Removes the C implementation of genprotimg and use the Rust
implementation instead.
Adapt the README.md accordingly.
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add support for enabling/disabling the backup keys and HMAC-PCKMO key
encryption function plaintext control flags in the Secure Execution
header.
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add metadata about the image to the Secure Execution image. This helps
to identify where the Secure Execution header is located in the image
and therefore it's less prone to errors to locate the header.
This patch adds the support for it to 'pvimg' as well as to the
'pvsecret' and 'pvattest' tools.
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add a new tool called 'pvimg' that can be used to create and inspect
Secure Execution images. It has several subcommands:
+ create: create an IBM Secure Execution image (genprotimg compatible
sytnax) and C-'genprotimg' is going to be replaced by a
symlink to this subcommand.
+ test: test various aspects of an existing Secure Execution image
+ info: print information about an existing Secure Execution
image (experimental API!)
+ version: print version and exit
As mentioned above, the 'genprotimg' tool is now a symbolic link to the
'pvimg create' subcommand and the CLI is backward compatible with the
original genprotimg CLI, with the following exceptions:
- '-v' increases the verbosity instead of showing the version
- '-V' is now deprecated in favor of '-v'
- an existing output file is no longer silently overwritten, but there
is a new flag '--overwrite' to get the original behavior
- experimental options are no longer described in the help
- the commands '--cert ...' and '--root-ca' are now mutually exclusive
- to '--no-verify'
- there is now a component check, e.g. it checks if the specified
Linux kernel looks like a raw binary s390x kernel. These checks can be
disabled by using the new command line flag '--no-component-check'
Acked-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Hardcode the location and size of the BSS section of stage3a to 0xc000
and 0x1000. This change is made in preparation for storing the Secure
Execution image metadata at the address of the BSS section of stage3a.
The idea behind this is that since there is no ELF loader involved, the
stage3a loader will memset it's BSS section and therefore the Secure
Execution image metadata to 0. This way, it's avoided having any
leftover metadata after running the stage3a loader.
In addition, add .bss.* as input sections for the .bss section.
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This change is done in preparation for the Rust port of genprotimg.
While at it, format the code using `clang-format`.
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The new Rust port of genprotimg will have the name 'pvimg' as it has
more functionalities than the original genprotimg tool. As preparation
add a Secure Execution header library and an example how to use it. The
example can be used by the KVM-Unit-Tests for creating the Secure
Execution headers needed by the tests [1].
[1] See dc4f7106f3
more information how to use.
Acked-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
A manpage auto-generation tool can use this trait to get the exit codes
and their documentation of a program.
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Refactor `seek_se_hdr_start` so it can be reused. While at it, improve
the documentation of it and format the code.
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Command used:
$ cargo +nightly clippy
...
warning: doc list item without indentation
--> pvapconfig/src/ap.rs:71:5
|
71 | /// This may take some time and even loop forever if there
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Fix the ordering of the parameters in 'TryFrom<Confidential<Vec<u8> for
Confidential<[u8; N>'. While at it, convert 'LengthMismatch' error to a
named struct.
Fixes: 7608cf2de4 ("rust/confidential: Add `From` and `Into` for confidential byes arrays/vectors")
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This fixes the following error:
$ make CROSS_COMPILE=s390x-linux-gnu- HOST_ARCH=s390x
../../../common.mak:117: *** Please specify CROSS_COMPILE=... and try it again!. Stop.
$ make --version
GNU Make 4.4.1
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add column 'UTIL DATA' that indicates the percentage of channel-path
data bandwidth currently in use. Since channel-paths are bidirectional,
this column represents the maximum of read or write bandwidth
utilization.
Also use this new column in place of 'UTIL BUS' for CMG 4 and 5 default
views since the bus utilization no longer provides a relevant value for
DPU-based channel-path types.
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reviewed-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
New machine models introduce CHPIDs with two new CMG types 4 and 5.
Add support for decoding the associated channel-measurement data.
Reviewed-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Newer kernels provide the full, unfiltered Channel-Measurements
Characteristics Block (CMCB) via a new sysfs attribute named
"measurement_chars_full".
Add support for reading the full CMCB data if available in preparation
of new tool functions that will make use of this data.
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reviewed-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The utilization visualization column does not provide meaningful data
when using structured output. Omit it when an output format has been
specified on the command line.
Reviewed-by: Mete Durlu <meted@linux.ibm.com>
Signed-off-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Introduce a new command line flag ("--format") to specify the output
format in batch mode. Valid options are "pairs" for shell-compatible key
value pairs, "csv" for CSV, "json" for a formatted JSON document, and
"json-seq" for a stream of JSON text sequences as per RFC7464[1].
[1]: https://datatracker.ietf.org/doc/html/rfc7464
Note: Specifying the --format flag implies the --batch_mode flag.
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Mete Durlu <meted@linux.ibm.com>
Signed-off-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The separator line is written as part of the input processing step and
is better be moved to the place where the table is actually written.
Same goes for the terminating '\n' which is performed as the final step
while updating the terminal in batch mode.
While at it, use the designated print functions over raw printf().
Reviewed-by: Mete Durlu <meted@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
For structured output (i.e. JSON), some type information of the columns
is required, at least the ability to distinguish values that are strings
and possibly need to be quoted. Unfortunately at the time column values
are formatted this information is lost.
The column types are specified implicitly during the unit conversion of
the raw value. For example, online time is stored as a u64 value but is
converted into a "d:h:m" string.
Introduce a private flag per column that signifies if that column is to
be formatted as a string. This flag will be set in the appropriate unit
conversion function.
Reviewed-by: Mete Durlu <meted@linux.ibm.com>
Signed-off-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This type helps to perform atomic operations by writing to a temporary
file and renaming it to the actual filename when the
`AtomicFile::finish` function is called. If the `AtomicFile::finish`
function is never called, the temporary file is automatically removed
when it goes out of scope. It utilizes the `renameat2` [1] libc function
and its semantics.
[1] https://man7.org/linux/man-pages/man2/renameat.2.html
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Rename "Authenticated Encryption with Associated Data" (AEAD)
encryption/decryption functions and change the result type. This makes
the functions easier extendable. In addition, it's now possible to use
the functions as following:
`encrypt(decrypt(data)) == decrypt(encrypt(data) == data`
Add more AES and SHA related constants and use them whenever possible.
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Rename `Aes256*` to `Aes256Gcm*` and add a deprecated constant with the
old name for backward compatibility. Adapt existing code to use the new
enum variant.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Combine linker scripts for single volume and multi-volume ECKD dumpers
to avoid duplicating. Use C preprocessor to define conditional symbols.
Cleanup the generic stage2 linker script(stage2.lds). Since it is still
used for FBA and TAPE dumpers (fba2dump and tape2dump) the .stage2dump.tail
section should be preserved.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Move MVDUMP_TOOL_SIZE contsant to loaders_layout.h and rename it
to STAGE2_DUMPER_SIZE_MV.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Write the secret metadata into the same directory as the generated
secret request. Before, the metadata was accidentally written into the
working directory.
Fixes: dd82c26f87 ("rust: Add tool to manage UV-secrets")
Suggested-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Check if the SE-guests machine firmware is in an IBM approved state.
The machine firmware version can be obtained via setting a flag in the
attestation request.
The opaque 320 byte value from firmware is forwarded to an IBM server
that verifies the firmware value and confirms if the machine is in an
IBM approved firmware state.
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
