New options:
--accelonly
--ccaonly
--ep11only
which restrict the output to only cards/queues with the given mode.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Newer kernel show a sysfs attribute chkstop which displays
the checkstop state of a crypto card. This patch enables
support for lszcrypt to display the checkstop state.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
If there is a max_msg_size attribute for the card
the lszcrypt -c option will show this limit as
AP bus max message size limit xx Kb
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
On several distributions `pandoc` is not available via the default
repositories, and thus not available in the build environments for the
distribution packages. That means, the man page can't be bundled along
with the packages generated for those distributions.
But since this is a valuable asset for some users, instead of requiring
`pandoc` in order to have a man page be generated during the build, so it
can be installed, bundle a pre-cooked version that corresponds to the
current version of the `README.md` file. This way, the man page can always
be packaged, and is now always installed, even if `ENABLE_DOC` is set to
`0` (the default).
This also means, whenever the `README.md` file is changed, the bundled
man page needs to be regenerated, so it stays in sync. As a safeguard
we also add a checksum of the `README.md` file that is regenerated along
with the man page. This checksum is tested even when `pandoc` is not
available, and the user is notified whenever it runs out of sync (with a
hint as to how to remedy it).
Nothing changes for the compile/installation workflow, if `ENABLE_DOC` is
set to `1`.
Suggested-by: Jens Remus <jremus@linux.ibm.com>
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Sometimes dumping a virtual machine from the outside is the only way to
get the data that is needed. This can be the case if a dumping mechanism
like kdump hasn't been configured or data needs to be fetched at a
specific point. Dumping a protected guest from the outside without help
from FW/HW doesn't yield sufficient data to be useful. Hence we now
introduce Protected Virtualization (PV) dump support.
The PV dump support works by integrating the firmware into the dump
process. New Ultravisor calls are used to initiate the dump process,
dump cpu data, dump memory state and lastly complete the dump process.
The guest's data is fully encrypted and can only be decrypted by the
entity that owns the customer communication key for the dumped guest.
Also dumping needs to be allowed via a flag in the SE header.
This patch adds support for PV guest dumps to genprotimg. To prepare a
PV image in order that the PV guest can later be dumped from the
outside, the user has to provide a customer communication key used for
the dump process and he has to set the corresponding control flag. For
specifying the customer communication key a new command line option
`--comm-key` is added and for enabling/disabling the control flag the
command line options `--enable-dump` and `--disable-dump` are added.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Acked-by: Viktor Mihajlovski <mihajlov@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Declare `--enable-pckmo` and `--disable-pckmo` as mutually exclusive.
Let's define a helper macro for this which allows an easier definition
of mutually exclusive command line flags.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Introduce a private macro for the calculation of the control flags and
sort the flags by bit value.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Debian carried a patch forever that allowed zipl to run even if not all
menu items had files attached. If a required file is missing for an
entry (e.g. vmlinuz.old or initrd.img.old) and it is marked as
"optional" in the config, the section will be skipped. This allows
zipl to install after bootstrapping, as booting on s390 still relies
on the kernel/initrd symlinks in the root directory.
Closes: https://github.com/ibm-s390-linux/s390-tools/pull/2
Signed-off-by: Philipp Kern <pkern@debian.org>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
[sth@linux.ibm.com: adapted patches to latest changes, merged patches]
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This commit makes zgetdump work with /dev/mem again.
zg_seek() should not attempt to verify the given offset for devices before
issuing lseek() because special devices like /dev/mem report 0 in
stat.sb_size.
$ zgetdump -i /dev/mem
zgetdump: Trying to seek past file end "/dev/mem"
Fixes: 11e78cada5 ("zdump: catch attempts to seek past end of file in zg_seek()")
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This change will group the commands executed for block and scsi devices
into a section with a comment.
By grouping, we intend to enhance the handling in our runtime.out file
and help to understand the purpose of command groups.
In addition we did get feedback for promoting some commands to the top.
Signed-off-by: Joern Siglen <siglen@de.ibm.com>
Reviewed-by: Sa Liu <saliu@de.ibm.com>
Reviewed-by: Mario Held <mario.held@de.ibm.com>
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This change will group the commands executed for Z device subsystem
into a section with a comment.
By grouping, we try to enhance the handling in our runtime.out file and
help to understand the purpose of command groups.
In addition we did get feedback for promoting some commands to the top.
lspci -t was added on request of SMEs during the discussions
Signed-off-by: Joern Siglen <siglen@de.ibm.com>
Reviewed-by: Sa Liu <saliu@de.ibm.com>
Reviewed-by: Mario Held <mario.held@de.ibm.com>
Acked-by: Nicklas Schnelle <Niklas.Schnelle@ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This change will group the commands executed for overall state into a
first section with a comment.
By grouping, we intend to enhance the handling in our runtime.out file
and help to understand the purpose of command groups.
In addition we did get feedback for promoting some commands to the top.
Signed-off-by: Joern Siglen <siglen@de.ibm.com>
Reviewed-by: Sa Liu <saliu@de.ibm.com>
Reviewed-by: Mario Held <mario.held@de.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This change will group the commands executed for crypto, special SW or
specific for a distro into sections with a comment.
By grouping, we intend to enhance the handling in our runtime.out file
and help to understand the purpose of command groups.
Signed-off-by: Joern Siglen <siglen@de.ibm.com>
Reviewed-by: Sa Liu <saliu@de.ibm.com>
Reviewed-by: Mario Held <mario.held@de.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This change will group the commands with long output into two
sections with a comment.
By grouping, we intend to enhance the handling in our runtime.out file
and help to understand the purpose of command groups.
We did get feedback for moveing some independent long output files to
the end for speed up the scrolling in the upper parts.
Files which already have a separate output file are bundled in a
separate group at the end.
Signed-off-by: Joern Siglen <siglen@de.ibm.com>
Reviewed-by: Sa Liu <saliu@de.ibm.com>
Reviewed-by: Mario Held <mario.held@de.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This change will regroup & reorder the commands executed for network.
By grouping, we intend to enhance the handling in our runtime.out file
and help to understand the purpose of command groups.
In addition we did get feedback for promoting some commands to the top.
"ip -br a" was added on request of SMEs during the discussions
Signed-off-by: Joern Siglen <siglen@de.ibm.com>
Reviewed-by: Sa Liu <saliu@de.ibm.com>
Reviewed-by: Mario Held <mario.held@de.ibm.com>
Acked-by: Sandy Winter <WINTERA@de.ibm.com>
Acked-by: Stefan Raspl <stefan.raspl@de.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
When lshwc is invoked with
# ./lshwc -a :P
lshwc: ioctl S390_HWCTR_START: Invalid argument
#
it returns an error instead of listing all problem state counters
of all online CPUs. The reason is an empty CPU list when it is
omitted and only a counter set is specified. Fix this.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
With the introduction of libcpumf/libcpumf.a library there is no need
for this file anymore. Its defines have been moved to
include/lib/libcpumf.h are obsolete.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add a function to detect the existence of the CPU Measurement Sampling
Facility on a system.
Add a function which extracts the CPU Measurement Sampling Facility
characteristics on a system, such as
- minimum sample speed
- maximum sample speed
- current CPU speed
- basic sample size in bytes
- diagnostic sample size in bytes
Add a function to detect the existence of the CPU Measurement Sampling
Facility on a system and return the current sampling buffer management
characteristics, such as:
- minimum supported sampling buffer size
- maximum supported sampling buffer size
Add a function to detect the existence of the CPU Measurement Counting
Facility on a system.
Add a function which extracts the CPU Measurement Counting Facility
characteristics on a system, such as
- counter first version number
- counter second version number
- counter set authorization level
Add a function the returm the PMU type number of a CPU Measurement
Facility device driver. These numbers may vary between boots.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
'which' tool is packaged separately from other core tools and there will
likely be scenarios where this check will fail because 'which' is
unavailable.
The "type" is builtin itself and should solve this problem.
For a built in command, we will not suppress error out -> removing 2>&1.
On this replace - in call_run_command - get cmd_type as variable only once
Reported by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Joern Siglen <siglen@de.ibm.com>
Reviewed-by: Mario Held <mario.held@de.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
a missing dump2tar command did show misleading error messages
now check it and give clear messages
Signed-off-by: Joern Siglen <siglen@de.ibm.com>
Reviewed-by: Mario Held <mario.held@de.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
as order itself does not matter for collection of log and config files,
we decided to use alphabetic order for better maintenance
Signed-off-by: Joern Siglen <siglen@de.ibm.com>
Reviewed-by: Mario Held <mario.held@de.ibm.com>
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
critical paths in dump2tar data collection have been already excluded -
this update will sync the excludes in the fall back, running in case
dump2tar is missing or failing on a system
By this we also sync the filtering to match exact the same pattern.
Reported by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Joern Siglen <siglen@de.ibm.com>
Reviewed-by: Sa Liu <saliu@de.ibm.com>
Fixes: 12c84469fd ("dbginfo.sh: exclude reading page_idle/bitmap sysfs
attribute")
Fixes: b627b8d8e1 ("Initial s390-tools-2.0.0 import")
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
adopt all indents to have the same setting overall - NO logic changes !
tooling: vim used with setting "shiftwidth=8",expandtab,autoindent
commands "gg=G",":retab"
some additional line brakes to stay below 100 chars
and one line added manual before "collect_procfs"
Signed-off-by: Joern Siglen <siglen@de.ibm.com>
Reviewed-by: Mario Held <mario.held@de.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
chzdev fails to generate correct cio_ignore udev-rules for a CCW device
with device number 0xffff. Also chzdev aborts due to a segmentation
fault when a CCW device with CSSID 0xff is configured. Both issues are
caused by off-by-one errors while interpreting CCW device ID limits
CSSID_MAX, SSID_MAX and DEVNO_MAX.
Fix these errors by correctly interpreting CCW device ID limits.
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The endianness handling is already done before, so there is no need for
this function. Let's remove the useless `uint64_to_uint8_buf` function.
Suggested-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Currently, a device type setting being --removed from both the active and
persistent configuration via 'chzdev -t' can result in a scenario where
the setting is not removed from the active configuration (and an error
message is presented) but chzdev still proceeds to remove the setting from
the persistent configuration.
Update this logic so that devtype_remove_settings behaves the same way as
device_remove_settings and only perform the removal when no errors are
encountered.
Reported-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Jason J. Herne <jjherne@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Extend cpictl to report Linux distribution type and version information,
and another sublevel of Linux kernel version data via the system level
field of the SCLP CPI firmware interface. This data is intended to be
decoded by the IBM Z HMC web-UI to provide users a more detailed view of
Linux software levels installed in LPARs.
For this purpose, the format of the 64-bit system level word is extended
in a compatible way, that is, the meaning of existing fields remains
unchanged while additional data is added to previously unused fields.
The new format is defined as 0xabccddeeeeffgghh, where:
- a=statistics flags
- b=distro id
- c=distro major version
- d=distro minor version(s)
- e=kernel sublevel 2
- f=kernel version
- g=kernel patchlevel
- h=kernel sublevel 1
This format will be automatically reported for supported distributions
based on data from /etc/os-release. As before, users can override the
data by specifying a custom system level word in /etc/sysconfig/cpi.
To support manual specification of new data fields, the format of
cpictl's -L command line option and the CPI_SYSTEM_LEVEL environment
variable are extended as follows:
- 0x<level>
Specifies the system level as 64 bit hex value
- [[[flags:]distro_id:distro_version:]kernel_version]
Specifies the system level as list of optional fields. Any field that
is omitted is initialized with automatically determined values.
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Acked-by: Viktor Mihajlovski <mihajlov@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
In the past s390 used a fixed command line length of 896 bytes. This has
changed with newer Linux kernels. There is now a parm area indicating
the maximum command line size. This parm area has always been
initialized to zero, so with old kernels this field would read zero and
we must then assume that only 896 bytes are available.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
EditorConfig (https://editorconfig.org/) defines a file format for
defining coding styles. The most common editor do either provide native
support or via plugin support for EditorConfig.
This patch adds an EditorConfig configuration for s390-tools.
Acked-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
zdev provides path resolution logic to determine which z-specific
devices contribute to the file system mounted at a specific mount point.
This logic is used by command-line option --by-path, but also to
determine the list of devices needed to enable the root file system.
Path resolution fails when a device provides multiple mount points such
as, for example, when using btrfs subvolumes, or when mounting the same
file system at multiple mount points. The failure is caused by zdev
relying on the MOUNTPOINT attribute of lsblk's output which only
contains a single mount point.
Fix this by making use of lsblk's MOUNTPOINTS attribute that contains
the full list of mount points. Note that MOUNTPOINTS was only introduced
with util-linux v2.37, therefore a fall-back to the old format is
needed.
Fixes: https://github.com/ibm-s390-linux/s390-tools/issues/129
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Eduard Shishkin <edward6@linux.ibm.com>
Reported-by: Dan Horák <dan@danny.cz>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
lshwc allows to specify a list of CPUs, for example
# ./lshwc -a 2-3,66-68:b
Date,Time,CPU,CPU_CYCLES(0),INSTRUCTIONS(1),L1I_DIR_WRITES(2),....
2022-01-21,12:51:54,CPU2,68762,20999,283,14157,601,87255
2022-01-21,12:51:54,CPU3,70514,21179,288,10654,586,90188
2022-01-21,12:51:54,CPU4,48504,21018,141,7831,438,78494
2022-01-21,12:51:54,Total,187780,63196,712,32642,1625,255937
#
However, as seen on the output, the CPU list is incorrect. It shows
CPUs 2, 3 and 4 even when only CPU 2 and 3 was requested. CPUs 66, 67
and 68 have not been online and can not be displayed.
What happens is a wrong parameter conversion for the device driver.
CPUs 66, 67 and 68 are passed to the device driver as CPUs 2 3 and 4
and that data is returned.
Fix this and submit a CPU list with correct bit ordering:
# ./lshwc -a 2-3,66-68:b
Date,Time,CPU,CPU_CYCLES(0),INSTRUCTIONS(1),L1I_DIR_WRITES(2),...
2022-01-21,12:59:18,CPU2,50753,18042,246,10972,494,60345
2022-01-21,12:59:18,CPU3,54002,20390,232,9219,511,66033
2022-01-21,12:59:18,Total,104755,38432,478,20191,1005,126378
#
Reported-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Fix Sparse findings like:
warning: symbol 'hash_table_find' was not declared. Should it be static?
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Since version 2.37.x, with the commit 58b510e58 ("libsmartcols: sanitize
variable names on export output"), util-linux changes the output
characters of lsblk, where the ":" is replaced with an "_". Align the
lsblk output parser function in lszdev as per this change.
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Suggested-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reported-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Tested-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add a prophylactic check that @filename is not NULL before its
dereference.
This addresses the following warning (which is a false positive,
since stat(2) is never called with NULL file name):
job.c:514:13: warning: argument 1 null where non-null expected
[-Wnonnull]
514 | if (stat(filename, &stats)) {
| ^~~~~~~~~~~~~~~~~~~~~~
In file included from /usr/include/features.h:488,
from /usr/include/errno.h:25,
from job.c:13:
job.c: In function 'check_job_ipl_data':
/usr/include/sys/stat.h:227:12: note: in a call to function
'stat' declared 'nonnull'
227 | extern int __REDIRECT_NTH (stat, (const char *__restrict __file,
Fixes: https://github.com/ibm-s390-linux/s390-tools/issues/127
Reported-by: Mario Held <mario.held@de.ibm.com>
Signed-off-by: Eduard Shishkin <edward6@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Under certain conditions, e.g. in a KVM guest, a write operation
to /sys/firmware/cpi/set can result in an error message to
stderr while the script returns with a zero exit code, indicating
success.
This can cause confusion if cpictl is called by systemd due to
the existence of a writable /sys/firmware/cpi/. Let's silence
cpictl when writing to the /sys/firmware/cpi/set. This is OK, as
nothing can be inferred from failure or success from the perspective
of the invoking Linux instance.
Fixes: https://github.com/ibm-s390-linux/s390-tools/issues/120
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The maximum command line length is now dependent on the kernel image
that is loaded. Therefore move the check to check_common_ipl_data().
This function now reads the new kernel image, and check whether the
command line length is in the allowed range.
The command line size limit in zipl is now set to 64k, which is hopefully
enough.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
There are two places where we check whether the initrd and kernel image
is readably. Add one helper function that checks this. This is also a
preparation for the extended command line handling, so that we have to
add that code in only one location.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
