add_time_select

bushu.conf

@@ -20,6 +20,14 @@ YEWU_DNS="192.168.46.44"
 YEWU_IFACE="yewu-peer"
 YEWU_MAC="02:aa:bb:cc:dd:01"
 
+
+# monitor VLAN 配置
+MONITOR_VLAN_ID=100
+MONITOR_PHY_IFACE="eth11"
+MONITOR_ALIAS="lsa"
+
+
+
 # -------------------
 # k3s 配置
 # -------------------
@@ -29,6 +37,29 @@ NODE_NAME="rk3588"
 NODE_IP="10.250.0.5"
 NODE_EXT_IP="10.250.0.5"
 
+
+# -----------------------
+# 时间同步配置
+# -----------------------
+
+# 是否启用 chrony：true / false
+ENABLE_CHRONY=true
+
+# 是否启用 gPTP：true / false
+ENABLE_GPTP=true
+
+# gPTP 使用的物理网卡
+GPTP_IFACE="eth11"
+
+# chrony 时间服务器
+CHRONY_SERVERS=(
+    "10.250.0.1 iburst prefer"
+    "10.250.0.2 iburst"
+    "10.250.0.3 iburst"
+)
+
+
+
 # -------------------
 # 域名解析列表 (每行一个条目)
 # 格式: "IP hostname1 hostname2 ..."

bushujb.sh

@@ -66,15 +66,6 @@ ConfigureWithoutCarrier=yes
 RequiredForOnline=no-carrier
 EOF
 
-# cloud VLAN 子接口
-# cat > /etc/systemd/network/10-monitor.netdev << EOF
-# [NetDev]
-# Name=cloud-monitor
-# Kind=vlan
-
-# [VLAN]
-# Id=$MONITOR_VLAN_ID
-# EOF
 
 cat > /etc/systemd/network/00-$CLOUD_IFACE.network << EOF
 [Match]
@@ -94,17 +85,6 @@ PVID=1
 EgressUntagged=1
 EOF
 
-# cat > /etc/systemd/network/10-monitor.network << EOF
-# # monitor
-# [Match]
-# Name=cloud-monitor
-
-# [Network]
-# ConfigureWithoutCarrier=yes
-
-# [Link]
-# RequiredForOnline=no-carrier
-# EOF
 
 echo "cloud 网桥配置已完成"
 
@@ -162,6 +142,74 @@ echo "正在重新加载网络配置..."
 networkctl reload
 echo "网络配置已生效"
 
+
+# ===================================================
+# 新增部分：monitor VLAN 子接口配置
+# ===================================================
+echo "=== 开始配置 monitor VLAN 子接口 ==="
+
+: "${MONITOR_VLAN_ID:?请在 bushu.conf 中配置 MONITOR_VLAN_ID}"
+: "${MONITOR_PHY_IFACE:?请在 bushu.conf 中配置 MONITOR_PHY_IFACE}"
+: "${MONITOR_ALIAS:=lsa}"
+
+MONITOR_VLAN_IFACE="${MONITOR_PHY_IFACE}.${MONITOR_VLAN_ID}"
+
+echo "monitor 物理网卡: ${MONITOR_PHY_IFACE}"
+echo "monitor VLAN ID: ${MONITOR_VLAN_ID}"
+echo "monitor VLAN 子接口: ${MONITOR_VLAN_IFACE}"
+echo "monitor VLAN alias: ${MONITOR_ALIAS}"
+
+modprobe 8021q || true
+
+if ip link show "${MONITOR_VLAN_IFACE}" >/dev/null 2>&1; then
+    echo "VLAN 子接口 ${MONITOR_VLAN_IFACE} 已存在，跳过创建"
+else
+    echo "正在创建 VLAN 子接口 ${MONITOR_VLAN_IFACE} ..."
+    ip link add link "${MONITOR_PHY_IFACE}" name "${MONITOR_VLAN_IFACE}" type vlan id "${MONITOR_VLAN_ID}"
+fi
+
+ip link set dev "${MONITOR_VLAN_IFACE}" alias "${MONITOR_ALIAS}"
+ip link set dev "${MONITOR_VLAN_IFACE}" up
+
+echo "monitor VLAN 子接口 ${MONITOR_VLAN_IFACE} 当前已生效"
+
+# -----------------------
+# 新增部分：写入 rc.local，保证重启后自动创建
+# -----------------------
+echo "=== 写入 rc.local，配置 monitor VLAN 开机自动创建 ==="
+
+if [[ ! -f /etc/rc.local ]]; then
+    cat > /etc/rc.local << 'EOF'
+#!/bin/bash
+
+exit 0
+EOF
+    chmod +x /etc/rc.local
+fi
+
+sed -i '/# BEGIN MONITOR VLAN/,/# END MONITOR VLAN/d' /etc/rc.local
+
+sed -i "/^exit 0/i\\
+# BEGIN MONITOR VLAN\\
+modprobe 8021q || true\\
+while ! ip link show ${MONITOR_PHY_IFACE} >/dev/null 2>&1; do\\
+    sleep 1\\
+done\\
+ip link show ${MONITOR_VLAN_IFACE} >/dev/null 2>&1 || ip link add link ${MONITOR_PHY_IFACE} name ${MONITOR_VLAN_IFACE} type vlan id ${MONITOR_VLAN_ID}\\
+ip link set dev ${MONITOR_VLAN_IFACE} alias ${MONITOR_ALIAS}\\
+ip link set dev ${MONITOR_VLAN_IFACE} up\\
+# END MONITOR VLAN\\
+" /etc/rc.local
+
+chmod +x /etc/rc.local
+
+systemctl enable rc-local 2>/dev/null || true
+systemctl enable rc-local.service 2>/dev/null || true
+
+echo "rc.local 已写入 monitor VLAN 配置"
+
+
+
 # -----------------------
 # k3s 配置部分
 # -----------------------
@@ -253,9 +301,48 @@ mirrors:
 EOF
 
 # -----------------------
-# NVMe 初始化
+# NVMe 分区与格式化
 # -----------------------
 
+# 检查磁盘是否存在
+if [[ ! -b /dev/nvme0n1 ]]; then
+    echo "错误：/dev/nvme0n1 不存在"
+    exit 1
+fi
+
+# 如果分区不存在，则创建
+if [[ ! -b /dev/nvme0n1p1 ]]; then
+    echo "/dev/nvme0n1p1 不存在，开始创建分区..."
+
+    if lsblk -nr /dev/nvme0n1 | awk '{print $6}' | grep -q '^part$'; then
+        echo "检测到已有分区，但没有 nvme0n1p1，请手动检查"
+        exit 1
+    fi
+
+    parted -s /dev/nvme0n1 mklabel gpt
+    parted -s /dev/nvme0n1 mkpart primary 0% 100%
+
+    partprobe /dev/nvme0n1
+    sleep 2
+
+    if [[ ! -b /dev/nvme0n1p1 ]]; then
+        echo "错误：分区创建失败"
+        exit 1
+    fi
+
+    echo "分区创建成功：/dev/nvme0n1p1"
+else
+    echo "/dev/nvme0n1p1 已存在，跳过创建分区"
+fi
+
+# 如果没有文件系统，则格式化
+if ! blkid /dev/nvme0n1p1 >/dev/null 2>&1; then
+    echo "/dev/nvme0n1p1 没有文件系统，开始格式化为 ext4..."
+    mkfs.ext4 -F /dev/nvme0n1p1
+else
+    echo "/dev/nvme0n1p1 已有文件系统，跳过格式化"
+fi
+
 # -----------------------
 # NVMe 挂载与绑定挂载
 # -----------------------
@@ -271,6 +358,10 @@ else
     echo "/mnt/nvme 已经挂载，跳过挂载"
 fi
 
+# ✅ 确保源目录存在（关键修复点）
+mkdir -p /mnt/nvme/rancher
+mkdir -p /mnt/nvme/longhorn
+
 # 确保绑定挂载目标目录存在
 mkdir -p /var/lib/rancher
 mkdir -p /var/lib/longhorn
@@ -291,49 +382,205 @@ else
     echo "/var/lib/longhorn 已经挂载，跳过绑定挂载"
 fi
 
-# 更新 /etc/fstab，保证开机自动挂载
+# -----------------------
+# 更新 /etc/fstab
+# -----------------------
+
 NVME_UUID=$(blkid -s UUID -o value /dev/nvme0n1p1)
+NVME_FSTYPE=$(blkid -s TYPE -o value /dev/nvme0n1p1)
 
+if [[ -z "$NVME_UUID" || -z "$NVME_FSTYPE" ]]; then
+    echo "错误：无法获取 UUID 或文件系统类型，停止写入 fstab"
+    exit 1
+fi
+
+# 主挂载（安全）
 grep -qE "[[:space:]]/mnt/nvme[[:space:]]" /etc/fstab || \
-echo "UUID=${NVME_UUID} /mnt/nvme ext4 defaults,nofail 0 2" >> /etc/fstab
+echo "UUID=${NVME_UUID} /mnt/nvme ${NVME_FSTYPE} defaults,nofail,x-systemd.device-timeout=5 0 2" >> /etc/fstab
 
-grep -qE "^/mnt/nvme/rancher[[:space:]]+/var/lib/rancher[[:space:]]+none[[:space:]]+bind" /etc/fstab || \
+# bind mount（安全）
-echo "/mnt/nvme/rancher /var/lib/rancher none bind 0 0" >> /etc/fstab
+grep -qE "[[:space:]]/var/lib/rancher[[:space:]]" /etc/fstab || \
+echo "/mnt/nvme/rancher /var/lib/rancher none bind,nofail,x-systemd.requires-mounts-for=/mnt/nvme 0 0" >> /etc/fstab
 
-grep -qE "^/mnt/nvme/longhorn[[:space:]]+/var/lib/longhorn[[:space:]]+none[[:space:]]+bind" /etc/fstab || \
+grep -qE "[[:space:]]/var/lib/longhorn[[:space:]]" /etc/fstab || \
-echo "/mnt/nvme/longhorn /var/lib/longhorn none bind 0 0" >> /etc/fstab
+echo "/mnt/nvme/longhorn /var/lib/longhorn none bind,nofail,x-systemd.requires-mounts-for=/mnt/nvme 0 0" >> /etc/fstab
 
-# 显示挂载状态
+# -----------------------
+# 验证
+# -----------------------
+
+echo "测试 fstab..."
+mount -a
+
+echo "显示挂载状态"
 findmnt /mnt/nvme
 findmnt /var/lib/rancher
 findmnt /var/lib/longhorn
 
-
 # -----------------------
 # 时间同步
 # -----------------------
-echo "=== 安装并配置 chrony ==="
+echo "=== 时间同步配置 ==="
-apt update
+
-apt install -y chrony linuxptp
+: "${ENABLE_CHRONY:=true}"
-cp /etc/chrony/chrony.conf /etc/chrony/chrony.conf.bak 2>/dev/null
+: "${ENABLE_GPTP:=false}"
-cat > /etc/chrony/chrony.conf << EOF
+
-server 10.250.0.1 iburst prefer
+if [[ "${ENABLE_CHRONY}" == "true" || "${ENABLE_GPTP}" == "true" ]]; then
-server 10.250.0.2 iburst
+    echo "安装时间同步相关组件..."
-server 10.250.0.3 iburst
+    apt update
+    apt install -y chrony linuxptp
+fi
+
+# ===================================================
+# chrony 配置：由客户选择是否启用
+# ===================================================
+if [[ "${ENABLE_CHRONY}" == "true" ]]; then
+    echo "=== 启用 chrony 时间同步 ==="
+
+    cp /etc/chrony/chrony.conf /etc/chrony/chrony.conf.bak 2>/dev/null || true
+
+    cat > /etc/chrony/chrony.conf << EOF
+# 由 bushu.sh 自动生成
+
+EOF
+
+    for server in "${CHRONY_SERVERS[@]}"; do
+        echo "server ${server}" >> /etc/chrony/chrony.conf
+    done
+
+    cat >> /etc/chrony/chrony.conf << EOF
 
 driftfile /var/lib/chrony/chrony.drift
 makestep 1.0 3
 rtcsync
 logdir /var/log/chrony
 EOF
-systemctl enable chrony
-systemctl restart chrony
-chronyc sources
-chronyc tracking
 
-echo "=== 启动 PTP 同步 ==="
+    systemctl enable chrony
-ptp4l -i $CLOUD_IFACE -m &
+    systemctl restart chrony
-phc2sys -s $CLOUD_IFACE -c CLOCK_REALTIME -m &
+
+    chronyc sources || true
+    chronyc tracking || true
+
+    echo "chrony 已启用"
+else
+    echo "=== 未启用 chrony ==="
+    systemctl disable chrony 2>/dev/null || true
+    systemctl stop chrony 2>/dev/null || true
+fi
+
+# ===================================================
+# gPTP 配置：由客户选择是否启用
+# ===================================================
+if [[ "${ENABLE_GPTP}" == "true" ]]; then
+    echo "=== 启用 gPTP 时间同步 ==="
+
+    : "${GPTP_IFACE:?请在 bushu.conf 中配置 GPTP_IFACE}"
+
+    echo "gPTP 使用物理网卡: ${GPTP_IFACE}"
+
+    mkdir -p /usr/local/bin
+    mkdir -p /etc/linuxptp
+
+    # -----------------------
+    # 创建 gPTP 配置文件
+    # -----------------------
+    cat > /etc/linuxptp/gptp.cfg << EOF
+# 由 bushu.sh 自动生成
+# gPTP / IEEE 802.1AS 配置
+
+[global]
+gmCapable               1
+priority1               248
+priority2               248
+logAnnounceInterval     0
+logSyncInterval         -3
+syncReceiptTimeout      3
+neighborPropDelayThresh 800
+min_neighbor_prop_delay -20000000
+assume_two_step         1
+path_trace_enabled      1
+follow_up_info          1
+transportSpecific       0x1
+ptp_dst_mac             01:80:C2:00:00:0E
+network_transport       L2
+delay_mechanism         P2P
+time_stamping           hardware
+EOF
+
+    # -----------------------
+    # 创建 gPTP 执行脚本
+    # -----------------------
+    cat > /usr/local/bin/start-gptp.sh << 'EOF'
+#!/bin/bash
+set -euo pipefail
+
+GPTP_IFACE="${1:?Usage: start-gptp.sh <interface>}"
+
+echo "gPTP interface: ${GPTP_IFACE}"
+
+# 等待网卡出现
+while ! ip link show "${GPTP_IFACE}" >/dev/null 2>&1; do
+    echo "等待网卡 ${GPTP_IFACE} 出现..."
+    sleep 1
+done
+
+# 启动网卡
+ip link set dev "${GPTP_IFACE}" up
+
+# 检查网卡是否支持硬件时间戳
+if ethtool -T "${GPTP_IFACE}" 2>/dev/null | grep -q "hardware-transmit"; then
+    TS_MODE="hardware"
+else
+    echo "警告：${GPTP_IFACE} 可能不支持硬件时间戳，切换为 software timestamp"
+    TS_MODE="software"
+    sed -i 's/^time_stamping.*/time_stamping           software/' /etc/linuxptp/gptp.cfg
+fi
+
+echo "gPTP timestamp mode: ${TS_MODE}"
+
+# 启动 ptp4l，使用 gPTP 配置
+exec /usr/sbin/ptp4l \
+    -i "${GPTP_IFACE}" \
+    -f /etc/linuxptp/gptp.cfg \
+    -m
+EOF
+
+    chmod +x /usr/local/bin/start-gptp.sh
+
+    # -----------------------
+    # 创建 gPTP systemd 服务
+    # -----------------------
+    cat > /etc/systemd/system/gptp.service << EOF
+[Unit]
+Description=gPTP IEEE 802.1AS Service
+Documentation=man:ptp4l
+After=network-online.target
+Wants=network-online.target
+
+[Service]
+Type=simple
+ExecStart=/usr/local/bin/start-gptp.sh ${GPTP_IFACE}
+Restart=always
+RestartSec=5
+User=root
+
+[Install]
+WantedBy=multi-user.target
+EOF
+
+    systemctl daemon-reload
+    systemctl enable gptp.service
+    systemctl restart gptp.service
+
+    echo "gPTP 服务已启用"
+    systemctl status gptp.service --no-pager || true
+else
+    echo "=== 未启用 gPTP ==="
+    systemctl disable gptp.service 2>/dev/null || true
+    systemctl stop gptp.service 2>/dev/null || true
+fi
+
 
 # -----------------------
 # 域名解析
@@ -349,4 +596,4 @@ done
 systemctl daemon-reload
 systemctl enable k3s
 systemctl start k3s
-echo "k3s 配置完成"
+echo "k3s 配置完成"