Auto-configuration is the name of a new configuration target that is
supported by chzdev and lszdev besides the existing active and
persistent configuration targets. Directives created in this new
configuration are stored as udev rules in the /run/udev/rules.d
directory.
Auto-configuration directives are only in effect if there are no
directives for the same device in the user-provided persistent
configuration. This allows users to override auto-configuration
directives if necessary.
Due to the volatile nature of the /run directory, auto-configuration
directives are cleared on reboot. Therefore mechanisms that generate
auto-configuration directives must recreate them on every boot.
The lszdev tool displays auto-configuration data both in list view
as well as in detail view. Users can specify the new option --auto-conf
to only show data from this configuration target.
Mechanisms that generate automated configuration directives can use
chzdev together with the --auto-conf option to create the corresponding
udev rules.
Note: This change does not include a mechanism that generates
auto-configuration directives.
Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Change chzdev's udev rule generation from the previous approach of
combining all zfcp-lun udev rules associated with an FCP device into a
single file to storing zfcp-lun udev rules in one file per zfcp-lun.
This is done to enable per-device udev rule masking.
With udev rule masking, if a udev rule file by the same name exists in
both /etc and /run, the udev daemon will only consider the rules found
in /etc.
The auto-configuration feature will make use of per-device udev rule
masking to introduce a new class of configuration data (stored in /run)
that is only active if no user-provided configuration data (in /etc)
exists.
In addition, change chzdev to allow the regeneration of udev rules by
using the --force command line like in the following example:
# chzdev zfcp-lun --configured --enable --persistent --force
This can be used to convert all existing zfcp-lun udev rules from the
old format to the new one.
Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
There are some situations where running "udevadm settle" can result in
a deadlock, such as in the early stages of initial RAM-disk processing.
Introduce a new command-line option --no-settle that can be used to
suppress calling "udevadm settle" to allow chzdev to be run in such
situations.
Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add support for reading firmware-provided I/O configuration data files.
Such configuration files are generated by the Dynamic Partition Manager
and made available via a kernel interface for consumption by Linux.
To read a firmware configuration file, use the existing --import option:
# chzdev --import /sys/firmware/sclp_sd/config/data
This will apply all I/O configuration data found in the specified file
to the persistent configuration.
Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Apply some changes to existing functions and data structures to simplify
the firmware configuration file support implementation.
- Make qeth and dasd subtype objects non-static
- Change the existing helper functions for reading file contents into
memory to also support binary functions
- Move some configuration file import functions to make them available
for use in other source files
Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The udev rule for SCSI devices is still using the WAIT_FOR keyword,
which was used to make sure that a file does in fact exist before any
rule is applied. That keyword, however, was removed with systemd-220 and
is therefore no longer valid, which in turn leads to errors on newer
systems.
Use the TEST keyword instead to check the existence of a file before we
apply any rules.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Create the default keystore directory '/etc/zkey/repository'
and the user group 'zkeyadm' during make install.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add new commands to the zkey utility to store secure AES keys in
the secure key repository provided by the keystore implementation
introduced in the previous commit.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add a keystore implementation that stores secure AES keys in a
key repository, located in a directory, e.g. '/etc/zkey/repository'.
The keystore allows you to generate, validate, re-encipher, modify,
list, delete, etc secure keys.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
To reduce the size of the zkey.c source file, all routines that
deal with secure keys are moved to a new source file pkey.c.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Comma separated strings are used in property values to store
multiple values in one property. These helper functions allow to
work with such comma separated strings.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The integrity support for the properties file routines use
SHA-256 to build a hash of the keys and values of a property file.
The codes uses the EVP_DigestInit_ex, EVP_DigestUpdate, and
EVP_DigestFinal from the libcrypto library (OpenSSL).
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
In preparation for a new feature, introduce property file
handling routines. A property file stores key value pairs
in a text file. Optionally a hash of all keys and values
contained in the properties file can be generated to
ensure integrity of the properties file and to detect
manual modifications.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add 'Dump file size' field for zgetdump -i output to show the actual size
of dump file in s390 extended format on disk in megabytes.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add verbose option for zgetdump to display the detailed layout of memory
map when printing dump info for s390_ext or ELF dump format.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Adjust ELF formatted dump processing by zgetdump tool in order to handle
so-called zero loads using zero memory chunks introduced with s390
extended dump format.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Update zgetdump tool to process dumps of the new s390 extended format.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Update 'zgetdump -d' to process the new DASD dump tool installed (single
volume or multi-volume).
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Update df_s390_dumper structure and dumper reading functions to read
certain dumper fields instead of the entire dump tool.
Update other s390 dump common functions in preparation for the new dumper
and the new s390 extended dump format.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Adjust progress_print() function to print dump progress message based on
the time interval thus printing the message with a regular rate.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Update zipl DASD standalone dumpers for single-volume, multi-volume and FBA
to drop the sets of zero pages when dumping memory to disk. Thus, all
continuous sets of zero-megabytes in the memory are dropped during the dump
stage.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Old implementation was using Test Protection (TPROT) instruction to
validate the memory page. Given that it is a rather slow instruction and
the fact that we only need to validate the read-access for a page, we can
use simple Load or Insert Character instruction to test that.
The new version of page_is_valid() without a TPROT is introduced.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.vnet.ibm.com>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The program check handler has a bug in calculating the address of the target
to jump to. Furthermore the use of relative addresses in the exception table
can lead to situations where the (calculated) fault is not unique. Storing
the absolute address of the fault and target in the exception table solves
both problems.
This patch is intended to:
- Modify exception table to store the absolute address of 'fault' and
'target' points
- Adjust program check handler function pgm_check_handler_fn() accordingly
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.vnet.ibm.com>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
chreipl could only be used as root (effective userid 0), which is
explicitly checked upon invocation.
"access" call is a wrong method to check super user read/write access
for sysfs files, because it is simply always returns 0 (success), despite
actual sysfs file permissions or underlying sysfs file callbacks setup.
The only guaranteed way of checking sysfs file super user access is an
actual open call with the corresponding access mode.
The problem is that chreipl always tries to update some sysfs attributes
even through they are not specified as command line arguments. Together
with a broken sysfs file access checks this leads to inability to use
the tool, when some sysfs attributes are read-only (which is the case
on older systems where diag308 set does not work).
$ chreipl ccw -d 0.0.ec5a
chreipl: Could not open "reipl/ccw/parm" (Permission denied)
The change fixes access checks, which are in place to handle "diag308
set does not work" case (presence of read-only sysfs attributes).
Also replaces R_OK with F_OK in "set_target_type_auto" to underline that
only file presence is checked, not an actual read access.
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Make write_str_errno return errno in all error cases, so that it would
be usable in scenarious where open call could fail and we just want to
get an errno, not to exit.
This function is currently only used by chshut in a context where
such a change wouldn't hurt debug ability.
159 if (write_str_errno(argv[2], path))
160 ERR_EXIT_ERRNO("Could not set \"%s\"", path);
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
kdump reipl implementation relies on os_info kernel structure
residing in old memory being dumped. os_info contains reipl block, which
is used (if valid) by the kdump kernel for reipl parameters.
The problem is that the reipl block and its checksum inside
os_info is updated only when /sys/firmware/reipl/reipl_type is
written. This sets an offset of a reipl block for "reipl_type" and
re-calculates reipl block checksum. Any further alteration of values
under /sys/firmware/reipl/{reipl_type}/ without subsequent write to
/sys/firmware/reipl/reipl_type lead to incorrect os_info reipl block
checksum. In such a case kdump kernel ignores it and reboots using
default logic.
This change makes sure that all fcp values are written before
reipl_type, to avoid potential problem with incorrect checksum.
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
When dump is not complete or dump memory limit is set, zgetdump might end up
with the Segfault on reading Vector Registers. That might take place when
the Vector Registers save area is beyond the dump memory limit.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.vnet.ibm.com>
Reviewed-by: Philipp Rudo <prudo@linux.vnet.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The short descriptions for a counter in the extender counter
set should be identical for all models.
This patch fixes minor differences.
Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
double free or corruption (out)
Program received signal SIGABRT, Aborted.
0x000003fffdd40404 in raise () from /lib64/libc.so.6
(gdb) bt
#0 0x000003fffdd40404 in raise () from /lib64/libc.so.6
#1 0x000003fffdd41ec2 in abort () from /lib64/libc.so.6
#2 0x000003fffdd88d8e in __libc_message () from /lib64/libc.so.6
#3 0x000003fffdd905c8 in malloc_printerr () from /lib64/libc.so.6
#4 0x000003fffdd98dfa in free () from /lib64/libc.so.6
#5 0x0000000001005994 in util_ptr_vec_free (count=<optimized out>, ptr_vec=0x101de90) at ../include/lib/util_base.h:46
#6 util_scandir_free (de_vec=0x101de90, count=<optimized out>) at util_scandir.c:174
#7 0x00000000010043ce in print_defunct_devices (rec=rec@entry=0x10114f0,
path=path@entry=0x101cc80 "/sys/devices/css0/defunct") at lscss.c:678
#8 0x0000000001004cfe in print_subchannels_of_type (type_requested=type_requested@entry=SUBCHANNEL_TYPE_IO,
rec=rec@entry=0x10114f0) at lscss.c:726
#9 0x0000000001003888 in cmd_lscss () at lscss.c:761
#10 main (argc=<optimized out>, argv=<optimized out>) at lscss.c:932
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The cpumf_helper.in is called to parse counter definition
files stored in /usr/share/s390-tools/cpumf directory and
returns perl references to be examined by other perl tools
such as lsctrdef.
cpumf_helper.in expects several keywords in the counter
definition files, one is 'shortdesc' which contains
a short description of the purpose of the counter.
However this short description not is stored in the hash
field shortdesc keyed by counter number 'ctr' because the
wrong key is used.
Output before:
{
'64' => {
'desc' => 'Total number of the PRNG functions issued by the CPU',
'name' => 'PRNG_FUNCTIONS',
'set' => 8
},
'65' => {
'desc' => 'Total number of CPU cycles when the DEA/AES coprocessor is busy performing PRNG functions issued by the CPU',
'name' => 'PRNG_CYCLES',
'set' => 8
},
....
'ctr' => { <-------- WRONG
'shortdesc' => 'AES Blocked Cycles'
}
}
Output with this patch:
{
'64' => {
'desc' => 'Total number of the PRNG functions issued by the CPU',
'name' => 'PRNG_FUNCTIONS',
'set' => 8,
'shortdesc' => 'PRNG Functions'
},
'65' => {
'desc' => 'Total number of CPU cycles when the DEA/AES coprocessor is busy performing PRNG functions issued by the CPU',
'name' => 'PRNG_CYCLES',
'set' => 8,
'shortdesc' => 'PRNG Cycles'
},
...
}
Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
