We have two node selection functions: includeNodeFromNodeList and
getNodeConditionPredicate, and the logic is different.
The logic should be the same, so remove includeNodeFromNodeList and just
use getNodeConditionPredicate everywhere.
Fix#45772
Automatic merge from submit-queue (batch tested with PRs 44748, 45692)
Limiting client go packages visibility, round 3
Continue the work in the merged PR https://github.com/kubernetes/kubernetes/pull/45258
These packages in client-go will be gone after #44065 is fixed:
pkg/api/helper, pkg/api/util, internal version of api groups, API install packages.
This PR removes the dependency on these packages and add bazel visibility rules to prevent relapse.
Automatic merge from submit-queue (batch tested with PRs 45685, 45572, 45624, 45723, 45733)
resource quota full resync was removed in error
**What this PR does / why we need it**:
the quota controller should have had a full resync interval, and it was inadvertently removed in the move to shared informers.
**Which issue this PR fixes**
This fixes quota recalculation happening at the specified interval.
**Special notes for your reviewer**:
**Release note**:
```release-note
the resource quota controller was not adding quota to be resynced at proper interval
```
change import of client-go/api/helper to kubernetes/api/helper
remove unnecessary use of client-go/api.registry
change use of client-go/pkg/util to kubernetes/pkg/util
remove dependency on client-go/pkg/apis/extensions
remove unnecessary invocation of k8s.io/client-go/extension/intsall
change use of k8s.io/client-go/pkg/apis/authentication to v1
The new fake client properly represents the resource of `PodMetrics` as
"pods" and the resource of `NodeMetrics` as "nodes". Previously, it
used "podmetricses" and "nodemetrics", respectively.
This fixes up `horizontal_test.go` and `replica_calc_test.go` to use the
new names.
Automatic merge from submit-queue (batch tested with PRs 45304, 45006, 45527)
increase the QPS for namespace controller
The namespace controller is really chatty. Especially to discovery since that involves two requests for every API version available. This bumps the QPS and burst on the namespace controller to avoid being stuck waiting.
Automatic merge from submit-queue (batch tested with PRs 45508, 44258, 44126, 45441, 45320)
cloud initialize node in external cloud controller
@thockin This PR adds support in the `cloud-controller-manager` to initialize nodes (instead of kubelet, which did it previously)
This also adds support in the kubelet to skip node cloud initialization when `--cloud-provider=external`
Specifically,
Kubelet
1. The kubelet has a new flag called `--provider-id` which uniquely identifies a node in an external DB
2. The kubelet sets a node taint - called "ExternalCloudProvider=true:NoSchedule" if cloudprovider == "external"
Cloud-Controller-Manager
1. The cloud-controller-manager listens on "AddNode" events, and then processes nodes that starts with that above taint. It performs the cloud node initialization steps that were previously being done by the kubelet.
2. On addition of node, it figures out the zone, region, instance-type, removes the above taint and updates the node.
3. Then periodically queries the cloudprovider for node addresses (which was previously done by the kubelet) and updates the node if there are new addresses
```release-note
NONE
```
Automatic merge from submit-queue
fix the typos of e.g.
fix the typos of e.g.
**What this PR does / why we need it**:
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes #
**Special notes for your reviewer**:
**Release note**:
```release-note
```
Automatic merge from submit-queue (batch tested with PRs 43732, 45413)
Extend timeouts in timed_workers_test
Fix#45375
If it won't be enough I'll rewrite it to allow injectable timers.
Automatic merge from submit-queue (batch tested with PRs 43732, 45413)
Handle maxUnavailable larger than spec.replicas
**What this PR does / why we need it**:
Handle maxUnavailable larger than spec.replicas
**Which issue this PR fixes**
fixes#42479
**Special notes for your reviewer**:
None
**Release note**:
```
NONE
```
Automatic merge from submit-queue
stateful_pod_control.go: format the code
**What this PR does / why we need it**:
1.Improve the quality of the code.
2.Reduce reduandant parameters
3.add one comma
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes #
**Special notes for your reviewer**:
**Release note**:
```release-note
NONE
```
Automatic merge from submit-queue
Update token controller test to test async retry
Fixes#44819https://github.com/kubernetes/kubernetes/pull/44625 changed the token controller to queue a retry if the live service account's resourceVersion did not match our cache.
This updates the unit test that was testing that condition to test async queue behavior (which this condition now drives)
Automatic merge from submit-queue (batch tested with PRs 42477, 44462)
Use storage.v1 instead of v1beta1
storage.v1beta1 was used to work around GKE which did not expose v1. Now that GKE is updated, we can switch everything to v1.
This is simple sed v1beta1 -> v1 + enabled a new test + changed preference of exposed interfaces in `storage/install/install.go`.
@msau42, PTAL and let me know when GKE is updated with storage v1 API and this PR can be actually merged.
@kubernetes/sig-storage-pr-reviews
```release-note
NONE
```
Automatic merge from submit-queue (batch tested with PRs 44741, 44853, 44572, 44797, 44439)
controller: fix saturation check in Deployments
Fixes https://github.com/kubernetes/kubernetes/issues/44436
@kubernetes/sig-apps-bugs
I'll cherry-pick this back to 1.6 and 1.5
Automatic merge from submit-queue (batch tested with PRs 40060, 44860, 44865, 44825, 44162)
servicecontroller: remove unused zone field
The zone field was unused, and this complicated e.g. #39996
```release-note
NONE
```
Automatic merge from submit-queue (batch tested with PRs 44862, 42241, 42101, 43181, 44147)
Feature/hpa upscale downscale delay configurable
**What this PR does / why we need it**:
Makes "upscale forbidden window" and "downscale forbidden window" duration configurable in arguments of kube-controller-manager. Those are options of horizontal pod autoscaler.
**Special notes for your reviewer**:
Please have a look @DirectXMan12 , the PR as discussed in Slack.
**Release note**:
```
Make "upscale forbidden window" and "downscale forbidden window" duration configurable in arguments of kube-controller-manager. Those are options of horizontal pod autoscaler. Right now are hardcoded 3 minutes for upscale, and 5 minutes to downscale. But sometimes cluster administrator might want to change this for his own needs.
```
Automatic merge from submit-queue (batch tested with PRs 43575, 44672)
Update deployment and daemonset completeness checks
maxUnavailable being taken into account for deployment completeness has caused a lot of confusion (https://github.com/kubernetes/kubernetes/issues/44395, https://github.com/kubernetes/kubernetes/issues/44657, https://github.com/kubernetes/kubernetes/issues/40496, others as well I am sure) so I am willing to just stop using it and require all of the new Pods for a Deployment to be available for the Deployment to be considered complete (hence both `rollout status` and ProgressDeadlineSeconds will not be successful in cases where a 1-pod Deployment never becomes successful because its Pod never transitions to ready).
@kubernetes/sig-apps-api-reviews thoughts?
```release-note
Deployments and DaemonSets are now considered complete once all of the new pods are up and running - affects `kubectl rollout status` (and ProgressDeadlineSeconds for Deployments)
```
Fixes https://github.com/kubernetes/kubernetes/issues/44395
Automatic merge from submit-queue
Exclude master from LoadBalancer / NodePort
The servicecontroller documents that the master is excluded from the
LoadBalancer / NodePort, but this is broken for clusters where we are
using taints for the master (as introduced in 1.6), instead of marking
the master as unschedulable.
This restores the desired documented behaviour, by excluding nodes that
are labeled as masters with the new 1.6 labels, even if they use the new
1.6 taints.
Fix#33884
```release-note
Exclude nodes labeled as master from LoadBalancer / NodePort; restores documented behaviour
```
Automatic merge from submit-queue
Improve Service controller's code coverage a little bit
**What this PR does / why we need it**:
Improves the code coverage for Service Controller
Before
```
go test --cover ./pkg/controller/service
ok k8s.io/kubernetes/pkg/controller/service 0.101s coverage: 23.4% of statements
```
After
```
go test --cover ./pkg/controller/service/
ok k8s.io/kubernetes/pkg/controller/service 0.094s coverage: 62.0% of statements
```
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes #
More unit testing
**Special notes for your reviewer**:
**Release note**:
```release-note
NONE
```
Automatic merge from submit-queue (batch tested with PRs 44625, 43594, 44756, 44730)
Check for terminating Pod prior to launching successor in StatefulSet
Modifies sync loop for StatefulSet controller to check if a Pod is terminating before launching its successor. Fixes#44229. Should be cherry picked into 1.6 branch.
**Which issue this PR fixes**
fixes#44229
```release-note
NONE
```
Automatic merge from submit-queue (batch tested with PRs 44625, 43594, 44756, 44730)
Retry secret reference addition on conflict
* Tolerates leading or trailing etcd reads when fetching liveServiceAccount - fixes#25416
* Tolerates conflicts when updating the service account with the secret reference (does RetryOnConflict before deleting token and completely restarting the flow) - fixes#44054
Automatic merge from submit-queue
More RC/RS controller logging updates
We were comparing the address of the old and new RC.spec.replicas and we
have to compare the values. This only affects logging.
Update RS controller to match RC controller to log when spec.replicas
changes, not status.replicas.
@kargakis @janetkuo @sttts @liggitt
We were comparing the address of the old and new RC.spec.replicas and we
have to compare the values. This only affects logging.
Update RS controller to match RC controller to log when spec.replicas
changes, not status.replicas.
Automatic merge from submit-queue (batch tested with PRs 41498, 44487)
Use len of pods in stateful set error
**What this PR does / why we need it**:
Sync stateful set reports wrong error, we need to fix it.
**Release note**:
```release-note
`NONE`
```
The servicecontroller documents that the master is excluded from the
LoadBalancer / NodePort, but this is broken for clusters where we are
using taints for the master (as introduced in 1.6), instead of marking
the master as unschedulable.
This restores the desired documented behaviour, by excluding nodes that
are labeled as masters with the new 1.6 labels, even if they use the new
1.6 taints.
Fix#33884
Automatic merge from submit-queue (batch tested with PRs 44722, 44704, 44681, 44494, 39732)
Fix issue #34242: Attach/detach should recover from a crash
When the attach/detach controller crashes and a pod with attached PV is deleted afterwards the controller will never detach the pod's attached volumes. To prevent this the controller should try to recover the state from the nodes status and figure out which volumes to detach. This requires some changes in the volume providers too: the only information available from the nodes is the volume name and the device path. The controller needs to find the correct volume plugin and reconstruct the volume spec just from the name. This required a small change also in the volume plugin interface.
Fixes Issue #34242.
cc: @jsafrane @jingxu97
Automatic merge from submit-queue (batch tested with PRs 42177, 42176, 44721)
Job: Respect ControllerRef
**What this PR does / why we need it**:
This is part of the completion of the [ControllerRef](https://github.com/kubernetes/community/blob/master/contributors/design-proposals/controller-ref.md) proposal. It brings Job into full compliance with ControllerRef. See the individual commit messages for details.
**Which issue this PR fixes**:
This ensures that Job does not fight with other controllers over control of Pods.
Ref: #24433
**Special notes for your reviewer**:
**Release note**:
```release-note
Job controller now respects ControllerRef to avoid fighting over Pods.
```
cc @erictune @kubernetes/sig-apps-pr-reviews
Automatic merge from submit-queue (batch tested with PRs 42177, 42176, 44721)
CronJob: Respect ControllerRef
**What this PR does / why we need it**:
This is part of the completion of the [ControllerRef](https://github.com/kubernetes/community/blob/master/contributors/design-proposals/controller-ref.md) proposal. It brings CronJob into compliance with ControllerRef. See the individual commit messages for details.
**Which issue this PR fixes**:
This ensures that other controllers do not fight over control of objects that a CronJob owns.
**Special notes for your reviewer**:
**Release note**:
```release-note
CronJob controller now respects ControllerRef to avoid fighting with other controllers.
```
cc @erictune @kubernetes/sig-apps-pr-reviews
When the attach/detach controller crashes and a pod with attached PV is deleted
afterwards the controller will never detach the pod's attached volumes. To
prevent this the controller should try to recover the state from the nodes
status.
Automatic merge from submit-queue
Fixes an issue in cide_set.go
Function getBeginingAndEndIndices may return
end index too big
**What this PR does / why we need it**:
Fixes getBeginingAndEndIndices() in cidr_set.go
End index is off by one when s.clusterMaskSize >= maskSize
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes#44558
**Special notes for your reviewer**:
**Release note**:
```release-note
```
This should only happen if the Jobs were created by an older version
of the CronJob controller, since from now on we add ControllerRef upon
creation.
CronJob doesn't do actual adoption because it doesn't use label
selectors to find its Jobs. However, we should apply ControllerRef
for potential server-side cascading deletion, and to advise other
controllers we own these objects.
Automatic merge from submit-queue (batch tested with PRs 44469, 44566, 44467, 44526)
WaitForCacheSync before running attachdetach controller
@gnufied you wrote the test and @ncdc the TODO comment. Let's just run the pv and pvc informers, we do not care about them in this test. But we want to be able to stop the pod Informer at will, hence not just using informers.Start, is my understanding.
```release-note
NONE
```
Automatic merge from submit-queue (batch tested with PRs 40055, 42085, 44509, 44568, 43956)
Fix gofmt errors
**What this PR does / why we need it**:
There were some gofmt errors on master. Ran the following to fix:
```
hack/verify-gofmt.sh | grep ^diff | awk '{ print $2 }' | xargs gofmt -w -s
```
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close that issue when PR gets merged)*: none
**Special notes for your reviewer**:
**Release note**:
```release-note
NONE
```
Automatic merge from submit-queue (batch tested with PRs 44362, 44421, 44468, 43878, 44480)
fix error message in ReplicaCalculator
**What this PR does / why we need it**: fixes spelling in an error message
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes #
**Special notes for your reviewer**: have previously signed the CLA for minikube, not sure if that covers this repo also.
**Release note**:
```release-note
```
Automatic merge from submit-queue (batch tested with PRs 44424, 44026, 43939, 44386, 42914)
ServiceAccountsController does not need nameIndexFunc to index ST
The ServiceAccountsController's Informer does not need nameIndexFunc.
Automatic merge from submit-queue (batch tested with PRs 44406, 41543, 44071, 44374, 44299)
Record a warning type event
A warning type event should be recorded when failed to calculate
the number of expected pods.
Automatic merge from submit-queue (batch tested with PRs 44447, 44456, 43277, 41779, 43942)
Clean up pre-ControllerRef compatibility logic
**What this PR does / why we need it**:
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes#43323
**Special notes for your reviewer**:
No
**Release note**:
```
NONE
```
Automatic merge from submit-queue
Reduce replication_controller log spam
Decrease verbosity and reword 'Observed updated replication controller
...' now that the issue it was added for has been fixed.
This was originally added to debug #31981, and it was fixed back in September 2016.
cc @gmarek @wojtek-t @kargakis @eparis @smarterclayton
Automatic merge from submit-queue
Exit from NewController() for PersistentVolumeController when InitPlugins() failed
Exit from NewController() for PersistentVolumeController when InitPlugins() failed just like NewAttachDetachController() does
**Release note**:
```release-note
NONE
```
@jsafrane @saad-ali PTAL. Thanks in advance
Automatic merge from submit-queue
Move api helpers.go to a subpackage
Part of https://github.com/kubernetes/kubernetes/issues/44065.
This PR moves the pkg/api/helpers.go to its own subpackage. It's mostly a mechanic move, except that
* I removed ConversionError in helpers.go, it's not used by anyone
* I moved the 3 methods of Taint and Toleration to pkg/api/methods.go, and left a TODO saying refactoring these methods to functions.
I'll send a few more PRs to make the k8s.io/kubernetes/pkg/api package only contains the code we want in the k8s.io/api repo, then we can run a [script](a0015fd1be (diff-7a2fbb4371972350ee414c6b88aee1c8)) to cut the new repo.
Automatic merge from submit-queue
Add support for IP aliases for pod IPs (GCP alpha feature)
```release-note
Adds support for allocation of pod IPs via IP aliases.
# Adds KUBE_GCE_ENABLE_IP_ALIASES flag to the cluster up scripts (`kube-{up,down}.sh`).
KUBE_GCE_ENABLE_IP_ALIASES=true will enable allocation of PodCIDR ips
using the ip alias mechanism rather than using routes. This feature is currently
only available on GCE.
## Usage
$ CLUSTER_IP_RANGE=10.100.0.0/16 KUBE_GCE_ENABLE_IP_ALIASES=true bash -x cluster/kube-up.sh
# Adds CloudAllocator to the node CIDR allocator (kubernetes-controller manager).
If CIDRAllocatorType is set to `CloudCIDRAllocator`, then allocation
of CIDR allocation instead is done by the external cloud provider and
the node controller is only responsible for reflecting the allocation
into the node spec.
- Splits off the rangeAllocator from the cidr_allocator.go file.
- Adds cloudCIDRAllocator, which is used when the cloud provider allocates
the CIDR ranges externally. (GCE support only)
- Updates RBAC permission for node controller to include PATCH
```
A warning type event should be recorded when failed to calculate
the number of expected pods.
And the same to daemoncontroller when failed to place pod.
Automatic merge from submit-queue
Remove alphaProvisioner in PVController and AlphaStorageClassAnnotation
remove alpha annotation and alphaProvisioner
**Release note**:
```release-note
NONE
```
If CIDRAllocatorType is set to `CloudCIDRAllocator`, then allocation
of CIDR allocation instead is done by the external cloud provider and
the node controller is only responsible for reflecting the allocation
into the node spec.
- Splits off the rangeAllocator from the cidr_allocator.go file.
- Adds cloudCIDRAllocator, which is used when the cloud provider allocates
the CIDR ranges externally. (GCE support only)
- Updates RBAC permission for node controller to include PATCH
Automatic merge from submit-queue (batch tested with PRs 43900, 44152, 44324)
make deployment unit tests need to respect subresources
Fixes#42569
I check all the unit test code related to `Matches` method, seems there's only one line we could change to not break previous testing logic
@kargakis ptal, thanks
/assign @kargakis
Automatic merge from submit-queue
add Stringer interface for eventType
**What this PR does / why we need it**:
fix invalid log outputs like
"graph_builder.go:429] GraphBuilder process object: v1/Endpoints, namespace kube-system, name kube-controller-manager, event type %!s(garbagecollector.eventType=1)"
Automatic merge from submit-queue (batch tested with PRs 41758, 44137)
Removed hostname/subdomain annotation.
fixes#44135
```release-note
Remove `pod.beta.kubernetes.io/hostname` and `pod.beta.kubernetes.io/subdomain` annotations.
Users should use `pod.spec.hostname` and `pod.spec.subdomain` instead.
```
Automatic merge from submit-queue
Improve event msg for PV controller when using external provisioner
Improve event msg for PV controller when using external provisioner
**Which issue this PR fixes** *:
Fixed part of #42121
**Special notes for your reviewer**:
@jsafrane, as many of our users are confused by the original message, can we fix the message first and then consider how to control the count of the events?
Automatic merge from submit-queue (batch tested with PRs 41775, 39678, 42629, 42524, 43028)
matchPredicate does not fit findByClaim()
matchPredicate has two args which are type of PV,and is not used in function findByClaim(),remove it
**Release note**:
```release-note
NONE
```
Automatic merge from submit-queue (batch tested with PRs 43373, 41780, 44141, 43914, 44180)
Updated comments according to the logic.
Updated comments according to the logic: it'll return empty string instead of nil if failed to match the regex.
Automatic merge from submit-queue
small code improvements and fix some typos
Signed-off-by: bruceauyeung <ouyang.qinhua@zte.com.cn>
**What this PR does / why we need it**:
1. eliminate unnecessary extra scale up limit calculation
2. eliminate unnecessary extra pods length computation
3. fix some typos
Automatic merge from submit-queue (batch tested with PRs 42961, 44042)
Allow swapping NotReady and Unschedulable Taints
Fix#43444
cc @kubernetes/sig-scheduling-pr-reviews @davidopp @aveshagarwal @mdshuai
For cherrypick @ethernetdan
Automatic merge from submit-queue (batch tested with PRs 43963, 43965)
Update deployment retries to a saner count
It seems that the current retries sum up to no more than 0.2s so some transient errors may drop deployments out of the queue.
Automatic merge from submit-queue (batch tested with PRs 43963, 43965)
Wait for clean old RSs statuses in the middle of Recreate rollouts
After https://github.com/kubernetes/kubernetes/pull/43508 got merged, we started returning ReplicaSets with no pods but with stale statuses back to the rollout functions. As a consequence, one of our e2e tests that checks if a Recreate Deployment runs pods from different versions, started flakying because the Deployment status may be incorrect. This change simply waits for the statuses to get cleaned up before proceeding with scaling up the new RS.
Fixes https://github.com/kubernetes/kubernetes/issues/43864
@kubernetes/sig-apps-bugs
Automatic merge from submit-queue (batch tested with PRs 44084, 42964)
Updated AddOrUpdateTolerationInPod to return bool only.
Updated AddOrUpdateTolerationInPod to return bool only, as there's no case to generate error (the error was used for annotation, it'll not return error after moving to field); and also update admission & daemonset accordingly.
Automatic merge from submit-queue (batch tested with PRs 43453, 42992)
make sure that the volume satisfies the requirements of the claim before binding
check if the volume requested by the claim satisfies the requirements of the claim before binding when
syncUnboundClaim and claim.Spec.VolumeName is not set, although the volume is asked by user
**Release note**:
```release-note
NONE
```
Automatic merge from submit-queue
Adding gnufied as reviewer for volume controller
I have helped review several PRs and made new
PRs to this area.
cc @childsb @saad-ali
check if the volume requested by the claim satisfies the requirements of the claim before binding when
syncUnboundClaim and claim.Spec.VolumeName is not set
Automatic merge from submit-queue
Make Constants Public so that They Can Be Used in an Ext. Provisioner
Out-of-tree external provisioners have the same purpose as in-tree provisioners. As external provisioners work with PV and PVC datastructures it's an advantage to import certain Kubernetes packages instead of copy-pasting the Kubernetes code.
That's why the constants are made public so that they can be used in an external provisioner.
@jsafrane @kubernetes/sig-storage-pr-reviews
```
NONE
```
Automatic merge from submit-queue
update pkg/controller/volume/OWNER to add appropriate approvers for both volume controllers
Update pkg/controller/volume approvers so that the attach/detach and binding controllers have approvers.
Automatic merge from submit-queue
Attach/detach controller: fix potential race in constructor
**What this PR does / why we need it**:
There is a potential race condition in the Attach/detach controller: The "constructor" first installs informer event handlers and then creates and initializes the other data structures. However there is no guarantee an event cannot arrive before the data structures required by the event handlers are ready. This may result in nil pointer derefernces and potential crashes (e.g. the nodeAdd method calls adc.actualStateOfWorld.SetNodeStatusUpdateNeeded even though the actualStateOfWorld might be still nil).
It should be enough just to move the event handlers installation at the end of the constructor function.
**Release note**:
```release-note
NONE
```
Automatic merge from submit-queue
fix createProvisionedPV result err judgenment bug
When ctrl.kubeClient.Core().PersistentVolumes().Create(volume) returns no err, and storeVolumeUpdate() fails, we save PV sucessfully ,but here err is not nil,we should not run the codes next in block if err != nil {} to delete the storage asset.
same in the deletion retries below
change the err names to make it clear
**Release note**:
```release-note
NONE
```
@jsafrane @saad-ali PTAL. Thanks
Automatic merge from submit-queue
Fix PVC Annotations
annDynamicallyProvisioned is added to PV, while PVC has annStorageProvisioner.
**Release note**:
```release-note
NONE
```
Automatic merge from submit-queue (batch tested with PRs 43429, 43416, 43312, 43141, 43421)
remove duplicated import
**What this PR does / why we need it**:
**Which issue this PR fixes**:
**Special notes for your reviewer**:
**Release note**:
```
NONE
```
Automatic merge from submit-queue (batch tested with PRs 43378, 43216, 43384, 43083, 43428)
Remove unused argument of 'groupJobsByParent' in cronjob controller
**What this PR does / why we need it**:
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes #
**Special notes for your reviewer**:
**Release note**:
```release-note
```
When ctrl.kubeClient.Core().PersistentVolumes().Create(volume) returns no err, but storeVolumeUpdate() failed, we save PV sucessfully ,but here err is not nil,
we should not run the codes next in block if err != nil {}
same in the deletion retries below
Automatic merge from submit-queue (batch tested with PRs 42522, 42545, 42556, 42006, 42631)
optimize the binding logic of bindClaimToVolume
extract var shouldSetBoundByController and do not need to judge volumename twice
**Release note**:
```release-note
NONE
```
Automatic merge from submit-queue
fix typos
**What this PR does / why we need it**:
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes #
**Special notes for your reviewer**:
**Release note**:
```release-note
```
Automatic merge from submit-queue
small change to ControlleeExpectations result judgement
GetByKey() will never return err, so err != nil {} is redundant,remove it and remove the err return too
**Release note**:
```release-note
NONE
```
Out-of-tree external provisioners have the same purpose as in-tree provisioners. As external provisioners work with PV and PVC datastructures it's an advantage to import certain Kubernetes packages instead of copy-pasting the Kubernetes code.
That's why the constants are made public so that they can be used in an external provisioner.
Auto-generated via:
git grep -l [Ss]uccesfully | xargs sed -ri 's/([sS])uccesfully/\1uccessfully/g'
I noticed this when running kube-scheduler with --v4 and it is annoying.
Then manually reverted changed to the vendored bits.
Automatic merge from submit-queue (batch tested with PRs 43481, 43419, 42741, 43480)
controller: work around milliseconds skew in AddAfter
AddAfter is not requeueing precisely after the provided time and may
skew for some millieseconds. This is really important because controllers
don't relist often so a missed check because of ms difference is
essentially dropping the key. For example, in [1] the test requeues a
Deployment for a progress check after 10s[2] but the Deployment is synced
9ms earlier ending up in the controller not recognizing the Deployment as
failed thus dropping it from the queue w/o any error. The drop is fixed by
forcing the controller to resync the Deployment but we are going to resync
after the full duration.
@deads2k if you don't like this I am going to handle this on a case by case basis
[1] https://github.com/kubernetes/kubernetes/issues/39785#issuecomment-279959133
[2] c48b2cab0f/test/e2e/deployment.go (L1122)
Automatic merge from submit-queue
Rate limit HPA controller to sync period
Since the HPA controller pulls information from an external source that
makes no guarantees about consistency, it's possible for the HPA
to get into an infinite update loop -- if the metrics change with
every query, the HPA controller will run it's normal reconcilation,
post a status update, see that status update itself, fetch new metrics,
and if those metrics are different, post another status update, and
repeat. This can lead to continuously updating a single HPA.
By rate-limiting each HPA to once per sync interval, we prevent this
from happening.
**Release note**:
```release-note
NONE
```
Automatic merge from submit-queue
Deflake TestSyncDeploymentDeletionRace
**What this PR does / why we need it**:
The cache was sometimes catching up while we were testing the case
where the cache is not yet caught up.
Before this fix, I could reproduce the failure with the following
command. After the fix, it passes.
```
go test -count 100000 -run TestSyncDeploymentDeletionRace
```
I checked the other controllers, and they all were already not starting informers for the deletion race test. I also checked that the deletion race tests for other controllers all pass with `-count 100000`.
**Which issue this PR fixes**:
Fixes#43390
**Special notes for your reviewer**:
**Release note**:
```release-note
NONE
```
The cache was sometimes catching up while we were testing the case
where the cache is not yet caught up.
Before this fix, I could reproduce the failure with the following
command. After the fix, it passes.
```
go test -count 100000 -run TestSyncDeploymentDeletionRace
```
Automatic merge from submit-queue
GC: Fix re-adoption race when orphaning dependents.
**What this PR does / why we need it**:
The GC expects that once it sees a controller with a non-nil
DeletionTimestamp, that controller will not attempt any adoption.
There was a known race condition that could cause a controller to
re-adopt something orphaned by the GC, because the controller is using a
cached value of its own spec from before DeletionTimestamp was set.
This fixes that race by doing an uncached quorum read of the controller
spec just before the first adoption attempt. It's important that this
read occurs after listing potential orphans. Note that this uncached
read is skipped if no adoptions are attempted (i.e. at steady state).
**Which issue this PR fixes**:
Fixes#42639
**Special notes for your reviewer**:
**Release note**:
```release-note
```
cc @kubernetes/sig-apps-pr-reviews
The GC expects that once it sees a controller with a non-nil
DeletionTimestamp, that controller will not attempt any adoption.
There was a known race condition that could cause a controller to
re-adopt something orphaned by the GC, because the controller is using a
cached value of its own spec from before DeletionTimestamp was set.
This fixes that race by doing an uncached quorum read of the controller
spec just before the first adoption attempt. It's important that this
read occurs after listing potential orphans. Note that this uncached
read is skipped if no adoptions are attempted (i.e. at steady state).
Automatic merge from submit-queue
kubectl: Use v1.5-compatible ownership logic when listing dependents.
**What this PR does / why we need it**:
This restores compatibility between kubectl 1.6 and clusters running Kubernetes 1.5.x. It introduces transitional ownership logic in which the client considers ControllerRef when it exists, but does not require it to exist.
If we were to ignore ControllerRef altogether (pre-1.6 client behavior), we would introduce a new failure mode in v1.6 because controllers that used to get stuck due to selector overlap will now make progress. For example, that means when reaping ReplicaSets of an overlapping Deployment, we would risk deleting ReplicaSets belonging to a different Deployment that we aren't about to delete.
This transitional logic avoids such surprises in 1.6 clusters, and does no worse than kubectl 1.5 did in 1.5 clusters. To prevent this when kubectl 1.5 is used against 1.6 clusters, we can cherrypick this change.
**Which issue this PR fixes**:
Fixes#43159
**Special notes for your reviewer**:
**Release note**:
```release-note
```
Automatic merge from submit-queue
Fix revision when SetDeploymentRevision
When some oldRSs be deleted or cleared(eg. revisionHistoryLimit set 0), the revision for SetDeploymentRevision is incorrect
In particular, we should not assume ControllerRefs are necessarily set.
However, we can still use ControllerRefs that do exist to avoid
interfering with controllers that do use it.
This effectively reverts the client-side changes in
cec3899b96.
We have to maintain the old behavior on the client side to support
version skew when talking to old servers that set the annotation.
However, the new server-side behavior is still to NOT set the
annotation.
Automatic merge from submit-queue
Fix Deployment upgrade test.
**What this PR does / why we need it**:
When the upgrade test operates on Deployments in a pre-1.6 cluster (i.e. during the Setup phase), it needs to use the v1.5 deployment/util logic. In particular, the v1.5 logic does not filter children to only those with a matching ControllerRef.
**Which issue this PR fixes**:
Fixes#42738
**Special notes for your reviewer**:
**Release note**:
```release-note
```
cc @kubernetes/sig-apps-pr-reviews
When the upgrade test operates on Deployments in a pre-1.6 cluster
(i.e. during the Setup phase), it needs to use the v1.5 deployment/util
logic. In particular, the v1.5 logic does not filter children to only
those with a matching ControllerRef.
Automatic merge from submit-queue
Fix taint based pod eviction for clusters where controller manager is not running with allocate-node-cidrs set
Fixes https://github.com/kubernetes/kubernetes/issues/42733
In my cluster, I have not set allocate-node-cidr, and It is causing taint based pod eviction to fail.
@gmarek @kubernetes/sig-scheduling-bugs @davidopp @derekwaynecarr
Automatic merge from submit-queue (batch tested with PRs 38805, 42362, 42862)
Let GC print specific message for RESTMapping failure
Make the error messages reported in https://github.com/kubernetes/kubernetes/issues/39816 to be more specific, also only print the message once.
I'll also update the garbage collector's doc to clearly state we don't support tpr yet.
We'll wait for the watchable discovery feature (@sttts are you going to work on that?) to land in 1.7, and then enable the garbage collector to handle TPR.
cc @hongchaodeng @MikaelCluseau @djMax
Automatic merge from submit-queue (batch tested with PRs 42024, 42780, 42808, 42640)
kubectl: respect DaemonSet strategy parameters for rollout status
It handles "after-merge" comments from #41116
cc @kargakis @janetkuo
I will add one more e2e test later. I need to handle some in company stuff.
Automatic merge from submit-queue (batch tested with PRs 42024, 42780, 42808, 42640)
Node controller test flake 39975 with delay for try function
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes#39975
/cc @ncdc @gmarek @liggitt
Since the HPA controller pulls information from an external source that
makes no guarantees about consistency, it's possible for the HPA
to get into an infinite update loop -- if the metrics change with
every query, the HPA controller will run it's normal reconcilation,
post a status update, see that status update itself, fetch new metrics,
and if those metrics are different, post another status update, and
repeat. This can lead to continuously updating a single HPA.
By rate-limiting each HPA to once per sync interval, we prevent this
from happening.
The design of DaemonSet requires a relist before each phase (manage,
update, status) because it does not short-circuit and requeue for each
action triggered.
Automatic merge from submit-queue (batch tested with PRs 41890, 42593, 42633, 42626, 42609)
Remove everything that is not new from batch/v2alpha1
Fixes#37166.
@lavalamp you've asked for it
@erictune this is a prereq for moving CronJobs to beta. I initially planned to put all in one PR, but after I did that I figured out it'll be easier to review separately. ptal
@kubernetes/api-approvers @kubernetes/sig-api-machinery-pr-reviews ptal
Automatic merge from submit-queue (batch tested with PRs 42506, 42585, 42596, 42584)
RC/RS: Fix ignoring inactive Pods.
**What this PR does / why we need it**:
Fix typo that broke ignoring of inactive Pods in RC, and add unit test for that case.
**Which issue this PR fixes**:
Fixes#37479
**Special notes for your reviewer**:
**Release note**:
```release-note
```
Automatic merge from submit-queue (batch tested with PRs 42080, 41653, 42598, 42555)
StatefulSet: Respect ControllerRef
**What this PR does / why we need it**:
This is part of the completion of the [ControllerRef](https://github.com/kubernetes/community/blob/master/contributors/design-proposals/controller-ref.md) proposal. It brings StatefulSet into full compliance with ControllerRef. See the individual commit messages for details.
**Which issue this PR fixes**:
Fixes#36859
**Special notes for your reviewer**:
**Release note**:
```release-note
StatefulSet now respects ControllerRef to avoid fighting over Pods. At the time of upgrade, **you must not have StatefulSets with selectors that overlap** with any other controllers (such as ReplicaSets), or else [ownership of Pods may change](https://github.com/kubernetes/community/blob/master/contributors/design-proposals/controller-ref.md#upgrading).
```
cc @erictune @kubernetes/sig-apps-pr-reviews
Deployment should ignore Pods that don't match the selector, even if
they have a ControllerRef pointing to one of the ReplicaSets it owns.
The ReplicaSet itself will orphan the Pod as soon as it syncs.
The list functions in deployment/util are used outside the Deployment
controller itself. Therefore, they don't do actual adoption/orphaning.
However, they still need to avoid listing things that don't belong.
Although Deployment already applied its ControllerRef to adopt matching
ReplicaSets, it actually still used label selectors to list objects that
it controls. That meant it didn't actually follow the rules of
ControllerRef, so it could still fight with other controller types.
This should mean that the special handling for overlapping Deployments
is no longer necessary, since each Deployment will only see objects that
it owns (via ControllerRef).
Automatic merge from submit-queue (batch tested with PRs 31783, 41988, 42535, 42572, 41870)
controller: ensure deployment rollback is re-entrant
Make rollbacks re-entrant in the Deployment controller, otherwise
fast enqueues of a Deployment may end up in undesired behavior
- redundant rollbacks.
Fixes https://github.com/kubernetes/kubernetes/issues/36703
@kubernetes/sig-apps-bugs
Make rollbacks re-entrant in the Deployment controller, otherwise
fast enqueues of a Deployment may end up in undesired behavior
- redundant rollbacks.
Automatic merge from submit-queue
kubectl: respect deployment strategy parameters for rollout status
Fixes https://github.com/kubernetes/kubernetes/issues/40496
`rollout status` now respects the strategy parameters for a RollingUpdate Deployment. This means that it will exit as soon as minimum availability is reached for a rollout (note that if you allow maximum availability, `rollout status` will succeed as soon as the new pods are created)
@janetkuo @AdoHe ptal
Automatic merge from submit-queue
Small fix to the bootstrap TokenCleaner
Accidentally missed setting options and so the TokenCleaner was in a retry loop. Also moved from using an explicit timer over cached values vs. relying on a short resync timeout.
```release-note
```
Putting this in the 1.6 milestone as this is clearly a bug fix in a new feature.
Automatic merge from submit-queue (batch tested with PRs 42456, 42457, 42414, 42480, 42370)
In DaemonSet e2e test, don't check nodes with NoSchedule taints
Fixes#42345
For example, master node has a ismaster:NoSchedule taint. We don't expect pods to be created there without toleration.
cc @marun @lukaszo @kargakis @yujuhong @Random-Liu @davidopp @kubernetes/sig-apps-pr-reviews
Automatic merge from submit-queue (batch tested with PRs 42456, 42457, 42414, 42480, 42370)
controller: reduce log verbosity for deployments
Fixes https://github.com/kubernetes/kubernetes/issues/41187
Labeling as a bug fix since I think excessive logging should be considered as a bug.
@kubernetes/sig-apps-bugs
Accidentally missed setting options and so the TokenCleaner was in a retry loop. Also moved from using an explicit timer over cached values vs. relying on a short resync timeout.
Signed-off-by: Joe Beda <joe.github@bedafamily.com>
Automatic merge from submit-queue (batch tested with PRs 41306, 42187, 41666, 42275, 42266)
Implement bulk polling of volumes
This implements Bulk volume polling using ideas presented by
justin in https://github.com/kubernetes/kubernetes/pull/39564
But it changes the implementation to use an interface
and doesn't affect other implementations.
cc @justinsb
Automatic merge from submit-queue (batch tested with PRs 42365, 42429, 41770, 42018, 35055)
controller: statefulsets respect observed generation
StatefulSets do not update ObservedGeneration even though the API field is in place. This means that clients can never be sure whether the StatefulSet controller has observed the latest spec of a StatefulSet.
@kubernetes/sig-apps-bugs
This implements Bulk volume polling using ideas presented by
justin in https://github.com/kubernetes/kubernetes/pull/39564
But it changes the implementation to use an interface
and doesn't affect other implementations.
Automatic merge from submit-queue (batch tested with PRs 41984, 41682, 41924, 41928)
RC/RS: Fully Respect ControllerRef
**What this PR does / why we need it**:
This is part of the completion of the [ControllerRef](https://github.com/kubernetes/community/blob/master/contributors/design-proposals/controller-ref.md) proposal. It brings ReplicaSet and ReplicationController into full compliance with ControllerRef. See the individual commit messages for details.
**Which issue this PR fixes**:
Although RC/RS had partially implemented ControllerRef, they didn't use it to determine which controller to sync, or to update expectations. This could lead to instability or controllers getting stuck.
Ref: https://github.com/kubernetes/kubernetes/issues/24433
**Special notes for your reviewer**:
**Release note**:
```release-note
```
cc @erictune @kubernetes/sig-apps-pr-reviews
Automatic merge from submit-queue
HPA Controller: Use Custom Metrics API
This commit switches over the HPA controller to use the custom metrics
API. It also converts the HPA controller to use the generated client
in k8s.io/metrics for the resource metrics API.
In order to enable support, you must enable
`--horizontal-pod-autoscaler-use-rest-clients` on the
controller-manager, which will switch the HPA controller's MetricsClient
implementation over to use the standard rest clients for both custom
metrics and resource metrics. This requires that at the least resource
metrics API is registered with kube-aggregator, and that the controller
manager is pointed at kube-aggregator. For this to work, Heapster
must be serving the new-style API server (`--api-server=true`).
Before this merges, this will need kubernetes/metrics#2 to merge, and a godeps update to pull that in.
It's also semi-dependent on kubernetes/heapster#1537, but that is not required in order for this to merge.
**Release note**:
```release-note
Allow the Horizontal Pod Autoscaler controller to talk to the metrics API and custom metrics API as standard APIs.
```
Automatic merge from submit-queue
statefulset: wait for pvc cache sync
#42056 switched the statefulset controller to use the pvc shared informer/lister, but accidentally left out waiting for its cache to sync.
cc @kubernetes/sig-apps-pr-reviews @kargakis @foxish @kow3ns @smarterclayton @deads2k
Automatic merge from submit-queue
fix rsListerSynced and podListerSynced for DeploymentController
**What this PR does / why we need it**:
There is a mistake when initializing `DeploymentController`'s `rsListerSynced` and `podListerSynced` in `NewDeploymentController`, they are all initialized to `Deployment`'s `Informer`, so the `DeploymentController` maybe running before the `ReplicaSet` cache and `Pod` cache has been synced.
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes #
**Special notes for your reviewer**:
Indeed according unit test is neccessary, but this bug fix is simple, and if the tests is neccessary I will submit another PR later.
**Release note**:
```release-note
```
This commit switches over the HPA controller to use the custom metrics
API. It also converts the HPA controller to use the generated client
in k8s.io/metrics for the resource metrics API.
In order to enable support, you must enable
`--horizontal-pod-autoscaler-use-rest-clients` on the
controller-manager, which will switch the HPA controller's MetricsClient
implementation over to use the standard rest clients for both custom
metrics and resource metrics. This requires that at the least resource
metrics API is registered with kube-aggregator, and that the controller
manager is pointed at kube-aggregator. For this to work, Heapster
must be serving the new-style API server (`--api-server=true`).
Automatic merge from submit-queue (batch tested with PRs 41234, 42186, 41615, 42028, 41788)
apimachinery: handle duplicated and conflicting type registration
Double registrations were leading to duplications in `KnownKinds()`. Conflicting registrations with same gvk, but different types were not detected.
Automatic merge from submit-queue (batch tested with PRs 41234, 42186, 41615, 42028, 41788)
Make DaemonSet respect critical pods annotation when scheduling
**What this PR does / why we need it**: #41612
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes#41612
**Special notes for your reviewer**:
**Release note**:
```release-note
Make DaemonSet respect critical pods annotation when scheduling.
```
cc @kubernetes/sig-apps-feature-requests @erictune @vishh @liggitt @kargakis @lukaszo @piosz @davidopp
Automatic merge from submit-queue
Enforce Node Allocatable via cgroups
This PR enforces node allocatable across all pods using a top level cgroup as described in https://github.com/kubernetes/community/pull/348
This PR also provides an option to enforce `kubeReserved` and `systemReserved` on user specified cgroups.
This PR will by default make kubelet create top level cgroups even if `kubeReserved` and `systemReserved` is not specified and hence `Allocatable = Capacity`.
```release-note
New Kubelet flag `--enforce-node-allocatable` with a default value of `pods` is added which will make kubelet create a top level cgroup for all pods to enforce Node Allocatable. Optionally, `system-reserved` & `kube-reserved` values can also be specified separated by comma to enforce node allocatable on cgroups specified via `--system-reserved-cgroup` & `--kube-reserved-cgroup` respectively. Note the default value of the latter flags are "".
This feature requires a **Node Drain** prior to upgrade failing which pods will be restarted if possible or terminated if they have a `RestartNever` policy.
```
cc @kubernetes/sig-node-pr-reviews @kubernetes/sig-node-feature-requests
TODO:
- [x] Adjust effective Node Allocatable to subtract hard eviction thresholds
- [x] Add unit tests
- [x] Complete pending e2e tests
- [x] Manual testing
- [x] Get the proposal merged
@dashpole is working on adding support for evictions for enforcing Node allocatable more gracefully. That work will show up in a subsequent PR for v1.6
Automatic merge from submit-queue (batch tested with PRs 42053, 41282, 42056, 41663, 40927)
Fully remove hand-written listers and informers
Note: the first commit is from #41927. Adding do-not-merge for now as we'll want that to go in first, and then I'll rebase this on top.
Update statefulset controller to use a lister for PVCs instead of a client request. Also replace a unit test's dependency on legacylisters with the generated ones. cc @kargakis @kow3ns @foxish @kubernetes/sig-apps-pr-reviews
Remove all references to pkg/controller/informers and pkg/client/legacylisters, and remove those packages.
@smarterclayton @deads2k this should be it!
cc @gmarek @wojtek-t @derekwaynecarr @kubernetes/sig-scalability-pr-reviews
Automatic merge from submit-queue (batch tested with PRs 41814, 41922, 41957, 41406, 41077)
pv_controller: Do not report exponential backoff as error.
It's not an error when recycle/delete/provision operation cannot be started
because it has failed recently. It will be restarted automatically when
backoff expires.
This just pollutes logs without any useful information:
```
E0214 08:00:30.428073 77288 pv_controller.go:1410] error scheduling operaion "delete-pvc-1fa0e8b4-f2b5-11e6-a8bb-fa163ecb84eb[1fbd52ee-f2b5-11e6-a8bb-fa163ecb84eb]": Failed to create operation with name "delete-pvc-1fa0e8b4-f2b5-11e6-a8bb-fa163ecb84eb[1fbd52ee-f2b5-11e6-a8bb-fa163ecb84eb]". An operation with that name failed at 2017-02-14 08:00:15.631133152 -0500 EST. No retries permitted until 2017-02-14 08:00:31.631133152 -0500 EST (16s). Last error: "Cannot delete the volume \"11a4faea-bfc7-4713-88b3-dec492480dba\", it's still attached to a node".
```
```release-note
NONE
```
@kubernetes/sig-storage-pr-reviews
Automatic merge from submit-queue (batch tested with PRs 40932, 41896, 41815, 41309, 41628)
Make DaemonSets survive taint-based evictions when nodes turn unreachable/notReady
**What this PR does / why we need it**:
DaemonPods shouldn't be deleted by NodeController in case of Node problems.
This PR is to add infinite tolerations for Unreachable/NotReady NoExecute Taints, so that they won't be deleted by NodeController when a node goes unreachable/notReady.
**Which issue this PR fixes** :
fixes#41738
Related PR: #41133
**Special notes for your reviewer**:
**Release note**:
```release-note
Make DaemonSets survive taint-based evictions when nodes turn unreachable/notReady.
```
Automatic merge from submit-queue (batch tested with PRs 40932, 41896, 41815, 41309, 41628)
Modify CronJob API to add job history limits, cleanup jobs in controller
**What this PR does / why we need it**:
As discussed in #34710: this adds two limits to `CronJobSpec`, to limit the number of finished jobs created by a CronJob to keep.
**Which issue this PR fixes**: fixes#34710
**Special notes for your reviewer**:
cc @soltysh, please have a look and let me know what you think -- I'll then add end to end testing and update the doc in a separate commit. What is the timeline to get this into 1.6?
The plan:
- [x] API changes
- [x] Changing versioned APIs
- [x] `types.go`
- [x] `defaults.go` (nothing to do)
- [x] `conversion.go` (nothing to do?)
- [x] `conversion_test.go` (nothing to do?)
- [x] Changing the internal structure
- [x] `types.go`
- [x] `validation.go`
- [x] `validation_test.go`
- [x] Edit version conversions
- [x] Edit (nothing to do?)
- [x] Run `hack/update-codegen.sh`
- [x] Generate protobuf objects
- [x] Run `hack/update-generated-protobuf.sh`
- [x] Generate json (un)marshaling code
- [x] Run `hack/update-codecgen.sh`
- [x] Update fuzzer
- [x] Actual logic
- [x] Unit tests
- [x] End to end tests
- [x] Documentation changes and API specs update in separate commit
**Release note**:
```release-note
Add configurable limits to CronJob resource to specify how many successful and failed jobs are preserved.
```
Automatic merge from submit-queue (batch tested with PRs 41854, 41801, 40088, 41590, 41911)
Add storage.k8s.io/v1 API
v1 API is direct copy of v1beta1 API. This v1 API gets installed and exposed in this PR, I tested that kubectl can create both v1beta1 and v1 StorageClass.
~~Rest of Kubernetes (controllers, examples,. tests, ...) still use v1beta1 API, I will update it when this PR gets merged as these changes would get lost among generated code.~~ Most parts use v1 API now, it would not compile / run tests without it.
**Release note**:
```
Kubernetes API storage.k8s.io for storage objects is now fully supported and is available as storage.k8s.io/v1. Beta version of the API storage.k8s.io/v1beta1 is still available in this release, however it will be removed in a future Kubernetes release.
Together with the API endpoint, StorageClass annotation "storageclass.beta.kubernetes.io/is-default-class" is deprecated and "storageclass.kubernetes.io/is-default-class" should be used instead to mark a default storage class. The beta annotation is still working in this release, however it won't be supported in the next one.
```
@kubernetes/sig-storage-misc
Automatic merge from submit-queue (batch tested with PRs 41714, 41510, 42052, 41918, 31515)
Switch scheduler to use generated listers/informers
Where possible, switch the scheduler to use generated listers and
informers. There are still some places where it probably makes more
sense to use one-off reflectors/informers (listing/watching just a
single node, listing/watching scheduled & unscheduled pods using a field
selector).
I think this can wait until master is open for 1.7 pulls, given that we're close to the 1.6 freeze.
After this and #41482 go in, the only code left that references legacylisters will be federation, and 1 bit in a stateful set unit test (which I'll clean up in a follow-up).
@resouer I imagine this will conflict with your equivalence class work, so one of us will be doing some rebasing 😄
cc @wojtek-t @gmarek @timothysc @jayunit100 @smarterclayton @deads2k @liggitt @sttts @derekwaynecarr @kubernetes/sig-scheduling-pr-reviews @kubernetes/sig-scalability-pr-reviews
Automatic merge from submit-queue (batch tested with PRs 41714, 41510, 42052, 41918, 31515)
controller: fix requeueing progressing deployments
Drop the secondary queue and add either ratelimited or after the
required amount of time that we need to wait directly in the main
queue. In this way we can always be sure that we will sync back
the Deployment if its progress has yet to resolve into a complete
(NewReplicaSetAvailable) or TimedOut condition.
This should also simplify the deployment controller a bit.
Fixes https://github.com/kubernetes/kubernetes/issues/39785. Once this change soaks, I will move the test out of the flaky suite.
@kubernetes/sig-apps-misc
Automatic merge from submit-queue (batch tested with PRs 41667, 41820, 40910, 41645, 41361)
Refactor ControllerRefManager
**What this PR does / why we need it**:
To prepare for implementing ControllerRef across all controllers (https://github.com/kubernetes/community/pull/298), this pushes the common adopt/orphan logic into ControllerRefManager so each controller doesn't have to duplicate it.
This also shares the adopt/orphan logic between Pods and ReplicaSets, so it lives in only one place.
**Which issue this PR fixes**:
**Special notes for your reviewer**:
**Release note**:
```release-note
```
cc @kubernetes/sig-apps-pr-reviews
Automatic merge from submit-queue (batch tested with PRs 41667, 41820, 40910, 41645, 41361)
Allow multiple mounts in StatefulSet volume zone placement
We have some heuristics that ensure that volumes (and hence stateful set
pods) are spread out across zones. Sadly they forgot to account for
multiple mounts. This PR updates the heuristic to ignore the mount name
when we see something that looks like a statefulset volume, thus
ensuring that multiple mounts end up in the same AZ.
Fix#35695
```release-note
Fix zone placement heuristics so that multiple mounts in a StatefulSet pod are created in the same zone
```
Where possible, switch the scheduler to use generated listers and
informers. There are still some places where it probably makes more
sense to use one-off reflectors/informers (listing/watching just a
single node, listing/watching scheduled & unscheduled pods using a field
selector).
Automatic merge from submit-queue (batch tested with PRs 41146, 41486, 41482, 41538, 41784)
Switch statefulset controller to shared informers
Originally part of #40097
I *think* the controller currently makes a deep copy of a StatefulSet before it mutates it, but I'm not 100% sure. For those who are most familiar with this code, could you please confirm?
@beeps @smarterclayton @ingvagabund @sttts @liggitt @deads2k @kubernetes/sig-apps-pr-reviews @kubernetes/sig-scalability-pr-reviews @timothysc @gmarek @wojtek-t
Automatic merge from submit-queue (batch tested with PRs 38957, 41819, 41851, 40667, 41373)
Fix deployment helper - no assumptions on only one new ReplicaSet
#40415
**Release note**:
```release-note
NONE
```
@kubernetes/sig-apps-bugs
Conversions can mutate the underlying object (and ours were).
Make a deepcopy before our first conversion at the very start
of the reconciler method in order to avoid mutating the shared
informer cache during conversion.
Fixes#41768
