen.bo@intel.com>
Fix beta clippy issue:
error: file opened with `create`, but `truncate` behavior not defined
--> src/main.rs:624:26
|
624 | .create(true)
| ^^^^^^^^^^^^- help: add: `.truncate(true)`
|
= help: if you intend to overwrite an existing file entirely, call `.truncate(true)`
= help: if you instead know that you may want to keep some parts of the old file, call `.truncate(false)`
= help: alternatively, use `.append(true)` to append to the file instead of overwriting it
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#suspicious_open_options
= note: `-D clippy::suspicious-open-options` implied by `-D warnings`
= help: to override `-D warnings` add `#[allow(clippy::suspicious_open_options)]`
Signed-off-by: Bo Chen <chen.bo@intel.com>
The embedded error in the enum will be read on debug output of the
error.
Fixes beta clippy issue:
warning: field `0` is never read
--> vhost_user_block/src/lib.rs:64:23
|
64 | CreateKillEventFd(io::Error),
| ----------------- ^^^^^^^^^
| |
| field in this variant
|
= note: `#[warn(dead_code)]` on by default
help: consider changing the field to be of unit type to suppress this warning while preserving the field numbering, or remove the field
|
64 | CreateKillEventFd(()),
| ~~
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
The embedded error in the enum will be read on debug output of the
error.
Fixes beta clippy issue:
warning: field `0` is never read
--> performance-metrics/src/performance_tests.rs:25:11
|
25 | Infra(InfraError),
| ----- ^^^^^^^^^^
| |
| field in this variant
|
= note: `#[warn(dead_code)]` on by default
help: consider changing the field to be of unit type to suppress this warning while preserving the field numbering, or remove the field
|
25 | Infra(()),
| ~~
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
warning: field `0` is never read
--> block/src/qcow/vec_cache.rs:139:21
|
139 | struct NumCache(pub u64);
| -------- ^^^^^^^
| |
| field in this struct
|
= note: `#[warn(dead_code)]` on by default
help: consider changing the field to be of unit type to suppress this warning while preserving the field numbering, or remove the field
|
139 | struct NumCache(());
| ~~
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
These structs directly embed another struct and then implement
ByteValued on that struct to implement ByteValued for the inner struct.
As such the inner struct is never directly accessed so to avoid the dead
code analysis mark this as allowed.
Beta clippy fix:
warning: field `0` is never read
--> arch/src/x86_64/mod.rs:129:32
|
129 | struct MemmapTableEntryWrapper(hvm_memmap_table_entry);
| ----------------------- ^^^^^^^^^^^^^^^^^^^^^^
| |
| field in this struct
|
= note: `MemmapTableEntryWrapper` has a derived impl for the trait `Clone`, but this is intentionally ignored during dead code analysis
= note: `#[warn(dead_code)]` on by default
help: consider changing the field to be of unit type to suppress this warning while preserving the field numbering, or remove the field
|
129 | struct MemmapTableEntryWrapper(());
|
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
Beta clippy fix
warning: useless use of `vec!`
--> tests/integration.rs:5845:23
|
5845 | let kernels = vec![direct_kernel_boot_path()];
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: you can use an array directly: `[direct_kernel_boot_path()]`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#useless_vec
= note: `#[warn(clippy::useless_vec)]` on by default
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
Beta clippy fix:
warning: initializer for `thread_local` value can be made `const`
--> vmm/src/sigwinch_listener.rs:27:40
|
27 | static TX: RefCell<Option<File>> = RefCell::new(None);
| ^^^^^^^^^^^^^^^^^^ help: replace with: `const { RefCell::new(None) }`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#thread_local_initializer_can_be_made_const
= note: `#[warn(clippy::thread_local_initializer_can_be_made_const)]` on by default
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
Beta clippy fix:
warning: this call to `as_ref.map(...)` does nothing
--> vmm/src/device_manager.rs:1234:9
|
1234 | self.console_resize_pipe.as_ref().map(Arc::clone)
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: try: `self.console_resize_pipe.clone()`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#useless_asref
= note: `#[warn(clippy::useless_asref)]` on by default
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
According to crates.io the crc-any crate is actively maintained which
avoids issues with the crc32c crate and the nightly compiler.
Fixes: #6168
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
When we import a page, we have a page with
some data or empty, empty does not mean there is no data,
it rather means it's full of zeros. We can skip writing the
data as guest memory of the page is already zeroed.
A page could be partially filled and the rest of the content is zero.
Our IGVM generation tool only fills data here if there is some data
without zeros. Rest of them are padded. We only write data
without padding and compare whether we complete writing
the buffer content. Still it's a full page and update the variable
with length of the full page.
Signed-off-by: Muminul Islam <muislam@microsoft.com>
When the HTT flag CPUID.1.EDX[HTT] is 0, it indicates that there is
only a single logical processor in the package. When HTT is 1, it
indicates that CPUID.1.EBX[23:16] contains the number of logical
processors in the package.
When this information is not included in CPUID leaf 0x1, some cpu
topology enumeration software such as hwloc are known to crash.
Signed-off-by: Thomas Barrett <tbarrett@crusoeenergy.com>
This commit adds the debug-console (or debugcon) device to CHV. It is a
very simple device on I/O port 0xe9 supported by QEMU and BOCHS. It is
meant for printing information as easy as possible, without any
necessary configuration from the guest at all.
It is primarily interesting to OS/kernel and firmware developers as they
can produce output as soon as the guest starts without any configuration
of a serial device or similar. Furthermore, a kernel hacker might use
this device for information of type B whereas information of type A are
printed to the serial device.
This device is not used by default by Linux, Windows, or any other
"real" OS, but only by toy kernels and during firmware development.
In the CLI, it can be configured similar to --console or --serial with
the --debug-console parameter.
Signed-off-by: Philipp Schuster <philipp.schuster@cyberus-technology.de>
Set the SEV control register so we know where to
start running. This register configures the
SEV feature control state on a virtual processor.
Signed-off-by: Jinank Jain <jinankjain@microsoft.com>
Signed-off-by: Muminul Islam <muislam@microsoft.com>
This register configures the SEV feature control
state on a virtual processor.
Signed-off-by: Jinank Jain <jinankjain@microsoft.com>
Signed-off-by: Muminul Islam <muislam@microsoft.com>
Consistent with the other data structures and constants used in TDX
support code import the necessary structures from the kernel for
accessing the vmcall structure.
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
These Default implementations either don't produce valid configs, are
no longer used outside of tests, or both.
For the tests, we can define our own local "default" values that make
the most sense for the tests, without worrying about what's
a (somewhat) sensible "global" default value.
Signed-off-by: Alyssa Ross <hi@alyssa.is>
Bumping anyhow crate from 1.0.75 to 1.0.79 will cause seccomp
failures through integration tests. Newly added backtrace support
relies on readlink and many other syscalls.
Issue noticed with test_api_http_pause_resume test, where second time
of VM PAUSE or VM RESUME prints error and causes panic.
Noticed that panic message in a thread which is not allowed to write
output triggered the issue.
So implementing Display trait for HttpError and ApiError enums to avoid
adding many syscalls to seccomp filter section.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@intel.com>
On hosts with >256 cpus, setting the cpu affinity to a host cpu index
>255 will return an error because type of `host_cpu` is `u8`.
This commit changes the type of `host_cpu` to `usize` to remove this
limitation.
Signed-off-by: Sean Banko <sbanko@crusoeenergy.com>
Move the duplicated logic to download OVMF into a helper function.
Explicitly specify the OVMF_FW_TAG instead of downloading the latest
so that new OVMF versions can be easily tested.
Signed-off-by: Thomas Barrett <tbarrett@crusoeenergy.com>
Testing instructions are very old and type=dpdkvhostuser is
deprecated from DPDK.
logs from /var/log/openvswitch/ovs-vswitchd.log
|netdev_dpdk|WARN|dpdkvhostuser ports are considered deprecated;
please migrate to dpdkvhostuserclient ports
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@intel.com>
Uses of the old ApiRequest enum conflated two different concerns:
identifying an API request endpoint, and storing data for an API
request. This led to ApiRequest values being passed around with junk
data just to communicate a request type, which forced all API request
body types to implement Default, which in some cases doesn't make any
sense — what's the "default" path for a vhost-user socket? The
nonsensical Default values have led to tests relying on being able to
use nonsensical data, which is an impediment to adding better
validation for these types.
Rather than having API request types be represented by an enum, which
has to carry associated body data everywhere it's used, it makes more
sense to represent API request types as trait objects. These can have
an associated type for the type of the request body, and this makes it
possible to pass API request types and data around as siblings in a
type-safe way without forcing them into a single value even where it
doesn't make sense. Trait objects also give us dynamic dispatch,
which lets us get rid of several large match blocks.
To keep it possible to fuzz the HTTP API, all the Vmm methods called
by the HTTP API are pulled out into a trait, so the fuzzer can provide
its own stub implementation of the VMM.
Signed-off-by: Alyssa Ross <hi@alyssa.is>
With the change in 7bc764d to expose the SVM bit for nested
virtualisation test_vfio can be re-enabled on the AMD workers.
Fixes: #5895
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
When using amd topology, the svm feature flag on cpuid leaf
0x8000_0001.ecx is overwritten. We update the amd cpu topology
logic to use the flag values that originated in
KVM_GET_SUPPORTED_CPUID ioctl and override as necessary.
Signed-off-by: Thomas Barrett <tbarrett@crusoeenergy.com>
warning: this URL is not a hyperlink
--> arch/src/aarch64/layout.rs:114:58
|
114 | ...in https://www.kernel.org/doc/Documentation/arm64/booting.txt.
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: use an automatic link instead: `<https://www.kernel.org/doc/Documentation/arm64/booting.txt.>`
|
= note: bare URLs are not automatically turned into clickable links
= note: `#[warn(rustdoc::bare_urls)]` on by default
I also noticed that it looks like this comment was supposed to be
applied to FDT_MAX_SIZE, not FDT_START, so I moved it.
Signed-off-by: Alyssa Ross <hi@alyssa.is>
The VIRTIO specification[1] says:
> The upper 32 bits of the CID are reserved and zeroed.
We should therefore not allow the user to supply a VSOCK CID with
those bits set. To accomplish this, limit the public API of the
virtio-vsock device to only accept 32-bit CIDs, while still using
64-bit CIDs internally since that's how virtio-vsock works.
[1]: https://docs.oasis-open.org/virtio/virtio/v1.2/csd01/virtio-v1.2-csd01.html#x1-4400004
Signed-off-by: Alyssa Ross <hi@alyssa.is>
I accidentally ran a VM with CID 2 (VMADDR_CID_HOST), and very strange
and difficult to debug behavior ensued. I don't think a virtio-vsock
device should be allowed to have any of the special CIDs
(VMADDR_CID_ANY, VMADDR_CID_HYPERVISOR, VMADDR_CID_LOCAL, VMADDR_CID_HOST).
Signed-off-by: Alyssa Ross <hi@alyssa.is>
The socket is nonblocking, so it's not guaranteed that it will be
possible to read the whole connect command in a single iteration of
the event loop. To reproduce:
(echo -n 'CONNECT '; sleep 1; echo 1234; cat) | socat STDIO UNIX-CONNECT:vsock.sock
This would produce the error:
cloud-hypervisor: 5.509209s: <_vsock4> INFO:virtio-devices/src/vsock/unix/muxer.rs:446 -- vsock: error adding local-init connection: UnixRead(Os { code: 11, kind: WouldBlock, message: "Resource temporarily unavailable" })
To fix this, if we only get a partial command, we need to save it for
future iterations of the event loop, and only proceed once we've read
a complete command.
Signed-off-by: Alyssa Ross <hi@alyssa.is>
Complete the isolated import, telling the
Microsoft hypervisor that import is done so that
MSHV can issue SNP_LAUNCH_FINISH command.
Signed-off-by: Muminul Islam <muislam@microsoft.com>
Use right and exact size 32 bytes for host data field
for completing the isolated import. This way OOB
can be avoided during a function call.
Signed-off-by: Muminul Islam <muislam@microsoft.com>
Import all the isolated pages after parsing is
done on the iGVM file. Hypervisor adds those
pages for PSP measurement(part of the hashing).
Signed-off-by: Muminul Islam <muislam@microsoft.com>
Current instructions are incorrect and there is now a new profile called
dev-opt to build the debug version of TD-SHIM.
Signed-off-by: Jinank Jain <jinankjain@microsoft.com>
Under the fuzzer this code appears dead:
error: field `0` is never read
--> /home/rob/src/cloud-hypervisor/arch/src/x86_64/mod.rs:128:32
|
128 | struct MemmapTableEntryWrapper(hvm_memmap_table_entry);
| ----------------------- ^^^^^^^^^^^^^^^^^^^^^^
| |
| field in this struct
|
= note: `MemmapTableEntryWrapper` has a derived impl for the trait `Clone`, but this is intentionally ignored during dead code analysis
= note: `-D dead-code` implied by `-D warnings`
= help: to override `-D warnings` add `#[allow(dead_code)]`
help: consider changing the field to be of unit type to suppress this warning while preserving the field numbering, or remove the field
|
128 | struct MemmapTableEntryWrapper(());
| ~~
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
Add a 'rate_limit_groups' field to VmConfig that defines a set of
named RateLimiterGroups.
When the 'rate_limit_group' field of DiskConfig is defined, all
virtio-blk queues will be rate-limited by a shared RateLimiterGroup.
The lifecycle of all RateLimiterGroups is tied to the Vm.
A RateLimiterGroup may exist even if no Disks are configured to use
the RateLimiterGroup. Disks may be hot-added or hot-removed from the
RateLimiterGroup.
When the 'rate_limiter' field of DiskConfig is defined, we construct
an anonymous RateLimiterGroup whose lifecycle is tied to the Disk.
This is primarily done for api backwards compatability. Importantly,
the behavior is not the same! This implementation rate_limits the
aggregate bandwidth / iops of an individual disk rather than the
bandwidth / iops of an individual queue of a disk.
When neither the 'rate_limit_group' or the 'rate_limiter' fields of
DiskConfig is defined, the Disk is not rate-limited.
Signed-off-by: Thomas Barrett <tbarrett@crusoeenergy.com>
Add a 'rate_limiter/group' module that defines the RateLimiterGroup
and a RateLimiterGroupHandle types.
The RateLimiterGroupHandle can be used in place of a RateLimiter to
limit the aggregate bandwidth and/or ops of multiple virtio-blk or
virtio-net queues.
Each RateLimiterGroup has an associated worker thread that broadcasts
an event to each RateLimiterGroupHandle when a RateLimiter is unblocked.
Signed-off-by: Thomas Barrett <tbarrett@crusoeenergy.com>
CI reports errors:
error: writing `&Vec` instead of `&[_]` involves a new object where a slice will do
--> arch/src/x86_64/mod.rs:1351:19
|
1351 | epc_sections: &Vec<SgxEpcSection>,
| ^^^^^^^^^^^^^^^^^^^ help: change this to: `&[SgxEpcSection]`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#ptr_arg
= note: `-D clippy::ptr-arg` implied by `-D warnings`
= help: to override `-D warnings` add `#[allow(clippy::ptr_arg)]`
Signed-off-by: Yi Wang <foxywang@tencent.com>
CI reports clippy errors:
error: argument to `Path::join` starts with a path separator
--> tests/integration.rs:4076:58
|
4076 | let serial_socket = guest.tmp_dir.as_path().join("/tmp/serial.socket");
| ^^^^^^^^^^^^^^^^^^^^
|
= note: joining a path starting with separator will replace the path instead
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#join_absolute_paths
Signed-off-by: Yi Wang <foxywang@tencent.com>
CI reports clippy errors:
error: in a `match` scrutinee, avoid complex blocks or closures with blocks; instead, move the block or closure higher and bind it with a `let`
--> test_infra/src/lib.rs:93:51
|
93 | match (|| -> Result<(), WaitForBootError> {
| ___________________________________________________^
94 | | let listener =
95 | | TcpListener::bind(listen_addr.as_str()).map_err(WaitForBootError::Listen)?;
96 | | listener
... |
145 | | }
146 | | })() {
| |_________^
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#blocks_in_conditions
= note: `-D clippy::blocks-in-conditions` implied by `-D warnings`
= help: to override `-D warnings` add `#[allow(clippy::blocks_in_conditions)]`
Signed-off-by: Yi Wang <foxywang@tencent.com>
This PR addresses a bug in which the cpu topology of a guest
with non power-of-two number of cores is incorrect. For example,
in some contexts, a virtual machine with 2-sockets and 12-cores
will incorrectly believe that 16 cores are on socket 1 and 8
cores are on socket 2. In other cases, common topology enumeration
software such as hwloc will crash.
The root of the problem was the way that cloud-hypervisor generates
apic_id. On x86_64, the (x2) apic_id embeds information about cpu
topology. The cpuid instruction is primarily used to discover the
number of sockets, dies, cores, threads, etc. Using this information,
the (x2) apic_id is masked to determine which {core, die, socket} the
cpu is on. When the cpu topology is not a power of two
(e.g. a 12-core machine), this requires non-contiguous (x2) apic_id.
Signed-off-by: Thomas Barrett <tbarrett@crusoeenergy.com>
The following tests have been temporarily disabled:
1. Live upgrade/migration test with ovs-dpdk (#5532);
2. Disk hotplug tests on windows guests (#6037);
This patch has been tested with PR #6048.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@intel.com>
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
Tested-by: Bo Chen <chen.bo@intel.com>
For SEV-SNP guests we need to provide the extended memory. It follows a
very simple layout and very similar to other x86 guests.
First segment: [HIGH_RAM_START - MEM_32BIT_RESERVED_START]
PCI hole: [MEM_32BIT_RESERVED_START - RAM_64BIT_START]
Second segment: [RAM_64BIT_START - RAM_END]
Fixes#5993
Signed-off-by: Jinank Jain <jinankjain@microsoft.com>
The 'test_vfio_user' is prone to fail when the system is under high
workloads with errors:
```
Error while connecting to /var/tmp/spdk.sock
Is SPDK application running?
Error details: Invalid or non-existing address: '/var/tmp/spdk.sock'
```
This is because SPDK is not fully functional before we request to
create a nvme device using the vfio_user protocol. This patch stabilize
this test with allowing retires to execute host commands.
Signed-off-by: Bo Chen <chen.bo@intel.com>
This patch defines a new function 'generate_ram_ranges', to generate
usable physical memory ranges for the guest based on the existing guest
memory managed by VMM. This function is also made public, so that it can
be reused, say by the IGVM loader in the future [1].
No functional change.
See: #6020
Signed-off-by: Bo Chen <chen.bo@intel.com>
This patch adds missing new lines after functions,
fixes few typos in the comments, adds few missing
comments to SNP related functions.
Signed-off-by: Muminul Islam <muislam@microsoft.com>
There is no requirement to call copy_from_slice, since all the member
variables are identical and we can directly assign them value.
Signed-off-by: Jinank Jain <jinankjain@microsoft.com>
There is a mix of v2, v3 and v4 in the codebase. Let's move to v4
everywhere because v2 seems to be using a deprecated version of nodejs.
This is throwing warnings when the Github action CI is running.
Signed-off-by: Jinank Jain <jinankjain@microsoft.com>
Currently there are some inconsistencies in Cargo.toml which is causing
the following warnings during the build process:
Error parsing Cargo.toml manifest, fallback to caching entire file:
Invalid TOML document: expected key-value, found comma
Signed-off-by: Jinank Jain <jinankjain@microsoft.com>
vmm: Add igvm module and loader module
Add a separate module named igvm to the vmm crate
with definitions to parse and load igvm to the guest memory.
Signed-off-by: Jinank Jain <jinankjain@microsoft.com>
Signed-off-by: Muminul Islam <muislam@microsoft.com>
Add necessary API to retrieve cpuid leaf on MSHV.
This API is used to update cpuid information
during the parsing of the igvm file.
Microsoft hypervisor does not provide common
CpuID like KVM. That's why we need to call this API
during the IGVM parsing.
Signed-off-by: Muminul Islam <muislam@microsoft.com>
This patch adds igvm to the Vm config and params as well as
the command line argument to pass igvm file to load into
guest memory. The file must maintain the IGVM format.
The CLI option is featured guarded by igvm feature gate.
The IGVM(Independent Guest Virtual Machine) file format
is designed to encapsulate all information required to
launch a virtual machine on any given virtualization stack,
with support for different isolation technologies such as
AMD SEV-SNP and Intel TDX.
At a conceptual level, this file format is a set of commands created
by the tool that generated the file, used by the loader to construct
the initial guest state. The file format also contains measurement
information that the underlying platform will use to confirm that
the file was loaded correctly and signed by the appropriate authorities.
The IGVM file is generated by the tool:
https://github.com/microsoft/igvm-tooling
The IGVM file is parsed by the following crates:
https://github.com/microsoft/igvm
Signed-off-by: Muminul Islam <muislam@microsoft.com>
Random failures of downloading `cloud-hypervisor-static-aarch64` with
`wget` were seen. The commit applies a workaround to retry the download
for a few times.
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
This commit changes existing behavior of named TAP interfaces.
When booting a VM with configuration for a named TAP interface,
cloud-hypervisor will create the interface and apply a given
IP configuration to that interface. If the named interface
already exists on the system, the configuration is NOT overwritten.
Setting the ip and netmask fields in a tap interface configuration
for a named tap interface now works by handing this configuration
to the virtio_devices::Net object when it is created with a name.
This commit also touches net_util to make sure that the ip configuration
of existing TAP interfaces is not modified with ip or netmask handed to
open_tap.
Signed-off-by: Markus Sütter <markus.suetter@secunet.com>
The wget has been causing frequent CI failure for the past few days,
while it can't be reproduced manually. Let's show the wget details in
our CI pipeline to understand better future errors.
Signed-off-by: Bo Chen <chen.bo@intel.com>
Running on host where vdpa_sim_blk module is not correctly loaded
test_vdpa_block passes.
"test common_parallel::test_vdpa_block ... ok"
This commit fixes the vdpa_sim_blk test to fail in that case.
Signed-off-by: Ruslan Mstoi <ruslan.mstoi@intel.com>
Valid title format:
component1[, component2, componentN]: submodule: summary
Title should have at least one component
Components are separated by comma+space: ", "
Components are validated to be in valid_components
Components list is ended by a colon
Submodules are not validated
See: #5846
Signed-off-by: Ruslan Mstoi <ruslan.mstoi@intel.com>
We can skip the CI worker build if the changes are only from gitlint, or
the hidden files in the root folder, such as .github, .gitignore,
.gitlint, .rustfmt.toml, and .typos.toml.
Signed-off-by: Bo Chen <chen.bo@intel.com>
This is particularly useful for commits with long component names. Of
course, it is better to have concise subject that is less than 50 char.
Signed-off-by: Bo Chen <chen.bo@intel.com>
As part SMP bringup for a SEV-SNP guest, BSP sets up the VMSA page for
each AP threads and informs hypervisor about the same using a VMGEXIT.
Thus, extend the current GHCB interface to handle this scenario.
Signed-off-by: Jinank Jain <jinankjain@microsoft.com>
SEV-SNP guest can request AMD's secure co-processor i.e., PSP to
generate an runtime attesation report. During this process guest needs
to inform PSP about the request and response GPAs where that report
would be generated by the PSP. This is handled via a VMGEXIT request.
Thus, extend the current GHCB handling to add support for it.
Signed-off-by: Jinank Jain <jinankjain@microsoft.com>
We found that it's slow to load JSON when reading snap files. As
described in [1], using from_slice instead of from_reader can fix
this.
Also, fix the error type being returned.
1. https://github.com/serde-rs/json/issues/160
Signed-off-by: Yi Wang <foxywang@tencent.com>
Since the 'write()' to the event file was moved to its own thread
(see #5633), we have no reliable way to read the latest contents of
the event file from our integration tests, since we can't ensure the
'read()' from our test always happen after 'write()' is completed from
Cloud Hypervisor. This is also why we started to see random failures on
snapshot_restore tests (particularly when the system workload is high).
This patch adds a 1s sleep before reading the event file to mitigate the
random failures.
Signed-off-by: Bo Chen <chen.bo@intel.com>
error: use of a fallible conversion when an infallible one could be used
Error: --> virtio-devices/src/vhost_user/vu_common_ctrl.rs:206:51
|
206 | let actual_size: usize = queue.size().try_into().unwrap();
| ^^^^^^^^^^^^^^^^^^^ help: use: `into()`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_fallible_conversions
= note: `-D clippy::unnecessary-fallible-conversions` implied by `-D warnings`
= help: to override `-D warnings` add `#[allow(clippy::unnecessary_fallible_conversions)]`
error: could not compile `virtio-devices` (lib) due to previous error
Error: warning: build failed, waiting for other jobs to finish...
error: could not compile `virtio-devices` (lib test) due to previous error
Error: The process '/home/runner/.cargo/bin/cargo' failed with exit code 101
Signed-off-by: Bo Chen <chen.bo@intel.com>
When the script is invoked via dev_cli.sh, it always gets AUTH_DOWNLOAD_TOKEN
from the environment. The original test always returns true.
Signed-off-by: Wei Liu <liuwe@microsoft.com>
Instead of relying on "wc" and "grep", this patch provides helper
functions for checking line counts and searching/counting keywords.
To understand assertion failures better, it also generate logs for the
L1/L2 VM commands when checks fail.
Signed-off-by: Bo Chen <chen.bo@intel.com>
Add a test that supports configuring serial and console as TTY mode
at the same time. With this configuration, the VM can set up a legacy
serial device as an early printk console device, and then change to a
virito console device after the virito console device is initialized.
In this case, we can capture the logs printed by legacy serial on early
boot, and later by the virtio console.
Signed-off-by: Yong He <alexyonghe@tencent.com>
Cloud Hypovrisor supports legacy serial device and virito console device
for VMs. Using legacy serial device, CH can capture full VM console logs,
but its implementation is based on KVM PIO emulation and has poor
performance. Using the virtio console device, the VM console logs will
be sent to CH through the virtio ring, the performance is better, but CH
will only capture the VM console logs after the virtio console device is
initialized, the VM early startup logs will be discarded.
This patch provides a way to enable both the legacy serial device and the
virtio console device as a TTY mode by setting the leagcy serial port as
the VM's early printk device and setting the virtio console as the VM's
main console device.
Then CH can capture early boot logs from the legacy serial device and
capture later logs from the virito console device with better performance.
Signed-off-by: Yong He <alexyonghe@tencent.com>
The script "run_integration_tests_vfio.sh" requires to be ran on a
specific machine with specific hardware (e.g. the "vfio" bera-metal
worker equipped with a Nvidia Tesla T4 card). So the provisioning of the
running machine is out of the scope of this script, including the custom
guest image with Nvidia drivers installed, and properly configured
Nvidia Tesla T4 card.
See: #4405, #5509
Signed-off-by: Bo Chen <chen.bo@intel.com>
With #4324 being resolved, the nested VFIO test (e.g. "test_vfio") is
now a part of the general Azure VM-based workers. No need to run it on
the bare-metal worker.
Signed-off-by: Bo Chen <chen.bo@intel.com>
Now, default values for vcpu topology are 0s, that is not correct and may
lead to bug. Fix it by setting default value to 1s. Also add check in
case one or more of these values are zero.
Fixes: #5892
Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>
virtiofsd must be built with the default gnu toolchain so clear the
environment variables that may poisoned by the alternative C library
support.
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
The seccompiler v0.4.0 started to use `seccomp` syscall instead of the
`prctl` syscall. Also, threads for virtio-deivces should not need any of
these syscalls anyway.
Signed-off-by: Bo Chen <chen.bo@intel.com>
MMIO emulation is also performed via VMGEXIT in case of SEV-SNP guest.
Emulation is done in a very similar way like a regular guest. Just need
to make sure that guest memory is access via read/write GPA hypercall
instead of directly accessing it.
Signed-off-by: Jinank Jain <jinankjain@microsoft.com>
Signed-off-by: Muminul Islam <muislam@microsoft.com>
Legacy port emulation requires reading RAX register from GHCB page for
SEV-SNP guest. This is the major difference between a regular guest and
SEV-SNP enabled guest.
Signed-off-by: Jinank Jain <jinankjain@microsoft.com>
Signed-off-by: Muminul Islam <muislam@microsoft.com>
Currently MSHV does not support fetching extended guest report and thus
return an appropriate error stating the NAE event is not valid.
Signed-off-by: Jinank Jain <jinankjain@microsoft.com>
Signed-off-by: Nuno Das Neves <nudasnev@microsoft.com>
As part of this handling there are 4 different operations:
1. Getting the hypervisor preffered doorbell page GPA.
2. Informing hypervisor about the doorbell page chosen by the guest
3. Querying the GPA of the doorbell page
4. Clearing the GPA of the doorbell page from hypervisor
Signed-off-by: Jinank Jain <jinankjain@microsoft.com>
Signed-off-by: Muminul Islam <muislam@microsoft.com>
As part of handling this request, hypervisor is expected to three
things:
1. Maximum GHCB protocol version supported.
2. Minimum GHCB protocol version supported.
3. SEV-page table encryption bit number.
If the guest cannot support the protocol range supplied by the
hypervisor, it should terminate
Signed-off-by: Muminul Islam <muislam@microsoft.com>
Signed-off-by: Jinank Jain <jinankjain@microsoft.com>
SEV-SNP guest allocates a GHCB page and in order to update hypervisor
about the same, there is a vmgexit which allows registering GHCB page
with the hypervisor.
Signed-off-by: Jinank Jain <jinankjain@microsoft.com>
Signed-off-by: Muminul Islam <muislam@microsoft.com>
A VMGEXIT exit occurs for any of the listed NAE events in the GHCB
specification [1] (e.g. CPUID, RDMSR/WRMSR, MMIO, port IO, etc.). Some
of these events are handled by hypervisor while other are handled by
VMM. Currently, we are adding support for one such request i.e.,
report supported SEV-SNP features by hypervisor.
[1] GHCB protocol specification:
https://www.amd.com/content/dam/amd/en/documents/epyc-technical-docs/specifications/56421.pdf
Signed-off-by: Jinank Jain <jinankjain@microsoft.com>
Signed-off-by: Muminul Islam <muislam@microsoft.com>
This is the function that needs to be called by the VMM
to inform the MSHV that isolation is complete and inform
PSP about this completion.
Signed-off-by: Jinank Jain <jinankjain@microsoft.com>
Signed-off-by: Muminul Islam <muislam@microsoft.com>
Add hypervisor VM specific API to import the isolated
pages. Hypervisor adds those pages for PSP measurement.
Signed-off-by: Jinank Jain <jinankjain@microsoft.com>
Signed-off-by: Muminul Islam <muislam@microsoft.com>
This patch fixes following warnings:
error: boolean to int conversion using if
--> vmm/src/vm.rs:866:42
|
| .create_vm_with_type(if sev_snp_enabled.into() {
| __________________________________________^
| | 1 // SEV_SNP_ENABLED
| | } else {
| | 0 // SEV_SNP_DISABLED
| | })
| |_____________________^ help: replace with from: `u64::from(sev_snp_enabled.into())`
|
= note: `-D clippy::bool-to-int-with-if` implied by `-D warnings`
= note: `sev_snp_enabled.into() as u64` or `sev_snp_enabled.into().into()` can also be valid options
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#bool_to_int_with_if
error: useless conversion to the same type: `bool`
--> vmm/src/vm.rs:866:45
|
| .create_vm_with_type(if sev_snp_enabled.into() {
| ^^^^^^^^^^^^^^^^^^^^^^ help: consider removing `.into()`: `sev_snp_enabled`
|
= note: `-D clippy::useless-conversion` implied by `-D warnings`
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#useless_conversion
error: could not compile `vmm` due to 2 previous errors
Signed-off-by: Muminul Islam <muislam@microsoft.com>
Partially revert 111225a2a5
and add the new dbus and pvpanic arguments.
As we are switching back to clap observe the following changes.
A few examples:
1. `-v -v -v` needs to be written as`-vvv`
2. `--disk D1 --disk D2` and others need to be written as `--disk D1 D2`.
3. `--option value` needs to be written as `--option=value.`
Change integration tests to adapt to the breaking changes.
Signed-off-by: Wei Liu <liuwe@microsoft.com>
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@intel.com>
There is no need to set them in the test scripts while the main script
already has them.
The consolidates how things are done.
Signed-off-by: Wei Liu <liuwe@microsoft.com>
There is no need to reconstruct it from within the scripts since the
main script already constructed it once.
Drop the previously useless setting of BUILD_TARGET from various
scripts. The value was always overwritten at a later point.
No functional change intended.
Signed-off-by: Wei Liu <liuwe@microsoft.com>
Sev-Snp on MSHV uses igvm crate to parse the igvm file.
igvm crate needs minimum rust version 1.65 to build.
Signed-off-by: Muminul Islam <muislam@microsoft.com>
This struct contains all configuration fields that controls the way how
we generate CPUID for the guest on x86_64. This allows cleaner extension
when adding new configuration fields.
Signed-off-by: Bo Chen <chen.bo@intel.com>
For a SEV-SNP enabled partition on MSHV, some of the VMGEXITS are
offloaded for Hypervisor to handle while the rest are handled by VMM.
By setting this additional partition property hypervisor is informed
about the VMGEXITs it needs to take care off, rest all would be handled
by the CloudHypervisor.
Signed-off-by: Jinank Jain <jinankjain@microsoft.com>
The lock to `vm_config` is held for accessing `cpus.kvm_hyperv` passing
as a reference to `arch::generate_common_cpuid()`, so acquiring the same
lock again while calling to the same function is a deadlock.
Fixes: 3793ffe888
Reported-by: Yi Wang <foxywang@tencent.com>
Signed-off-by: Bo Chen <chen.bo@intel.com>
As part of this initialization for a SEV-SNP VM on MSHV, it is required
that we transition the guest state to secure state using partition
hypercall. This implies all the created VPs will transition to secure
state and could access the guest encrypted memory.
Signed-off-by: Jinank Jain <jinankjain@microsoft.com>
When performing integration testing on the Ampere One server, an error occurred when compiling spdk and not recognizing the CPU ID.
The latest spdk already contains fixes.
Signed-off-by: dom.song <dom.song@amperecomputing.com>
It's a requirement that a SEV-SNP enabled guest on MSHV must have
isolation policy set before launching the guest.
Signed-off-by: Jinank Jain <jinankjain@microsoft.com>
Cloud-Hypervisor takes a path for Unix socket, where it will listen
on. Users can connect to the other end of the socket and access serial
port on the guest.
"--serial socket=/path/to/socket" is the cmdline option to pass to
cloud-hypervisor.
Users can use socat like below to access guest's serial port once the
guest starts to boot:
socat -,crnl UNIX-CONNECT:/path/to/socket
Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com>
The 'derive' feature of `zerocopy` crate now is optional and requires to
be enabled explicitly [1]. Also, a version bump on `acpi_tables` is
needed to reply on a single version of `zerocopy` to avoid compilation
errors.
[1] https://github.com/google/zerocopy/pull/176
Signed-off-by: Bo Chen <chen.bo@intel.com>
Include the TSC frequency as part of the KVM state so that it will be
restored at the destination.
This ensures migration works correctly between hosts that have a
different TSC frequency if the guest is running with TSC as the source
of timekeeping.
Fixes: #5786
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
The bare metal machines are now not reachable from our Jenkins
controller, and causing CI pipeline timeout for the past few days.
Signed-off-by: Bo Chen <chen.bo@intel.com>
The cumulative average formula [1] requires to use signed integers
for proper calculations, while calculated result (e.g. cumulative
average) is always positive. This patch reflects the above requirements
in our code.
[1] https://en.wikipedia.org/wiki/Moving_average#Cumulative_averageFixes: #5745
Signed-off-by: Bo Chen <chen.bo@intel.com>
Fix make error:
$ make -C BaseTools -j `nproc`
/bin/sh: line 1: python: command not found
make[1]: *** [GNUmakefile:11: test] Error 127
Signed-off-by: Ruslan Mstoi <ruslan.mstoi@intel.com>
Bump these crates need to be bumped together to avoid build issues from
shared structures.
Signed-off-by: dependabot[bot] <support@github.com>
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
EntryPoint had an optional entry_addr, but there is no usage of this
struct that makes it necessary that the address is optional.
Remove the Option to avoid being able to express things that are not
useful.
Signed-off-by: Julian Stecklina <julian.stecklina@cyberus-technology.de>
This fixes all typos found by the typos utility with respect to the config file.
Signed-off-by: Philipp Schuster <philipp.schuster@cyberus-technology.de>
There is a "LATENCY_SCALE" being used for calculating cumulative average
latency, so it should also be used for the latency of the first op.
See: #5712
Signed-off-by: Bo Chen <chen.bo@intel.com>
Update to the latest vm-memory and all the crates that also depend upon
it.
Fix some deprecation warnings.
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
We need to make sure that SEV-SNP and TDX are not enabled at the same
time. As these two features belong to mutually exclusive hardware
vendors. So, we should make sure that these two features are not enabled
at the same. Thus, a compile time check for it.
Signed-off-by: Jinank Jain <jinankjain@microsoft.com>
Creating some brief documentation for SEV-SNP, summarizing the links on
where to find more information about SEV-SNP, as well as how to build
and run Cloud Hypervisor on it.
This document is a work in progress and will be updated in future PRs
as we add support for it.
Signed-off-by: Jinank Jain <jinankjain@microsoft.com>
This feature flag gates the development for SEV-SNP enabled guest.
Also add a helper function to identify if SNP should be enabled for the
guest.
Signed-off-by: Jinank Jain <jinankjain@microsoft.com>
The worker is running focal not bionic - this fixes build issues on that
worker machine due to the bionic version not being installable.
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
This is necessary for O_DIRECT based use of raw block devices which may
require access at a larger block size than that of a sector (512 bytes.)
Fixes: #5722
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
It doens't make sense to limit this to the async_io module and import
across modules so place in default create module.
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
Assume rax is 0xfee003e0 and the displacement is negative 0x60. The effective
address is then 0xfee00380. This is perfectly valid.
Example instruction:
c7 40 a0 00 10 00 00 movl $0x1000,-0x60(%rax)
Signed-off-by: Philipp Schuster <philipp.schuster@cyberus-technology.de>
Logically until we have handled the first operation the latency is
infinite; this logic was applied to the minimum latency originally but
this patch extends that logic to the maximum and average latency.
To prevent the initial average latency being skewed by the inclusion of
infinity the average value is initally seeded with the first measured
latency.
Fixes: #5704
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
In the documentation of function check_latest_events_exact use same events
argument name as in the implementation
Signed-off-by: Ruslan Mstoi <ruslan.mstoi@intel.com>
Since kernel v6.3 the vsock packet is not split over two descriptors
and is instead included in a single one.
This change is based on the discovery and fix identified by Stefano
Garzarella for the vm-virtio vsock implementation and adapted for our
very different codebase.
Fixes: #5691
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
This commit builds on top of the `Monitor::subscribe` function and
makes it possible to broadcast events published from `event-monitor`
over D-Bus.
The broadcasting functionality is enabled if the D-Bus API is enabled
and users who wish to also enable the file based `event-monitor` can do
so with the CLI arg `--event-monitor`.
Signed-off-by: Omer Faruk Bayram <omer.faruk@sartura.hr>
There is no need for this struct to be public and since it is used in
this module the #[allow(dead_code)] invocation can be removed.
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
warning: this argument is a mutable reference, but not used mutably
--> vmm/src/device_manager.rs:1908:35
|
1908 | fn set_raw_mode(&mut self, f: &mut dyn AsRawFd) -> vmm_sys_util::errno::Result<()> {
| ^^^^^^^^^^^^^^^^ help: consider changing to: `&dyn AsRawFd`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_pass_by_ref_mut
= note: `#[warn(clippy::needless_pass_by_ref_mut)]` on by default
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
warning: this argument is a mutable reference, but not used mutably
--> src/bin/ch-remote.rs:397:52
|
397 | fn dbus_api_do_command(toplevel: &TopLevel, proxy: &mut DBusApi1ProxyBlocking<'_>) -> ApiResult {
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: consider changing to: `&DBusApi1ProxyBlocking<'_>`
|
= note: this is cfg-gated and may require further changes
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_pass_by_ref_mut
= note: `#[warn(clippy::needless_pass_by_ref_mut)]` on by default
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
warning: this argument is a mutable reference, but not used mutably
--> virtio-devices/src/transport/pci_common_config.rs:100:17
|
100 | queues: &mut [Queue],
| ^^^^^^^^^^^^ help: consider changing to: `&[Queue]`
|
= warning: changing this function will impact semver compatibility
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_pass_by_ref_mut
= note: `#[warn(clippy::needless_pass_by_ref_mut)]` on by default
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
warning: this argument is a mutable reference, but not used mutably
--> hypervisor/src/arch/x86/emulator/instructions/mod.rs:22:15
|
22 | platform: &mut dyn PlatformEmulator<CpuState = T>,
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: consider changing to: `&dyn PlatformEmulator<CpuState = T>`
|
= note: this is cfg-gated and may require further changes
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_pass_by_ref_mut
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
warning: this argument is a mutable reference, but not used mutably
--> net_util/src/queue_pair.rs:167:14
|
167 | tap: &mut Tap,
| ^^^^^^^^ help: consider changing to: `&Tap`
|
= warning: changing this function will impact semver compatibility
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_pass_by_ref_mut
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
warning: this argument is a mutable reference, but not used mutably
--> block/src/async_io.rs:68:28
|
68 | fn query_block_size(f: &mut File, block_size_type: BlockSize) -> std::io::Result<u64> {
| ^^^^^^^^^ help: consider changing to: `&File`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_pass_by_ref_mut
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
warning: boolean expression will never evaluate to 'true'
--> block/src/vhdx/vhdx_metadata.rs:136:20
|
136 | if disk_spec.block_size < BLOCK_SIZE_MIN && disk_spec.block_size > BLOCK_SIZE_MAX {
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
= note: since `BLOCK_SIZE_MIN` < `BLOCK_SIZE_MAX`, the expression evaluates to false for any value of `disk_spec.block_size`
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#impossible_comparisons
= note: `#[warn(clippy::impossible_comparisons)]` on by default
&& was used when || should have been used
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
Similar to balloon inflation, memory allocation is also constrained to
align with the page size. Therefore, memory is allocated in units of the
host page size, one page at a time, until all host pages that the memory
range requested by the guest are managed. If the requested size is
smaller than the page size, the entire page will still be allocated
because smaller allocations are not possible due to the page size
limitation.
Fixes: cloud-hypervisor#5369
Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>
Currently, virtio-balloon can't work well with page size other than 4k.
The virtio-balloon always works in units of 4kiB (BALLOON_PAGE_SIZE), but
we can only actually discard memory in units of the host page size.
We get some idea from [1] to solve this issue.
What has been done in this commit:
For balloon inflation:
A bitmap is employed to track the memory range to be released in 4k
granularity. Once it accumulates to one host page size, the corresponding
page is released, and the bitmap is cleared to handle the next record.
This process continues until all the memory range is managed. Memory will
only be released when a consecutive set of balloon request entries from
the same host page reaches the full host page size. If a balloon request
entry from a different host page is encountered, the bitmap and the base
host page address will be reset. Consequently, memory is released in
units of the page size, ensuring efficient memory management. That's say
if memory range length to be released smaller than page size or if the
guest scatters requests each of whose size is smaller than page size
across different host pages no memory will be released.
[1] https://patchwork.kernel.org/project/qemu-devel/patch/20190214043916.22128-6-david@gibson.dropbear.id.au/
Fixes: cloud-hypervisor#5369
Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>
Add pending removed vcpu check according to VcpuState.removing, which
can avoid cloud hypervisor hangup during continual vcpu resize.
Fix#5419
Signed-off-by: Yi Wang <foxywang@tencent.com>
These had to be previously disabled because a released binary has to be
used in course of the test scenario. The necessary functionality is now
supported with the release 34.0, thus these tests should now pass.
Fixes: #5660
Signed-off-by: Anatol Belski <anbelski@linux.microsoft.com>
We fixed the L2 and L3 level cache sharing issues and confirmed that the
L2 level cache is independent, while the L3 level cache is shared per-socket.
See:#5505
Signed-off-by: zhongbingnan <zhongbingnan@bytedance.com>
This patch modifies `event_monitor` to ensure that concurrent access to
`event_log` from multiple threads is safe. Previously, the `event_log`
function would acquire a reference to the event log file and write
to it without doing any synchronization, which made it prone to
data races. This issue likely went under the radar because the
relevant `SAFETY` comment on the unsafe block was incomplete.
The new implementation spawns a dedicated thread named `event-monitor`
solely for writing to the file. It uses the MPMC channel exposed by
`flume` to pass messages to the `event-monitor` thread. Since
`flume::Sender<T>` implements `Sync`, it is safe for multiple threads
to share it and send messages to the `event-monitor` thread.
This is not possible with `std::sync::mpsc::Sender<T>` since it's
`!Sync`, meaning it is not safe for it to be shared between different
threads.
The `event_monitor::set_monitor` function now only initializes
the required global state and returns an instance of the
`Monitor` struct. This decouples the actual logging logic from the
`event_monitor` crate. The `event-monitor` thread is then spawned by
the `vmm` crate.
Signed-off-by: Omer Faruk Bayram <omer.faruk@sartura.hr>
These tests require a binary from a previous release to perform a
migration. That binary doesn't yet have the shutdown fixes and thus
these tests are supposed to fail. The tests are to be re-enabled after
the next release.
Signed-off-by: Anatol Belski <anbelski@linux.microsoft.com>
The fixup_msix_region() function added in
a718716831
made the assumption that MSI-X was always available. This is the case
with many VFIO devices and all our virtio devices but created regression
with MSI devices.
Simply return the existing region size if MSI-X is not supported by the
device.
Fixes: #5649
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
With the addition of the spinning waiting for the exit event to be
received in the CMOS device a regression was introduced into the CMOS
fuzzer. Since there is nothing to receive the event in the fuzzer and
there is nothing to update the bit the that the device is looping on;
introducing an infinite loop.
Use an Option<> type so that when running the device in the fuzzer no
Arc<AtomicBool> is provided effectively disabling the spinning logic.
Fixes: https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=61165
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
As the container image can be used on both Intel and AMD,
ensure the SPDK binaries are compatible. This implies -march=skylake
passed to the underlaying toolchain.
Signed-off-by: Anatol Belski <anbelski@linux.microsoft.com>
Now feature "mshv" can be built together with "kvm". There is no need to
use "--no-default-features" any more.
Fixes: #5647
Signed-off-by: Bo Chen <chen.bo@intel.com>
The reset system is asynchronous with an I/O event (PIO or MMIO) for
ACPI/i8042/CMOS triggering a write to the reset_evt event handler. The
VMM thread will pick up this event on the VMM main loop and then trigger
a shutdown in the CpuManager. However since there is some delay between
the CPU threads being marked to be killed (through the
CpuManager::cpus_kill_signalled bool) it is possible for the guest vCPU
that triggered the exit to be re-entered when the vCPU KVM_RUN is called
after the I/O exit is completed.
This is undesirable and in particular the Linux kernel will attempt to
jump to real mode after a CMOS based exit - this is unsupported in
nested KVM on AMD on Azure and will trigger an error in KVM_RUN.
Solve this problem by spinning in the device that has triggered the
reset until the vcpus_kill_signalled boolean has been updated
indicating that the VMM thread has received the event and called
CpuManager::shutdown(). In particular if this bool is set then the vCPU
threads will not re-enter the guest.
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
Currently if container registry is inaccessible the image will be built
locally and that takes time. This patch adds support to use mirror
registry. To use a different registry CTR_IMAGE environment variable
must be set. For example:
CTR_IMAGE="registry/cloud-hypervisor" scripts/dev_cli.sh
or
export CTR_IMAGE="registry/cloud-hypervisor"
scripts/dev_cli.sh
Signed-off-by: Ruslan Mstoi <ruslan.mstoi@intel.com>
Split interrupt source group restore into two steps, first restore
the irqfd for each interrupt source entry, and second restore the
GSI routing of the entire interrupt source group.
This patch will reduce restore latency of interrupt source group,
and in a 200-concurrent restore test, the patch reduced the
average IOAPIC restore time from 15ms to 1ms.
Signed-off-by: Yong He <alexyonghe@tencent.com>
The VFIO tests based on the NVMe emulation framework require cause a
high number of file descriptors to be opened on the system. On systems
with a low limit on opened files, tests like test_vfio_user can possibly
fail with "too many open files" exeption. This issue is fixed by raising
the corresponding limit.
A tricky detail here is, that the limit has to be changed in the test
container and not on the host. As the the container is executed in the
privileged mode, the setting in it will override the host value.
Related: #5426
Signed-off-by: Anatol Belski <anbelski@linux.microsoft.com>
Add integration test of coredump with no need pause.
As file of coredump has been tested in test_coredump(), so this
patch only test vm state after coredump.
Signed-off-by: Yi Wang <foxywang@tencent.com>
If the VMM is not already paused then pause the VM prior to executing
the coredump and then resume it after. If the VM is already paused then
the original state is maintained.
Signed-off-by: Yi Wang <foxywang@tencent.com>
As the commit 2f15d027c05f (KVM: x86: Properly handle APF vs disabled
LAPIC situation) has been merged into kernel 5.13, so update the minimum
performance host kernel version to that.
Signed-off-by: Yi Wang <foxywang@tencent.com>
The commit b92fe648e9 (vmm: cpu: Disable KVM_FEATURE_ASYNC_PF_INT in
CPUID) disabled APF (Asynchronous Page Fault) mechanism to address
problem that makes vcpu thread spin 100%. As the actual issue is in
KVM, which has been merged in commit 2f15d027c05f (KVM: x86: Properly
handle APF vs disabled LAPIC situation) since 2021, so it's okay to
re-enable APF now.
Signed-off-by: Yi Wang <foxywang@tencent.com>
Add MSHV_CREATE_DEVICE, MSHV_SET_DEVICE_ATTR ioctls to filters. These
ioctls are required to passthrough PCI devices on mshv.
Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com>
The pause of vcpu is async now, which makes the vm pause is not
synchronised. As virtio device calls paused_sync wait() to make
sure device_manager pause synchronously, if we make vcpu pause
synchronously, the vm pause can be synchronously then. After
vm.pause() returns the vm is really paused now.
This patch adds a AtomicBool variable to mark vcpu paused state,
to make sure the pause of CpuManager is synchronised.
Signed-off-by: Yi Wang <foxywang@tencent.com>
This test case creates a new qcow2 file using the image of ubuntu as
its backing file, and boot a virtual machine with this image file.
Signed-off-by: Yu Li <liyu.yukiteru@bytedance.com>
This preserves any data that the backing file had on a cluster when
doing a write to a subset of that cluster. These writes cause a
performance penalty on creating new clusters if a backing file is
present.
This commit is based on crosvm implementation:
5ad3bc3459
Signed-off-by: Yu Li <liyu.yukiteru@bytedance.com>
Reads to qcow files with backing files will fall through to the backing
file if there is no allocated cluster. As of this change, a write will
still trash the cluster and hide any data already present.
This commit is based on crosvm implementation:
d8144a56e2
Signed-off-by: Yu Li <liyu.yukiteru@bytedance.com>
This commit allows opening qcow with a backing file, which supports any
type implementing `BlockBackend`.
This commit is based on crosvm implementation:
9ca6039b03
Signed-off-by: Yu Li <liyu.yukiteru@bytedance.com>
This commit introduces the trait `BlockBackend` with generic ops
including read, write and seek, which can be used for common I/O
interfaces for the block types without using `DiskFile` and `AsyncIo`.
Signed-off-by: Yu Li <liyu.yukiteru@bytedance.com>
This commit merges crates `qcow`, `vhdx` and `block_util` into the
crate `block`, which can allow `qcow` to use functions from `block_util`
without introducing a circular crate dependency.
This commit is based on crosvm implementation:
f2eecc4152
Signed-off-by: Yu Li <liyu.yukiteru@bytedance.com>
This commit introduces a generic type `FixedVhd` for its sync and async
disk I/O types, and the disk I/O types will use it directly instead of
maintaining a file themselves.
Signed-off-by: Yu Li <liyu.yukiteru@bytedance.com>
Using this over the LocalApic supports APIC IDs (and hence number of
vCPUs) above 256 (size increases from u8 to u32.)
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
If the VM has been configured but not yet booted, all we need to do to
support removing a device is to remove it from the config, so it will
never be created.
Signed-off-by: Alyssa Ross <hi@alyssa.is>
This fixes the valid VM config unit tests, which would otherwise fail
to deserialize their expected JSON config due to the missing "gdb" field.
Signed-off-by: Alyssa Ross <hi@alyssa.is>
error: private item shadows public glob re-export
Error: --> hypervisor/src/mshv/mod.rs:42:27
|
42 | CpuIdEntry, FpuState, LapicState, MsrEntry, SpecialRegisters, StandardRegisters,
| ^^^^^^^^^^
|
note: the name `LapicState` in the type namespace is supposed to be publicly re-exported here
--> hypervisor/src/mshv/mod.rs:16:9
|
16 | pub use mshv_bindings::*;
| ^^^^^^^^^^^^^^^^
note: but the private item here shadows it
--> hypervisor/src/mshv/mod.rs:42:27
|
42 | CpuIdEntry, FpuState, LapicState, MsrEntry, SpecialRegisters, StandardRegisters,
| ^^^^^^^^^^
= note: `-D hidden-glob-reexports` implied by `-D warnings`
Signed-off-by: Yu Li <liyu.yukiteru@bytedance.com>
warning: usage of `Arc<T>` where `T` is not `Send` or `Sync`
--> virtio-devices/src/vsock/device.rs:376:22
|
376 | backend: Arc::new(RwLock::new(backend)),
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
= help: consider using `Rc<T>` instead or wrapping `T` in a std::sync type like `Mutex<T>`
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#arc_with_non_send_sync
= note: `#[warn(clippy::arc_with_non_send_sync)]` on by default
The vsock backend may be shared between threads, so the type `B` in
`Vsock` should be `VsockBackend` and `Sync`.
Considering that `api_receiver` and `gdb_receiver` are only used in vmm
threads, the `Arc` can be replaced by `Rc`.
Signed-off-by: Yu Li <liyu.yukiteru@bytedance.com>
warning: useless use of `vec!`
--> test_infra/src/lib.rs:111:30
|
111 | let mut events = vec![epoll::Event::new(epoll::Events::empty(), 0); 1];
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: you can use an array directly: `[epoll::Event::new(epoll::Events::empty(), 0); 1]`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#useless_vec
= note: `#[warn(clippy::useless_vec)]` on by default
Signed-off-by: Yu Li <liyu.yukiteru@bytedance.com>
warning: casting raw pointers to the same type and constness is unnecessary (`*const protocol::MemoryRange` -> `*const protocol::MemoryRange`)
--> vm-migration/src/protocol.rs:280:17
|
280 | self.data.as_ptr() as *const MemoryRange as *const u8,
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: try: `self.data.as_ptr()`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_cast
= note: `#[warn(clippy::unnecessary_cast)]` on by default
Signed-off-by: Yu Li <liyu.yukiteru@bytedance.com>
This gives users the chance to reduce the number of dependencies
included, which is generally good practice and also reduces code size.
Furthermore, `io_uring` specifically is a strong contender for something
one may wish to disable due to the syscall API's many security issues[1]
[1]: https://security.googleblog.com/2023/06/learnings-from-kctf-vrps-42-linux.html
Signed-off-by: Manish Goregaokar <manishsmail@gmail.com>
test_cpu_affinity needs the number of host CPUs. Since it is possible
for the host to have more than 255 CPUs; increase the size of the
datatype used for parsing the string to accomodate this.
Signed-off-by: dom.song <dom.song@amperecomputing.com>
Add integration test for pvpanic, by two methods:
- the vendor id and device id of pci device in guest
- triggering a guest panic and check event-monitor.
Also, to support pvpanic-pci driver, add pvpanic config
in resources.
Signed-off-by: Yi Wang <foxywang@tencent.com>
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
Implemetion of BusDevice and PciDevice trait for pvpanic device.
Pvpanic device can be implemented as an ISA device or as a
PCI device, we choose PCI device for now.
Signed-off-by: Yi Wang <foxywang@tencent.com>
Introduce emulation of pvpanic device to allow cloud hypervisor to get
the notify from guest's pvpanic driver when guest kernel crash.
Signed-off-by: Yi Wang <foxywang@tencent.com>
This reverts commit efb579b224.
This PR was mistakenly merged due to the confusion around nightly
builds. The vm-memory update needs to be done in both the root workspace
and fuzz workspace together.
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
On x86-64, when the underlying hypervisor platform is KVM, no
instruction emulator is necessary. KVM handles instruction boundaries
internally.
This change allows to skip the iced-x86 dependency on KVM, improving
build times, prunes the dependency graph and reduces network traffic
during the initial build.
For Hyper-V, the emulator is still necessary on x86-64, so nothing
changes there.
Signed-off-by: Christian Blichmann <cblichmann@google.com>
Otherwise, CONFIG_DEBUG_INFO will be enabled automatically bloating the
size of the kernel image.
Now the size of kernel image is reduced from 635M to 60M on x86_64.
Signed-off-by: Bo Chen <chen.bo@intel.com>
The extra vCPU threads will be created and advertised to the running kernel. The kernel does not bring up the CPUs immediately and instead the user must "online" them from inside the VM:
@@ -56,7 +56,7 @@ After a reboot the added CPUs will remain.
Removing CPUs works similarly by reducing the number in the "desired_vcpus" field of the reisze API. The CPUs will be automatically offlined inside the guest so there is no need to run any commands inside the guest:
@@ -244,7 +244,7 @@ After a reboot the added PCI device will remain.
Removing a PCI device works the same way for all kind of PCI devices. The unique identifier related to the device must be provided. This identifier can be provided by the user when adding the new device, or by default Cloud Hypervisor will assign one.
build -p OvmfPkg/IntelTdx/IntelTdxX64.dsc -a X64 -t GCC5 -b RELEASE
```
@@ -100,7 +103,7 @@ firmware:
### TDShim
> **Note**
> The latest version of TDShim being tested is [_66bb334_](https://github.com/confidential-containers/td-shim/tree/66bb33451befbf1291abe3cfea7ee9e99d922b0d).
> The latest version of TDShim being tested is [_v0.8.0_](https://github.com/confidential-containers/td-shim/releases/tag/v0.8.0).
This is a lightweight version of the TDVF, written in Rust and designed for
direct kernel boot, which is useful for containers use cases.
@@ -110,7 +113,7 @@ and `LLVM` first. The TDshim can be build as follows:
@@ -7,13 +7,13 @@ The target audience of this document is both:
## Control
The number of `-v` parameters passed to the `cloud-hypervisor` binary will determine the log level. Currenly the default is log messages up to `WARN:` (`warn!`) are included by default. The `--log-file` allows the log to be sent to a location other than `stderr`.
The number of `-v` parameters passed to the `cloud-hypervisor` binary will determine the log level. Currently the default is log messages up to `WARN:` (`warn!`) are included by default. The `--log-file` allows the log to be sent to a location other than `stderr`.
## Levels
### `error!()`
For immediate, unrecoverable errors where it does not make sense for the execution to continue as the behaviour of the VM is considerablely impacted.
For immediate, unrecoverable errors where it does not make sense for the execution to continue as the behaviour of the VM is considerably impacted.
Cloud Hypervisor should exit shortly after reporting this error (with a non-zero exit code). Generally this should be used during initial construction of the VM state before the virtual CPUs have begun running code.
@@ -23,7 +23,7 @@ Users should react to this error by checking their initial VM configuration.
### `warn!()`
A serious problem has occured but the execution of the VM can continue although some functionality might be impacted.
A serious problem has occurred but the execution of the VM can continue although some functionality might be impacted.
A typical example of where this level of message should be generated is during an API call request that cannot be fulfilled.
@@ -38,6 +38,6 @@ This level is for the benefit of developers. It should be used for sporadic and
### `debug!()`
Use `-v -v` to enable.
Use `-vv` to enable.
For the most verbose of logging messages. It is acceptable to "spam" the log with repeated invocations of the same message. This level of logging would be combined with `--log-file`.
For the most verbose of logging messages. It is acceptable to "spam" the log with repeated invocations of the same message. This level of logging would be combined with `--log-file`.
--memory-zone <memory-zone> User defined memory zone parameters "size=<guest_memory_region_size>,file=<backing_file>,shared=on|off,hugepages=on|off,hugepage_size=<hugepage_size>,host_numa_node=<node_id>,id=<zone_identifier>,hotplug_size=<hotpluggable_memory_size>,hotplugged_size=<hotplugged_memory_size>,prefault=on|off"
```
This parameter expects one or more occurences, allowing for a list of memory
This parameter expects one or more occurrences, allowing for a list of memory
zones to be defined. It must be used with `--memory size=0`, clearly indicating
that the memory will be described through advanced parameters.
@@ -516,7 +516,7 @@ different distances, it can be described with the following example.
The Microsoft Hypervisor is a Type 1 hypervisor which runs on x64 and ARM64 architectures. As the foundation of the Hyper-V virtualization stack, it runs millions of Linux and Windows guests in Azure and on-premises deployments. It supports nested virtualization, and security features like AMD's SEV-SNP. It also supports various features in Windows such as [Device guard and confidential guard](https://techcommunity.microsoft.com/t5/iis-support-blog/windows-10-device-guard-and-credential-guard-demystified/ba-p/376419), and [WSL2](https://docs.microsoft.com/en-us/windows/wsl/wsl2-faq)
Since 2020, Microsoft has been releasing open-source components to support Linux running as root partition on the Microsoft Hypervisor.
1. Kernel patches to support Linux booting as root partition
2. A Linux kernel driver exposing an IOCTL interface for managing guest partitions, via a device node - /dev/mshv
3. Rust bindings and IOCTL wrappers
4. IGVM related crates
## Components
The following components are related to MSHV support with Cloud-Hypervisor:
* [mshv-crates](https://github.com/rust-vmm/mshv) : Rust crates to interact with kernel module (/dev/mshv)
* [igvm-tooling](https://github.com/microsoft/igvm-tooling) : Tool to generate IGVM file
## IGVM
Independent Guest Virtual Machine (IGVM) file format.The format specification can be found in the igvm_defs crate, with a Rust implementation of the binary format in the igvm crate.
The IGVM file format is designed to encapsulate all information required to launch a virtual machine on any given virtualization stack, with support for different isolation technologies such as AMD SEV-SNP and Intel TDX.
At a conceptual level, this file format is a set of commands created by the tool that generated the file, used by the loader to construct the initial guest state. The file format also contains measurement information that the underlying platform will use to confirm that the file was loaded correctly and signed by the appropriate authorities.
Cloud Hypervisor can be built using igvm feature flag along with mshv and/or sev-snp. IGVM only works with MSHV.
## SEV-SNP
AMD's [Secure Encrypted Virtualization (SEV)](https://www.amd.com/en/developer/sev.html) and extensions such as Secure Nested Paging (SEV-SNP) encrypt memory and restrict access to a guest VM's memory and registers, securing it against a compromised hypervisor or VMM. They utilize the Platform Security Processor (PSP) to store keys and encrypt/decrypt the data. Microsoft has been continuously adding/improving support for SEV-SNP on Microsoft Hyper-V. Cloud-Hypervisor can be built with the sev_snp feature including mshv and igvm feature.
## Use Cases
Cloud Hypervisor can be built to run on an MSHV root partition by enabling the mshv feature, e.g.:
@@ -50,14 +50,14 @@ The examples use __socat__ `>=1.7.4` to illustrate the VSOCK functionality. Howe
### Connecting from Host to Guest
The host starts to listen on the defined port:
The guest starts to listen on the defined port:
`$ socat - VSOCK-LISTEN:1234`
Once the host is listening, the guest can send data:
Once the guest is listening, the host can send data:
`echo -e "CONNECT 1234\\nHello from host!" | socat - UNIX-CONNECT:/tmp/ch.vsock
Note the string `CONNECT <port>` prepended to the actual data. It is possible for the guest to start listening on different ports, thus the specific command is needed to instruct VSOCK to which listener the host wants to connect. It needs to be sent once per connection. Once the connection established, data transfers can take place directly.
@@ -135,7 +135,7 @@ This section illustrates the Windows specific aspects of the VM network configur
### Basic Networking
As the simplest option, using `--net tap=` in the Cloud Hypervisor command line will create a `vmtapX` device on the host with the default IPv4 adress `192.168.249.1`. After SAC becomes available, the guest configuration can be set with
As the simplest option, using `--net tap=` in the Cloud Hypervisor command line will create a `vmtapX` device on the host with the default IPv4 address `192.168.249.1`. After SAC becomes available, the guest configuration can be set with
@@ -203,13 +203,13 @@ The Windows guest debugging process relies heavily on QEMU and [socat](http://ww
The connection between both guests happens over TCP, whereby on the guest side it is automatically translated to a COM port. Because the VMs are connected through TCP, the debugging infrastructure can be distributed over the network. The serial port, while slowly transferring data, is common enough to support a wide range of cases and tools.
In this excercise, [WinDbg](https://docs.microsoft.com/en-us/windows-hardware/drivers/debugger/) is used. Any other debugger of choice with the ability to use serial connection can be used instead.
In this exercise, [WinDbg](https://docs.microsoft.com/en-us/windows-hardware/drivers/debugger/) is used. Any other debugger of choice with the ability to use serial connection can be used instead.
### Debugger and Debuggee
#### WinDbg VM
For simplicity, the debugger VM is supposed to be only running under QEMU. It will require VGA and doesn't neccessarily depend on UEFI. As an OS, it can carry any supported Windows OS where the debugger of choice can be installed. The simplest way is to follow the image preparation instructions from the previous chapter, but avoid using the OVMF firmware. It is also not required to use VirtIO drivers, whereby it might be useful in some case. Though, while creating the image file for the debugger VM, be sure to choose a sufficient disk size that counts in the need to save the corresponding debug symbols and sources.
For simplicity, the debugger VM is supposed to be only running under QEMU. It will require VGA and doesn't necessarily depend on UEFI. As an OS, it can carry any supported Windows OS where the debugger of choice can be installed. The simplest way is to follow the image preparation instructions from the previous chapter, but avoid using the OVMF firmware. It is also not required to use VirtIO drivers, whereby it might be useful in some case. Though, while creating the image file for the debugger VM, be sure to choose a sufficient disk size that counts in the need to save the corresponding debug symbols and sources.
To create the debugger Windows VM, the following command can be used:
@@ -244,7 +244,7 @@ This will configure the debugging to be enabled and instruct to use the serial p
bcdedit /dbgsettings serial debugport:1 baudrate:115200
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
