Newer rust std libary code checks if a fd is already closes and panics.
Test code created a file with fd=17 and relied that test code never
touched the file. This cannot be done anymore. Just use the working dir
as backing file.
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
`sizeof` was added into the prelude in rustc 1.80.
This triggers a lint-warning for `unused_qualifications` if rustc 1.80+
is used. Fix this warning by using a use statement to stay compatible
for <1.80.
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The RCs 30, 31, 32 may be caused by a malicious host or host bug.
Make this clear and advise to stop the SE-guest.
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
When checking CDL formatted DASD for installed dump-tool (zgetdump -d),
we might stumble upon an 'empty' boot record pointer in the volume label
filled with bytes of 0x40 (EBCDIC spaces). This leads to the following
seek error reported:
# zgetdump -d /dev/dasdb
zgetdump: Could not seek "/dev/dasdb" (Invalid argument)
Check for empty boot record and return proper error code by
ngdump_get_eckd_part_num() in order to end up with a regular
"No dump tool found" message.
Fixes: f3bcd94524 ("zdump: Add zgetdump -d support for ECKD ldipl-dump")
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This fixes a segfault when the option '--dry-run' is specified for
device-based dumps (for which the bootmap file is created on a RAW
device, not formatted with a file system).
The actual status is that the option '--dry-run' for device-based
dumps is not implemented. The implementation is evaluated as not
trivial: In contrast with filesystem-based dumps, it is not possible
to simply make do with rename/unlink of temporary created bootmap.
The fixup returns error on any not file system based dumps being
created with the option '--dry-run'.
Signed-off-by: Eduard Shishkin <edward6@linux.ibm.com>
Reviewed-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Drop a pair of duplicated assignmets
Replace the parameter 'struct job_data' with 'struct job_dump_data'
Signed-off-by: Eduard Shishkin <edward6@linux.ibm.com>
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Move all checks from check_dump_device_late() to disk_is_approproate()
and drop check_dump_device_late() entirely
Signed-off-by: Eduard Shishkin <edward6@linux.ibm.com>
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
In the function check_dump_device_late() drop the case of
(info->device != target_info->device) which never happens. Indeed,
the @info created in check_dump_device_late() coincides with the
@target_info previously created by
prepare_build_program_table_{file, device}.
Signed-off-by: Eduard Shishkin <edward6@linux.ibm.com>
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Since the following kernel commit:
"32db401965f1 s390/mm: Pin identity mapping base to zero"
we can have zero identity_base value in os_info. This makes zgetdump
check for non-VR kernel in vm_info_get() incorrect what leads to missing
data (e.g. UTS kernel version) in 'zgetdump -i' output.
Check for zero kaslr_offset value instead (like crash and makedumpfile
do) in order to identify non-VR kernel.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Since memory chunks can overlap for vr-kernel dumps stored in elf
format (ngdump, zfcpdump), we need to consider this when converting to
s390 dump output format. For that sort DFI memory chunks by start
address and adjust dfo_s390 logic for identifying memory gaps.
Otherwise we might end up with bogus DFO memory chunks being created.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
On vertical polarization, kernel can be adjusting CPU capacities
dynamically, and cpuplugd can interfere this with hotplug operations
causing performance degradation. To prevent this, check if system has
switched its polarization state, and act accordingly.
If system is on vertical polarization when daemon starts, no CPU hotplug
action is triggered. If system changes to vertical polarization during
daemon runtime, revert cpuhotplug adjustments and stop further CPU
hotplug actions. If system switches back to horizontal polarization
during runtime of the daemon, start evaluating CPU hotplug rules and
trigger adjustments.
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Simplify the cpu management parts of cpuplugd code by introducing
functions from libutil and rework some logic to drop some assumptions
about how kernel assigns cpuids.
Right now cpuplugd assumes that the cpuids are always sequential and
there are no gaps in between, however kernel does not guarantee that.
Make cpuplugd compliant by traversing cpu sysfs entries instead.
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This fixes c0f02d2f6 which results in problems when preparing qcow2
images for IPL:
zipl -V --blsdir /tmp/tmp.kdPooQjoBh/boot//loader/entries/ --config /
Program terminated with signal SIGFPE, Arithmetic exception.
Don't use pointer to not initialized struct disk_info after failed
auto-detection of disk parameters. Make the check that the file
locates on the disk in the form of a separate procedure.
Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Eduard Shishkin <edward6@linux.ibm.com>
Acked-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Tested-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
When detecting disk type, the function disk_get_info() is called.
It can fail for various reasons (e.g. when the logial target is not
eligible for boot record installation).
Once disk_get_info() fails, don't proceed with type detection.
Return error instead. When applicable, mark the dump job with
"is_ngdump" flag to avoid extra type detection calls.
Acked-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Signed-off-by: Eduard Shishkin <edward6@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This fixes d6b702d57 which introduces a problem: SCSI dump
installation fails:
zipl -V -d /dev/mapper/mpathd1
Error: Invalid dump device: Could not read partition table
The reasons:
1) Wrong (logical) device is passed as a target base;
2) In case of 'source_script' the check to make sure that specified
target is over a partition isn't applicable any more after zipl
support of complex logical targets (e.g. mirrors).
The fixup passes the physical device as a target base (instead of
the logical one). Also the fixup removes invalid check from
check_dump_device_late() and instead adds a more generic check to
the helper script that data starts beyong the boot area.
Reported-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Eduard Shishkin <edward6@linux.ibm.com>
Tested-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This option is experimental, but can still be useful.
While at it, sort the options alphabetically.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This fixes 670bf3e8 which actually isn't an equivalent refactoring.
The generic dm-device resolution procedure was modified to not resolve
the topmost dm-device in the path. So that any calles who don't expect
it, should complete the resolutioin process by themselves. In case of
chreipl_helper such completion was missed. chreipl(8) utility doesn't
expect dm-devices at the output of chreipl_helper.device-mapper
Example:
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 20G 0 disk
|-sda1 8:1 0 20G 0 part
`-mpathb 253:0 0 20G 0 mpath
`-mpathb1 253:2 0 20G 0 part /
sdb 8:16 0 20G 0 disk
|-sdb1 8:17 0 20G 0 part
`-mpathb 253:0 0 20G 0 mpath
`-mpathb1 253:2 0 20G 0 part /
Expected result:
8:16
Actual result:
253:0
As a result, the chreipl(8) "node" option stopped working.
The fixup adds the completion.
Reported-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Eduard Shishkin <edward6@linux.ibm.com>
Tested-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The .note.package [1] section is not used by the zipl/genprotimg bootloaders,
therefore discard them via linker script.
This fix solves the error:
/usr/bin/ld: Heap section doesn't conform to the described memory layout
collect2: error: ld returned 1 exit status
make[4]: *** [Makefile:77: stage3a.elf] Error 1
make[4]: Leaving directory '/<>/genprotimg/boot'
make[3]: *** [Makefile:20: all-recursive] Error 1
make[3]: Leaving directory '/<>/genprotimg'
make[2]: *** [Makefile:56: genprotimg] Error 2
[1] https://systemd.io/ELF_PACKAGE_METADATA/
Fixes: https://github.com/ibm-s390-linux/s390-tools/issues/174
Closes: https://github.com/ibm-s390-linux/s390-tools/pull/176
[seiden@linux.ibm.com: Add/edit fixes tags]
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Frank Heimes <frank.heimes@canonical.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Introduce target operations (struct target_ops);
For each supported device-mapper target implement
. check_target_status()
. get_target_data()
Add support for new 'raid' device-mapper target, which is now default
in LVM.
Signed-off-by: Eduard Shishkin <edward6@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Add a script to process mirrored zipl targets managed by Linux "md"
driver (AKA "software mirrors")
. In the file zipl_helper.device-mapper.c implement two handlers
identified by pairs (ZIPL_UTIL_ID, MD_DRIVER_ID) and
(CHREIPL_UTIL_ID, MD_DRIVER_ID) for the helpers zipl_helper.md
and chreipl_helper.md respectively
. zipl_helper.md: prints sets of target parameters (one such set
per mirror) for a specified logical zipl target managed by linux
"md" driver.
. chreipl_helper.md: for a specified logical zipl target managed
by linux "md" driver prints a random disk from the set of disks
participating in the mirrored setup.
. Add zipl_helper.md and chreipl_helper.md as symbolic links to
zipl_helper.device-mapper
Signed-off-by: Eduard Shishkin <edward6@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
For "mirror" device-mapper targets:
. Check status of all the mirrors;
. Return error if some mirror contain failures;
. Align the sample output properly
Signed-off-by: Eduard Shishkin <edward6@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
For "mirror" device-mapper targets:
. Don't assign a logical mirrored device as a zipl target base.
Instead, add one more branch in complete_physical_device() and
proceed (in that new branch) to the physical disk participating
in the mirrored target. This approach allowes to handle
heterogeneous mirrors properly;
. Provide a set of target parameters for each found physical disk
by calling dm_dev_to_zipl_params() recursively;
. Don't allow "nested mirrors" by checking/updating the
fail_on_mirror global;
. Remove the requirements on including block #0 to the mirrored
device-mapper setup (no more actual);
. Update comments.
Signed-off-by: Eduard Shishkin <edward6@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
This is used by the next patches in the series to support mirror
setups not including boot sectors (e.g. mirrors over partitions).
. Rework the core procedure of device resolution (by walking along
the device-mapper tree during logical device resolution) to be an
explicit sequence of pairs (level-lookup, goto-parent-level);
. Add an "extended" device to keep a track of file system offset
while ascending the device tree;
. Identify all possible results of a single level lookup;
. Rename target_entry to dmpath_entry;
. Make the main() function to look like a call of a handler
identified by a pair (driver-id, util-id) and found by the name
of the executable.
Signed-off-by: Eduard Shishkin <edward6@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Fix mistake in @fs_offset calculation.
Since any logical dm-device can be built of partitions, @fs_offset
must not decrease while ascending the "device tree" during the
procedure of dm-device resolution (which always starts at the
formatted logical device, for which @fs_offset is 0).
This bug was not reproducible earlier because of restricted
functionality in a combination with side-effects. The fixup is
required however by the next patches in the series implementing
support of mirrored targets by zipl tool
Signed-off-by: Eduard Shishkin <edward6@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
. Modify disk_get_info() to process multiple sets of target parameters
provided by the helper script and store it in the array of "targets"
of the structure job_target_data;
. Besides the logical device, maintain an array of physical base disks
in the disk_info structure;
. Use the logical target device only to create bootmap (it is
automatically mirrored by the respective linux driver (dm, or md)
managing the mirrored target). In contrast, install bootstrap blocks
to each physical base disk individually, bypassing that driver;
. Report in verbose mode on which base disks the bootstrap
installation was performed;
. Use the following logic of setting @info->device (which is printed
as "Device...:" in verbose mode):
. source_auto - the target base disk is set;
. source_script - the target (logical) device is set;
. source_user - the device specified by user (via --targetbase
option), or config file is set.
Signed-off-by: Eduard Shishkin <edward6@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Add new command-line option --ipldev. When specified and IPL was done
from a supported device type, the IPL device is selected for the
requested tool operation.
Example to list IPL device information:
$ lszdev --ipldev
Example to create a persistent configuration for the IPL device:
$ chzdev --enable --persistent --ipldev
Reviewed-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reduce code complexity by adding a utility function for reading text
files based on a variable path.
Note: chzdev/lszdev tools apply special path-handling via command line
option --base to allow redirecting hard-coded paths therefore libutil's
util_file functions cannot easily be used.
Reviewed-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Steps to reproduce: Prepare some disk for IPL, specifying its
parameters via zipl "target options", and an image IMAGE_NAME
located on another disk. Don't specify "-a" option.
Actual result: Installation succeeded (resulting in unbootable setup)
Expected result: "Error: Could not add image file 'IMAGE_NAME': File
is not on target device"
The problem is in incorrect evaluation of device number (dev_t)
of the base disk where the image is located by the function
add_component_file_range() in case when target parameters are
specified by user.
Fixup: Retrieve info of the underlying disk without any user hints,
passing zeroed structure job_target_data
This is an improved version of fb0b6263d that was reverted by
63ff07ba3 afterwards. The shortcoming of the original ( fb0b6263d )
fix: it fails to prepare for IPL mounted qcow2 images.
The difference from the original fix: when making sure that boot
files are located on the target disk: in case of failed auto-detection
of disk parameters skip the check with warnings instead of aborting
the whole installation session.
Acked-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Eduard Shishkin <edward6@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
MSA 10 and MSA 11 introduce new function codes containing Full XTS
functions for KM instruction and HMAC functions for KMAC instruction.
Additional Full XTS and HMAC for PCKMO instruction is introduced.
Signed-off-by: Finn Callies <fcallies@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Perl logs warning message if a variable is not initialized.
get_device_data() set mp_dev with multipath device for a scsi disk device.
mp_dev remain uninitialized if there is no multipath device.
This can happen if a scsi device is not managed by dm multipath driver.
Warning message:
"Use of uninitialized value in subroutine entry at /usr/sbin/ziorep_config line 136"
Fix it by skipping the code dealing with mp_dev and continue with next
scsi device in the loop.
To reproduce, remove a scsi device from dm multipath.
$multipathd -k'del path sdh'
Then run `ziorep_config -D`.
Signed-off-by: Nihar Panda <niharp@linux.ibm.com>
Reviewed-by: Fedor Loshakov <loshakov@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
We changed lscss for more detailed output.
Adding use of dasdview for a detailed view on DASD storage.
This data will be collected in a separate file, as many DASDs might flood
the runtime.out
Also updated man pages as a new step is added
Reviewed-by: Stefan Hberland <sth@linux.ibm.com>
Signed-off-by: Joern Siglen <siglen@de.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The ap.rs code is already prepared for possible support
for CCA mode APQNs for the Secure Execution environment.
However, this patch marks these fields and structs with
pragma allow(dead_code) to prevent warnings during cargo
build of pvapconfig.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add a new action type 'capabilities' for the 'get' event. This
will return a JSON list of events and actions that the callout
script recognizes and actually does something with. It omits
events like 'notify' and actions like 'list' that ap-check
currently ignores.
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
mdevctl introduces a new event type 'live' with action 'modify',
indicating that the specified configuration changes should be
made dynamically if possible. Use this as a trigger to perform
dynamic configuration changes to the specified vfio-ap device
if it is active.
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Anthony Krowiak <akrowiak@linux.ibm.com>
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
While unlikely, it is possible for a vfio-ap configuration JSON
to include the 'ap_config' attribute. In this case, process it
by overwriting the current list of adapters, domains and control
domains for the associated vfio-ap device struct.
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Anthony Krowiak <akrowiak@linux.ibm.com>
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
For a given vfio-ap mdev, determine whether or not the device will
need dynamic config operations. This boils down to whether or not
the device is currently active + whether or not the kernel is
detected to support dynamic config operations (via the
'ap_config' sysfs attribute).
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Anthony Krowiak <akrowiak@linux.ibm.com>
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The qeth-udev-rule execution logs a warning as below in the journalfs.
Failed to write ATTR{/sys/bus/ccwgroup/drivers/qeth/group}, \
ignoring: Invalid argument
This occurs because the udev rule for qeth devices is triggered by
multiple ccw devices and can be invoked in parallel. This can lead to a
situation where each of the three parallel-running udev rules tries to
group the devices simultaneously. As a result, only the first rule
succeeds, while the others fail with an -EINVAL error because the CCW
devices have already been grouped.
To prevent this, schedule a new change uevent for the base device, which
will verify the sysfs before attempting the grouping. The change event is
triggered by all three devices, ensuring that the actual write to the
attribute occurs only once and only when the sysfs attribute is ready.
Hence the add events on different devices are serialized to change event
on the base device, which then prevent duplicate concurrent grouping
attempts.
Suggested-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The function copy_table_entry_write() maps/unmaps /proc/vmcore for each
64kB of the file in order to write its content to a dump partition.
This requires a page allocation of order 2 in kernel (crst_table_alloc)
each time a mmap() syscall is performed and which cannot always be
fulfilled due to external memory fragmentation. And this in turn
results in a OOM kernel panic while writing /proc/vmcore content to
a dump partition. To make zfcpdump more robust in the face of such
problems with page allocations of order > 0, we use a simple file
read/write loop to transfer the content of /proc/vmcore to a dump
partition. This solution is less efficient (by not much) than the old
one with mmap() because it requires additional user space copy but
we trade off here efficiency for robustness which is more important
for zfcpdump.
We use a statically allocated buffer to read data into from /proc/vmcore
and write to a dump partition to avoid repeated use of the memory
mapping kernel path which would be required for a buffer allocated
dynamically at each entry of copy_table_entry_write().
Another possible and very convenient solution would be to use sendfile()
which would avoid any user space copies but, unfortunately, sendfile()
doesn't work with large /proc files.
Example of failed mmap() call for /proc/vmcore
==============================================
[ 26.568654] init invoked oom-killer: gfp_mask=0x40cc0(GFP_KERNEL|__GFP_COMP), order=2, oom_score_adj=0
[ 26.568665] CPU: 0 PID: 1 Comm: init Not tainted 6.9.0-20240504.rc6.git0.9986ea583f39.300.fc39.s390x+zfcpdump #1
[ 26.568668] Hardware name: IBM 3931 A01 704 (LPAR)
[ 26.568669] Call Trace:
[ 26.568671] [<000003ffe03277c6>] dump_stack_lvl+0x76/0x98
[ 26.568676] [<000003ffe00f15c8>] dump_header+0x58/0x2d0
[ 26.568680] [<000003ffe00f219a>] out_of_memory+0x252/0x348
[ 26.568683] [<000003ffe0132f3e>] __alloc_pages_slowpath.constprop.0+0x65e/0x7c0
[ 26.568686] [<000003ffe01331a4>] __alloc_pages+0x104/0x128
[ 26.568688] [<000003ffe001ab46>] crst_table_alloc+0x2e/0xa0
[ 26.568693] [<000003ffe01164c4>] __pmd_alloc+0x24/0x160
[ 26.568696] [<000003ffe0116650>] pmd_alloc+0x50/0x68
[ 26.568698] [<000003ffe0117be4>] remap_pfn_range_notrack+0x194/0x310
[ 26.568701] [<000003ffe0117d7c>] remap_pfn_range+0x1c/0x28
[ 26.568703] [<000003ffe0015442>] remap_oldmem_pfn_range+0xb2/0x108
[ 26.568705] [<000003ffe01a0544>] mmap_vmcore+0x414/0x448
[ 26.568707] [<000003ffe01937c4>] proc_reg_mmap+0x84/0xa0
[ 26.568709] [<000003ffe011f264>] mmap_region+0x22c/0x6f8
[ 26.568711] [<000003ffe011fae8>] do_mmap+0x3b8/0x410
[ 26.568713] [<000003ffe01015cc>] vm_mmap_pgoff+0x9c/0xe8
[ 26.568715] [<000003ffe011d006>] ksys_mmap_pgoff+0x8e/0xb8
[ 26.568716] [<000003ffe011d0f4>] __s390x_sys_old_mmap+0x74/0x90
[ 26.568718] [<000003ffe0341a2a>] __do_syscall+0x1aa/0x220
[ 26.568720] [<000003ffe03478b0>] system_call+0x70/0x98
[ 26.568724] Mem-Info:
[ 26.568725] active_anon:1 inactive_anon:12 isolated_anon:0
active_file:83590 inactive_file:93939 isolated_file:0
unevictable:201 dirty:17845 writeback:4
slab_reclaimable:4259 slab_unreclaimable:1482
mapped:174 shmem:0 pagetables:810
sec_pagetables:0 bounce:0
kernel_misc_reclaimable:0
free:2694 free_pcp:105 free_cma:0
[ 26.568729] Node 0 active_anon:4kB inactive_anon:48kB active_file:334360kB inactive_file:375756kB unevictable:804kB isolated(anon):0kB isolated(file):0kB mapped:696kB dirty:71380kB writeback:16kB shmem:0kB writeback_tmp:0kB kernel_stack:544kB pagetables:3240kB sec_pagetables:0kB all_unreclaimable? no
[ 26.568732] DMA free:10776kB boost:0kB min:3496kB low:4368kB high:5240kB reserved_highatomic:0KB active_anon:4kB inactive_anon:48kB active_file:334360kB inactive_file:375756kB unevictable:804kB writepending:71360kB present:786428kB managed:764664kB mlocked:0kB bounce:0kB free_pcp:420kB local_pcp:420kB free_cma:0kB
[ 26.568735] lowmem_reserve[]: 0 0 0
[ 26.568738] DMA: 1069*4kB (UH) 757*8kB (UH) 11*16kB (H) 6*32kB (H) 1*64kB (H) 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 10764kB
[ 26.568747] 177773 total pagecache pages
[ 26.568748] 196607 pages RAM
[ 26.568748] 0 pages HighMem/MovableOnly
[ 26.568749] 5441 pages reserved
[ 26.568749] Tasks state (memory values in pages):
[ 26.568750] [ pid ] uid tgid total_vm rss rss_anon rss_file rss_shmem pgtables_bytes swapents oom_score_adj name
[ 26.568751] Out of memory and no killable processes...
[ 26.568752] Kernel panic - not syncing: System is deadlocked on memory
[ 26.568755] CPU: 0 PID: 1 Comm: init Not tainted 6.9.0-20240504.rc6.git0.9986ea583f39.300.fc39.s390x+zfcpdump #1
[ 26.568758] Hardware name: IBM 3931 A01 704 (LPAR)
[ 26.568759] Call Trace:
[ 26.568760] [<000003ffe03277c6>] dump_stack_lvl+0x76/0x98
[ 26.568763] [<000003ffe001f14e>] panic+0x10e/0x2e8
[ 26.568765] [<000003ffe00f21c8>] out_of_memory+0x280/0x348
[ 26.568768] [<000003ffe0132f3e>] __alloc_pages_slowpath.constprop.0+0x65e/0x7c0
[ 26.568771] [<000003ffe01331a4>] __alloc_pages+0x104/0x128
[ 26.568773] [<000003ffe001ab46>] crst_table_alloc+0x2e/0xa0
[ 26.568776] [<000003ffe01164c4>] __pmd_alloc+0x24/0x160
[ 26.568779] [<000003ffe0116650>] pmd_alloc+0x50/0x68
[ 26.568781] [<000003ffe0117be4>] remap_pfn_range_notrack+0x194/0x310
[ 26.568784] [<000003ffe0117d7c>] remap_pfn_range+0x1c/0x28
[ 26.568787] [<000003ffe0015442>] remap_oldmem_pfn_range+0xb2/0x108
[ 26.568789] [<000003ffe01a0544>] mmap_vmcore+0x414/0x448
[ 26.568791] [<000003ffe01937c4>] proc_reg_mmap+0x84/0xa0
[ 26.568793] [<000003ffe011f264>] mmap_region+0x22c/0x6f8
[ 26.568795] [<000003ffe011fae8>] do_mmap+0x3b8/0x410
[ 26.568797] [<000003ffe01015cc>] vm_mmap_pgoff+0x9c/0xe8
[ 26.568799] [<000003ffe011d006>] ksys_mmap_pgoff+0x8e/0xb8
[ 26.568801] [<000003ffe011d0f4>] __s390x_sys_old_mmap+0x74/0x90
[ 26.568803] [<000003ffe0341a2a>] __do_syscall+0x1aa/0x220
[ 26.568805] [<000003ffe03478b0>] system_call+0x70/0x98
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
For vr-kernel dumps use the offsets stored in os_info entries for
virt to phys address conversion when dump virtual address is to be
read, (e.g. vmcoreinfo symbols) using similar method as implemented
in crash-utility.
It is mainly required for reading "init_uts_ns" symbol and, in case
of crashed kdump, "lowcore_ptr" symbol along with a pointers to the
lowcore of every CPU.
Acked-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Support vmcore based dumps (ngdump, zfcpdump) with uncoupled physical and
virtual addresses. For that we just remove p_paddr != p_vaddr sanity check
for elf load headers.
Acked-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Output generated using libutil's util_fmt_*() functions contains
meta-data such as hostname and time of invocation. When writing test
cases that compare expected and actual tool output, this run-time
variable information needs to be filtered out, resulting in increased
complexity.
To address this, add a global option to suppress meta-data output via
environment variable FMT_NOMETA. If set to '1', no meta-data will be
generated.
Example:
$ FMT_NOMETA=1 chpstat --format json
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
The previous implementation did stop after the first download was
successful, even if it did not contain a CRL. This behavior renders a
second, third, ... link as backup location useless as the code ignores
them if the URI e.g. contains a error message. That results in not
having a CRL and probably a failed certificate verification.
Fix this by trying again if the download was successful but did not
contain a CRL
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
In order to allow loop devices usage for DASD dump emulation in fvt-tests,
do not bail out on ZG_TYPE_DASD device type returned by zg_type() for
s390_ext dump.
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
There are still a few scripts using the 'which' command to determine
either the full path or the mere existence of an executable.
Some of these scripts might run in minimal environments where 'which' is
not available due to dependency restriction. 'which' is also considered
unreliable for historical implementation details.
Use the POSIX defined [1] built-in 'command -v' instead to reduce
package dependencies and improve reliability.
[1] https://pubs.opengroup.org/onlinepubs/9699919799/
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
The new parameter 'SCP_DATA' can be used to pass additional kernel cmdline
parameters to a stand-alone SCSI/NVMe/ECKD dumper for debugging purposes.
Configuration example
=====================
ON_PANIC=dump_reipl
DUMP_TYPE=fcp
DEVICE=0.0.4711
WWPN=0x5005076303004711
LUN=0x4711000000000000
BOOTPROG=0
BR_LBA=0
SCP_DATA="dump_debug=6 ignore_loglevel earlyprintk=sclp panic_print=3"
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
When dump is copied to the filesystem in s390 format, follow on
'zgetdump -i' can fail with ioctl error:
# zgetdump /dev/dasdb1 -f s390 dump.s390
Format Info:
Source: s390_ext
Target: s390
Copying dump:
00000001 / 00008192 MB
00003688 / 00008192 MB
00006646 / 00008192 MB
00008192 / 00008192 MB
Success: Dump has been copied
# zgetdump -iVVVV dump.s390
zgetdump: Operation "BLKSSZGET" failed on "dump.s390" (Inappropriate ioctl for device)
Call ioctl(BLKSSZGET) only for s390_ext dump format (dump can be
stored on DASD partition only, not on the filesystem). For s390 format
a blocksize is not required for dump processing since s390 dump data is
not compressed.
Fixes: 271b809495 ("zdump/dfi_s390: Support reading compressed s390_ext dumps")
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
pvattest-C had a -a option for --arpk which the Rust implementation
missed.
Add this short option.
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
The commit fb0b6263d1 ("zipl/src: Fix problems when target parameters
are specified by user") breaks the case where the user has to provide
all target attributes via the zipl command line, because the target
device cannot be used to retrieve those attributes.
$ zipl -V --blsdir /tmp/tmp.xHmFUdgBCi/boot//loader/entries/ --config /tmp/tmp.dSv9MJ3svs
Looking for components in '/lib/s390-tools'
Using config file '/tmp/tmp.dSv9MJ3svs' (from command line)
Using BLS config file '/tmp/tmp.xHmFUdgBCi/boot//loader/entries//50_normal.conf'
Using BLS config file '/tmp/tmp.xHmFUdgBCi/boot//loader/entries//45_normal_swiotlb.conf'
Using BLS config file '/tmp/tmp.xHmFUdgBCi/boot//loader/entries//40_pv.conf'
Using BLS config file '/tmp/tmp.xHmFUdgBCi/boot//loader/entries//30_pv_reboot.conf'
Secure boot support: yes
Target device information
Device..........................: 2b:00
Device name.....................: nbd0 *)
Device driver name..............: nbd
Type............................: disk device
Disk layout.....................: SCSI disk layout *)
Geometry - start................: 2048 *)
File system block size..........: 4096
Physical block size.............: 512 *)
Device size in physical blocks..: 2095071
*) Data provided by user.
Building bootmap in '/tmp/tmp.xHmFUdgBCi/boot/'
Building menu 'zipl-automatic-menu'
Adding #1: IPL section 'Normal Guest' (default)
initial ramdisk...: /tmp/tmp.xHmFUdgBCi/boot//ramdisk-s390x
kernel image......: /tmp/tmp.xHmFUdgBCi/boot//vmlinux-s390x
zIPL environment block content:
Error: Could not add image file '/tmp/tmp.xHmFUdgBCi/boot//vmlinux-s390x': Could not get disk geometry
This reverts commit fb0b6263d1.
Acked-by: Eduard Shishkin <edward6@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Having timestamps in gzip leads to lintian warning
'package-contains-timestamped-gzip' and will harm reproducible builds.
Gzip option '-n' avoids saving original file name and especially timestamps
by default.
Fixes: https://github.com/ibm-s390-linux/s390-tools/pull/169
Signed-off-by: Frank Heimes <frank.heimes@canonical.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
[seiden@linux.ibm.com: Fix commit message]
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Do some formatting that are in experimental stage but improve the code
readability.
Use rustfmt with a nightly toolchain and enable:
format_code_in_doc_comments = true
reorder_impl_items = true
comment_width = 100
wrap_comments = true
normalize_comments = true
(see .rustfmt.toml)
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Remove all the code just pvattest-C used from libpv.
z(get)dump is the only user as of now.
Acked-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
This will reduce code dependency to otherwise unused code in libpv.
This code will be removed with the next patch.
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Add a CLI compatible Rust implementation of pvattest-C.
- All (non-experimental) options are supported and work exactly as in
the C implementation. For some options/parameters new variants are
available.
- `perform` now also accepts positional arguments, while keep accepting
-i and -o that was mandatory in the C implementation.
- `version` may also be a command instead of an option now.
- -V is deprecated
- -v increases verbosity instead of showing the version
- all experimental options are dropped
Acked-by: Qi Feng Huo <huoqif@cn.ibm.com>
Acked-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Renames pv crate to s390_pv and pv_core to s390_pv_core. pv was already
taken on crates.io.
Bump the versions of all crates to 0.10.0. From now on we follow Semver
compatibility rules when it comes to updates. patch-level updates will
not introduce any backwards incompatible changes. For now all crates in
this directory will have the same version number. A version update may,
therefore, not add any new things.
Library users in this repository still use the non prefixed names and
rename the crate in the Cargo.toml. Doc-tests have to use the new name
however.
Add some Cargo metadata to the Cargo.toml.
Acked-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Use `AsRef<Path>` instead of `&Path`, &str, .... to be more versatile
and accept more input types. In addition, use `PathBuf` and `Path` for
paths instead of `String` and `str`.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Denies compiling if one of the following lints find something in pv or
pv_core:
missing_docs,
missing_debug_implementations,
trivial_numeric_casts,
unstable_features,
unused_import_braces,
unused_qualifications
Those lint force developers to avoid unnecessary code and providing
debuggability & documentation for each public symbol.
Fix the compile time error introduced with those lints.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
crates.io does not like sub-crates in a crate. Unpack the
openssl-extensions sub-crate into a (private) module.
While at it, fix some styling issues.
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Add functionality for:
* sending attestation requests to the uvdevice and retrieve the
response
* create/read the attestation exchange format file format
Acked-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Add a function to decrypt a block with aes_gcm.
Add functionality to perform HMAC operations.
Acked-by: Qi Feng Huo <huoqif@cn.ibm.com>
Acked-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Add a thin wrapper around [u8] to be able to represent an u8-slice as a
hex-string for Display and Serialize.
Acked-by: Qi Feng Huo <huoqif@cn.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Remove !#[allow(unused)] in pv_core and fix all unused warnings from the
Rust compiler.
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Prepare pv & pv_core crates to be released on crates.io:
* Remove any unused API to stay flexible
* Remove utils dependency
* Move cli, tmpfile and version utilities to local utils crate
* Use the new utilities in the pv tools
* Rename Secret into Confidential to avoid confusion of Secret (now
Confidential) and AddSecret requests.
* Move the uvsecret module out of the request module and change the name
to secret.
* Cleanup dependencies
* Precise and correct minimal dependency versions
* Inline `Aes256Key::from_digest`
The cleanup ensures that the code also compiles with the dependencies
resolved to their minimal versions using:
$ cargo +nightly -Z minimal-versions update
$ cargo build
For more information refer to this blog post:
https://users.rust-lang.org/t/psa-please-specify-precise-dependency-versions-in-cargo-toml/71277/8
Signed-off-by: Marc Hartmayer <mhartmay@de.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Add subcommands in the man description. Add description for the help option.
Fix some minor wording issues.
Add the curve type in the --user-data option of create.
Acked-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Add a new tool named chpstat that can be used to view channel-path
statistics such as utilization and I/O throughput, and to query and
control the status of the channel-path statistics function.
Note: Channel-path statistics are only available on systems running in
an LPAR or DPM partition.
When run without further options, data for all channel-paths is
displayed repeatedly with a 5 second delay in table format.
Example output:
CHANNEL-PATH UTILIZATION(%) READ(B/s) WRITE(B/s)
ID TYP CMG SHR SPEED PART TOTAL BUS PART TOTAL PART TOTAL
1d 25 2 1 - 7.16 7.50 7.50 129M 129M 0.00 161K
21 1b 2 1 32G 0.00 0.00 0.00 0.00 0.00 0.00 0.00
34 1b 2 1 32G 0.00 0.00 0.00 0.00 0.00 0.00 0.00
61 25 2 1 - 0.00 0.01 0.00 0.00 2.00K 0.00 307K
63 25 2 1 - 0.00 0.01 0.00 0.00 0.00 0.00 381K
bd 11 2 1 10G - - - 529.8 532.1 616.3 616.3
Reviewed-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Add helper functions for converting structured key-value data into
different formats such as JSON, text pairs, and CSV.
Using these functions the resulting output format can be dynamically
configured at run-time without the need to duplicate output-generating
code for each format type. Also format-specific requirements such as
quoting, indentation, and comma-placement are automatically taken care
of.
Basic API calling sequence:
util_fmt_init() => Select output format
util_fmt_obj_start() => Start a new object or list
util_fmt_pair() => Emit a key-value pair
util_fmt_obj_end() => End the most recent object or list
util_fmt_exit() => Cleanup
Notes:
- Supported data elements are objects, lists and key-value pairs
(mappings)
- Scalars are only supported as part of a mapping
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Add function util_concatf() that appends the result of a format string
expansion to the end of an existing string while taking care of the
required memory allocations.
Usage example:
char *str = NULL;
util_concatf(&str, "list:");
for (int i = 1; i <= 3; i++)
util_concatf(&str, "%spart%d", (i > 1 ? "," : ""), i);
printf("%s\n", str); /* list:part1,part2,part3 */
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Add helper macros to easily create, enlarge and append new elements to
dynamic arrays of arbitrary types.
Note: The use of dynamic arrays over lists may be preferable in some
cases to reduce complexity, and they may be required in cases where
elements need to be addressed directly by index.
Usage example:
struct {
int a;
int b;
} *array = NULL, element = { 1, 2 };
unsigned int num = 0;
util_add_array(&array, &num, element);
printf("array[0].a=%d\n", array[0].a); /* array[0].a=1 */
printf("array[0].b=%d\n", array[0].b); /* array[0].b=2 */
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
The current implementation of util_hexdump_grp() enforces a minimum
indentation of 1 space which may not be suitable for all users.
Fix this by allowing a true zero indentation level.
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
The separator line emitted by util_rec functions may not be suitable for
all users. Fix this by making the hdr_sep parameter optional.
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
By default, files opened via fopen are block-buffered. As a result,
I/O errors that occur during file write operations via util_file_write_*
are silently ignored because fputs() only buffers data while actual I/O
occurs during the flush operation that is part of the final fclose()
library call.
Fix this by indicating errors that occur during fclose() via the
util_file_write_* function return code.
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Steps to reproduce: Prepare some target disk for IPL, specifying
its parameters via zipl "target options", and an image IMAGE_NAME
located on another disk. Don't specify "-a" option.
Actual result: Installation succeeded (resulting in unbootable setup)
Expected result: "Error: Could not add image file 'IMAGE_NAME': File
is not on target device"
The problem is in incorrect evaluation of device number(dev_t) where
the image is located by the function add_component_file_range() in
case when target parameters are specified by user.
Fixup: Retrieve info of the underlying disk without any user hints,
passing zeroed structure job_target_data
Signed-off-by: Eduard Shishkin <edward6@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
This patch fixes a bug in disk_get_info()
Steps to reproduce: Prepare a SCSI disk for IPL, specifying an image
("-i IMAGE_NAME") located on DASD and a target directory ("-t /mnt")
located on SCSI (dm). Don't specify "-a" option.
Actual result: Installation succeeded (resulting in unbootable setup!)
Expected result: "Error: Could not add image file 'IMAGE_NAME':
File is not on target device".
The problem is in incorrect evaluation of device number (dev_t) of
the device, where the image file is located, by the function
add_component_file_range(). To evaluate it, disk_get_info() is called
with the structure job_target_data (passed as the second argument)
previously completed by disk_get_info() called earlier to evaluate
parameters of the specified target device (SCSI dm) by the function
prepare_build_program_table_file(). Since the targetbase is already
set in the passed job_target_data (by the first call), in the second
call the source type is evaluated as "source_user", so the number of
the device where the image is located is calculated by the base SCSI
disk, which is incorrect.
Fixup: Rework disk_get_info(): introduce a dedicated function to
evaluate source type not depending on the job_target_data content.
Implement the core procedure as a switch by the evaluated source
type.
Signed-off-by: Eduard Shishkin <edward6@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Use "bootmap_dir" field of struct job_target_data instead,
thus avoid allocation/releasing additional resources.
Signed-off-by: Eduard Shishkin <edward6@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
This patch fixes a bug in disk_get_info()
Steps to reproduce: Prepare a DASD disk for IPL, specifying an
image ("-i IMAGE_NAME") located on SCSI (dm) and a target directory
("-t /mnt") located on DASD. Don't specify "-a" option.
Actual result: "Run /lib/s390-tools//zipl_helper.device-mapper /mnt
Error: Could not retrieve device-mapper information for device
'dasda1'"
Expected result: "Run /lib/s390-tools//zipl_helper.device-mapper 253:4
Error: Could not add image file 'IMAGE_NAME': File is not on target
device"
The problem is in incorrect calculation by disk_get_info()
parameters for @device associated with the image file. Specifically,
@target->bootmap_dir is passed to the script, which is wrong.
Fixup: Get rid of bogus branching in disk_get_info() in case when
target parameters are evaluated in "source_script" mode. Always pass
major and minor of the @device (whose parameters to be calculated)
to the helper script.
Signed-off-by: Eduard Shishkin <edward6@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Hyphens are converted by groff to a different unicode character leading
to failing command execution of copy-pasted options or examples.
Ensure that all hyphens are properly escaped.
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Hyphens are converted by groff to a different unicode character leading
to failing command execution of copy-pasted options or examples.
Ensure that all hyphens are properly escaped.
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Hyphens are converted by groff to a different unicode character leading
to failing command execution of copy-pasted options or examples.
Ensure that all hyphens are properly escaped.
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
The man page title was incorrectly set to "LSDASD". Set the correct name
"DASDSTAT".
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Hyphens are converted by groff to a different unicode character leading
to failing command execution of copy-pasted options or examples.
Ensure that all hyphens are properly escaped.
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Hyphens are converted by groff to a different unicode character leading
to failing command execution of copy-pasted options or examples.
Ensure that all hyphens are properly escaped.
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Hyphens are converted by groff to a different unicode character leading
to failing command execution of copy-pasted options or examples.
Ensure that all hyphens are properly escaped.
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Hyphens are converted by groff to a different unicode character leading
to failing command execution of copy-pasted options or examples.
Ensure that all hyphens are properly escaped. Fix whitespace damage
along the way.
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Hyphens are converted by groff to a different unicode character leading
to failing command execution of copy-pasted options or examples.
Ensure that all hyphens are properly escaped.
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Hyphens are converted by groff to a different unicode character leading
to failing command execution of copy-pasted options or examples.
Ensure that all hyphens are properly escaped.
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Under QEMU user can attach disk with smth like:
```
-device virtio-scsi-ccw,... -device scsi-hd,...
```
So virtio block device appears as '/dev/sda' instead of '/dev/vda'.
chreipl assumes all '/dev/sd*' disks as FCP disks, which is not a
case in such setup.
Closes: https://github.com/ibm-s390-linux/s390-tools/pull/154
Signed-off-by: Nikita Dubrovskii <nikita@linux.ibm.com>
Acked-by: Marc Hartmayer mhartmay@linux.ibm.com
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Add helper function to get device's real path under SYSFS_ROOT devices
hierarchy.
Github-ID: https://github.com/ibm-s390-linux/s390-tools/pull/154
Signed-off-by: Nikita Dubrovskii <nikita@linux.ibm.com>
[hoeppner@linux.ibm.com: Adapt commit message]
Acked-by: Marc Hartmayer mhartmay@linux.ibm.com
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
If many invocations of mdevctl occur simultaneously (as can happen with
libvirt) then waiting for 5-60 seconds per lock retry is simply too long.
Anticipating this possibility, retry more frequently but also attempt
significantly more retries than before.
Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Marc Hartmayer <marc@linux.ibm.com>
Tested-by: Marc Hartmayer <marc@linux.ibm.com>
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
The default values for repeated attempts at acquiring a file lock created
by util_lockfile are on the order of seconds. Let's leave this the
default, but allow for a caller to specify smaller values by adding
cw (custom_wait) functions and by switching from using sleep to usleep.
Reviewed-by: Anthony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Ensure that all hyphens in command options and examples are escaped properly.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Ensure that all hyphens in command options and examples are escaped properly.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
When formatting an ESE (thin-provisioned) ECKD DASD, dasdfmt(8)
defaults to the quick-format mode instead of full-format for normal
DASDs. This results in a significant performance impact during first
sequential write to each track, which may be unexpected for users.
To address this, change the default for dasdfmt to always use
full-format mode. Customers that require thin provisioning(*) still
override the default by specifying quick format explicitly using the
"-M" option.
Get rid of the related fallbacks; In case of unsuccessful space
release always fail. The customers that still require quick format can
proceed by specifying "--no-discard" option.
(*) Thin provisioning: while providing a large amount of logical
space, zero amount of actual space is provisioned and then
allocated on an on-demand basis.
Signed-off-by: Eduard Shishkin <edward6@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Check for vmcore LOAD segment with zero paddr (instead of zero vaddr) to
identify HSA since physical and virtual addresses can be uncoupled on s390.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Acked-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The 'lschp' command's output contains a 'type' identifier column. For
information about each value of this identifier, provide the
reference to the z/OS public documentation in the manpage.
Suggested-by: Mike Storzer <MSTORZER@de.ibm.com>
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Get rid of all arch barriers in main.rs. cmd.rs handles the arch
barriers for the individual commands. Simplifies main.rs & cmd.rs and
makes it easier to read and understand the code.
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Julian Ruess <julianr@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Fix findings from `cargo clippy --all-targets`. `warning: calls to
`push` immediately after creation` The findings were in test code only.
Also, replace a while loop with a function from Vec.
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Julian Ruess <julianr@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
They add no value and code outside the crate does not need those constants.
Reduces unnecessary constant duplication. Introduce an error for to
large Add-Secret requests and check for this to render those contsnts
fully unnecessary for the API.
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Julian Ruess <julianr@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The BinGuestSecret type provides no benefits. The public GuestSecret
struct can handle everything. Therefore, move the two functions from bin
to the non-bin variant. While at it, use a struct to define the binary
structure instead of copy numbers to some positions in a Vec. This
simplifies the addition of further secret types.
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Julian Ruess <julianr@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This streamlines and unifies the use and (de)serialization of structs
using a secret id. As a bonus, the hidden `for_pv` module is not longer
needed.
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Julian Ruess <julianr@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Provides a default for the cmd function for an UvCmd. This is enabled by
requiring an associated constant for the IOCTL nr of the command.
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Julian Ruess <julianr@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The content of `pv/src/uvsecret/uvc.rs` was moved with
9b51b8b882 ("rust/pv: Refactor pv crate") to pv_core.
The content was unused, but the file was not deleted.
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Julian Ruess <julianr@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Fix clippy waring `warning: very complex type used.` by introducing a
new struct containing the tuple, that was returned before.
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Julian Ruess <julianr@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
During the remove of mockito, lazy_static dependency was accidentally
removed as well.
Fix this by adding lazy-static as dev dependency again.
Fixes: aba8900074 ("rust/pv_core: Remove mockito dependency")
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This adds the counter numbers to the corresponding counter names to the
cpacfstats output. This aims to ease using this tool with other related
tools which may use other names for the counters.
Signed-off-by: Finn Callies <fcallies@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
All files created by chzdev feature a common header; however, this
header is absent in temporary files. It is necessary to incorporate
the consistent "Generated by chzdev" header into temporary files
generated by chzdev as well, so as to properly identify these files
via option --is-owner.
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Enhance the 'chzdev' tool by introducing a new option to discern
files created by 'zdev-tools.' The command usage is as follows:
$ chzdev --is-owner <file-name>
When executed, the command will return an exit code of 0 for all
files generated by zdev-tools. In the case of an unknown file, the
tool will return the exit code 'EXIT_UNKNOWN_FILE i.e 33.'
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add zdev-specific definitions into a lightweight header file. Rather
than creating a new one, transform the existing "site.h" into "zdev.h"
to house all generic zdev-specific definitions that needs to be shared
between chzdev, lszdev and zdev_id going forward.
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Up until now cpacfstats assumes that on the running hardware either all
PAI and CPUMF are available or non at all. Which counters are supported
may be hardware dependent and can vary in the future. With
this commit cpacfstats dynamically loads the counters from sysfs entries
in (/sys/devices/pai_crypto/events/) and (/sys/devices/cpum_cf/events/)
respectively.
Additionally cpacfstats has a new way of determining which PAI counters
are meant for kernel usage.
Signed-off-by: Finn Callies <fcallies@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
With f6c6f0cc71 ("rust/pv/test: Code + Certificate refactoring")
no code uses mockito anymore, but it's dependency was not removed.
Remove the mockito dependency from the rust workspace.
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
OpenSSL 1.1 seems to use a non-const parameter to X509_name_dup(), but
x509_armonk_locality_fixup() is passing a const there. The compile then
fails on "discards 'const' qualifier", when -Werror is used. Thus
resolve with a type-cast like in c2b_name().
Fixes: https://github.com/ibm-s390-linux/s390-tools/pull/167
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Dan Horák <dan@danny.cz>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
OpenSSL 1.1 seems to use a non-const parameter to X509_name_dup(), but
x509_armonk_locality_fixup() is passing a const there. The compile then
fails on "discards 'const' qualifier", when -Werror is used. Thus
resolve with a type-cast like in pv_c2b_name().
GitHub-ID: https://github.com/ibm-s390-linux/s390-tools/pull/167
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Dan Horák <dan@danny.cz>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Fix leak of temporary files: if prepare_build_program_table_file()
is called in no dry-run mode and there was an error then the file
@filename will not be deleted in free_bootloader()).
Fix leak of renamed files as well as corruption of previously
created bootmap files with the same name in case of unsuccessful
IPL installation.
Add a special flag to keep a track of file's "temporary" state;
Base the cleanup decision on this flag instead of checking dry-run;
Release resources captured by prepare_bootloader() in the error path;
Move the final rename to be called only after successful installation.
Original logic:
prepare_bootloader_ipl():
prepare_bootloader_ngdump():
always create temporary @filename
if (!dry-run) rename @filename;
install;
cleanup: if (dry_run) drop @filename (*** LEAK ***)
prepare_bootloader_device():
if (dry_run) create temporary @filename
install, don't rename;
cleanup: if (dry_run) drop @filename
New logic:
prepare_bootloader_ipl():
prepare_bootloader_ngdump():
always create temporary @filename and set @tmp_filename_created;
install;
if (!dry_run) rename @filename and clear @tmp_filename_created;
cleanup: if (@tmp_filename_created is set), drop @filename
prepare_bootloader_device():
if (dry_run) create @filename and set @tmp_filename_created;
install, don't rename;
cleanup: if (@tmp_filename_created is set) drop @filename.
Fixes: https://github.com/ibm-s390-tools/s390-tools/issues/165
Signed-off-by: Eduard Shishkin <edward6@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Acked-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Convert the assertion to a GError since an out-of-disk-space situation
is a valid situation that should be handled.
ERROR:utils/crypto.c:1843:__encrypt_decrypt_bio: assertion failed: (num_bytes_written == out_len)
Bail out! ERROR:utils/crypto.c:1843:__encrypt_decrypt_bio: assertion failed: (num_bytes_written == out_len)
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
The parser setup falsely set the argument type as filename array, but
code expected a single filename. Fixed by setting up the parser
correctly to expect a single file name.
Fixes: 3ab06d77fb ("pvattest: Create, perform, and verify attestation measurements")
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
New IBM signing keys will have Armonk as locality in the subject.
Ensure that CRLs with Poughkeepsie as issuer locality are still
discovered if they are signed with the signing keys private key.
Also, drop the check for issuer/subject comparison and only rely on
validity period and cryptographic signatures.
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
New IBM signing certificates will have 'Armonk' as locality in the
subject. Make sure that certificate revocations lists (CRL) with
'Poughkeepsie' as issuer locality are still considered as valid as long
as they are signed with the IBM signing keys private key. In addition,
drop the check for 'issuer(HKD) == subject(HKSK)' as it doesn't improve
security. While at it, remove now unused functions and fix a memory leak
of @akid in `check_crl_issuer`.
Reviewed-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
New IBM signing keys will have Armonk as locality in the subject.
Ensure that CRLs with Poughkeepsie as issuer locality are still
discovered if they are signed with the signing keys private key.
Also, drop the check for issuer/subject comparison and only rely on
validity period and cryptographic signatures.
Reviewed-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
* Get rid of Mockito
* create certs with AKID
* simplify things in the `create_certs.py` script
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
For LUKS2 volumes, zkey generates 'cryptsetup luksFormat' commands with
options '--pbkdf argon2i --pbkdf-memory 32 --pbkdf-force-iterations 4'
for low memory and time requirements. Using the default Argon2i options
might cause out-of-memory errors when multiple encrypted volumes are
unlocked automatically at boot through /etc/crypttab.
When the system runs in FIPS mode, which is indicated by file
/proc/sys/crypto/fips_enabled containing '1', the Argon2i password based
key derivation function might be disabled by a policy, and such
'cryptsetup luksFormat' commands might fail.
Generate '--pbkdf pbkdf2' instead if the system runs in FIPS mode.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Fix the support for staged installs. The Makefile variable `PKGDATADIR`
uses `DESTDIR` for all Makefile target, but actually it should only be
used for the `install*` and `uninstall*` targets. [1] Fix this by using
`DESTDIR` only for `install*` targets - uninstall* targets are not
supported by s390-tools.
Before this change, if `DESTDIR` was set for staged installs,
`genprotimg` has tried to find the bootloader binaries at the temporary
installation path `$DESTDIR$(TOOLS_DATADIR)/genprotimg/` instead of
`$(TOOLS_DATADIR)/genprotimg`.
[1] https://www.gnu.org/prep/standards/html_node/DESTDIR.html
Fixes: 65b9fc442c ("genprotimg: introduce new tool for the creation of PV images")
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Make ngdump_get_part_path() public in order for unit-tests to access it.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Clear CCW-type DASD standalone dumper (if installed on the DASD) upon
successful installation of the List-Directed ECKD dump tool on the same
device. This helps to avoid 'zgetdump -d' confusion and have only one
'active' dump tool per disk.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Acked-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Add DF_S390_DUMPER_MAGIC_SIZE constant to s390_dump.h.
Use it instead of hardcoded length when processing dumper magics
in zgetdump code.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Acked-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Move DUMPER_MAGIC constants from df_s390.h to the global header
include/dump/s390_dump.h in order to reuse it in zipl code.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Update dumpconf man page with list-directed ECKD dump information (new
attributes and configuration example for ECKD LDIPL dump).
Update etc/sysconfig/dumpconf with list-directed ECKD dump configuration
example.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
- Write the following sysfs attributes for list-directed ECKD devices
introducing setup_eckd_device() function.
br_chr: location of boot record
bootprog: boot program selector
- Remove redundant parameters from setup_ccw_device() and setup_fcp_device()
functioins.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Reject conversion of other key types with a proper error message.
Also fix a typo in another error message of the convert command.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Use similar `install` mode option in Makefile as in commit
9b2fb1d4d2 ("zdev: add helper to convert from dasd_mod.dasd to zdev
config").
Fixes: 73c46a3056 ("zdev/dracut: fix kdump by only activating required devices")
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
s390-tools doesn't define a common C/C++ standard at the moment.
Set the standard to gnu11/gnu++11, which is also used by the Kernel, and
establish a common baseline for all tools.
The -std flag is added to ALL_CFLAGS and ALL_CXXFLAGS to avoid losing it
in case CFLAGS are set by an outside entity.
It is also added to CLAGS_FOR_BUILD for this one special cross build
case.
The -std flag is removed from all tools that set it manually until now.
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Introduces the ability to `pvsecret` to add a signature (ecdsa or rsa)
to the program-reserved space (user-data) of an add-secret request
during the request creation. Additionally, some arbitrary data may be
inserted.
The new command `verify` checks if add-secret requests are sane (e.g.
start with the correct magic value). If the request contains a
user-signature `verify` will also verify this signature.
Acked-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Makes the source for the manfiles&README more readable. Fixes some nits
like double spaces, unnessecary indentations, line breaks, ...
Removes pvsecret-version.1 as this command maps to the --version
option.
Acked-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add a function to read a private key in PEM or DER format.
While at it, fix some documentation issues in read_{certs, crls}.
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
User-data can be added to add-secret requests. User-data can be unsigned
or containing a signature of the request using a custom private key.
The user-data is placed at offset 0x218 and 0x200 bytes long.
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add four new user-data types an add-secret request could have:
Unsigned, Signed(EcSECP521R1, Rsa(2048, 3072))
As the user-data enum was not marked as non-exaustive this might be a
breaking change for users. (Not for any crate in this repo though).
The addition of such user-data is provided by following patches.
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Improve the warning for the case where a host key document contains
multiple certificates (only possible for a PEM file). In case there are
multiple host key document only the first certificate is used.
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Fix a panic in `pvsecret` when a empty file is used as a host key
document.
$ touch hkd
$ pvsecret create --no-verify -k hkd --output req.bin --hdr sehdr
...
The host key document in 'bla' contains more than one certificate!
thread 'main' panicked at pvsecret/src/cmd/create.rs:192:31:
Fixes: dd82c26f87 ("rust: Add tool to manage UV-secrets")
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Use the `TemporaryDirectory` type to create a temporary directory. This
type has the advantage that the directory is automatically removed once
it goes out of scope. The old implementation in test_sysfs_write_i32
leaks a directory if a previous subtest failed. Also, using a temporary
directory for the LockFile test fixes the following error:
$ RUST_BACKTRACE=1 cargo test -- helper::tests::test_lockfile
...
running 1 test
test helper::tests::test_lockfile ... FAILED
failures:
---- helper::tests::test_lockfile stdout ----
thread 'helper::tests::test_lockfile' panicked at pvapconfig/src/helper.rs:265:9:
assertion failed: r1.is_ok()
stack backtrace:
0: rust_begin_unwind
at /rustc/79e9716c980570bfd1f666e3b16ac583f0168962/library/std/src/panicking.rs:597:5
1: core::panicking::panic_fmt
at /rustc/79e9716c980570bfd1f666e3b16ac583f0168962/library/core/src/panicking.rs:72:14
2: core::panicking::panic
at /rustc/79e9716c980570bfd1f666e3b16ac583f0168962/library/core/src/panicking.rs:127:5
3: pvapconfig::helper::tests::test_lockfile
at ./src/helper.rs:265:9
4: pvapconfig::helper::tests::test_lockfile::{{closure}}
at ./src/helper.rs:263:24
5: core::ops::function::FnOnce::call_once
at /rustc/79e9716c980570bfd1f666e3b16ac583f0168962/library/core/src/ops/function.rs:250:5
6: core::ops::function::FnOnce::call_once
at /rustc/79e9716c980570bfd1f666e3b16ac583f0168962/library/core/src/ops/function.rs:250:5
note: Some details are omitted, run with `RUST_BACKTRACE=full` for a verbose backtrace.
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-By: Harald Freudenberger <freude@de.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add the type `TemporaryDirectory` that creates a temporary directory
that is automatically removed when it goes out of scope.
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-By: Harald Freudenberger <freude@de.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Recent changes makes it reasonable to update the version string of pv
and pv_base to 1.0.0. Recent changes introduced some non-backwards
compatible changes, like move some Error definition from pv to the new
pv_core crate. Also, the pv crates seem to be in a good shape to be
considered released.
Therefore, move up the Semver to 1.0.0.
See also:
https://doc.rust-lang.org/cargo/reference/specifying-dependencies.html
NOTE: As these crates are not published to `crates.io` as of now, the
version number is meaningless, as cargo will not pull them from
anywhere and just use the files provided by this repository.
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Update the zerocopy dependency from v0.6.* to the non forward compatible
v0.7.*. Incompatible changes are the requirment of the FromZeroes trait
for FromBytes trait and the non-default derive feature which this
patches handles as well.
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Use a static Mockito server instead of creating multiple on-the-fly
during testing. Add the `mockito_server_available` test to quickly
verify that the mockito server could be constructed. Relocate the
verifier API test to the test folder as it tests the public API. Also,
make the Debug impl for CertVerifier public. The test relocation
requires this. Before, there could be a test local implementation of the
Debug impl as it was in the same crate.
While at it, get rid of the lazy_static crate in favor of the once_cell
crate. As the new std lib implementation is very near to the one from
once cell. The project will switch to the std impl when v1.70 is
available in all supported distros. See:
https://doc.rust-lang.org/std/sync/struct.OnceLock.html
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Replace all libc references to rust-std references if available.
This eliminates the need to include libc in the pv crate.
However, pv_base still refers to libc::ioctl and libc::ENOTTY.
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The rust std lib already provides functionality to compare two slies.
Replace all `memeq` invocations with == and remove the `memeq` function.
As a side effect this eliminates some unsafe code in this crate.
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Big refactoring patch of the pv crate. The main reason behind this
refactoring is to simplify testing and maintaining the pv crate while
keeping OpenSSL/libcurl dependencies optional. Using crate features
increases the number of targets that have to be tested. This refactoring
eliminates the use of features by splitting the functionality of pv into
a use OpenSSL and no-use-OpenSSL crate.
Split off some code from the pv crate into a pv_core crate. pv requires
pv_core and reexports all symbols. pv_base contains all code from former
pv that does not use OpenSSL or libcurl functionalities. The refactored
pv crate contains functionalities to generate requests and validate host
key documents. All features from pv are dropped as they are not needed
anymore and to streamline the codebase for easier use and testing. While
at it fix some documentation issues.
Users (pvsecret & pvapconfig) have next to no code change, besides the
different import of the crate.
Acked-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
A function does the job as well. This improves code readability and
useability. While at it remove the implicit Buffer wrapper. Users are
currently not use the benefits of a buffered write. Also, streamline the
write_out helper function.
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
With kernel commit 496bb034f4ff ("s390/smp: disallow CPU hotplug
of CPU 0") it is no longer possible to hotplug CPU 0.
As a side effect, the sysfs handle /sys/devices/system/cpu/cpu0/online
does no longer exist. Since cpuplugd relies on checking all online
handles of all CPUs, this change causes cpuplugd to fail as it
interprets a non existing online file as an indicator that no other CPUs
with higher IDs exist as well. This leads to cpuplugd assuming that
there are no CPUs available.
Instead of checking for the online file, it is preferable to check for
the existence of the parent folder to verify the existence of a CPU.
As a consequence, all other checks for non-existing online files must
now imply that the CPU is online, but not hotpluggable.
Signed-off-by: Tobias Huschle <huschle@linux.ibm.com>
Tested-by: Mete Durlu <meted@linux.ibm.com>
Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
When pai records data it may fail in select() system call.
This error is not reported and the pai program exits with success.
Change this and exit with proper exit code.
Fixes: d7b1cbad8b ("cpumf/pai: Add Processor Activity Instrumentation tool")
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Running command pai -r <file> might encounter entries of type
PERF_RECORD_SWITCH. Entries of that type are currently not handled
and cause an error message:
# pai -r ~/paicrypto.000
unknown header-type 14 unknown header-type 14 \
unknown header-type 14 ...
The error message is not terminated by a newline.
Handle entries of this type PERF_RECORD_SWITCH. These records
do not carry any payload at all, just a bit is set in the
header::misc member. This bit set determines context switch out.
Output after:
# ./pai -r ~/paicrypto.000
0x4b814018f4f3 6 cs-out
0x4b817bc3c936 6 cs-in
0x4b817bc5246c 6 cs-out
0x4b817bd90e9a 6 cs-in
....
#
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add pre-commit (https://pre-commit.com/) configuration to allow
developers to run certain checks on their commits automatically.
Currently enabled checks and hooks are:
- Generic checks (e.g. merge-conflicts, trailing whitespace, etc.)
- git clang-format
- Codespell
- Shellcheck (https://www.shellcheck.net/)
Note: For some hooks Rust is excluded as a lot of false positives are
produced at the moment.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
step "initrd config files" was added as 19th step to our data collection
updating for newer date and distro version in the sample output
Reviewed-by: Michael Storzer <mstorzer@de.ibm.com>
Signed-off-by: Joern Siglen <siglen@de.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
pvapconfig is a new tool for automatically configuring the APQNs
within an Secure Execution KVM guest with AP pass-through support.
Based on a given AP configuration it tries to find a matching
APQN and bind and associate it with the correct secret.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Adds getter for SecretList and SecretEntry.
Adds enum to represent secret types.
Add Iterator functionality for SecretList.
While at it, make the datatype of the capacity of the list transparent
for users.
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
For each initrd, collect verbose content listing as well as
the content of files matching the file glob patterns in $CONFIGFILES.
For dracut-squash such as RHEL kdump, this includes squashfs content.
Code is intentionally compatible with dash, so no bashisms.
Ubuntu initramfs has zdev persistent device configuration udev rules under
/lib/udev/rules.d/ (as opposed to /etc/udev/rules.d/).
Ubuntu initramfs stores configuration under /conf/.
Ubuntu kdump-tools have initrds under /var/lib/kdump/.
SLES auxiliary boot stage with grub2-s390x-emu has initrds under /boot/zipl/.
Dracut initramfs stores configuration under /etc/cmdline.d/ and /etc/conf.d/.
Dracut kdump have initrds under /boot/.
Github-ID: https://github.com/ibm-s390-linux/s390-tools/pull/158
Reviewed-by: Fedor Loshakov <loshakov@linux.ibm.com>
Acked-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Acked-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Converts zdev configuration into the syntax of the dracut cmdline option
rd.znet. Only znet options with non-default values are emitted. The result
string occurs on stdout. It represents one device-specification for the
given network interface name.
Example:
/lib/s390-tools/zdev-to-rd.znet persistent encbdf0
qeth,0.0.bdf0,0.0.bdf1,0.0.bdf2,layer2=1
User:
https://github.com/rhinstaller/anaconda/pull/5250
to generate dracut cmdline entries such as
rd.znet=qeth,0.0.bdf0,0.0.bdf1,0.0.bdf2,layer2=1
Github-ID: https://github.com/ibm-s390-linux/s390-tools/pull/158
Acked-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Acked-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Useful for debugging (what happened during early boot).
Also useful for distro installers, which can import the early config into
their own environment early after starting:
chzdev --import /run/zdev.initrd.config --persistent --yes \
--no-root-update --force --verbose
After that, distro installers can modify/add the device config based
on interactive or unattended installation choices using
chzdev --enable --active --persistent ...
Finally, distro installers can likewise transfer the entire device config
to the installed system mounted under $SYSROOT:
chzdev --export /tmp/zdev.config --all --type --persistent --verbose
Github-ID: https://github.com/ibm-s390-linux/s390-tools/pull/158
Acked-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Acked-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add parsing of dracut cmdline option "rd.zfcp=..." at initrd runtime.
It delegates configuration to chzdev.
Implement `dracut --print-cmdline` and `dracut --hostonly-cmdline` for
initrd build time. Emit an rd.zfcp option for each zfcp-attached SCSI disk
in dracut's device dependency graph (to mount the root-fs, or to access the
kdump target).
This allows a distribution independent device configuration.
Configuration is consistent by using chzdev as backend.
It also prevents duplicate activations of the same device.
Along with the existing functionality of zdev/dracut, it makes the
following dracut modules superfluous:
https://github.com/dracutdevs/dracut/tree/master/modules.d/95zfcp
[rd.zfcp.conf is no longer needed and thus ignored here; the preceding
("zdev/dracut: fix marking hostonly files so delete option works")
makes rd.hostonly=0 work as a generic replacement]
https://github.com/dracutdevs/dracut/tree/master/modules.d/95zfcp_rules
Github-ID: https://github.com/ibm-s390-linux/s390-tools/pull/158
Acked-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Acked-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The existing code can already determine the required devices for the
actively running system, but this does not work for execution environments
in different (disaster recovery) sites.
Kdump likely does not notice when running in a different site and does not
re-generate the kdump initrd (because the kdump config itself does not
change).
The new code allows users to explicitly specify devices required for early
boot in initrd on different sites. Assuming this is a small number of
devices and could even overlap between the root-fs and the kdump case, do
not further distinguish those two sets of devices, but simply use the same
marker attribute "zdev:early=1" for both cases. With all this site
information available at the (initial) kdump initrd generation, the
resulting kdump initrd can work on any site without having to re-generate.
Complements commit 3c7adcc3c81d ("zdev: dracut: modifiy the
module-setup.sh").
Github-ID: https://github.com/ibm-s390-linux/s390-tools/pull/158
Reviewed-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Acked-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Acked-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The existing code can already determine the required devices for the
actively running system. In case users would have a need to configure
additional devices for early boot in kdump initrd, import those devices
marked with "zdev:early=1" for completeness. Assuming this is a small
number of devices and could even overlap between the root-fs and the kdump
case, do not further distinguish those two sets of devices.
Github-ID: https://github.com/ibm-s390-linux/s390-tools/pull/158
Reviewed-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Acked-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Acked-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Additional debugging output can be generated with e.g. dracut option
"--stdlog 5" (or short -L5). It shows the chzdev export result, the output
of chzdev imports, and an overview of the resulting persistent config
within the initrd.
On systems, which default to using dracut option "--quiet", you might need
an additional "--verbose" to counter "--quiet" so -L5 has effect.
Typically combined with "--debug" to get a shell trace from building an
initrd (Note: --debug does not increase the log levels).
Github-ID: https://github.com/ibm-s390-linux/s390-tools/pull/158
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Acked-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Acked-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Otherwise, dracut skips modules that are "not hostonly", i.e. not used /
loaded on the system when running dracut to build an initrd.
Without the fix, zdev device auto configuration only works for device
types for which a device driver happened to be loaded when building an
initrd. Likewise for specifying rd.* boot options.
Hostonly mode is often the default in Linux distributions.
Make zdev device auto configuration work nonetheless without users
having to know about and tweak dracut modes for initrd generation.
On the typical sloppy hostonly mode, the code disables hostonly for
installing kernel modules. This covers building regular initrds, where zdev
device auto configuration should even work for device types, for which
device drivers were not loaded when an initrd was generated. This can
happen when new devices of new types are configured for a DPM logical
partition. Also, users could want to start using dracut cmdline options
rd.{dasd,zfcp,znet} for a device type that was not used when the initrd was
built.
The special strict hostonly mode is used by some kdump implementations. In
that case, hostonly remains in effect intentionally because only support
for the really required devices as determined by dracut module 95zdev-kdump
should be included in a kdump initrd due to the memory-constrained kdump
environment. Cf. commit 73c46a3056 ("zdev/dracut: fix kdump by only
activating required devices"), which also provides more references on
strict hostonly mode. Even for non-kdump cases, let strict hostonly mode be
effective here in 95zdev in case some future use case appears for this
special mode beyond kdump.
Github-ID: https://github.com/ibm-s390-linux/s390-tools/pull/158
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Acked-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Acked-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The sscanf() format specifiers for signed and unsigned int mistakenly
used "%d"/"%u" prefix analogous to "%l" for long but those do not exist.
Fixes: 37348ef662 ("libutil: add util_file_read_i()/util_file_read_ui()")
Acked-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
The crate dependencies were a bit to slack. Due to the rust dependency
resolver's strategy of always selecting the latest version this never
lead to any issues.
This has no impact on the workspaces Cargo.lock
Reviewed-by: Marc Hartmayer <marc@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
With the last patch introducing the rust workspace the location of
Cargo.lock has changed. Therefore, remove all crate level lock-files and
add rust/Cargo.lock as the only lock-file.
Steps to reproduce:
```
cd rust
mv pvsecret/Cargo.lock .
cargo build
cargo update -p openssl
cargo update -p curl-sys
cargo update -p rustix
```
While at it update some dependencies to get fixes for security issues.
Reviewed-by: Marc Hartmayer <marc@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
A workspaces simplifies the build and packaging process significantly.
All build artifacts and binaries are now built in a single location
(e.g., rust/target/release/*), and a unified dependency resolution is
used. Hence one Cargo.lock for all crates at rust/Cargo.lock.
Closes: https://github.com/ibm-s390-linux/s390-tools/issues/156
Reviewed-by: Marc Hartmayer <marc@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Since mdevctl commit acf78c1ff6c9 it is now possible for the
get-attributes event to occur between a pre-define and post-define.
This is done in order to obtain the active attributes for the device
before writing them to the config file, and implies that the
get-attributes cannot re-obtain the file lock. For other cases
where mdevctl calls get-attributes, the file lock is not already
held and must be obtained by ap-check before reading attributes from
active devices.
To solve this, let's use the knowledge that mdevctl is a single-threaded
tool and add a test to detect this scenario. If the file lock is
already held by the parent during a get-attributes, don't attempt to
re-acquire it.
Reported-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Add a check to the stage3b that the kernel cmdline is always
null-terminated. While at it, ensure the coding style is consistent.
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Make sure that the kernel command line used for the Secure Execution
boot image is always null-terminated. Before this change, users had to
ensure that the provided kernel cmdline was null-terminated, which was
error-prone. But since the default s390x Linux kernel command line is
set to `root=/dev/ram0 ro` the remaining reserved memory for the kernel
command line is zeroed out. Therefore, the problem only shows up if the
used kernel command line is shorter than the default kernel command
line.
Fixes: 65b9fc442c ("genprotimg: introduce new tool for the creation of PV images")
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Fix a valgrind finding. Fix an invalid read/write of one byte after the
actual struct to clear. Not fixing this may result in a illegal write or
memory corruption of the program. Fortunately, for the actual only user,
pvsecret this is not the case.
Fixes: c6f621d0 ("rust: Add library for pv tools")
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Pai collects data from per CPU ring buffers and stores them in the
memory mapped output file. When data is collected from many CPUs at
the same time, writing data to output file can be slow.
Improve this and allow the pai recording to run with higher
real time priority. This is the same approach as done by the perf tool.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
in customer situation we found lsqeth listing devices like:
Device name : (unnamed net_device)
Device name : enc2000
Device name : enc3000
- the braket around the "unnamed" device is braking the function call and
leads to stop the dbginfo.sh script.
- this patch removes brakets > the functions call works and call of osaoat
will report an unknown device instead of braking the dbginfo.sh script
Reviewed-by: Mario Held <mario.held@de.ibm.com>
Signed-off-by: Joern Siglen <siglen@de.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Make the description of the --keep_volser option more generic and avoid
mentioning specific tooling.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The zipl bootloaders are s390x specific, so only build them if the
`HOST_ARCH' is set to s390x.
While at it, rename `INC_FILES` to `EMBEDDED_BOOTLOADERS`. Also
introduce `EXTERNAL_BOOTLOADERS` variable and use it in the `install`
Makefile target.
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
When checking if a card or an APQN is online, not only check the 'online'
sysfs attribute, but also check the 'config' and 'chkstop' attribute.
Cards and APQNs in check-stopped or deconfigured state can still be reported
as online via the sysfs attribute, although they are not available to be
used for zkey.
In case the 2 additional sysfs attributes are not available in sysfs, then
don't fail, but rely on the 'online' attribute only.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Move the code responsible for installing stage3.bin to the
boot/Makefile. In addition, remove the stage3.bin from the Makefile
`all` target prerequisites in src/Makefile, as zipl can be built without
it. While at it, use $(INSTALL) instead of $(CP) for the bootloader
installation.
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Linux stable kernels can reach greater than 256 sublevels [1],
which can cause the cpi tooling to generate an invalid string
that gets passed to the firmware and causes unusual responses:
$ uname -r
5.4.255
$ cat /sys/firmware/cpi/system_level
0x04260000000504ff
--reboot--
$ uname -r
5.4.256
$ cat /sys/firmware/cpi/system_level
0x4260000000504100
The first sublevel field is defined as one byte, so ensure that
a value larger than that isn't included.
[1] https://lore.kernel.org/lkml/1612534196241236@kroah.com/
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Currently ZDEV_SITE_ID is derived with the help of an additional
udev-rule, 40-zdev-id.rules. The sole purpose of this rule is to
determine the ZDEV_SITE_ID environment value with the help of zdev_id
binary. This solution is minimal, but this has some unwanted side-
effects. The zdev_id logic get executed for all the events, even
those completely unrelated to zdev/or site, and imports the unneeded
envionment values to the udev-db.
Instead of having an additional rule file, add this logic as part of
the udev-rule of those devices which are configured with site-support.
The logic will then be available on all those rules with the
site-supported devices only.
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Introduce dev_site_configured macro,which can be used to find the
availability of site configurations for the device during udev rule
creation.
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Previously SITE_FALLBACK and other site-specific configuration support
macros were defined in device.h. Instead, move them to a relatively
smaller header file which is exclusive for site-related definitions.
This way, light-weight zdev_id also can use the same header file.
Reported-by: Steffen Maier<maier@linux.ibm.com>
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Behaviour of the qeth performance_stats sysfs attribute has changed
with kernel commit
b0abc4f5df76 ("s390/qeth: overhaul ethtool statistics")
that went into kernel v5.1.
Before the kernel commit
- collection of statistics was turned on and off by writing 1 or 0
- default after device activation was 0
- statistics were reset by writing 0
After the kernel commit:
- collection is always on
- attribute always reads 1
- statistics is reset by writing 1; writing 0 is a no-op
Problems of chzdev on new kernels:
chzdev cannot reset statistics ('performance_stats=1' does nothing).
'chzdev --export' always lists performance_stats.
'chzdev qeth --help-attribute performance_stats' reflects old behaviour.
This patch will do the following:
'chzdev qeth --help-attribute performance_stats' reflects new behaviour.
'chzdev --export' does not list performance_stats on new kernels.
'chzdev performance_stats=1' resets statistics on new kernels.
'chzdev performance_stats=0' still resets statistics on old kernels,
does nothing on new kernels.
Suggested-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
With many CPUs, such as triple digit counts, the by default many empty
sysfs directories are prohibitive to collect, especially if the number
of SCSI disk devices is also large, such as 4-digit counts.
Excluding them from being collected from sysfs saves hundreds times
thousands of archive entries and inodes on expansion.
Since the number device-mapper devices (multipath and other target types
such as LVM) is smaller and can include devices not backed by zfcp, keep
collecting
/sys/devices/virtual/block/dm-[0-9]*/mq/0/cpu[0-9]*/
Definitely keep collecting
/sys/kernel/debug/block/{sd,dm-}*/hctx0/cpu[0-9]*/
as it contains actual statistics files:
completed default_rq_list dispatched merged poll_rq_list read_rq_list
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Replace static_assert() with STATIC_ASSERT macro from zt_common.h in order
to get rid of glibc dependencies in zipl/boot and comply with older
C standards.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Suggested-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Set the maximum line length for branch description messages (`git branch
--edit-description`) to 72 characters.
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Update zgetdump man page with the information of compressed DASD dumps
support as well as new verbose 'zgetdump -i' output entries.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Move DF_S390_DUMPER_SIZE_* constants from zdump/df_s390.h to
boot/loaders_layout.h since ccw dumper size depends on the zipl boot
loader layout (to keep it all in one place).
Rename DF_S390_DUMPER_SIZE_* constants to STAGE2_DUMPER_SIZE_*
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Update verbose 'zgetdump -i' output with zlib info (internal zlib version
and zlib compression unit size).
The following new entriees are to be dispalyed:
Zlib version.......: 1
Zlib compression unit: 1 MB
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Increase the auxiliary buffer size from 8 pages to 1 megabyte in order to
significantly increase compressed dump processing speed.
For uncompressed dumps, the effect is minor.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Update dfi_s390.c to support reading of compressed dump segments.
For this, introduce a callback function for reading memory chunks
associated with compressed dump segments. Apart from the segment location
on disk this function requires the entry_offset array from the dump segment
header in order to process each compressed entry separately, thus allowing
fast seek processing for zgetdump (no need to decompress a big dump segment
to extract a single piece of data).
In addition, split mem_chunks_add_ext() in several functions.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Since we are using the existing s390 extended dump format for compressed
dumps as well, set the version of the s390_ext dumper with compression
support and also dump header of the compressed dump to '2' (in order for
zgetdump to distinguish).
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Acked-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
- Adjust progress_print() calls to pass updated address after the set of
blocks has been written to disk.
- Currently total_dump_size value is updated only after the entire dump
segment is written to disk what leads to ambiguos Dump file size values
displayed by progress_print(). Change write_addr_range() to re-calculate
total_dump_size after each set of blocks has been written to disk thus
printing the correct value at the end of each log entry.
- Avoid final log entry duplication.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Acked-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
With current implementation, printing progress while writing a compressed
data chunk might be very inaccurate. Thus, for compressed dump segments
skip progress_print() in write_addr_range() and call it after each
compressed memory chunk is written to disk. For that change
write_addr_range() to call progress_print() conditionally based on the new
print_progress parameter.
For non-compressed dump segments, call progress_print() from
write_addr_range() just as before.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Acked-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add --no-compress option to explicitly omit compression for single-volume
DASD dumper. Used primarily for test purposes.
Since only the lowest byte of mvdump_force field (struct
stage2dump_parm_tail) has been used, split it in two byte fields and use
one for the new no_compress attribute.
Update zipl help and zipl man page with the new parameter info.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Move struct stage2dump_parm_tail from stage2dump.h in to
include/dump/s390_dump.h
Pass the entire stage2dump_parm_tail structure to install_dump_* functions
instead of individual parameters.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Use a separate linker script eckd2dump_sv.lds for single volume dumper with
compression support.
The new dump tool with zlib compression support now has a size of 8 pages.
Since DASD stand alone dump requires a block size of 4K, we are not
affected by the stage 2 size limitations and can load the dumper to
stage 2 as before. We just need to move the HEAP section for ECKD dumper
in the layout definitions up to 0xb000 address. Also expand the stack by
unused 0x400 bytes.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Integrate zlib DFLTCC deflate compression to single volume dasd dumper
using the existing s390 extended dump format. Compression takes place
only if DFLTCC facility is available, otherwise dump is written
uncompressed as before.
First megabyte of memory is always written uncompressed and afterwards
this area is used for zlib workspace and for the compression output buffer.
The compression takes place in chunks of data of equal size (currently 1MB)
and the offset of each compressed chunk is stored in the dump segment
header. Since existing dump segment headers of 1 page size are used, we
need to limit the maximum size of compressed dump segments.
Chunk is written uncompressed in case of compression error or if
deflate compression only makes it bigger.
Thus every chunk of data is compressed separately and can be decompressed
independently. The main reason for that is to enable zgetdump to make fast
read seeks. Otherwise, zgetdump would need to decompress a big dump segment
in the worst case to extract a single piece of data.
Put compression related functions and structures to eckd2dump_zlib.c
and eckd2dump_zlib.h
Update zipl man page with the general information of zlib compression
support.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Move code from write_dump_segment() to write_addr_range() function to use
it later for writing compressed dump segments as well.
Verify that passed address range is a multiple of dasd block size.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Instead of using its own DF_S390_ constants and df_s390_ structs
in df_s390.h, include those from "dump/s390_dump.h" in order to minimize
duplicates. Adjust the code, where required, to use <stdint> types
instead of those defined in zt_common.h (e.g. use uint64_t instead of u64).
Adjust zdump include statements.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Move common dump related structures and constants to the global header
"dump/s390_dump.h" in order to get rid of many duplicates in zgetdump code.
Adjust zipl include statements and update Copyright statements.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Mainly zlib code remains unchanged for the sake of further maintenance.
Only minor adjustments of zlib deflate parts for build purposes:
- Make is_dfltcc_enabled() always return true
- Define CONFIG_ZLIB_DFLTCC in zlib.h to build zlib code with DFLTCC support
- Remove inflate related prototypes from zlib.h
- Adjust oesc_msg() to use snprintf from libc.h
- Remove BUG_ON from zlib_deflate_workspacesize()
- Replace bitrev32() with bi_reverse() from defutil.h
- Include <assert.h> to dfltcc.h header because of static_assert() calls
- Fix other include statements
- Adjust the text in zipl.h following Zlib License requirements
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add required zlib_deflate parts based on kernel zlib code in preparation
to DASD dumper DFLTCC deflate exploitation. Omit inflate modules in
order to minimize the dumper size (no decompression is required for the
dumping).
Adjust include statements leaving other code as is.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The AP queue states within a SE guest may have a so called asynchronous
error pending. When that's the case, the sysfs read of some AP queue
attributes fails with EIO. lszcrypt was not really prepared for this
and instead showed some incorrect output.
This patch fixes this oddity and now lszcrypt -c shows "error" in case
of ap_bound or ap_associate read errors and lszcrypt -V shows also
"error" if the BS bits could not get fetched.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
`pkg-config` is mandatory for compiling s390-tools anyway therefore
let's replace `curl-config` and `xml2-config` calls whenever possible.
In addition, `pkg-config` has the advantage that cross-compilation is
supported. While at it, use `pkg-config` for libcrypto, json-c, and
libssl as well.
Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The pkey kernel module supports two key blob formats for EP11 AES keys.
The first one (PKEY_TYPE_EP11) contains a 16 bytes header that overlays
the first 32 bytes of the key blob which usually contain the ID of the
EP11 session to which the key is bound. For zkey/dm-crypt that session
ID used to be all zeros. The second blob format (PKEY_TYPE_EP11_AES)
prepends the 16 bytes header to the blob, an thus does not overlay the
blob. This format can be used for key blobs that are session-bound, i.e.
have a non-zero session ID in the first 32 bytes.
Change zkey to generate EP11 keys using the new format (i.e. pkey type
PKEY_TYPE_EP11_AES), but existing key blobs using the old format can
still be used.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Joerg Schmidbauer <jschmidb@de.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Add lspai program and man page to display Processor Activity
Information (PAI) facility counter sets in the same way as
lscpumf for the CPU Measurement Facility counter sets.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
When calculating smt utiliziation field, subresults are capped to a
minimum value of zero to prevent wrap around while converting values
from signed to unsigned integers. The capping of subresults cause slight
inaccuracies therefore capping has been moved from intermediate steps
and done at the end.
Fixes: 0209c11bc1 ("hyptop: Add real SMT utilization field")
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
This complements v2.27.0 commit 73c46a3056 ("zdev/dracut: fix kdump by
only activating required devices"). On older distributions, the absence of
zdev_id can cause the following harmless error messages for each udev
event:
(spawn)[387]: failed to execute '/lib/s390-tools/zdev_id' \
'/lib/s390-tools/zdev_id': No such file or directory
Kdump is still functional nonetheless.
As of v2.24.0 commit 2e89722ef0 ("zdev: make site specific udev-rule for
ccw"), the invocations of chzdev within
zdev/dracut/95zdev-kdump/module-setup.sh generate
/etc/udev/rules.d/40-zdev-id.rules. And so even though zdev-kdump
intentionally does not install zdev_id and its previous singular user
zdev/udev/81-dpm.rules into the kdump initrd, because DPM device auto
configuration is not desired in the kdump environment, zdev_id meanwhile
has an additional functionality for site-support and the generated
40-zdev-id.rules calls /lib/s390-tools/zdev_id. By installing zdev_id into
the kdump initrd, 40-zdev-id.rules can work without error.
Fixes: 73c46a3056 ("zdev/dracut: fix kdump by only activating required devices")
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Other tools may need to process the configuration-unique id. Provide a
machine readable format by writing to a YAML file containing a `cuid`
entry and optionally an `add` entry. New CLI options `--format` and
`--output` are introduced for this. Currently, only the output format
`yaml` is supported.
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Refactor the code responsible for printing the verification result into
a new function named `fprint_verify_result`. This function will be
reused in the future and a new output format will be added. While at it,
increase the dump data width for the addition data. In addition, add a
prefix `0x` to the values in order to indicate that these are
hexadecimal values.
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add `beautify` parameter to `pvattest_hexdump`. If the parameter is set
to true, a offset and whitespaces will be added for better readability.
With beautify set to FALSE:
14141414141414141414141414141414
With beautify set to TRUE:
0x0000 1414 1414 1414 1414 1414 1414 1414 1414
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The only user of `pvattest_hexdump` uses GBytes anyway, therefore let's
use GBytes as parameter type for `pvattest_hexdump`.
While at it, change the order of the parameters, constify `@width` and
handle the `@width == 0` case, which results in an hex-string without
any line breaks.
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This fixes the following error (using GNU Make 4.3.0):
make[2]: command: Command not found
The reason for this is that `command` is a bash builtin. `command` is
used in `common.mak` for the `combdb` Makefile target.
While at it, remove the now useless `SHELL := /bin/bash` definitions in
the sub-Makefiles.
Fixes: 3d098416c6 ("common.mak: add `compdb` Makefile target")
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Replace local ifs_orig variables in different functions by a single
global IFS_ORI variable. This will reduce the risk of missing a local
saving and restore of the original IFS.
Reviewed-by: Michael Storzer <MSTORZER@de.ibm.com>
Signed-off-by: Joern Siglen <siglen@de.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add a README.md to the rust subdirectory as a guideline for writing
s390-tools tools in Rust. This includes build integration, dependency
handling, and a few coding style hints. Rust related information
is also added to the main README.md.
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
[hoeppner@linux.ibm.com: Adapt details in README.md]
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add `pvsecret` a tool to create, add, list, and delete Ultravisor
secrets. `pvsecret` uses the functionality from the pv-crate
to provide an command line tool to manage the secrets.
Add a new target group PV_TARGETS in rust/Makefile that additionally
requires openssl and libcurl as pv with the feature "request" uses
openssl and libcurl fearures.
Acked-by: Jan Höppner <hoeppner@linux.ibm.com>
Acked-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
[hoeppner@linux.ibm.com: Adapt man pages and help output]
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add a `pv` crate that bundles useful functions and structs for creating
requests like `Attestation`, `Add Secret`, or even `Boot` a.k.a.
Secure Execution Image.
Note pv includes a subcrate `openssl_extensions` that (temporarily)
bundles some needed `openssl-rust` functionalities that are not
upstream yet. The plan is to remove these, when they become
upstream.
The pv crate has multiple features:
* request - code to generate requests
* uvsecret - code to access the UV-secret api
with request enabled also generating requests is
possible
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Acked-by: Jan Höppner <hoeppner@linux.ibm.com>
Acked-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The rust integration into the s390-tools build system consists of the
following steps:
- Add a subdirectory for the rust code.
- Add a Makefile that forwards rust builds to `cargo`.
- Add a `utils` crate for rust code in s390-tools.
- Add rust stuff for dotfiles:
- gitignore
- editorconfig
- codespellrc (while at it, add an ignore file)
With cargo the rust ecosystem has its own build system which also is
responsible to resolve rust dependencies via downloading the dependencies
from (default) crates.io and discover the source files. Therefore, the
Makefile just calls `cargo build` to forward the build to cargo.
If a rust crate does not require external dependencies, users might call
rustc directly.
A simple `make` will build all the rust targets as well (with --release
specified). Also `make install` will work as usual.
A few Makefile configuration variables are introduced for rust/Cargo:
- HAVE_CARGO (default 1) to toggle the build of rust code using cargo
- CARGOFLAGS to add custom cargo flags, e.g. --offline
- CARGO Cargo binary location defaults to
$(where cargo)
A new global make target is defined to get the current s390-tools
version:
$ make version
2.28.0
rust/Makefile also has the `print-rust-targets` target to print all rust
directories/crates that should be shipped/installed.
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Acked-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Command vmur issues a warning and aborts receiving a file from
the reader when either option -t or option -b is specified.
Example:
./vmur re -t 0x25,0x40 22 -H /tmp/xxx.txt
vmur: Conflicting options: -b and -t are mutually exclusive.
This is wrong as there is only one option specified.
The command should be aborted only when both flags are specified.
Fix this wrong behavior.
Fixes: d5f853c460 ("vmur: Remove option -c for dump file conversion")
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reported-by: Benjamin Block <bblock@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
IBM Secure Execution guests may want to share additional secrets with
the Ultravisor in a secure manner. For this the concept of secret
requests and three new Ultravisor-calls were introduced.
Add support to genprotimg to prepare an Secure Execution image with the
requirement that add-secret requests must provide an extension secret
that matches the customer communication key (CCK) derived extension
secret.
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
In preparation for the next patch, add the parameter `NAME` to the
`MUT_EXCL_BOOL_FLAG` macro. This is useful for the case when the command
line flag has a different naming than the struct field.
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Refactor arguments related to the SE header control flags into own
struct with the name `PvControlFlagsArgs`. This change makes it easier
to extend the control flags arguments further, without touching the
signature of `pv_img_set_control_flags`. While at it, rename the struct
members `allow_...` to `enable_...`. This matches with the command line
option names.
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Introduce a function for setting the control flags. This makes it easier
to add more control flags in the future.
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Simplify the clean target since there are several redundant
things (*.bin) and files that aren't built at all (.xxx and .yyy).
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Only the bootloaders cannot be built as PIE and for that there are
already the -no-pie linker and compiler flags set by the boot/Makefile.
In addition, remove the `noexecstack` linker flag as it has no use
anymore (see commit 518bf7d7357 ("zipl/boot: use
`--no-warn-rwx-segments` linker flag")). It was originally introduced to
declare the ELF segment of the bootloader stack as non-executable. But
this ELF attribute had no effect for multiple reasons:
1. ALL_LDFLAGS is not used for the bootloaders
2. no ELF loader is used for the bootloaders that would take this ELF
attribute into account
This fixes the problem of overriding `-fPIE` set by the distributor.
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Set the maximum line length for commit messages to 72 characters, and
the indentation style for Makefiles to TAB.
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Currently, the debug information of the bootloader is discarded during
the raw binary creation. Change this by creating separate
<loader>.bin.debug files containing the debug information. The packager
will then be able to package these files as desired and the developer
can use them to debug the code.
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
When creating a tar archive, dump2tar incorrectly truncates the last
character of file paths that are exactly 100 characters long.
Paths up to 100 characters can be represented in the 100-byte name field
of a tar header entry, while longer paths are handled via an additional
tar data block. For 100-character paths, dump2tar determines that a
single header is sufficient, but then uses util_strlcpy() to store the
path into the name field. Since util_strlcpy() ensures nul-terminated
strings, the final character of the path is overwritten.
Fix this by using strncpy() instead of util_strlcpy(). Also mark the
affected name fields as "nonstring" to prevent associated compiler
warnings.
Reported-by: Steffen Maier <maier@linux.ibm.com>
Fixes: d85cf20981 ("dump2tar: Change SET_STR_FIELD to copy strings correctly")
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Commit 62ec87680a61 ("common.mak: improve cross compilation support")
added one extra whitespace during the changes of the toolchain command
definitions. The rest of the commands did not receive that change.
Since then the pretty print output looks like this:
...
CC zipl/boot/eckd1b.o
CXX ziomon/ziorep_collapser.o
SED zdev/src/lszdev_usage.c
CC hyptop/sd_cpu_items.o
MV zfcpdump/zfcpdump-initrd
LINK dasdfmt/dasdfmt
...
Add the additional whitespace to all other tools definitions used during
the build process.
Note: This doesn't fix the misaligned indentation for commands like
$(CC_FOR_BUILD) as those inherit the whitespace from the original
command, here $(CC).
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Fix the following warnings:
troff: zkey-ekmfweb.1:455: warning: macro 'APP=LINUX'' not defined
troff: zkey-ekmfweb.1:457: warning: macro 'encvol'.' not defined
A single quote (') at the beginning of ta line is interpreted as macro.
Fix this by starting the line with a dummy character (\&).
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
include the version of dbginfo.sh just used for data collection into our
tar file - so we have the used version in case of data collection problems.
Reviewed-by: Michael Storzer <MSTORZER@de.ibm.com>
Signed-off-by: Joern Siglen <siglen@de.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The `install` Makefile target of the top Makefile has `all` and
`install-recursive` as prerequisites. This leads to the two recursive
Makefile calls `make -C <SUBDIR> all` and `make -C <SUBDIR> install`.
The problem is these two targets try to build the same object files and
this leads to a race condition between these two targets in case of a
parallel build.
Fix this problem by removing the `all` prerequisite from the `install`
target, as it is not needed since all the `install` targets in the
sub-Makefiles already have proper prerequisites.
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
- Instead of always clearing the memory on reipl after the ccw dump has
been taken, check for the special OS_INFO_FLAG_REIPL_CLEAR flag in
os_info flags entry (indicates if sysfs 'clear' attribute has been set
on the panicked system) and trigger diag308 with a proper subcode.
- Get rid of superfluous ipib_info structure in stage2dump.c.
- Collect ipl_pbt constants in boot/ipl.h header.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Acked-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add DIAG308_LOAD_NORMAL diag308 subcode (used by FCP/NVMe normal ipl).
Rename other diag308_subcode and diag308_rc constants to be in sync with
kernel naming.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Introduce new os_info flags entry pointing to the field with bit flags.
The flag OS_INFO_FLAG_REIPL_CLEAR indicates that 'clear' sysfs attribute
has been set on a panicked system.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
- Add os_info_check() function to verify os_info address, magic and
checksum.
- Add os_info_entry_is_valid() function to check whether requested entry
is present and valid.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Acked-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
- Move zipl/boot/error.h to include/boot
- Adjust include statements in zipb/boot and genprotimg/boot
- Remove error.h from tunedasd/src/tunedasd.c as not needed
- Fix tunedasd/src/Makefile
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Make 'struct os_info *os_info' a const to ensure/indicate that no changes
are made to the given structure.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
- Move struct os_info from kdump.h to the new header os_info.h.
- Place os_info.h to include/boot in order to use it in zgetdump
code as well.
- Replace hardcoded value of OS_INFO_CSUM_SIZE with a properly
calculated one.
- Rename os_info_check() of kdump.h to kdump_os_info_check().
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
While calculating real CPU SMT utilization, the SMT speedup factor needs
to be taken into account. Speedup factor depends on machine generations
and variations on workload the machine has. The users should be able to
determine the value according to their needs.
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
By using core utilization, thread utilization, and management
utilization, it is possible to determine how much capacity is left or
how much the real CPU SMT utilization is on lpars. Extending hyptop
with this new field provides useful information.
For more info about real CPU SMT utilization:
https://linux.mainframe.blog/smt_utilization/
Briefly:
ur = real SMT util
uc = core util
ut = thread util
um = *management util
s = **speedup factor
ur = ((uc * per_core_thr_count) - ut) / s + (ut - uc) + um
* management utilization:
logical core time spent on hypervisor instead of logical partition.
** speedup factor:
metric used to calculate the SMT utilization on that logical core. This
value varies depending on the workload and the machine generation due
to hardware optimization level.
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The compiler doesn't fully understand the code block that precedes the
usage of `site` in the condition and thus it thinks it could be
uninitialized. Silence the warning with an explicit initialization.
In function 'get_site_from_pers',
inlined from 'dev_table_get_value' at lszdev.c:1079:10:
lszdev.c:258:20: warning: 'site' may be used uninitialized [-Wmaybe-uninitialized]
258 | if (site == SITE_FALLBACK)
| ^
lszdev.c: In function 'dev_table_get_value':
lszdev.c:234:13: note: 'site' was declared here
234 | int site, i, num = 0;
| ^~~~
Closes: https://github.com/ibm-s390-linux/s390-tools/pull/152
Signed-off-by: Dan Horák <dan@danny.cz>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The compiler doesn't fully understand the code block that precedes the
usage of title_off in the condition and thus it thinks it could be
uninitialized. Silence the warning with an explicit initialization.
CC zipl/src/scan.o
In function ‘sort_bls_fields’,
inlined from ‘scan_bls’ at scan.c:1502:8:
scan.c:874:12: warning: ‘title_off’ may be used uninitialized [-Wmaybe-uninitialized]
874 | if (title_off == 0)
| ^
scan.c: In function ‘scan_bls’:
scan.c:842:16: note: ‘title_off’ was declared here
842 | size_t title_off;
| ^~~~~~~~~
GitHub-ID: https://github.com/ibm-s390-linux/s390-tools/pull/152
Signed-off-by: Dan Horák <dan@danny.cz>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The last commit accidentally deleted the TOOLS_DIR for non-s390x
architectures.
Fixes: de013d2f ("Makefile: add genprotimg to non-s390x architectures target list")
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
`genprotimg` can be useful on non-s390x architectures such as x86 or
arm. Therefore add `genprotimg` to the non-s390x target list.
How to build genprotimg on a non-s390x system (s390x cross-compiler
required)
$ # Build and install /usr/bin/genprotimg
$ make -C genprotimg
$ make install -C genprotimg
$ # Build and install the genprotimg bootloaders
$ make -C genprotimg/boot HOST_ARCH=s390x CROSS_COMPILE=s390x-linux-gnu-
$ make install -C genprotimg/boot HOST_ARCH=s390x CROSS_COMPILE=s390x-linux-gnu-
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
The genprotimg bootloaders are s390x specific, so only build them if the
`HOST_ARCH' is set to s390x.
On x86 one can cross-compile and install the bootloaders as follows:
$ make -C genprotimg/boot HOST_ARCH=s390x CROSS_COMPILE=s390x-linux-gnu-
$ make -C genprotimg/boot install HOST_ARCH=s390x CROSS_COMPILE=s390x-linux-gnu-
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
It's cleaner if the bootloader installation code is located in the
boot/Makefile, rather than the top Makefile.
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Under typical circumstances these sysfs attributes should be available
however if the device happens to be in the process of being removed
without the protection of the ap config file lock, this scenario can
be encountered. In this case, ignore the device and assume it is in
the process of being removed.
Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Since this callout reads sysfs values for the specified mdev, the
ap config file lock should be held to prevent other tools from
making changes to the ap configuration at the same time.
Reviewed-by: Jason J. Herne <jjherne@linux.ibm.com>
Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
`load_wait_psw` is defined in include/boot/s390.h but is implemented in
zipl/boot/libc.c. This results in a dangling definition for s390.h users
other than zipl, due to the missing implementation. Since the function
is only relevant for zipl, move the definition to the corresponding
header file zipl/boot/libc.h
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
include/boot/s390.h relies on s390 specific kernel headers. However,
some tools used this header for non-s390 code (outside of boot-loaders).
To solve this the PSW and PAGE_SIZE definitions are now in separate
header files. All includes for s390.h which are not in boot-loader code
are replaced with one of psw.h or page.h.
This fixes the compilation failure on ppc64le due to conflicting types
for `__vector128`.
Fixes: https://github.com/ibm-s390-linux/s390-tools/issues/151
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Use a minimal assembly snippet to check for linker flags. This has the
advantage that it will work even if only the cross-toolchain is
installed, but not, for example, stdlib.
Using the C snippet, the check runs in a similar error like this:
/usr/bin/s390x-linux-gnu-ld: cannot find crt1.o: No such file or directory
/usr/bin/s390x-linux-gnu-ld: cannot find crti.o: No such file or directory
/usr/bin/s390x-linux-gnu-ld: cannot find -lc: No such file or directory
/usr/bin/s390x-linux-gnu-ld: cannot find crtn.o: No such file or directory
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Using option --by-interface with a non-existent network interface name
results in an unexpected duplicate warning message:
$ lszdev --by-interface xx
Could not open directory /sys/class/net/xx: No such file or directory
Could not open directory /sys/class/net/xx: No such file or directory
lszdev: Could not determine device that provides xx (xx)
Fix this by checking for the existence of the associated /sys/class/net
directory before initiating the associated directory traversal.
Reviewed-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
zdev's --by-node option returns exit code 15 (EXIT_RUNTIME_ERROR) when
the specified device node cannot be found. This is inconsistent with
other selection options --by-path and --by-interface which both return
the more appropriate exit code 3 (EXIT_DEVICE_NOT_FOUND).
Fix this by changing --by-node to also return exit code 3 in case the
specified device node does not exist.
Reviewed-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
While changing the helper script to create the ngdump filesystem,
some lines were left in the script which now cause the zipl
installation to fail:
Run /lib/s390-tools/zipl_helper.prepare-ngdump /dev/disk/by-path/ccw-0.0.6a56-part1 0
Couldn't find disk by PARTUUID.
Error: Script could not determine dump parameters
Remove the superfluous lines to fix this.
Fixes: 41108c98aa ("zipl: move mkfs to ngdump prepare script")
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Do not fail to start the daemon if no crypto counters are supported, as
there is still a use case for the daemon to run, as the user can then
use the 'cpacfstats' tool to evaluate that no counter stats are
available. Previously, the user had to check the syslogs for the reason
why the daemon was not running and the cpacfstats command failed.
Before this change:
$ cpacfstats
cpacfstats: Can't access domain socket file '/run/cpacfstatsd_socket', errno=2 [No such file or directory]
cpacfstats: Maybe cpacfstatsd daemon is not running ???
cpacfstats: Can't connect to daemon
After this change:
$ cpacfstats
des counter: unsupported
aes counter: unsupported
sha counter: unsupported
rng counter: unsupported
ecc counter: unsupported
pai_user : unsupported
pai_kernel : unsupported
Also, it's no good practice to let systemd services fail, because
otherwise the system state will be shown as 'degraded':
$ systemctl status
* a46lp59
State: degraded
Jobs: 0 queued
Failed: 1 units
$ systemctl list-units --failed
UNIT LOAD ACTIVE SUB DESCRIPTION
* cpacfstatsd.service loaded failed failed CPACF statistics collection daemon process for Linux on System z
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Print the name of the section which specifes non-existing image
and/or ramdisk files.
It allows to quickly identify problems after using non-atomic tools
manipulating with bootloader settings.
Signed-off-by: Eduard Shishkin <edward6@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The udev-rules generated with the current version of chzdev command
is missing the configuration label, incase of auto configuration,
resulting in an ineffective configuration logic.
Add the missing configuration start label for autoconfig.
Fixes: 2e89722ef0 ("zdev: make site specific udev-rule for ccw")
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
During the boot, the ZDEV_SITE_ID is derived with the help
of loadparm and will be saved in ZDEV_SITE_ID_FILE, which
will be the used by the udev-rules.
ZDEV_SITE_ID_FILE creation can have a surface of symlink attack
as we are directly using the fopen and fprintf on it. To avoid
this, make sure that we are writing the ZDEV_SITE_ID to a temporary
file, which will then be renamed to ZDEV_SITE_ID_FILE, which will
remove all the existing symlinks associated with the target file.
Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
udev does not allow an empty value for keys when importing output
from an external program. Providing an empty value for any key
invokes a warning during the parsing. Currently, ZDEV_SITE_ID for
fallback sites are not assigned any value. Add an empty double
quotes as the value in case of failover sites.
This modification is tested on udevadm version 253 on fedora38.
Also verify that the ZDEV_SITE_ID is properly written, if not log
the error.
Fixes: c8ad5f57d0 ("zdev: modify zdev_id to read the site_id from loadparm")
Reported-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Replace memory allocation functions malloc() and calloc()
by counterparts provided in libutil.a library. Also remove error
handling when no memory could be allocated as those functions do
not return.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Make the listed changes which are needed to re-use some definitions
by the new zipl-debug(8) tool introduced by the next patch in the
series:
. Add definitions to boot_defs.h:
. a named union disk_bloclkptr (instead of the anonymous one);
. a named structure disk_program_table;
. Remove a 'typedef union disk_blockptr_t' from boot/stage2.h
(cleanup), use the named union in boot_defs.h instead;
. Move the definition of scsi_layout types and the function
get_scsi_layout() from install.c to install.h;
. Move definition of PROGRAM_TABLE_BLOCK_SIZE from bootmap.c to
bootmap.h
Signed-off-by: Eduard Shishkin <edward6@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
There are only two users of the `cleanup` label, so let's replace the
goto statements with the label code. This makes the code easier to read.
Especially since another label will be introduced in the next commit.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This patch adds support for Secure Execution with AP pass-through
support for chzcrypt.
chzcrypt details:
* new command: --se-associate <secret-id> <queue device>
* new command: --se-bind <queue device>
* new command: --se-unbind <queue device>
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This patch adds support for Secure Execution with AP pass-through
support for lszcrypt.
lszcrypt details:
* extension to -b: list AP bus features
* extension to -c: now also valid for queue devices, shows
bind and assoicate state in SE environment;
shows MK states (only for current MKs).
* extension to -V: new column SESTAT within an SE guest, shows text
for the BS bits within an SE environment:
"usable", "bond", "avail", "unuse".
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Autoquiesce is a mechanism that tells Linux to stop issuing I/Os to a
specific DASD after certain events.
Add support for configuring related DASD device attributes
that govern the following aspects of autoquiesce:
aq_mask - Configure which events lead to autoquiesce.
aq_requeue - Configure if autoquiesce will requeue all I/O to blocklayer.
aq_timeouts - Configure the number of timeouts before autoquiesce.
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
The 'clean' build targets can be specified alongside other targets,
which causes an immediate removal of build artifacts. Make 'clean'
targets mutually exclusive to avoid this issue and display an error if
'clean' is used in combination with other targets.
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
A subset of s390 tools can be useful on non-s390x architectures such as
x86 or arm. Limit the build targets for these architectures with
'pvattest' and 'libpv' as the first candidates.
A cross compilation on x86 for s390x will still build the entire package
provided that the HOST_ARCH variable is set properly:
$ make HOST_ARCH=s390x CROSS_COMPILE=s390x-linux-gnu-
Cross compilation on s390x for x86 will limit the build targets as
described:
$ make HOST_ARCH=x86_64 CROSS_COMPILE=x86_64-linux-gnu-
Co-developed-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Introduce `BUILD_ARCH` and `(CC|LINK|...|OBJDUMP)_FOR_BUILD` variables
in order to properly support the build of tools that generate code or
data during the build process. Replace existing variables `HOSTCC` with
`CC_FOR_BUILD` and `HOSTCFLAGS` `CFLAGS_FOR_BUILD`. The Makefile
variables for the `HOST_ARCH` are unchanged.
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
In addition, add the ability that a Makefile that includes `common.mak`
can specify the `HOST_ARCH`. Usage example:
$S390_TOOLS/mytool/Makefile:
``` Makefile
HOST_ARCH := s390x
include ../common.mak
```
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
`pkg-config` is a well established tool and all of our required
libraries do provide .pc files. Therefore let's declare `pkg-config` as
required and use it. In addition, remove now useless code.
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Since GCC12 several warnings like the following are produced in
zipl/boot compile targets:
CC zipl/boot/stage2.o
stage2.c: In function ‘start’:
stage2.c:99:24: warning: array subscript 0 is outside array bounds of ‘struct stage2_descr[0]’ [-Warray-bounds]
99 | stage2_descr = *(struct stage2_descr*)STAGE2_DESC;
This is the same issue as reported for the Kernel [1][2]. There is
currently no sane fix available, therefore simply disable the warning
for the zipl/boot/ targets.
[1] https://lore.kernel.org/lkml/yt9dzgkelelc.fsf@linux.ibm.com/
[2] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=99578
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
In certain storage setups the Release Allocated Space (RAS) command to
free up space on the storage server previously allocated for an ESE DASD
might not work. At the moment dasdfmt will error out if RAS is failing.
This however is not ideal for the default case when a user is expecting
dasdfmt to simply format the disk.
One workaround would be to specify --no-discard to disable RAS
completely. However, a sane default handling that tries to work every
time is more reasonable.
Change the default handling as follows: If an ESE is detected default to
QUICK mode and try RAS. If RAS fails, fall back to the FULL format mode
and display a warning accordingly.
If -M (--mode) QUICK is specified explicitly dasdfmt will still error
out on a failing RAS. A combination with --no-discard will still allow
for a QUICK format on an ESE DASD in that case, if desired.
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
`od` in contrast to `xxd` uses the system endianness for displying the
hexdump by default which leads to invalid results on little endian
systems.
Use the `--endian=big` option to fix the endianness problem.
Fixes: 3cc0b4cd ("pvattest/tools: remove xxd dependency from scripts")
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
The script uses bashisms (e.g. `local` keyword) therefore make sure that
bash is used by setting the shebang line to `#!/bin/bash`.
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
icastats is accounted by user and does cover root only today
adding the --all will collect stats for all users
Reported-by: Ingo Franzki <ifranzki@de.ibm.com>
Reviewed-by: Ingo Franzki <ifranzki@de.ibm.com>
Signed-off-by: Joern Siglen <siglen@de.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
For dasd devices, we need to enable the device before we can use it.
Add the required dasd device to the kernel commandline when installing
ngdump to a dasd device.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
The current code first assembles the ngdump init ramdisk, and creates
the filesystem on the dump disk afterwards. ngdump uses uuids to mount
the dump device. Because the filesystem uuid is changing with the final
mkfs, ngdump has to use the partuuid of the device. This does work for
nvme, but not for dasds. Another problem is that dryrun likely wouldn't
work if there's no partition table on the dump device. To fix these
issues, move the mkfs to the ngdump helper script so we can use the
filesystem uuid. When --dryrun is specified the script passes /dev/null
as ngdump device to make mkinitramfs happy. As the initramdisk is never
used in this case, this shouldn't be a problem.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
CCW and LD-IPL records cannot be used at the same time for dumps because
CCW dump uses the standalone dumper, while LD-IPL uses ngdump. The first
one writes data to the raw disk without any filesystem, while the second
one uses an ext filesystem. Therefore we need a way to tell zipl which
kind of dumper it should install, as both cannot be installed at the
same time. The device given is the same for both types, so we cannot use
this to decide which type to install. Therefore add a '--ldipl-dump' option
so the user can decide which type of dump to use.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Eduard Shishkin <edward6@linux.ibm.com>
Acked-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Add the following options to dumpconf so that LDIPL ECKD devices
can be configured for dumping:
br_chr: (optional) location of boot record
device: ccw device
bootprog: boot program selector
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
In order to allow installing only a list-directed ipl entry, remove
the last-table/number-of-tables logic which always required a legacy
program table. With the new code there's no longer a loop in
prepare_bootloader() which requires a certain start index or order
of tables.
Signed-off-by: Eduard Shishkin <edward6@linux.ibm.com>
Acked-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Instead of depending on array index to decide whether we
did already the preparation work for installing the bootloader,
add an explicit skip_prepare flag to struct install_set.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Eduard Shishkin <edward6@linux.ibm.com>
Acked-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
In preparation of decoupling the program table position from
the block pointer format, rename:
PROGRAM_TABLE_0 to LEGACY_BLKPTR_FORMAT_ID
PRAGRAM_TABLE_1 to BLKPTR_FORMAT_ID
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
To make the code easier to maintain and prepare for ECKD LD-IPL,
split up install_bootloader() into two functions: One which is used
for IPL, and one for dump partitions.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
The relative subdirectory path of a build target is determined via a
separate shell command that issues 'cd' and 'pwd'. Spawning a separate
shell is very costly and can lead to extremely slow builds in some
circumstances.
Replace the shell command with the make built-in command 'realpath' to
accomplish the same result more efficiently.
Tested-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Related Valgrind output:
==1073934== 241,722,000 bytes in 30 blocks are definitely lost in loss record 2 of 2
==1073934== at 0x484417C: malloc (in /usr/libexec/valgrind/vgpreload_memcheck-s390x-linux.so)
==1073934== by 0x1006B8D: misc_malloc (misc.c:33)
==1073934== by 0x1006B8D: misc_read_file (misc.c:150)
==1073934== by 0x100DACD: check_common_ipl_data (job.c:774)
==1073934== by 0x100FE2F: check_job_ipl_data (job.c:827)
==1073934== by 0x100FE2F: check_job_menu_data (job.c:999)
==1073934== by 0x100FE2F: check_job_data (job.c:1139)
==1073934== by 0x100FE2F: job_get (job.c:2011)
==1073934== by 0x1006335: main (zipl.c:141)
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Acked-by: Eduard Shishkin <edward6@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Since SMT is being used by default on z systems, hyptop should show
thread utilization by default on both system and system list window.
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Valgrind finding:
==1083976== 19 bytes in 1 blocks are definitely lost in loss record 1 of 1
==1083976== at 0x484417C: malloc (in /usr/libexec/valgrind/vgpreload_memcheck-s390x-linux.so)
==1083976== by 0x48F3C97: __vasprintf_internal (vasprintf.c:71)
==1083976== by 0x1006861: vasprintf (stdio2.h:218)
==1083976== by 0x1006861: misc_asprintf (misc.c:49)
==1083976== by 0x100C7E1: scan_update_bls_path (scan.c:1874)
==1083976== by 0x100FF4B: get_job_from_config_file (job.c:1901)
==1083976== by 0x100FF4B: job_get (job.c:1997)
==1083976== by 0x1006335: main (zipl.c:141)
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Before commit 5fb6434548 ("zipl: add get_common_components() and
finalize_common_address_data()") the default kernel parmline was only
overwritten if a parmline was specified. After the commit it was always
overwritten, even if no parmline was specified. Let's change this
behavior back by adding a NULL-pointer check. For dump types this change
changes the behavior before commit 5fb6434548 ("zipl: add
get_common_components() and finalize_common_address_data()").
Fixes: 5fb6434548 ("zipl: add get_common_components() and finalize_common_address_data()")
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Linux kernel commits
a029a4eab39 ("s390/cpumf: Allow concurrent access for CPU Measurement Counter Facility")
453380318ed ("s390/cpumf: Allow multiple processes to access /dev/hwc")
removed this restriction. Both commits are included in linux 5.16.
Therefore remove the restriction in the man page.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
OpenSSL function i2d_ECDSA_SIG() returns a negative value in case of
an error, so check the returned length for <= zero to detect an error.
Reported-by: Holger Dengler <dengler@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The provider functions OSSL_FUNC_keymgmt_import_types() and
OSSL_FUNC_keymgmt_export_types() do not get the provider context passed.
However, the implementation of these functions in the secure key provider
need the provider context to pass the call to the default provider
and append some of its own types to the result.
Up to now, the provider context was obtained using a global variable
holding the secure key provider handle. This may not be save if multiple
instances of the provider exist.
Just recently OpenSSL added support for an extended form of these
functions, namely OSSL_FUNC_keymgmt_import_types_ex() and
OSSL_FUNC_keymgmt_export_types_ex(), that get the provider context passed
as argument. Make use of these new functions, if compiled against an
OpenSSL version that supports them. For older OpenSSL versions still use
the global variable as before.
See OpenSSL commit 5e3b84505e
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
If system configuration contains zfcp-attached SCSI devices of Peripheral
Device Type disk, but without block device, e.g. because the storage reports
Peripheral Qualifier 1 in INQUIRY, ziorep_config tool issue the
following type of errors during generation of .config file from .cfg
file:
$ ziorep_config -I -i test.cfg
Unpacking configuration ...Done.
Use of uninitialized value in subroutine entry at /usr/sbin/ziorep_config line 36.
Use of uninitialized value in subroutine entry at /usr/sbin/ziorep_config line 36.
Use of uninitialized value in subroutine entry at /usr/sbin/ziorep_config line 54.
Use of uninitialized value in subroutine entry at /usr/sbin/ziorep_config line 135.
...
Such errors can also be seen during printing of adapter, device and map
reports:
$ ziorep_config -ADM -i test.cfg
Unpacking configuration ...Done.
Use of uninitialized value in subroutine entry at /usr/sbin/ziorep_config line 36.
Use of uninitialized value in subroutine entry at /usr/sbin/ziorep_config line 36.
Use of uninitialized value in subroutine entry at /usr/sbin/ziorep_config line 54.
Use of uninitialized value in subroutine entry at /usr/sbin/ziorep_config line 135.
...
This is because ziorep_config reads block device parameters from
non-existent block device subdirectory. And therefore ziorep_config
leaves block device major:minor number column empty in .config file
instead of filling it with 0:0 preset value afterwards.
As a consequence, ziorep_traffic tool, which is using .config file to
get information about devices, reports the following error:
$ ziorep_traffic test
Extracting config data...done
ziorep_traffic: Could not parse line 1 - configuration file broken?
To fix this, skip reading the block device parameters for such
devices, and use the preset values that have been set before
instead.
Signed-off-by: Fedor Loshakov <loshakov@linux.ibm.com>
Suggested-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The value of "generic/dev" exists and can be retrieved directly under
the SCSI device directory, not under the disk block device subdirectory,
where the global variable $c_src points to after
$c_src = $devices{$hctl}{dev}; command.
So move the sg_mm retrieval before the block device parameters
retrieval.
Signed-off-by: Fedor Loshakov <loshakov@linux.ibm.com>
Suggested-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
For a slightly easier development loop add a pseudo compilation of the
zfcpdbf Perl script. This will run the Perl interpreter in syntax-check
mode:
-c causes Perl to check the syntax of the program and then exit
without executing it. Actually, it will execute any "BEGIN",
"UNITCHECK", or "CHECK" blocks and any "use" statements: these are
considered as occurring outside the execution of your program.
"INIT" and "END" blocks, however, will be skipped.
Additionally add the `-w` switch when the Make variable `W` is `1`. This
will print additional warnings about dubious constructs (according to
Perl).
So this pseudo compilation only happens whenever the script is changed
during development create a file `.zfcpdbf.ct` as a result so we can
describe the relationship and dependency in Make. This file can be ignored
otherwise.
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
changes in opencryptoki setup do require some modifications:
- "pkcsconf -mlist" does no longer work in a combined format
- config files have changed
- ep11info was not yet collected
Signed-off-by: Joern Siglen <siglen@de.ibm.com>
Reviewed-by: Ingo Franzki <ifranzki@de.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
With the introduction of zdev for device configuration in v1.33.0,
it used a hardcoded "/" to refer to the root-fs.
Dracut has its own mechanism to find the root file system and to walk its
device dependencies.
Mkdumprd also has its own mechanism to interpret the kdump target
and invokes dracut so that dracut only considers arguments from mkdumprd
without any root-fs dracut would default to [--no-hostonly-default-device].
Use the dracut mechanism to walk device dependencies and individually
have chzdev treat each leaf-node in the dependency tree.
See also https://github.com/dracutdevs/dracut commit
83e0dc7a3dca ("Add for_each_host_dev_and_slaves for device only checking").
This enables the use of dracut options such as --add-device or
--mount used in turn by mkdumprd.
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The function show_devices_argv() iterates over all remaining
arguments. Each argument may specify a single device or a list of
sub-devices. Use a separate index for the inner sub-device loop. This
fixes a bug, that not all or wrong arguments are processed.
Also terminate the outer arguments loop based on the number of
remaining arguments.
Signed-off-by: Holger Dengler <dengler@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The tools lszcrypt provides filter options for card types. Use these
options not only for devices (cards), but also for sub-devices
(domains).
Signed-off-by: Holger Dengler <dengler@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The CEX8 card has in CCA mode a new capability 'stateless
hardware filtering support' which is now displayed as
'H' bit in the FUNCTIONS column and with the -c option.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The current code has different paths to construct the kernel parameters
depending on whether it's a dump kernel or a normal kernel. This would
require adding special handling to get_common_component(), because for
normal kernels the parmline is already set, contrary to dump kernels,
where the command line is constructed later.
To make the code simpler and fix a bug where the default command line no
longer works, move the dump command line processing to an earlier stage.
Also rename the old function to make the function name match what it is
actually doing.
Fixes: 5fb6434548 ("zipl: add get_common_components() and finalize_common_address_data()")
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This avoids exporting explicit settings if it's the default anyway.
I.e. avoid the last line in the example below:
$ chzdev --export - --active --type --all
[active zfcp-lun 0.0.1941:0x500507630904d...:0x4055408f00000000]
scsi_dev/queue_depth=32
Suggested-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Currently, each generated loader binary is linked into one data.o object
file which is then linked against boot.o. The data.o file is also used
to generate the data.h header file using nm, which will contain all
symbols required by zipl.
The linking process is somewhat depended on the directory, as the symbol
names are derived from the file names of the input files, which is the
default behavior of the linker. The file name in this case being the
entire path.
Examples for the current situation (starting from root dir in each case):
$ cd zipl/boot && make eckd0_cdl.bin
$ cc -no-pie -static -nostdlib -Wl,--relocatable -Wl,--format,binary -o data.o eckd0_cdl.bin
$ nm data.o
0000000000000018 D _binary_eckd0_cdl_bin_end
0000000000000018 A _binary_eckd0_cdl_bin_size
0000000000000000 D _binary_eckd0_cdl_bin_start
$ make -C zipl/boot eckd0_cdl.bin
$ cc -no-pie -static -nostdlib -Wl,--relocatable -Wl,--format,binary -o data.o zipl/boot/eckd0_cdl.bin
$ nm data.o
000000000000018 D _binary_zipl_boot_eckd0_cdl_bin_end
000000000000018 A _binary_zipl_boot_eckd0_cdl_bin_size
000000000000000 D _binary_zipl_boot_eckd0_cdl_bin_start
The example above shows that the entire path would end up in the symbol
name if specified that way.
To make this more robust, future proof, and get more control of the
resulting symbol names, use '.incbin' and some macros for embedding the
loader binary files. This also reduces the linker step and the
generation of the data.h header file.
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Co-developed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Use a linker script instead of a linker flags for the layout. While at
it, use common naming `_start` for entry. This change allows us to
simplify the Makefile by using the linker option `-T` for all
bootloaders.
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The stage3b loader memory layout must not be larger than 0x10000 bytes.
Let's check this in the linker script.
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
+ the input section names `.text.init` and `.text.start` aren't
ambiguous, therefore there is no reason so specify a file name
+ discard `.interp` section since no loader is used
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Instead of maintaining an include list, use an exclude list (if
neccessary). This simplifies the `objcopy` calls a lot, and it's
possible because `objcopy -O binary` only includes the memory dump of
the contents of the input object file. [1] This means that sections like
for debug information that do not occupy memory during the process
execution are discarded by design. [2]
In addition, if we do not want a particular ELF section, we can list it
in the discard section of the linker script.
[1] https://man7.org/linux/man-pages/man1/objcopy.1.html
[2] https://man7.org/linux/man-pages/man5/elf.5.html
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This disables the following warning `ld: warning: stag3a.elf has a LOAD
segment with RWX permissions` for newer linker. This changes nothing in
functionality for the bootloaders, since only the binaries and not the
ELF files are actually used.
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Normally, `gcc` takes care of adding the `GNU_STACK` marking except for
assembly code. Therefore, let's add the marking manually. Discard the
`.note.GNU-stack` section in the linker script since it's just a
"message" from the compiler to the linker. This fixes the linker
warning:
ld: warning: entry.o: missing .note.GNU-stack section implies executable stack
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Use linker script for all bootloaders instead of having the load
addresses of the bootloaders hard-coded in the Makefile. This allows us
to simplify the Makefile and it fixes the dependency tracking for the
bootloaders *0.bin, *1.bin, and *1b.bin.
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This allows the reuse of the macro in the next patch. In order to match
the naming scheme rename `STAGE1B_LOAD_ADDR` to `STAGE1B_LOAD_ADDRESS`.
Acked-by: Eduard Shishkin <edward6@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Instead of maintaining an include list, use an exclude list (if
neccessary). This simplifies the `objcopy` calls a lot, and it's
possible because `objcopy -O binary` only includes the memory dump of
the contents of the input object file. [1] This means that sections like
for debug information that do not occupy memory during the process
execution are discarded by design. [2]
In addition, if we do not want a particular ELF section, we can list it
in the discard section of the linker script.
[1] https://man7.org/linux/man-pages/man1/objcopy.1.html
[2] https://man7.org/linux/man-pages/man5/elf.5.html
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This disables the following warning `ld: warning: stage3.exec has a LOAD
segment with RWX permissions` for newer linker. This changes nothing in
functionality for the zipl bootloaders, since only the binaries and not
the ELF files are actually used.
Acked-by: Eduard Shishkin <edward6@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Normally, `gcc` takes care of adding the `GNU_STACK` marking except for
assembly code. Therefore, let's add the marking manually. Discard the
`.note.GNU-stack` section in the linker script since it's just a
"message" from the compiler to the linker. This fixes the linker
warning:
ld: warning: entry.o: missing .note.GNU-stack section implies executable stack
Acked-by: Eduard Shishkin <edward6@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The ELF section `.eh_frame` is used for frame unwinding during, for
example, exception handling and the section `.interp` is used by the
program interpreter. [1] Since no frame unwinding nor a program
interpreter is used for the bootloaders we can discard these input
section.
The content of the (exec|bin) files don't change after this change.
[1] https://refspecs.linuxfoundation.org/LSB_1.2.0/gLSB/specialsections.html
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add support to chreipl/lsreipl to show and reconfigure ipl parameters
for list-directed IPL from ECKD DASD.
Parameters accepted:
device - ccw device id
bootprog - Boot Prog Selector
loadparm - Load parameters
brchr - location of bootrecord in cylinder/head/record format.
clear - clear memory before loading
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
With parameter OSSL_ASYM_CIPHER_PARAM_IMPLICIT_REJECTION one can enable or
disable the implicit rejection mechanism for RSA PKCS#1 v1.5 decryption.
For the default provider, this is enabled by default.
We do not support implicit rejection so far, so disable it for the
default provider operation context when the key contains an RSA secure key,
and reject to set it to anything else then 0 (disabled).
See OpenSSL commit 5ab3ec1bb1
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Since OpenSSL 3.1 a new RSA-PSS salt length constant exists to select
the maximum possible salt length based on the RSA-PSS parameters and the
digest used: OSSL_PKEY_RSA_PSS_SALT_LEN_AUTO_DIGEST_MAX
This is the default salt length when no other salt length is set by
the caller.
In contrast to OSSL_PKEY_RSA_PSS_SALT_LEN_MAX, OSSL_PKEY_RSA_PSS_SALT_LEN_AUTO_DIGEST_MAX
also ensures that the resulting salt length is not larger than the used
digest size. The salt length calculated with OSSL_PKEY_RSA_PSS_SALT_LEN_MAX
may be larger than the digest size, dependent on the RSA-PSS parameters.
FIPS 186-4 section 5 "The RSA Digital Signature Algorithm", subsection
5.5 "PKCS #1" says: "For RSASSA-PSS […] the length (in bytes) of the
salt (sLen) shall satisfy 0 <= sLen <= hLen, where hLen is the length of
the hash function output block (in bytes)."
See OpenSSL commit 6c73ca4a2f
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
With parameter OSSL_SIGNATURE_PARAM_NONCE_TYPE one can choose to generate
a deterministic signature, i.e. using a deterministic nonce K.
We do not support that so far, so reject to set the nonce type to
anything other than 0 (random nonce K).
See OpenSSL commit f3090fc710
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Fix the improper order of resource releasing resulted in failed umount
Do umount after closing (not before)
Fixes: f7d2339 (zipl: List-Directed IPL from ECKD DASD)
Reported-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Tested-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Eduard Shishkin <edward6@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
The library libvmdump is written in C++ and uses exception handling
and class inheritance. The tools vmur and vmconnect are compiled using
the C++ compiler for linking with the libvmdump library.
With integration of vmdump file support into the zgetdump tool and
the removal of vmur vmdump file conversion support there is no need
anymore the vmconvert tool.
With removal of the tool vmconvert, the libvmdump library written in C++
has no more user and can be deleted.
Remove the vmconvert command from the zgetdump man page.
Remove the directories libvmdump and vmconvert and adjust the Makefile.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Suggested-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Remove option -c for implicit dump file conversion from vmdump format
to lkcd format. If option -c is specified, an error message
is printed and the program terminates. A hint to the new conversion
tool zgetdump is shown. Option -c is not listed in the help text.
The man page is also updated to reflect this change.
With zgetdump tool now supporting vmdump file format there is no need to
convert a vmdump file while extracting it from the reader device.
Use commands
1. vmur rec <spool-id> VMDUMP_FILE
2. zgetdump VMDUMP_FILE ELF_FILE
to extract a vmdump file from the reader and convert it to elf format.
Note to Maintainer:
The rename of file vmur.cpp to vmur.c triggers the pre-commit
checking of git-format-clang. This checking fails. This is intended.
The patch shows the changes for this line item.
The pre-commit checking fails on many, many changes not touched
for changed by this patch.
The pre-commit failure should be fixed with a follow-on patch.
Suggested-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Add support for vmdump 64big format to the zgetdump utility.
The result is an elf file suitable for tool crash.
This patch adds file dfi_vmdump.c to handle conversion from
z/VM vmdump format to the internal memory representation of this tool.
Therefore both output formats elf and s390 are supported as target
of the conversion.
The vmdump file formats 32bit and 64bit are not supported anymore.
They have been obsolete since CP version 5.1 (end of service since
30-Sep-2009).
Vector register set is not part of a vmdump file and can not be
displayed.
Output before:
# zgetdump ~/vmdump-0383
zgetdump: No valid dump found on "/root/vmdump-0383"
#
Output after:
# ./zgetdump ~/vmdump-0383 ~/vmdump-0383.elf
Format Info:
Source: vmdump
Target: elf
Copying dump:
00000000 / 00000379 MB
00000379 / 00000379 MB
Success: Dump has been copied
# file ~/vmdump-0383.elf
/root/vmdump-0383.elf: ELF 64-bit MSB core file, IBM S/390, version 1 \
.... (SYSV), SVR4-style, from 'vmlinux'
#
# ./zgetdump -i ~/vmdump-0383
General dump info:
Dump format........: vmdump
Version............: 2
UTS node name......: s8360046.lnxne.boe
UTS kernel release.: 6.1.0-rc2-d-perf+
UTS kernel version.: #1 SMP Fri Oct 28 09:42:13 CEST 2022
System arch........: s390x (64 bit)
CPU count (online).: 2
CPU count (real)...: 2
Dump memory range..: 2048 MB
Memory map:
0000000000000000 - 000000007fffffff (2048 MB)
#
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
The `.check_dep_zgetdump` file is used to cache the result of the
dependency checks and should not be used as input for linking or
anything else. Let's add it as dependency for the objects file. This
shouldn't cause any problems since the Makefile rule for object files is
defined in `common.mak` as follows:
%.o: %.c
$(CC) $(ALL_CPPFLAGS) $(ALL_CFLAGS) -c $< -o $@
Fixes: https://github.com/ibm-s390-linux/s390-tools/issues/147
Fixes: 8d8d5e9746 ("zdump: Fix Makefile dependencies")
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Enforce that the first glib.h include is done via glib-helper.h for libpv
so that glib version checks are in place.
Change zdump and pvattest such that they never include glibstuff before
libpv/glib-helper.h
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Since coreutils v9.1 commit 8f31074cb ("chown: warn about USER.GROUP")
chown utility now warns about using of wrong separator for USER and
GROUP options. This leads to warnings during intall step in ziomon:
$ make install
INSTALL ziomon
SED ziomon/install
chown: warning: '.' should be ':': ‘root.root’
SED ziomon/install
chown: warning: '.' should be ':': ‘root.root’
SED ziomon/install
chown: warning: '.' should be ':': ‘root.root’
To fix those warnings use ':' as separator instead of '.'. With this
patch applied those warnings are no longer present.
Signed-off-by: Fedor Loshakov <loshakov@linux.ibm.com>
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
As on space problems the packing may fail, incomplete tgz are send.
Today no evidence for this is in dbginfo.log, packed upfront into the tgz.
This update helps to identify space related corruption of tgz files.
Reviewed-by: Mario Held <mario.held@de.ibm.com>
Signed-off-by: Joern Siglen <siglen@de.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
When the kernel is build with CONFIG_NVME_MULTIPATH enabled and an NVMe
where the driver exposes its controller separately is used, chreipl node
on a mount point of the NVMe fails. The failure occurs because chreipl
tries to get the function_id from the NVMe's nvmeXnY block device via
the path '/sys/block/nvmeXnY/device/device/function_id' which does not
exist.
The underlying problem is that with NVMe multipath support the PCI
function is not associated directly with a particular NVMe namespace but
instead with the entire NVMe device which may host multiple NVMe
namespaces. The correct way to get from the block device to the
underlying PCI device and its function ID is then to extract the device
name i.e. the 'nvmeX' part from 'nvmeXnY' and use that to get the
function ID via '/sys/class/nvme/nvme<X>/device/function_id'.
Fixes: 0472b5ea5c ("ipl-tools: Add nvme device support to lsreipl/chreipl")
Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
xxd has vim-common as a dependency. We can avoid that by using od
instead which is from coreutils.
While at it, add the require_command function from the
pvattest-info script to the pvextract-hdr script and use it.
Suggested-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Fix issue in the lszdev command where column names if using the --pairs
command line switch can contain characters that are not allowed to be
used as variable names in a shell environment.
Replace bad characters in column names by an underscore if the --shell
command line switch is specified along with the --pairs switch.
The additional --shell switch mimics what is already available in the
lsblk command and thus it shall be used along with the --pairs switch.
Signed-off-by: Daniel S. Haischt <modean@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
The proc_sum_t struct is defined with the packed attribute and
produces the following compile warning:
mon_procd.c: In function ‘read_cpu’:
mon_procd.c:351:27: warning: taking address of packed member of ‘struct proc_sum_t’ may result in an unaligned pointer value [-Waddress-of-packed-member]
351 | cal_cpu(&cpudata, &proc_sum.cpu);
| ^~~~~~~~~~~~~
Silence the warning with -Wno-address-of-packed-member compile flag
since the struct is required to be as is.
Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
The struct scsi_dump_sb is defined with the __packed attribute and
produces the following compile warning in zfcpdump:
zfcpdump_part.c: In function ‘csum_update’:
zfcpdump_part.c:125:41: warning: taking address of packed member of ‘struct scsi_dump_sb’ may result in an unaligned pointer value [-Waddress-of-packed-member]
125 | dump_sb.csum_size, &dump_sb.csum)) {
| ^~~~~~~~~~~~~
However, all members are of the same size and the __packed attribute is
unnecessary. Remove the attribute to get rid of the warning.
Add assertion to ensure correct size of the struct during compile time.
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
The 'unistd.h' header was missing. Under some circumstances the
-D_GNU_SOURCE gcc flag does not trigger including that file.
Therefore, explicitly include this file here.
Fixes: e1aec24e84 ("libutil: introduce util_lockfile")
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
mdevctl has been updated to use /usr/lib/mdevctl/scripts.d/callouts/
instead of /etc/mdevctl.d/scripts.d/callouts/. The /etc location
is considered deprecated, meaning mdevctl will also look at that
location for now but might eventually stop looking in /etc for
callout scripts.
Based on that, update the installation location for the ap-check
callout. However, because older versions of mdevctl will still
only look in /etc, let's also put a wrapper script in /etc for now
to provide backward compatibility, and plan to remove it at a
later time.
Link: df6bb57429
Fixes: https://github.com/ibm-s390-linux/s390-tools/issues/139
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Commit ae7217806b ("common.mak: remove `LINK` and `LINKXX`") changed
the LINK and LINKXX definition to ensure that the same compiler is used
for compilation and linking when specified with CC= (or CXX=
respectively) on the commandline.
However, the commit also removed the pretty print for both commands. Add
the pretty print back in and use the already defined $(CC) and $(CXX)
variables to preserve the original change.
Fixes: ae7217806b ("common.mak: remove `LINK` and `LINKXX`")
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Check the dump provided sizes for reasonableness. This avoids that a
corrupted dump leads to allocation of large buffers on the heap.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Verify that the size is large enough before doing the mmap. Otherwise
this can result in a SIGBUS signal if there is an attempt to access a
page that lies beyond the end of the mapped file (see `man 2 mmap`).
Fixes: 8fa1b5a00b ("zdump: dfi: add support to read Protected Virtualization dumps")
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Corrupted dumps might have invalid page states. Therefore, let's convert
the assertions into errors.
Fixes: 8fa1b5a00b ("zdump: dfi: add support to read Protected Virtualization dumps")
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Make zipl tool prepare ECKD DASD for booting by different IPL
programs (with the same boot record installed).
Besides standard CCW-type IPL, user gets an ability to trigger
(with the same boot record installed!) List-Directed IPL. This
allows to use the feature of secure boot from ECKD DASD (which
is not available for CCW-type IPL).
When using the old boot interfaces, the usual CCW-type IPL is
triggered for DASD. Also for compatibility reasons zipl(8) tool
is modified to create and install one, or two "similar" program
tables per boot partition, depending on job and disk type. The
"similar" program tables differ only in block pointers format.
The old IPL programs (CCW-type IPL) use program table based on the
old format.
All program tables are packed to the same bootmap file. Their
order and logical offsets in the file are not significant (not
used by anyone).
The picture below shows which program table is used for IPL of
specified type from disk of specified type. Here "0" and "1" are
identifiers of program tables based on the old and new block
pointers format respectively. E.g. program table "0" is used for
CCW-type IPL from ECKD DASD. LD-IPL from DASD FBA is unsupported
(respectively, only one program table "0" is used), etc.
CCW-IPL LD-IPL
SCSI X 0
DASD FBA 0 X
ECKD DASD LDL 0 X
ECKD DASD CDL 0 1
Signed-off-by: Eduard Shishkin <edward6@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add an option to tunedasd to trigger a copy pair swap using the appropriate
ioctl for DASD devices.
-s, --copy-pair-swap COPY_PAIR
This command requires a comma separated pair of primary,secondary to be
specified. In case of success the old secondary will become the new primary
device and the old primary will become a secondary device.
Example:
tunedasd /dev/dasda -s 0.0.9700,0.0.9740
This will set the old secondary device 0.0.9740 as the new primary.
The old primary device 0.0.9700 will automatically become a secondary
device.
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
In case of an error the ioctl macro only returns errno to the calling
function.
This misses positive returncodes from ioctls.
Change the macro to also return positive return codes.
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The DASD device driver has a new attribute copy_pair to make storage
server copy pairs known to the driver.
Add this attribute to zdev.
Usage example:
Add two copy pairs 1000,2000 and 1000,3000 to a DASD device 1000
$ chzdev dasd 1000 copy_pairs=1000,2000 copy_pairs=1000,3000
or
$ chzdev dasd 1000 copy_pairs="1000,2000 1000,3000"
To add a third copy pair later on:
$ chzdev dasd 1000 copy_pairs=1000,4000
To remove all copy pairs from the device 1000:
$ chzdev dasd 1000 -r copy_pairs
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add an option -P|--copy-pairs to show all DASD devices with copy
relations set up in the system and their roles.
The output looks like:
# ./s390-tools/zconf/lsdasd -h
[...]
-P|--copy-pairs
Print information about copy pairs.
# ./s390-tools/zconf/lsdasd -P
Bus-ID Role Name Paired devices
================================================================================
0.0.9700 primary dasdd 0.0.9740,0.0.9743,0.0.9744,0.0.9745
0.0.9740 secondary 0.0.9700
0.0.9701 primary dasdf 0.0.9741
0.0.9741 secondary 0.0.9701
0.0.9702 primary dasdh 0.0.9742
0.0.9742 secondary 0.0.9702
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Adds util_lockfile_example.c, which can be used to sample
util_lockfile support.
To acquire a lock using a parent PID (e.g. your shell instance):
util_lockfile_exmample -f <path> -l <retries>
To release the lock using the parent PID:
util_lockfile_example -f <path> -r
To acquire the lock, sleep briefly, and then release the lock
using the PID of the util_lockfile_example process:
util_lockfile_example -f <path> -L <retries>
In each example, the <path> is the location of the desired lockfile
and <retries> is the number of times to retry acquiring the lock
if it fails.
GitHub-ID: https://github.com/ibm-s390-linux/s390-tools/issues/142
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Implement simple file-locking routines that use process PIDs for stale
lock detection. The implementation is meant to be a simplified subset of
what liblockfile was previously being used for by libap, allowing the
external dependency to be removed.
This initial implementation provides a series of functions that allow for
creating/release file locks using either the current process PID or the
PID of the current process parent. When creating a file lock, first a
temporary file is created and the appropriate PID (either this process
PID or the parent process PID) is placed in the file to specify the owner
of the lock. Then an attempt is made to link that file to the desired
file location; if this succeeds, the lock is now held on behalf of the
specified PID. If it fails, this implies the file already exists
(meaning the lock is already held). In this case, stale lock detection
is performed by reading the PID from the file and ensuring that the
associated process still exists -- if it does not, then the lock is
presumed stale and destroyed. If the process still exists, then either
the lock request fails or the caller will sleep and retry, depending on
an optional retry setting.
A lock remains valid until either 1) it is released via the corresponding
util_lockfile function, which will delete the corresponding file 2) the
associated PID no longer exists, which leaves the file in-place but will
cause it to be destroyed the next time a different process attempts to
lock that file or 3) the file is directly removed (e.g. rm).
A typical usecase for such support would be to provide a means for
multiple invocations of the same (or different) tools to ensure that they
do not access the same shared resource simultaneously. For example,
ap-check, chzdev and lszdev all have a need to view and/or modify the AP
and vfio-ap configuration files; util_lockfile can be used to ensure that
only one instance of any of these utilities do that at a time by ensuring
they all use the same lockfile.
Additionally, providing the ability to specify the parent PID rather than
the current PID allows for a general purpose tool (like mdevctl) to
invoke a sub-program (ap-check) to acquire and release a lockfile as
necssary while allowing stale lock detection to be controlled by that
parent PID, allowing the lock to remain held over multiple sub-program
invocations.
Note that this implementation is sufficient for our current usage (e.g.
lockfiles placed in tmpfs) but does not take into consideration things
like NFS, which a more complete lockfile solution like liblockfile does.
GitHub-ID: https://github.com/ibm-s390-linux/s390-tools/issues/142
Suggested-by: Luca BRUNO <luca.bruno@coreos.com>
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Set up the secure_boot_supported global variable at the
function bootmap_create() instead of bootmap_create_device()
to make sure that the secure boot status is checked for all
relevant jobs.
Fixes: 7b369318dd ("zipl: check for secure boot once")
Signed-off-by: Eduard Shishkin <edward6@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Sometimes dumping a virtual machine from the outside is the only way to
get the data that is needed. This can be the case if a dumping mechanism
like kdump hasn't been configured or data needs to be fetched at a
specific point. Dumping a protected guest from the outside without help
from FW/HW doesn't yield sufficient data to be useful. Hence we have
introduced Protected Virtualization (PV) dump support - also named
confidential dump support.
The confidential dump support works by integrating the firmware into the
dump process. New Ultravisor calls (UVC) are used to initiate the dump
process, dump CPU data, dump memory state and lastly complete the dump
process. The guest's data is fully encrypted and can only be decrypted
by the entity that owns the customer communication key (CCK) for the
dumped guest. The output format is very similar the normal s390 vmcore
ELF format, it's only enriched by new sections where the returned data
from the UVC "Complete Configuration Dump" and the UVC "Dump
Configuration Storage State" is stored. The encrypted CPU data is stored
in a new note type `NT_S390_PV_CPU_DATA`. The old note types do still
exists but without any confidential data stored. The memory data is
stored in the LOAD segment as usual but for PV dumps it's fully AES-XTS
encrypted.
This commit adds support for reading/decrypting PV guest dumps to
zgetdump by introducing a new DFI input module (`dfi_pv_elf.c`). For
specifying the customer communication key a new command line option
`--key` is added.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The functionalities of libpv are used in the next patch. Libpv itself
requires glib2 and libcrypto.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Consolidate error reporting to make sure that error messages are used
consistently. In addition, don't call `zg_exit()` directly, but instead
return the value 1 in `main()`.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Acked-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Prevent double free/close that happens in get_multipath_status()
when the output of "dmsetup status XXX" is empty
Fixes: 599b141 ("zipl: Rewrite helper script in C")
Signed-off-by: Eduard Shishkin <edward6@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Adapt the wrappers `zg_alloc`, `zg_realloc` and `zg_ioctl` to match the
signatures used by `calloc`, `realloc` and `ioctl`.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
lshwc displays counter values extracted from the /dev/hwctr device.
The counter values are retrieved using a loop and incremented instead
of just displayed on output.
This leads to the situation where a counter is incremented in large
numbers while the counter triggering program is active. When this
program terminates, the counter should not increase but remain steady.
This is not the case as this example shows:
# lshwc -i 2 -l90 -a :a | fgrep Total | \
awk -F ',' '{print $2 "," $152 "," $157}'
Report time and values of DFLT_ACCESS and DFLT_CC counters
sleep 10
# DFLTCC=1 python3 -c "import zlib; zlib.compress(b'A'*6000000000);
Increment counter DFLT_ACCESS and DFLT_CC, runs about 45 seconds
Output before:
15:24:20,0,0
15:24:22,0,0
15:24:24,0,0
15:24:26,0,0
15:24:28,0,0
15:24:30,0,0
15:24:32,2067027,592996481 <--- python3 program start
15:24:34,6953101,2039012580
15:24:36,14494585,4264340060
15:24:38,24759568,7346128396
....
15:24:56,232929262,70526362509
15:24:58,269037963,81464038124
15:25:00,307757248,93171809261
15:25:02,348900718,105620730492
15:25:04,392646075,118841031269 <--- python3 program stop
15:25:06,438956016,132853968029 <-- Value column two increased by 49148217
15:25:08,488104233,147709011658 <-- Similar high increase
The reason is that lshwc takes the last read counter value and keeps
adding it to the total count, even if there zero delta to the previous
read value. Fix this by clearing the total count value between ioctl()
read operations.
Output after:
15:39:26,0,0
15:39:28,0,0
15:39:30,0,0
15:39:32,0,0
15:39:34,0,0
15:39:36,1367250,380721127 <--- python3 program start
15:39:38,4104791,1108181711
15:39:40,6740994,1858843730
15:39:42,9277545,2646351211
15:39:44,11895180,3444375804
....
15:40:16,54060774,16315924126
15:40:18,57830349,17513712210
15:40:20,61628170,18690791102
15:40:22,65410470,19864086006
15:40:24,69070765,21028646754 <--- python3 program stop
15:40:26,70429758,21472772340 <-- No increase of value in column two
15:40:28,70429758,21472772340
15:40:30,70429758,21472772340
15:40:32,70429758,21472772340
15:40:34,70429758,21472772340
15:40:36,70429758,21472772340
15:40:38,70429758,21472772340
Fixes: 27a562da0a ("cpumf/lshwc: Program to extract complete counter sets")
Reported-by: Axel Busch <Axel.Busch@ibm.com>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
pai dumps core when invoked with summary flag -S and
certain painnpa.XXXXX data files:
# ~/s390-tools/cpumf/pai -r -S
Segmentation fault (core dumped)
#
Fix this and check the existence of event raw data before
reading it. This avoid accessing NULL pointer trying to read raw
data when no counter values have been appended as raw data by the
kernel.
Fixes: dc73c77d73 ("cpumf/pai: Omit detailed event information when summary flag selected")
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Export and import the configurations with zdev:early on the
site-specific configurations as well. Filter the site-specific
configurations by attribute "zdev:early" and import the output
to the corresponding sites.
Note that --site parameter does not work with the device type.
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add export and import support for site-specific settings. For each
site-specific configuration, a new site-block will be generated as
below. The same format can be interpreted by the import function and use
the values on the device's site-specific configuration.
Typical example of a site-block in the export file:
[site3 dasd-fba 0.0.f001]
online=1
cmb_enable=0
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Introduce --deconfigure-all feature, which will remove all available
settings from the mentioned device. A typical device can have 10
different site-specific settings, active settings, persistent
settings and sometimes auto-configured settings configured in it.
--deconfigure-all can be used to remove all of them with a single
command.
usage: chzdev -D <device-id>
chzdev --deconfigure-all <device-id>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
lszdev must be modified to share the site-specific configuration
information from the persistent settings. The persistent configuration
array will be read and tabularized based on the site-id input from the
user.
This patch also accommodates the site specific information in the
lszdev --info command. New information about the site-ids are integrated
with the command. For example,
DEVICE dasd-eckd 0.0.f001
Names : -
Modules : dasd_eckd_mod dasd_mod
Online : no
Exists : yes
Persistent : yes
Sites : 1,2
ATTRIBUTE ACTIVE PERSISTENT SITE1 SITE2
cmb_enable "0" "0" "1" -
eer_enabled "0" - - -
erplog "0" - - -
failfast "0" - - -
last_known_reservation_state "none" - - -
online "0" "1" "1" "1"
raw_track_access "0" - - -
readonly "0" - - -
reservation_policy "ignore" - - -
use_diag "0" - - -
Each available site specific configuration will be shown as column. The
"Sites" parameter in the above output indicates the available site
configurations and the SITE1 and SITE2 colums indicates the detailed
configuration for the respective sites.
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Modify the dev_get_setting_list function to get the site-specific
attributes of the device. The new site_id parameter for this function
must be less than SITE_FALLBACK to read the site-specific attributes.
As SITE_FALLBACK setting is same as persistent setting, we do not need
a separate read function for it.
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The udev-rules must be modified to make it site-specific. The site
specific part of the rule should be executed only on the sites where the
devices belong. Change the generic udev rule to support the site-specific
udev-rule.
During boot, the current site-id is read from the LOADPARM which is
located at /sys/firmware/ipl. The zdev_id command reads this LOADPARM
and prints the SITE_ID based on the value. This SITE_ID is the
current site where the udev-rule is executing. Based on this assumption,
the rule is divided in to multiple blocks where each site block is executed
only for the corresponding sites.
The rule executes based on the value read from the LOADPARM.
1. When the LOADPARM specifies a site-id and if the current device has
an associated configuration settings, it will be used.
2. When the LOADPARM specifies a site, and the current device does not
have any associated configuration set, the udev rule uses the
fallback configuration settings.
3. If the device does not have a fallback-configuration settings or any
site-specific settings, no configurations will be used.
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The currently active site can be found from the loadparm attribute which
is located at /sys/firmware/ipl/loadparm. Read the value of loadparm and
extract the site_id.
The loadparm is an 8 byte alphanumerical IPL parameter. The content of
loadparm can be of different forms to indicate different boot menu
options, which are used by Linux for selecting the respective boot menu
entries. To indicate the site-id, loadparm adds a 'S' character. Where,
the following character after 'S' indicates either the site-id or
indivcation to derive the site-id from SSID.
For example,
If the loadparm value is Sn,'n' is the integer which could be one of the
valid site_ids from 0 to 9; i.e when booted on site-1, loadparm value will
be S1.
If loadparm value is "SS", zdev_id extracts the site_id from the SSID of
the current ipl device. For ccw and zfcp devices, the current ipl device-id
can be found at /sys/firmware/ipl/device.
In any case, if the loadparm contains invalid value, or empty, the
site_id will be default to the common-site.
After the first invocation of the zdev_id from udev-rule, the site-id
information is stored in /run/zdev_id.env file. This will reduce the
number of further invocation of zdev_id from within udev-rules.
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Currently zdev supports the configuration and maintenance of one single
persistent device state. With the introduction of sites, zdev should be
able to store, configure and maintaine NUM_SITES number of states in
the persistent configuration. This patch modifies the struct device and
adds a new site_specific device_state array, which stores the
persistent configuration for all the available sites.
Total number of available sites are configured with NUM_SITES. Where,
10 site-specific configurations and 1 common configuration.
1. during read, all site data is always read and update the
site_specific[] array.
2. dev->persistent is a copy of dev->site_specific[global_site_id]
3. modifications are only done on dev->persistent, and during write
dev->persistent overlays dev->site_specific[global_site_id]
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
In some high-availability setups, root and boot disks of a Linux
installation are copied to remote sites that can take over execution
of a Linux workload in case of an outage of the original site.
A site in this context is an execution environment such as an LPAR
or z/VM guest.
Each site may provide a different set of devices, or require different
parameters to be applied per device. chzdev supports site-specific
device configuration for up to 10 sites. Each site is identified by
a number in the range 0 to 9. You can provide a separate set of persistent
device configuration for each site. The IPL Load parameter value specified
during boot determines the currently active site. Only the device
configuration of the active site is applied during boot and when new
devices become available. A common configuration can be provided that is
applied when no site-specific configuration is available for a device in
the active site.
User can use the --site parameter to configure devices for a specific
site only. Configuration actions without a site parameter apply to the
common configuration.
During the boot, the active site configuration is chosed based on the
IPL LOADPARM variable. If the LOADPARM contains no valid site-id (0 to 9),
the fallback-site id will be used. The fallback-site-id can also be
configured with the zdev tools by not specifying the --site parameter.
Some of the new chzdev/lszdev commands with site-parameter can be as
follows
1. chzdev -ep f001 --site 3
This command is used to configure the device f001 for the site 3. During
boot, if the LOADPARM value is S3, this device configuration will be
used.
2. lszdev --site 3
This command lists all the devices which are configured for site 3.
3. chzdev -ep f001
Above command does not have a --site parameter. This device settings
will be used for the following conditions
1. When the loadparm specifies a site, (e.g S3), and the device does not
have an associated config-set, zdev uses fallback config set.
2. When the loadparm does not specify any site information, then the
fallback config set will be used.
When the loadparm specifies a site, and the device does not have an
associated config set, nor a fallback site, nothing is configured for this
device.
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
While at it, add a list with words to ignore. This suppresses the following codespell finding:
$ codespell libcpumf/libcpumf_cpuset.c
libcpumf/libcpumf_cpuset.c:15: parm ==> param, pram, parma
libcpumf/libcpumf_cpuset.c:17: parm ==> param, pram, parma
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Provie a CheckPatch configuration file and mention it in the coding style
guidelines (this feature was introduced with CheckPatch version 0.32 ~11 years
ago).
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add a .clang-format configuration and mention it in the coding guidelines.
Usage example:
$ clang-format -i **/*.[ch]
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
When configuring a vfio-ap device, specifying only control domains
without any usage domains results in a useless configuration in that
both adapters and usage domains are required to make cryptographic
resources available to the guest. Without that, the control domains
are useless. While the kernel allows this, let's reject this
combination with a message.
Suggested-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com>
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This patch enhances the zipl stage3 loader image adding a trailer as
required for secure boot by future firmware versions.
Note: with the change in this patch the padding via objcopy command line
options is replaced by padding via linker script directives with the
same effect.
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
lszcrypt allows the explicit definition of a list of devices. Continue
the parameter processing if multiple devices are specified.
Signed-off-by: Holger Dengler <dengler@linux.ibm.com>
Reviewed-By: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
In an upcoming patch the refactored function `pt_load_add` is reused. While at
it, add a wrap-around check to `pt_load_add`, replace `g.opts.device` access
with `fh->path` (this makes this function easier testable) and improve the
documentation.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Remove `static` attribute from `print_usage_exit` and declare it in the header
file `opts.h`. The function will be reused in a later patch.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Caller of `dfi_vmcoreinfo_get` must not modify the returned value, therefore
return a `const char *` value for `dfi_vmcoreinfo_get`.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add guarded storage registers support for the ELF input and the ELF output
format. See `man 2 s390_guarded_storage` for details about guarded storage.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The maximum size of all supported ELF note entries for a CPU can be 0x4a4 bytes
and not 0x4a0. Use a function for the calculation so it's easier to maintain.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Currently, only the ELF version `1` is defined by the ELF specification. See
`man 5 elf` for details. Therefore of course, we do only support this version.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The functions are refactored so the `struct zg_fh` value is now passed as
argument to the `nt_*` functions instead of accessing the global variable `g.fh`
from within of the functions. This makes the functions reusable and easier to
test. While at it, improve the documentation of `nt_read`.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Introduce variable `phdrs` and shrink the scope of `phdr`. This removes
duplicated code `&phdr[i]` and makes the code easier to read. While at it,
constify the parameter of `pt_notes_add`.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
`ehdr->e_phoff` has the type `Elf64_Off` and this maps to `uint64_t`, but `off_t` is signed. Let's
add a check for this.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
generalize the collection step name from "docker" to "container host"
initial version of adding data collection for OCP.
all log file content might be too much for most installations
Reviewed-by: Alexander Klein <alkl@de.ibm.com>
Reviewed-by: Mario Held <mario.held@de.ibm.com>
Reviewed-by: Mike Storzer <mstorzer@de.ibm.com>
Signed-off-by: Joern Siglen <siglen@de.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
GUINT32_TO_BE and GUINT32_FROM_BE do exactly the same in case of glib2, just the
naming differs. However, at this point the conversion is from be to system
endianness therefore `GUINT32_FROM_BE` is the proper macro.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
It's often useful to know how much data was actually copied, therefore let's
introduce an nullable parameter `@copied` to `pv_gbytes_memcpy`.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
...by adding a compile time assertion about the buffer size. While at it, report
the actual user data size in case of an error.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The endianness handling was only partially implemented for uvio.c. Let's remove
it since doesn't make much sense here, because the IOCTL must be build on the
same system where they're actually executed.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
the buffer sizing did not work any longer
add explaining comments and rework the variable names for claritiy
refering commit f7cc14753cc9d930af804e2ac3ce108a12145db6
Reported-by: Mike Storzer <MSTORZER@de.ibm.com>
Reviewed-by: Mario Held <mario.held@de.ibm.com>
Signed-off-by: Joern Siglen <siglen@de.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Use `PV_CERT_ERROR` error domain whenever useful. Currently, it's only used
internally in libpv and therefore there is no problem in changing it.
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
There should be no problem with this change since the changed value was never
used. Therefore, let's remove the assignment and declare the parameter as const
to prevent such a behavior in the future.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The machine types are not strictly increasing anymore since Z16, therefore,
we cannot use numerical comparison to find out the correct HSA size
of a machine.
Fixes: 2515832469 ("util_arch: Add IBM z16 as known machine")
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
`afl-clang` requires a white space between a option name and the option value.
Therefore let's fix this for `-xc` by adding a white space.
How to reproduce:
$ make -C zdump CC=afl-clang-fast LINK=afl-clang-fast
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
some versions of /bin/dash do interpreted our commands different, which
causes a variable failure and termination of the script.
e.g. a new line char "\n" will split the cmd_type to a multiple line variable
not working with the followup commands. adding the head command does avoid
multiline variables now.
Problem found in Ubuntu 20.4 and some older Ubuntu versions
Reviewed-by: Mario Held <mario.held@de.ibm.com>
Signed-off-by: Joern Siglen <siglen@de.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
move tool checking to the top of the script and add the output to
the check function (-c) for easy verifivation and testing
Reviewed-by: Mario Held <mario.held@de.ibm.com>
Signed-off-by: Joern Siglen <siglen@de.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
All debian distors use the dash shell as default, where type is not supprting "-t" parameter
Remove of "-t" where not important and change type check not using -t
Reviewed-by: Mario Held <mario.held@de.ibm.com>
Signed-off-by: Joern Siglen <siglen@de.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Easier to read for a first glimpse than the (still required) full config.
$ man multipathd
list|show config local
Show the currently used configuration like show config, but lim‐
iting the devices section to those devices that are actually
present in the system.
Works as of multipath-tools 0.7.8 commit
c23924dc74ee ("multipathd: implement "show config local"")
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
==660622== 385 bytes in 7 blocks are definitely lost in loss record 30 of 37
==660622== at 0x484417C: malloc (in /usr/libexec/valgrind/vgpreload_memcheck-s390x-linux.so)
==660622== by 0x4E93BD7: strdup (strdup.c:42)
==660622== by 0x11249F: zg_strdup (zg.c:115)
==660622== by 0x11249F: zg_open (zg.c:164)
==660622== by 0x114FBF: dfi_dump_open (dfi.c:750)
==660622== by 0x114FBF: dfi_init (dfi.c:772)
==660622== by 0x111465: do_copy (zgetdump.c:192)
==660622== by 0x111465: main (zgetdump.c:216)
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
we do miss a simple way to see the dbginfo.sh version used by the
customer for the debug generation. saving the version now to dbginfo.log
Reported-by: Mike Storzer <MSTORZER@de.ibm.com>
Reviewed-by: Mario Held <mario.held@de.ibm.com>
Signed-off-by: Joern Siglen <siglen@de.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Although the previous patch enables pvattest to display the
config UID this script enables the user to extract the config UID of
the SE-guest and the additional data if specified. This allows users of
pvattest v2.22.0 to view the config UID without examining binary blobs.
$ ./pvattest-info attresult.bin
Config UID:
1a1a1a1a1a1a1a1a1a1a1a1a1a1a1a1a
Additional Data:
1b1b1b1b1b1b1b1b1b1b1b1b1b1b1b1b1b1b1b1b1b1b1b1b1b1b1b1b1b1b
1b1b
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
In verbose mode (-v) `pvattest verify´ now also prints
"Attestation measurement verified", if the verification was successful and the
Config UID of the SE-guest and any additional data if available.
$ pvattest -V verify [...]
Attestation measurement verified
Config UID:
1a1a1a1a1a1a1a1a1a1a1a1a1a1a1a1a
Additional Data:
1b1b1b1b1b1b1b1b1b1b1b1b1b1b1b1b
1b1b1b1b1b1b1b1b1b1b1b1b1b1b1b1b
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Change the name of `hexdump´ to `pvattest_log_bytes´. Additionally, allow
that function to dump the bytes as a single hexadecimal number.
Change the name of `printf_hexdump´ to `pvattest_hexdump´.
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Map the Ultravisor return code 0x2 to "Invalid UV command" string. This
results in better error messages.
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The dracut installation directory is referenced from `chreipl-fcp-mpath`,
`zdev`, and `zipl`; in each with its own individual definition and
variable name. This makes it unnecessarily hard to change it when
installing from the top level directory of s390-tools and passing
variable overwrites via the command line.
Fix this by defining a common `DRACUTDIR` variable in the shared
`common.mak` file, and referencing this in each tool as base directory.
With this a user can simply pass `DRACUTDIR=/foo/bar/baz` on the
commandline and change the installation for all three tools.
Further, also derive common `DRACUTCONFDIR` and `DRACUTMODDIR` variables
from `DRACUTDIR` in `common.mak`, so that `zdev` and `zipl` don't use
different variable names for the same directory anymore, and all these
are defined together in a common place.
Semantically nothing changes for a default build/installation.
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
UDEVDIR is used in both `chreipl-fcp-mpath` and `zdev`, but with a
different meaning. In the former it points to the base udev directory,
not the rules directory; in the later it points to the rules directory.
If someone was to call `make` from the top level directory, and set
UDEVDIR for the whole build/installation, it would either break `zdev`
or `chreipl-fcp-mpath` (depending on what it was set to).
Fix this by pulling the definition of it in the shared `common.mak`
file, and giving it a common meaning. Point UDEVDIR to the base udev
directory, and UDEVRULESDIR to the rules directory below it.
Semantically nothing changes for a default build/installation.
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Fixes a bug that leads to a segmentation fault when no parmline is
provided.
Fixes: 11b401b5 ("zipl: move and make check for maximum command line length dynamic")
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Fixes a bug that make still tried to build pvattest even when the
compilation of pvattest was turned off.
This lead to a build bug when one of the dependencies was not met.
Also fixes the check of the OpenSSL version at build time.
Fixes: 3ab06d77 ("pvattest: Create, perform, and verify attestation measurements")
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Fixes a bug that make still tried to build libpv even when the
compilation of libpv was turned off.
This lead to a build bug when one of the dependencies was not met.
Also fixes the check of the OpenSSL version at build time.i
Fixes: 38639269 ("libpv: New library for PV tools")
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
pv_BIO_reset() wrongfully handled the BIO_reset() rc for non-file-backed BIOs.
This is currently not an issue as the only non-file BIO used cannot fail
at BIO_reset()
Fixes: 3ab06d77fb ("pvattest: Create, perform, and verify attestation measurements")
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The returncode handling for BIO_reset() was wrong when handling with
file based BIOs.
This resulted in a bug that DER formated certificates cannot be read
by genprotimg which is now fixed.
Fixes: d90344a2 (genprotimg: check return value of BIO_reset)
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
dasdfmt.c: In function ‘dasdfmt_write_labels’:
dasdfmt.c:1110:22: warning: ‘write’ reading 88 bytes from a region of size 4 [-Wstringop-overread]
1110 | rc = write(fd, &vlabel->vollbl, (sizeof(*vlabel)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1111 | - sizeof(vlabel->volkey)));
| ~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from dasdfmt.c:23:
../include/lib/vtoc.h:84:14: note: source object ‘vollbl’ of size 4
84 | char vollbl[4]; /* volume label */
| ^~~~~~
In file included from ../include/lib/util_opt.h:16,
from dasdfmt.c:20:
/usr/include/unistd.h:378:16: note: in a call to function ‘write’ declared with attribute ‘access (read_only, 2, 3)’
378 | extern ssize_t write (int __fd, const void *__buf, size_t __n) __wur
| ^~~~~
GitHub-ID: https://github.com/ibm-s390-linux/s390-tools/pull/137
Signed-off-by: Dan Horák <dan@danny.cz>
Acked-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Replace strncpy() with util_strlcpy() which provides the required
semantic.
In function ‘dasdview_print_format1’,
inlined from ‘dasdview_view_standard’ at dasdview.c:1952:4,
inlined from ‘dasdview_view’ at dasdview.c:2165:3,
inlined from ‘main’ at dasdview.c:2364:3:
dasdview.c:1791:25: warning: ‘strncpy’ output may be truncated copying 16 bytes from a string of length 1023 [-Wstringop-truncation]
1791 | strncpy(asc, (char *)dumpstr + i, 16);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
dasdview.c:1792:25: warning: ‘strncpy’ output may be truncated copying 16 bytes from a string of length 1023 [-Wstringop-truncation]
1792 | strncpy(ebc, (char *)dumpstr + i, 16);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In function ‘dasdview_print_format2’,
inlined from ‘dasdview_view_standard’ at dasdview.c:1935:4,
inlined from ‘dasdview_view’ at dasdview.c:2165:3,
inlined from ‘main’ at dasdview.c:2364:3:
dasdview.c:1825:25: warning: ‘strncpy’ output may be truncated copying 8 bytes from a string of length 1023 [-Wstringop-truncation]
1825 | strncpy(asc, (char *)dumpstr + i, 8);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
dasdview.c:1826:25: warning: ‘strncpy’ output may be truncated copying 8 bytes from a string of length 1023 [-Wstringop-truncation]
1826 | strncpy(ebc, (char *)dumpstr + i, 8);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
GitHub-ID: https://github.com/ibm-s390-linux/s390-tools/pull/137
Signed-off-by: Dan Horák <dan@danny.cz>
[hoeppner@linux.ibm.com: sort include]
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The build produces a number of warnings like the ones below. The
unaligned pointers are expected, thus silence the warnings by disabling
the compiler diagnostics.
ziomon_dacc.c: In function ‘read_message’:
ziomon_dacc.c:189:44: warning: taking address of packed member of ‘struct message’ may result in an unaligned pointer value [-Waddress-of-packed-member]
189 | if ( (rc = read_message_header(fp, &msg->length, &msg->type)) )
| ^~~~~~~~~~~~
or
In file included from ziomon_mgr.c:36:
blkiomon.h: In function ‘blkiomon_stat_init’:
blkiomon.h:70:21: warning: taking address of packed member of ‘struct blkiomon_stat’ may result in an unaligned pointer value [-Waddress-of-packed-member]
70 | minmax_init(&bstat->size_r);
| ^~~~~~~~~~~~~~
GitHub-ID: https://github.com/ibm-s390-linux/s390-tools/pull/137
Signed-off-by: Dan Horák <dan@danny.cz>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The kernel already provides the same macro as does the zt_common.h file,
thus check for its availability first.
CC zconf/qeth/lsqeth.o
In file included from ../../include/lib/util_base.h:17,
from lsqeth.c:30:
../../include/lib/zt_common.h:27: warning: "_AC" redefined
27 | #define _AC(X, TYPE) X##TYPE
|
In file included from /usr/include/linux/ethtool.h:17,
from lsqeth.c:12:
/usr/include/linux/const.h:21: note: this is the location of the previous definition
21 | #define _AC(X,Y) __AC(X,Y)
|
GitHub-ID: https://github.com/ibm-s390-linux/s390-tools/pull/137
Signed-off-by: Dan Horák <dan@danny.cz>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This instruction is not present on older machines, therefore
use ltr.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Fixes: 1627c6a39f ("zipl: Support command lines longer than 896 bytes in bootloader")
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The new version of lspci does support an extended verbose mode "-vvv"
Using the the tripple v parameter does also work for the old version
having the same result as the double v called before.
Reported-by: Eberhard Pasch <epasch@de.ibm.com>
Reviewed-by: Mario Held <mario.held@de.ibm.com>
Signed-off-by: Joern Siglen <siglen@de.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
https://www.kernel.org/doc/html/latest/trace/ftrace.html?highlight=free_buffer
free_buffer:
If a process is performing tracing, and the ring buffer should be
shrunk "freed" when the process is finished, even if it were to be
killed by a signal, this file can be used for that purpose. On close
of this file, the ring buffer will be resized to its minimum size.
Having a process that is tracing also open this file, when the process
exits its file descriptor for this file will be closed, and in doing so,
the ring buffer will be "freed".
It may also stop tracing if disable_on_free option is set.
$ cat /sys/kernel/debug/tracing/buffer_size_kb
7 (expanded: 1408)
$ cat /sys/kernel/debug/tracing/free_buffer
cat: /sys/kernel/debug/tracing/free_buffer: Invalid argument
$ cat /sys/kernel/debug/tracing/buffer_size_kb
0
Reported-by: Thomas Lambart <Thomas.Lambart2@ibm.com>
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The current implementation drops the reason why a download of a CRL
failed. This is changed to the reporting of the error triggered by the
last CRL download attempt.
This mainly helps to check for the download error during CI testing
and prevent connectivity issues to be the reason of a test failure.
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Use PMU named pai_ext to extract the PMU type number required
for the installation of PAI NNPA counters using perf_event_open()
system call.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add a check to detect Processor Activity Instrumentation (PAI)
Extension 1 facility unit.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
When the summary flag is selected do not print detailed information
on every single event. Just print the summary information on each
non-zero counter value.
Suggested-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
During recording, progress information is displayed on the screen
on how many event have been processed and at which offset these
events have been extracted from the ring buffer.
This information is usually of no interest to the user. Omit this
data and only print them when requested via verbose flag.
Suggested-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add virtual counters pai_user and pai_kernel to detail all Processor Activity
Instrumentation (PAI) counters in user resp. kernel space. Once activated,
they will show all counters for the corresponding set. Add option -n to limit
the display to only non-zero counter values.
Add support for cpu hotplug events based on libudev. CPU hotplug events are
used to either detach from a vanishing CPU or (re-)attach to a (re-)appearing
CPU. In that case, a "hotplug detected" virtual counter is set to a non-zero
value to indicate possible loss of counters which happens when CPACF is used
on the CPU before cpacfstatsd could attach to it. The hotplug indication is
cleared once all counters are deactivated.
Add support for JSON output. The JSON document is an array of JSON objects
representing the counters and their values. Every object has a name (property
"counter") and a value (property "value"). For PAI counters, the counters
also have a space (property "space") determining the counter set pai_user or
pai_kernel, and a numeric id (property "counterid") that can be used to filter
the JSON document.
Signed-off-by: Juergen Christ <jchrist@linux.ibm.com>
Reviewed-By: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
cpacfstatsd now correctly handles offline cpus and dynamically attaches to
cpus once they get online. If events are enabled when a hotplug event
occurs, cpacfstatsd uses a pseudo-counter to notify user applications about
the occurence of this event and a potential data inaccuracy.
cpacfstats shows if a hotplug event has been detected since at least one
counter was activated. As soon as all counters are deactivated, the
hotplug detection state is reset.
Signed-off-by: Juergen Christ <jchrist@linux.ibm.com>
Reviewed-By: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The cpacfstats daemon is susceptible to dos attacks from malicious clients
that connect but either do not send a query or receive an answer fast
enough. The latter currently is impossible but might occur once we
introduce further counters.
Solve both problems by exploiting a timed read/write operation in the
daemon and close the connection on timeout.
Signed-off-by: Juergen Christ <jchrist@linux.ibm.com>
Reviewed-By: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Remove `-rdynamic` since it's a linker flag. This should not cause any problems
because we differentiate between compilation and linking by default. While at
it, adapt the `print_backtrace` documentation accordingly.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Acked-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Use util_file_read_va() function to read out the event number
given the event file. Also use util_strdup() function to save
the event name. This function terminates on Out Of Memory condition.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
cryptsetup 2.1.0 requires excessive amount of RAM (1GB) to luksOpen encrypted
drives (LP: #1820049).
LUKS2 introduced support for Argon2i and Argon2id as a Password-Based Key
Derivation Function (PBKDF).
Argon2 is the winner of Password Hashing Competition and is now officially
recommended by RFC 9106.
PBKDF2 is currently used in zkey to mitigate out-of-memory errors when
multiple LUKS2 volumes are opened automatically via /etc/crypttab.
This patch is to use Argon2i (the deflaut algorithm) as key derivation function
for LUKS2 volumes, but with options for low memory and time requirements.
Using the default Argon2i options might still cause out-of-memory errors.
Link: https://bugs.launchpad.net/ubuntu/+source/cryptsetup/+bug/1820049
Closes: https://github.com/ibm-s390-linux/s390-tools/pull/138
Signed-off-by: Frank Heimes <frank.heimes@canonical.com>
Acked-by: Ingo Franzki ifranzki@linux.ibm.com
[hoeppner@linux.ibm.com: fix whitespace, line break, and commit message]
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
\fBdasdfmt\fR formats a DASD (ECKD) disk drive to prepare it
for usage with Linux for S/390.
for usage with Linux for S/390.
The \fIdevice\fR is the node of the device (e.g. '/dev/dasda').
Any device node created by udev for kernel 2.6 can be used
Any device node created by udev for kernel 2.6 can be used
(e.g. '/dev/dasd/0.0.b100/disc').
.br
\fBWARNING\fR: Careless usage of \fBdasdfmt\fR can result in
\fBWARNING\fR: Careless usage of \fBdasdfmt\fR can result in
\fBLOSS OF DATA\fR.
.SHOPTIONS
.TP
\fB-h\fR or \fB--help\fR
\fB\-h\fR or \fB\-\-help\fR
Print usage and exit.
.TP
\fB-t\fR or \fB--test\fR
Disables any modification of the disk drive.
\fB\-t\fR or \fB\-\-test\fR
Disables any modification of the disk drive.
.br
\fBdasdfmt\fR just prints
out, what it \fBwould\fR do.
.TP
\fB-v\fR
\fB\-v\fR
Increases verbosity.
.TP
\fB-y\fR
\fB\-y\fR
Start formatting without further user-confirmation.
.TP
\fB--norecordzero\fR
\fB\-\-norecordzero\fR
Remove permission for subsystem to format write record zero.
.br
This is an expert option: Per default in recent dasd drivers, subsystems are
@@ -54,96 +54,101 @@ to remove this permission.
.br
.TP
\fB-L\fR or \fB--no_label\fR
\fB\-L\fR or \fB\-\-no_label\fR
Omit the writing of a disk label after formatting.
.br
This makes only sense for the 'ldl' disk layout.
.br
The '-L' option has to be specified after the '-d ldl' option.
The '\-L' option has to be specified after the '\-d ldl' option.
.br
e.g. dasdfmt -d ldl -L /dev/...
e.g. dasdfmt \-d ldl \-L /dev/...
.TP
\fB-V\fR or \fB--version\fR
\fB\-V\fR or \fB\-\-version\fR
Print version number and exit.
.TP
\fB-F\fR or \fB--force\fR
\fB\-F\fR or \fB\-\-force\fR
Formats the device without performing sanity checking.
.TP
\fB-C\fR or \fB--check_host_count\fR
\fB\-C\fR or \fB\-\-check_host_count\fR
Force dasdfmt to check the host access open count to ensure the device
is not online on another operating system instance
.TP
\fB-d\fR\fIlayout\fR or \fB--disk_layout\fR=\fIlayout\fR
\fB\-d\fR\fIlayout\fR or \fB\-\-disk_layout\fR=\fIlayout\fR
Formats the device with compatible disk layout or linux disk layout.
\fIlayout\fR is either \fIcdl\fR for the compatible disk layout
(default) or \fIldl\fR for the linux disk layout.
.br
Compatible disk layout means a special handling of the
first two tracks of the volume. This enables other S/390 or zSeries
Compatible disk layout means a special handling of the
first two tracks of the volume. This enables other S/390 or zSeries
operating systems to access this device (e.g. for backup purposes).
.TP
\fB-p\fR or \fB--progressbar\fR
Print a progress bar while formatting.
Print a progress bar while formatting.
Do not use this option if you are using a 3270 console,
running in background or redirecting the output to a file.
.TP
\fB-P\fR or \fB--percentage\fR
\fB\-P\fR or \fB\-\-percentage\fR
Print one line for each formatted cylinder showing the number of the
cylinder and percentage of formatting process.
Intended to be used by higher level interfaces.
.TP
\fB-m\fR\fIstep\fR or \fB--hashmarks\fR=\fIstep\fR
\fB\-m\fR\fIstep\fR or \fB\-\-hashmarks\fR=\fIstep\fR
Print a hashmark every \fIstep\fR cylinders. The value \fIstep\fR has to be within range [1,1000], otherwise it will be set to the default, which is 10.
.br
You can use this option to see the progress of formatting in case you
are not able to use the progress bar option -p, e.g. with a 3270
are not able to use the progress bar option \-p, e.g. with a 3270
terminal.
.br
The value will be at least as big as the -r or --requestsize value.
The value will be at least as big as the \-r or \-\-requestsize value.
.br
.TP
\fB-M\fR\fImode\fR or \fB--mode\fR=\fImode\fR
\fB\-M\fR\fImode\fR or \fB\-\-mode\fR=\fImode\fR
Specify the \fImode\fR to be used to format the device. Valid modes are:
.RS
.IPfull
Format the entire disk with the specified blocksize. (default)
.IPquick
Format the first two tracks and write label and partition information. Only use
this option if you are sure that the target DASD already contains a regular
format with the specified blocksize. A blocksize can optionally be specified
using \fB-b\fR (\fB--blocksize\fR).
Format the first two tracks and write label and partition information.
.br
For thin-provisioned DASD ESE volumes this is the default mode.
Use this option for DASD ESE volumes to take the benefits of thin provisioning.
In this case, a full space release precedes the formatting step. If this space
release fails, then the formatting also fails. Specify the \fB\-\-no\-discard\fR
option to omit the space release.
.br
For non-ESE volumes use this option only if you are sure that the target DASD
already contains a regular format with the specified blocksize. A blocksize can
optionally be specified using \fB\-b\fR (\fB\-\-blocksize\fR).
.IPexpand
Format all unformatted tracks at the end of the target DASD. This mode assumes
that tracks at the beginning of the DASD volume have already been correctly
formatted, while a consecutive set of tracks at the end are unformatted. You can
use this mode to make added space available for Linux use after dynamically
increasing the size of a DASD volume. A blocksize can optionally be specified
using \fB-b\fR (\fB--blocksize\fR).
using \fB\-b\fR (\fB\-\-blocksize\fR).
.RE
.TP
\fB--check\fR
\fB\-\-check\fR
Perform a complete format check on a DASD volume. A blocksize can be specified
with \fB-b\fR (\fB--blocksize\fR).
with \fB\-b\fR (\fB\-\-blocksize\fR).
.TP
\fB--no-discard\fR
\fB\-\-no\-discard\fR
Omit a full space release when formatting a thin-provisioned DASD ESE volume.
.TP
\fB-r\fR\fIcylindercount\fR or \fB--requestsize\fR=\fIcylindercount\fR
\fB\-r\fR\fIcylindercount\fR or \fB\-\-requestsize\fR=\fIcylindercount\fR
Number of cylinders to be processed in one formatting step.
The value must be an integer in the range 1 - 255.
.br
@@ -153,48 +158,47 @@ devices, counting the base device and all alias devices.
.br
.TP
\fB-b\fR\fIblksize\fR or \fB--blocksize\fR=\fIblksize\fR
\fB\-b\fR\fIblksize\fR or \fB\-\-blocksize\fR=\fIblksize\fR
Specify blocksize to be used. \fIblksize\fR must be a positive integer
and always be a power of two. The recommended blocksize is 4096 bytes.
.TP
\fB-l\fR\fIvolser\fR or \fB--label\fR=\fIvolser\fR
Specify the volume serial number or volume identifier to be written
to disk after formatting. If no label is specified, a sensible default
is used. \fIvolser\fR is interpreted as ASCII string and is automatically
\fB\-l\fR\fIvolser\fR or \fB\-\-label\fR=\fIvolser\fR
Specify the volume serial number or volume identifier to be written
to disk after formatting. If no label is specified, a sensible default
is used. \fIvolser\fR is interpreted as ASCII string and is automatically
converted to uppercase and then to EBCDIC.
.br
e.g. -l LNX001 or --label=DASD01
e.g. \-l LNX001 or \-\-label=DASD01
.br
The \fIvolser\fR identifies by serial number the volume. A volume serial
The \fIvolser\fR identifies by serial number the volume. A volume serial
number is 1 through 6 alphanumeric or one of the following special
characters: $, #, @, %. Enclose a serial number that contains special
characters in apostrophes. If the number is shorter than six
characters: $, #, @, %. Enclose a serial number that contains special
characters in apostrophes. If the number is shorter than six
characters, it is padded with trailing blanks.
.br
.br
Do notcodea volume serial number as SCRTCH, PRIVAT, orLnnnnn(L with
five numbers); these areusedin OS/390 messages toaskthe operator to
mount avolume.Donotcodea volume serial number as MIGRAT, which is
used bythe OS/390 Hierarchical Storage Manager DFSMShsm for migrated
Do not code a volumeserialnumber as SCRTCH,PRIVAT, or Lnnnnn (L with
fivenumbers);these are used in OS/390messages to ask the operator to
mount a volume. Do not code a volumeserialnumber as MIGRAT,which is
used by the OS/390HierarchicalStorageManagerDFSMShsm for migrated
data sets.
.br
NOTE: Try to avoid using special characters in the volume serial. This may cause problems accessing a disk by volser.
NOTE: Try to avoid using special characters in the volume serial. This may cause problems accessing a disk by volser.
.br
In case you really have to use special characters, make sure you are using quotes. In addition there is a special handling for the '$' sign. Please specify it using '\\$' if necessary.
.br
e.g. -l 'a@b\\$c#' to get A@B$C#
e.g. \-l 'a@b\\$c#' to get A@B$C#
.br
.TP
\fB-k\fR or \fB--keep_volser\fR
Keeps the Volume Serial Number, when writing the Volume Label. This is
useful, if the Serial Number has been written with a VM Tool and should not
be overwritten.
\fB\-k\fR or \fB\-\-keep_volser\fR
Keeps the Volume Serial Number when writing the Volume Label. This is useful if
the volume already has a Serial Number that should not be overwritten.
_("The '--x-scf' option cannot be used with the '--(enable|disable)-extension-secret-required' flags.\nUse 'genprotimg --help' for more information"));
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
