This extends migration to also support paused VMs, preserving the
paused state on the destination.
Changes:
- Add CompletePaused protocol command that finalizes migration without
resuming the VM on the destination
- Skip the pause step during migration if the VM is already paused
- On migration failure, only restore the running state if
the VM was originally running (not paused)
Signed-off-by: Nguyen Dinh Phi <phind.uet@gmail.com>
`get_host_address_range` used `check_range(addr, size)` as a guard then
unwrapped `get_slice(addr, size)`. This allowed a span across two
regions to hit the unwrap (get_slice limits to one range).
If `size` were zero, then the checks were all skipped. Causing a panic
later on for an invalid address.
Make get_slice the sole authority and reject size==0 explicitly.
Callers already handle None.
Signed-off-by: Dylan Reid <dgreid@fb.com>
The guest can cause submit and completion failures with malformed chains
or invalid addresses. However, this shouldn't permanently stall the
device and terminate the worker.
Genuine reset-worthy failures set needs_reset and return `Ok` anyways
and will more cleanly reset the worker.
Signed-off-by: Dylan Reid <dgreid@fb.com>
process_queue_submit's drain loop builds a fresh queue.iter() per
iteration, which re-reads the guest avail index on every call and has
no per-call cap (the per-iter gap check in virtio-queue only protects
against avail_idx jumping more than queue_size between two reads).
In theory, a malicous or buggy guest could keep adding descriptors and
cause this loop to overflow the iouring submit queue.
Cap a single drain at queue_size. A spec-compliant driver never
produces more than queue_size outstanding entries simultaneously, so
the cap is invisible to well-behaved guests.
Signed-off-by: Dylan Reid <dgreid@fb.com>
Add validation checks to prepare_linux() to catch invalid
kernel option combinations early:
- Error if --build-guest-kernel and CH_CUSTOM_KERNEL are
both provided, as they are mutually exclusive.
- On x86_64, error if only one of CH_CUSTOM_KERNEL or
CH_CUSTOM_BZIMAGE is set; both must be provided together.
- Fix kernel-already-present check: use per-architecture
branches with correct bash syntax (elif instead of
else-if, [[ ]] instead of [ && ]) so aarch64 and x86_64
are each handled properly.
Signed-off-by: Muminul Islam <muislam@microsoft.com>
Add docs/testing.md covering the dev_cli.sh interface, all
test types (unit, integration, VFIO, Windows, live migration,
rate limiter, CVM), custom kernel/firmware overrides via
environment variables, performance metrics, code coverage,
and the CI workflow matrix.
Assisted-by: GitHub Copilot:Claude-Opus-4.6
Signed-off-by: Muminul Islam <muislam@microsoft.com>
Add file-existence guards around firmware and OVMF download
calls in integration test scripts that were missing them.
Also guard prepare_linux() in test-util.sh so it returns
early when the kernel binary is already present.
This lets users pre-populate the workloads directory (e.g.
via CH_CUSTOM_KERNEL, CH_CUSTOM_FIRMWARE, CH_CUSTOM_OVMF)
and avoid redundant network fetches or source builds inside
the container.
Updated scripts:
- test-util.sh (prepare_linux early return)
- run_integration_tests_aarch64.sh
- run_integration_tests_vfio.sh
- run_integration_tests_windows_x86_64.sh
- run_integration_tests_windows_aarch64.sh
Assisted-by: GitHub Copilot:Claude-Opus-4.6
Signed-off-by: Muminul Islam <muislam@microsoft.com>
Skip sha1sum verification for firmware files that were
provided via CH_CUSTOM_FIRMWARE or CH_CUSTOM_OVMF environment
variables. Custom files will not match the expected checksums,
so we filter them out of the sha1sums list before running
sha1sum --check.
Updated scripts:
- run_integration_tests_x86_64.sh
- run_integration_tests_aarch64.sh
Assisted-by: GitHub Copilot:Claude-Opus-4.6
Signed-off-by: Muminul Islam <muislam@microsoft.com>
When CH_CUSTOM_KERNEL, CH_CUSTOM_FIRMWARE, or CH_CUSTOM_OVMF
environment variables are set, copy the referenced files into
the host workloads directory before starting Docker. The files
land at the default paths the test scripts expect
(vmlinux-x86_64, Image-arm64, hypervisor-fw, CLOUDHV.fd,
CLOUDHV_EFI.fd), so the existing download-if-missing guards
inside the container skip the network fetch.
Each variable is independent; users can override any
combination without affecting the others.
Assisted-by: GitHub Copilot:Claude-Opus-4.6
Signed-off-by: Muminul Islam <muislam@microsoft.com>
Extract a common_env_args bash array with the environment
variables shared by both unit and integration test containers
(BUILD_TARGET, RUSTFLAGS, TARGET_CC). The unit test block
uses common_env_args plus its own LLVM_PROFILE_FILE. After
the unit block, common_env_args is extended with the USER
and AUTH_DOWNLOAD_TOKEN variables used by all integration
test groups.
Assisted-by: GitHub Copilot:Claude-Opus-4.6
Signed-off-by: Muminul Islam <muislam@microsoft.com>
Extract a common_args bash array with the runtime arguments
shared by both unit and integration test containers (name,
workdir, rm, seccomp, volumes). The unit test block uses
common_args plus its own device and cap-add flags. After
the unit block, common_args is extended with the privileged,
ipc, net, tmpfs, and workload-volume flags used by all
integration test groups.
Assisted-by: GitHub Copilot:Claude-Opus-4.6
Signed-off-by: Muminul Islam <muislam@microsoft.com>
KSM will not attempt to merge pages that are mapped as MAP_SHARED, so
configuring memory with both mergeable and shared options is invalid.
Add validation to reject configurations where both options are enabled
for memory or memory zones.
Signed-off-by: Rob Bradford <rbradford@meta.com>
With the `mshv` feature enabled, the immutable `data` `Vec` is mutated
via a pointer. This violates Rust aliasing rules. Fixed by cloning the
`Vec` to a mutable instance when the `mshv` feature is active.
Signed-off-by: Julian Schindel <mail@arctic-alpaca.de>
Add KvmSevSnpIdBlock and KvmSevSnpIdAuth structs matching the AMD
SEV-SNP Firmware ABI Spec (Rev 1.58), and build them from the IGVM
SNP ID block directive during launch finish. This properly populates
id_block_uaddr/id_auth_uaddr in KVM_SEV_SNP_LAUNCH_FINISH and derives
auth_key_en from the assembled author key, matching QEMU's behavior.
Thread the guest policy from sev_snp_init to launch_finish via an
atomic on KvmVm so the ID block gets the correct policy value.
Also track has_snp_id_block in IgvmLoadedInfo to enable the ID block
based on whether the IGVM file actually contains one, rather than
hardcoding it for KVM.
Signed-off-by: Ruben Hakobyan <hruben@meta.com>
Extract the SNP guest policy from IGVM initialization headers when
available, falling back to the default policy. This matches QEMU's
behaviour where only a non-zero IGVM policy overrides the default.
Signed-off-by: Ruben Hakobyan <hruben@meta.com>
Preserve the original IGVM import order for KVM SNP launch updates.
The launch digest is order-sensitive, so only coalesce adjacent pages
that already share the same page type and size. MSHV continues to
sort by GPA for hypercall batching.
Signed-off-by: Kevin Hui <kevinhui@meta.com>
Introduce the KVM_SNP_PAGE_TYPE_ZERO page type for ZERO
pages. AMD SEV SNP can accept ZERO pages as a page in which
the page memory is functionally just zeroes
Signed-off-by: Kevin Hui <kevinhui@meta.com>
Verify the SEV hash table layout, GUID placement, kernel/initrd/cmdline
digest values, and the setup_sects > boot_params size branch. These
guard against silent regressions in the launch digest computation.
Signed-off-by: Kevin Hui <kevinhui@meta.com>
This introduces the kernel hashes measured boot table into
cloud hypervisor if a cmdline and kernel is passed into an
SEV-SNP CVM, incorporating a kernel/cmdline/optional initrd
into a memory page that is measured into the launch digest
of a SEV-SNP CVM. If both --kernel and --cmdline are not
provided, we do not insert this data page
Signed-off-by: Kevin Hui <kevinhui@meta.com>
For KVM SEV-SNP guests, the VMM should not modify the kernel
boot header before sending it via fw_cfg. The guest firmware is expected
to set fields like type_of_loader itself.
For upcoming measured boot logic for SEV-SNP, modifying `type_of_loader`
causes the kernel hash computed by the VMM to diverge from the hash that
`sev-snp-measure` (and the guest firmware) compute, resulting in a
launch measurement mismatch.
This matches QEMU's behavior, which skips kernel header modifications
for confidential guests so the data sent via fw_cfg matches the
original kernel file provided by the user.
Signed-off-by: Ruben Hakobyan <hruben@meta.com>
Walk the input snapshot file extent by extent via lseek(SEEK_DATA) /
lseek(SEEK_HOLE) within each region's slot and read only those bytes
into guest RAM via the existing read_volatile_from primitive. Holes are
left as the guest mapping's natural zero-fill, which matches the source
content.
Symmetric counterpart to sparse-write on snapshot. Works for both new
sparse snapshots and old dense snapshots: a dense file has no holes, so
SEEK_DATA returns the full range as one extent and the I/O pattern
matches the previous behaviour.
If the input file's filesystem does not support SEEK_HOLE the code falls
back to the existing dense read path.
Measured on a 4 GiB shared-memory VM (2 vCPUs, ~340 MiB touched), total
restore time as reported by the in-tree timing instrumentation:
Before (dense): ~1487ms, reads 4.0 GiB from file
After (sparse): ~136ms, reads 340 MiB from file (92% less I/O, 11x faster)
Assisted-by: Claude:Opus-4.7
Signed-off-by: Rob Bradford <rbradford@meta.com>
For memfd-backed guest RAM regions, walk the backing fd extent by extent
via lseek(SEEK_DATA) / lseek(SEEK_HOLE) and write each populated extent
into the snapshot file's per-region slot via
std::os::unix::fs::FileExt::write_at. Pre-size the file with
set_len(total): on filesystems that support sparse files unwritten bytes
become real holes; on others the kernel zero-fills the allocation, which
is still byte-correct.
If set_len fails (some FUSE backends reject ftruncate-extend with
EOPNOTSUPP), fall back entirely to the dense write path which streams
bytes sequentially via write_volatile_to and never writes past the
growing EOF.
When the guest region has no backing file (anonymous mmap) or the
backing fd does not support SEEK_HOLE (hugetlbfs), fall back to the
dense write path on a per-region basis.
The on-disk byte stream is identical to the dense format from the
perspective of any reader using read/pread/mmap, so old readers see no
change.
Measured on a 4 GiB shared-memory VM (2 vCPUs, ~340 MiB touched), total
snapshot time as reported by the in-tree timing instrumentation:
Before (dense): ~2400ms, 4.0 GiB on disk
After (sparse): ~132ms, 340 MiB on disk (92% smaller, 18x faster)
Assisted-by: Claude:Opus-4.7
Signed-off-by: Rob Bradford <rbradford@meta.com>
Adds next_data_extent: a streaming helper that returns the next
populated extent within a window of a file descriptor using
lseek(SEEK_DATA) / lseek(SEEK_HOLE). Used by subsequent commits to walk
the snapshot file extent-by-extent without collecting the full extent
list.
Returns an error on fds or filesystems without SEEK_HOLE support so the
caller can fall back to a dense write path.
Assisted-by: Claude:Opus-4.7
Signed-off-by: Rob Bradford <rbradford@meta.com>
Replace explicit --kernel and --cmdline arguments with the
default_kernel_cmdline() helper in performance_net_throughput,
performance_net_latency, and performance_block_io. This
simplifies the code and ensures consistency with how the
kernel command line is configured across tests.
Signed-off-by: Muminul Islam <muislam@microsoft.com>
Confidential VMs (CVM) are not currently supported on the
AArch64 architecture. Add an early check in the performance
metrics binary to exit with a clear error message when CVM
mode is selected on AArch64.
Signed-off-by: Muminul Islam <muislam@microsoft.com>
Add a --vm-type command-line argument to allow users to select
between 'regular' (default) and 'confidential' (CVM) VM types
when running performance tests.
Example: --vm-type confidential
Signed-off-by: Muminul Islam <muislam@microsoft.com>
Apply the vm_type override from PerformanceTestOverrides to the
effective_control used during test execution, alongside the
existing test_timeout override.
Signed-off-by: Muminul Islam <muislam@microsoft.com>
Add an optional vm_type field to PerformanceTestOverrides to
allow overriding the VM type at runtime. Include vm_type in
the Display output for override logging.
Signed-off-by: Muminul Islam <muislam@microsoft.com>
Replace hardcoded GuestVmType::Regular with control.vm_type
in all performance test functions to support CVM benchmarking:
net_throughput, net_latency, boot_time, boot_time_pmem,
block_io, and restore_latency.
Signed-off-by: Muminul Islam <muislam@microsoft.com>
Update performance_test_new_guest() to accept a GuestVmType
parameter. When set to Confidential, configure the guest with
CVM-specific settings: vm_type, boot_timeout, and nested
virtualization disabled.
All callers pass GuestVmType::Regular to preserve existing
behavior.
Signed-off-by: Muminul Islam <muislam@microsoft.com>
Add a vm_type field of type GuestVmType to PerformanceTestControl,
defaulting to GuestVmType::Regular. Include vm_type in the Display
output for test control logging.
Signed-off-by: Muminul Islam <muislam@microsoft.com>
Consolidate override application into a single effective_control
variable built once before the test loop. This removes duplicated
timeout override logic from both warmup and measurement iterations.
Signed-off-by: Muminul Islam <muislam@microsoft.com>
Add Display trait implementation for GuestVmType to enable
formatted output of the VM type in logs and diagnostics.
Signed-off-by: Muminul Islam <muislam@microsoft.com>
Add FromStr trait implementation for GuestVmType to enable
parsing from CLI string arguments. Supports "regular" and
"confidential" string values.
Signed-off-by: Muminul Islam <muislam@microsoft.com>
Update mshv-bindings and mshv-ioctls from 0.6.8 to 0.6.9
in workspace Cargo.toml and fuzz/Cargo.toml.
Signed-off-by: Muminul Islam <muislam@microsoft.com>
