An online CCW device, which is available and not defunct and not failed,
can have an undesired fc_host port_state, which is not Online and does not
have the special case Linkdown. Indicate such unexpected state.
Complements
v2.9.0 commit 4036e80b26 ("lszfcp: add new output marker for non-good FCP
devices (hosts)")
v2.9.0 commit be7b854969 ("lszfcp: also mark FCP devices (hosts) that are
not available")
v2.18.0 commit 45e3f016f4 ("lszfcp: add linkdown case to host marker of
extended output")
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Switch from atoi() to existing parse_int() helper function for parsing
the integer --cmg argument to better handle invalid values such as
numbers followed by an unsupported suffix (e.g. 1x).
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
At the moment the memory range of processed vmdump always corresponds to
the highest defined byte (q v storage) obtained from Address Space
Information Block ignoring memory ranges specified in CP vmdump command.
This might lead to the invalid dump size calculation upon conversion to
s390 format.
Use Requested Range Table from ASIZBK to identify actual memory ranges
being dumped. Consider the end of the highest memory range as a vmdump
upper limit (dump memory size). In case no range table entries present
fall back to the original method using 'storage_size_def_store' value.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
This patch adds support for zipl targets over partitions of md-devices.
With this patch it is possible to specify a zipl target over any
partition of an md-device, so that all the physical disks participating
in the mirrored setup will be prepared for IPL.
Unlike a whole md-device which has major number 9, its partitions
have major numbers 259 and the driver name is identified as 'blkext'
in '/proc/devices'. Handle this case in set_driver_name(): call ioctl()
to make sure that device is an md-partition.
Drop re-definition of some macros.
Signed-off-by: Eduard Shishkin <edward6@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Add "zhypinfo" as an overview on Hypervisor structure in runtime.out
Get an overview of all block devices in front of the detailed outputs
using "lsblk" into runtime.out
Starting OpenSSL3.0 "openssl engine" is deprecated and needs replacement by:
"openssl list --providers" (keep "engine" for older versions)
Suggested-by: Christian Rund <Christian.Rund@de.ibm.com>
Reviewed-by: Mario Held <mario.held@de.ibm.com>
Signed-off-by: Joern Siglen <siglen@de.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Define and set the minimal supported Rust version (MSRV) to 1.75.0. This
is the (current) minimal supported version over all supported distros
that use rust in s390-tools.
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
String is more or less a Vec<u8> with some extra invariants (i.e. only
UFF-8 chars). Zeroroize is implemented by calling the Vec<u8>
implementation. The zero byte is a valid UTF-8 symbol. The String
invariant is uphold by the clearing code.
Also, implement a into_inner function for clone-able inner types.
This allows converting confidential types into no-confidential types.
As Drop is implemented this requires a clone (see E0509).
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Generalize the `Confidential` impl over Vec<T> and [COUNT; T] instead of
specializing T to u8.
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Migrate Confidential to pv_core crate. This has no impact on the public
API of pv as the migrated symbols are reexported.
This enables pv_core to manage confidential data as well.
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
The size of an EC-secp521r1 signature can be up to 139 bytes (if ASN1
encoded). There is no lower bound, although sizes lower than 137 are
very unlikely but possible.
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
The new cpacfinfo command provides information about CPACF, such as which CPACF functions are installed, and make use of the new MSA 13 Query Authentication Information function.
Signed-off-by: Finn Callies <fcallies@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Add extra trace logs for vmdump processing.
Log number of Index Pages, Bit-Key Pages and actual stored pages in the
vmdump.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add a new format option to HexSlice to print every byte with a separated
space in between. Additionally the old format option 'alternate'
together with the new one results in another new format which prints
every byte separated by a space AND every byte has a leading '0x'.
Signed-off-by: Finn Callies <fcallies@linux.ibm.com>
Co-developed-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
It's uncommon and prone to error to silently stop decoding/parsing a
hex-string if there is an invalid character. Therefore, add a new
function `decode_hex` which fixes this behavior and use it in the code.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Make it possible to convert internal key format to OpenSSL public key
format and vice versa. E.g. this can be useful when reading UV data
structures.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This makes it possible to reuse the constant. In addition, change the
type from i32 to usize since the value describes a size.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The size of an AES key depends on the mode of operation, so add this
information at least in the comments, as the API cannot be changed as it
is already published.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Use Self instead of the struct name whenever possible.
Automagically replace struct name with Self:
`cargo clippy --fix -- -W clippy::use_self`
This streamlines the code.
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
When a queue is removed from a SE guest which was in a state other
than "usable" (for example "unbound") the state displayed by lszcrypt
switches to "usable" until the queue device is finally removed by the
AP bus scan running every 30s.
This intermediate state is caused by reading 0x00000000 on the
underlying /sys/devices/cardxx/xx.yyyy/ap_functions. lszcrypt only
extracts the BS bits from this value and maps these both bits to
string output
0: "usable"
1: "bound"
2: "unbound"
3: "illicit"
totally ignoring the fact that there is no AP function at all.
Now the code checks for a valid ap_functions value first, before
actually extracting and displaying the SE state. In case the
ap_functions reads as 0x00000000 lszcrypt now displays the string
"invalid".
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
According to vmdump format, each bit of the Index page represents a Bit-Key
page and indicates if that Bit-Key page exists.
Due to the bug in vmdump64big_init() only 4096 bits of the Index Page were
processed instead of 32768. Thus for vmdumps of guests with defined storage
above 64G we could have invalid memory_start_record calculated. This ruins
the VMDUMP mem chunk read callback function.
One of the problem symptoms reported was missing UTS data in
'zgetdump -i' output caused by inability to locate OS_INFO in the dump.
Fixes: 067dd5c7ef ("zdump: Add vmdump dfi for vmdump format to elf format")
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Reviewed-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Newer rust std libary code checks if a fd is already closes and panics.
Test code created a file with fd=17 and relied that test code never
touched the file. This cannot be done anymore. Just use the working dir
as backing file.
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
`sizeof` was added into the prelude in rustc 1.80.
This triggers a lint-warning for `unused_qualifications` if rustc 1.80+
is used. Fix this warning by using a use statement to stay compatible
for <1.80.
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The RCs 30, 31, 32 may be caused by a malicious host or host bug.
Make this clear and advise to stop the SE-guest.
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
When checking CDL formatted DASD for installed dump-tool (zgetdump -d),
we might stumble upon an 'empty' boot record pointer in the volume label
filled with bytes of 0x40 (EBCDIC spaces). This leads to the following
seek error reported:
# zgetdump -d /dev/dasdb
zgetdump: Could not seek "/dev/dasdb" (Invalid argument)
Check for empty boot record and return proper error code by
ngdump_get_eckd_part_num() in order to end up with a regular
"No dump tool found" message.
Fixes: f3bcd94524 ("zdump: Add zgetdump -d support for ECKD ldipl-dump")
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This fixes a segfault when the option '--dry-run' is specified for
device-based dumps (for which the bootmap file is created on a RAW
device, not formatted with a file system).
The actual status is that the option '--dry-run' for device-based
dumps is not implemented. The implementation is evaluated as not
trivial: In contrast with filesystem-based dumps, it is not possible
to simply make do with rename/unlink of temporary created bootmap.
The fixup returns error on any not file system based dumps being
created with the option '--dry-run'.
Signed-off-by: Eduard Shishkin <edward6@linux.ibm.com>
Reviewed-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Drop a pair of duplicated assignmets
Replace the parameter 'struct job_data' with 'struct job_dump_data'
Signed-off-by: Eduard Shishkin <edward6@linux.ibm.com>
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Move all checks from check_dump_device_late() to disk_is_approproate()
and drop check_dump_device_late() entirely
Signed-off-by: Eduard Shishkin <edward6@linux.ibm.com>
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
In the function check_dump_device_late() drop the case of
(info->device != target_info->device) which never happens. Indeed,
the @info created in check_dump_device_late() coincides with the
@target_info previously created by
prepare_build_program_table_{file, device}.
Signed-off-by: Eduard Shishkin <edward6@linux.ibm.com>
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Since the following kernel commit:
"32db401965f1 s390/mm: Pin identity mapping base to zero"
we can have zero identity_base value in os_info. This makes zgetdump
check for non-VR kernel in vm_info_get() incorrect what leads to missing
data (e.g. UTS kernel version) in 'zgetdump -i' output.
Check for zero kaslr_offset value instead (like crash and makedumpfile
do) in order to identify non-VR kernel.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Since memory chunks can overlap for vr-kernel dumps stored in elf
format (ngdump, zfcpdump), we need to consider this when converting to
s390 dump output format. For that sort DFI memory chunks by start
address and adjust dfo_s390 logic for identifying memory gaps.
Otherwise we might end up with bogus DFO memory chunks being created.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
On vertical polarization, kernel can be adjusting CPU capacities
dynamically, and cpuplugd can interfere this with hotplug operations
causing performance degradation. To prevent this, check if system has
switched its polarization state, and act accordingly.
If system is on vertical polarization when daemon starts, no CPU hotplug
action is triggered. If system changes to vertical polarization during
daemon runtime, revert cpuhotplug adjustments and stop further CPU
hotplug actions. If system switches back to horizontal polarization
during runtime of the daemon, start evaluating CPU hotplug rules and
trigger adjustments.
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Simplify the cpu management parts of cpuplugd code by introducing
functions from libutil and rework some logic to drop some assumptions
about how kernel assigns cpuids.
Right now cpuplugd assumes that the cpuids are always sequential and
there are no gaps in between, however kernel does not guarantee that.
Make cpuplugd compliant by traversing cpu sysfs entries instead.
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This fixes c0f02d2f6 which results in problems when preparing qcow2
images for IPL:
zipl -V --blsdir /tmp/tmp.kdPooQjoBh/boot//loader/entries/ --config /
Program terminated with signal SIGFPE, Arithmetic exception.
Don't use pointer to not initialized struct disk_info after failed
auto-detection of disk parameters. Make the check that the file
locates on the disk in the form of a separate procedure.
Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Eduard Shishkin <edward6@linux.ibm.com>
Acked-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Tested-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
When detecting disk type, the function disk_get_info() is called.
It can fail for various reasons (e.g. when the logial target is not
eligible for boot record installation).
Once disk_get_info() fails, don't proceed with type detection.
Return error instead. When applicable, mark the dump job with
"is_ngdump" flag to avoid extra type detection calls.
Acked-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Signed-off-by: Eduard Shishkin <edward6@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This fixes d6b702d57 which introduces a problem: SCSI dump
installation fails:
zipl -V -d /dev/mapper/mpathd1
Error: Invalid dump device: Could not read partition table
The reasons:
1) Wrong (logical) device is passed as a target base;
2) In case of 'source_script' the check to make sure that specified
target is over a partition isn't applicable any more after zipl
support of complex logical targets (e.g. mirrors).
The fixup passes the physical device as a target base (instead of
the logical one). Also the fixup removes invalid check from
check_dump_device_late() and instead adds a more generic check to
the helper script that data starts beyong the boot area.
Reported-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Eduard Shishkin <edward6@linux.ibm.com>
Tested-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This option is experimental, but can still be useful.
While at it, sort the options alphabetically.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This fixes 670bf3e8 which actually isn't an equivalent refactoring.
The generic dm-device resolution procedure was modified to not resolve
the topmost dm-device in the path. So that any calles who don't expect
it, should complete the resolutioin process by themselves. In case of
chreipl_helper such completion was missed. chreipl(8) utility doesn't
expect dm-devices at the output of chreipl_helper.device-mapper
Example:
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 20G 0 disk
|-sda1 8:1 0 20G 0 part
`-mpathb 253:0 0 20G 0 mpath
`-mpathb1 253:2 0 20G 0 part /
sdb 8:16 0 20G 0 disk
|-sdb1 8:17 0 20G 0 part
`-mpathb 253:0 0 20G 0 mpath
`-mpathb1 253:2 0 20G 0 part /
Expected result:
8:16
Actual result:
253:0
As a result, the chreipl(8) "node" option stopped working.
The fixup adds the completion.
Reported-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Eduard Shishkin <edward6@linux.ibm.com>
Tested-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
