Newer rust std libary code checks if a fd is already closes and panics.
Test code created a file with fd=17 and relied that test code never
touched the file. This cannot be done anymore. Just use the working dir
as backing file.
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
`sizeof` was added into the prelude in rustc 1.80.
This triggers a lint-warning for `unused_qualifications` if rustc 1.80+
is used. Fix this warning by using a use statement to stay compatible
for <1.80.
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The RCs 30, 31, 32 may be caused by a malicious host or host bug.
Make this clear and advise to stop the SE-guest.
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
When checking CDL formatted DASD for installed dump-tool (zgetdump -d),
we might stumble upon an 'empty' boot record pointer in the volume label
filled with bytes of 0x40 (EBCDIC spaces). This leads to the following
seek error reported:
# zgetdump -d /dev/dasdb
zgetdump: Could not seek "/dev/dasdb" (Invalid argument)
Check for empty boot record and return proper error code by
ngdump_get_eckd_part_num() in order to end up with a regular
"No dump tool found" message.
Fixes: f3bcd94524 ("zdump: Add zgetdump -d support for ECKD ldipl-dump")
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This fixes a segfault when the option '--dry-run' is specified for
device-based dumps (for which the bootmap file is created on a RAW
device, not formatted with a file system).
The actual status is that the option '--dry-run' for device-based
dumps is not implemented. The implementation is evaluated as not
trivial: In contrast with filesystem-based dumps, it is not possible
to simply make do with rename/unlink of temporary created bootmap.
The fixup returns error on any not file system based dumps being
created with the option '--dry-run'.
Signed-off-by: Eduard Shishkin <edward6@linux.ibm.com>
Reviewed-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Drop a pair of duplicated assignmets
Replace the parameter 'struct job_data' with 'struct job_dump_data'
Signed-off-by: Eduard Shishkin <edward6@linux.ibm.com>
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Move all checks from check_dump_device_late() to disk_is_approproate()
and drop check_dump_device_late() entirely
Signed-off-by: Eduard Shishkin <edward6@linux.ibm.com>
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
In the function check_dump_device_late() drop the case of
(info->device != target_info->device) which never happens. Indeed,
the @info created in check_dump_device_late() coincides with the
@target_info previously created by
prepare_build_program_table_{file, device}.
Signed-off-by: Eduard Shishkin <edward6@linux.ibm.com>
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Since the following kernel commit:
"32db401965f1 s390/mm: Pin identity mapping base to zero"
we can have zero identity_base value in os_info. This makes zgetdump
check for non-VR kernel in vm_info_get() incorrect what leads to missing
data (e.g. UTS kernel version) in 'zgetdump -i' output.
Check for zero kaslr_offset value instead (like crash and makedumpfile
do) in order to identify non-VR kernel.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Since memory chunks can overlap for vr-kernel dumps stored in elf
format (ngdump, zfcpdump), we need to consider this when converting to
s390 dump output format. For that sort DFI memory chunks by start
address and adjust dfo_s390 logic for identifying memory gaps.
Otherwise we might end up with bogus DFO memory chunks being created.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
On vertical polarization, kernel can be adjusting CPU capacities
dynamically, and cpuplugd can interfere this with hotplug operations
causing performance degradation. To prevent this, check if system has
switched its polarization state, and act accordingly.
If system is on vertical polarization when daemon starts, no CPU hotplug
action is triggered. If system changes to vertical polarization during
daemon runtime, revert cpuhotplug adjustments and stop further CPU
hotplug actions. If system switches back to horizontal polarization
during runtime of the daemon, start evaluating CPU hotplug rules and
trigger adjustments.
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Simplify the cpu management parts of cpuplugd code by introducing
functions from libutil and rework some logic to drop some assumptions
about how kernel assigns cpuids.
Right now cpuplugd assumes that the cpuids are always sequential and
there are no gaps in between, however kernel does not guarantee that.
Make cpuplugd compliant by traversing cpu sysfs entries instead.
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This fixes c0f02d2f6 which results in problems when preparing qcow2
images for IPL:
zipl -V --blsdir /tmp/tmp.kdPooQjoBh/boot//loader/entries/ --config /
Program terminated with signal SIGFPE, Arithmetic exception.
Don't use pointer to not initialized struct disk_info after failed
auto-detection of disk parameters. Make the check that the file
locates on the disk in the form of a separate procedure.
Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Eduard Shishkin <edward6@linux.ibm.com>
Acked-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Tested-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
When detecting disk type, the function disk_get_info() is called.
It can fail for various reasons (e.g. when the logial target is not
eligible for boot record installation).
Once disk_get_info() fails, don't proceed with type detection.
Return error instead. When applicable, mark the dump job with
"is_ngdump" flag to avoid extra type detection calls.
Acked-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Signed-off-by: Eduard Shishkin <edward6@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This fixes d6b702d57 which introduces a problem: SCSI dump
installation fails:
zipl -V -d /dev/mapper/mpathd1
Error: Invalid dump device: Could not read partition table
The reasons:
1) Wrong (logical) device is passed as a target base;
2) In case of 'source_script' the check to make sure that specified
target is over a partition isn't applicable any more after zipl
support of complex logical targets (e.g. mirrors).
The fixup passes the physical device as a target base (instead of
the logical one). Also the fixup removes invalid check from
check_dump_device_late() and instead adds a more generic check to
the helper script that data starts beyong the boot area.
Reported-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Eduard Shishkin <edward6@linux.ibm.com>
Tested-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This option is experimental, but can still be useful.
While at it, sort the options alphabetically.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This fixes 670bf3e8 which actually isn't an equivalent refactoring.
The generic dm-device resolution procedure was modified to not resolve
the topmost dm-device in the path. So that any calles who don't expect
it, should complete the resolutioin process by themselves. In case of
chreipl_helper such completion was missed. chreipl(8) utility doesn't
expect dm-devices at the output of chreipl_helper.device-mapper
Example:
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 20G 0 disk
|-sda1 8:1 0 20G 0 part
`-mpathb 253:0 0 20G 0 mpath
`-mpathb1 253:2 0 20G 0 part /
sdb 8:16 0 20G 0 disk
|-sdb1 8:17 0 20G 0 part
`-mpathb 253:0 0 20G 0 mpath
`-mpathb1 253:2 0 20G 0 part /
Expected result:
8:16
Actual result:
253:0
As a result, the chreipl(8) "node" option stopped working.
The fixup adds the completion.
Reported-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Eduard Shishkin <edward6@linux.ibm.com>
Tested-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The .note.package [1] section is not used by the zipl/genprotimg bootloaders,
therefore discard them via linker script.
This fix solves the error:
/usr/bin/ld: Heap section doesn't conform to the described memory layout
collect2: error: ld returned 1 exit status
make[4]: *** [Makefile:77: stage3a.elf] Error 1
make[4]: Leaving directory '/<>/genprotimg/boot'
make[3]: *** [Makefile:20: all-recursive] Error 1
make[3]: Leaving directory '/<>/genprotimg'
make[2]: *** [Makefile:56: genprotimg] Error 2
[1] https://systemd.io/ELF_PACKAGE_METADATA/
Fixes: https://github.com/ibm-s390-linux/s390-tools/issues/174
Closes: https://github.com/ibm-s390-linux/s390-tools/pull/176
[seiden@linux.ibm.com: Add/edit fixes tags]
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Frank Heimes <frank.heimes@canonical.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Introduce target operations (struct target_ops);
For each supported device-mapper target implement
. check_target_status()
. get_target_data()
Add support for new 'raid' device-mapper target, which is now default
in LVM.
Signed-off-by: Eduard Shishkin <edward6@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Add a script to process mirrored zipl targets managed by Linux "md"
driver (AKA "software mirrors")
. In the file zipl_helper.device-mapper.c implement two handlers
identified by pairs (ZIPL_UTIL_ID, MD_DRIVER_ID) and
(CHREIPL_UTIL_ID, MD_DRIVER_ID) for the helpers zipl_helper.md
and chreipl_helper.md respectively
. zipl_helper.md: prints sets of target parameters (one such set
per mirror) for a specified logical zipl target managed by linux
"md" driver.
. chreipl_helper.md: for a specified logical zipl target managed
by linux "md" driver prints a random disk from the set of disks
participating in the mirrored setup.
. Add zipl_helper.md and chreipl_helper.md as symbolic links to
zipl_helper.device-mapper
Signed-off-by: Eduard Shishkin <edward6@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
For "mirror" device-mapper targets:
. Check status of all the mirrors;
. Return error if some mirror contain failures;
. Align the sample output properly
Signed-off-by: Eduard Shishkin <edward6@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
For "mirror" device-mapper targets:
. Don't assign a logical mirrored device as a zipl target base.
Instead, add one more branch in complete_physical_device() and
proceed (in that new branch) to the physical disk participating
in the mirrored target. This approach allowes to handle
heterogeneous mirrors properly;
. Provide a set of target parameters for each found physical disk
by calling dm_dev_to_zipl_params() recursively;
. Don't allow "nested mirrors" by checking/updating the
fail_on_mirror global;
. Remove the requirements on including block #0 to the mirrored
device-mapper setup (no more actual);
. Update comments.
Signed-off-by: Eduard Shishkin <edward6@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
This is used by the next patches in the series to support mirror
setups not including boot sectors (e.g. mirrors over partitions).
. Rework the core procedure of device resolution (by walking along
the device-mapper tree during logical device resolution) to be an
explicit sequence of pairs (level-lookup, goto-parent-level);
. Add an "extended" device to keep a track of file system offset
while ascending the device tree;
. Identify all possible results of a single level lookup;
. Rename target_entry to dmpath_entry;
. Make the main() function to look like a call of a handler
identified by a pair (driver-id, util-id) and found by the name
of the executable.
Signed-off-by: Eduard Shishkin <edward6@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Fix mistake in @fs_offset calculation.
Since any logical dm-device can be built of partitions, @fs_offset
must not decrease while ascending the "device tree" during the
procedure of dm-device resolution (which always starts at the
formatted logical device, for which @fs_offset is 0).
This bug was not reproducible earlier because of restricted
functionality in a combination with side-effects. The fixup is
required however by the next patches in the series implementing
support of mirrored targets by zipl tool
Signed-off-by: Eduard Shishkin <edward6@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
. Modify disk_get_info() to process multiple sets of target parameters
provided by the helper script and store it in the array of "targets"
of the structure job_target_data;
. Besides the logical device, maintain an array of physical base disks
in the disk_info structure;
. Use the logical target device only to create bootmap (it is
automatically mirrored by the respective linux driver (dm, or md)
managing the mirrored target). In contrast, install bootstrap blocks
to each physical base disk individually, bypassing that driver;
. Report in verbose mode on which base disks the bootstrap
installation was performed;
. Use the following logic of setting @info->device (which is printed
as "Device...:" in verbose mode):
. source_auto - the target base disk is set;
. source_script - the target (logical) device is set;
. source_user - the device specified by user (via --targetbase
option), or config file is set.
Signed-off-by: Eduard Shishkin <edward6@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Add new command-line option --ipldev. When specified and IPL was done
from a supported device type, the IPL device is selected for the
requested tool operation.
Example to list IPL device information:
$ lszdev --ipldev
Example to create a persistent configuration for the IPL device:
$ chzdev --enable --persistent --ipldev
Reviewed-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reduce code complexity by adding a utility function for reading text
files based on a variable path.
Note: chzdev/lszdev tools apply special path-handling via command line
option --base to allow redirecting hard-coded paths therefore libutil's
util_file functions cannot easily be used.
Reviewed-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Steps to reproduce: Prepare some disk for IPL, specifying its
parameters via zipl "target options", and an image IMAGE_NAME
located on another disk. Don't specify "-a" option.
Actual result: Installation succeeded (resulting in unbootable setup)
Expected result: "Error: Could not add image file 'IMAGE_NAME': File
is not on target device"
The problem is in incorrect evaluation of device number (dev_t)
of the base disk where the image is located by the function
add_component_file_range() in case when target parameters are
specified by user.
Fixup: Retrieve info of the underlying disk without any user hints,
passing zeroed structure job_target_data
This is an improved version of fb0b6263d that was reverted by
63ff07ba3 afterwards. The shortcoming of the original ( fb0b6263d )
fix: it fails to prepare for IPL mounted qcow2 images.
The difference from the original fix: when making sure that boot
files are located on the target disk: in case of failed auto-detection
of disk parameters skip the check with warnings instead of aborting
the whole installation session.
Acked-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Eduard Shishkin <edward6@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
MSA 10 and MSA 11 introduce new function codes containing Full XTS
functions for KM instruction and HMAC functions for KMAC instruction.
Additional Full XTS and HMAC for PCKMO instruction is introduced.
Signed-off-by: Finn Callies <fcallies@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Perl logs warning message if a variable is not initialized.
get_device_data() set mp_dev with multipath device for a scsi disk device.
mp_dev remain uninitialized if there is no multipath device.
This can happen if a scsi device is not managed by dm multipath driver.
Warning message:
"Use of uninitialized value in subroutine entry at /usr/sbin/ziorep_config line 136"
Fix it by skipping the code dealing with mp_dev and continue with next
scsi device in the loop.
To reproduce, remove a scsi device from dm multipath.
$multipathd -k'del path sdh'
Then run `ziorep_config -D`.
Signed-off-by: Nihar Panda <niharp@linux.ibm.com>
Reviewed-by: Fedor Loshakov <loshakov@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
We changed lscss for more detailed output.
Adding use of dasdview for a detailed view on DASD storage.
This data will be collected in a separate file, as many DASDs might flood
the runtime.out
Also updated man pages as a new step is added
Reviewed-by: Stefan Hberland <sth@linux.ibm.com>
Signed-off-by: Joern Siglen <siglen@de.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The ap.rs code is already prepared for possible support
for CCA mode APQNs for the Secure Execution environment.
However, this patch marks these fields and structs with
pragma allow(dead_code) to prevent warnings during cargo
build of pvapconfig.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add a new action type 'capabilities' for the 'get' event. This
will return a JSON list of events and actions that the callout
script recognizes and actually does something with. It omits
events like 'notify' and actions like 'list' that ap-check
currently ignores.
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
mdevctl introduces a new event type 'live' with action 'modify',
indicating that the specified configuration changes should be
made dynamically if possible. Use this as a trigger to perform
dynamic configuration changes to the specified vfio-ap device
if it is active.
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Anthony Krowiak <akrowiak@linux.ibm.com>
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
While unlikely, it is possible for a vfio-ap configuration JSON
to include the 'ap_config' attribute. In this case, process it
by overwriting the current list of adapters, domains and control
domains for the associated vfio-ap device struct.
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Anthony Krowiak <akrowiak@linux.ibm.com>
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
For a given vfio-ap mdev, determine whether or not the device will
need dynamic config operations. This boils down to whether or not
the device is currently active + whether or not the kernel is
detected to support dynamic config operations (via the
'ap_config' sysfs attribute).
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Anthony Krowiak <akrowiak@linux.ibm.com>
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The qeth-udev-rule execution logs a warning as below in the journalfs.
Failed to write ATTR{/sys/bus/ccwgroup/drivers/qeth/group}, \
ignoring: Invalid argument
This occurs because the udev rule for qeth devices is triggered by
multiple ccw devices and can be invoked in parallel. This can lead to a
situation where each of the three parallel-running udev rules tries to
group the devices simultaneously. As a result, only the first rule
succeeds, while the others fail with an -EINVAL error because the CCW
devices have already been grouped.
To prevent this, schedule a new change uevent for the base device, which
will verify the sysfs before attempting the grouping. The change event is
triggered by all three devices, ensuring that the actual write to the
attribute occurs only once and only when the sysfs attribute is ready.
Hence the add events on different devices are serialized to change event
on the base device, which then prevent duplicate concurrent grouping
attempts.
Suggested-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The function copy_table_entry_write() maps/unmaps /proc/vmcore for each
64kB of the file in order to write its content to a dump partition.
This requires a page allocation of order 2 in kernel (crst_table_alloc)
each time a mmap() syscall is performed and which cannot always be
fulfilled due to external memory fragmentation. And this in turn
results in a OOM kernel panic while writing /proc/vmcore content to
a dump partition. To make zfcpdump more robust in the face of such
problems with page allocations of order > 0, we use a simple file
read/write loop to transfer the content of /proc/vmcore to a dump
partition. This solution is less efficient (by not much) than the old
one with mmap() because it requires additional user space copy but
we trade off here efficiency for robustness which is more important
for zfcpdump.
We use a statically allocated buffer to read data into from /proc/vmcore
and write to a dump partition to avoid repeated use of the memory
mapping kernel path which would be required for a buffer allocated
dynamically at each entry of copy_table_entry_write().
Another possible and very convenient solution would be to use sendfile()
which would avoid any user space copies but, unfortunately, sendfile()
doesn't work with large /proc files.
Example of failed mmap() call for /proc/vmcore
==============================================
[ 26.568654] init invoked oom-killer: gfp_mask=0x40cc0(GFP_KERNEL|__GFP_COMP), order=2, oom_score_adj=0
[ 26.568665] CPU: 0 PID: 1 Comm: init Not tainted 6.9.0-20240504.rc6.git0.9986ea583f39.300.fc39.s390x+zfcpdump #1
[ 26.568668] Hardware name: IBM 3931 A01 704 (LPAR)
[ 26.568669] Call Trace:
[ 26.568671] [<000003ffe03277c6>] dump_stack_lvl+0x76/0x98
[ 26.568676] [<000003ffe00f15c8>] dump_header+0x58/0x2d0
[ 26.568680] [<000003ffe00f219a>] out_of_memory+0x252/0x348
[ 26.568683] [<000003ffe0132f3e>] __alloc_pages_slowpath.constprop.0+0x65e/0x7c0
[ 26.568686] [<000003ffe01331a4>] __alloc_pages+0x104/0x128
[ 26.568688] [<000003ffe001ab46>] crst_table_alloc+0x2e/0xa0
[ 26.568693] [<000003ffe01164c4>] __pmd_alloc+0x24/0x160
[ 26.568696] [<000003ffe0116650>] pmd_alloc+0x50/0x68
[ 26.568698] [<000003ffe0117be4>] remap_pfn_range_notrack+0x194/0x310
[ 26.568701] [<000003ffe0117d7c>] remap_pfn_range+0x1c/0x28
[ 26.568703] [<000003ffe0015442>] remap_oldmem_pfn_range+0xb2/0x108
[ 26.568705] [<000003ffe01a0544>] mmap_vmcore+0x414/0x448
[ 26.568707] [<000003ffe01937c4>] proc_reg_mmap+0x84/0xa0
[ 26.568709] [<000003ffe011f264>] mmap_region+0x22c/0x6f8
[ 26.568711] [<000003ffe011fae8>] do_mmap+0x3b8/0x410
[ 26.568713] [<000003ffe01015cc>] vm_mmap_pgoff+0x9c/0xe8
[ 26.568715] [<000003ffe011d006>] ksys_mmap_pgoff+0x8e/0xb8
[ 26.568716] [<000003ffe011d0f4>] __s390x_sys_old_mmap+0x74/0x90
[ 26.568718] [<000003ffe0341a2a>] __do_syscall+0x1aa/0x220
[ 26.568720] [<000003ffe03478b0>] system_call+0x70/0x98
[ 26.568724] Mem-Info:
[ 26.568725] active_anon:1 inactive_anon:12 isolated_anon:0
active_file:83590 inactive_file:93939 isolated_file:0
unevictable:201 dirty:17845 writeback:4
slab_reclaimable:4259 slab_unreclaimable:1482
mapped:174 shmem:0 pagetables:810
sec_pagetables:0 bounce:0
kernel_misc_reclaimable:0
free:2694 free_pcp:105 free_cma:0
[ 26.568729] Node 0 active_anon:4kB inactive_anon:48kB active_file:334360kB inactive_file:375756kB unevictable:804kB isolated(anon):0kB isolated(file):0kB mapped:696kB dirty:71380kB writeback:16kB shmem:0kB writeback_tmp:0kB kernel_stack:544kB pagetables:3240kB sec_pagetables:0kB all_unreclaimable? no
[ 26.568732] DMA free:10776kB boost:0kB min:3496kB low:4368kB high:5240kB reserved_highatomic:0KB active_anon:4kB inactive_anon:48kB active_file:334360kB inactive_file:375756kB unevictable:804kB writepending:71360kB present:786428kB managed:764664kB mlocked:0kB bounce:0kB free_pcp:420kB local_pcp:420kB free_cma:0kB
[ 26.568735] lowmem_reserve[]: 0 0 0
[ 26.568738] DMA: 1069*4kB (UH) 757*8kB (UH) 11*16kB (H) 6*32kB (H) 1*64kB (H) 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 10764kB
[ 26.568747] 177773 total pagecache pages
[ 26.568748] 196607 pages RAM
[ 26.568748] 0 pages HighMem/MovableOnly
[ 26.568749] 5441 pages reserved
[ 26.568749] Tasks state (memory values in pages):
[ 26.568750] [ pid ] uid tgid total_vm rss rss_anon rss_file rss_shmem pgtables_bytes swapents oom_score_adj name
[ 26.568751] Out of memory and no killable processes...
[ 26.568752] Kernel panic - not syncing: System is deadlocked on memory
[ 26.568755] CPU: 0 PID: 1 Comm: init Not tainted 6.9.0-20240504.rc6.git0.9986ea583f39.300.fc39.s390x+zfcpdump #1
[ 26.568758] Hardware name: IBM 3931 A01 704 (LPAR)
[ 26.568759] Call Trace:
[ 26.568760] [<000003ffe03277c6>] dump_stack_lvl+0x76/0x98
[ 26.568763] [<000003ffe001f14e>] panic+0x10e/0x2e8
[ 26.568765] [<000003ffe00f21c8>] out_of_memory+0x280/0x348
[ 26.568768] [<000003ffe0132f3e>] __alloc_pages_slowpath.constprop.0+0x65e/0x7c0
[ 26.568771] [<000003ffe01331a4>] __alloc_pages+0x104/0x128
[ 26.568773] [<000003ffe001ab46>] crst_table_alloc+0x2e/0xa0
[ 26.568776] [<000003ffe01164c4>] __pmd_alloc+0x24/0x160
[ 26.568779] [<000003ffe0116650>] pmd_alloc+0x50/0x68
[ 26.568781] [<000003ffe0117be4>] remap_pfn_range_notrack+0x194/0x310
[ 26.568784] [<000003ffe0117d7c>] remap_pfn_range+0x1c/0x28
[ 26.568787] [<000003ffe0015442>] remap_oldmem_pfn_range+0xb2/0x108
[ 26.568789] [<000003ffe01a0544>] mmap_vmcore+0x414/0x448
[ 26.568791] [<000003ffe01937c4>] proc_reg_mmap+0x84/0xa0
[ 26.568793] [<000003ffe011f264>] mmap_region+0x22c/0x6f8
[ 26.568795] [<000003ffe011fae8>] do_mmap+0x3b8/0x410
[ 26.568797] [<000003ffe01015cc>] vm_mmap_pgoff+0x9c/0xe8
[ 26.568799] [<000003ffe011d006>] ksys_mmap_pgoff+0x8e/0xb8
[ 26.568801] [<000003ffe011d0f4>] __s390x_sys_old_mmap+0x74/0x90
[ 26.568803] [<000003ffe0341a2a>] __do_syscall+0x1aa/0x220
[ 26.568805] [<000003ffe03478b0>] system_call+0x70/0x98
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
For vr-kernel dumps use the offsets stored in os_info entries for
virt to phys address conversion when dump virtual address is to be
read, (e.g. vmcoreinfo symbols) using similar method as implemented
in crash-utility.
It is mainly required for reading "init_uts_ns" symbol and, in case
of crashed kdump, "lowcore_ptr" symbol along with a pointers to the
lowcore of every CPU.
Acked-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Support vmcore based dumps (ngdump, zfcpdump) with uncoupled physical and
virtual addresses. For that we just remove p_paddr != p_vaddr sanity check
for elf load headers.
Acked-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Output generated using libutil's util_fmt_*() functions contains
meta-data such as hostname and time of invocation. When writing test
cases that compare expected and actual tool output, this run-time
variable information needs to be filtered out, resulting in increased
complexity.
To address this, add a global option to suppress meta-data output via
environment variable FMT_NOMETA. If set to '1', no meta-data will be
generated.
Example:
$ FMT_NOMETA=1 chpstat --format json
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
The previous implementation did stop after the first download was
successful, even if it did not contain a CRL. This behavior renders a
second, third, ... link as backup location useless as the code ignores
them if the URI e.g. contains a error message. That results in not
having a CRL and probably a failed certificate verification.
Fix this by trying again if the download was successful but did not
contain a CRL
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
In order to allow loop devices usage for DASD dump emulation in fvt-tests,
do not bail out on ZG_TYPE_DASD device type returned by zg_type() for
s390_ext dump.
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
There are still a few scripts using the 'which' command to determine
either the full path or the mere existence of an executable.
Some of these scripts might run in minimal environments where 'which' is
not available due to dependency restriction. 'which' is also considered
unreliable for historical implementation details.
Use the POSIX defined [1] built-in 'command -v' instead to reduce
package dependencies and improve reliability.
[1] https://pubs.opengroup.org/onlinepubs/9699919799/
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
The new parameter 'SCP_DATA' can be used to pass additional kernel cmdline
parameters to a stand-alone SCSI/NVMe/ECKD dumper for debugging purposes.
Configuration example
=====================
ON_PANIC=dump_reipl
DUMP_TYPE=fcp
DEVICE=0.0.4711
WWPN=0x5005076303004711
LUN=0x4711000000000000
BOOTPROG=0
BR_LBA=0
SCP_DATA="dump_debug=6 ignore_loglevel earlyprintk=sclp panic_print=3"
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
When dump is copied to the filesystem in s390 format, follow on
'zgetdump -i' can fail with ioctl error:
# zgetdump /dev/dasdb1 -f s390 dump.s390
Format Info:
Source: s390_ext
Target: s390
Copying dump:
00000001 / 00008192 MB
00003688 / 00008192 MB
00006646 / 00008192 MB
00008192 / 00008192 MB
Success: Dump has been copied
# zgetdump -iVVVV dump.s390
zgetdump: Operation "BLKSSZGET" failed on "dump.s390" (Inappropriate ioctl for device)
Call ioctl(BLKSSZGET) only for s390_ext dump format (dump can be
stored on DASD partition only, not on the filesystem). For s390 format
a blocksize is not required for dump processing since s390 dump data is
not compressed.
Fixes: 271b809495 ("zdump/dfi_s390: Support reading compressed s390_ext dumps")
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
pvattest-C had a -a option for --arpk which the Rust implementation
missed.
Add this short option.
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
The commit fb0b6263d1 ("zipl/src: Fix problems when target parameters
are specified by user") breaks the case where the user has to provide
all target attributes via the zipl command line, because the target
device cannot be used to retrieve those attributes.
$ zipl -V --blsdir /tmp/tmp.xHmFUdgBCi/boot//loader/entries/ --config /tmp/tmp.dSv9MJ3svs
Looking for components in '/lib/s390-tools'
Using config file '/tmp/tmp.dSv9MJ3svs' (from command line)
Using BLS config file '/tmp/tmp.xHmFUdgBCi/boot//loader/entries//50_normal.conf'
Using BLS config file '/tmp/tmp.xHmFUdgBCi/boot//loader/entries//45_normal_swiotlb.conf'
Using BLS config file '/tmp/tmp.xHmFUdgBCi/boot//loader/entries//40_pv.conf'
Using BLS config file '/tmp/tmp.xHmFUdgBCi/boot//loader/entries//30_pv_reboot.conf'
Secure boot support: yes
Target device information
Device..........................: 2b:00
Device name.....................: nbd0 *)
Device driver name..............: nbd
Type............................: disk device
Disk layout.....................: SCSI disk layout *)
Geometry - start................: 2048 *)
File system block size..........: 4096
Physical block size.............: 512 *)
Device size in physical blocks..: 2095071
*) Data provided by user.
Building bootmap in '/tmp/tmp.xHmFUdgBCi/boot/'
Building menu 'zipl-automatic-menu'
Adding #1: IPL section 'Normal Guest' (default)
initial ramdisk...: /tmp/tmp.xHmFUdgBCi/boot//ramdisk-s390x
kernel image......: /tmp/tmp.xHmFUdgBCi/boot//vmlinux-s390x
zIPL environment block content:
Error: Could not add image file '/tmp/tmp.xHmFUdgBCi/boot//vmlinux-s390x': Could not get disk geometry
This reverts commit fb0b6263d1.
Acked-by: Eduard Shishkin <edward6@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Having timestamps in gzip leads to lintian warning
'package-contains-timestamped-gzip' and will harm reproducible builds.
Gzip option '-n' avoids saving original file name and especially timestamps
by default.
Fixes: https://github.com/ibm-s390-linux/s390-tools/pull/169
Signed-off-by: Frank Heimes <frank.heimes@canonical.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
[seiden@linux.ibm.com: Fix commit message]
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Do some formatting that are in experimental stage but improve the code
readability.
Use rustfmt with a nightly toolchain and enable:
format_code_in_doc_comments = true
reorder_impl_items = true
comment_width = 100
wrap_comments = true
normalize_comments = true
(see .rustfmt.toml)
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Remove all the code just pvattest-C used from libpv.
z(get)dump is the only user as of now.
Acked-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
This will reduce code dependency to otherwise unused code in libpv.
This code will be removed with the next patch.
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Add a CLI compatible Rust implementation of pvattest-C.
- All (non-experimental) options are supported and work exactly as in
the C implementation. For some options/parameters new variants are
available.
- `perform` now also accepts positional arguments, while keep accepting
-i and -o that was mandatory in the C implementation.
- `version` may also be a command instead of an option now.
- -V is deprecated
- -v increases verbosity instead of showing the version
- all experimental options are dropped
Acked-by: Qi Feng Huo <huoqif@cn.ibm.com>
Acked-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Renames pv crate to s390_pv and pv_core to s390_pv_core. pv was already
taken on crates.io.
Bump the versions of all crates to 0.10.0. From now on we follow Semver
compatibility rules when it comes to updates. patch-level updates will
not introduce any backwards incompatible changes. For now all crates in
this directory will have the same version number. A version update may,
therefore, not add any new things.
Library users in this repository still use the non prefixed names and
rename the crate in the Cargo.toml. Doc-tests have to use the new name
however.
Add some Cargo metadata to the Cargo.toml.
Acked-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Use `AsRef<Path>` instead of `&Path`, &str, .... to be more versatile
and accept more input types. In addition, use `PathBuf` and `Path` for
paths instead of `String` and `str`.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Denies compiling if one of the following lints find something in pv or
pv_core:
missing_docs,
missing_debug_implementations,
trivial_numeric_casts,
unstable_features,
unused_import_braces,
unused_qualifications
Those lint force developers to avoid unnecessary code and providing
debuggability & documentation for each public symbol.
Fix the compile time error introduced with those lints.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
crates.io does not like sub-crates in a crate. Unpack the
openssl-extensions sub-crate into a (private) module.
While at it, fix some styling issues.
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Add functionality for:
* sending attestation requests to the uvdevice and retrieve the
response
* create/read the attestation exchange format file format
Acked-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Add a function to decrypt a block with aes_gcm.
Add functionality to perform HMAC operations.
Acked-by: Qi Feng Huo <huoqif@cn.ibm.com>
Acked-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Add a thin wrapper around [u8] to be able to represent an u8-slice as a
hex-string for Display and Serialize.
Acked-by: Qi Feng Huo <huoqif@cn.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Remove !#[allow(unused)] in pv_core and fix all unused warnings from the
Rust compiler.
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Prepare pv & pv_core crates to be released on crates.io:
* Remove any unused API to stay flexible
* Remove utils dependency
* Move cli, tmpfile and version utilities to local utils crate
* Use the new utilities in the pv tools
* Rename Secret into Confidential to avoid confusion of Secret (now
Confidential) and AddSecret requests.
* Move the uvsecret module out of the request module and change the name
to secret.
* Cleanup dependencies
* Precise and correct minimal dependency versions
* Inline `Aes256Key::from_digest`
The cleanup ensures that the code also compiles with the dependencies
resolved to their minimal versions using:
$ cargo +nightly -Z minimal-versions update
$ cargo build
For more information refer to this blog post:
https://users.rust-lang.org/t/psa-please-specify-precise-dependency-versions-in-cargo-toml/71277/8
Signed-off-by: Marc Hartmayer <mhartmay@de.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Add subcommands in the man description. Add description for the help option.
Fix some minor wording issues.
Add the curve type in the --user-data option of create.
Acked-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Add a new tool named chpstat that can be used to view channel-path
statistics such as utilization and I/O throughput, and to query and
control the status of the channel-path statistics function.
Note: Channel-path statistics are only available on systems running in
an LPAR or DPM partition.
When run without further options, data for all channel-paths is
displayed repeatedly with a 5 second delay in table format.
Example output:
CHANNEL-PATH UTILIZATION(%) READ(B/s) WRITE(B/s)
ID TYP CMG SHR SPEED PART TOTAL BUS PART TOTAL PART TOTAL
1d 25 2 1 - 7.16 7.50 7.50 129M 129M 0.00 161K
21 1b 2 1 32G 0.00 0.00 0.00 0.00 0.00 0.00 0.00
34 1b 2 1 32G 0.00 0.00 0.00 0.00 0.00 0.00 0.00
61 25 2 1 - 0.00 0.01 0.00 0.00 2.00K 0.00 307K
63 25 2 1 - 0.00 0.01 0.00 0.00 0.00 0.00 381K
bd 11 2 1 10G - - - 529.8 532.1 616.3 616.3
Reviewed-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Add helper functions for converting structured key-value data into
different formats such as JSON, text pairs, and CSV.
Using these functions the resulting output format can be dynamically
configured at run-time without the need to duplicate output-generating
code for each format type. Also format-specific requirements such as
quoting, indentation, and comma-placement are automatically taken care
of.
Basic API calling sequence:
util_fmt_init() => Select output format
util_fmt_obj_start() => Start a new object or list
util_fmt_pair() => Emit a key-value pair
util_fmt_obj_end() => End the most recent object or list
util_fmt_exit() => Cleanup
Notes:
- Supported data elements are objects, lists and key-value pairs
(mappings)
- Scalars are only supported as part of a mapping
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Add function util_concatf() that appends the result of a format string
expansion to the end of an existing string while taking care of the
required memory allocations.
Usage example:
char *str = NULL;
util_concatf(&str, "list:");
for (int i = 1; i <= 3; i++)
util_concatf(&str, "%spart%d", (i > 1 ? "," : ""), i);
printf("%s\n", str); /* list:part1,part2,part3 */
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Add helper macros to easily create, enlarge and append new elements to
dynamic arrays of arbitrary types.
Note: The use of dynamic arrays over lists may be preferable in some
cases to reduce complexity, and they may be required in cases where
elements need to be addressed directly by index.
Usage example:
struct {
int a;
int b;
} *array = NULL, element = { 1, 2 };
unsigned int num = 0;
util_add_array(&array, &num, element);
printf("array[0].a=%d\n", array[0].a); /* array[0].a=1 */
printf("array[0].b=%d\n", array[0].b); /* array[0].b=2 */
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
The current implementation of util_hexdump_grp() enforces a minimum
indentation of 1 space which may not be suitable for all users.
Fix this by allowing a true zero indentation level.
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
The separator line emitted by util_rec functions may not be suitable for
all users. Fix this by making the hdr_sep parameter optional.
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
By default, files opened via fopen are block-buffered. As a result,
I/O errors that occur during file write operations via util_file_write_*
are silently ignored because fputs() only buffers data while actual I/O
occurs during the flush operation that is part of the final fclose()
library call.
Fix this by indicating errors that occur during fclose() via the
util_file_write_* function return code.
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Steps to reproduce: Prepare some target disk for IPL, specifying
its parameters via zipl "target options", and an image IMAGE_NAME
located on another disk. Don't specify "-a" option.
Actual result: Installation succeeded (resulting in unbootable setup)
Expected result: "Error: Could not add image file 'IMAGE_NAME': File
is not on target device"
The problem is in incorrect evaluation of device number(dev_t) where
the image is located by the function add_component_file_range() in
case when target parameters are specified by user.
Fixup: Retrieve info of the underlying disk without any user hints,
passing zeroed structure job_target_data
Signed-off-by: Eduard Shishkin <edward6@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
This patch fixes a bug in disk_get_info()
Steps to reproduce: Prepare a SCSI disk for IPL, specifying an image
("-i IMAGE_NAME") located on DASD and a target directory ("-t /mnt")
located on SCSI (dm). Don't specify "-a" option.
Actual result: Installation succeeded (resulting in unbootable setup!)
Expected result: "Error: Could not add image file 'IMAGE_NAME':
File is not on target device".
The problem is in incorrect evaluation of device number (dev_t) of
the device, where the image file is located, by the function
add_component_file_range(). To evaluate it, disk_get_info() is called
with the structure job_target_data (passed as the second argument)
previously completed by disk_get_info() called earlier to evaluate
parameters of the specified target device (SCSI dm) by the function
prepare_build_program_table_file(). Since the targetbase is already
set in the passed job_target_data (by the first call), in the second
call the source type is evaluated as "source_user", so the number of
the device where the image is located is calculated by the base SCSI
disk, which is incorrect.
Fixup: Rework disk_get_info(): introduce a dedicated function to
evaluate source type not depending on the job_target_data content.
Implement the core procedure as a switch by the evaluated source
type.
Signed-off-by: Eduard Shishkin <edward6@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Use "bootmap_dir" field of struct job_target_data instead,
thus avoid allocation/releasing additional resources.
Signed-off-by: Eduard Shishkin <edward6@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
This patch fixes a bug in disk_get_info()
Steps to reproduce: Prepare a DASD disk for IPL, specifying an
image ("-i IMAGE_NAME") located on SCSI (dm) and a target directory
("-t /mnt") located on DASD. Don't specify "-a" option.
Actual result: "Run /lib/s390-tools//zipl_helper.device-mapper /mnt
Error: Could not retrieve device-mapper information for device
'dasda1'"
Expected result: "Run /lib/s390-tools//zipl_helper.device-mapper 253:4
Error: Could not add image file 'IMAGE_NAME': File is not on target
device"
The problem is in incorrect calculation by disk_get_info()
parameters for @device associated with the image file. Specifically,
@target->bootmap_dir is passed to the script, which is wrong.
Fixup: Get rid of bogus branching in disk_get_info() in case when
target parameters are evaluated in "source_script" mode. Always pass
major and minor of the @device (whose parameters to be calculated)
to the helper script.
Signed-off-by: Eduard Shishkin <edward6@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Hyphens are converted by groff to a different unicode character leading
to failing command execution of copy-pasted options or examples.
Ensure that all hyphens are properly escaped.
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Hyphens are converted by groff to a different unicode character leading
to failing command execution of copy-pasted options or examples.
Ensure that all hyphens are properly escaped.
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Hyphens are converted by groff to a different unicode character leading
to failing command execution of copy-pasted options or examples.
Ensure that all hyphens are properly escaped.
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
The man page title was incorrectly set to "LSDASD". Set the correct name
"DASDSTAT".
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Hyphens are converted by groff to a different unicode character leading
to failing command execution of copy-pasted options or examples.
Ensure that all hyphens are properly escaped.
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Hyphens are converted by groff to a different unicode character leading
to failing command execution of copy-pasted options or examples.
Ensure that all hyphens are properly escaped.
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Hyphens are converted by groff to a different unicode character leading
to failing command execution of copy-pasted options or examples.
Ensure that all hyphens are properly escaped.
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Hyphens are converted by groff to a different unicode character leading
to failing command execution of copy-pasted options or examples.
Ensure that all hyphens are properly escaped. Fix whitespace damage
along the way.
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Hyphens are converted by groff to a different unicode character leading
to failing command execution of copy-pasted options or examples.
Ensure that all hyphens are properly escaped.
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Hyphens are converted by groff to a different unicode character leading
to failing command execution of copy-pasted options or examples.
Ensure that all hyphens are properly escaped.
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Under QEMU user can attach disk with smth like:
```
-device virtio-scsi-ccw,... -device scsi-hd,...
```
So virtio block device appears as '/dev/sda' instead of '/dev/vda'.
chreipl assumes all '/dev/sd*' disks as FCP disks, which is not a
case in such setup.
Closes: https://github.com/ibm-s390-linux/s390-tools/pull/154
Signed-off-by: Nikita Dubrovskii <nikita@linux.ibm.com>
Acked-by: Marc Hartmayer mhartmay@linux.ibm.com
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Add helper function to get device's real path under SYSFS_ROOT devices
hierarchy.
Github-ID: https://github.com/ibm-s390-linux/s390-tools/pull/154
Signed-off-by: Nikita Dubrovskii <nikita@linux.ibm.com>
[hoeppner@linux.ibm.com: Adapt commit message]
Acked-by: Marc Hartmayer mhartmay@linux.ibm.com
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
If many invocations of mdevctl occur simultaneously (as can happen with
libvirt) then waiting for 5-60 seconds per lock retry is simply too long.
Anticipating this possibility, retry more frequently but also attempt
significantly more retries than before.
Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Marc Hartmayer <marc@linux.ibm.com>
Tested-by: Marc Hartmayer <marc@linux.ibm.com>
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
The default values for repeated attempts at acquiring a file lock created
by util_lockfile are on the order of seconds. Let's leave this the
default, but allow for a caller to specify smaller values by adding
cw (custom_wait) functions and by switching from using sleep to usleep.
Reviewed-by: Anthony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Ensure that all hyphens in command options and examples are escaped properly.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Ensure that all hyphens in command options and examples are escaped properly.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
When formatting an ESE (thin-provisioned) ECKD DASD, dasdfmt(8)
defaults to the quick-format mode instead of full-format for normal
DASDs. This results in a significant performance impact during first
sequential write to each track, which may be unexpected for users.
To address this, change the default for dasdfmt to always use
full-format mode. Customers that require thin provisioning(*) still
override the default by specifying quick format explicitly using the
"-M" option.
Get rid of the related fallbacks; In case of unsuccessful space
release always fail. The customers that still require quick format can
proceed by specifying "--no-discard" option.
(*) Thin provisioning: while providing a large amount of logical
space, zero amount of actual space is provisioned and then
allocated on an on-demand basis.
Signed-off-by: Eduard Shishkin <edward6@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Check for vmcore LOAD segment with zero paddr (instead of zero vaddr) to
identify HSA since physical and virtual addresses can be uncoupled on s390.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Acked-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The 'lschp' command's output contains a 'type' identifier column. For
information about each value of this identifier, provide the
reference to the z/OS public documentation in the manpage.
Suggested-by: Mike Storzer <MSTORZER@de.ibm.com>
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Get rid of all arch barriers in main.rs. cmd.rs handles the arch
barriers for the individual commands. Simplifies main.rs & cmd.rs and
makes it easier to read and understand the code.
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Julian Ruess <julianr@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Fix findings from `cargo clippy --all-targets`. `warning: calls to
`push` immediately after creation` The findings were in test code only.
Also, replace a while loop with a function from Vec.
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Julian Ruess <julianr@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
They add no value and code outside the crate does not need those constants.
Reduces unnecessary constant duplication. Introduce an error for to
large Add-Secret requests and check for this to render those contsnts
fully unnecessary for the API.
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Julian Ruess <julianr@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The BinGuestSecret type provides no benefits. The public GuestSecret
struct can handle everything. Therefore, move the two functions from bin
to the non-bin variant. While at it, use a struct to define the binary
structure instead of copy numbers to some positions in a Vec. This
simplifies the addition of further secret types.
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Julian Ruess <julianr@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This streamlines and unifies the use and (de)serialization of structs
using a secret id. As a bonus, the hidden `for_pv` module is not longer
needed.
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Julian Ruess <julianr@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Provides a default for the cmd function for an UvCmd. This is enabled by
requiring an associated constant for the IOCTL nr of the command.
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Julian Ruess <julianr@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The content of `pv/src/uvsecret/uvc.rs` was moved with
9b51b8b882 ("rust/pv: Refactor pv crate") to pv_core.
The content was unused, but the file was not deleted.
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Julian Ruess <julianr@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Fix clippy waring `warning: very complex type used.` by introducing a
new struct containing the tuple, that was returned before.
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Julian Ruess <julianr@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
During the remove of mockito, lazy_static dependency was accidentally
removed as well.
Fix this by adding lazy-static as dev dependency again.
Fixes: aba8900074 ("rust/pv_core: Remove mockito dependency")
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This adds the counter numbers to the corresponding counter names to the
cpacfstats output. This aims to ease using this tool with other related
tools which may use other names for the counters.
Signed-off-by: Finn Callies <fcallies@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
All files created by chzdev feature a common header; however, this
header is absent in temporary files. It is necessary to incorporate
the consistent "Generated by chzdev" header into temporary files
generated by chzdev as well, so as to properly identify these files
via option --is-owner.
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Enhance the 'chzdev' tool by introducing a new option to discern
files created by 'zdev-tools.' The command usage is as follows:
$ chzdev --is-owner <file-name>
When executed, the command will return an exit code of 0 for all
files generated by zdev-tools. In the case of an unknown file, the
tool will return the exit code 'EXIT_UNKNOWN_FILE i.e 33.'
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add zdev-specific definitions into a lightweight header file. Rather
than creating a new one, transform the existing "site.h" into "zdev.h"
to house all generic zdev-specific definitions that needs to be shared
between chzdev, lszdev and zdev_id going forward.
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Up until now cpacfstats assumes that on the running hardware either all
PAI and CPUMF are available or non at all. Which counters are supported
may be hardware dependent and can vary in the future. With
this commit cpacfstats dynamically loads the counters from sysfs entries
in (/sys/devices/pai_crypto/events/) and (/sys/devices/cpum_cf/events/)
respectively.
Additionally cpacfstats has a new way of determining which PAI counters
are meant for kernel usage.
Signed-off-by: Finn Callies <fcallies@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
With f6c6f0cc71 ("rust/pv/test: Code + Certificate refactoring")
no code uses mockito anymore, but it's dependency was not removed.
Remove the mockito dependency from the rust workspace.
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
OpenSSL 1.1 seems to use a non-const parameter to X509_name_dup(), but
x509_armonk_locality_fixup() is passing a const there. The compile then
fails on "discards 'const' qualifier", when -Werror is used. Thus
resolve with a type-cast like in c2b_name().
Fixes: https://github.com/ibm-s390-linux/s390-tools/pull/167
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Dan Horák <dan@danny.cz>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
OpenSSL 1.1 seems to use a non-const parameter to X509_name_dup(), but
x509_armonk_locality_fixup() is passing a const there. The compile then
fails on "discards 'const' qualifier", when -Werror is used. Thus
resolve with a type-cast like in pv_c2b_name().
GitHub-ID: https://github.com/ibm-s390-linux/s390-tools/pull/167
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Dan Horák <dan@danny.cz>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Fix leak of temporary files: if prepare_build_program_table_file()
is called in no dry-run mode and there was an error then the file
@filename will not be deleted in free_bootloader()).
Fix leak of renamed files as well as corruption of previously
created bootmap files with the same name in case of unsuccessful
IPL installation.
Add a special flag to keep a track of file's "temporary" state;
Base the cleanup decision on this flag instead of checking dry-run;
Release resources captured by prepare_bootloader() in the error path;
Move the final rename to be called only after successful installation.
Original logic:
prepare_bootloader_ipl():
prepare_bootloader_ngdump():
always create temporary @filename
if (!dry-run) rename @filename;
install;
cleanup: if (dry_run) drop @filename (*** LEAK ***)
prepare_bootloader_device():
if (dry_run) create temporary @filename
install, don't rename;
cleanup: if (dry_run) drop @filename
New logic:
prepare_bootloader_ipl():
prepare_bootloader_ngdump():
always create temporary @filename and set @tmp_filename_created;
install;
if (!dry_run) rename @filename and clear @tmp_filename_created;
cleanup: if (@tmp_filename_created is set), drop @filename
prepare_bootloader_device():
if (dry_run) create @filename and set @tmp_filename_created;
install, don't rename;
cleanup: if (@tmp_filename_created is set) drop @filename.
Fixes: https://github.com/ibm-s390-tools/s390-tools/issues/165
Signed-off-by: Eduard Shishkin <edward6@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Acked-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Convert the assertion to a GError since an out-of-disk-space situation
is a valid situation that should be handled.
ERROR:utils/crypto.c:1843:__encrypt_decrypt_bio: assertion failed: (num_bytes_written == out_len)
Bail out! ERROR:utils/crypto.c:1843:__encrypt_decrypt_bio: assertion failed: (num_bytes_written == out_len)
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
The parser setup falsely set the argument type as filename array, but
code expected a single filename. Fixed by setting up the parser
correctly to expect a single file name.
Fixes: 3ab06d77fb ("pvattest: Create, perform, and verify attestation measurements")
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
New IBM signing keys will have Armonk as locality in the subject.
Ensure that CRLs with Poughkeepsie as issuer locality are still
discovered if they are signed with the signing keys private key.
Also, drop the check for issuer/subject comparison and only rely on
validity period and cryptographic signatures.
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
New IBM signing certificates will have 'Armonk' as locality in the
subject. Make sure that certificate revocations lists (CRL) with
'Poughkeepsie' as issuer locality are still considered as valid as long
as they are signed with the IBM signing keys private key. In addition,
drop the check for 'issuer(HKD) == subject(HKSK)' as it doesn't improve
security. While at it, remove now unused functions and fix a memory leak
of @akid in `check_crl_issuer`.
Reviewed-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
New IBM signing keys will have Armonk as locality in the subject.
Ensure that CRLs with Poughkeepsie as issuer locality are still
discovered if they are signed with the signing keys private key.
Also, drop the check for issuer/subject comparison and only rely on
validity period and cryptographic signatures.
Reviewed-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
* Get rid of Mockito
* create certs with AKID
* simplify things in the `create_certs.py` script
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
For LUKS2 volumes, zkey generates 'cryptsetup luksFormat' commands with
options '--pbkdf argon2i --pbkdf-memory 32 --pbkdf-force-iterations 4'
for low memory and time requirements. Using the default Argon2i options
might cause out-of-memory errors when multiple encrypted volumes are
unlocked automatically at boot through /etc/crypttab.
When the system runs in FIPS mode, which is indicated by file
/proc/sys/crypto/fips_enabled containing '1', the Argon2i password based
key derivation function might be disabled by a policy, and such
'cryptsetup luksFormat' commands might fail.
Generate '--pbkdf pbkdf2' instead if the system runs in FIPS mode.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Fix the support for staged installs. The Makefile variable `PKGDATADIR`
uses `DESTDIR` for all Makefile target, but actually it should only be
used for the `install*` and `uninstall*` targets. [1] Fix this by using
`DESTDIR` only for `install*` targets - uninstall* targets are not
supported by s390-tools.
Before this change, if `DESTDIR` was set for staged installs,
`genprotimg` has tried to find the bootloader binaries at the temporary
installation path `$DESTDIR$(TOOLS_DATADIR)/genprotimg/` instead of
`$(TOOLS_DATADIR)/genprotimg`.
[1] https://www.gnu.org/prep/standards/html_node/DESTDIR.html
Fixes: 65b9fc442c ("genprotimg: introduce new tool for the creation of PV images")
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Make ngdump_get_part_path() public in order for unit-tests to access it.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Clear CCW-type DASD standalone dumper (if installed on the DASD) upon
successful installation of the List-Directed ECKD dump tool on the same
device. This helps to avoid 'zgetdump -d' confusion and have only one
'active' dump tool per disk.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Acked-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Add DF_S390_DUMPER_MAGIC_SIZE constant to s390_dump.h.
Use it instead of hardcoded length when processing dumper magics
in zgetdump code.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Acked-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Move DUMPER_MAGIC constants from df_s390.h to the global header
include/dump/s390_dump.h in order to reuse it in zipl code.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Update dumpconf man page with list-directed ECKD dump information (new
attributes and configuration example for ECKD LDIPL dump).
Update etc/sysconfig/dumpconf with list-directed ECKD dump configuration
example.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
- Write the following sysfs attributes for list-directed ECKD devices
introducing setup_eckd_device() function.
br_chr: location of boot record
bootprog: boot program selector
- Remove redundant parameters from setup_ccw_device() and setup_fcp_device()
functioins.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Reject conversion of other key types with a proper error message.
Also fix a typo in another error message of the convert command.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Use similar `install` mode option in Makefile as in commit
9b2fb1d4d2 ("zdev: add helper to convert from dasd_mod.dasd to zdev
config").
Fixes: 73c46a3056 ("zdev/dracut: fix kdump by only activating required devices")
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
s390-tools doesn't define a common C/C++ standard at the moment.
Set the standard to gnu11/gnu++11, which is also used by the Kernel, and
establish a common baseline for all tools.
The -std flag is added to ALL_CFLAGS and ALL_CXXFLAGS to avoid losing it
in case CFLAGS are set by an outside entity.
It is also added to CLAGS_FOR_BUILD for this one special cross build
case.
The -std flag is removed from all tools that set it manually until now.
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Introduces the ability to `pvsecret` to add a signature (ecdsa or rsa)
to the program-reserved space (user-data) of an add-secret request
during the request creation. Additionally, some arbitrary data may be
inserted.
The new command `verify` checks if add-secret requests are sane (e.g.
start with the correct magic value). If the request contains a
user-signature `verify` will also verify this signature.
Acked-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Makes the source for the manfiles&README more readable. Fixes some nits
like double spaces, unnessecary indentations, line breaks, ...
Removes pvsecret-version.1 as this command maps to the --version
option.
Acked-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add a function to read a private key in PEM or DER format.
While at it, fix some documentation issues in read_{certs, crls}.
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
User-data can be added to add-secret requests. User-data can be unsigned
or containing a signature of the request using a custom private key.
The user-data is placed at offset 0x218 and 0x200 bytes long.
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add four new user-data types an add-secret request could have:
Unsigned, Signed(EcSECP521R1, Rsa(2048, 3072))
As the user-data enum was not marked as non-exaustive this might be a
breaking change for users. (Not for any crate in this repo though).
The addition of such user-data is provided by following patches.
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Improve the warning for the case where a host key document contains
multiple certificates (only possible for a PEM file). In case there are
multiple host key document only the first certificate is used.
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Fix a panic in `pvsecret` when a empty file is used as a host key
document.
$ touch hkd
$ pvsecret create --no-verify -k hkd --output req.bin --hdr sehdr
...
The host key document in 'bla' contains more than one certificate!
thread 'main' panicked at pvsecret/src/cmd/create.rs:192:31:
Fixes: dd82c26f87 ("rust: Add tool to manage UV-secrets")
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Use the `TemporaryDirectory` type to create a temporary directory. This
type has the advantage that the directory is automatically removed once
it goes out of scope. The old implementation in test_sysfs_write_i32
leaks a directory if a previous subtest failed. Also, using a temporary
directory for the LockFile test fixes the following error:
$ RUST_BACKTRACE=1 cargo test -- helper::tests::test_lockfile
...
running 1 test
test helper::tests::test_lockfile ... FAILED
failures:
---- helper::tests::test_lockfile stdout ----
thread 'helper::tests::test_lockfile' panicked at pvapconfig/src/helper.rs:265:9:
assertion failed: r1.is_ok()
stack backtrace:
0: rust_begin_unwind
at /rustc/79e9716c980570bfd1f666e3b16ac583f0168962/library/std/src/panicking.rs:597:5
1: core::panicking::panic_fmt
at /rustc/79e9716c980570bfd1f666e3b16ac583f0168962/library/core/src/panicking.rs:72:14
2: core::panicking::panic
at /rustc/79e9716c980570bfd1f666e3b16ac583f0168962/library/core/src/panicking.rs:127:5
3: pvapconfig::helper::tests::test_lockfile
at ./src/helper.rs:265:9
4: pvapconfig::helper::tests::test_lockfile::{{closure}}
at ./src/helper.rs:263:24
5: core::ops::function::FnOnce::call_once
at /rustc/79e9716c980570bfd1f666e3b16ac583f0168962/library/core/src/ops/function.rs:250:5
6: core::ops::function::FnOnce::call_once
at /rustc/79e9716c980570bfd1f666e3b16ac583f0168962/library/core/src/ops/function.rs:250:5
note: Some details are omitted, run with `RUST_BACKTRACE=full` for a verbose backtrace.
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-By: Harald Freudenberger <freude@de.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add the type `TemporaryDirectory` that creates a temporary directory
that is automatically removed when it goes out of scope.
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-By: Harald Freudenberger <freude@de.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Recent changes makes it reasonable to update the version string of pv
and pv_base to 1.0.0. Recent changes introduced some non-backwards
compatible changes, like move some Error definition from pv to the new
pv_core crate. Also, the pv crates seem to be in a good shape to be
considered released.
Therefore, move up the Semver to 1.0.0.
See also:
https://doc.rust-lang.org/cargo/reference/specifying-dependencies.html
NOTE: As these crates are not published to `crates.io` as of now, the
version number is meaningless, as cargo will not pull them from
anywhere and just use the files provided by this repository.
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Update the zerocopy dependency from v0.6.* to the non forward compatible
v0.7.*. Incompatible changes are the requirment of the FromZeroes trait
for FromBytes trait and the non-default derive feature which this
patches handles as well.
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Use a static Mockito server instead of creating multiple on-the-fly
during testing. Add the `mockito_server_available` test to quickly
verify that the mockito server could be constructed. Relocate the
verifier API test to the test folder as it tests the public API. Also,
make the Debug impl for CertVerifier public. The test relocation
requires this. Before, there could be a test local implementation of the
Debug impl as it was in the same crate.
While at it, get rid of the lazy_static crate in favor of the once_cell
crate. As the new std lib implementation is very near to the one from
once cell. The project will switch to the std impl when v1.70 is
available in all supported distros. See:
https://doc.rust-lang.org/std/sync/struct.OnceLock.html
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Replace all libc references to rust-std references if available.
This eliminates the need to include libc in the pv crate.
However, pv_base still refers to libc::ioctl and libc::ENOTTY.
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The rust std lib already provides functionality to compare two slies.
Replace all `memeq` invocations with == and remove the `memeq` function.
As a side effect this eliminates some unsafe code in this crate.
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Big refactoring patch of the pv crate. The main reason behind this
refactoring is to simplify testing and maintaining the pv crate while
keeping OpenSSL/libcurl dependencies optional. Using crate features
increases the number of targets that have to be tested. This refactoring
eliminates the use of features by splitting the functionality of pv into
a use OpenSSL and no-use-OpenSSL crate.
Split off some code from the pv crate into a pv_core crate. pv requires
pv_core and reexports all symbols. pv_base contains all code from former
pv that does not use OpenSSL or libcurl functionalities. The refactored
pv crate contains functionalities to generate requests and validate host
key documents. All features from pv are dropped as they are not needed
anymore and to streamline the codebase for easier use and testing. While
at it fix some documentation issues.
Users (pvsecret & pvapconfig) have next to no code change, besides the
different import of the crate.
Acked-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
A function does the job as well. This improves code readability and
useability. While at it remove the implicit Buffer wrapper. Users are
currently not use the benefits of a buffered write. Also, streamline the
write_out helper function.
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
With kernel commit 496bb034f4ff ("s390/smp: disallow CPU hotplug
of CPU 0") it is no longer possible to hotplug CPU 0.
As a side effect, the sysfs handle /sys/devices/system/cpu/cpu0/online
does no longer exist. Since cpuplugd relies on checking all online
handles of all CPUs, this change causes cpuplugd to fail as it
interprets a non existing online file as an indicator that no other CPUs
with higher IDs exist as well. This leads to cpuplugd assuming that
there are no CPUs available.
Instead of checking for the online file, it is preferable to check for
the existence of the parent folder to verify the existence of a CPU.
As a consequence, all other checks for non-existing online files must
now imply that the CPU is online, but not hotpluggable.
Signed-off-by: Tobias Huschle <huschle@linux.ibm.com>
Tested-by: Mete Durlu <meted@linux.ibm.com>
Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
When pai records data it may fail in select() system call.
This error is not reported and the pai program exits with success.
Change this and exit with proper exit code.
Fixes: d7b1cbad8b ("cpumf/pai: Add Processor Activity Instrumentation tool")
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Running command pai -r <file> might encounter entries of type
PERF_RECORD_SWITCH. Entries of that type are currently not handled
and cause an error message:
# pai -r ~/paicrypto.000
unknown header-type 14 unknown header-type 14 \
unknown header-type 14 ...
The error message is not terminated by a newline.
Handle entries of this type PERF_RECORD_SWITCH. These records
do not carry any payload at all, just a bit is set in the
header::misc member. This bit set determines context switch out.
Output after:
# ./pai -r ~/paicrypto.000
0x4b814018f4f3 6 cs-out
0x4b817bc3c936 6 cs-in
0x4b817bc5246c 6 cs-out
0x4b817bd90e9a 6 cs-in
....
#
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add pre-commit (https://pre-commit.com/) configuration to allow
developers to run certain checks on their commits automatically.
Currently enabled checks and hooks are:
- Generic checks (e.g. merge-conflicts, trailing whitespace, etc.)
- git clang-format
- Codespell
- Shellcheck (https://www.shellcheck.net/)
Note: For some hooks Rust is excluded as a lot of false positives are
produced at the moment.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
step "initrd config files" was added as 19th step to our data collection
updating for newer date and distro version in the sample output
Reviewed-by: Michael Storzer <mstorzer@de.ibm.com>
Signed-off-by: Joern Siglen <siglen@de.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
pvapconfig is a new tool for automatically configuring the APQNs
within an Secure Execution KVM guest with AP pass-through support.
Based on a given AP configuration it tries to find a matching
APQN and bind and associate it with the correct secret.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Adds getter for SecretList and SecretEntry.
Adds enum to represent secret types.
Add Iterator functionality for SecretList.
While at it, make the datatype of the capacity of the list transparent
for users.
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
For each initrd, collect verbose content listing as well as
the content of files matching the file glob patterns in $CONFIGFILES.
For dracut-squash such as RHEL kdump, this includes squashfs content.
Code is intentionally compatible with dash, so no bashisms.
Ubuntu initramfs has zdev persistent device configuration udev rules under
/lib/udev/rules.d/ (as opposed to /etc/udev/rules.d/).
Ubuntu initramfs stores configuration under /conf/.
Ubuntu kdump-tools have initrds under /var/lib/kdump/.
SLES auxiliary boot stage with grub2-s390x-emu has initrds under /boot/zipl/.
Dracut initramfs stores configuration under /etc/cmdline.d/ and /etc/conf.d/.
Dracut kdump have initrds under /boot/.
Github-ID: https://github.com/ibm-s390-linux/s390-tools/pull/158
Reviewed-by: Fedor Loshakov <loshakov@linux.ibm.com>
Acked-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Acked-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Converts zdev configuration into the syntax of the dracut cmdline option
rd.znet. Only znet options with non-default values are emitted. The result
string occurs on stdout. It represents one device-specification for the
given network interface name.
Example:
/lib/s390-tools/zdev-to-rd.znet persistent encbdf0
qeth,0.0.bdf0,0.0.bdf1,0.0.bdf2,layer2=1
User:
https://github.com/rhinstaller/anaconda/pull/5250
to generate dracut cmdline entries such as
rd.znet=qeth,0.0.bdf0,0.0.bdf1,0.0.bdf2,layer2=1
Github-ID: https://github.com/ibm-s390-linux/s390-tools/pull/158
Acked-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Acked-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Useful for debugging (what happened during early boot).
Also useful for distro installers, which can import the early config into
their own environment early after starting:
chzdev --import /run/zdev.initrd.config --persistent --yes \
--no-root-update --force --verbose
After that, distro installers can modify/add the device config based
on interactive or unattended installation choices using
chzdev --enable --active --persistent ...
Finally, distro installers can likewise transfer the entire device config
to the installed system mounted under $SYSROOT:
chzdev --export /tmp/zdev.config --all --type --persistent --verbose
Github-ID: https://github.com/ibm-s390-linux/s390-tools/pull/158
Acked-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Acked-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add parsing of dracut cmdline option "rd.zfcp=..." at initrd runtime.
It delegates configuration to chzdev.
Implement `dracut --print-cmdline` and `dracut --hostonly-cmdline` for
initrd build time. Emit an rd.zfcp option for each zfcp-attached SCSI disk
in dracut's device dependency graph (to mount the root-fs, or to access the
kdump target).
This allows a distribution independent device configuration.
Configuration is consistent by using chzdev as backend.
It also prevents duplicate activations of the same device.
Along with the existing functionality of zdev/dracut, it makes the
following dracut modules superfluous:
https://github.com/dracutdevs/dracut/tree/master/modules.d/95zfcp
[rd.zfcp.conf is no longer needed and thus ignored here; the preceding
("zdev/dracut: fix marking hostonly files so delete option works")
makes rd.hostonly=0 work as a generic replacement]
https://github.com/dracutdevs/dracut/tree/master/modules.d/95zfcp_rules
Github-ID: https://github.com/ibm-s390-linux/s390-tools/pull/158
Acked-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Acked-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The existing code can already determine the required devices for the
actively running system, but this does not work for execution environments
in different (disaster recovery) sites.
Kdump likely does not notice when running in a different site and does not
re-generate the kdump initrd (because the kdump config itself does not
change).
The new code allows users to explicitly specify devices required for early
boot in initrd on different sites. Assuming this is a small number of
devices and could even overlap between the root-fs and the kdump case, do
not further distinguish those two sets of devices, but simply use the same
marker attribute "zdev:early=1" for both cases. With all this site
information available at the (initial) kdump initrd generation, the
resulting kdump initrd can work on any site without having to re-generate.
Complements commit 3c7adcc3c81d ("zdev: dracut: modifiy the
module-setup.sh").
Github-ID: https://github.com/ibm-s390-linux/s390-tools/pull/158
Reviewed-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Acked-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Acked-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The existing code can already determine the required devices for the
actively running system. In case users would have a need to configure
additional devices for early boot in kdump initrd, import those devices
marked with "zdev:early=1" for completeness. Assuming this is a small
number of devices and could even overlap between the root-fs and the kdump
case, do not further distinguish those two sets of devices.
Github-ID: https://github.com/ibm-s390-linux/s390-tools/pull/158
Reviewed-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Acked-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Acked-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Additional debugging output can be generated with e.g. dracut option
"--stdlog 5" (or short -L5). It shows the chzdev export result, the output
of chzdev imports, and an overview of the resulting persistent config
within the initrd.
On systems, which default to using dracut option "--quiet", you might need
an additional "--verbose" to counter "--quiet" so -L5 has effect.
Typically combined with "--debug" to get a shell trace from building an
initrd (Note: --debug does not increase the log levels).
Github-ID: https://github.com/ibm-s390-linux/s390-tools/pull/158
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Acked-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Acked-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Otherwise, dracut skips modules that are "not hostonly", i.e. not used /
loaded on the system when running dracut to build an initrd.
Without the fix, zdev device auto configuration only works for device
types for which a device driver happened to be loaded when building an
initrd. Likewise for specifying rd.* boot options.
Hostonly mode is often the default in Linux distributions.
Make zdev device auto configuration work nonetheless without users
having to know about and tweak dracut modes for initrd generation.
On the typical sloppy hostonly mode, the code disables hostonly for
installing kernel modules. This covers building regular initrds, where zdev
device auto configuration should even work for device types, for which
device drivers were not loaded when an initrd was generated. This can
happen when new devices of new types are configured for a DPM logical
partition. Also, users could want to start using dracut cmdline options
rd.{dasd,zfcp,znet} for a device type that was not used when the initrd was
built.
The special strict hostonly mode is used by some kdump implementations. In
that case, hostonly remains in effect intentionally because only support
for the really required devices as determined by dracut module 95zdev-kdump
should be included in a kdump initrd due to the memory-constrained kdump
environment. Cf. commit 73c46a3056 ("zdev/dracut: fix kdump by only
activating required devices"), which also provides more references on
strict hostonly mode. Even for non-kdump cases, let strict hostonly mode be
effective here in 95zdev in case some future use case appears for this
special mode beyond kdump.
Github-ID: https://github.com/ibm-s390-linux/s390-tools/pull/158
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Acked-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Acked-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The sscanf() format specifiers for signed and unsigned int mistakenly
used "%d"/"%u" prefix analogous to "%l" for long but those do not exist.
Fixes: 37348ef662 ("libutil: add util_file_read_i()/util_file_read_ui()")
Acked-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
The crate dependencies were a bit to slack. Due to the rust dependency
resolver's strategy of always selecting the latest version this never
lead to any issues.
This has no impact on the workspaces Cargo.lock
Reviewed-by: Marc Hartmayer <marc@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
With the last patch introducing the rust workspace the location of
Cargo.lock has changed. Therefore, remove all crate level lock-files and
add rust/Cargo.lock as the only lock-file.
Steps to reproduce:
```
cd rust
mv pvsecret/Cargo.lock .
cargo build
cargo update -p openssl
cargo update -p curl-sys
cargo update -p rustix
```
While at it update some dependencies to get fixes for security issues.
Reviewed-by: Marc Hartmayer <marc@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
A workspaces simplifies the build and packaging process significantly.
All build artifacts and binaries are now built in a single location
(e.g., rust/target/release/*), and a unified dependency resolution is
used. Hence one Cargo.lock for all crates at rust/Cargo.lock.
Closes: https://github.com/ibm-s390-linux/s390-tools/issues/156
Reviewed-by: Marc Hartmayer <marc@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Since mdevctl commit acf78c1ff6c9 it is now possible for the
get-attributes event to occur between a pre-define and post-define.
This is done in order to obtain the active attributes for the device
before writing them to the config file, and implies that the
get-attributes cannot re-obtain the file lock. For other cases
where mdevctl calls get-attributes, the file lock is not already
held and must be obtained by ap-check before reading attributes from
active devices.
To solve this, let's use the knowledge that mdevctl is a single-threaded
tool and add a test to detect this scenario. If the file lock is
already held by the parent during a get-attributes, don't attempt to
re-acquire it.
Reported-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Add a check to the stage3b that the kernel cmdline is always
null-terminated. While at it, ensure the coding style is consistent.
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Make sure that the kernel command line used for the Secure Execution
boot image is always null-terminated. Before this change, users had to
ensure that the provided kernel cmdline was null-terminated, which was
error-prone. But since the default s390x Linux kernel command line is
set to `root=/dev/ram0 ro` the remaining reserved memory for the kernel
command line is zeroed out. Therefore, the problem only shows up if the
used kernel command line is shorter than the default kernel command
line.
Fixes: 65b9fc442c ("genprotimg: introduce new tool for the creation of PV images")
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Fix a valgrind finding. Fix an invalid read/write of one byte after the
actual struct to clear. Not fixing this may result in a illegal write or
memory corruption of the program. Fortunately, for the actual only user,
pvsecret this is not the case.
Fixes: c6f621d0 ("rust: Add library for pv tools")
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Pai collects data from per CPU ring buffers and stores them in the
memory mapped output file. When data is collected from many CPUs at
the same time, writing data to output file can be slow.
Improve this and allow the pai recording to run with higher
real time priority. This is the same approach as done by the perf tool.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
in customer situation we found lsqeth listing devices like:
Device name : (unnamed net_device)
Device name : enc2000
Device name : enc3000
- the braket around the "unnamed" device is braking the function call and
leads to stop the dbginfo.sh script.
- this patch removes brakets > the functions call works and call of osaoat
will report an unknown device instead of braking the dbginfo.sh script
Reviewed-by: Mario Held <mario.held@de.ibm.com>
Signed-off-by: Joern Siglen <siglen@de.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Make the description of the --keep_volser option more generic and avoid
mentioning specific tooling.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The zipl bootloaders are s390x specific, so only build them if the
`HOST_ARCH' is set to s390x.
While at it, rename `INC_FILES` to `EMBEDDED_BOOTLOADERS`. Also
introduce `EXTERNAL_BOOTLOADERS` variable and use it in the `install`
Makefile target.
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
When checking if a card or an APQN is online, not only check the 'online'
sysfs attribute, but also check the 'config' and 'chkstop' attribute.
Cards and APQNs in check-stopped or deconfigured state can still be reported
as online via the sysfs attribute, although they are not available to be
used for zkey.
In case the 2 additional sysfs attributes are not available in sysfs, then
don't fail, but rely on the 'online' attribute only.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Move the code responsible for installing stage3.bin to the
boot/Makefile. In addition, remove the stage3.bin from the Makefile
`all` target prerequisites in src/Makefile, as zipl can be built without
it. While at it, use $(INSTALL) instead of $(CP) for the bootloader
installation.
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Linux stable kernels can reach greater than 256 sublevels [1],
which can cause the cpi tooling to generate an invalid string
that gets passed to the firmware and causes unusual responses:
$ uname -r
5.4.255
$ cat /sys/firmware/cpi/system_level
0x04260000000504ff
--reboot--
$ uname -r
5.4.256
$ cat /sys/firmware/cpi/system_level
0x4260000000504100
The first sublevel field is defined as one byte, so ensure that
a value larger than that isn't included.
[1] https://lore.kernel.org/lkml/1612534196241236@kroah.com/
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Currently ZDEV_SITE_ID is derived with the help of an additional
udev-rule, 40-zdev-id.rules. The sole purpose of this rule is to
determine the ZDEV_SITE_ID environment value with the help of zdev_id
binary. This solution is minimal, but this has some unwanted side-
effects. The zdev_id logic get executed for all the events, even
those completely unrelated to zdev/or site, and imports the unneeded
envionment values to the udev-db.
Instead of having an additional rule file, add this logic as part of
the udev-rule of those devices which are configured with site-support.
The logic will then be available on all those rules with the
site-supported devices only.
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Introduce dev_site_configured macro,which can be used to find the
availability of site configurations for the device during udev rule
creation.
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Previously SITE_FALLBACK and other site-specific configuration support
macros were defined in device.h. Instead, move them to a relatively
smaller header file which is exclusive for site-related definitions.
This way, light-weight zdev_id also can use the same header file.
Reported-by: Steffen Maier<maier@linux.ibm.com>
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Behaviour of the qeth performance_stats sysfs attribute has changed
with kernel commit
b0abc4f5df76 ("s390/qeth: overhaul ethtool statistics")
that went into kernel v5.1.
Before the kernel commit
- collection of statistics was turned on and off by writing 1 or 0
- default after device activation was 0
- statistics were reset by writing 0
After the kernel commit:
- collection is always on
- attribute always reads 1
- statistics is reset by writing 1; writing 0 is a no-op
Problems of chzdev on new kernels:
chzdev cannot reset statistics ('performance_stats=1' does nothing).
'chzdev --export' always lists performance_stats.
'chzdev qeth --help-attribute performance_stats' reflects old behaviour.
This patch will do the following:
'chzdev qeth --help-attribute performance_stats' reflects new behaviour.
'chzdev --export' does not list performance_stats on new kernels.
'chzdev performance_stats=1' resets statistics on new kernels.
'chzdev performance_stats=0' still resets statistics on old kernels,
does nothing on new kernels.
Suggested-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
With many CPUs, such as triple digit counts, the by default many empty
sysfs directories are prohibitive to collect, especially if the number
of SCSI disk devices is also large, such as 4-digit counts.
Excluding them from being collected from sysfs saves hundreds times
thousands of archive entries and inodes on expansion.
Since the number device-mapper devices (multipath and other target types
such as LVM) is smaller and can include devices not backed by zfcp, keep
collecting
/sys/devices/virtual/block/dm-[0-9]*/mq/0/cpu[0-9]*/
Definitely keep collecting
/sys/kernel/debug/block/{sd,dm-}*/hctx0/cpu[0-9]*/
as it contains actual statistics files:
completed default_rq_list dispatched merged poll_rq_list read_rq_list
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Replace static_assert() with STATIC_ASSERT macro from zt_common.h in order
to get rid of glibc dependencies in zipl/boot and comply with older
C standards.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Suggested-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Set the maximum line length for branch description messages (`git branch
--edit-description`) to 72 characters.
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Update zgetdump man page with the information of compressed DASD dumps
support as well as new verbose 'zgetdump -i' output entries.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Move DF_S390_DUMPER_SIZE_* constants from zdump/df_s390.h to
boot/loaders_layout.h since ccw dumper size depends on the zipl boot
loader layout (to keep it all in one place).
Rename DF_S390_DUMPER_SIZE_* constants to STAGE2_DUMPER_SIZE_*
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Update verbose 'zgetdump -i' output with zlib info (internal zlib version
and zlib compression unit size).
The following new entriees are to be dispalyed:
Zlib version.......: 1
Zlib compression unit: 1 MB
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Increase the auxiliary buffer size from 8 pages to 1 megabyte in order to
significantly increase compressed dump processing speed.
For uncompressed dumps, the effect is minor.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Update dfi_s390.c to support reading of compressed dump segments.
For this, introduce a callback function for reading memory chunks
associated with compressed dump segments. Apart from the segment location
on disk this function requires the entry_offset array from the dump segment
header in order to process each compressed entry separately, thus allowing
fast seek processing for zgetdump (no need to decompress a big dump segment
to extract a single piece of data).
In addition, split mem_chunks_add_ext() in several functions.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Since we are using the existing s390 extended dump format for compressed
dumps as well, set the version of the s390_ext dumper with compression
support and also dump header of the compressed dump to '2' (in order for
zgetdump to distinguish).
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Acked-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
- Adjust progress_print() calls to pass updated address after the set of
blocks has been written to disk.
- Currently total_dump_size value is updated only after the entire dump
segment is written to disk what leads to ambiguos Dump file size values
displayed by progress_print(). Change write_addr_range() to re-calculate
total_dump_size after each set of blocks has been written to disk thus
printing the correct value at the end of each log entry.
- Avoid final log entry duplication.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Acked-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
With current implementation, printing progress while writing a compressed
data chunk might be very inaccurate. Thus, for compressed dump segments
skip progress_print() in write_addr_range() and call it after each
compressed memory chunk is written to disk. For that change
write_addr_range() to call progress_print() conditionally based on the new
print_progress parameter.
For non-compressed dump segments, call progress_print() from
write_addr_range() just as before.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Acked-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add --no-compress option to explicitly omit compression for single-volume
DASD dumper. Used primarily for test purposes.
Since only the lowest byte of mvdump_force field (struct
stage2dump_parm_tail) has been used, split it in two byte fields and use
one for the new no_compress attribute.
Update zipl help and zipl man page with the new parameter info.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Move struct stage2dump_parm_tail from stage2dump.h in to
include/dump/s390_dump.h
Pass the entire stage2dump_parm_tail structure to install_dump_* functions
instead of individual parameters.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Use a separate linker script eckd2dump_sv.lds for single volume dumper with
compression support.
The new dump tool with zlib compression support now has a size of 8 pages.
Since DASD stand alone dump requires a block size of 4K, we are not
affected by the stage 2 size limitations and can load the dumper to
stage 2 as before. We just need to move the HEAP section for ECKD dumper
in the layout definitions up to 0xb000 address. Also expand the stack by
unused 0x400 bytes.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Integrate zlib DFLTCC deflate compression to single volume dasd dumper
using the existing s390 extended dump format. Compression takes place
only if DFLTCC facility is available, otherwise dump is written
uncompressed as before.
First megabyte of memory is always written uncompressed and afterwards
this area is used for zlib workspace and for the compression output buffer.
The compression takes place in chunks of data of equal size (currently 1MB)
and the offset of each compressed chunk is stored in the dump segment
header. Since existing dump segment headers of 1 page size are used, we
need to limit the maximum size of compressed dump segments.
Chunk is written uncompressed in case of compression error or if
deflate compression only makes it bigger.
Thus every chunk of data is compressed separately and can be decompressed
independently. The main reason for that is to enable zgetdump to make fast
read seeks. Otherwise, zgetdump would need to decompress a big dump segment
in the worst case to extract a single piece of data.
Put compression related functions and structures to eckd2dump_zlib.c
and eckd2dump_zlib.h
Update zipl man page with the general information of zlib compression
support.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Move code from write_dump_segment() to write_addr_range() function to use
it later for writing compressed dump segments as well.
Verify that passed address range is a multiple of dasd block size.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Instead of using its own DF_S390_ constants and df_s390_ structs
in df_s390.h, include those from "dump/s390_dump.h" in order to minimize
duplicates. Adjust the code, where required, to use <stdint> types
instead of those defined in zt_common.h (e.g. use uint64_t instead of u64).
Adjust zdump include statements.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Move common dump related structures and constants to the global header
"dump/s390_dump.h" in order to get rid of many duplicates in zgetdump code.
Adjust zipl include statements and update Copyright statements.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Mainly zlib code remains unchanged for the sake of further maintenance.
Only minor adjustments of zlib deflate parts for build purposes:
- Make is_dfltcc_enabled() always return true
- Define CONFIG_ZLIB_DFLTCC in zlib.h to build zlib code with DFLTCC support
- Remove inflate related prototypes from zlib.h
- Adjust oesc_msg() to use snprintf from libc.h
- Remove BUG_ON from zlib_deflate_workspacesize()
- Replace bitrev32() with bi_reverse() from defutil.h
- Include <assert.h> to dfltcc.h header because of static_assert() calls
- Fix other include statements
- Adjust the text in zipl.h following Zlib License requirements
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add required zlib_deflate parts based on kernel zlib code in preparation
to DASD dumper DFLTCC deflate exploitation. Omit inflate modules in
order to minimize the dumper size (no decompression is required for the
dumping).
Adjust include statements leaving other code as is.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The AP queue states within a SE guest may have a so called asynchronous
error pending. When that's the case, the sysfs read of some AP queue
attributes fails with EIO. lszcrypt was not really prepared for this
and instead showed some incorrect output.
This patch fixes this oddity and now lszcrypt -c shows "error" in case
of ap_bound or ap_associate read errors and lszcrypt -V shows also
"error" if the BS bits could not get fetched.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
`pkg-config` is mandatory for compiling s390-tools anyway therefore
let's replace `curl-config` and `xml2-config` calls whenever possible.
In addition, `pkg-config` has the advantage that cross-compilation is
supported. While at it, use `pkg-config` for libcrypto, json-c, and
libssl as well.
Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The pkey kernel module supports two key blob formats for EP11 AES keys.
The first one (PKEY_TYPE_EP11) contains a 16 bytes header that overlays
the first 32 bytes of the key blob which usually contain the ID of the
EP11 session to which the key is bound. For zkey/dm-crypt that session
ID used to be all zeros. The second blob format (PKEY_TYPE_EP11_AES)
prepends the 16 bytes header to the blob, an thus does not overlay the
blob. This format can be used for key blobs that are session-bound, i.e.
have a non-zero session ID in the first 32 bytes.
Change zkey to generate EP11 keys using the new format (i.e. pkey type
PKEY_TYPE_EP11_AES), but existing key blobs using the old format can
still be used.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Joerg Schmidbauer <jschmidb@de.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Add lspai program and man page to display Processor Activity
Information (PAI) facility counter sets in the same way as
lscpumf for the CPU Measurement Facility counter sets.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
When calculating smt utiliziation field, subresults are capped to a
minimum value of zero to prevent wrap around while converting values
from signed to unsigned integers. The capping of subresults cause slight
inaccuracies therefore capping has been moved from intermediate steps
and done at the end.
Fixes: 0209c11bc1 ("hyptop: Add real SMT utilization field")
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
This complements v2.27.0 commit 73c46a3056 ("zdev/dracut: fix kdump by
only activating required devices"). On older distributions, the absence of
zdev_id can cause the following harmless error messages for each udev
event:
(spawn)[387]: failed to execute '/lib/s390-tools/zdev_id' \
'/lib/s390-tools/zdev_id': No such file or directory
Kdump is still functional nonetheless.
As of v2.24.0 commit 2e89722ef0 ("zdev: make site specific udev-rule for
ccw"), the invocations of chzdev within
zdev/dracut/95zdev-kdump/module-setup.sh generate
/etc/udev/rules.d/40-zdev-id.rules. And so even though zdev-kdump
intentionally does not install zdev_id and its previous singular user
zdev/udev/81-dpm.rules into the kdump initrd, because DPM device auto
configuration is not desired in the kdump environment, zdev_id meanwhile
has an additional functionality for site-support and the generated
40-zdev-id.rules calls /lib/s390-tools/zdev_id. By installing zdev_id into
the kdump initrd, 40-zdev-id.rules can work without error.
Fixes: 73c46a3056 ("zdev/dracut: fix kdump by only activating required devices")
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Other tools may need to process the configuration-unique id. Provide a
machine readable format by writing to a YAML file containing a `cuid`
entry and optionally an `add` entry. New CLI options `--format` and
`--output` are introduced for this. Currently, only the output format
`yaml` is supported.
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Refactor the code responsible for printing the verification result into
a new function named `fprint_verify_result`. This function will be
reused in the future and a new output format will be added. While at it,
increase the dump data width for the addition data. In addition, add a
prefix `0x` to the values in order to indicate that these are
hexadecimal values.
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add `beautify` parameter to `pvattest_hexdump`. If the parameter is set
to true, a offset and whitespaces will be added for better readability.
With beautify set to FALSE:
14141414141414141414141414141414
With beautify set to TRUE:
0x0000 1414 1414 1414 1414 1414 1414 1414 1414
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The only user of `pvattest_hexdump` uses GBytes anyway, therefore let's
use GBytes as parameter type for `pvattest_hexdump`.
While at it, change the order of the parameters, constify `@width` and
handle the `@width == 0` case, which results in an hex-string without
any line breaks.
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This fixes the following error (using GNU Make 4.3.0):
make[2]: command: Command not found
The reason for this is that `command` is a bash builtin. `command` is
used in `common.mak` for the `combdb` Makefile target.
While at it, remove the now useless `SHELL := /bin/bash` definitions in
the sub-Makefiles.
Fixes: 3d098416c6 ("common.mak: add `compdb` Makefile target")
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Replace local ifs_orig variables in different functions by a single
global IFS_ORI variable. This will reduce the risk of missing a local
saving and restore of the original IFS.
Reviewed-by: Michael Storzer <MSTORZER@de.ibm.com>
Signed-off-by: Joern Siglen <siglen@de.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add a README.md to the rust subdirectory as a guideline for writing
s390-tools tools in Rust. This includes build integration, dependency
handling, and a few coding style hints. Rust related information
is also added to the main README.md.
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
[hoeppner@linux.ibm.com: Adapt details in README.md]
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add `pvsecret` a tool to create, add, list, and delete Ultravisor
secrets. `pvsecret` uses the functionality from the pv-crate
to provide an command line tool to manage the secrets.
Add a new target group PV_TARGETS in rust/Makefile that additionally
requires openssl and libcurl as pv with the feature "request" uses
openssl and libcurl fearures.
Acked-by: Jan Höppner <hoeppner@linux.ibm.com>
Acked-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
[hoeppner@linux.ibm.com: Adapt man pages and help output]
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add a `pv` crate that bundles useful functions and structs for creating
requests like `Attestation`, `Add Secret`, or even `Boot` a.k.a.
Secure Execution Image.
Note pv includes a subcrate `openssl_extensions` that (temporarily)
bundles some needed `openssl-rust` functionalities that are not
upstream yet. The plan is to remove these, when they become
upstream.
The pv crate has multiple features:
* request - code to generate requests
* uvsecret - code to access the UV-secret api
with request enabled also generating requests is
possible
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Acked-by: Jan Höppner <hoeppner@linux.ibm.com>
Acked-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The rust integration into the s390-tools build system consists of the
following steps:
- Add a subdirectory for the rust code.
- Add a Makefile that forwards rust builds to `cargo`.
- Add a `utils` crate for rust code in s390-tools.
- Add rust stuff for dotfiles:
- gitignore
- editorconfig
- codespellrc (while at it, add an ignore file)
With cargo the rust ecosystem has its own build system which also is
responsible to resolve rust dependencies via downloading the dependencies
from (default) crates.io and discover the source files. Therefore, the
Makefile just calls `cargo build` to forward the build to cargo.
If a rust crate does not require external dependencies, users might call
rustc directly.
A simple `make` will build all the rust targets as well (with --release
specified). Also `make install` will work as usual.
A few Makefile configuration variables are introduced for rust/Cargo:
- HAVE_CARGO (default 1) to toggle the build of rust code using cargo
- CARGOFLAGS to add custom cargo flags, e.g. --offline
- CARGO Cargo binary location defaults to
$(where cargo)
A new global make target is defined to get the current s390-tools
version:
$ make version
2.28.0
rust/Makefile also has the `print-rust-targets` target to print all rust
directories/crates that should be shipped/installed.
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Acked-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Command vmur issues a warning and aborts receiving a file from
the reader when either option -t or option -b is specified.
Example:
./vmur re -t 0x25,0x40 22 -H /tmp/xxx.txt
vmur: Conflicting options: -b and -t are mutually exclusive.
This is wrong as there is only one option specified.
The command should be aborted only when both flags are specified.
Fix this wrong behavior.
Fixes: d5f853c460 ("vmur: Remove option -c for dump file conversion")
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reported-by: Benjamin Block <bblock@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
IBM Secure Execution guests may want to share additional secrets with
the Ultravisor in a secure manner. For this the concept of secret
requests and three new Ultravisor-calls were introduced.
Add support to genprotimg to prepare an Secure Execution image with the
requirement that add-secret requests must provide an extension secret
that matches the customer communication key (CCK) derived extension
secret.
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
In preparation for the next patch, add the parameter `NAME` to the
`MUT_EXCL_BOOL_FLAG` macro. This is useful for the case when the command
line flag has a different naming than the struct field.
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Refactor arguments related to the SE header control flags into own
struct with the name `PvControlFlagsArgs`. This change makes it easier
to extend the control flags arguments further, without touching the
signature of `pv_img_set_control_flags`. While at it, rename the struct
members `allow_...` to `enable_...`. This matches with the command line
option names.
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Introduce a function for setting the control flags. This makes it easier
to add more control flags in the future.
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Simplify the clean target since there are several redundant
things (*.bin) and files that aren't built at all (.xxx and .yyy).
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Only the bootloaders cannot be built as PIE and for that there are
already the -no-pie linker and compiler flags set by the boot/Makefile.
In addition, remove the `noexecstack` linker flag as it has no use
anymore (see commit 518bf7d7357 ("zipl/boot: use
`--no-warn-rwx-segments` linker flag")). It was originally introduced to
declare the ELF segment of the bootloader stack as non-executable. But
this ELF attribute had no effect for multiple reasons:
1. ALL_LDFLAGS is not used for the bootloaders
2. no ELF loader is used for the bootloaders that would take this ELF
attribute into account
This fixes the problem of overriding `-fPIE` set by the distributor.
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Set the maximum line length for commit messages to 72 characters, and
the indentation style for Makefiles to TAB.
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Currently, the debug information of the bootloader is discarded during
the raw binary creation. Change this by creating separate
<loader>.bin.debug files containing the debug information. The packager
will then be able to package these files as desired and the developer
can use them to debug the code.
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
When creating a tar archive, dump2tar incorrectly truncates the last
character of file paths that are exactly 100 characters long.
Paths up to 100 characters can be represented in the 100-byte name field
of a tar header entry, while longer paths are handled via an additional
tar data block. For 100-character paths, dump2tar determines that a
single header is sufficient, but then uses util_strlcpy() to store the
path into the name field. Since util_strlcpy() ensures nul-terminated
strings, the final character of the path is overwritten.
Fix this by using strncpy() instead of util_strlcpy(). Also mark the
affected name fields as "nonstring" to prevent associated compiler
warnings.
Reported-by: Steffen Maier <maier@linux.ibm.com>
Fixes: d85cf20981 ("dump2tar: Change SET_STR_FIELD to copy strings correctly")
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Commit 62ec87680a61 ("common.mak: improve cross compilation support")
added one extra whitespace during the changes of the toolchain command
definitions. The rest of the commands did not receive that change.
Since then the pretty print output looks like this:
...
CC zipl/boot/eckd1b.o
CXX ziomon/ziorep_collapser.o
SED zdev/src/lszdev_usage.c
CC hyptop/sd_cpu_items.o
MV zfcpdump/zfcpdump-initrd
LINK dasdfmt/dasdfmt
...
Add the additional whitespace to all other tools definitions used during
the build process.
Note: This doesn't fix the misaligned indentation for commands like
$(CC_FOR_BUILD) as those inherit the whitespace from the original
command, here $(CC).
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Fix the following warnings:
troff: zkey-ekmfweb.1:455: warning: macro 'APP=LINUX'' not defined
troff: zkey-ekmfweb.1:457: warning: macro 'encvol'.' not defined
A single quote (') at the beginning of ta line is interpreted as macro.
Fix this by starting the line with a dummy character (\&).
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
include the version of dbginfo.sh just used for data collection into our
tar file - so we have the used version in case of data collection problems.
Reviewed-by: Michael Storzer <MSTORZER@de.ibm.com>
Signed-off-by: Joern Siglen <siglen@de.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The `install` Makefile target of the top Makefile has `all` and
`install-recursive` as prerequisites. This leads to the two recursive
Makefile calls `make -C <SUBDIR> all` and `make -C <SUBDIR> install`.
The problem is these two targets try to build the same object files and
this leads to a race condition between these two targets in case of a
parallel build.
Fix this problem by removing the `all` prerequisite from the `install`
target, as it is not needed since all the `install` targets in the
sub-Makefiles already have proper prerequisites.
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
- Instead of always clearing the memory on reipl after the ccw dump has
been taken, check for the special OS_INFO_FLAG_REIPL_CLEAR flag in
os_info flags entry (indicates if sysfs 'clear' attribute has been set
on the panicked system) and trigger diag308 with a proper subcode.
- Get rid of superfluous ipib_info structure in stage2dump.c.
- Collect ipl_pbt constants in boot/ipl.h header.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Acked-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add DIAG308_LOAD_NORMAL diag308 subcode (used by FCP/NVMe normal ipl).
Rename other diag308_subcode and diag308_rc constants to be in sync with
kernel naming.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Introduce new os_info flags entry pointing to the field with bit flags.
The flag OS_INFO_FLAG_REIPL_CLEAR indicates that 'clear' sysfs attribute
has been set on a panicked system.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
- Add os_info_check() function to verify os_info address, magic and
checksum.
- Add os_info_entry_is_valid() function to check whether requested entry
is present and valid.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Acked-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
- Move zipl/boot/error.h to include/boot
- Adjust include statements in zipb/boot and genprotimg/boot
- Remove error.h from tunedasd/src/tunedasd.c as not needed
- Fix tunedasd/src/Makefile
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Make 'struct os_info *os_info' a const to ensure/indicate that no changes
are made to the given structure.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
- Move struct os_info from kdump.h to the new header os_info.h.
- Place os_info.h to include/boot in order to use it in zgetdump
code as well.
- Replace hardcoded value of OS_INFO_CSUM_SIZE with a properly
calculated one.
- Rename os_info_check() of kdump.h to kdump_os_info_check().
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
While calculating real CPU SMT utilization, the SMT speedup factor needs
to be taken into account. Speedup factor depends on machine generations
and variations on workload the machine has. The users should be able to
determine the value according to their needs.
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
By using core utilization, thread utilization, and management
utilization, it is possible to determine how much capacity is left or
how much the real CPU SMT utilization is on lpars. Extending hyptop
with this new field provides useful information.
For more info about real CPU SMT utilization:
https://linux.mainframe.blog/smt_utilization/
Briefly:
ur = real SMT util
uc = core util
ut = thread util
um = *management util
s = **speedup factor
ur = ((uc * per_core_thr_count) - ut) / s + (ut - uc) + um
* management utilization:
logical core time spent on hypervisor instead of logical partition.
** speedup factor:
metric used to calculate the SMT utilization on that logical core. This
value varies depending on the workload and the machine generation due
to hardware optimization level.
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The compiler doesn't fully understand the code block that precedes the
usage of `site` in the condition and thus it thinks it could be
uninitialized. Silence the warning with an explicit initialization.
In function 'get_site_from_pers',
inlined from 'dev_table_get_value' at lszdev.c:1079:10:
lszdev.c:258:20: warning: 'site' may be used uninitialized [-Wmaybe-uninitialized]
258 | if (site == SITE_FALLBACK)
| ^
lszdev.c: In function 'dev_table_get_value':
lszdev.c:234:13: note: 'site' was declared here
234 | int site, i, num = 0;
| ^~~~
Closes: https://github.com/ibm-s390-linux/s390-tools/pull/152
Signed-off-by: Dan Horák <dan@danny.cz>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The compiler doesn't fully understand the code block that precedes the
usage of title_off in the condition and thus it thinks it could be
uninitialized. Silence the warning with an explicit initialization.
CC zipl/src/scan.o
In function ‘sort_bls_fields’,
inlined from ‘scan_bls’ at scan.c:1502:8:
scan.c:874:12: warning: ‘title_off’ may be used uninitialized [-Wmaybe-uninitialized]
874 | if (title_off == 0)
| ^
scan.c: In function ‘scan_bls’:
scan.c:842:16: note: ‘title_off’ was declared here
842 | size_t title_off;
| ^~~~~~~~~
GitHub-ID: https://github.com/ibm-s390-linux/s390-tools/pull/152
Signed-off-by: Dan Horák <dan@danny.cz>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The last commit accidentally deleted the TOOLS_DIR for non-s390x
architectures.
Fixes: de013d2f ("Makefile: add genprotimg to non-s390x architectures target list")
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
`genprotimg` can be useful on non-s390x architectures such as x86 or
arm. Therefore add `genprotimg` to the non-s390x target list.
How to build genprotimg on a non-s390x system (s390x cross-compiler
required)
$ # Build and install /usr/bin/genprotimg
$ make -C genprotimg
$ make install -C genprotimg
$ # Build and install the genprotimg bootloaders
$ make -C genprotimg/boot HOST_ARCH=s390x CROSS_COMPILE=s390x-linux-gnu-
$ make install -C genprotimg/boot HOST_ARCH=s390x CROSS_COMPILE=s390x-linux-gnu-
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
The genprotimg bootloaders are s390x specific, so only build them if the
`HOST_ARCH' is set to s390x.
On x86 one can cross-compile and install the bootloaders as follows:
$ make -C genprotimg/boot HOST_ARCH=s390x CROSS_COMPILE=s390x-linux-gnu-
$ make -C genprotimg/boot install HOST_ARCH=s390x CROSS_COMPILE=s390x-linux-gnu-
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
It's cleaner if the bootloader installation code is located in the
boot/Makefile, rather than the top Makefile.
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Under typical circumstances these sysfs attributes should be available
however if the device happens to be in the process of being removed
without the protection of the ap config file lock, this scenario can
be encountered. In this case, ignore the device and assume it is in
the process of being removed.
Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Since this callout reads sysfs values for the specified mdev, the
ap config file lock should be held to prevent other tools from
making changes to the ap configuration at the same time.
Reviewed-by: Jason J. Herne <jjherne@linux.ibm.com>
Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
`load_wait_psw` is defined in include/boot/s390.h but is implemented in
zipl/boot/libc.c. This results in a dangling definition for s390.h users
other than zipl, due to the missing implementation. Since the function
is only relevant for zipl, move the definition to the corresponding
header file zipl/boot/libc.h
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
include/boot/s390.h relies on s390 specific kernel headers. However,
some tools used this header for non-s390 code (outside of boot-loaders).
To solve this the PSW and PAGE_SIZE definitions are now in separate
header files. All includes for s390.h which are not in boot-loader code
are replaced with one of psw.h or page.h.
This fixes the compilation failure on ppc64le due to conflicting types
for `__vector128`.
Fixes: https://github.com/ibm-s390-linux/s390-tools/issues/151
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Use a minimal assembly snippet to check for linker flags. This has the
advantage that it will work even if only the cross-toolchain is
installed, but not, for example, stdlib.
Using the C snippet, the check runs in a similar error like this:
/usr/bin/s390x-linux-gnu-ld: cannot find crt1.o: No such file or directory
/usr/bin/s390x-linux-gnu-ld: cannot find crti.o: No such file or directory
/usr/bin/s390x-linux-gnu-ld: cannot find -lc: No such file or directory
/usr/bin/s390x-linux-gnu-ld: cannot find crtn.o: No such file or directory
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Using option --by-interface with a non-existent network interface name
results in an unexpected duplicate warning message:
$ lszdev --by-interface xx
Could not open directory /sys/class/net/xx: No such file or directory
Could not open directory /sys/class/net/xx: No such file or directory
lszdev: Could not determine device that provides xx (xx)
Fix this by checking for the existence of the associated /sys/class/net
directory before initiating the associated directory traversal.
Reviewed-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
zdev's --by-node option returns exit code 15 (EXIT_RUNTIME_ERROR) when
the specified device node cannot be found. This is inconsistent with
other selection options --by-path and --by-interface which both return
the more appropriate exit code 3 (EXIT_DEVICE_NOT_FOUND).
Fix this by changing --by-node to also return exit code 3 in case the
specified device node does not exist.
Reviewed-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
While changing the helper script to create the ngdump filesystem,
some lines were left in the script which now cause the zipl
installation to fail:
Run /lib/s390-tools/zipl_helper.prepare-ngdump /dev/disk/by-path/ccw-0.0.6a56-part1 0
Couldn't find disk by PARTUUID.
Error: Script could not determine dump parameters
Remove the superfluous lines to fix this.
Fixes: 41108c98aa ("zipl: move mkfs to ngdump prepare script")
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Do not fail to start the daemon if no crypto counters are supported, as
there is still a use case for the daemon to run, as the user can then
use the 'cpacfstats' tool to evaluate that no counter stats are
available. Previously, the user had to check the syslogs for the reason
why the daemon was not running and the cpacfstats command failed.
Before this change:
$ cpacfstats
cpacfstats: Can't access domain socket file '/run/cpacfstatsd_socket', errno=2 [No such file or directory]
cpacfstats: Maybe cpacfstatsd daemon is not running ???
cpacfstats: Can't connect to daemon
After this change:
$ cpacfstats
des counter: unsupported
aes counter: unsupported
sha counter: unsupported
rng counter: unsupported
ecc counter: unsupported
pai_user : unsupported
pai_kernel : unsupported
Also, it's no good practice to let systemd services fail, because
otherwise the system state will be shown as 'degraded':
$ systemctl status
* a46lp59
State: degraded
Jobs: 0 queued
Failed: 1 units
$ systemctl list-units --failed
UNIT LOAD ACTIVE SUB DESCRIPTION
* cpacfstatsd.service loaded failed failed CPACF statistics collection daemon process for Linux on System z
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Print the name of the section which specifes non-existing image
and/or ramdisk files.
It allows to quickly identify problems after using non-atomic tools
manipulating with bootloader settings.
Signed-off-by: Eduard Shishkin <edward6@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The udev-rules generated with the current version of chzdev command
is missing the configuration label, incase of auto configuration,
resulting in an ineffective configuration logic.
Add the missing configuration start label for autoconfig.
Fixes: 2e89722ef0 ("zdev: make site specific udev-rule for ccw")
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
During the boot, the ZDEV_SITE_ID is derived with the help
of loadparm and will be saved in ZDEV_SITE_ID_FILE, which
will be the used by the udev-rules.
ZDEV_SITE_ID_FILE creation can have a surface of symlink attack
as we are directly using the fopen and fprintf on it. To avoid
this, make sure that we are writing the ZDEV_SITE_ID to a temporary
file, which will then be renamed to ZDEV_SITE_ID_FILE, which will
remove all the existing symlinks associated with the target file.
Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
udev does not allow an empty value for keys when importing output
from an external program. Providing an empty value for any key
invokes a warning during the parsing. Currently, ZDEV_SITE_ID for
fallback sites are not assigned any value. Add an empty double
quotes as the value in case of failover sites.
This modification is tested on udevadm version 253 on fedora38.
Also verify that the ZDEV_SITE_ID is properly written, if not log
the error.
Fixes: c8ad5f57d0 ("zdev: modify zdev_id to read the site_id from loadparm")
Reported-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Replace memory allocation functions malloc() and calloc()
by counterparts provided in libutil.a library. Also remove error
handling when no memory could be allocated as those functions do
not return.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Make the listed changes which are needed to re-use some definitions
by the new zipl-debug(8) tool introduced by the next patch in the
series:
. Add definitions to boot_defs.h:
. a named union disk_bloclkptr (instead of the anonymous one);
. a named structure disk_program_table;
. Remove a 'typedef union disk_blockptr_t' from boot/stage2.h
(cleanup), use the named union in boot_defs.h instead;
. Move the definition of scsi_layout types and the function
get_scsi_layout() from install.c to install.h;
. Move definition of PROGRAM_TABLE_BLOCK_SIZE from bootmap.c to
bootmap.h
Signed-off-by: Eduard Shishkin <edward6@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
There are only two users of the `cleanup` label, so let's replace the
goto statements with the label code. This makes the code easier to read.
Especially since another label will be introduced in the next commit.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This patch adds support for Secure Execution with AP pass-through
support for chzcrypt.
chzcrypt details:
* new command: --se-associate <secret-id> <queue device>
* new command: --se-bind <queue device>
* new command: --se-unbind <queue device>
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This patch adds support for Secure Execution with AP pass-through
support for lszcrypt.
lszcrypt details:
* extension to -b: list AP bus features
* extension to -c: now also valid for queue devices, shows
bind and assoicate state in SE environment;
shows MK states (only for current MKs).
* extension to -V: new column SESTAT within an SE guest, shows text
for the BS bits within an SE environment:
"usable", "bond", "avail", "unuse".
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Autoquiesce is a mechanism that tells Linux to stop issuing I/Os to a
specific DASD after certain events.
Add support for configuring related DASD device attributes
that govern the following aspects of autoquiesce:
aq_mask - Configure which events lead to autoquiesce.
aq_requeue - Configure if autoquiesce will requeue all I/O to blocklayer.
aq_timeouts - Configure the number of timeouts before autoquiesce.
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
The 'clean' build targets can be specified alongside other targets,
which causes an immediate removal of build artifacts. Make 'clean'
targets mutually exclusive to avoid this issue and display an error if
'clean' is used in combination with other targets.
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
A subset of s390 tools can be useful on non-s390x architectures such as
x86 or arm. Limit the build targets for these architectures with
'pvattest' and 'libpv' as the first candidates.
A cross compilation on x86 for s390x will still build the entire package
provided that the HOST_ARCH variable is set properly:
$ make HOST_ARCH=s390x CROSS_COMPILE=s390x-linux-gnu-
Cross compilation on s390x for x86 will limit the build targets as
described:
$ make HOST_ARCH=x86_64 CROSS_COMPILE=x86_64-linux-gnu-
Co-developed-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Introduce `BUILD_ARCH` and `(CC|LINK|...|OBJDUMP)_FOR_BUILD` variables
in order to properly support the build of tools that generate code or
data during the build process. Replace existing variables `HOSTCC` with
`CC_FOR_BUILD` and `HOSTCFLAGS` `CFLAGS_FOR_BUILD`. The Makefile
variables for the `HOST_ARCH` are unchanged.
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
In addition, add the ability that a Makefile that includes `common.mak`
can specify the `HOST_ARCH`. Usage example:
$S390_TOOLS/mytool/Makefile:
``` Makefile
HOST_ARCH := s390x
include ../common.mak
```
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
`pkg-config` is a well established tool and all of our required
libraries do provide .pc files. Therefore let's declare `pkg-config` as
required and use it. In addition, remove now useless code.
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Since GCC12 several warnings like the following are produced in
zipl/boot compile targets:
CC zipl/boot/stage2.o
stage2.c: In function ‘start’:
stage2.c:99:24: warning: array subscript 0 is outside array bounds of ‘struct stage2_descr[0]’ [-Warray-bounds]
99 | stage2_descr = *(struct stage2_descr*)STAGE2_DESC;
This is the same issue as reported for the Kernel [1][2]. There is
currently no sane fix available, therefore simply disable the warning
for the zipl/boot/ targets.
[1] https://lore.kernel.org/lkml/yt9dzgkelelc.fsf@linux.ibm.com/
[2] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=99578
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
In certain storage setups the Release Allocated Space (RAS) command to
free up space on the storage server previously allocated for an ESE DASD
might not work. At the moment dasdfmt will error out if RAS is failing.
This however is not ideal for the default case when a user is expecting
dasdfmt to simply format the disk.
One workaround would be to specify --no-discard to disable RAS
completely. However, a sane default handling that tries to work every
time is more reasonable.
Change the default handling as follows: If an ESE is detected default to
QUICK mode and try RAS. If RAS fails, fall back to the FULL format mode
and display a warning accordingly.
If -M (--mode) QUICK is specified explicitly dasdfmt will still error
out on a failing RAS. A combination with --no-discard will still allow
for a QUICK format on an ESE DASD in that case, if desired.
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
`od` in contrast to `xxd` uses the system endianness for displying the
hexdump by default which leads to invalid results on little endian
systems.
Use the `--endian=big` option to fix the endianness problem.
Fixes: 3cc0b4cd ("pvattest/tools: remove xxd dependency from scripts")
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
The script uses bashisms (e.g. `local` keyword) therefore make sure that
bash is used by setting the shebang line to `#!/bin/bash`.
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
icastats is accounted by user and does cover root only today
adding the --all will collect stats for all users
Reported-by: Ingo Franzki <ifranzki@de.ibm.com>
Reviewed-by: Ingo Franzki <ifranzki@de.ibm.com>
Signed-off-by: Joern Siglen <siglen@de.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
For dasd devices, we need to enable the device before we can use it.
Add the required dasd device to the kernel commandline when installing
ngdump to a dasd device.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
The current code first assembles the ngdump init ramdisk, and creates
the filesystem on the dump disk afterwards. ngdump uses uuids to mount
the dump device. Because the filesystem uuid is changing with the final
mkfs, ngdump has to use the partuuid of the device. This does work for
nvme, but not for dasds. Another problem is that dryrun likely wouldn't
work if there's no partition table on the dump device. To fix these
issues, move the mkfs to the ngdump helper script so we can use the
filesystem uuid. When --dryrun is specified the script passes /dev/null
as ngdump device to make mkinitramfs happy. As the initramdisk is never
used in this case, this shouldn't be a problem.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
CCW and LD-IPL records cannot be used at the same time for dumps because
CCW dump uses the standalone dumper, while LD-IPL uses ngdump. The first
one writes data to the raw disk without any filesystem, while the second
one uses an ext filesystem. Therefore we need a way to tell zipl which
kind of dumper it should install, as both cannot be installed at the
same time. The device given is the same for both types, so we cannot use
this to decide which type to install. Therefore add a '--ldipl-dump' option
so the user can decide which type of dump to use.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Eduard Shishkin <edward6@linux.ibm.com>
Acked-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Add the following options to dumpconf so that LDIPL ECKD devices
can be configured for dumping:
br_chr: (optional) location of boot record
device: ccw device
bootprog: boot program selector
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
In order to allow installing only a list-directed ipl entry, remove
the last-table/number-of-tables logic which always required a legacy
program table. With the new code there's no longer a loop in
prepare_bootloader() which requires a certain start index or order
of tables.
Signed-off-by: Eduard Shishkin <edward6@linux.ibm.com>
Acked-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Instead of depending on array index to decide whether we
did already the preparation work for installing the bootloader,
add an explicit skip_prepare flag to struct install_set.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Eduard Shishkin <edward6@linux.ibm.com>
Acked-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
In preparation of decoupling the program table position from
the block pointer format, rename:
PROGRAM_TABLE_0 to LEGACY_BLKPTR_FORMAT_ID
PRAGRAM_TABLE_1 to BLKPTR_FORMAT_ID
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
To make the code easier to maintain and prepare for ECKD LD-IPL,
split up install_bootloader() into two functions: One which is used
for IPL, and one for dump partitions.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
The relative subdirectory path of a build target is determined via a
separate shell command that issues 'cd' and 'pwd'. Spawning a separate
shell is very costly and can lead to extremely slow builds in some
circumstances.
Replace the shell command with the make built-in command 'realpath' to
accomplish the same result more efficiently.
Tested-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Related Valgrind output:
==1073934== 241,722,000 bytes in 30 blocks are definitely lost in loss record 2 of 2
==1073934== at 0x484417C: malloc (in /usr/libexec/valgrind/vgpreload_memcheck-s390x-linux.so)
==1073934== by 0x1006B8D: misc_malloc (misc.c:33)
==1073934== by 0x1006B8D: misc_read_file (misc.c:150)
==1073934== by 0x100DACD: check_common_ipl_data (job.c:774)
==1073934== by 0x100FE2F: check_job_ipl_data (job.c:827)
==1073934== by 0x100FE2F: check_job_menu_data (job.c:999)
==1073934== by 0x100FE2F: check_job_data (job.c:1139)
==1073934== by 0x100FE2F: job_get (job.c:2011)
==1073934== by 0x1006335: main (zipl.c:141)
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Acked-by: Eduard Shishkin <edward6@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Since SMT is being used by default on z systems, hyptop should show
thread utilization by default on both system and system list window.
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Valgrind finding:
==1083976== 19 bytes in 1 blocks are definitely lost in loss record 1 of 1
==1083976== at 0x484417C: malloc (in /usr/libexec/valgrind/vgpreload_memcheck-s390x-linux.so)
==1083976== by 0x48F3C97: __vasprintf_internal (vasprintf.c:71)
==1083976== by 0x1006861: vasprintf (stdio2.h:218)
==1083976== by 0x1006861: misc_asprintf (misc.c:49)
==1083976== by 0x100C7E1: scan_update_bls_path (scan.c:1874)
==1083976== by 0x100FF4B: get_job_from_config_file (job.c:1901)
==1083976== by 0x100FF4B: job_get (job.c:1997)
==1083976== by 0x1006335: main (zipl.c:141)
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Before commit 5fb6434548 ("zipl: add get_common_components() and
finalize_common_address_data()") the default kernel parmline was only
overwritten if a parmline was specified. After the commit it was always
overwritten, even if no parmline was specified. Let's change this
behavior back by adding a NULL-pointer check. For dump types this change
changes the behavior before commit 5fb6434548 ("zipl: add
get_common_components() and finalize_common_address_data()").
Fixes: 5fb6434548 ("zipl: add get_common_components() and finalize_common_address_data()")
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Linux kernel commits
a029a4eab39 ("s390/cpumf: Allow concurrent access for CPU Measurement Counter Facility")
453380318ed ("s390/cpumf: Allow multiple processes to access /dev/hwc")
removed this restriction. Both commits are included in linux 5.16.
Therefore remove the restriction in the man page.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
OpenSSL function i2d_ECDSA_SIG() returns a negative value in case of
an error, so check the returned length for <= zero to detect an error.
Reported-by: Holger Dengler <dengler@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The provider functions OSSL_FUNC_keymgmt_import_types() and
OSSL_FUNC_keymgmt_export_types() do not get the provider context passed.
However, the implementation of these functions in the secure key provider
need the provider context to pass the call to the default provider
and append some of its own types to the result.
Up to now, the provider context was obtained using a global variable
holding the secure key provider handle. This may not be save if multiple
instances of the provider exist.
Just recently OpenSSL added support for an extended form of these
functions, namely OSSL_FUNC_keymgmt_import_types_ex() and
OSSL_FUNC_keymgmt_export_types_ex(), that get the provider context passed
as argument. Make use of these new functions, if compiled against an
OpenSSL version that supports them. For older OpenSSL versions still use
the global variable as before.
See OpenSSL commit 5e3b84505e
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
If system configuration contains zfcp-attached SCSI devices of Peripheral
Device Type disk, but without block device, e.g. because the storage reports
Peripheral Qualifier 1 in INQUIRY, ziorep_config tool issue the
following type of errors during generation of .config file from .cfg
file:
$ ziorep_config -I -i test.cfg
Unpacking configuration ...Done.
Use of uninitialized value in subroutine entry at /usr/sbin/ziorep_config line 36.
Use of uninitialized value in subroutine entry at /usr/sbin/ziorep_config line 36.
Use of uninitialized value in subroutine entry at /usr/sbin/ziorep_config line 54.
Use of uninitialized value in subroutine entry at /usr/sbin/ziorep_config line 135.
...
Such errors can also be seen during printing of adapter, device and map
reports:
$ ziorep_config -ADM -i test.cfg
Unpacking configuration ...Done.
Use of uninitialized value in subroutine entry at /usr/sbin/ziorep_config line 36.
Use of uninitialized value in subroutine entry at /usr/sbin/ziorep_config line 36.
Use of uninitialized value in subroutine entry at /usr/sbin/ziorep_config line 54.
Use of uninitialized value in subroutine entry at /usr/sbin/ziorep_config line 135.
...
This is because ziorep_config reads block device parameters from
non-existent block device subdirectory. And therefore ziorep_config
leaves block device major:minor number column empty in .config file
instead of filling it with 0:0 preset value afterwards.
As a consequence, ziorep_traffic tool, which is using .config file to
get information about devices, reports the following error:
$ ziorep_traffic test
Extracting config data...done
ziorep_traffic: Could not parse line 1 - configuration file broken?
To fix this, skip reading the block device parameters for such
devices, and use the preset values that have been set before
instead.
Signed-off-by: Fedor Loshakov <loshakov@linux.ibm.com>
Suggested-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The value of "generic/dev" exists and can be retrieved directly under
the SCSI device directory, not under the disk block device subdirectory,
where the global variable $c_src points to after
$c_src = $devices{$hctl}{dev}; command.
So move the sg_mm retrieval before the block device parameters
retrieval.
Signed-off-by: Fedor Loshakov <loshakov@linux.ibm.com>
Suggested-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
For a slightly easier development loop add a pseudo compilation of the
zfcpdbf Perl script. This will run the Perl interpreter in syntax-check
mode:
-c causes Perl to check the syntax of the program and then exit
without executing it. Actually, it will execute any "BEGIN",
"UNITCHECK", or "CHECK" blocks and any "use" statements: these are
considered as occurring outside the execution of your program.
"INIT" and "END" blocks, however, will be skipped.
Additionally add the `-w` switch when the Make variable `W` is `1`. This
will print additional warnings about dubious constructs (according to
Perl).
So this pseudo compilation only happens whenever the script is changed
during development create a file `.zfcpdbf.ct` as a result so we can
describe the relationship and dependency in Make. This file can be ignored
otherwise.
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
changes in opencryptoki setup do require some modifications:
- "pkcsconf -mlist" does no longer work in a combined format
- config files have changed
- ep11info was not yet collected
Signed-off-by: Joern Siglen <siglen@de.ibm.com>
Reviewed-by: Ingo Franzki <ifranzki@de.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
With the introduction of zdev for device configuration in v1.33.0,
it used a hardcoded "/" to refer to the root-fs.
Dracut has its own mechanism to find the root file system and to walk its
device dependencies.
Mkdumprd also has its own mechanism to interpret the kdump target
and invokes dracut so that dracut only considers arguments from mkdumprd
without any root-fs dracut would default to [--no-hostonly-default-device].
Use the dracut mechanism to walk device dependencies and individually
have chzdev treat each leaf-node in the dependency tree.
See also https://github.com/dracutdevs/dracut commit
83e0dc7a3dca ("Add for_each_host_dev_and_slaves for device only checking").
This enables the use of dracut options such as --add-device or
--mount used in turn by mkdumprd.
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The function show_devices_argv() iterates over all remaining
arguments. Each argument may specify a single device or a list of
sub-devices. Use a separate index for the inner sub-device loop. This
fixes a bug, that not all or wrong arguments are processed.
Also terminate the outer arguments loop based on the number of
remaining arguments.
Signed-off-by: Holger Dengler <dengler@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The tools lszcrypt provides filter options for card types. Use these
options not only for devices (cards), but also for sub-devices
(domains).
Signed-off-by: Holger Dengler <dengler@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The CEX8 card has in CCA mode a new capability 'stateless
hardware filtering support' which is now displayed as
'H' bit in the FUNCTIONS column and with the -c option.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The current code has different paths to construct the kernel parameters
depending on whether it's a dump kernel or a normal kernel. This would
require adding special handling to get_common_component(), because for
normal kernels the parmline is already set, contrary to dump kernels,
where the command line is constructed later.
To make the code simpler and fix a bug where the default command line no
longer works, move the dump command line processing to an earlier stage.
Also rename the old function to make the function name match what it is
actually doing.
Fixes: 5fb6434548 ("zipl: add get_common_components() and finalize_common_address_data()")
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This avoids exporting explicit settings if it's the default anyway.
I.e. avoid the last line in the example below:
$ chzdev --export - --active --type --all
[active zfcp-lun 0.0.1941:0x500507630904d...:0x4055408f00000000]
scsi_dev/queue_depth=32
Suggested-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Currently, each generated loader binary is linked into one data.o object
file which is then linked against boot.o. The data.o file is also used
to generate the data.h header file using nm, which will contain all
symbols required by zipl.
The linking process is somewhat depended on the directory, as the symbol
names are derived from the file names of the input files, which is the
default behavior of the linker. The file name in this case being the
entire path.
Examples for the current situation (starting from root dir in each case):
$ cd zipl/boot && make eckd0_cdl.bin
$ cc -no-pie -static -nostdlib -Wl,--relocatable -Wl,--format,binary -o data.o eckd0_cdl.bin
$ nm data.o
0000000000000018 D _binary_eckd0_cdl_bin_end
0000000000000018 A _binary_eckd0_cdl_bin_size
0000000000000000 D _binary_eckd0_cdl_bin_start
$ make -C zipl/boot eckd0_cdl.bin
$ cc -no-pie -static -nostdlib -Wl,--relocatable -Wl,--format,binary -o data.o zipl/boot/eckd0_cdl.bin
$ nm data.o
000000000000018 D _binary_zipl_boot_eckd0_cdl_bin_end
000000000000018 A _binary_zipl_boot_eckd0_cdl_bin_size
000000000000000 D _binary_zipl_boot_eckd0_cdl_bin_start
The example above shows that the entire path would end up in the symbol
name if specified that way.
To make this more robust, future proof, and get more control of the
resulting symbol names, use '.incbin' and some macros for embedding the
loader binary files. This also reduces the linker step and the
generation of the data.h header file.
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Co-developed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Use a linker script instead of a linker flags for the layout. While at
it, use common naming `_start` for entry. This change allows us to
simplify the Makefile by using the linker option `-T` for all
bootloaders.
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The stage3b loader memory layout must not be larger than 0x10000 bytes.
Let's check this in the linker script.
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
+ the input section names `.text.init` and `.text.start` aren't
ambiguous, therefore there is no reason so specify a file name
+ discard `.interp` section since no loader is used
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Instead of maintaining an include list, use an exclude list (if
neccessary). This simplifies the `objcopy` calls a lot, and it's
possible because `objcopy -O binary` only includes the memory dump of
the contents of the input object file. [1] This means that sections like
for debug information that do not occupy memory during the process
execution are discarded by design. [2]
In addition, if we do not want a particular ELF section, we can list it
in the discard section of the linker script.
[1] https://man7.org/linux/man-pages/man1/objcopy.1.html
[2] https://man7.org/linux/man-pages/man5/elf.5.html
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This disables the following warning `ld: warning: stag3a.elf has a LOAD
segment with RWX permissions` for newer linker. This changes nothing in
functionality for the bootloaders, since only the binaries and not the
ELF files are actually used.
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Normally, `gcc` takes care of adding the `GNU_STACK` marking except for
assembly code. Therefore, let's add the marking manually. Discard the
`.note.GNU-stack` section in the linker script since it's just a
"message" from the compiler to the linker. This fixes the linker
warning:
ld: warning: entry.o: missing .note.GNU-stack section implies executable stack
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Use linker script for all bootloaders instead of having the load
addresses of the bootloaders hard-coded in the Makefile. This allows us
to simplify the Makefile and it fixes the dependency tracking for the
bootloaders *0.bin, *1.bin, and *1b.bin.
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This allows the reuse of the macro in the next patch. In order to match
the naming scheme rename `STAGE1B_LOAD_ADDR` to `STAGE1B_LOAD_ADDRESS`.
Acked-by: Eduard Shishkin <edward6@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Instead of maintaining an include list, use an exclude list (if
neccessary). This simplifies the `objcopy` calls a lot, and it's
possible because `objcopy -O binary` only includes the memory dump of
the contents of the input object file. [1] This means that sections like
for debug information that do not occupy memory during the process
execution are discarded by design. [2]
In addition, if we do not want a particular ELF section, we can list it
in the discard section of the linker script.
[1] https://man7.org/linux/man-pages/man1/objcopy.1.html
[2] https://man7.org/linux/man-pages/man5/elf.5.html
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This disables the following warning `ld: warning: stage3.exec has a LOAD
segment with RWX permissions` for newer linker. This changes nothing in
functionality for the zipl bootloaders, since only the binaries and not
the ELF files are actually used.
Acked-by: Eduard Shishkin <edward6@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Normally, `gcc` takes care of adding the `GNU_STACK` marking except for
assembly code. Therefore, let's add the marking manually. Discard the
`.note.GNU-stack` section in the linker script since it's just a
"message" from the compiler to the linker. This fixes the linker
warning:
ld: warning: entry.o: missing .note.GNU-stack section implies executable stack
Acked-by: Eduard Shishkin <edward6@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The ELF section `.eh_frame` is used for frame unwinding during, for
example, exception handling and the section `.interp` is used by the
program interpreter. [1] Since no frame unwinding nor a program
interpreter is used for the bootloaders we can discard these input
section.
The content of the (exec|bin) files don't change after this change.
[1] https://refspecs.linuxfoundation.org/LSB_1.2.0/gLSB/specialsections.html
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add support to chreipl/lsreipl to show and reconfigure ipl parameters
for list-directed IPL from ECKD DASD.
Parameters accepted:
device - ccw device id
bootprog - Boot Prog Selector
loadparm - Load parameters
brchr - location of bootrecord in cylinder/head/record format.
clear - clear memory before loading
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
With parameter OSSL_ASYM_CIPHER_PARAM_IMPLICIT_REJECTION one can enable or
disable the implicit rejection mechanism for RSA PKCS#1 v1.5 decryption.
For the default provider, this is enabled by default.
We do not support implicit rejection so far, so disable it for the
default provider operation context when the key contains an RSA secure key,
and reject to set it to anything else then 0 (disabled).
See OpenSSL commit 5ab3ec1bb1
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Since OpenSSL 3.1 a new RSA-PSS salt length constant exists to select
the maximum possible salt length based on the RSA-PSS parameters and the
digest used: OSSL_PKEY_RSA_PSS_SALT_LEN_AUTO_DIGEST_MAX
This is the default salt length when no other salt length is set by
the caller.
In contrast to OSSL_PKEY_RSA_PSS_SALT_LEN_MAX, OSSL_PKEY_RSA_PSS_SALT_LEN_AUTO_DIGEST_MAX
also ensures that the resulting salt length is not larger than the used
digest size. The salt length calculated with OSSL_PKEY_RSA_PSS_SALT_LEN_MAX
may be larger than the digest size, dependent on the RSA-PSS parameters.
FIPS 186-4 section 5 "The RSA Digital Signature Algorithm", subsection
5.5 "PKCS #1" says: "For RSASSA-PSS […] the length (in bytes) of the
salt (sLen) shall satisfy 0 <= sLen <= hLen, where hLen is the length of
the hash function output block (in bytes)."
See OpenSSL commit 6c73ca4a2f
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
With parameter OSSL_SIGNATURE_PARAM_NONCE_TYPE one can choose to generate
a deterministic signature, i.e. using a deterministic nonce K.
We do not support that so far, so reject to set the nonce type to
anything other than 0 (random nonce K).
See OpenSSL commit f3090fc710
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Fix the improper order of resource releasing resulted in failed umount
Do umount after closing (not before)
Fixes: f7d2339 (zipl: List-Directed IPL from ECKD DASD)
Reported-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Tested-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Eduard Shishkin <edward6@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
The library libvmdump is written in C++ and uses exception handling
and class inheritance. The tools vmur and vmconnect are compiled using
the C++ compiler for linking with the libvmdump library.
With integration of vmdump file support into the zgetdump tool and
the removal of vmur vmdump file conversion support there is no need
anymore the vmconvert tool.
With removal of the tool vmconvert, the libvmdump library written in C++
has no more user and can be deleted.
Remove the vmconvert command from the zgetdump man page.
Remove the directories libvmdump and vmconvert and adjust the Makefile.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Suggested-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Remove option -c for implicit dump file conversion from vmdump format
to lkcd format. If option -c is specified, an error message
is printed and the program terminates. A hint to the new conversion
tool zgetdump is shown. Option -c is not listed in the help text.
The man page is also updated to reflect this change.
With zgetdump tool now supporting vmdump file format there is no need to
convert a vmdump file while extracting it from the reader device.
Use commands
1. vmur rec <spool-id> VMDUMP_FILE
2. zgetdump VMDUMP_FILE ELF_FILE
to extract a vmdump file from the reader and convert it to elf format.
Note to Maintainer:
The rename of file vmur.cpp to vmur.c triggers the pre-commit
checking of git-format-clang. This checking fails. This is intended.
The patch shows the changes for this line item.
The pre-commit checking fails on many, many changes not touched
for changed by this patch.
The pre-commit failure should be fixed with a follow-on patch.
Suggested-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Add support for vmdump 64big format to the zgetdump utility.
The result is an elf file suitable for tool crash.
This patch adds file dfi_vmdump.c to handle conversion from
z/VM vmdump format to the internal memory representation of this tool.
Therefore both output formats elf and s390 are supported as target
of the conversion.
The vmdump file formats 32bit and 64bit are not supported anymore.
They have been obsolete since CP version 5.1 (end of service since
30-Sep-2009).
Vector register set is not part of a vmdump file and can not be
displayed.
Output before:
# zgetdump ~/vmdump-0383
zgetdump: No valid dump found on "/root/vmdump-0383"
#
Output after:
# ./zgetdump ~/vmdump-0383 ~/vmdump-0383.elf
Format Info:
Source: vmdump
Target: elf
Copying dump:
00000000 / 00000379 MB
00000379 / 00000379 MB
Success: Dump has been copied
# file ~/vmdump-0383.elf
/root/vmdump-0383.elf: ELF 64-bit MSB core file, IBM S/390, version 1 \
.... (SYSV), SVR4-style, from 'vmlinux'
#
# ./zgetdump -i ~/vmdump-0383
General dump info:
Dump format........: vmdump
Version............: 2
UTS node name......: s8360046.lnxne.boe
UTS kernel release.: 6.1.0-rc2-d-perf+
UTS kernel version.: #1 SMP Fri Oct 28 09:42:13 CEST 2022
System arch........: s390x (64 bit)
CPU count (online).: 2
CPU count (real)...: 2
Dump memory range..: 2048 MB
Memory map:
0000000000000000 - 000000007fffffff (2048 MB)
#
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
The `.check_dep_zgetdump` file is used to cache the result of the
dependency checks and should not be used as input for linking or
anything else. Let's add it as dependency for the objects file. This
shouldn't cause any problems since the Makefile rule for object files is
defined in `common.mak` as follows:
%.o: %.c
$(CC) $(ALL_CPPFLAGS) $(ALL_CFLAGS) -c $< -o $@
Fixes: https://github.com/ibm-s390-linux/s390-tools/issues/147
Fixes: 8d8d5e9746 ("zdump: Fix Makefile dependencies")
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Enforce that the first glib.h include is done via glib-helper.h for libpv
so that glib version checks are in place.
Change zdump and pvattest such that they never include glibstuff before
libpv/glib-helper.h
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Since coreutils v9.1 commit 8f31074cb ("chown: warn about USER.GROUP")
chown utility now warns about using of wrong separator for USER and
GROUP options. This leads to warnings during intall step in ziomon:
$ make install
INSTALL ziomon
SED ziomon/install
chown: warning: '.' should be ':': ‘root.root’
SED ziomon/install
chown: warning: '.' should be ':': ‘root.root’
SED ziomon/install
chown: warning: '.' should be ':': ‘root.root’
To fix those warnings use ':' as separator instead of '.'. With this
patch applied those warnings are no longer present.
Signed-off-by: Fedor Loshakov <loshakov@linux.ibm.com>
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
As on space problems the packing may fail, incomplete tgz are send.
Today no evidence for this is in dbginfo.log, packed upfront into the tgz.
This update helps to identify space related corruption of tgz files.
Reviewed-by: Mario Held <mario.held@de.ibm.com>
Signed-off-by: Joern Siglen <siglen@de.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
When the kernel is build with CONFIG_NVME_MULTIPATH enabled and an NVMe
where the driver exposes its controller separately is used, chreipl node
on a mount point of the NVMe fails. The failure occurs because chreipl
tries to get the function_id from the NVMe's nvmeXnY block device via
the path '/sys/block/nvmeXnY/device/device/function_id' which does not
exist.
The underlying problem is that with NVMe multipath support the PCI
function is not associated directly with a particular NVMe namespace but
instead with the entire NVMe device which may host multiple NVMe
namespaces. The correct way to get from the block device to the
underlying PCI device and its function ID is then to extract the device
name i.e. the 'nvmeX' part from 'nvmeXnY' and use that to get the
function ID via '/sys/class/nvme/nvme<X>/device/function_id'.
Fixes: 0472b5ea5c ("ipl-tools: Add nvme device support to lsreipl/chreipl")
Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
xxd has vim-common as a dependency. We can avoid that by using od
instead which is from coreutils.
While at it, add the require_command function from the
pvattest-info script to the pvextract-hdr script and use it.
Suggested-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Fix issue in the lszdev command where column names if using the --pairs
command line switch can contain characters that are not allowed to be
used as variable names in a shell environment.
Replace bad characters in column names by an underscore if the --shell
command line switch is specified along with the --pairs switch.
The additional --shell switch mimics what is already available in the
lsblk command and thus it shall be used along with the --pairs switch.
Signed-off-by: Daniel S. Haischt <modean@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
The proc_sum_t struct is defined with the packed attribute and
produces the following compile warning:
mon_procd.c: In function ‘read_cpu’:
mon_procd.c:351:27: warning: taking address of packed member of ‘struct proc_sum_t’ may result in an unaligned pointer value [-Waddress-of-packed-member]
351 | cal_cpu(&cpudata, &proc_sum.cpu);
| ^~~~~~~~~~~~~
Silence the warning with -Wno-address-of-packed-member compile flag
since the struct is required to be as is.
Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
The struct scsi_dump_sb is defined with the __packed attribute and
produces the following compile warning in zfcpdump:
zfcpdump_part.c: In function ‘csum_update’:
zfcpdump_part.c:125:41: warning: taking address of packed member of ‘struct scsi_dump_sb’ may result in an unaligned pointer value [-Waddress-of-packed-member]
125 | dump_sb.csum_size, &dump_sb.csum)) {
| ^~~~~~~~~~~~~
However, all members are of the same size and the __packed attribute is
unnecessary. Remove the attribute to get rid of the warning.
Add assertion to ensure correct size of the struct during compile time.
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
The 'unistd.h' header was missing. Under some circumstances the
-D_GNU_SOURCE gcc flag does not trigger including that file.
Therefore, explicitly include this file here.
Fixes: e1aec24e84 ("libutil: introduce util_lockfile")
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
mdevctl has been updated to use /usr/lib/mdevctl/scripts.d/callouts/
instead of /etc/mdevctl.d/scripts.d/callouts/. The /etc location
is considered deprecated, meaning mdevctl will also look at that
location for now but might eventually stop looking in /etc for
callout scripts.
Based on that, update the installation location for the ap-check
callout. However, because older versions of mdevctl will still
only look in /etc, let's also put a wrapper script in /etc for now
to provide backward compatibility, and plan to remove it at a
later time.
Link: df6bb57429
Fixes: https://github.com/ibm-s390-linux/s390-tools/issues/139
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Commit ae7217806b ("common.mak: remove `LINK` and `LINKXX`") changed
the LINK and LINKXX definition to ensure that the same compiler is used
for compilation and linking when specified with CC= (or CXX=
respectively) on the commandline.
However, the commit also removed the pretty print for both commands. Add
the pretty print back in and use the already defined $(CC) and $(CXX)
variables to preserve the original change.
Fixes: ae7217806b ("common.mak: remove `LINK` and `LINKXX`")
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Check the dump provided sizes for reasonableness. This avoids that a
corrupted dump leads to allocation of large buffers on the heap.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Verify that the size is large enough before doing the mmap. Otherwise
this can result in a SIGBUS signal if there is an attempt to access a
page that lies beyond the end of the mapped file (see `man 2 mmap`).
Fixes: 8fa1b5a00b ("zdump: dfi: add support to read Protected Virtualization dumps")
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Corrupted dumps might have invalid page states. Therefore, let's convert
the assertions into errors.
Fixes: 8fa1b5a00b ("zdump: dfi: add support to read Protected Virtualization dumps")
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Make zipl tool prepare ECKD DASD for booting by different IPL
programs (with the same boot record installed).
Besides standard CCW-type IPL, user gets an ability to trigger
(with the same boot record installed!) List-Directed IPL. This
allows to use the feature of secure boot from ECKD DASD (which
is not available for CCW-type IPL).
When using the old boot interfaces, the usual CCW-type IPL is
triggered for DASD. Also for compatibility reasons zipl(8) tool
is modified to create and install one, or two "similar" program
tables per boot partition, depending on job and disk type. The
"similar" program tables differ only in block pointers format.
The old IPL programs (CCW-type IPL) use program table based on the
old format.
All program tables are packed to the same bootmap file. Their
order and logical offsets in the file are not significant (not
used by anyone).
The picture below shows which program table is used for IPL of
specified type from disk of specified type. Here "0" and "1" are
identifiers of program tables based on the old and new block
pointers format respectively. E.g. program table "0" is used for
CCW-type IPL from ECKD DASD. LD-IPL from DASD FBA is unsupported
(respectively, only one program table "0" is used), etc.
CCW-IPL LD-IPL
SCSI X 0
DASD FBA 0 X
ECKD DASD LDL 0 X
ECKD DASD CDL 0 1
Signed-off-by: Eduard Shishkin <edward6@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add an option to tunedasd to trigger a copy pair swap using the appropriate
ioctl for DASD devices.
-s, --copy-pair-swap COPY_PAIR
This command requires a comma separated pair of primary,secondary to be
specified. In case of success the old secondary will become the new primary
device and the old primary will become a secondary device.
Example:
tunedasd /dev/dasda -s 0.0.9700,0.0.9740
This will set the old secondary device 0.0.9740 as the new primary.
The old primary device 0.0.9700 will automatically become a secondary
device.
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
In case of an error the ioctl macro only returns errno to the calling
function.
This misses positive returncodes from ioctls.
Change the macro to also return positive return codes.
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The DASD device driver has a new attribute copy_pair to make storage
server copy pairs known to the driver.
Add this attribute to zdev.
Usage example:
Add two copy pairs 1000,2000 and 1000,3000 to a DASD device 1000
$ chzdev dasd 1000 copy_pairs=1000,2000 copy_pairs=1000,3000
or
$ chzdev dasd 1000 copy_pairs="1000,2000 1000,3000"
To add a third copy pair later on:
$ chzdev dasd 1000 copy_pairs=1000,4000
To remove all copy pairs from the device 1000:
$ chzdev dasd 1000 -r copy_pairs
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add an option -P|--copy-pairs to show all DASD devices with copy
relations set up in the system and their roles.
The output looks like:
# ./s390-tools/zconf/lsdasd -h
[...]
-P|--copy-pairs
Print information about copy pairs.
# ./s390-tools/zconf/lsdasd -P
Bus-ID Role Name Paired devices
================================================================================
0.0.9700 primary dasdd 0.0.9740,0.0.9743,0.0.9744,0.0.9745
0.0.9740 secondary 0.0.9700
0.0.9701 primary dasdf 0.0.9741
0.0.9741 secondary 0.0.9701
0.0.9702 primary dasdh 0.0.9742
0.0.9742 secondary 0.0.9702
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Adds util_lockfile_example.c, which can be used to sample
util_lockfile support.
To acquire a lock using a parent PID (e.g. your shell instance):
util_lockfile_exmample -f <path> -l <retries>
To release the lock using the parent PID:
util_lockfile_example -f <path> -r
To acquire the lock, sleep briefly, and then release the lock
using the PID of the util_lockfile_example process:
util_lockfile_example -f <path> -L <retries>
In each example, the <path> is the location of the desired lockfile
and <retries> is the number of times to retry acquiring the lock
if it fails.
GitHub-ID: https://github.com/ibm-s390-linux/s390-tools/issues/142
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Implement simple file-locking routines that use process PIDs for stale
lock detection. The implementation is meant to be a simplified subset of
what liblockfile was previously being used for by libap, allowing the
external dependency to be removed.
This initial implementation provides a series of functions that allow for
creating/release file locks using either the current process PID or the
PID of the current process parent. When creating a file lock, first a
temporary file is created and the appropriate PID (either this process
PID or the parent process PID) is placed in the file to specify the owner
of the lock. Then an attempt is made to link that file to the desired
file location; if this succeeds, the lock is now held on behalf of the
specified PID. If it fails, this implies the file already exists
(meaning the lock is already held). In this case, stale lock detection
is performed by reading the PID from the file and ensuring that the
associated process still exists -- if it does not, then the lock is
presumed stale and destroyed. If the process still exists, then either
the lock request fails or the caller will sleep and retry, depending on
an optional retry setting.
A lock remains valid until either 1) it is released via the corresponding
util_lockfile function, which will delete the corresponding file 2) the
associated PID no longer exists, which leaves the file in-place but will
cause it to be destroyed the next time a different process attempts to
lock that file or 3) the file is directly removed (e.g. rm).
A typical usecase for such support would be to provide a means for
multiple invocations of the same (or different) tools to ensure that they
do not access the same shared resource simultaneously. For example,
ap-check, chzdev and lszdev all have a need to view and/or modify the AP
and vfio-ap configuration files; util_lockfile can be used to ensure that
only one instance of any of these utilities do that at a time by ensuring
they all use the same lockfile.
Additionally, providing the ability to specify the parent PID rather than
the current PID allows for a general purpose tool (like mdevctl) to
invoke a sub-program (ap-check) to acquire and release a lockfile as
necssary while allowing stale lock detection to be controlled by that
parent PID, allowing the lock to remain held over multiple sub-program
invocations.
Note that this implementation is sufficient for our current usage (e.g.
lockfiles placed in tmpfs) but does not take into consideration things
like NFS, which a more complete lockfile solution like liblockfile does.
GitHub-ID: https://github.com/ibm-s390-linux/s390-tools/issues/142
Suggested-by: Luca BRUNO <luca.bruno@coreos.com>
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Set up the secure_boot_supported global variable at the
function bootmap_create() instead of bootmap_create_device()
to make sure that the secure boot status is checked for all
relevant jobs.
Fixes: 7b369318dd ("zipl: check for secure boot once")
Signed-off-by: Eduard Shishkin <edward6@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Sometimes dumping a virtual machine from the outside is the only way to
get the data that is needed. This can be the case if a dumping mechanism
like kdump hasn't been configured or data needs to be fetched at a
specific point. Dumping a protected guest from the outside without help
from FW/HW doesn't yield sufficient data to be useful. Hence we have
introduced Protected Virtualization (PV) dump support - also named
confidential dump support.
The confidential dump support works by integrating the firmware into the
dump process. New Ultravisor calls (UVC) are used to initiate the dump
process, dump CPU data, dump memory state and lastly complete the dump
process. The guest's data is fully encrypted and can only be decrypted
by the entity that owns the customer communication key (CCK) for the
dumped guest. The output format is very similar the normal s390 vmcore
ELF format, it's only enriched by new sections where the returned data
from the UVC "Complete Configuration Dump" and the UVC "Dump
Configuration Storage State" is stored. The encrypted CPU data is stored
in a new note type `NT_S390_PV_CPU_DATA`. The old note types do still
exists but without any confidential data stored. The memory data is
stored in the LOAD segment as usual but for PV dumps it's fully AES-XTS
encrypted.
This commit adds support for reading/decrypting PV guest dumps to
zgetdump by introducing a new DFI input module (`dfi_pv_elf.c`). For
specifying the customer communication key a new command line option
`--key` is added.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The functionalities of libpv are used in the next patch. Libpv itself
requires glib2 and libcrypto.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Consolidate error reporting to make sure that error messages are used
consistently. In addition, don't call `zg_exit()` directly, but instead
return the value 1 in `main()`.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Acked-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Prevent double free/close that happens in get_multipath_status()
when the output of "dmsetup status XXX" is empty
Fixes: 599b141 ("zipl: Rewrite helper script in C")
Signed-off-by: Eduard Shishkin <edward6@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Adapt the wrappers `zg_alloc`, `zg_realloc` and `zg_ioctl` to match the
signatures used by `calloc`, `realloc` and `ioctl`.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
lshwc displays counter values extracted from the /dev/hwctr device.
The counter values are retrieved using a loop and incremented instead
of just displayed on output.
This leads to the situation where a counter is incremented in large
numbers while the counter triggering program is active. When this
program terminates, the counter should not increase but remain steady.
This is not the case as this example shows:
# lshwc -i 2 -l90 -a :a | fgrep Total | \
awk -F ',' '{print $2 "," $152 "," $157}'
Report time and values of DFLT_ACCESS and DFLT_CC counters
sleep 10
# DFLTCC=1 python3 -c "import zlib; zlib.compress(b'A'*6000000000);
Increment counter DFLT_ACCESS and DFLT_CC, runs about 45 seconds
Output before:
15:24:20,0,0
15:24:22,0,0
15:24:24,0,0
15:24:26,0,0
15:24:28,0,0
15:24:30,0,0
15:24:32,2067027,592996481 <--- python3 program start
15:24:34,6953101,2039012580
15:24:36,14494585,4264340060
15:24:38,24759568,7346128396
....
15:24:56,232929262,70526362509
15:24:58,269037963,81464038124
15:25:00,307757248,93171809261
15:25:02,348900718,105620730492
15:25:04,392646075,118841031269 <--- python3 program stop
15:25:06,438956016,132853968029 <-- Value column two increased by 49148217
15:25:08,488104233,147709011658 <-- Similar high increase
The reason is that lshwc takes the last read counter value and keeps
adding it to the total count, even if there zero delta to the previous
read value. Fix this by clearing the total count value between ioctl()
read operations.
Output after:
15:39:26,0,0
15:39:28,0,0
15:39:30,0,0
15:39:32,0,0
15:39:34,0,0
15:39:36,1367250,380721127 <--- python3 program start
15:39:38,4104791,1108181711
15:39:40,6740994,1858843730
15:39:42,9277545,2646351211
15:39:44,11895180,3444375804
....
15:40:16,54060774,16315924126
15:40:18,57830349,17513712210
15:40:20,61628170,18690791102
15:40:22,65410470,19864086006
15:40:24,69070765,21028646754 <--- python3 program stop
15:40:26,70429758,21472772340 <-- No increase of value in column two
15:40:28,70429758,21472772340
15:40:30,70429758,21472772340
15:40:32,70429758,21472772340
15:40:34,70429758,21472772340
15:40:36,70429758,21472772340
15:40:38,70429758,21472772340
Fixes: 27a562da0a ("cpumf/lshwc: Program to extract complete counter sets")
Reported-by: Axel Busch <Axel.Busch@ibm.com>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
pai dumps core when invoked with summary flag -S and
certain painnpa.XXXXX data files:
# ~/s390-tools/cpumf/pai -r -S
Segmentation fault (core dumped)
#
Fix this and check the existence of event raw data before
reading it. This avoid accessing NULL pointer trying to read raw
data when no counter values have been appended as raw data by the
kernel.
Fixes: dc73c77d73 ("cpumf/pai: Omit detailed event information when summary flag selected")
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Export and import the configurations with zdev:early on the
site-specific configurations as well. Filter the site-specific
configurations by attribute "zdev:early" and import the output
to the corresponding sites.
Note that --site parameter does not work with the device type.
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add export and import support for site-specific settings. For each
site-specific configuration, a new site-block will be generated as
below. The same format can be interpreted by the import function and use
the values on the device's site-specific configuration.
Typical example of a site-block in the export file:
[site3 dasd-fba 0.0.f001]
online=1
cmb_enable=0
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Introduce --deconfigure-all feature, which will remove all available
settings from the mentioned device. A typical device can have 10
different site-specific settings, active settings, persistent
settings and sometimes auto-configured settings configured in it.
--deconfigure-all can be used to remove all of them with a single
command.
usage: chzdev -D <device-id>
chzdev --deconfigure-all <device-id>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
lszdev must be modified to share the site-specific configuration
information from the persistent settings. The persistent configuration
array will be read and tabularized based on the site-id input from the
user.
This patch also accommodates the site specific information in the
lszdev --info command. New information about the site-ids are integrated
with the command. For example,
DEVICE dasd-eckd 0.0.f001
Names : -
Modules : dasd_eckd_mod dasd_mod
Online : no
Exists : yes
Persistent : yes
Sites : 1,2
ATTRIBUTE ACTIVE PERSISTENT SITE1 SITE2
cmb_enable "0" "0" "1" -
eer_enabled "0" - - -
erplog "0" - - -
failfast "0" - - -
last_known_reservation_state "none" - - -
online "0" "1" "1" "1"
raw_track_access "0" - - -
readonly "0" - - -
reservation_policy "ignore" - - -
use_diag "0" - - -
Each available site specific configuration will be shown as column. The
"Sites" parameter in the above output indicates the available site
configurations and the SITE1 and SITE2 colums indicates the detailed
configuration for the respective sites.
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Modify the dev_get_setting_list function to get the site-specific
attributes of the device. The new site_id parameter for this function
must be less than SITE_FALLBACK to read the site-specific attributes.
As SITE_FALLBACK setting is same as persistent setting, we do not need
a separate read function for it.
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The udev-rules must be modified to make it site-specific. The site
specific part of the rule should be executed only on the sites where the
devices belong. Change the generic udev rule to support the site-specific
udev-rule.
During boot, the current site-id is read from the LOADPARM which is
located at /sys/firmware/ipl. The zdev_id command reads this LOADPARM
and prints the SITE_ID based on the value. This SITE_ID is the
current site where the udev-rule is executing. Based on this assumption,
the rule is divided in to multiple blocks where each site block is executed
only for the corresponding sites.
The rule executes based on the value read from the LOADPARM.
1. When the LOADPARM specifies a site-id and if the current device has
an associated configuration settings, it will be used.
2. When the LOADPARM specifies a site, and the current device does not
have any associated configuration set, the udev rule uses the
fallback configuration settings.
3. If the device does not have a fallback-configuration settings or any
site-specific settings, no configurations will be used.
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The currently active site can be found from the loadparm attribute which
is located at /sys/firmware/ipl/loadparm. Read the value of loadparm and
extract the site_id.
The loadparm is an 8 byte alphanumerical IPL parameter. The content of
loadparm can be of different forms to indicate different boot menu
options, which are used by Linux for selecting the respective boot menu
entries. To indicate the site-id, loadparm adds a 'S' character. Where,
the following character after 'S' indicates either the site-id or
indivcation to derive the site-id from SSID.
For example,
If the loadparm value is Sn,'n' is the integer which could be one of the
valid site_ids from 0 to 9; i.e when booted on site-1, loadparm value will
be S1.
If loadparm value is "SS", zdev_id extracts the site_id from the SSID of
the current ipl device. For ccw and zfcp devices, the current ipl device-id
can be found at /sys/firmware/ipl/device.
In any case, if the loadparm contains invalid value, or empty, the
site_id will be default to the common-site.
After the first invocation of the zdev_id from udev-rule, the site-id
information is stored in /run/zdev_id.env file. This will reduce the
number of further invocation of zdev_id from within udev-rules.
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Currently zdev supports the configuration and maintenance of one single
persistent device state. With the introduction of sites, zdev should be
able to store, configure and maintaine NUM_SITES number of states in
the persistent configuration. This patch modifies the struct device and
adds a new site_specific device_state array, which stores the
persistent configuration for all the available sites.
Total number of available sites are configured with NUM_SITES. Where,
10 site-specific configurations and 1 common configuration.
1. during read, all site data is always read and update the
site_specific[] array.
2. dev->persistent is a copy of dev->site_specific[global_site_id]
3. modifications are only done on dev->persistent, and during write
dev->persistent overlays dev->site_specific[global_site_id]
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
In some high-availability setups, root and boot disks of a Linux
installation are copied to remote sites that can take over execution
of a Linux workload in case of an outage of the original site.
A site in this context is an execution environment such as an LPAR
or z/VM guest.
Each site may provide a different set of devices, or require different
parameters to be applied per device. chzdev supports site-specific
device configuration for up to 10 sites. Each site is identified by
a number in the range 0 to 9. You can provide a separate set of persistent
device configuration for each site. The IPL Load parameter value specified
during boot determines the currently active site. Only the device
configuration of the active site is applied during boot and when new
devices become available. A common configuration can be provided that is
applied when no site-specific configuration is available for a device in
the active site.
User can use the --site parameter to configure devices for a specific
site only. Configuration actions without a site parameter apply to the
common configuration.
During the boot, the active site configuration is chosed based on the
IPL LOADPARM variable. If the LOADPARM contains no valid site-id (0 to 9),
the fallback-site id will be used. The fallback-site-id can also be
configured with the zdev tools by not specifying the --site parameter.
Some of the new chzdev/lszdev commands with site-parameter can be as
follows
1. chzdev -ep f001 --site 3
This command is used to configure the device f001 for the site 3. During
boot, if the LOADPARM value is S3, this device configuration will be
used.
2. lszdev --site 3
This command lists all the devices which are configured for site 3.
3. chzdev -ep f001
Above command does not have a --site parameter. This device settings
will be used for the following conditions
1. When the loadparm specifies a site, (e.g S3), and the device does not
have an associated config-set, zdev uses fallback config set.
2. When the loadparm does not specify any site information, then the
fallback config set will be used.
When the loadparm specifies a site, and the device does not have an
associated config set, nor a fallback site, nothing is configured for this
device.
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
While at it, add a list with words to ignore. This suppresses the following codespell finding:
$ codespell libcpumf/libcpumf_cpuset.c
libcpumf/libcpumf_cpuset.c:15: parm ==> param, pram, parma
libcpumf/libcpumf_cpuset.c:17: parm ==> param, pram, parma
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Provie a CheckPatch configuration file and mention it in the coding style
guidelines (this feature was introduced with CheckPatch version 0.32 ~11 years
ago).
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add a .clang-format configuration and mention it in the coding guidelines.
Usage example:
$ clang-format -i **/*.[ch]
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
When configuring a vfio-ap device, specifying only control domains
without any usage domains results in a useless configuration in that
both adapters and usage domains are required to make cryptographic
resources available to the guest. Without that, the control domains
are useless. While the kernel allows this, let's reject this
combination with a message.
Suggested-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com>
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This patch enhances the zipl stage3 loader image adding a trailer as
required for secure boot by future firmware versions.
Note: with the change in this patch the padding via objcopy command line
options is replaced by padding via linker script directives with the
same effect.
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
lszcrypt allows the explicit definition of a list of devices. Continue
the parameter processing if multiple devices are specified.
Signed-off-by: Holger Dengler <dengler@linux.ibm.com>
Reviewed-By: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
In an upcoming patch the refactored function `pt_load_add` is reused. While at
it, add a wrap-around check to `pt_load_add`, replace `g.opts.device` access
with `fh->path` (this makes this function easier testable) and improve the
documentation.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Remove `static` attribute from `print_usage_exit` and declare it in the header
file `opts.h`. The function will be reused in a later patch.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Caller of `dfi_vmcoreinfo_get` must not modify the returned value, therefore
return a `const char *` value for `dfi_vmcoreinfo_get`.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add guarded storage registers support for the ELF input and the ELF output
format. See `man 2 s390_guarded_storage` for details about guarded storage.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The maximum size of all supported ELF note entries for a CPU can be 0x4a4 bytes
and not 0x4a0. Use a function for the calculation so it's easier to maintain.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Currently, only the ELF version `1` is defined by the ELF specification. See
`man 5 elf` for details. Therefore of course, we do only support this version.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The functions are refactored so the `struct zg_fh` value is now passed as
argument to the `nt_*` functions instead of accessing the global variable `g.fh`
from within of the functions. This makes the functions reusable and easier to
test. While at it, improve the documentation of `nt_read`.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Introduce variable `phdrs` and shrink the scope of `phdr`. This removes
duplicated code `&phdr[i]` and makes the code easier to read. While at it,
constify the parameter of `pt_notes_add`.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
`ehdr->e_phoff` has the type `Elf64_Off` and this maps to `uint64_t`, but `off_t` is signed. Let's
add a check for this.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
generalize the collection step name from "docker" to "container host"
initial version of adding data collection for OCP.
all log file content might be too much for most installations
Reviewed-by: Alexander Klein <alkl@de.ibm.com>
Reviewed-by: Mario Held <mario.held@de.ibm.com>
Reviewed-by: Mike Storzer <mstorzer@de.ibm.com>
Signed-off-by: Joern Siglen <siglen@de.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
GUINT32_TO_BE and GUINT32_FROM_BE do exactly the same in case of glib2, just the
naming differs. However, at this point the conversion is from be to system
endianness therefore `GUINT32_FROM_BE` is the proper macro.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
It's often useful to know how much data was actually copied, therefore let's
introduce an nullable parameter `@copied` to `pv_gbytes_memcpy`.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
...by adding a compile time assertion about the buffer size. While at it, report
the actual user data size in case of an error.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The endianness handling was only partially implemented for uvio.c. Let's remove
it since doesn't make much sense here, because the IOCTL must be build on the
same system where they're actually executed.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
the buffer sizing did not work any longer
add explaining comments and rework the variable names for claritiy
refering commit f7cc14753cc9d930af804e2ac3ce108a12145db6
Reported-by: Mike Storzer <MSTORZER@de.ibm.com>
Reviewed-by: Mario Held <mario.held@de.ibm.com>
Signed-off-by: Joern Siglen <siglen@de.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Use `PV_CERT_ERROR` error domain whenever useful. Currently, it's only used
internally in libpv and therefore there is no problem in changing it.
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
There should be no problem with this change since the changed value was never
used. Therefore, let's remove the assignment and declare the parameter as const
to prevent such a behavior in the future.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The machine types are not strictly increasing anymore since Z16, therefore,
we cannot use numerical comparison to find out the correct HSA size
of a machine.
Fixes: 2515832469 ("util_arch: Add IBM z16 as known machine")
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
`afl-clang` requires a white space between a option name and the option value.
Therefore let's fix this for `-xc` by adding a white space.
How to reproduce:
$ make -C zdump CC=afl-clang-fast LINK=afl-clang-fast
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
some versions of /bin/dash do interpreted our commands different, which
causes a variable failure and termination of the script.
e.g. a new line char "\n" will split the cmd_type to a multiple line variable
not working with the followup commands. adding the head command does avoid
multiline variables now.
Problem found in Ubuntu 20.4 and some older Ubuntu versions
Reviewed-by: Mario Held <mario.held@de.ibm.com>
Signed-off-by: Joern Siglen <siglen@de.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
move tool checking to the top of the script and add the output to
the check function (-c) for easy verifivation and testing
Reviewed-by: Mario Held <mario.held@de.ibm.com>
Signed-off-by: Joern Siglen <siglen@de.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
All debian distors use the dash shell as default, where type is not supprting "-t" parameter
Remove of "-t" where not important and change type check not using -t
Reviewed-by: Mario Held <mario.held@de.ibm.com>
Signed-off-by: Joern Siglen <siglen@de.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Easier to read for a first glimpse than the (still required) full config.
$ man multipathd
list|show config local
Show the currently used configuration like show config, but lim‐
iting the devices section to those devices that are actually
present in the system.
Works as of multipath-tools 0.7.8 commit
c23924dc74ee ("multipathd: implement "show config local"")
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
==660622== 385 bytes in 7 blocks are definitely lost in loss record 30 of 37
==660622== at 0x484417C: malloc (in /usr/libexec/valgrind/vgpreload_memcheck-s390x-linux.so)
==660622== by 0x4E93BD7: strdup (strdup.c:42)
==660622== by 0x11249F: zg_strdup (zg.c:115)
==660622== by 0x11249F: zg_open (zg.c:164)
==660622== by 0x114FBF: dfi_dump_open (dfi.c:750)
==660622== by 0x114FBF: dfi_init (dfi.c:772)
==660622== by 0x111465: do_copy (zgetdump.c:192)
==660622== by 0x111465: main (zgetdump.c:216)
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
we do miss a simple way to see the dbginfo.sh version used by the
customer for the debug generation. saving the version now to dbginfo.log
Reported-by: Mike Storzer <MSTORZER@de.ibm.com>
Reviewed-by: Mario Held <mario.held@de.ibm.com>
Signed-off-by: Joern Siglen <siglen@de.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Although the previous patch enables pvattest to display the
config UID this script enables the user to extract the config UID of
the SE-guest and the additional data if specified. This allows users of
pvattest v2.22.0 to view the config UID without examining binary blobs.
$ ./pvattest-info attresult.bin
Config UID:
1a1a1a1a1a1a1a1a1a1a1a1a1a1a1a1a
Additional Data:
1b1b1b1b1b1b1b1b1b1b1b1b1b1b1b1b1b1b1b1b1b1b1b1b1b1b1b1b1b1b
1b1b
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
In verbose mode (-v) `pvattest verify´ now also prints
"Attestation measurement verified", if the verification was successful and the
Config UID of the SE-guest and any additional data if available.
$ pvattest -V verify [...]
Attestation measurement verified
Config UID:
1a1a1a1a1a1a1a1a1a1a1a1a1a1a1a1a
Additional Data:
1b1b1b1b1b1b1b1b1b1b1b1b1b1b1b1b
1b1b1b1b1b1b1b1b1b1b1b1b1b1b1b1b
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Change the name of `hexdump´ to `pvattest_log_bytes´. Additionally, allow
that function to dump the bytes as a single hexadecimal number.
Change the name of `printf_hexdump´ to `pvattest_hexdump´.
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Map the Ultravisor return code 0x2 to "Invalid UV command" string. This
results in better error messages.
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The dracut installation directory is referenced from `chreipl-fcp-mpath`,
`zdev`, and `zipl`; in each with its own individual definition and
variable name. This makes it unnecessarily hard to change it when
installing from the top level directory of s390-tools and passing
variable overwrites via the command line.
Fix this by defining a common `DRACUTDIR` variable in the shared
`common.mak` file, and referencing this in each tool as base directory.
With this a user can simply pass `DRACUTDIR=/foo/bar/baz` on the
commandline and change the installation for all three tools.
Further, also derive common `DRACUTCONFDIR` and `DRACUTMODDIR` variables
from `DRACUTDIR` in `common.mak`, so that `zdev` and `zipl` don't use
different variable names for the same directory anymore, and all these
are defined together in a common place.
Semantically nothing changes for a default build/installation.
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
UDEVDIR is used in both `chreipl-fcp-mpath` and `zdev`, but with a
different meaning. In the former it points to the base udev directory,
not the rules directory; in the later it points to the rules directory.
If someone was to call `make` from the top level directory, and set
UDEVDIR for the whole build/installation, it would either break `zdev`
or `chreipl-fcp-mpath` (depending on what it was set to).
Fix this by pulling the definition of it in the shared `common.mak`
file, and giving it a common meaning. Point UDEVDIR to the base udev
directory, and UDEVRULESDIR to the rules directory below it.
Semantically nothing changes for a default build/installation.
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Fixes a bug that leads to a segmentation fault when no parmline is
provided.
Fixes: 11b401b5 ("zipl: move and make check for maximum command line length dynamic")
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Fixes a bug that make still tried to build pvattest even when the
compilation of pvattest was turned off.
This lead to a build bug when one of the dependencies was not met.
Also fixes the check of the OpenSSL version at build time.
Fixes: 3ab06d77 ("pvattest: Create, perform, and verify attestation measurements")
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Fixes a bug that make still tried to build libpv even when the
compilation of libpv was turned off.
This lead to a build bug when one of the dependencies was not met.
Also fixes the check of the OpenSSL version at build time.i
Fixes: 38639269 ("libpv: New library for PV tools")
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
pv_BIO_reset() wrongfully handled the BIO_reset() rc for non-file-backed BIOs.
This is currently not an issue as the only non-file BIO used cannot fail
at BIO_reset()
Fixes: 3ab06d77fb ("pvattest: Create, perform, and verify attestation measurements")
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The returncode handling for BIO_reset() was wrong when handling with
file based BIOs.
This resulted in a bug that DER formated certificates cannot be read
by genprotimg which is now fixed.
Fixes: d90344a2 (genprotimg: check return value of BIO_reset)
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
dasdfmt.c: In function ‘dasdfmt_write_labels’:
dasdfmt.c:1110:22: warning: ‘write’ reading 88 bytes from a region of size 4 [-Wstringop-overread]
1110 | rc = write(fd, &vlabel->vollbl, (sizeof(*vlabel)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1111 | - sizeof(vlabel->volkey)));
| ~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from dasdfmt.c:23:
../include/lib/vtoc.h:84:14: note: source object ‘vollbl’ of size 4
84 | char vollbl[4]; /* volume label */
| ^~~~~~
In file included from ../include/lib/util_opt.h:16,
from dasdfmt.c:20:
/usr/include/unistd.h:378:16: note: in a call to function ‘write’ declared with attribute ‘access (read_only, 2, 3)’
378 | extern ssize_t write (int __fd, const void *__buf, size_t __n) __wur
| ^~~~~
GitHub-ID: https://github.com/ibm-s390-linux/s390-tools/pull/137
Signed-off-by: Dan Horák <dan@danny.cz>
Acked-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Replace strncpy() with util_strlcpy() which provides the required
semantic.
In function ‘dasdview_print_format1’,
inlined from ‘dasdview_view_standard’ at dasdview.c:1952:4,
inlined from ‘dasdview_view’ at dasdview.c:2165:3,
inlined from ‘main’ at dasdview.c:2364:3:
dasdview.c:1791:25: warning: ‘strncpy’ output may be truncated copying 16 bytes from a string of length 1023 [-Wstringop-truncation]
1791 | strncpy(asc, (char *)dumpstr + i, 16);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
dasdview.c:1792:25: warning: ‘strncpy’ output may be truncated copying 16 bytes from a string of length 1023 [-Wstringop-truncation]
1792 | strncpy(ebc, (char *)dumpstr + i, 16);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In function ‘dasdview_print_format2’,
inlined from ‘dasdview_view_standard’ at dasdview.c:1935:4,
inlined from ‘dasdview_view’ at dasdview.c:2165:3,
inlined from ‘main’ at dasdview.c:2364:3:
dasdview.c:1825:25: warning: ‘strncpy’ output may be truncated copying 8 bytes from a string of length 1023 [-Wstringop-truncation]
1825 | strncpy(asc, (char *)dumpstr + i, 8);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
dasdview.c:1826:25: warning: ‘strncpy’ output may be truncated copying 8 bytes from a string of length 1023 [-Wstringop-truncation]
1826 | strncpy(ebc, (char *)dumpstr + i, 8);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
GitHub-ID: https://github.com/ibm-s390-linux/s390-tools/pull/137
Signed-off-by: Dan Horák <dan@danny.cz>
[hoeppner@linux.ibm.com: sort include]
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The build produces a number of warnings like the ones below. The
unaligned pointers are expected, thus silence the warnings by disabling
the compiler diagnostics.
ziomon_dacc.c: In function ‘read_message’:
ziomon_dacc.c:189:44: warning: taking address of packed member of ‘struct message’ may result in an unaligned pointer value [-Waddress-of-packed-member]
189 | if ( (rc = read_message_header(fp, &msg->length, &msg->type)) )
| ^~~~~~~~~~~~
or
In file included from ziomon_mgr.c:36:
blkiomon.h: In function ‘blkiomon_stat_init’:
blkiomon.h:70:21: warning: taking address of packed member of ‘struct blkiomon_stat’ may result in an unaligned pointer value [-Waddress-of-packed-member]
70 | minmax_init(&bstat->size_r);
| ^~~~~~~~~~~~~~
GitHub-ID: https://github.com/ibm-s390-linux/s390-tools/pull/137
Signed-off-by: Dan Horák <dan@danny.cz>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The kernel already provides the same macro as does the zt_common.h file,
thus check for its availability first.
CC zconf/qeth/lsqeth.o
In file included from ../../include/lib/util_base.h:17,
from lsqeth.c:30:
../../include/lib/zt_common.h:27: warning: "_AC" redefined
27 | #define _AC(X, TYPE) X##TYPE
|
In file included from /usr/include/linux/ethtool.h:17,
from lsqeth.c:12:
/usr/include/linux/const.h:21: note: this is the location of the previous definition
21 | #define _AC(X,Y) __AC(X,Y)
|
GitHub-ID: https://github.com/ibm-s390-linux/s390-tools/pull/137
Signed-off-by: Dan Horák <dan@danny.cz>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This instruction is not present on older machines, therefore
use ltr.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Fixes: 1627c6a39f ("zipl: Support command lines longer than 896 bytes in bootloader")
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The new version of lspci does support an extended verbose mode "-vvv"
Using the the tripple v parameter does also work for the old version
having the same result as the double v called before.
Reported-by: Eberhard Pasch <epasch@de.ibm.com>
Reviewed-by: Mario Held <mario.held@de.ibm.com>
Signed-off-by: Joern Siglen <siglen@de.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
https://www.kernel.org/doc/html/latest/trace/ftrace.html?highlight=free_buffer
free_buffer:
If a process is performing tracing, and the ring buffer should be
shrunk "freed" when the process is finished, even if it were to be
killed by a signal, this file can be used for that purpose. On close
of this file, the ring buffer will be resized to its minimum size.
Having a process that is tracing also open this file, when the process
exits its file descriptor for this file will be closed, and in doing so,
the ring buffer will be "freed".
It may also stop tracing if disable_on_free option is set.
$ cat /sys/kernel/debug/tracing/buffer_size_kb
7 (expanded: 1408)
$ cat /sys/kernel/debug/tracing/free_buffer
cat: /sys/kernel/debug/tracing/free_buffer: Invalid argument
$ cat /sys/kernel/debug/tracing/buffer_size_kb
0
Reported-by: Thomas Lambart <Thomas.Lambart2@ibm.com>
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The current implementation drops the reason why a download of a CRL
failed. This is changed to the reporting of the error triggered by the
last CRL download attempt.
This mainly helps to check for the download error during CI testing
and prevent connectivity issues to be the reason of a test failure.
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Use PMU named pai_ext to extract the PMU type number required
for the installation of PAI NNPA counters using perf_event_open()
system call.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add a check to detect Processor Activity Instrumentation (PAI)
Extension 1 facility unit.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
When the summary flag is selected do not print detailed information
on every single event. Just print the summary information on each
non-zero counter value.
Suggested-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
During recording, progress information is displayed on the screen
on how many event have been processed and at which offset these
events have been extracted from the ring buffer.
This information is usually of no interest to the user. Omit this
data and only print them when requested via verbose flag.
Suggested-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add virtual counters pai_user and pai_kernel to detail all Processor Activity
Instrumentation (PAI) counters in user resp. kernel space. Once activated,
they will show all counters for the corresponding set. Add option -n to limit
the display to only non-zero counter values.
Add support for cpu hotplug events based on libudev. CPU hotplug events are
used to either detach from a vanishing CPU or (re-)attach to a (re-)appearing
CPU. In that case, a "hotplug detected" virtual counter is set to a non-zero
value to indicate possible loss of counters which happens when CPACF is used
on the CPU before cpacfstatsd could attach to it. The hotplug indication is
cleared once all counters are deactivated.
Add support for JSON output. The JSON document is an array of JSON objects
representing the counters and their values. Every object has a name (property
"counter") and a value (property "value"). For PAI counters, the counters
also have a space (property "space") determining the counter set pai_user or
pai_kernel, and a numeric id (property "counterid") that can be used to filter
the JSON document.
Signed-off-by: Juergen Christ <jchrist@linux.ibm.com>
Reviewed-By: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
cpacfstatsd now correctly handles offline cpus and dynamically attaches to
cpus once they get online. If events are enabled when a hotplug event
occurs, cpacfstatsd uses a pseudo-counter to notify user applications about
the occurence of this event and a potential data inaccuracy.
cpacfstats shows if a hotplug event has been detected since at least one
counter was activated. As soon as all counters are deactivated, the
hotplug detection state is reset.
Signed-off-by: Juergen Christ <jchrist@linux.ibm.com>
Reviewed-By: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The cpacfstats daemon is susceptible to dos attacks from malicious clients
that connect but either do not send a query or receive an answer fast
enough. The latter currently is impossible but might occur once we
introduce further counters.
Solve both problems by exploiting a timed read/write operation in the
daemon and close the connection on timeout.
Signed-off-by: Juergen Christ <jchrist@linux.ibm.com>
Reviewed-By: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Remove `-rdynamic` since it's a linker flag. This should not cause any problems
because we differentiate between compilation and linking by default. While at
it, adapt the `print_backtrace` documentation accordingly.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Acked-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Use util_file_read_va() function to read out the event number
given the event file. Also use util_strdup() function to save
the event name. This function terminates on Out Of Memory condition.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
cryptsetup 2.1.0 requires excessive amount of RAM (1GB) to luksOpen encrypted
drives (LP: #1820049).
LUKS2 introduced support for Argon2i and Argon2id as a Password-Based Key
Derivation Function (PBKDF).
Argon2 is the winner of Password Hashing Competition and is now officially
recommended by RFC 9106.
PBKDF2 is currently used in zkey to mitigate out-of-memory errors when
multiple LUKS2 volumes are opened automatically via /etc/crypttab.
This patch is to use Argon2i (the deflaut algorithm) as key derivation function
for LUKS2 volumes, but with options for low memory and time requirements.
Using the default Argon2i options might still cause out-of-memory errors.
Link: https://bugs.launchpad.net/ubuntu/+source/cryptsetup/+bug/1820049
Closes: https://github.com/ibm-s390-linux/s390-tools/pull/138
Signed-off-by: Frank Heimes <frank.heimes@canonical.com>
Acked-by: Ingo Franzki ifranzki@linux.ibm.com
[hoeppner@linux.ibm.com: fix whitespace, line break, and commit message]
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Extract the minor version and modification level separately.
Previously only the modification level has been extracted, and was
reported as minor version.
Currently no one is checking the minor version or modification level,
so it does not hurt. But maybe in the future one will check, so report
it correctly.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
During plugin initialization, the external libraries such as the
EP11 or CCA host libraries are set up, if the configuration is
appropriate.
A secure identity key may be generated once the APQNs are configured,
but before the server connection is configured. Trying to re-encipher
the plugin's secure keys to a new HSM master key at that stage fails
with 'ERROR: Invalid ext lib type: 0' because the external libraries
have not been setup yet.
Change the code to setup the libraries once the APQNs have been
configured, and not only after the server connection has been
configured.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Increase initial update interval from 200ms to 1 seconds to avoid
fluctuations on the initial data output.
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
pvattest is a tool to attest an IBM Secure Execution guest.
In a trusted environment, one can create a request using
`pvattest create`. To get a measurement of an untrusted
IBM Secure Execution guest call 'pvattest perform'.
Again in a trusted environment, call 'pvattest verify'
to verify that the measurement is the expected one.
The tool runs on s390 and x86.
It has the same requirements like libpv and therefore
requires openssl v1.1.1+, glib2.56+, and libcurl.
Additionally, to measure, the linux kernel must provide
the Ultravisor userspace interface `uvdevice` at /dev/uv
and must be executed on an IBM Secure Execution guest on
hardware with Ultravisor attestation support, like IBM z16 or later.
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
libpv is a collection of definitions and functions related to
Protected Virtualization (PV).
The functions cover mainly encryption (e.g. AES-GCM)
and certificates (X509). There are also helping functions for glib2.
Most of the code is extracted+refactored from `genprotimg`, which
will use this library in future.
Requires openssl v1.1.1+, glib2.56+, and libcurl.
libpv is not designed or intended to be dynamically linked or used
outside of this project. Its purpose is to avoid code duplication
as PV tools do very similar things regarding cryptography.
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Acked-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This commit introduces a new module containing various helpers for
NGDump stand-alone dump. The purpose of these helpers is to facilitate
the implementation of DT and DFI interfaces for NGDump, share code
between both, reduce duplication and enable unit testing later on.
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Return the partition number which contains the given block range,
before it was tested for exact match between a partition block range
and the one provided by user. The old behavior with exact match
should still work, this change just relaxes the partition matching
algorithm and allows one to find a partition which contains the given
block range.
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This commit finalizes the implementation of the new stand-alone dump -
Next Gen Dump (NGDump).
NGDump stand-alone dump is a universal stand-alone dump which works for both
SCSI and NVMe disks. But currently can be used only with NVMe disks
and SCSI stand-alone dump remains the default for SCSI disks.
Currently, this stand-alone dump can be used only on IBM z15 or newer
machine generations because it requires larger amount of HSA memory offered
by firmware only on IBM z15 machines. Whereas SCSI stand-alone dump is able
to work with HSA memory of 32M, the new stand-alone dump requires 512M HSA
memory at the moment.
NGDump stand-alone dump installation is initiated by passing a path to
a NVMe disk partition to zipl via the command-line -d, similar to SCSI
stand-alone dump. zipl will then:
- build a dumper initramfs with either dracut (Fedora/RHEL/SLES) or
initramfs-tools (Ubuntu/Debian)
- format the given NVMe partition with ext4 file system
- create a bootmap file on the newly created file system using the built
initramfs and the currently active kernel image
- install a boot loader on the disk the given dump partition belongs to
The operations described above are destructive for the given NVMe dump
partition and the boot record(s) of its disk.
After the installation step, users can configure the dumpconf to IPL
the dumper automatically on panic or trigger a dump manually via HMC
interface.
When activated, the dumper will create a dump ELF file named "dump.elf"
on the given NVMe dump partition by using the makedumpfile tool. The kdump
compressed file format is not supported yet due to zgetdump not being able
to read such a file format. Therefore, the dumper is restricted to write
the dump only in ELF format but only kernel pages which are in use.
This will usually make the dump smaller than the original size of
/proc/vmcore and the whole dump process faster as well.
Example configuration for dumpconf:
ON_PANIC=dump # or dump_reipl
DUMP_TYPE=nvme
FID=0x00000001
NSID=0x00000001
BOOTPROG=0
BR_LBA=0
$ systemctl enable --now dumpconf
To install the dracut support on Fedora/RHEL/SUSE:
$ make -C zipl/dracut HAVE_DRACUT=1 install
To install the initramfs-tools support on Ubuntu/Debian:
$ make -C zipl/initramfs-tools HAVE_INITRAMFS=1 install
Example of NGDump console output on SLES during dump
----------------------------------------------------
Starting NGDump...
[ 8.932343] ngdump.sh[327]: NGDump started
[ 8.934739] ngdump.sh[336]: Checking for memory holes : [ 0.0 %] /
[ 8.967536] ngdump.sh[336]: Checking for memory holes : [100.0 %] |
[ 9.076976] ngdump.sh[336]: Excluding unnecessary pages : [100.0 %] \
[ 11.721157] ngdump.sh[336]: Copying data : [ 0.0 %] -
[ 12.317319] ngdump.sh[336]: Copying data : [ 22.5 %] / eta: 2s
[ 13.273000] ngdump.sh[336]: Copying data : [100.0 %] | eta: 0s
[ 13.273244] ngdump.sh[336]: The kernel version is not supported.
[ 13.273263] ngdump.sh[336]: The makedumpfile operation may be incomplete.
[ 13.273281] ngdump.sh[336]: The dumpfile is saved to /ngdump/dump.elf.
[ 13.273299] ngdump.sh[336]: makedumpfile Completed.
Example of NGDump console output on Ubuntu during dump
-------------------------------------------------------
[ 3.240078] zdump: The dump process started for a 64-bit operating system
Loading, please wait...
Starting version 245.4-4ubuntu3.17
Begin: Starting firmware auto-configuration ... done.
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ...
Begin: NGDump ...
Checking for memory holes : [ 0.0 %] /
Checking for memory holes : [100.0 %] |
Excluding unnecessary pages : [100.0 %] \
Copying data : [ 0.0 %] -
Copying data : [ 40.7 %] / eta: 1s
Copying data : [100.0 %] | eta: 0s
The kernel version is not supported.
The makedumpfile operation may be incomplete.
The dumpfile is saved to /ngdump/dump.elf.
makedumpfile Completed.
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Tested-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Tested-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The purpose of the new zipl helper script is to build a dumper initramfs
for NGDump stand-alone dump. zipl executes the helper script when
preparing a NVMe dump partition for stand-alone dump.
The zipl helper script expects a single parameter - a path to the dump
partition to store a dump on. The helper script terminates with 0 on
success and a positive value otherwise.
The zipl helper script performs the following steps:
- It builds an initramfs image suitable for dumping. To perform this step,
the script employs the dracut tool on Fedora/RHEL/SLES and
the initramfs-tools on Ubuntu/Debian.
- It outputs the path to the newly built initramfs image and the currently
active kernel bzImage on the standard output.
- It prints the kernel command-line to be used by the dumper on
the standard output.
On success, zipl expects the helper script to return at least three lines
containing:
- initrd=<path to an initramfs image>
- kernel=<path to a kernel bzImage>
- cmdline=<kernel command-line parameters>
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Tested-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The NGDump initramfs-tools module is required to build an initramfs image
to be used with NGDump stand-alone dump. NGDump stand-alone dump does not
use a pre-built initramfs image in contrast to SCSI stand-alone dump.
Instead, an initramfs image is built with initramfs-tools if NGDump
stand-alone dump is installed on a NVMe partition.
The NGDump initramfs-tools module ensures that all necessary tools are
present within the built initramfs and a dump of /proc/vmcore is initiated
to the chosen NVMe partition when the installed dumper is IPLed.
The NGDump intramfs-tools module installs a configuration file and
a dump script into dumper initramfs. This dump script starts at boot
shortly after the initialization of the dump target device. It reads
the aforementioned configuration file that contains the name of a dump
partition to store a dump on. The dump script reads the configuration file,
mounts then the dump target device, creates a copy of /proc/vmcore with
the makedumpfile tool on it, and then shuts down the system.
Ubuntu and Debian are the main Linux distributions targeted by this
initramfs-tools module.
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Tested-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The NGDump dracut module is required to build an initramfs image to be used
with NGDump stand-alone dump. NGDump stand-alone dump does not
use a pre-built initramfs image in contrast to SCSI stand-alone dump.
Instead, an initramfs image is built with dracut if NGDump stand-alone dump
is installed on a NVMe partition.
The NGDump dracut module ensures that all necessary tools are present
within the built initramfs and a dump of /proc/vmcore is initiated
to the chosen NVMe partition when the installed dumper is IPLed.
The NGDump dracut module installs a new systemd service and a dump script
into dumper initramfs. The systemd init process starts the NGDump service
at boot shortly after the initialization of the dump target device.
The NGDump systemd service, in its turn, starts the dump script provided
by the new dracut module. The dump script mounts then the dump target
device, creates a copy of /proc/vmcore with the makedumpfile tool on it,
and then shuts down the system.
The NGDump dracut module can be used on any Linux distribution which
supports dracut. But the primary targets are:
- Fedora
- RHEL
- SLES
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Tested-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This change adds a new parameter to the function bootmap_create_file()
that requires the caller to specify a path to the directory where
a bootmap file will be created. The primary motivation for this change is
to support NVMe stand-alone dump, in that case the job's bootmap directory
is not set.
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The purpose of this change is to simplify the function
bootmap_create_device() and make it more readable. Furthermore,
the dump partition check can be reused for NVMe dump partitions later on.
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The purpose of this change is to simplify the function
bootmap_create_device() and make it more readable.
Furthermore, make bootmap_create_device() more robust by checking the return
value of disk_write_block_aligned().
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The purpose of this change is to simplify the function bootmap_create(),
make it more readable and prepare for new changes that will follow.
The original function bootmap_create() tried to handle two different cases
and, therefore, contained many conditional statements which had a negative
effect on readability.
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The purpose of this change is to simplify the function bootmap_create(),
make it more readable and prepare for new changes that will follow.
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Until now, NVMe disks were handled by zipl as SCSI disks. To support
NVMe stand-alone dump, it became necessary to further differentiate between
both types of disks.
There are two cases that must be handled:
1. A non-device-mapper device is a NVMe disk if it is assigned to the blkext
device driver.
2. A device-mapper disk is a NVMe disk if the ioctl NVME_IOCTL_ID succeeds.
This case is necessary to properly recognize NVMe disks which are
DM devices and, therefore, not directly handled by the blkext device
driver.
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Acked-by: Stefan Haberland <sth@linux.ibm.com>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Use util_file_read_va() function to read out the event number
given the event file. Also use util_strdup() function to save
the event name. This function terminates on Out Of Memory condition.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
genprotimg is a user command and as such installed into /usr/bin. Adapt
the man page accordingly and move it from section 8 (system commnds) to
section 1 (user commands).
Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The static analysis tool for Debian packages 'lintian', especially if called
like 'lintian -EvIL +pedantic', checks manual pages for correctness and typos.
This commit fixes typos that were identified by lintian and marked with
'typo-in-manual-page' while s390-tools version 2.20.0 was packaged.
Closes: https://github.com/ibm-s390-linux/s390-tools/pull/134
Signed-off-by: Frank Heimes <frank.heimes@canonical.com>
Acked-by: Steffen Maier maier@linux.ibm.com [ziomon]
Acked-by: Ingo Franzki ifranzki@linux.ibm.com [zkey]
[hoeppner@linux.ibm.com: fix commit message]
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The provider functions are passed to OpenSSL in the dispatch array
casted to 'void (*)(void)', so they can not be type checked by the
compiler. Add function prototypes using the OpenSSL provided
function typedefs to allow the compiler to check the function
signatures.
No functional change.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Gcc 12 produces a -Wmaybe-uninitialized warning that the content
of the tmp buffer may be uninitialized. This is a false positive.
Silence the warning by using calloc instead of malloc to ensure
that the allocated buffer is initialized.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Create an empty environment file /etc/ziplenv at make install
time if that file doesn't exist
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Eduard Shishkin <edward6@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add definitions of sites, namespaces and sections.
Document the new options --site (-S) and --effective-site (-E)
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Eduard Shishkin <edward6@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
. Support multiple namespaces in the installed environment block;
. Add option --site (-S) to specify a particular namespace
when operating on the installed environment block;
. Add option --effective-site (-E) to specify a particular
namespace. When using in a combination with the option -l
(--list), it displays zIPL environment that would take place if
the specified namespace was activated at boot time;
. Modify set/unset/reset/list operations over the installed
environment block in the case when the option --site is specified
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Eduard Shishkin <edward6@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
. Parse LOADPARM specified by user to find out site-ID;
. Support multiple namespaces in the environment block. Use hash
function on "extended" strings (i.e. strings with logical
prefixes) for the key-value store implementation;
. Added logic to activate a particular namespace by site-ID passed
by user via LOADPARM;
. Modify the logic of evaluation of zIPL environment variables in
the kernel command line. Use the activated namespace for the
evaluation
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Eduard Shishkin <edward6@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Support multiple namespaces in environment block. Use hash
function on "extended" strings for key-value store.
Support multiple sections in environment file.
Modify the import environment precedure to be "section-aware"
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Eduard Shishkin <edward6@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Consolidate type definitions in order to avoid duplicated code, getting
better compiler support, and to avoid confusing namings for the same
thing - e.g. `blk_end` vs. `blockcnt` field name used in the old `struct
fba_dump_param` definitions. It also allows us to get rid of two
`uint64_t` casts.
While at it, fix the documentation of `struct eckd_blockptr`.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
...otherwise `.note.gnu.build-id` will be put at 0x0 (location for s390x
lowcore) if the linker option `--build-id` is used (which is the default
if gcc is used for linking).
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Use the `tpi_info` struct definition, similar to the Linux kernel, in
the lowcore struct. This change allows us to use simple assignments
instead of using casts. Additionally, there is the advantage that the
lowcore definition from the s390-tools now looks more similar to the
lowcore definition used by the Linux kernel.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Until recently dumpconf might have been installed in two different
locations, /etc/init.d/ and /lib/s390-tools/. As dumpconf is now part of
the helper scripts in the scripts directory, extend the installation
rule and add the %S390_TOOLS_VERSION% wildcard to the script along the
way for correct version output.
The installation rule in the systemd/Makefile is removed, bringing it in
line with cpictl.
Acked-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Modern distributions use systemd and a corresponding systemd unit file
is provided that handles the dumpconf tool. The tool is also the last
script left in etc/init.d. Move it to scripts and get rid of the init.d
directory altogether.
Acked-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
For cpacfstatsd, cpuplugd, and mon_statd there are still SysV daemon
scripts available. However, modern distributions use systemd and
corresponding systemd unit files are provided and in use for a long time
already.
Remove the daemon scripts for the obsolete SysV init system as they're
not used by modern systems anymore.
Acked-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The ap_tools utilities are intended to be used in conjunction with
the mdevctl utility for safely managing and inspecting vfio-ap
mediated devices. For now, this will consist of the ap-check tool
which will be driven via a call-out from mdevctl to validate a
proposed vfio-ap mediated device change.
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Jason J. Herne <jjherne@linux.ibm.com>
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
zdev uses a particular set of exit codes -- In preparation for sharing
some zdev udev code with other libraries, let's also create a libutil
include to specify reusable exit codes. For now, let's just initialize
it with the codes from zdev we care about.
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Jason J. Herne <jjherne@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add IBM z16 extended counter set. For each counter in this set
add the counter number, the short and long description and the
counter number.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
OpenSSL commit ee22a3741e3fc27c981e7f7e9bcb8d3342b0c65a changed the
OpenSSL provider's keymgmt_match() function to be not so strict with
the selector bits in regards to matching different key parts.
Adapt the secure key provider's match function accordingly.
This means, that if the public key is selected to be matched, and
the public key matches (together with any also selected parameters),
then the private key is no longer checked, although it may also be
selected to be matched. This is according to how the OpenSSL function
EVP_PKEY_eq() is supposed to behave.
OpenSSL function SSL_CTX_use_PrivateKey() calls the providers match
function to check if the private key specified matches the public key
of the certificate using EVP_PKEY_eq(). EVP_PKEY_eq() includes the
private key into the selector bits here, although the certificate
only contains the public key part.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The Processor Activity Instrumentation facility (PAI) Extension 1
adds support for the counter set for Neural Network Processing Assist
(NNPA) counters.
NNPA counter values are appended as raw data to the data report.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add a check to detect Processor Activity Instrumentation (PAI)
Extension 1 facility unit. This covers the counter set for
Neural Network Processing Assist (NNPA) counters.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The Processor Activity Instrumentation facility (PAI) uses the
perf_event_open system call to report data and the crypto counter
values. The data can be inspected with the perf tool in a very
generic way using raw data report and a hex dump utility.
The pai tool also uses the perf_event_open system call to record the
data, but uses specialized event attributes for recording detailed
information such as the recording of fork, exit, exec system call
events and context switch events.
Cryptography counter values are appended as raw data attachments.
The pai command can be used for recording and reporting.
Also a list of CPUs can be specified.
The recording ring buffers are created per CPU
and are named paicrypto.XXX where XXX stands for the CPU number.
The numbering scheme has leading zeros, such as 007 for CPU number 7.
For invocation and possible command line options see the man page.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Since the switch to fuse3 setting the hard_remove option with the
FUSE_LIB_OPT() macro is no longer supported. See libfuse commit
8ee553dac029 ("fuse_new(): don't accept options that don't make sense
for end-users") for details. To fix this, add an appropriate init
function which sets this option.
Fixes: https://github.com/ibm-s390-linux/s390-tools/issues/131
Fixes: e679a88d88 ("Switch from fuse2 to fuse3")
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Fix the doxygen comments and add a description on the return values.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
By default, the Bash file globbing pattern '*' doesn't list files prefixed by a
dot (see https://linux.die.net/man/1/bash). Let's fix this by using the pattern
`.*` instead. While at it, add `--` option to remove possible problems with
leading dashes in filenames.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This work around fixes the gcc-12 false positive by disabling `Warray-bounds`:
CC genprotimg/boot/stage3a.o
In file included from stage3a.c:14:
In function ‘__test_facility’,
inlined from ‘test_facility’ at ../../include/boot/s390.h:428:9,
inlined from ‘start’ at stage3a.c:42:7:
../../include/boot/s390.h:418:17: error: array subscript 0 is outside array bounds of ‘void[0]’ [-Werror=array-bounds]
418 | return (*ptr & (0x80 >> (nr & 7))) != 0;
| ^~~~
Unfortunately, there is currently no better fix available that doesn't result
in larger boot loader code sizes. Given the importancy of the boot loader file
sizes the other fixes aren't acceptable. The Linux kernel shares the
problem (but for performance reasons), take a look at the discussion
https://lore.kernel.org/lkml/yt9dzgkelelc.fsf@linux.ibm.com/ for details.
Fixes: https://github.com/ibm-s390-linux/s390-tools/issues/130
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This patch implements an additional method of sorting bls entries
by version field and uses it as default one. If sorting by version
fails, then it falls back to the most robust method of sorting by
file names
Signed-off-by: Eduard Shishkin <edward6@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
It is used by the next patch.
Specifically, ->filter() and ->sort() callbacks of the scandir(3)
accept only short names of directory entries to be filtered/sorted,
while we need to know absolute names to perform filtering/sorting.
Signed-off-by: Eduard Shishkin <edward6@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The problem can happen when dfi_s390mv_init_gen() returns with an error
code to dfi_init() in dfi.c.
Double free condition occurs on zg_close() call at the end of the
while loop in dfi_init() if zg_close() has already been called for the
same file handle at the end of open_dump() function in scope of
dfi_s390mv_init_gen() processing.
This global file handle is not closed during init() call for any
other dump formats. Since it is not reopened/reused after open_dump() call
during multi-volume dump initialization, we should not close it at all.
The problem can be reproduced in the following steps:
1) Install multi-volume dump tool
# zipl -M mvdump.conf
Dump target: 2 partitions with a total size of 4732 MB.
Warning: All information on the following partitions will be lost!
/dev/dasdb2
/dev/dasdb3
Do you want to continue creating multi-volume dump partitions (y/n)?y
Done.
2) Run zgetdump -i using device (not partition) as a parameter without
taking actual dump.
# zgetdump -i /dev/dasdb
free(): double free detected in tcache 2
Aborted (core dumped)
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
With "zpcictl --reset DDDD:BB:FF.F" now causing a fully Linux driven
reset where the Linux kernel does an explicit device driver unbind,
disable and re-enable, let's also expose a way to instead have firmware
perform a device reset by issuing an SCLP with SCLP_ERRNOTIFY_RESET.
When firmware is done resetting the device it will then issue an error
notification with PCI Error Code 0x3a indicating successful reset, which
will subsequently cause the new kernel based automatic recovery
mechanism to perform recovery in coordination with the device driver.
This allows resetting devices without unbinding them from their device
driver and thus without losing related block devices or network
interfaces. This may also be used to test the automatic recovery
mechanism.
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Currently "zpcictl --reset DDDD:BB:FF.F" issues an SCLP call with
SCLP_ERRNOTIFY_AQ_RESET followed by a Linux driven device reset via the
recover sysfs attribute. The latter was introduced with commit
bc0d40c580 ("zpcictl: Initiate recover after reset") because the
firmware driven reset leaves the device in the error state. Now with the
addition of transparent PCI recovery however the situation has changed
as Linux will not leave the device in the error state after the reset
but will instead initiate its automatic recovery flow. With that however
the two mechanisms, automatic PCI recovery and the zpcictl triggered
recovery attribute handler will race against each other.
In practice this is harmless as the automatic recovery is serialized
with the recover attribute and whichever wins the race will do the reset.
The losing side will detect that the original device was removed and
will refrain from causing a double reset.
Letting both mechanisms race against each other is not predictable
behavior though so instead of SCLP_ERRNOTIFY_AQ_RESET issue
a SCLP_ERRNOTIFY_AQ_REPORT_ERROR that will report a device error to the
Support Element but not cause a reset and then predictably reset via the
recover sysfs attribute. If instead a firmware driven reset followed by
the automatic recovery flow is desired the new "--reset-fw" option may
be used.
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The default issuer check may fail if the to-be-verified host key
document was issued and signed by an entity not known at the point
in time check_hostkeydoc was released.
In order to allow verification of the chain of trust for an unknown
but otherwise valid issuer, check_hostkeydoc can be called with
the -d command line option.
This commit also enhances the help text by briefly describing the
command line options and fixes a typo.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
While the original default issuer's organizationalUnitName (OU)
was defined as "IBM Z Host Key Signing Service", any OU ending
with "Key Signing Service" is considered legal.
Let's relax the default issuer check by stripping off characters
preceding "Key Signing Service".
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The re-enciphering of EP11 asymmetric secure keys does not work.
First, the result of the re-encipher operation of the private key
part must be copied back into the user supplied key token buffer.
Second, the public key part, i.e. the MACed SubjectPublicKeyInfo
(SPKI) structure must also be re-enciphered (i.e. re-MACed), since
the MAC is calculated with the EP11 master key.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Remove the DigiCert root CA pinning. The root CA used for the chain of trust can
change in the future therefore let's remove this check. If someone wants to
enforce the usage of a specific root CA it can be selected by the genprotimg
command line option `--root-ca $CA`. Make it transparent to the user which root
CA is actually being used by printing the subject name of the root CA to stdout
in verbose mode.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Acked-by: Viktor Mihajlovski <mihajlov@linux.ibm.com>
Reviewed-and-tested-by: Nico Boehr <nrb@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Some development kernel versions provide an 8-digit date number like
"20220325" in place of the second kernel sublevel, while the data
format used to send this information to the HMC only supports 16 Bit
numbers. As a result, the HMC displays a seemingly random sublevel
number.
Fix this by replacing excessive sublevel numbers with 0 to ensure that
these numbers are handled consistently.
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Hitting CTRL-D anywhere will cause fdasd to go into an endless loop
displaying the main menu over and over again. Killing fdasd (e.g.
via CTR-C) is the only way out.
The issue is that read_line() is just ignoring the resulting EOF
condition on stdin. Subsequent invocations of read_line() will return
immediately and thus cause the loop. A simple fix is to reset stdin
after EOF. A caller of read_line() will see the same behavior as for
EOL with no input.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This can now include /lib/modprobe.d/10-unsupported-modules.conf
Strictly speaking, modprobe would only consider *.conf files inside
those directories, but for consistency with the already existing
collection of /etc/modprobe.d instead of /etc/modprobe.d/*.conf,
do the same for the added missing locations.
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Recent multipath-tools can depend on this.
a1eabea75e
("multipathd.service: drop ExecStartPre for loading dm-multipath")
92f0893ac1
("multipath-tools: install modules-load.d/multipath.conf")
This can now also include /usr/lib/modules-load.d/s390-pkey.conf
Complements v2.8.0 commit
dffd41943e ("pkey: Support autoloading kernel pkey module").
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The target field is required for IPL sections, but the ones populated from
BLS snippets did not have this field. This was only working when using BLS
snippets because IPL sections inherit the target field with "defaultauto".
But that's not the case when using a menu, for example the following zipl
configuration will fail if it's used along with BLS defined IPL sections:
fail when running the zipl tool:
[defaultboot]
defaultmenu = menu1
:menu1
target = /boot
1 = linux
2 = test
default = 1
prompt = 1
timeout = 0
Because "linux" and "test" will be defined using BLS snippets and these
don't have an option to define target fields. Let's make these to always
inherit a target field, either from the [defaultboot] section or a menu
section if there's a defaultmenu defined.
Fixes: https://github.com/ibm-s390-linux/s390-tools/issues/111
Closes: https://github.com/ibm-s390-linux/s390-tools/pull/113
[hoeppner@linux.ibm.com: Fixed a couple of style issues]
Reported-by: Renaud Métrich <rmetrich@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Tested-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Now that we've concluded that the compiler is used for calling the actual
linker, it doesn't make much sense to select a different compiler for linking.
Even worse, it's prone to error. A naive user might try to compile s390-tools
using clang as follows:
$ make -C genprotimg CC=clang
...
CC genprotimg/src/utils/curl.o
LINK genprotimg/src/genprotimg
/usr/bin/ld: genprotimg.o: `stderr@@GLIBC_2.2' non-PLT reloc for symbol defined in shared library and accessed from executable (rebuild file with -fPIC ?)
/usr/bin/ld: final link failed: bad value
collect2: error: ld returned 1 exit status
Therefore it makes sense to use the same compiler for linking as well.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Acked-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Remove NO_PIE_LINKFLAGS and follow the naming convention by using
LDFLAGS for linker flags. Replace all occurrences accordingly.
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The "detour" with NUL terminated records ensures that sorting
works as expected for environment variables with values containing
one or more lines and thus '\n' as regular record separator.
Reviewed-by: Joern Siglen <siglen@de.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Make use of multipath-tools 0.8.9 commit
("libmultipath: add %L path wildcard for 64-bit hex LUN")
260d7cb411 .
Multipath-tools versions that do not know the format wildcard simply
ignore it and expand to an empty string, so it's backwards compatible.
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Eases mapping of multipath paths and FCP by-path information
without having to use different tool output and correlate,
such as "multipathd -k'show topo'" and "lszfcp -D".
Possibly the HBA is reported as "[undef]" for zfcp
[without multipath-tools 0.8.9 commit
("libmultipath: support host adapter name lookup for s390x ccw bus")
852a1dfd94 ]
and the FCP LUN needs to be manually converted from the SCSI LUN in h:c:i:l.
While at it, append correlation information for block device name and
major:minor, as well as all information from a standard 'show paths',
which is the path state 3-tuple and next_check,
plus the number of path failures.
Example output:
$ multipathd -k'show paths format "%w|%a|%r|%p|%i|%d|%D|%t|%T|%o|%0|%C"'
uuid |host adapter|target WWPN |pri|hcil |dev|dev_t|dm_st |chk_st|dev_st |failures|next_check
3600507640081818ab00000000000025e|[undef] |0x500507680b2581fa|10 |0:0:0:606|sdb|8:16 |active|ready |running|0 |XXXXXX.... 13/20
3600507640081818ab00000000000025e|[undef] |0x500507680b2581fb|50 |0:0:1:606|sdc|8:32 |active|ready |running|0 |XX........ 4/20
3600507640081818ab00000000000025e|[undef] |0x500507680b2681fa|10 |1:0:0:606|sdd|8:48 |active|ready |running|0 |XXXX...... 8/20
3600507640081818ab00000000000025e|[undef] |0x500507680b2681fb|50 |1:0:1:606|sde|8:64 |active|ready |running|0 |XXXXXXX... 15/20
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The new option -s, long --serial shows the serial numbers of
CCA and EP11 cards.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
New options:
--cardonly
--queueonly
which filter the output to show only card or queue information.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
New options:
--accelonly
--ccaonly
--ep11only
which restrict the output to only cards/queues with the given mode.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Newer kernel show a sysfs attribute chkstop which displays
the checkstop state of a crypto card. This patch enables
support for lszcrypt to display the checkstop state.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
If there is a max_msg_size attribute for the card
the lszcrypt -c option will show this limit as
AP bus max message size limit xx Kb
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
On several distributions `pandoc` is not available via the default
repositories, and thus not available in the build environments for the
distribution packages. That means, the man page can't be bundled along
with the packages generated for those distributions.
But since this is a valuable asset for some users, instead of requiring
`pandoc` in order to have a man page be generated during the build, so it
can be installed, bundle a pre-cooked version that corresponds to the
current version of the `README.md` file. This way, the man page can always
be packaged, and is now always installed, even if `ENABLE_DOC` is set to
`0` (the default).
This also means, whenever the `README.md` file is changed, the bundled
man page needs to be regenerated, so it stays in sync. As a safeguard
we also add a checksum of the `README.md` file that is regenerated along
with the man page. This checksum is tested even when `pandoc` is not
available, and the user is notified whenever it runs out of sync (with a
hint as to how to remedy it).
Nothing changes for the compile/installation workflow, if `ENABLE_DOC` is
set to `1`.
Suggested-by: Jens Remus <jremus@linux.ibm.com>
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Sometimes dumping a virtual machine from the outside is the only way to
get the data that is needed. This can be the case if a dumping mechanism
like kdump hasn't been configured or data needs to be fetched at a
specific point. Dumping a protected guest from the outside without help
from FW/HW doesn't yield sufficient data to be useful. Hence we now
introduce Protected Virtualization (PV) dump support.
The PV dump support works by integrating the firmware into the dump
process. New Ultravisor calls are used to initiate the dump process,
dump cpu data, dump memory state and lastly complete the dump process.
The guest's data is fully encrypted and can only be decrypted by the
entity that owns the customer communication key for the dumped guest.
Also dumping needs to be allowed via a flag in the SE header.
This patch adds support for PV guest dumps to genprotimg. To prepare a
PV image in order that the PV guest can later be dumped from the
outside, the user has to provide a customer communication key used for
the dump process and he has to set the corresponding control flag. For
specifying the customer communication key a new command line option
`--comm-key` is added and for enabling/disabling the control flag the
command line options `--enable-dump` and `--disable-dump` are added.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Acked-by: Viktor Mihajlovski <mihajlov@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Declare `--enable-pckmo` and `--disable-pckmo` as mutually exclusive.
Let's define a helper macro for this which allows an easier definition
of mutually exclusive command line flags.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Introduce a private macro for the calculation of the control flags and
sort the flags by bit value.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Debian carried a patch forever that allowed zipl to run even if not all
menu items had files attached. If a required file is missing for an
entry (e.g. vmlinuz.old or initrd.img.old) and it is marked as
"optional" in the config, the section will be skipped. This allows
zipl to install after bootstrapping, as booting on s390 still relies
on the kernel/initrd symlinks in the root directory.
Closes: https://github.com/ibm-s390-linux/s390-tools/pull/2
Signed-off-by: Philipp Kern <pkern@debian.org>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
[sth@linux.ibm.com: adapted patches to latest changes, merged patches]
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This commit makes zgetdump work with /dev/mem again.
zg_seek() should not attempt to verify the given offset for devices before
issuing lseek() because special devices like /dev/mem report 0 in
stat.sb_size.
$ zgetdump -i /dev/mem
zgetdump: Trying to seek past file end "/dev/mem"
Fixes: 11e78cada5 ("zdump: catch attempts to seek past end of file in zg_seek()")
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This change will group the commands executed for block and scsi devices
into a section with a comment.
By grouping, we intend to enhance the handling in our runtime.out file
and help to understand the purpose of command groups.
In addition we did get feedback for promoting some commands to the top.
Signed-off-by: Joern Siglen <siglen@de.ibm.com>
Reviewed-by: Sa Liu <saliu@de.ibm.com>
Reviewed-by: Mario Held <mario.held@de.ibm.com>
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This change will group the commands executed for Z device subsystem
into a section with a comment.
By grouping, we try to enhance the handling in our runtime.out file and
help to understand the purpose of command groups.
In addition we did get feedback for promoting some commands to the top.
lspci -t was added on request of SMEs during the discussions
Signed-off-by: Joern Siglen <siglen@de.ibm.com>
Reviewed-by: Sa Liu <saliu@de.ibm.com>
Reviewed-by: Mario Held <mario.held@de.ibm.com>
Acked-by: Nicklas Schnelle <Niklas.Schnelle@ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This change will group the commands executed for overall state into a
first section with a comment.
By grouping, we intend to enhance the handling in our runtime.out file
and help to understand the purpose of command groups.
In addition we did get feedback for promoting some commands to the top.
Signed-off-by: Joern Siglen <siglen@de.ibm.com>
Reviewed-by: Sa Liu <saliu@de.ibm.com>
Reviewed-by: Mario Held <mario.held@de.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This change will group the commands executed for crypto, special SW or
specific for a distro into sections with a comment.
By grouping, we intend to enhance the handling in our runtime.out file
and help to understand the purpose of command groups.
Signed-off-by: Joern Siglen <siglen@de.ibm.com>
Reviewed-by: Sa Liu <saliu@de.ibm.com>
Reviewed-by: Mario Held <mario.held@de.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This change will group the commands with long output into two
sections with a comment.
By grouping, we intend to enhance the handling in our runtime.out file
and help to understand the purpose of command groups.
We did get feedback for moveing some independent long output files to
the end for speed up the scrolling in the upper parts.
Files which already have a separate output file are bundled in a
separate group at the end.
Signed-off-by: Joern Siglen <siglen@de.ibm.com>
Reviewed-by: Sa Liu <saliu@de.ibm.com>
Reviewed-by: Mario Held <mario.held@de.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This change will regroup & reorder the commands executed for network.
By grouping, we intend to enhance the handling in our runtime.out file
and help to understand the purpose of command groups.
In addition we did get feedback for promoting some commands to the top.
"ip -br a" was added on request of SMEs during the discussions
Signed-off-by: Joern Siglen <siglen@de.ibm.com>
Reviewed-by: Sa Liu <saliu@de.ibm.com>
Reviewed-by: Mario Held <mario.held@de.ibm.com>
Acked-by: Sandy Winter <WINTERA@de.ibm.com>
Acked-by: Stefan Raspl <stefan.raspl@de.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
When lshwc is invoked with
# ./lshwc -a :P
lshwc: ioctl S390_HWCTR_START: Invalid argument
#
it returns an error instead of listing all problem state counters
of all online CPUs. The reason is an empty CPU list when it is
omitted and only a counter set is specified. Fix this.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
With the introduction of libcpumf/libcpumf.a library there is no need
for this file anymore. Its defines have been moved to
include/lib/libcpumf.h are obsolete.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add a function to detect the existence of the CPU Measurement Sampling
Facility on a system.
Add a function which extracts the CPU Measurement Sampling Facility
characteristics on a system, such as
- minimum sample speed
- maximum sample speed
- current CPU speed
- basic sample size in bytes
- diagnostic sample size in bytes
Add a function to detect the existence of the CPU Measurement Sampling
Facility on a system and return the current sampling buffer management
characteristics, such as:
- minimum supported sampling buffer size
- maximum supported sampling buffer size
Add a function to detect the existence of the CPU Measurement Counting
Facility on a system.
Add a function which extracts the CPU Measurement Counting Facility
characteristics on a system, such as
- counter first version number
- counter second version number
- counter set authorization level
Add a function the returm the PMU type number of a CPU Measurement
Facility device driver. These numbers may vary between boots.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
'which' tool is packaged separately from other core tools and there will
likely be scenarios where this check will fail because 'which' is
unavailable.
The "type" is builtin itself and should solve this problem.
For a built in command, we will not suppress error out -> removing 2>&1.
On this replace - in call_run_command - get cmd_type as variable only once
Reported by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Joern Siglen <siglen@de.ibm.com>
Reviewed-by: Mario Held <mario.held@de.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
a missing dump2tar command did show misleading error messages
now check it and give clear messages
Signed-off-by: Joern Siglen <siglen@de.ibm.com>
Reviewed-by: Mario Held <mario.held@de.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
as order itself does not matter for collection of log and config files,
we decided to use alphabetic order for better maintenance
Signed-off-by: Joern Siglen <siglen@de.ibm.com>
Reviewed-by: Mario Held <mario.held@de.ibm.com>
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
critical paths in dump2tar data collection have been already excluded -
this update will sync the excludes in the fall back, running in case
dump2tar is missing or failing on a system
By this we also sync the filtering to match exact the same pattern.
Reported by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Joern Siglen <siglen@de.ibm.com>
Reviewed-by: Sa Liu <saliu@de.ibm.com>
Fixes: 12c84469fd ("dbginfo.sh: exclude reading page_idle/bitmap sysfs
attribute")
Fixes: b627b8d8e1 ("Initial s390-tools-2.0.0 import")
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
adopt all indents to have the same setting overall - NO logic changes !
tooling: vim used with setting "shiftwidth=8",expandtab,autoindent
commands "gg=G",":retab"
some additional line brakes to stay below 100 chars
and one line added manual before "collect_procfs"
Signed-off-by: Joern Siglen <siglen@de.ibm.com>
Reviewed-by: Mario Held <mario.held@de.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
chzdev fails to generate correct cio_ignore udev-rules for a CCW device
with device number 0xffff. Also chzdev aborts due to a segmentation
fault when a CCW device with CSSID 0xff is configured. Both issues are
caused by off-by-one errors while interpreting CCW device ID limits
CSSID_MAX, SSID_MAX and DEVNO_MAX.
Fix these errors by correctly interpreting CCW device ID limits.
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The endianness handling is already done before, so there is no need for
this function. Let's remove the useless `uint64_to_uint8_buf` function.
Suggested-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Currently, a device type setting being --removed from both the active and
persistent configuration via 'chzdev -t' can result in a scenario where
the setting is not removed from the active configuration (and an error
message is presented) but chzdev still proceeds to remove the setting from
the persistent configuration.
Update this logic so that devtype_remove_settings behaves the same way as
device_remove_settings and only perform the removal when no errors are
encountered.
Reported-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Jason J. Herne <jjherne@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Extend cpictl to report Linux distribution type and version information,
and another sublevel of Linux kernel version data via the system level
field of the SCLP CPI firmware interface. This data is intended to be
decoded by the IBM Z HMC web-UI to provide users a more detailed view of
Linux software levels installed in LPARs.
For this purpose, the format of the 64-bit system level word is extended
in a compatible way, that is, the meaning of existing fields remains
unchanged while additional data is added to previously unused fields.
The new format is defined as 0xabccddeeeeffgghh, where:
- a=statistics flags
- b=distro id
- c=distro major version
- d=distro minor version(s)
- e=kernel sublevel 2
- f=kernel version
- g=kernel patchlevel
- h=kernel sublevel 1
This format will be automatically reported for supported distributions
based on data from /etc/os-release. As before, users can override the
data by specifying a custom system level word in /etc/sysconfig/cpi.
To support manual specification of new data fields, the format of
cpictl's -L command line option and the CPI_SYSTEM_LEVEL environment
variable are extended as follows:
- 0x<level>
Specifies the system level as 64 bit hex value
- [[[flags:]distro_id:distro_version:]kernel_version]
Specifies the system level as list of optional fields. Any field that
is omitted is initialized with automatically determined values.
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Acked-by: Viktor Mihajlovski <mihajlov@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
In the past s390 used a fixed command line length of 896 bytes. This has
changed with newer Linux kernels. There is now a parm area indicating
the maximum command line size. This parm area has always been
initialized to zero, so with old kernels this field would read zero and
we must then assume that only 896 bytes are available.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
EditorConfig (https://editorconfig.org/) defines a file format for
defining coding styles. The most common editor do either provide native
support or via plugin support for EditorConfig.
This patch adds an EditorConfig configuration for s390-tools.
Acked-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
zdev provides path resolution logic to determine which z-specific
devices contribute to the file system mounted at a specific mount point.
This logic is used by command-line option --by-path, but also to
determine the list of devices needed to enable the root file system.
Path resolution fails when a device provides multiple mount points such
as, for example, when using btrfs subvolumes, or when mounting the same
file system at multiple mount points. The failure is caused by zdev
relying on the MOUNTPOINT attribute of lsblk's output which only
contains a single mount point.
Fix this by making use of lsblk's MOUNTPOINTS attribute that contains
the full list of mount points. Note that MOUNTPOINTS was only introduced
with util-linux v2.37, therefore a fall-back to the old format is
needed.
Fixes: https://github.com/ibm-s390-linux/s390-tools/issues/129
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Eduard Shishkin <edward6@linux.ibm.com>
Reported-by: Dan Horák <dan@danny.cz>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
lshwc allows to specify a list of CPUs, for example
# ./lshwc -a 2-3,66-68:b
Date,Time,CPU,CPU_CYCLES(0),INSTRUCTIONS(1),L1I_DIR_WRITES(2),....
2022-01-21,12:51:54,CPU2,68762,20999,283,14157,601,87255
2022-01-21,12:51:54,CPU3,70514,21179,288,10654,586,90188
2022-01-21,12:51:54,CPU4,48504,21018,141,7831,438,78494
2022-01-21,12:51:54,Total,187780,63196,712,32642,1625,255937
#
However, as seen on the output, the CPU list is incorrect. It shows
CPUs 2, 3 and 4 even when only CPU 2 and 3 was requested. CPUs 66, 67
and 68 have not been online and can not be displayed.
What happens is a wrong parameter conversion for the device driver.
CPUs 66, 67 and 68 are passed to the device driver as CPUs 2 3 and 4
and that data is returned.
Fix this and submit a CPU list with correct bit ordering:
# ./lshwc -a 2-3,66-68:b
Date,Time,CPU,CPU_CYCLES(0),INSTRUCTIONS(1),L1I_DIR_WRITES(2),...
2022-01-21,12:59:18,CPU2,50753,18042,246,10972,494,60345
2022-01-21,12:59:18,CPU3,54002,20390,232,9219,511,66033
2022-01-21,12:59:18,Total,104755,38432,478,20191,1005,126378
#
Reported-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Fix Sparse findings like:
warning: symbol 'hash_table_find' was not declared. Should it be static?
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Since version 2.37.x, with the commit 58b510e58 ("libsmartcols: sanitize
variable names on export output"), util-linux changes the output
characters of lsblk, where the ":" is replaced with an "_". Align the
lsblk output parser function in lszdev as per this change.
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Suggested-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reported-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Tested-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add a prophylactic check that @filename is not NULL before its
dereference.
This addresses the following warning (which is a false positive,
since stat(2) is never called with NULL file name):
job.c:514:13: warning: argument 1 null where non-null expected
[-Wnonnull]
514 | if (stat(filename, &stats)) {
| ^~~~~~~~~~~~~~~~~~~~~~
In file included from /usr/include/features.h:488,
from /usr/include/errno.h:25,
from job.c:13:
job.c: In function 'check_job_ipl_data':
/usr/include/sys/stat.h:227:12: note: in a call to function
'stat' declared 'nonnull'
227 | extern int __REDIRECT_NTH (stat, (const char *__restrict __file,
Fixes: https://github.com/ibm-s390-linux/s390-tools/issues/127
Reported-by: Mario Held <mario.held@de.ibm.com>
Signed-off-by: Eduard Shishkin <edward6@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Under certain conditions, e.g. in a KVM guest, a write operation
to /sys/firmware/cpi/set can result in an error message to
stderr while the script returns with a zero exit code, indicating
success.
This can cause confusion if cpictl is called by systemd due to
the existence of a writable /sys/firmware/cpi/. Let's silence
cpictl when writing to the /sys/firmware/cpi/set. This is OK, as
nothing can be inferred from failure or success from the perspective
of the invoking Linux instance.
Fixes: https://github.com/ibm-s390-linux/s390-tools/issues/120
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The maximum command line length is now dependent on the kernel image
that is loaded. Therefore move the check to check_common_ipl_data().
This function now reads the new kernel image, and check whether the
command line length is in the allowed range.
The command line size limit in zipl is now set to 64k, which is hopefully
enough.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
There are two places where we check whether the initrd and kernel image
is readably. Add one helper function that checks this. This is also a
preparation for the extended command line handling, so that we have to
add that code in only one location.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
There are quite a few places that do:
if (section == NULL) {
error_text("file '%s'", file);
} else {
error_text("file '%s' in section '%s'", file, section);
}
Add a helper function to deduplicate that.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Most of get_*_components() and finalize_*_address_data() is the same
for normal ip, tape and dump types, so we can unify that.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add a small helper function to free the common ipl data to avoid
having the same code duplicated multiple times. Also remove the if()
check before the free as it is allowed to pass NULL pointers to free().
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Each ipl type takes at least a kernel image, parameter line and initrd
parameter. This is duplicated all over the place in the current
implementation. To simplify this, add struct job_common_ipl_data which
will hold this data.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This adds support for long command lines. The boot loader stages
will no longer use a fixed limit when copying the command line, but
will use the maximum length from the kernel image that is being loaded.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The assembly code in tape0.S loads the kernel from tape to offset 0x4000.
After loading the kernel it loads the parm file and stores it to the
address provided by zipl. zipl doesn't know about the 0x4000 load offset,
so this address is inside of the kernel image and will silently corrupt
the loaded image in memory.
Fix this by copying the kernel to the final destination before loading
the parm files and initrd. We can do this because we can strip the first
0x10000 bytes like the zipl C code does for non-tape IPL.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
No need to use memcpy() and carry the length around all the time.
Switch to using strlcpy() to simplify the code.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Compiling against fuse3 shows 'incompatible pointer type' warnings due
to the additional function arguments in the new API.
Therefore, adjust the declarations of zdsfs_getattr() and
zdsfs_readdir() to match.
GitHub-ID: https://github.com/ibm-s390-linux/s390-tools/pull/117
Signed-off-by: Graham Inggs <ginggs@debian.org>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Compiling against fuse3 shows 'incompatible pointer type' warnings due
to the additional function arguments in the new API.
Therefore, adjust the declarations of hmcdrv_fuse_getattr(),
hmcdrv_fuse_readdir() and hmcdrv_fuse_init() to match.
GitHub-ID: https://github.com/ibm-s390-linux/s390-tools/pull/117
Signed-off-by: Graham Inggs <ginggs@debian.org>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Compiling against fuse3 shows 'incompatible pointer type' warnings due
to the additional function arguments in the new API.
Therefore, adjust the declarations of cmsfs_getattr(), cmsfs_readdir(),
cmsfs_utimens(), cmsfs_rename() and cmsfs_truncate() to match.
GitHub-ID: https://github.com/ibm-s390-linux/s390-tools/pull/117
Signed-off-by: Graham Inggs <ginggs@debian.org>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
When `make install` is called with parallel execution enabled (e.g.:
`-j2`), the dependencies for the necessary directories are not correct.
The `install` target depends on `install_dirs`, which creates the
necessary directories, and needs to run before any of the
`chreipl-fcp-mpath-install*` targets that have prerequisites on these
directories; but the `chreipl-fcp-mpath-install*` targets have
indirectly the same "hierarchy level" as `install_dirs`, and no direct
dependency on it.
Simplified it looks like this:
install: install_dirs chreipl-fcp-mpath-install
chreipl-fcp-mpath-install: chreipl-fcp-mpath-install-udev-rules ...
This works fine with only one job, as `install_dirs` will be satisfied
first, before recursing into any other branch of the dependency tree.
But if we have more than one job, there is nothing in the rules that
prevents Make from working on both branches - `install_dirs` and
`chreipl-fcp-mpath-install` - at the same time, and so
`chreipl-fcp-mpath-install-udev-rules` might run before `install_dirs`,
and end up with a unsatisfied dependency:
make[2]: *** No rule to make target '/usr/lib/udev/rules.d', needed by 'chreipl-fcp-mpath-install-udev-rules'. Stop.
Fix this by adding direct dependencies on `install_dirs` for all the
directory prerequisites of `chreipl-fcp-mpath-install*` targets. This
way Make will need to satisfy `install_dirs` before it can work on any
of the other targets, and so the necessary directories will be created
in the correct order.
Reported-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Tested-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This fixes the sparse warning:
utils/crypto.c:443:68: warning: Using plain integer as NULL pointer
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This change allows mocking of print macros in unit tests.
Being able to do this in unit tests, enables us to catch output from
zgetdump functions and test it.
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
_zg_err_errno() should save the current errno value before calling any
libc functions because they could change it. Failing to do so, may result
in _zg_err_errno() displaying an incorrect error message.
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This change allows mocking of error/abort macros in unit tests.
Being able to do this in unit tests, enables us to test error conditions w/o
terminating the unit test runner.
The new error functions do not have "noreturn" attribute because
this would make mocking of them in unit tests impossible. We must not
compile these functions as noreturn because we need to return from them
in unit tests and returning from a noreturn function is an undefined
behavior in the C++ standard!
For more details:
- ISO/IEC 14882:2017, Chapter 10.6.8 "Noreturn attribute""
- https://en.cppreference.com/w/cpp/language/attributes/noreturn.
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
It is unusual to write the file output from a tool to stdout. Therefore
add a positional argument to the zgetdump convert action where the
output file can be specified. If no positional argument is given the
output is written to stdout as before and therefore there is no change
in the default behavior.
If the file output already exists an error is returned. The reason for
this is to avoid the situation where an existing dump is accidentally
overwritten by the user.
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The keyword extern before a function declaration is not required with
modern C compilers.
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The primary goal of this change is to split DFO ELF module into
multiple smaller ones for better unit testability.
The change doesn't introduce any functionality changes, just shuffling code
around.
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The primary goal is to separate DFO code into multiple smaller modules
and make it unit testable.
This refactoring only moved the code around w/o changing any functionality.
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Without the fix, readers of syslog / systemd-journal can erroneously
think that dbginfo.sh was incomplete because the last logged step is
"17 of 18".
The fix also makes the missing line appear in dbginfo.log inside the
generated DBGINFO....tgz.
s390-tools v2.17.0 commit b7807d0195 ("dbginfo.sh: Add KVM commands
and rework data collection") turned create_package into a numbered
step.
Snippet of terminal output:
...
17 of 18: Postprocessing
18 of 18: Finalizing: Creating archive with collected data
Collected data was saved to:
>> /tmp/DBGINFO-....tgz <<
Please review all collected data before sending to your service organization.
Syslog before:
...
dbginfo.sh[...]: 17 of 18: Postprocessing
dbginfo.sh[...]: Data collection completed
Syslog after:
...
dbginfo.sh[...]: 17 of 18: Postprocessing
dbginfo.sh[...]: 18 of 18: Finalizing: Creating archive with collected data
dbginfo.sh[...]: Data collection completed
Fixes: b7807d0195 ("dbginfo.sh: Add KVM commands and rework data collection")
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Remove the call to `gzip` before installing the manpage during the
`make install` call. What and if compression is done should be handled by
the distribution tooling.
This also removes a dependency for the build process.
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
`chreipl-fcp-mpath-common.sh.in` is never executed, only used as argument
for `source` in the udev helper scripts, so the shebang is unnecessary, and
might be confusing.
Also, tools like `rpmlint` from the rpm software management will complain
about this; e.g.:
s390-tools-chreipl-fcp-mpath.s390x: W: non-executable-script /usr/lib/chreipl-fcp-mpath/chreipl-fcp-mpath-common.sh 644 /bin/bash
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
...to make clear why `off` is initialized to 0 and that all calls to
`dfo_chunk_add` occur for the same reason. For consistency reasons adapt
the `off` value calculation as well.
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Rename the parameter `ptr` of `notes_init` to something meaningful. Since
it points to the start of the notes segment rename it to `segment_start`.
In addition, improve the documentation for the function.
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Use `mem_chunk->size` instead of recalculate it. In addition, assign
`p_vaddr` to `p_paddr` to make clear that they must be equal and rename the
parameter `load_offset` to `elf_offset` to make clear that the offset in
the ELF vmcore file is meant. Finally rename `loads_init` to
`load_phdrs_init`.
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This cast makes the macros easier to use without getting compiler warnings.
e.g.
dfo_elf.c: In function 'dfo_elf_init':
dfo_elf.c:343:20: warning: assignment to 'Elf64_Phdr *' from incompatible pointer type 'char *' [-Wincompatible-pointer-types]
343 | phdrs_load = PTR_ADD(phdr_notes, sizeof(Elf64_Phdr) * phdrs_notes_count);
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
With gcc < 8.1 the following compile error occurs:
lshwc.c:52:37: error: initializer element is not constant
static unsigned int read_interval = ioctlsleep, cfvn, csvn, authorization;
^~~~~~~~~~
Even though this gcc bug was fixed in gcc 8.1+, change the constant
definition to a #define to make the tool compile with older compilers as
well.
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=69960
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=66618
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add a README.md for chreipl-fcp-mpath and infrastructure to build and
install a man page generated from the README.md. Building and installing
of the man page is only done when supplying the make option `ENABLE_DOC=1`
(per default disabled). The `pandoc` utility is used to build the man page.
The README.md is reused since there is no other tool or command as part of
chreipl-fcp-mpath that needs to be documented in a separate man page.
Also add information about chreipl-fcp-mpath to the main README.md and
CHANGELOG.md.
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add a dracut configuration file that might optionally be installed along
with the toolset (per default to: $(USRLIBDIR)/dracut/dracut.conf.d). It
causes the udev rules and helper scripts to be included into an initial
ramdisk, when (re-)built with dracut; along with any dependency.
This is only done when passing `HAVE_DRACUT` set to 1 during the
installation (default is 0), e.g.: make install HAVE_DRACUT=1.
Enabling the toolset during the initial ramdisk phase has the advantage
that paths can be audited earlier in the life cycle of this Linux
runtime, e.g. to record the WWID in the ID-file.
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
In the final step of the udev rules toolset, we either know that the
current event subject is the re-IPL target, a dm-multipath device with
the re-IPL target, or represents the same volume based on its WWID. As
such it is a candidate to replace the current re-IPL target.
The new helper `chreipl-fcp-mpath-try-change-ipl-path` will use the
subject itself - in case it is a single scsi disk -, or the dm-multipath
device, to test whether there is a path in a good state.
"Good state" is based on the zfcp device driver state
(<SDEV>/zfcp_failed, <SDEV>/zfcp_in_recovery), the scsi_transport_fc
port state (<SDEV>/../../fc_remote_ports/rport-*/port_state), and the
scsi device state (<SDEV>/state). A path is only considered if they all
indicate a device in good conditions.
If such a path is found, the helper will try to set it as new re-IPL
target regardless of whether the current re-IPL is still in good shape
or not. This is by design, and done to reduce complexity in further
state checking, and prevention of races with overlapping events in udev
(when executing in parallel workers).
Whenever a new re-IPL target is selected and set in
/sys/firmware/reipl/fcp/{device,wwpn,lun}, the helper will also update
the records in the ID-file - otherwise they might appear as stale, when
they aren't.
This step in the udev rule processing might also result in log messages
written to the syslog (using the utility `logger` from util-linux;
writing to /dev/log).
In case the re-IPL target is changed, a message with level notice is
logged, informing about the new target.
In case no good path is found as part of a dm-multipath device, a
message with level critical is logged, as it might result in a failed
re-IPL if no path is available.
Lastly, when changing the information in /sys/firmware/reipl/fcp/ fails
for whatever reason, a message with level alert is logged, as the
written information might be inconsistent and must be audited/corrected
manually by an operator.
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
When the first test, whether the current event subject represents the
re-IPL target failed, we attempt a second test, using the recorded WWID
of a previously successful attempt.
The new helper `chreipl-fcp-mpath-is-ipl-vol` utilizes the information
previously stored in the ID-file (read under lock via `flock`).
The recorded WWID is compared with the one of the event subject; if it
matches we know that it addresses the same volume, and might be used as
alternative re-IPL target.
Additionally we also compare the current re-IPL triplet with the one
recorded in the ID-file. If it doesn't match anymore, we assume the
recorded WWID is stale - e.g., because the operator changed the re-IPL
target manually - and the previous check invalid.
If both the WWID match, and the re-IPL triplet is still the same as
previously recorded, the toolset may continue with the subject, and use
it as replacement for the current re-IPL target.
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
When built with `D=1` chreipl-fcp-mpath automatically creates debug data
for the helpers that run during udev event processing. This is the only
way to effectively debug what is happening during event processing in
chreipl-fcp-mpath.
Collect this data under its default path in /run/udev/.
Also collect the chreipl-fcp-mpath statefile which contains WWID, Device
Bus-ID and LUN of the last path that was detected to represent a FCP
re-IPL device.
Suggested-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
When we have identified the current event subject to represent the
re-IPL target, we record its WWID for future identification in a
stateful ID-file (per default: /run/udev/chreiplzfcpmp-ipl-volume-id). In
addition to the WWID, we also record the current re-IPL triplet
(<Dev-Bus-ID>:<WWPN>:<LUN>), so that when that changes - e.g. due to an
operator manually changing the re-IPL target -, we know that the
recorded WWID is stale.
This record may be used in cases when the current re-IPL target is
completely gone from the system, so we can't used it as comparison
object for when events arrive for paths that go to the same volume, but
don't have the same I_T_L nexus. They however have the same WWID. We
may use these (new) paths as replacement for the one that is completely
gone.
The new helper `chreipl-fcp-mpath-record-volume-identifier` uses the
kernel scsi-device attribute `wwid` as source for the WWID (verbatim).
As with reading the re-IPL firmware information, when writing to the
ID-file, a lock is taken via `flock`, to prevent overlapping
writes/reads to the file.
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Now that we know that the system uses s390x IPL and the current re-IPL
target is from FCP, whenever we get a udev event that indicates a path
state changed, we have to figure out whether it affects the path that is
currently set as re-IPL target, or goes to the same volume (so we might
use it as alternative re-IPL path).
Add a new helper `chreipl-fcp-mpath-is-ipl-tgt` for this task.
Based on the information provided in
/sys/firmware/reipl/fcp/{device,wwpn,lun} it figures out whether the
current event subject has the same triplet <Dev-Bus-ID>:<WWPN>:<LUN> (in
T10 SCSI: I_T_L nexus), or whether one of its parts (in case of
dm-multipath) has.
If true, we know for sure, that we deal with an event affecting the
current re-IPL setting, and continue.
When accessing the re-IPL firmware information a lock is taken via the
`flock` utility (from util-linux). This is done so concurrent changes
from the toolset, that are added in a later commit, don't result in
inconsistent reads.
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add second filter stage to the udev rules: only continue with the
toolset, if the system uses s390x IPL and if the current re-IPL target
is from FCP.
For the test, whether the next re-IPL target is planned to be done from
FCP, a helper `chreipl-fcp-mpath-is-reipl-zfcp` is added, and the
information in /sys/firmware/reipl/reipl_type is used.
If either one or both of the tests are not true, the udev rules will
exit.
For debugging, the toolset can be built with the Make variable `D` set
to 1 (e.g.: make D=1; make install D=1). This causes the toolset to
write shell traces of the helper to $(DEBUGOUTDIR) (per default:
/run/udev); otherwise no output is generated. `dbginfo.sh` will be
changed to collect this data automatically.
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add a new tool to s390-tools: chreipl-fcp-mpath. A toolset based on udev
to change the active re-IPL target if the current target goes into an
error-state, due to for example a pulled cable.
Add the base infrastructure consisting of a Makefile and a base set of
udev rules. Integrate the Makefile into s390-tools Make machinery.
The rules filter events base on the event subject type (dm-multipath,
scsi disk), udev action (change, or add), and device mapper action
(path failure, or path reinstated). No further processing is done right
now in case of a match; if neither of these criteria matches, the
rules exit, and the toolset won't be invoked.
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
running mpio data disks with offline paths might cause dbginfo
to hang up on the command "blockdev --report" -> we remove
it to ensure a non blocking data collection.
In addition we add a second kill step with the same timeout
value to retry stopping a command
Signed-off-by: Joern Siglen <siglen@de.ibm.com>
Reviewed-by: Mario Held <mario.held@de.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Always clear the COMMAND_LINE_EXTRA region, also in case sclp_setup()
fails. If the region is not cleared properly, there might be junk
in there after a reboot, causing confusion for the kernel later.
While we're at it, also switch to COMMAND_LINE_EXTRA_SIZE instead
of COMMAND_LINE_SIZE, since that constant is more appropriate here.
Closes: https://github.com/ibm-s390-linux/s390-tools/pull/122
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
With an upcoming patch the output target can be different to `stdout`.
Therefore, the term `ZG_ACTION_STDOUT` is no longer generic enough. In addition,
rename `do_write` to `do_copy` to match the enum name.
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Currently, for some commands (e.g. `zgetdump unmount`) unused positional
arguments are silently ignored, for some commands (`zgetdump mount`) they're
not. Therefore let's fix this by always returning an error message and exit code
if too many positional arguments are given.
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
In case the hsci tool was upgraded on a running system, it can happen
that an hsci interface exists, that was created by an older version of
the tool (and thus has no veth pair). Add support to show and delete
such an hsci interface.
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Without kernel commits
f7936b7b2663 s390/qeth: Update MACs of LEARNING_SYNC device
4e20e73e631a s390/qeth: Switchdev event handler
60bb1089467d s390/qeth: Register switchdev event handler
HSCI cannot be used with multiple MACs, but the single MAC usecase needs
to be supported even with old kernel. So manually setting the same single
MAC on hsci, HiperSockets and the external interface is still required.
The hsci itself is not a bridgeport, so a static forwarding rule in the
bridge is also required. It seems cleaner to use the initial MAC of the
veth hsci as single static MAC, than the initial MAC of the HiperSockets
interface.
Even with an updated kernel a single static MAC interface, that is not
subject to ageing and re-learning, is beneficial when hsci is used as
a single MAC interface.
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The first implementation of HSCI (HiperSockets Converged Interface)
supports only a single static MAC address per HSCI and thus constructs
like MACVTAP or OpenVSwitch cannot be used on top of it.
Kernel commits
f7936b7b2663 s390/qeth: Update MACs of LEARNING_SYNC device
4e20e73e631a s390/qeth: Switchdev event handler
60bb1089467d s390/qeth: Register switchdev event handler
changed the behaviour of a LEARNING_SYNC HiperSockets (HS) device
such that any MAC address that is added or learned on a non-isolated
bridgeport of the HSCI bridge is set on the LEARNING_SYNC HS device and
its isolated siblings.
So no new trigger is required for a HS device with the bridge attribute
LEARNING_SYNC to support multiple MACs on a northbound HSCI interface.
However the first implementation of the hsci tool uses the bridge itself
as northbound HSCI interface. This is not treated as a real bridgeport.
So we add a veth bridgeport as northern link for HSCI.
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Instead of checking for ideal starting conditions, try to achieve
the desired outcome and accept conditions that do not prevent it.
This allows the user to get to a defined state, even if the
hsci interface was manipulated by other means than the hsci tool,
e.g. by ip commands or bridge commands
Minor cleanup:
hsci show:
- display PNET_ID, even if only one hsci port has one
(e.g. if External is a bond)
- only 1 header for mulitple hscis
hsci add:
- sanitize error messages
- allow nonsense HSCI of 2 HiperSockets
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Don't include dfi_mem_chunk.h in dfi.h because not every module including
dfi.h needs it.
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Separate the definition of a struct from the declaration of a global
variable of the type. To improve readability.
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Create a separate C header for STDOUT to separate independent things and
make it more readable.
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Set DFO format after the parsing of command-line arguments is done.
The command-line argument parsing should be independent of DFO.
This improves testability of the command-line argument parsing and
separates independent things from each other.
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Make the C module responsible for the parsing of command-line arguments
independent of other global variables. This improves its testability.
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Get rid of C headers which include everything. This is bad for testing and
maintainability. C files should include only what they need and no more.
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Create a separate C header for FUSE to separate independent things and
make it more readable.
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Create a separate C header for DFI VMCOREINFO to separate
independent things and make it more readable.
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Replace magic values with descriptive names to improve readability.
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
To prevent segmentation faults when the function dfi_mem_phys_read() is
given invalid parameters, check that the given memory range falls within
a known physical memory chunk, just like it is done for dfi_mem_virt_read().
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The new name describes the purpose of the function better and
emphasizes its difference with the function dfi_mem_phys_read().
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Always use the function dfi_mem_read_rc() which verifies that the given
address and size fall within a valid memory chunk. We cannot trust
user's input.
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The function dfi_mem_chunk_virt_add() is used only internally and should
not be exported to prevent misuse.
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The keyword extern is redundant for function declarations in C headers.
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Set stage3_parms.envblk_len to 0, if add_envblk is false.
This fixes segmentation fault when performing job with
not defined zIPL environment (e.g. installing SCSI dump)
Signed-off-by: Eduard Shishkin <edward6@linux.ibm.com>
Tested-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
PCI and crypto devices defined using the IBM Z Dynamic Partition Manager
(DPM) will start in an offline/unconfigured state that requires manual
intervention before the associated Linux function can be used. This
results for example in PCI networking interfaces being unavailable in a
distribution installer system.
Fix this by providing a udev rule and initial RAM-disk logic that
automatically enables PCI and crypto devices either during boot, or when
they are defined at run-time. This processing can be suppressed by
specifying the "rd.zdev=no-auto" parameter on the kernel command line.
Auto-configuration is limited to Linux running in DPM LPARs because
PCI-functions and crypto devices defined by DPM are always intended for
use by a single LPAR only.
For Linux running in classic-mode LPARs or virtual machines, leaving PCI
and crypto devices in an offline state may be useful to allow defining a
device as available to multiple systems, where only the system that
intends to make use of the device should enable it.
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add an internal tool intended to be used by udev rules to determine
zdev and hypervisor related system information in key=value format.
Supported keys are:
ZDEV_NEST_LEVEL=n
Virtualization nesting level of running system
ZDEV_HYPERVISOR_<n>=LPAR|z/VM|KVM/Linux
Type of hypervisor that provides virtualization at nesting level <n>
ZDEV_IS_DPM=0|1
Indicator if top-level LPAR is managed by Dynamic Partition Manager
ZDEV_NO_AUTO=0|1
Indicator if auto-configuration is requested
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
zgetdump is for analyzing VM coredumps and not user space coredumps therefore
return an error in case of a user space coredump.
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add new tool named 'sclpdbf'. This script displays the contents of
s390dbf sclp debug logs in human-readable format.
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Added a tool to operate with zIPL environment, currently
installed in the boot record. All modifying operations result
in atomic update of the installed environment block, bypassing
the file system driver.
Operations currently supported by zIPL environment editor:
. set/unset environment variables,
. print/reset environment
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Eduard Shishkin <edward6@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
from disk.c to a dedicated source file fs-map.c, so that the new
zipl-editenv tool will be also able to use it.
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Eduard Shishkin <edward6@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Before starting the kernel:
1. parse environment block (if any) and create a hash table
of all found pairs (NAME, VALUE);
2. scan the command line, which already contains extra-parameters
(if any), and for each found ${NAME} replace it with VALUE, as
found in the hash table by NAME.
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Eduard Shishkin <edward6@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
When installing a boot record for "ipl" and "menu" job, always add
an environment block as a boot component located in bootmap file
at offset alinged on file system block size boundary. When adding,
first try to import environment from a file at location specified
by newly introduced "--environment" zipl option, or by default at
"/etc/ziplenv". If nothing was imported, then add a blank environment
block. Optionally print the content of the environment block.
Store environment block size and address (as of boot component) in
stage3_parms.
Change interface of add_ipl_program(): add 2 additional arguments:
a pointer to bootmap file name and a predicate indicating if we
need to add environment block as a boot component.
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Eduard Shishkin <edward6@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Provide helper functions disk_write_block_buffer_align()
and add_component_buffer_align() to align offset of the record
on specified block size boundary and to save the offset, where
the record was made at.
This will be used by a later patch.
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Eduard Shishkin <edward6@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
. expand interface of disk_get_blocklist_from_file() to get
block pointers for a specific range of data within a file.
. provide a helper function add_component_file_range() to add a
specific range of data within a file as a boot component.
This will be used by a later patch.
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Eduard Shishkin <edward6@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This fixes the following Valgrind finding:
==28040== Syscall param rt_sigaction(act->sa_flags) points to uninitialised byte(s)
==28040== at 0x48C98B0: __libc_sigaction (sigaction.c:58)
==28040== by 0x10D507: sig_handler_init (zgetdump.c:58)
==28040== by 0x10D507: main (zgetdump.c:179)
==28040== Address 0x1ffefffc84 is on thread 1's stack
==28040== in frame #0, created by __libc_sigaction (sigaction.c:43)
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Fix the following incorrect help text line:
-T, --file-timeout (null) Stop reading file after SEC seconds
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Sanity check ELF notes descriptor size before reading it. This prevents
stack buffer overflows in case a dump contains invalid ELF notes.
Instead of reading a note's descriptor into a temporary buffer on stack,
read it directly into the buffer given to nt_read() but also provide
a maximum length of the given buffer to nt_read() in order to prevent
overflows.
This problem was found with valgrind and AFL fuzzing + ASAN.
AFL + ASAN findings:
[root@t83lp49 s390-tools]# ./zdump/zgetdump -iVVVVV ~/zgetdump-fuzzing/findings/crashes/id\:000008\,sig\:06\,src\:000007\,op\:arith8\,pos\:67\,val\:+3
TRACE: DFI initialization
DEBUG: DFI trying s390tape
DEBUG: DFI s390tape returned with rc -19
DEBUG: DFI trying devmem
DEBUG: DFI devmem returned with rc -19
DEBUG: DFI trying s390mv_ext
DEBUG: DFI s390mv_ext returned with rc -19
DEBUG: DFI trying s390mv
DEBUG: DFI s390mv returned with rc -19
DEBUG: DFI trying s390_ext
DEBUG: DFI S390 extended initialization
DEBUG: DFI s390_ext returned with rc -19
DEBUG: DFI trying s390
DEBUG: DFI S390 initialization
DEBUG: DFI s390 returned with rc -19
DEBUG: DFI trying lkcd
DEBUG: DFI lkcd returned with rc -19
DEBUG: DFI trying elf
DEBUG: DFI ELF initialization
DEBUG: DFI ELF e_phnum 11
DEBUG: DFI ELF p_type[0] 0x4
DEBUG: DFI ELF n_type 0x0
AddressSanitizer:DEADLYSIGNAL
=================================================================
==208548==ERROR: AddressSanitizer: stack-overflow on address 0x03ffef05d000 (pc 0x0000010051b0 bp 0x03fff107dc40 sp 0x03ffef05dac8 T0)
#0 0x10051b0 (/root/s390-tools/zdump/zgetdump+0x10051b0)
SUMMARY: AddressSanitizer: stack-overflow (/root/s390-tools/zdump/zgetdump+0x10051b0)
==208548==ABORTING
valgrind findings:
==56423== Source and destination overlap in memcpy(0x4a86d38, 0x4a875e0, 4096)
==56423== at 0x4839F86: memcpy (in /usr/lib/s390x-linux-gnu/valgrind/vgpreload_memcheck-s390x-linux.so)
==56423== by 0x114253: memcpy (string_fortified.h:34)
==56423== by 0x114253: nt_read (dfi_elf.c:95)
==56423== by 0x1145FF: nt_s390_prefix_read (dfi_elf.c:195)
==56423== by 0x1145FF: pt_notes_add (dfi_elf.c:259)
==56423== by 0x1145FF: dfi_elf_init (dfi_elf.c:326)
==56423== by 0x112A57: dfi_init (dfi.c:1212)
==56423== by 0x10D663: do_dump_info (zgetdump.c:127)
==56423== by 0x10D663: main (zgetdump.c:182)
==56423==
==56423== Invalid write of size 8
==56423== at 0x4839E28: memcpy (in /usr/lib/s390x-linux-gnu/valgrind/vgpreload_memcheck-s390x-linux.so)
==56423== by 0x114253: memcpy (string_fortified.h:34)
==56423== by 0x114253: nt_read (dfi_elf.c:95)
==56423== by 0x1145FF: nt_s390_prefix_read (dfi_elf.c:195)
==56423== by 0x1145FF: pt_notes_add (dfi_elf.c:259)
==56423== by 0x1145FF: dfi_elf_init (dfi_elf.c:326)
==56423== by 0x112A57: dfi_init (dfi.c:1212)
==56423== by 0x10D663: do_dump_info (zgetdump.c:127)
==56423== by 0x10D663: main (zgetdump.c:182)
==56423== Address 0x4a86ee0 is 0 bytes after a block of size 912 alloc'd
==56423== at 0x483675E: calloc (in /usr/lib/s390x-linux-gnu/valgrind/vgpreload_memcheck-s390x-linux.so)
==56423== by 0x10E71D: zg_alloc (zg.c:93)
==56423== by 0x114793: nt_prstatus_read (dfi_elf.c:123)
==56423== by 0x114793: pt_notes_add (dfi_elf.c:234)
==56423== by 0x114793: dfi_elf_init (dfi_elf.c:326)
==56423== by 0x112A57: dfi_init (dfi.c:1212)
==56423== by 0x10D663: do_dump_info (zgetdump.c:127)
==56423== by 0x10D663: main (zgetdump.c:182)
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Suggested-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reported-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Had a confusing decoded trace record:
Timestamp : ...
Area : SCSI
...
Tag : rsl_err
...
SCSI result : 0x00000002
SCSI opcode : 1a...
FCP rsp inf cod: 0x00
FCP rsp IU : 00000000 00000000 00000a02 000000ff
00000012 00000000
^^
and was wondering where that sense data would be or if the
corresponding PAY record "fcp_riu" was lost due to trace area wrapping.
So the fix here adds the following two lines to the same trace record:
FCP rsp IU len : 42
FCP rsp IU all : record not available anymore.
Similarly, the following LUN reset Task Management Function response
was missing the last two lines regarding the full FCP response IU
and its optional part with the FCP response info:
Timestamp : ...
Area : SCSI
...
Tag : lr_okay
...
FCP rsp inf cod: 0x00
FCP rsp IU : 00000000 00000000 00000100 00000000
00000000 00000008
^^
FCP rsp IU len : 32
FCP rsp IU all : record not available anymore.
As of today, depending on the kernel version we have
either fcp_sns or fcp_riu PAY trace records. See Linux kernel v4.14 commit
12c3e5754c80 ("scsi: zfcp: fix payload with full FCP_RSP IU in SCSI trace
records").
Always print non-zero payload length independent of payload type.
Actually this also fixes a regression for wrapped away fcp_sns.
If there is no fcp_sns it either wrapped away or it's a kernel with fcp_riu.
Only print fcp_riu if it contains more content than the preceding
unconditional fixed-size field "FCP rsp IU".
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Fedor Loshakov <loshakov@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
If the while loop in mem_chunks_add_ext() is never executed, then
the stack variable containing the dump segment header will never be
initialized.
clang's static code analyzer reports the following problem:
$ make CC="clang --analyze" -C zdump
dfi_s390.c:157:6: warning: Branch condition evaluates to a garbage value [core.uninitialized.Branch]
if (!dump_segm.stop_marker)
^~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Use util_log from libutil to output various log messages that can be helpful
during problem analysis.
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Replace the incorrect %d format specifier with %u one for unsigned integer
types.
This issue was found with AFL fuzzing.
$ ./zdump/zgetdump -i ~/input.bin
General dump info:
Dump format........: s390
Version............: -2147483647
System arch........: s390x (64 bit)
CPU count (online).: 32768
Dump memory range..: 1 MB
Memory map:
0000000000000000 - 00000000000f423f (1 MB)
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
We found situations, where the debug commands from dbginfo.sh
did overwrite some debug files (e.g. OSA s390dbf) - so we change
the collection order
Signed-off-by: Joern Siglen <siglen@de.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Before reading data in dfi_vmcoreinfo_init(), check the validity
of the memory range. Otherwise this can result in a segmentation fault when
zgetdump is given a very small dump, e.g. S390 DASD single-volume dump of
size 0x10 bytes.
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Before reading data in os_info_get(), check the validity of the memory
range. Otherwise this can result in a segmentation fault when zgetdump is
given a very small dump, e.g. S390 DASD single-volume dump of size 0x10
bytes.
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Before reading data at addresses 0x10418 and 0x10420 in kdump_init(),
validate the validity of the memory range. Otherwise this can result in
a segmentation fault when zgetdump is given a very small dump, e.g.
S390 DASD single-volume dump of size 0x1000 bytes.
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The dfi_vmcoreinfo_init() function might be called on a dump of a non-ELF
format because the DFI goes through all supported dump formats when first
trying to identify of what dump format the given input is. Therefore,
we must be very careful in interpreting read data and ensure that it
makes sense before accessing or using it.
This commit prevents a potential overflow of a stack buffer in
dfi_vmcoreinfo_init() if note.n_namesz is bigger than the stack buffer.
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
- adding new print function for simpler output customizing
- consolidate some output files
- sync structures and use of checks
- some formatting updates
Signed-off-by: Joern Siglen <siglen@de.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The function mem_chunks_add_ext() allocates but does not release memory
if it encounters unexpected errors during dump segment reading.
Allocate memory passed to dfi_mem_chunk_add() right before calling
the function. This way there is no need for a cleanup anymore.
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
- clenaup outdated kernel - we no longer have 2.x kenrel in support
- add timeout on command excution - ensure to not miss all data for a
single command to hang
Signed-off-by: Joern Siglen <siglen@de.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
When integrity support is enabled for a LUKS2 volume, then the LUKS2
volume key may include the integrity key concatenated to the secure key
(dependent on the integrity type).
Get the integrity key size from the LUKS2 header (if integrity support
is enabled) and calculate the size of the secure key when performing
operations with the secure key only.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
According to the ELF specification, the file size of a PT_LOAD
memory segment might be less than its memory size. In that case,
the remaining bytes must be filled with zeros. The ELF DFI implementation
didn't handle this case correctly. Such ELF core files might be produced
by the makedumpfile tool.
From elf.5 man page:
------------------------------------------------------
PT_LOAD
The array element specifies a loadable segment,
described by p_filesz and p_memsz. The bytes
from the file are mapped to the beginning of the
memory segment. If the segment's memory size
p_memsz is larger than the file size p_filesz,
the "extra" bytes are defined to hold the value
0 and to follow the segment's initialized area.
The file size may not be larger than the memory
size. Loadable segment entries in the program
header table appear in ascending order, sorted
on the p_vaddr member.
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Before attempting to read ELF program headers, the file must be positioned
at the offset of the first program header as specified in the ELF header.
Furthermore, read all ELF program headers with one call to zg_read(). This
has the advantage of not having to restore the file offset every time
after it is changed in pt_notes_add() and other functions which need to
read the same file as well.
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This is a false positive because IBM Z architecture supports unaligned
memory accesses.
dfo_s390.c: In function ‘df_s390_dump_init’:
dfo_s390.c:218:29: warning: taking address of packed member of ‘struct df_s390_hdr’ may result in an unaligned pointer value [-Waddress-of-packed-member]
218 | timeval2tod(&dh->tod, dfi_attr_time());
| ^~~~~~~~
dfo_s390.c:219:29: warning: taking address of packed member of ‘struct df_s390_em’ may result in an unaligned pointer value [-Waddress-of-packed-member]
219 | timeval2tod(&em->tod, dfi_attr_time());
| ^~~~~~~~
dfo_s390.c:222:29: warning: taking address of packed member of ‘struct df_s390_em’ may result in an unaligned pointer value [-Waddress-of-packed-member]
222 | timeval2tod(&em->tod, dfi_attr_time_end());
| ^~~~~~~~
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
When creating a bootmap, look for zipl components (stage3.bin and
zipl helpers) in a directory specified by S390TOOLS_LIBDIR shell
environment variable. If that variable is not set, then look for
them at the default location.
In verbose mode print the name of s390-tools library directory,
where the search was implemented.
Signed-off-by: Eduard Shishkin <edward6@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add generic functions
util_sysdir();
util_sysdir_path()
and their special cases supplied for users:
util_libdir();
util_libdir_path();
util_datadir();
util_datadir_path()
The function util_sysdir() determines the absolute name of a
s390-tools system directory. It could be data, or library directory.
The function util_sysdir_path() determines the absolute name of a
file installed in the s390-tools system directory.
The function util_libdir() determines the absolute name of a
s390-tools library directory. By default that name is defined
by the compile-time macro TOOLS_LIBDIR (/lib/s390-tools).
Users can specify an override by setting environment variable
S390TOOLS_LIBDIR.
The function util_libdir_path() determines the absolute name of a
file installed in the s390-tools library directory.
The function util_datadir() determines the absolute name of a
s390-tools system data directory. By default the name is defined
by the compile-time macro TOOLS_DATADIR (/usr/share/s390-tools/).
Users can specify an override by setting environment variable
S390TOOLS_DATADIR.
The function util_datadir_path() determines the absolute name of a
file installed in the s390-tools data directory.
The ability to override the setting for TOOLS_LIBDIR and
TOOLS_DATADIR is required for implementing tests on tools that are
not installed in their default system path locations.
Signed-off-by: Eduard Shishkin <edward6@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
lscss shows device number as 'None' if the corresponding device in the
subchannel is non-operational or not connected. Instead, show the
device-no derived from the new dev_busid attribute which provides the
value of device_id irrespective of the device availability.
i.e the current lscss shows
Device Subchan. DevType CU Type Use PIM PAM POM CHPIDs
----------------------------------------------------------------------
0.0.0000 0.0.0000 3390/0c 3990/e9 f0 a0 ff 32333435 00000000
none 0.0.00c7 f0 a0 5f 32333435 00000000
none 0.0.00c8 f0 a0 5f 32333435 00000000
here the subchannels 0.0.00c7 and 0.0.00c8 do not have an operational
device on them. Hence the device is shown as none.
With this patch,
Device Subchan. DevType CU Type Use PIM PAM POM CHPIDs
----------------------------------------------------------------------
0.0.0000 0.0.0000 3390/0c 3990/e9 f0 a0 ff 32333435 00000000
0.0.74c8 0.0.00c7 f0 a0 5f 32333435 00000000
0.0.74c9 0.0.00c8 f0 a0 5f 32333435 00000000
The device-no is shown as 0.0.74c8; Where the DevType field still
indicates that the device is not present.
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
lszcrypt now evaluates and displays the 'status' in the
'STATUS' column if the vfio provides this sysfs attribute.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The 'STATUS' field was within the code used as 'online'
record because it showed the online state. But now it
displays some more info like 'deconfig' and maybe even
more in the future. So now the code also uses a 'status'
record for this info.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Slight rework of the lszcrypt code with:
- a queue or card in deconfigured mode is displayed
as 'deconfig' regardless which driver is bound to
the device.
- a queue or card in 'deconfig' mode does not show
any counters any more but displays a '-' instead.
- a queue not bound or bound to something else as
the 'default' zcrypt dd does not show any counters
but displays a '-' instead.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The command
# vmur punch -r rhcos-live-kernel-s390x -u etpgxku -N kernel.img
Reader file with spoolid E YO created and transferred to ETPGXKU.
#
did not indicate an error when executed. However the file was not
transferred and this error message went unnoticed:
RPIMGR032E YOU ARE NOT AUTHORIZED TO CLOSE TO TATAC05.ETPGXKU
HCPCSL007E Invalid userid - ETPGXKU
Fix this by checking the CP return code and print the error message
returned by CP. This is the behavior now:
# vmur punch -r rhcos-live-kernel-s390x -u etpgxku -N kernel.img
vmur: CP command failed with rc=7
RPIMGR032E YOU ARE NOT AUTHORIZED TO CLOSE TO TATAC05.ETPGXKU
HCPCSL007E Invalid userid - ETPGXKU
#
Fixes: https://github.com/ibm-s390-linux/s390-tools/issues/119
Reported-by: Vance Morris <vmorris@us.ibm.com>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Tested-by: Vance Morris <vmorris@us.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Complements v2.9.0 commit 4036e80b26 ("lszfcp: add new output marker
for non-good FCP devices (hosts)").
Otherwise "linkdown" shows as "failed" because linkdown happens to be
the one special case that also sets the failed status flag of the
FCP device (host). Linkdown is kind of benign compared to other cases
where the FCP device is in failed status.
Examples:
$ lszfcp -He
0.0.194a host3 linkdown
$ lszfcp -HeV
/sys/devices/css0/0.0.0004/0.0.194a linkdown
/sys/class/fc_host/host3
/sys/class/scsi_host/host3
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Reviewed-by: Fedor Loshakov <loshakov@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The DFI memory chunk manager cannot handle PT_LOAD segments of size 0.
This can lead to a NULL pointer access in mem_chunk_find() in case
zgetdump is given an invalid VMCORE ELF file as input which contains
only zero-sized ELF PT_LOAD segments. Instead of crashing, show an error
message and terminate gracefully.
The TELA test dump_with_zero_sized_segments.sh can reproduce this bug.
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Zipl.conf is collected via /etc/*.conf in CONFIGFILES but BLS snippets
do not appear in /etc/zipl.conf.
Complements v2.5.0 commit d280e5b1fa ("zipl: Add BootLoaderSpec support")
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Some libraries depend on other libraries, so split the libraries
into two groups: base libraries that do not depend on any others, and
the remaining libraries, that may depend on the base libraries.
Ensure that the base libraries are built first, before starting to
build the remaining libraries. The tools are only built once the base
libraries and the remaining libraries have been built.
This fixes a possible build problem with libseckey when parallel build
is used. The libseckey library is used by libekmfweb and the zkey KMIP
plugin (zkey-kmip). With parallel build both are built in parallel,
and thus both trigger the build of libseckey. This can lead to the
situation that libseckey is built twice at the same time, which can lead
to build failures (corrupted archive, etc).
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
overlay.o was being recompiled during the install step because
it depended on the target check-dep-fuse which is phony and,
therefore, always outdated. The solution is to create an empty file
for the target check-dep-fuse after its successful completion. This
prevents make from rebuilding overlay.o during installation.
Closes: https://github.com/ibm-s390-linux/s390-tools/pull/118
Fixes: 5a7d2a58c8 ("hsavmcore: Fix fuse dependency checking")
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Suggested-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Use LONG_BIT provided by C standard in <limits.h>.
Fixes the following compile errors with buildroot:
lshwc.c: In function ‘parse_cpulist’:
lshwc.c:295:15: error: ‘__BITS_PER_LONG’ undeclared (first use in this function)
295 | no_a = i % __BITS_PER_LONG;
| ^~~~~~~~~~~~~~~
Fixes: 27a562da0a ("cpumf/lshwc: Program to extract complete counter sets")
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Use standard 32- and 64-bit C types.
Fixes the following compile errors with buildroot:
In file included from lshwc.c:41:
lshwc.h:61:2: error: unknown type name ‘__u64’
61 | __u64 version; /* Version of interface */
| ^~~~~
lshwc.h:62:2: error: unknown type name ‘__u64’
62 | __u64 data_bytes; /* # of bytes required */
| ^~~~~
lshwc.h:63:2: error: unknown type name ‘__u64’
63 | __u64 cpumask_len; /* Length of CPU mask in bytes */
| ^~~~~
lshwc.h:64:2: error: unknown type name ‘__u64’
64 | __u64 *cpumask; /* Pointer to CPU mask */
| ^~~~~
lshwc.h:65:2: error: unknown type name ‘__u64’
65 | __u64 counter_sets; /* Bit mask of counter set to get */
| ^~~~~
lshwc.h:69:2: error: unknown type name ‘__u32’
69 | __u32 set; /* Counter set number */
| ^~~~~
Fixes: 27a562da0a ("cpumf/lshwc: Program to extract complete counter sets")
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
KMIP values of type BYTE-STRING are represented as hex values when XML
or JSON encoding is used. Do not drop any leading zero bytes, if the
value has them.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
util_path_sysfs() allocates memory for the created path which must be
freed by the user.
Fixes: 8023a72b11 ("libdasd: Provide function to read ese sysfs attribute")
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
List (find) and import a key that exists in a KMIP server into the zkey
repository. Retrieve the key attributes of a key stored in a KMIP server,
and extract the zkey properties from it.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
When a key is removed from the zkey repository, it is usually not removed
from the KMIP server. Optionally, the state of a KMIP key can be changed
when it is removed by zkey.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Change the attributes of a key at the KMIP server when the properties
of a key are changed in zkey.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Allow to generate a new AES key at the KMIP server, and retrieved it.
Keys are always retrieved in wrapped format, wrapped by the public RSA
wrapping key used by the KMIP plugin. The KMIP plugin can then unwrap
the retrieved key with its secure private RSA key, and can then import
the retrieved AES key into the zkey repository as secure key. That way,
the retrieved AES key is never in clear, once it leaves the KMIP server.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
When the master keys of the configured APQNs are changed, the secure
identity key as well as the secure wrapping key must be re-enciphered.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Keys retrieved from a KMIP server are wrapped with an RSA key. The
RSA wrapping key is a secure key generated by the KMIP plugin. The
public RSA key is registered at the KMIP server, and the KMIP server
can then wrap the keys with it. The KMIP plugin can unwrap the retrieved
key with the private RSA key and import it as secure key into the zkey
repository.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Configure a connection to a KMIP server, establish trust between
server and client, query the KMIP server and verify if it supports
the required KMIP operations. Also, the profile to be used with this
KMIP server is tried to matched. If not specified in the profile,
the KMIP protocol version to be used is discovered.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
KMIP server profiles (not to be confused with profiles defined by
the KMIP standard) define how the KMIP plugin talks to the KMIP
server. Profiles can be used to configure certain KMIP usages for
certain KMIP servers.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Lines with '#' as first character are treated as comments, and are
skipped. Empty lines are also skipped.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
For the client certificate to authenticate with the KMIP server,
a certificate signing request (CSR) or self signed certificate can be
generated. The generated CSR or certificate is signed with the secure
identity key of the KMIP plugin.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Authentication with KMIP servers is based on TLS client authentication.
To establish trust between zkey and the KMIP server, a client certificate
must be registered with the KMIP server before a client can communicate
with it.
The signature key of the client's certificate is a secure key created by
zkey. It can either be an RSA or an ECC key, using either CCA or EP11
type crypto adapters configured with the KMIP plugin.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The KMIP plugin supports CCA and EP11 APQNs, but only it can only be
configured with one type. Once configured with one type of APQN, it accepts
only APQNs of the same type.
It supports key types matching to the APQn type it is configured with.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add support to integrate the external key management systems based
on the KMIP protocol (KMIP: OASIS Key Management Interoperability
Protocol) into zkey by providing a zkey KMS plugin for KMIP. The
plugin communicates with KMIP servers using libkmipclient over a
TLS or HTTPS connection.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Some functions are likely to be used by multiple plugins. Move them
into zkey common code (plugin-utils.c), this module is then linked
into the plugins.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
KMS plugins that support multiple key types need to know which
key type to produce with the kms_import_key() function. Extend
the plugin API to allow a plugin to provide a kms_import_key2()
function, that accepts the key type as additional parameter.
Existing plugins do not need to be changed, as the old function
kms_import_key() still exists, and is still used when the plugin
does not provide a kms_import_key2() function.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
libkmipclient is a shared library that provides an KMIP client to
communicate with an KMIP server. KMIP stands for Key Management
Interoperability Protocol, and is an extensible communication protocol
that defines message formats for the manipulation of cryptographic
keys on a key management server.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The libseckey is a secure key library to perform secure key operations
with OpenSSL. It provides a framework to create OpenSSL PKEYs with a
secure key attached. Such a PKEY contains the public key parts in clear,
but the private key as secure key blob. Only the private key operations
are actually performed with the secure key, public key operations are
performed in software by OpenSSL. It supports CCA and EP11 secure
keys for RSA and ECC crypto operations.
Because many PKEY method related functions are deprecated since OpenSSL
3.0, two versions of the OpenSSL secure key support are needed. One (using
a PKEY method override) for OpenSSL 1.1.1, and another one (using an own
OpenSSL provider) for OpenSSL 3.0 and later. The desired implementation is
selected automatically at compile time, using OpenSSL version defines. The
interface of both implementations is the same, so a user does not need to
care which one is used.
Reviewed-by: Juergen Christ <jchrist@linux.ibm.com>
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The new user-defined function allows to check for C headers in
make's conditional statements.
Example:
ifeq ($(call check_header_prereq,"systemd/sd-daemon.h"),yes)
$(warning "systemd support enabled")
else
$(warning "systemd support disabled")
endif
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Acked-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The callback function used for CURLOPT_SSL_CTX_FUNCTION requires
that OpenSSL is used as SSL backend.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add the genprotimg flags `--(enable|disable)-pckmo` flag to enable/disable the
support for PCKMO-encrypt-DEA/TDEA/AES/ECC-key functions.
Acked-by: Viktor Mihajlovski <mihajlov@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Allow the PCKMO-encrypt-DEA/TDEA/AES/ECC-key functions to be used in a protected
virtualization guest by default.
Acked-by: Viktor Mihajlovski <mihajlov@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The new name reflects that it's a plaintext control flag. While at it, use a
left shift operation to calculate the value.
Acked-by: Viktor Mihajlovski <mihajlov@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The HSA size, which limits the address space in kdump case, is not constant
and depends on the underlying architecture.
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The util_arch module is supposed to provide general information about
the underlying architecture of the machine in use.
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
... to avoid vulnerabilities that could occur if set-user-ID or
set-group-ID programs accidentally trusted the environment.
zkey is usually NOT a set-user-ID or set-group-ID program, but its
safer to use secure_getenv() anyway.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The only user of util_proc_mnt_get_entry() so far was util_path_sysfs().
With the simplified version there is no user left. Remove
util_proc_mnt_get_entry() and related code.
Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Using util_path_sysfs always leaves 5 bytes of memory unfreed as the
value for the sysfs mount point is stored in a static variable to avoid
multiple queries of /proc/mount.
$ valgrind ./util_path_example sysfs
==3629315== Memcheck, a memory error detector
==3629315== Copyright (C) 2002-2017, and GNU GPL'd, by Julian Seward et al.
==3629315== Using Valgrind-3.15.0 and LibVEX; rerun with -h for copyright info
==3629315== Command: ./util_path_example sysfs
==3629315==
Path for cpu: "/sys/devices/system/cpu"
Path for memory: "/sys/devices/system/memory"
==3629315==
==3629315== HEAP SUMMARY:
==3629315== in use at exit: 5 bytes in 1 blocks
==3629315== total heap usage: 22 allocs, 21 frees, 18,435 bytes allocated
==3629315==
==3629315== LEAK SUMMARY:
==3629315== definitely lost: 0 bytes in 0 blocks
==3629315== indirectly lost: 0 bytes in 0 blocks
==3629315== possibly lost: 0 bytes in 0 blocks
==3629315== still reachable: 5 bytes in 1 blocks
==3629315== suppressed: 0 bytes in 0 blocks
==3629315== Rerun with --leak-check=full to see details of leaked memory
==3629315==
==3629315== For lists of detected and suppressed errors, rerun with: -s
==3629315== ERROR SUMMARY: 0 errors from 0 contexts (suppressed: 0 from 0)
As per the Kernel rules for accessing sysfs information [1], searching
for the sysfs mount point is a waste of time and systems that don't have
sysfs mounted at /sys are considered broken.
With those things in mind, util_path_sysfs() and especially
sys_mount_point() can be simplified. sys_mount_point() will always
return '/sys' unless the environment variable SYSFS_ROOT is set.
With SYSFS_ROOT still being present, special container setups or test
case scenarios are still possible but might need to be modified if they
previously relied on util_path_sysfs() automatically finding the correct
sysfs mount point.
To make things more secure against malicious strings in SYSFS_ROOT,
secure_getenv() is being used and the ordering of creating the formatted
path string in util_path_sysfs() is changed slightly.
Furthermore, the static variable is removed as no complicated query of
the /proc fs is required anymore. Memory for the sysfs mount point value
is properly freed now at the end of util_path_sysfs().
[1] https://www.kernel.org/doc/html/latest/admin-guide/sysfs-rules.html
Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
A compile with sparse (make C=1) shows a couple of warnings:
like:
chzcrypt.c:36:3: warning: symbol 'l' was not declared.
Should it be static?
lszcrypt.c: In function 'show_device':
lszcrypt.c:556:9: warning: 'card' may be used uninitialized
[-Wmaybe-uninitialized]
Fix those warnings.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
A compile with sparse (make C=1) shows the following warnings:
util_rec.c:211:6: warning: symbol 'rec_print_wide' was not declared.
Should it be static?
util_rec.c:383:6: warning: symbol 'rec_print_csv_hdr' was not declared.
Should it be static?
util_rec.c:404:6: warning: symbol 'rec_print_csv' was not declared.
Should it be static?
These functions are only used internally from function util_rec_print_hdr(),
declare them as static.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
A compile with sparse (make C=1) shows the following warnings:
util_opt.c:42:19: warning: symbol 'util_opt_l' was not declared.
Should it be static?
util_prg.c:28:19: warning: symbol 'util_prg_l' was not declared.
Should it be static?
util_opt_l and util_prg_l are not used anywhere, and also not declared in
any header file. Looks like they are superfluous, remove them.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
hsavmcore is designed to make the dump process with kdump more efficient.
With hsavmcore, the HSA memory that contains a part of the production
kernel's memory can be released early in the process. Depending on the size
of the production kernel's memory, writing the dump to persistent storage
can be time consuming and prevent the HSA memory from being reused
by other LPARs.
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Philipp Rudo <prudo@linux.ibm.com>
Acked-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The CCA Key Translate2 verb needs a pre-built AES CIPHER key token skeleton
with XPRTCPAC set in the output buffer, to produce an AES CIPHER key
that can be exported to CAPCF.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Build:
$ make -C libutil/util_log_example
* Every time a -V option is passed, the verbosity level increases and extra
messages are enabled.
Test:
$ ./libutil/util_log_example
# No output
$ ./libutil/util_log_example -V
ERROR: This is an ERROR message
$ ./libutil/util_log_example -VV
ERROR: This is an ERROR message
WARN: This is a WARN message
$ ./libutil/util_log_example -VVV
ERROR: This is an ERROR message
WARN: This is a WARN message
INFO: This is an INFO message
$ ./libutil/util_log_example -VVVV
ERROR: This is an ERROR message
WARN: This is a WARN message
INFO: This is an INFO message
DEBUG: This is a DEBUG message
$ ./libutil/util_log_example -VVVVV
ERROR: This is an ERROR message
WARN: This is a WARN message
INFO: This is an INFO message
DEBUG: This is a DEBUG message
TRACE: This is a TRACE message
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Reviewed-by: Philipp Rudo <prudo@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The goal of util_log is to provide a facility for a multi-level message
logging on stderr. This allows to selectively enable/disable log messages
via a log level which can be adjusted at runtime.
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Reviewed-by: Philipp Rudo <prudo@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The tmp buffer is one byte too short missing space for the final \0 byte
leading to out of bound access.
Fix by increasing the buffer by one.
Reported-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add transparent codepage conversion feature to zdsfs.
Add options to specify that codepage conversion should be done using
default codepages from 'CP1047' to 'UTF-8' or using user defined codepage
tables.
Also add a new config file allowing the user to specify codepage conversion
options on a per dataset basis.
When a dataset is opened and codepage conversion settings match this
dataset an iconv handle is created and the conversion itself is performed
by the lzds_dshandle_read() function.
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add codepage conversion capabilities to libzds.
Whenever a dataset is read and an appropriate iconv handle is set for the
dataset the conversion is automatically performed.
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Replace function linux_error() by err/warn family.
Delete function linux_error() which is not used anymore.
Also fix some checkpatch warnings regarding comparison to zero.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Simplify function read_sfb(). Convert it to type void
and return only when no errors occurred.
On error print error message and exit instead of return.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Program reads complete counter sets from any CPU by opening
device /dev/hwctr which is available with linux version 5.12.
The counter sets and CPUs can be specified on the command line.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Use function util_opt_print_parse_error() instead of fprintf to stderr.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Simplify comparison against 0 or NULL and fix a checkpatch.pl
warning.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Using "chzdev -e" to configurate a device persistently, the
corresponding udev rule is also created, which will trigger a uevent
that sets the device online as soon as the group device is created.
If 'znetconf -r/R' is first used to remove such a configured device
(which won't remove the corresponding udev rule) and then
'znetconf -a/A' afterwards on the same device, either the error
"Failed to make <device> online" or "Failed to configure layer2=1"
will occur.
For the first error, the udev queue might not have been fully processed
and hence the check whether a device is online may fail due to that
race. Call 'udevadm settle' to ensure a fully processed queue before
checking whether a device is online.
The second error occurs, because configure_ccwgroupdev_option() does
not check whether the device is online. Add the check and set the
device offline if necessary. Also, log any details for debugging
purposes.
Signed-off-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add virsh commands for KVM debug data collection and rework the domain
data collection and step numbering. Update the man page accordingly.
[hoeppner@linux.ibm.com: Reword commit message]
Signed-off-by: Joern Siglen <siglen@de.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Performance evaluation showed that using the mq-deadline scheduler for DASD
devices leads to a significantly higher CPU consumption compared to using
none scheduler while having the same amount of throughput.
Setting none scheduler as default in the dasd udev rule.
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
When the compiler flags are overridden, the build of zkey may fail with:
kms.c:44:2: error: #error KMS_PLUGIN_LOCATION must be defined
44 | #error KMS_PLUGIN_LOCATION must be defined
| ^~~~~
The Makefile uses CFLAGS variable for defining the KMS_PLUGIN_LOCATION,
but it should rather use ALL_CFLAGS.
Also use ALL_CPPFLAGS for defining HAVE_LUKS2_SUPPORT.
Fixes: https://github.com/ibm-s390-linux/s390-tools/issues/108
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
For maximum performance the MTU of an HSCI interface was set to the value
of the MTU of its HiperSockets interface. However, the MTU of a
HiperSockets interface can be very large, and when the data packets are
not sent over the HiperSocket but over the corresponding ethernet
interface (which usually has a smaller MTU size) then it can happen that
the large packets are silently dropped. One example would be communication
from an HSCI in one CEC to another HSCI in another CEC via Ethernet.
To solve the problem, the MTU setting in this tool is removed, and the
default MTU value is used. Thus, the minimum value of the MTUs of the both
converged interfaces is used as the MTU of the HSCI interface.
Fixes: 0566a492ae ("s390-tools: add hsci tool")
Signed-off-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Since crash 7.2.9 commit
f1f43bf355
in support of kernel v5.9 commit 0990d836cecb
("s390/debug: debug feature version 3"),
the symbolic caller function name is left aligned instead of right
aligned, so now we alternatively have to remove whitespace between
function name and offset.
Otherwise, zfcpdbf output contains wrong warnings about ambiguous payload
records with wrong values for reqid and area, as well as incorrectly
decoded trace records with wrong content values and potential error
messages on not defined record id, and finally a potential list of
occurrences of unknown tags which should empty:
Loading trace records ...(this might take a while)
Warning: Ambiguous PAYload records. reqid:>>>wrong<<< area:V^D^@fcp_
Warning: Ambiguous PAYload records. reqid:>>>wrong<<< area:W^D^@fsf_
Warning: Ambiguous PAYload records. reqid:>>>wrong<<< area:i^B^@san_
...
Timestamp : ...
Area : SAN
Subarea : 00
Level : 1
Exception : -
CPU ID : 0001
Caller : <zfcp_dbf_san_in_els
Record ID : 0
Tag : 6^B^Cfcie
Request ID : >>>wrong<<<
Destination ID : >>>wrong<<<
SAN record id=0 not defined.
Timestamp : ...
Area : SAN
Subarea : 00
Level : 1
Exception : -
CPU ID : 0002
Caller : <zfcp_dbf_san_in_els
Record ID : 0
Tag : 6^B^Cfcie
Request ID : >>>wrong<<<
Destination ID : >>>wrong<<<
SAN record id=0 not defined.
...
occurrences of unknown tags:
...
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
For the stage2 of zipl's boot loaders only 3 heap pages are available
[0x6000, 0x6000 + 0x3000]. Therefore, stage2 code needs to be very careful
when and for how long it allocates a heap page.
The heap OOM problem in stage2 was hidden until the commit 252be376
("zipl/boot: fix potential heap overflow in stage2"). Before this commit,
stage2 assumed that heap is 4 pages large which is apparently very wrong
but get_zeroed_page() still allowed allocating an extra 4th page by
overriding the memory segment following the heap area of stage2 (stage3
parameter area).
Try to avoid allocating a heap page and keeping it allocated over a long
period of time in the DASD dumpers. Free a heap page as soon as possible
if not required anymore.
And be extra careful with printf() because it always tries to allocate
a free heap page.
Fixes: 252be376 ("zipl/boot: fix potential heap overflow in stage2")
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Philipp Rudo <prudo@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
RFC 7517 requires that the x and y coordinates of a ECC JSON Web Key
(JWK) are specified in its full size of a coordinate for the curve used.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Deleting an HSCI interface, the connected HiperSockets interface's name
and the connected Ethernet interface's name are extracted from "ip link
show". Currently the extracted names are directly used in "bridge -d link
show dev ifname" for further checking. If "iflink" and "ifindex" of an
interface are not matched, ip commands will print @ifXX appended to the
real interface's name. Thus, it will be failed if the interface's name
with the ending @ifXX is used in "bridge -d link show dev ifname" for
further checking.
To solve the problem, the ending @ifXX must be removed before the
interface name is used further.
Signed-off-by: Wenjia Zhang <wenjia@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
In the current code, after the function check_pnetids() and the function
verify_precon() are called, $? from each function is used twice
successively. It is used for the first time in the condition of the IF
statement, while for the second time as return code of the current
function. In bash, $? can be used to get the return code, but only for
the first time directly after the previous function is called.
Afterwards, $? will be reset to "0". Thus, the right return code can not
be get, if $? is used second time.
To solve the problem, using $? for the second time should be avoided.
Signed-off-by: Wenjia Zhang <wenjia@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Install libasan first, e.g. on Fedora 32:
dnf install -y libasan libasan-static.
To compile with address sanitizer, pass ASAN=1 to make.
AdressSanitizer helps to catch various memory bugs for which C/C++ is
infamous.
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Philipp Rudo <prudo@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This fixes the following compiler errors when ASAN is enabled:
CC cmsfs-fuse/cmsfs-fuse.o
cmsfs-fuse.c: Assembler messages:
cmsfs-fuse.c:310: Error: operand out of range (0xffffffffffffff00 is not between 0x0000000000000000 and 0x0000000000000fff)
cmsfs-fuse.c:310: Error: operand out of range (0xffffffffffffff00 is not between 0x0000000000000000 and 0x0000000000000fff)
cmsfs-fuse.c:310: Error: operand out of range (0xffffffffffffff00 is not between 0x0000000000000000 and 0x0000000000000fff)
cmsfs-fuse.c:310: Error: operand out of range (0xffffffffffffff00 is not between 0x0000000000000000 and 0x0000000000000fff)
cmsfs-fuse.c:310: Error: operand out of range (0xffffffffffffff00 is not between 0x0000000000000000 and 0x0000000000000fff)
cmsfs-fuse.c:310: Error: operand out of range (0xffffffffffffff00 is not between 0x0000000000000000 and 0x0000000000000fff)
cmsfs-fuse.c:302: Error: operand out of range (0xfffffffffffffda0 is not between 0x0000000000000000 and 0x0000000000000fff)
cmsfs-fuse.c:302: Error: operand out of range (0xfffffffffffffda0 is not between 0x0000000000000000 and 0x0000000000000fff)
cmsfs-fuse.c:302: Error: operand out of range (0xfffffffffffffda0 is not between 0x0000000000000000 and 0x0000000000000fff)
cmsfs-fuse.c:302: Error: operand out of range (0xfffffffffffffda0 is not between 0x0000000000000000 and 0x0000000000000fff)
cmsfs-fuse.c:302: Error: operand out of range (0xfffffffffffffda0 is not between 0x0000000000000000 and 0x0000000000000fff)
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Philipp Rudo <prudo@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
When keys are generated concurrently in EKMF Web from multiple clients,
and the key labels use a sequence number tag, then the assignment logic
of the sequence number may cause a duplicate sequence number to be used,
because another key might have already been generated with the same
sequence number, since the next-to-use sequence number has been retrieved
from EKMF Web. This results in a HTTP response code of 409 and a -EEXIST
return code from ekmf_generate_key().
Instead of getting the last used sequence number from EKMFWeb, tell
EKMFWeb to automatically use the next available sequence number when
generating a key. When the sequence number label tag value is 'next'
then EKMFWeb will automatically assign the next available sequence number
to the label tag and increment the sequence number in an atomic way.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
If a memory chunk is added to mem_phys as well as mem_virt
in dfi_mem_chunk_add_vol() then an illegal memory access might occur
when accessing mem_chunk->data e.g. in dfi_elf_mem_chunk_read_fn()
because the data block pointed to by the data field is now being referenced
by two memory chunks, one in mem_phys and one in mem_virt. If it happens
that the memory chunk from mem_virt is freed in mem_unmap() then
the memory chunk in mem_phys still points to the common data block
which has been already freed. This leads to all sort of bad behavior
in dfi_elf_mem_chunk_read_fn() and other places where mem_chunk->data
might be accessed.
Fixes the following bug:
zgetdump: Unexpected end of file for "dump.all.elf"
And this was found by AddressSanitizer:
=================================================================
==81170==ERROR: AddressSanitizer: heap-use-after-free on address 0x602000000570 at pc 0x00000101ac10 bp 0x03ffd897e250 sp 0x03ffd897e248
READ of size 8 at 0x602000000570 thread T0
#0 0x101ac0f in dfi_elf_mem_chunk_read_fn s390-tools/zdump/dfi_elf.c:27
#1 0x100d8a5 in mem_read s390-tools/zdump/dfi.c:339
#2 0x100d8a5 in dfi_mem_phys_read s390-tools/zdump/dfi.c:616
#3 0x100d8a5 in mem_chunk_map_read_fn s390-tools/zdump/dfi.c:353
#4 0x100fd29 in mem_read s390-tools/zdump/dfi.c:339
#5 0x100fd29 in dfi_mem_read s390-tools/zdump/dfi.c:608
#6 0x1018e89 in os_info_get s390-tools/zdump/dfi_vmcoreinfo.c:65
#7 0x1018e89 in dfi_vmcoreinfo_init s390-tools/zdump/dfi_vmcoreinfo.c:86
#8 0x10175b3 in dfi_init s390-tools/zdump/dfi.c:1215
#9 0x1006e71 in do_stdout s390-tools/zdump/zgetdump.c:161
#10 0x1006e71 in main s390-tools/zdump/zgetdump.c:180
#11 0x3ffb07abb89 in __libc_start_main (/lib64/libc.so.6+0x2bb89)
#12 0x1007e8d (s390-tools/zdump/zgetdump+0x1007e8d)
0x602000000570 is located 0 bytes inside of 8-byte region [0x602000000570,0x602000000578)
freed by thread T0 here:
#0 0x3ffb0bc961b in free (/lib64/libasan.so.6+0xc961b)
#1 0x100d2d9 in mem_unmap s390-tools/zdump/dfi.c:1050
previously allocated by thread T0 here:
#0 0x3ffb0bc9aa9 in calloc (/lib64/libasan.so.6+0xc9aa9)
#1 0x100a271 in zg_alloc s390-tools/zdump/zg.c:93
SUMMARY: AddressSanitizer: heap-use-after-free s390-tools/zdump/dfi_elf.c:27 in dfi_elf_mem_chunk_read_fn
Shadow bytes around the buggy address:
0x100c0400000050: fa fa 00 fa fa fa 00 fa fa fa 00 fa fa fa 00 fa
0x100c0400000060: fa fa 00 fa fa fa 00 fa fa fa 00 fa fa fa 00 fa
0x100c0400000070: fa fa 00 fa fa fa 00 fa fa fa 00 fa fa fa 00 fa
0x100c0400000080: fa fa 00 fa fa fa 00 fa fa fa 00 fa fa fa 00 fa
0x100c0400000090: fa fa 00 fa fa fa 00 fa fa fa 00 fa fa fa 00 fa
=>0x100c04000000a0: fa fa 00 fa fa fa 00 fa fa fa 00 fa fa fa[fd]fa
0x100c04000000b0: fa fa fd fa fa fa fd fa fa fa fd fa fa fa fd fa
0x100c04000000c0: fa fa fd fa fa fa fd fa fa fa fd fa fa fa 04 fa
0x100c04000000d0: fa fa 00 fa fa fa 00 fa fa fa 00 fa fa fa 00 fa
0x100c04000000e0: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x100c04000000f0: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
Shadow byte legend (one shadow byte represents 8 application bytes):
Addressable: 00
Partially addressable: 01 02 03 04 05 06 07
Heap left redzone: fa
Freed heap region: fd
Stack left redzone: f1
Stack mid redzone: f2
Stack right redzone: f3
Stack after return: f5
Stack use after scope: f8
Global redzone: f9
Global init order: f6
Poisoned by user: f7
Container overflow: fc
Array cookie: ac
Intra object redzone: bb
ASan internal: fe
Left alloca redzone: ca
Right alloca redzone: cb
Shadow gap: cc
==81170==ABORTING
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Philipp Rudo <prudo@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Verify the given ELF header before adding any memory chunks otherwise
a memory chunk might be added even if the given ELF header is invalid.
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Philipp Rudo <prudo@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Some Linux distributions always include a copy of all persistent device
configuration data when updating the initial RAM-disk. This makes
chzdev's persistent device configuration changes ineffective because
device configuration directives applied in the RAM-disk take precedence
over those stored in the root filesystem.
This patch introduces a new build-time switch which allows distributions
to specify that whenever there is a persistent device configuration
change, the RAM-disk is updated automatically.
This feature can be enabled by adding 'ZDEV_ALWAYS_UPDATE_INITRD=1' as
a zdev build option. Where, by default ZDEV_ALWAYS_UPDATE_INITRD is 0.
Co-developed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
After a master key change, it can happen that the AF_ALG setkey
operation returns EINVAL, although the key is valid. This is a
temporary situation and the operation will succeed, once the firmware
has completed some internal processing related with the master key
change. Delay 1 second and retry up to 10 times.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
If fdasd is used right after dasdfmt, it may fail with the following
error due to udev still processing events for the device:
```
fdasd error: IOCTL error: Error while rereading partition table.
```
Call dasd_reread_partition_table() with an increased retry value to
circumvent this issue.
Closes: https://github.com/ibm-s390-tools/s390-tools/pull/103
Signed-off-by: Nikita Dubrovskii <nikita@linux.ibm.com>
[hoeppner@linux.ibm.com: Reword commit message]
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Extend zkey to allow to store a (dummy) LUKS2 passphrase together with a
secure key, for use with LUKS2 volumes. That way, when the repository is
backed up, or archived, also the passphrases of the associated LUKS2
volumes are backed up, or archived, and thus can not be forgotten.
This passphrase is then used in generated commands to format and open
the LUKS2 volumes.
Because of the use of secure keys to encrypt the volumes, the LUKS2
passphrase is of no or less relevance for security. It is therefore OK to
store the passphrase in clear text in the key repository, and also use
them in /etc/crypttab. Therefore, the passphrase could actually be a
trivial passphrase, or a dummy passphrase.
Note: Such a dummy passphrase is NOT considered a secret that needs to
be protected. If for a certain usage the passphrase is of relevance for
security, then the zkey dummy passphrase option must not be used to store
the passphrase.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Juergen Christ <jchrist@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
gcc's -Werror switch also enables -Werror=inline which leads to a compilation
failure due to inline warnings caused by GLIB macros. To fix it, disable
the conversion of inline warnings into errors.
In file included from buildroot/qemu-s390x/host/bin/../s390x-buildroot-linux-gnu/sysroot/usr/lib/glib-2.0/include/glibconfig.h:9,
from buildroot/qemu-s390x/host/bin/../s390x-buildroot-linux-gnu/sysroot/usr/include/glib-2.0/glib/gtypes.h:32,
from buildroot/qemu-s390x/host/bin/../s390x-buildroot-linux-gnu/sysroot/usr/include/glib-2.0/glib/galloca.h:32,
from buildroot/qemu-s390x/host/bin/../s390x-buildroot-linux-gnu/sysroot/usr/include/glib-2.0/glib.h:30,
from pv/pv_hdr.c:10:
buildroot/qemu-s390x/build/s390-tools-2.15.1/genprotimg/src/utils/buffer.h: In function ‘pv_hdr_new’:
buildroot/qemu-s390x/host/bin/../s390x-buildroot-linux-gnu/sysroot/usr/include/glib-2.0/glib/gmacros.h:1028:49: error: inlining failed in call to ‘glib_autoptr_clear_Buffer’: call is unlikely and code size would grow [-Werror=inline]
1028 | #define _GLIB_AUTOPTR_CLEAR_FUNC_NAME(TypeName) glib_autoptr_clear_##TypeName
| ^~~~~~~~~~~~~~~~~~~
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Current heap size in stage2 is three pages long [0x6000-0x9000] but
get_zeroed_page() assumes it is one page more which might lead to
a heap overflow which will corrupt data located at 0x9000 (stage3
parameters). Calculate the heap size of a stage at run-time
by using the symbols provided by linker.
Furthermore, validate the given address in free_page() to stop illegal
memory accesses.
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Philipp Rudo <prudo@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Prevent access to freed memory still pointed to by entry.
entry still points into load_page that has been released with free_page.
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
When some of the key properties are skipped due to null_values_only
being true or false, then the resulting EKMF tag list might be built
incorrectly.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
To remove a KMS property function kms_set_key_properties() can be
called with the property value set to NULL. Do not assert for non-NULL
property values.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
`-Winline` can cause problems with the cleanup functions defined by
glib. Therefore let's remove the cflag for now.
DEBUG: /usr/include/glib-2.0/glib/gmacros.h:1031:43: error: inlining failed in call to 'glib_autoptr_cleanup_STACK_OF_X509_CRL.isra.0': call is unlikely and \
code size would grow [-Werror=inline]
DEBUG: 1031 | #define _GLIB_AUTOPTR_FUNC_NAME(TypeName) glib_autoptr_cleanup_##TypeName
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This should be no problem (if OpenSSL works correctly), because
`crls_download_cb` is only called out of the verification context of
OpenSSL. It's used to look up a CRL and therefore
X509_STORE_CTX_get_current_cert should always return a certificate
since X509_STORE_CTX_get_current_cert returns NULL only if an error
has occurred during the verification (see
https://www.openssl.org/docs/man1.1.0/man3/X509_STORE_CTX_get_current_cert.html).
Fixes: 074de1e14e ("genprotimg: add host-key document verification support")
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add host-key document verification support to genprotimg. This ensures
that a host-key document is genuine and provided by IBM. For this the
user must provide the IBM Z signing key, the intermediate CA
certificate (signed by the root CA used) so a chain of trust starting
from the host-key document and ending in the root CA can be
established.
By default, genprotimg tries to download all revocation lists needed
by looking up in the corresponding certificate on how CRL information
can be obtained (see https://tools.ietf.org/html/rfc5280#section-4.2.1.13
for details).
Acked-by: Patrick Steuer <patrick.steuer@de.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
A argument is required for the optional options 'ramdisk' and
'parmfile'.
Fixes: 65b9fc442c ("genprotimg: introduce new tool for the creation of PV images")
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add the -v short option for version information to the mk-s390image and
mk-pxelinux-ramfs. Adjust the Makefile accordingly to set the correct
s390-tools version during installation.
Acked-by: Viktor Mihajlovski <mihajlov@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Use '--' for rm calls to distinguish between options and files. This
fixes, for example, the following error:
make[1]: Entering directory '/root/git/s390-tools/genprotimg/src'
rm -f *.gcda *.gcno *.gcov
rm: invalid option -- '.'
Try 'rm ./-.gcno' to remove the file '-.gcno'.
Try 'rm --help' for more information.
make[1]: *** [../../common.mak:369: clean_gcov] Error 1
Acked-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
chcpumf must be executed as root. A non-root user sees this error
message:
[tester@t35lp46 ~]$ chcpumf -m 1000
Error: /sys/module/kernel/parameters/cpum_sfb_size: Permission denied
[tester@t35lp46 ~]$
Enhance the error message and be clear about the root cause:
[tester@t35lp46 ~]$ chcpumf-new -m 1000
Error: Must run as root
[tester@t35lp46 ~]$
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Provide the status of the FC Endpoint Security information via the long
output of lsdasd for online Base and Alias devices.
New Output:
$ lsdasd -l c600
0.0.c600/dasdd/9412
status: n/f
type: ECKD
blksz: 512
size:
blocks:
extent_size: 1113
logical_capacity: 1113
space_allocated: 1113
use_diag: 0
readonly: 0
eer_enabled: 0
erplog: 0
hpf: 1
uid: IBM.750000000KMV11.c600.00
fc_security: Encryption
paths_installed: 38 39 3a 3b
paths_in_use: 38 39 3a 3b
paths_non_preferred:
paths_invalid_cabling:
paths_cuir_quiesced:
paths_invalid_hpf_characteristics:
paths_error_threshold_exceeded:
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Provide information for the DASD device attribute 'fc_security'.
The help output for this attribute can be queried like this:
chzdev dasd --help-attribute
The lszdev tool can be used to display the current state of the FC
Endpoint Security information:
lszdev dasd -a -c TYPE,ID,ATTR:fc_security,ATTRPATH:fc_security
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
When many domains per card are available, then the results of the SCDMD
CHSC call may not fit into the output area, and a partial result is
returned. The further results must be retrieved with another CHSC call.
Fix the code to pass the correct next-domain to the subsequent CHSC call
of a partial response. Otherwise the same set of domains 1 to n are
retrieved again, resulting in an infinite loop, because this will always
produce a partial result.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Noticed on RHEL CoreOS that the CPI service failed to start with:
"Cannot access lock file: /var/lock/cpictl.lock"
This was a timing issue where /var was not created yet and the symlink
to /run/lock was not present. Add sysinit.target to fix this.
This fix has been tested with RHEL CoreOS.
Closes: https://github.com/ibm-s390-tools/s390-tools/pull/82
Signed-off-by: Prashanth Sundararaman <psundara@redhat.com>
Suggested-by: Colin Walters <walters@verbum.org>
Reviewed-by: Dan Horák <dan@danny.cz>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Modern systems have systemd manage system mount points like sysfs which
specify 'sysfs' as a keyword for the device as there is no device
associated with this special filesystem. However, any arbitrary string
could be specified here and the determination of the sysfs mount point
would fail in such a case.
To make sure that the mount point of the sysfs is still found when
mounted with a device keyword specified other than 'sysfs', check for
the filesystem type instead, which is more specific.
Fixes: https://github.com/ibm-s390-tools/s390-tools/issues/91
Suggested-by: Mark Post <mpost@suse.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add a proper definition to the dasdfmt header file of the error()
function that lets the compiler check the format string against the
provided parameters.
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
hsci is used to control and show HSCI (HiperSockets Converged Interfaces)
settings. A HiperSockets interface and an external network interface are
converged to an HSCI interface.
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
==1005844== HEAP SUMMARY:
==1005844== in use at exit: 18,907 bytes in 14 blocks
==1005844== total heap usage: 82 allocs, 68 frees, 32,529 bytes allocated
==1005844==
==1005844== 136 (104 direct, 32 indirect) bytes in 1 blocks are definitely lost in loss record 12 of 14
==1005844== at 0x483885A: calloc (vg_replace_malloc.c:760)
==1005844== by 0x48C950D: g_malloc0 (gmem.c:132)
==1005844== by 0x100EC41: pv_args_new (pv_args.c:364)
==1005844== by 0x100587F: main (genprotimg.c:122)
==1005844==
==1005844== LEAK SUMMARY:
==1005844== definitely lost: 104 bytes in 1 blocks
==1005844== indirectly lost: 32 bytes in 1 blocks
==1005844== possibly lost: 0 bytes in 0 blocks
==1005844== still reachable: 18,771 bytes in 12 blocks
==1005844== suppressed: 0 bytes in 0 blocks
==1005844== Reachable blocks (those to which a pointer was found) are not shown.
==1005844== To see them, rerun with: --leak-check=full --show-leak-kinds=all
==1005844==
==1005844== For lists of detected and suppressed errors, rerun with: -s
==1005844== ERROR SUMMARY: 1 errors from 1 contexts (suppressed: 0 from 0)
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Abort compilation as soon as one of the recursive targets is failing.
Fixes: 65b9fc442c ("genprotimg: introduce new tool for the creation of PV images")
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Adding one to the pointer per block value results in a wrong
calculation of pointer block levels. When writing a file that
would result in about 454MB size, the code would calculate that
it needs a two level pointer directory but correct would be a three
level pointer directory. This causes an invalid filesystem state:
besides missing all the records of one top level pointer directory
entry, it would also record a higher record number in the FST than
what is present in the pointer blocks.
Note that this bug only hits when the file is about 454MB and the write
is stopped (means the file is closed) - if file writing continues the
problem doesn't happen because at some point in time cmsfs-fuse would
switch to three levels of pointer blocks anyways as the file grows.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
When specifying an incorrect program option, dasdfmt segfaults as the
format string for the corresponding error message has no parameter.
Add the missing parameter to fix this.
Fixes: 732b3dddab ("dasdfmt: Replace ERRMSG_EXIT macro with an error handling function")
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
util_sys_get_dev_addr() returns the device address for a given blockdevice.
This does not work for partitions but some tools rely on the ability to get
the device address for partitions.
Add code that first determines the base device for a partition.
Fixes: 6014d07cb1 ("dasdview/libdasd/zipl: Use util_sys_get_dev_addr() instead of u2s_getbusid()")
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Reviewed-by: Philipp Rudo <prudo@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Some operations are only possible on base devices not on partitions.
Add functions to determine if a given device is a partition or a base
device and to get the base device to a given partition.
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Reviewed-by: Philipp Rudo <prudo@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
When using zgetdump on a multi-volume device dump, the sysfs path to
determine the device node is incomplete, resulting in the following
error:
$ zgetdump -i /dev/dasdb1
zgetdump: Could not open "/sys/bus/ccw/devices/0.0.9300/dasdb/dev" (No
such file or directory)
A simple fix would be to add the missing "block" part in the sysfs path.
However, the logic still assumes sysfs links like "block:" that have
been deprecated a decade ago and are no longer present on modern
systems anyway.
Therefore, the logic can greatly be improved. Create a separate function
to determine whether a device is online, remove the logic for "block:"
entries, and use libutil functions to reduce the complexity even further.
Fixes: 70a79fab3c ("zgetdump: Avoid using PATH_MAX")
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
In the process of switching to glibc defined error functions it becomes
apparent that self-defined error functions that do special things are
not in line with the output of the glibc functions.
To address this, set the prog_name variable to the last component of the
program name (stored in argv[0]) and guarantee a uniform error output.
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
In check_track_format() the base error message is the same for all cases
but has different additional content depending on which mode dasdfmt is
running.
Currently the message is compiled by using different outputs. To make it
a little bit cleaner and for a better error message handling, construct
the message string completely before passing it to the error() function
for output.
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The ERRMSG_EXIT macro is a bit clunky in its usage and a change is
necessary in order to free memory in error cases.
Create a new function error() that takes only a format string and adds
all other relevant information by itself. This function frees memory
before terminating the program with the EXIT_FAILURE exit code.
This simplifies the error handling for pretty much all calls and makes
the code a bit cleaner.
While at it, the defines EXIT_MISUSE and EXIT_BUSY don't provide any
value. Neither are they documented nor are these standardized. Also, a
parent process is mostly interessted in success or failure only anyway.
Replace these by using only EXIT_FAILURE in the error() function.
Also, change multiline output to a combination of warnx and error to
have a uniformed output. So this:
WARNING: Device is formatted with a different blocksize (4096).
Use --mode=full to perform a clean format.
becomes this:
dasdfmt: WARNING: Device is formatted with a different blocksize (4096).
dasdfmt: Use --mode=full to perform a clean format.
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
When calling dasdfmt on device node symlinks like
/dev/disk/by-id/ccw-0X9300, dasdfmt fails with "dasdfmt: the ioctl to get
the blocksize of the device failed (Bad file descriptor)"
This is because before the actual formatting process starts, the disk
will be disabled calling the BIODASDDISABLE ioctl, resulting in the
removal of the symlink. Trying to open this file later in the process to
retrieve e.g. blocksize information results in the mentioned error, as
the file doesn't exist any longer.
This incorrect behaviour was introduced with commit 8826028bdc
("dasdfmt: Use libdasd provided ioctl functions") at which the use of a
globally available file descriptor was omitted. Instead, the ioctl
library functions require a device node to be passed as a function
parameter and will open a file descriptor themselves.
So, before that change, the global file descriptor was always valid even
when the file was removed.
In order to fix this without modifying the behaviour of libdasd,
introduce the two global variables dev_node and dev_path. dev_path is
the original device path entered by the user. dev_node on the other hand
is the reliable device node under /dev/block/ using the major and minor
numbers and is determined in get_device_name().
The dev_path is used for message output only and the dev_node variable
is used for the actual disk operations.
As these two variables are global, the device parameters for several
functions are removed to make the code a bit cleaner.
Fixes: 8826028bdc ("dasdfmt: Use libdasd provided ioctl functions")
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The global program options (and other actually globally used
information) are currently passed through via function parameter
whenever this information is needed. However, in reality, this
information is used almost everywhere across the program.
Make this information globally available and get rid of all the
unnecessary function parameters for dasdfmt_info_t. This makes the code
a little bit cleaner and more readable. Also, rename the global struct
to a more suitable name.
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
dasdfmt_format() does nothing but calling process_tracks() with the same
parameters. Get rid of it, call process_tracks() directly, and avoid
confusion.
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Since commit 75e3afb6a0 ("libdasd: Move get_host_access_count() to
libdasd") dasd_get_host_access_count() reports always 0 as the check for
unsuccessful execution of util_sys_get_dev_addr() is incorrect.
Fix the behaviour by turning the check around.
Fixes: 75e3afb6a0 ("libdasd: Move get_host_access_count() to libdasd")
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
zkey-ekmfweb.so requires libekmfweb.so. If libekmfweb.so can not be built
due to missing build requirements, then zkey-ekmfweb.so can't be built
either.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Building zkey-ekmfweb.so will also trigger to build libekmfweb.so,
which requires OpenSSL. So, skip zkey-ekmfweb.so if HAVE_OPENSSL=0.
zkey-cryptsetup also has a dependency on OpenSSL, so skip it also
if HAVE_OPENSSL=0
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
chcpumf does not print out version (option -v) or help text
(option -h) when the CPU Measurement Sampling facility is not
installed. This was different up to and including release 4.10.
Fix this and hounour option -v and option -h even when
the sampling facility is not installed.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
lszcrypt now shows a card/queue which is in 'deconfigured' state as
'deconfig' in the STATE column (verbose and non verbose mode).
chzcrypt became two new options: --config-on and --config-off to
switch one or more card devices to 'configured' or 'deconfigured'
state.
Both applications are able to handle older kernels which do now
provide the config sysfs attribute required for this new feature.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This patch adds support for the "clear" sysfs attribute for nvme re-IPL,
if available. This attribute allows to control whether the memory should
be cleared on re-IPL.
Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
During using of ziorep_utilization utility for generating of CSV format output,
there is one extra comma added after Bus-ID column in virtual adapter report
for each line. This creates one extra column with empty content for each
line. As a result in CSV viewer programs 'qdio utilization max %' column has
no content, all subsequent columns have shifted content from previous
column and the last column has no header. Avoid this situation by deleting
of extra comma.
Before patch application typical line of virtual adapter report looks like:
2020-05-14 13:55:43,0,60,0.0.1906,,0.000000,0.782567,0,0,0.0,321.8,1,1251
After patch application typical line of virtual adapter report looks like:
2020-05-14 13:55:43,0,60,0.0.1906,0.000000,0.782567,0,0,0.0,321.8,1,1251
Signed-off-by: Fedor Loshakov <loshakov@linux.ibm.com>
Reviewed-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Import existing keys that are stored in EKMF Web into the zkey repository.
The keys are imported including their associated information, such as
textual description, volumes, sector size, etc.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add the possibility to list keys stored in EKMF Web that are eligible to
be used with zkey. The list of keys can be filtered by name, label,
associated volumes, state and export-ability.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
When a key is removed from the zkey repository, the state of the key in
EKMF web can optionally be changed. Keys are usually not removed in EKMF
Web, but the state of the keys are changed to e.g. DEACTIVATED.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add functions to get and set key properties (i.e. custom tags) of
keys stored in EKMF Web. The key properties are set when the information
associated with a key in the zkey repository is changed, e.g. using the
'zkey change' command.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Generate and import volume encryption keys of type CCA-AESCIPHER in
EKMF Web and import them int the zkey repository. Additional information
can be associated with the keys, such as a textual description, volumes
encrypted with the key, sector size of the volumes, etc. This is
also stored in EKMF Web with the keys as custom tags.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
To register the zkey client with EKMF Web, the X.509 certificate
generated with the identity key is sent to EKMF Web, and an identity
key object is generated in EKMF Web with the public key from the
certificate. This identity key is then used to control the export of
keys stored in EKMF Web, and to verify the cryptographically signed
requests sent by the plugin.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
To identify the zkey client with EKMF Web, an X.509 certificate must be
generated using the identity key, and must be made known to EKMF Web.
Either a self signed certificate can be generated, or a certificate
signing request (CSR) that is then passed to a certificate authority
(CA) to have a certificate issued.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The identity key of the plugin is a secure key. When the APKA master key
of the associated APQNs is changed, the identity key must be re-enciphered
under the new master key.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
To identify the zkey client with EKMF Web, the plugin generates a secure
ECC or RSA identity key, and stores it in its configuration directory.
This key is then used to cryptographically sign requests sent to EKMF Web.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Retrieve several settings from EKMF Web after the connection to
EKMF Web has been configured. This includes the EKMF Web server's
public key, which is user later on to verify cryptographically signed
responses. Also the key templates used by EKMF Web to generate keys
for zkey are retrieved, and it is checked if the require feature
'Pervasive Encryption' is available.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
To perform operations in EKMF Web, the user must log in with a EKMF Web
user id and a time based one time passcode. The passcode can be obtained
by the user from the EKMF Web user interface, after logging in into EKMF
Web. That way a two factor authentication is performed. The plugin passes
the passcode to EKMF Web retrieves a bearer token from EKMF Web which it
then uses on subsequent requests to authenticate with EKMF Web. Such a
bearer token is valid for several minutes, thus no re-login is required
for zkey commands run during that time.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Allow the user to configure the connection to the EKMF Web server
using the 'zkey kms configure' command. The communication is based
on a RESTful API via HTTPS. Besides the URL of the EKMF Web server,
other TLS related settings can be configured.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The EKMF Web plugin requires APQNs of one or multiple IBM cryptographic
adapters in CCA coprocessor mode to operate. It makes use of secure
RSA and ECC keys, and thus requires the APKA master keys of the CCA APQNs
to be set.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add support to integrate the external key management system EKMF Web
(IBM Enterprise Key Management Foundation - Web Edition) into zkey by
providing a zkey KMS plugin for EKMF Web. The plugin communicates
with EKMF Web using libekmfweb via a RESTful API.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The C-XLATE flag determines if the secure key can be used with the
CCA Cipher Text Translate2 verb. Cipher Text Translate2 deciphers
encrypted data under one key and re-enciphers it under another key
without having the data appear in the clear outside the cryptographic
coprocessor. Since this is not a security risk, the check can be
removed.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Retrieve EKMF Web settings such as the template names used by
EKMF Web for generating identity keys, as well as volume encryption
keys (XTS and non-XTS). Also check that the EKMF Web server has the
required 'Pervasive Encryption' feature installed.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
To perform operations in EKMF Web, the user must log in with a EKMF Web
user id and a time based one time passcode. The passcode can be obtained
by the user from the EKMF Web user interface, after logging in into EKMF
Web. That way a two factor authentication is performed. The client passes
the passcode to EKMF Web retrieves a bearer token from EKMF Web which it
then uses on subsequent requests to authenticate with EKMF Web. Such a
bearer token is valid for several minutes, thus no re-login is required
for zkey commands run during that time.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Allow to add, change and delete custom tags of a key. Custom tags
can be used store any kind of textual information with a key. Tags
have a name and a value.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
EKMF Web maintains a key state for each key. Keys can be in state
PRE-ACTIVATION, ACTIVE, DEACTIVATED, COMPROMISED, DESTROYED, and
DESTROYED-COMPROMISED. Key states can be changed as defined in NIST
Special Publication 800-57 Part 1.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Allow to request EKMF Web to generate a new key in its repository.
The newly generated key is generated based on the key template used.
Also, custom properties can be specified that are stored together with
the key, as well as export control information defining who is allowed
to request an export of the key later on.
Besides generating new random keys in EKMF Web, you can also register
the client's public identity key with EKMF Web by generating a new
identity key using an X.509 certificate containing the client's public
key.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Retrieve information about keys managed by EKMF Web, such as the
key algorithm, the key size and type. Additional, the key's tags
are retrieved. Label tags are used to build the label name of a key.
Custom tags can be used to store any kind of textual data together with
a key.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Key templates are used by EKMF Web to generate new keys. The template
specifies the key algorithm, the key size, and type (e.g. CCA DATA or
CIPHER). It also determines how a newly generated key is named through
a key label template containing label tags.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
To retrieve a secure key from EKMF Web, a Elliptic-curve Diffie-Hellman
(EC-DH) protocol is used to securely transport the key, without revealing
the key to be transported in clear. The key to be transported remains
encrypted all the time, either encrypted with the master key of the
cryptographic adapter on the source or target side, or with a transport
key, that is derived using the EC-DH key agreement protocol. The transport
key is also a secure key, itself encrypted with the master key of the
cryptographic adapters on both sides.
To generate the transport key, each side generates a new secure ECC
session key with its cryptographic adapter. This session keys are then
used with EC-DH to derive the secure transport key. The secure key to
be transported is then exported by EKMF Web under the transport key, is
sent to the client, and is then imported using the transport key.
The key retrieval request is signed using the identity key of the client.
EKMF Web knows the public key of the client's identity key through a one
time registration process, and can therefore verify the signature with
the client's public key. The response is also signed by the EKMF Web
server's identity key, and the client can verify the signature with the
server's public key that it retrieved once during registration.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
To identify the client with EKMF Web, an X.509 certificate must be
generated using the identity key, and must be made known to EKMF Web.
Either a self signed certificate can be generated, or a certificate
signing request (CSR) that is then passed to a certificate authority
(CA) to have a certificate issued. The certificate is then used to
register the client with EKMF Web, so that EKMF Web knows the public
part of the client's identity key.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The identity key of the client is a secure key enciphered with the
master key of a cryptographic adapter (APQN). When the master key of
the used APQNs is changed, the identity key must be re-enciphered
under the new master key.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
To identify the client with EKMF Web, the client generates a secure
ECC or RSA identity key. This identity key is then used to
cryptographically sign certain requests sent to EKMF Web.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
When login in with EKMF Web, a bearer token is retrieved from EKMF Web
which is then used on subsequent requests to authenticate with EKMF Web.
Such a bearer token is valid for several minutes, thus no re-login is
required during that time. The bearer token contains a JSON Web Token
(JWT, see RFC7519).
Allow to check such a token if it is still valid, or already expired.
That way a client application can check the token before issuing the next
request, and re-login if needed.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The EKMFWeb client library provides functions to communicate
with an EKMF Web server via REST calls over HTTPS. EKMF Web stands
for IBM Enterprise Key Management Foundation - Web Edition and is
used to manage keys in an enterprise.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Allow to refresh or update a KMS-bound key in the repository.
The secure key is re-imported from the KMS, and optionally also
its properties are updates from the KMS.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Allow to import keys that exist in a key management system into the
repository. The key together with its properties is imported.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Allow to list the keys managed by a key management system. The keys
are displayed together with the key properties stored in the KMS.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
When removing a KMS-bound key from the local repository, call the
KMS plugin and let it perform an action in the KMS. Usually keys are
not removed from key management systems, instead the key state is
changed to non-active or similar.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
When key properties are changed with the 'change' command, also update
the key properties in the KMS, if the key is bound to a KMS. Do not
allow to change the associated APQNs for KMS bound keys. KMS bound keys
inherit the APQNs from the KMS plugin.
When a key is renamed in the repository, also update the key name
property in the KMS if the key is KMS bound.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Do not allow to convert a KMS bound key. The key type of a KMS
bound key is determined by what the KMS plugin supports, thus it
can not be converted.
Do only allow to copy a KMS bound key, if the '--local' option is
specified. The result of the copy is a local key, that is not bound
to a KMS.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
When a repository that is bound to a key management system, the
keys are generated by the key management system by default. To
generate a local key, add option '--local'.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add the following sub-commands for key management system plugin
handling:
- configure: Configure a KMS plugin
- reencipher: Re-encipher secure keys used by a KMS plugin
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Some commands requires additional options that are to be determined
by the KMS plugin. Add support to let the KMS plugin provide an
option vector per command, and add the options to the already existing
command options.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add command 'kms' and the following sub-commands of it to handle
key management system plugin binding and unbinding:
- plugins: List available/configured KMS plugins
- bind: Binds a KMS plugin to the repository
- unbind: Unbinds a KMS plugin from the repository
- info: Displays information about the currently bound KMS plugin
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
To support keys that are bound to a key management system (via a KMS
plugin) add new key properties that reflect this. Display if a key is
bound to a KMS with the 'zkey list' and 'zkey validate' commands.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add support to integrate external key management systems into zkey
by using a plugin concept. Add helper functions to load, bind, and
unbind a key management system plugin.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add support for sub-commands to zkey. Sub-commands allow to group a
set of commands within a sub command.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add the -fPIC option when building the libutil objects to generate
position-independent code, and allow them to be used in dynamically
loaded shared libraries.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Acked-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add description for coordinated read access to man page as well as some
editorial changes after ID review.
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
For data consistency it is essential that datasets are not modified by
z/OS applications during zdsfs access. This is currently ensured by
manually setting the device offline in z/OS before mounting it in Linux.
This patch improves the usability and data security by making this manual
step obsolete.
Before opening a dataset zdsfs will obtain an ENQ to mark it as in use for
z/OS and release the ENQ when closing the dataset.
A timer is set up that pings the z/OSMF REST services with the ENQ to
prevent it from a timeout after 10 minutes.
The behavior of zdsfs can be configured in a new config file or with new
command line options.
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add library functions that allow to communicate with z/OSMF REST services
using libcurl.
Following three functions are added:
lzds_rest_get_enq()
to obtain an ENQ that will mark a dataset as in use to z/OS until
it is released again
lzds_rest_release_enq()
to release an ENQ and mark a dataset as no longer in use to z/OS
lzds_rest_ping()
to ping a z/OSMF REST server to check if it accessible
or to refresh an ENQ and prevent it from a timeout after 10 minutes
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Stage 3 flags is a 64bit integer but function add_ipl_program
used a 32bit integer instead. Due to this bug
STAGE3_FLAG_SCSI and STAGE3_FLAG_KDUMP were not correctly set.
Fixes: 412d3e8c ("zipl: consolidate stage3_params structs and stage3 flags")
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
libpfm does not yet include counters introduced with z15 in a release.
cpacfstatsd now implements its own counter logic to become independent
of the slow release cycles of libpfm.
Reviewd-By: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewd-By: Harald Freudenberger <freude@de.ibm.com>
Signed-off-by: Juergen Christ <jchrist@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
+ remove outdated comment that the revocation list checking is not implemented
+ improve usage example
Reviewed-by: Viktor Mihajlovski <mihajlov@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
We cannot rely on what $SHELL says as it describes what the users
default shell is and not which kind of shell /bin/sh is. So instead of
checking the environment variable $SHELL, we can test whether the
environment variable $BASH is set. If this is the case, we can be
pretty sure that the script is executed by the bash shell.
This fixes the error on Ubuntu 20.04:
./check_hostkeydoc se-certs/host-key.crt se-certs/ibm-z-host-key-signing.crt -c se-certs/DigiCertCA.crt -r se-certs/ibm-z-host-key.crl
./check_hostkeydoc: 42: set: Illegal option -o pipefail
Reviewed-by: Viktor Mihajlovski <mihajlov@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Set the counter name for z15 counter numbered 265. It is either named
DFLT_CCERROR or DFLT_CCFINISH, depending on the linux version. The
counter was renamed from CCERROR to CCFINISH in linux version 5.8.
Check for existence of file /sys/devices/cpum_cf/events/DLFT_CCERROR.
f this file exists the counter is named DFLT_CCERROR else
DFLT_CCFINISH (only for z15), other machines do not have this counter.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Modern distributions do not provide the symlink /sbin/udevadm any more.
Use /usr/bin/udevadm instead for the example init script / systemd units.
Note that those are meant for example purpose and would need to be adjusted
by distributions, so no extra effort is taken to determine the actual
location of udevadm.
Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
When udevadm is going to be used, try to locate it
in $PATH and if it fails, try to locate it in well-known
binary paths.
Signed-off-by: Guevenc Guelce <guvenc@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Commit 86856f98db ("zipl: Make use of __noreturn macro") moved the
'noreturn' attribute from declaration to definition. With this the
compiler can no longer optimize when the function is called in a
separate source file. Move the attribute back to the declaration
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Function util_opt_init() build the option string for getopt_long().
If a command has been set via util_opt_set_command(), then util_opt_init()
must honor that command and only add those options that match the command,
or are command independent.
That way the same option can be used in different commands with different
flags and different argument settings. E.g. for command 'a' option '-x'
might require an argument, for command 'b' the same option '-x' might not
require an argument.
The behavior of util_opt_init() is unchanged if no command is set, and
also if different commands use the same option, but with the same flags
and argument settings. Currently only the zkey tools set a command, but
use unique options per command.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Acked-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Remove obsolete and unused constants for zcore memory
character devices '/sys/kernel/debug/zcore/mem' and
'/sys/kernel/debug/zcore/memmap'.
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Philipp Rudo <prudo@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Fix that a misleading BLS error message is printed in any case for missing
files.
The scan_check code in zipl already does proper error handling for missing
file. Remove the duplicated error handling from scan_check_bls and just use
the function to update the file with the target path if needed.
To indicate the intention of this function also rename it.
Fixes: #84
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Tuan Hoang <tmhoang@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
When vmcp fails to execute a CP command with both error conditions
- response buffer is too small
- CP command failed
then the vmcp program exits with 'response buffer too small' indication.
However, an exit code indicating 'CP command failed' would be more
important in this case.
So change the vmcp exit code and return 'CP command failed' for above
error scenario.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
z15 architecture supports counters for ECC operations. We now add and evaluate
these counters on supported architectures. If ECC counters are not supported,
we simply print "unsupported" for ECC counter values.
Manpages adapted accordingly.
Signed-off-by: Juergen Christ <juergen.christ@ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Hard-coding udevadm's location isn't robust enough - for instance,
Ubuntu 20.04 moved it to /usr/bin.
First see if we can reach it through $PATH, then fall back to hard-coded
locations that we know about.
Also when finally falling back to udevsettle, check that it exists.
Otherwise we end up throwing tons of "No such file or directory" error
messages at the user.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Fedor Loshakov <loshakov@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Rewrite lscpumf and chcpumf in C. The previous version
habe been written in perl which require a lot of instructure.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Copying the SCSI scheme wasn't good enough due to how major/minor
numbers are assigned by the blkext driver. We now query the relevant
information via sysfs.
Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This attribute is a no-op and never provided the described functionality.
It will be removed in the 5.7 kernel release with
commit 5f4019a80839 ("s390/qeth: remove fake_broadcast attribute").
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Support is added to lsreipl to detect the nvme reipl type and list the
appropriate parameters.
Support is added to chreipl to specify and populate sysfs reipl entries
with nvme device targets.
Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The genprotimg tool doesn't yet contain code to verify IBM Secure Execution
host key documents. The sample script check_hostkeydoc outlines the steps
that need to be followed by users to verify a host key before it should
be used with genprotimg to build secure Linux images.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.ibm.com>
Reviewed-by: Patrick Steuer <patrick.steuer@de.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Printing the number zero (e.g. printf("%u", 0)) currently only gives you
an empty string. This is because the while-do loop to map the number to a
string is only entered when the value is 'true', i.e. non-zero. Fix this
by using do-while instead.
Fixes: 6fe9e6c ("zipl/libc: Introduce vsnprintf")
Signed-off-by: Philipp Rudo <prudo@linux.ibm.com>
Reported-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
nvme devices use the same on-disk bootmap as scsi devices. When the target
device is nvme (using the blkext driver) we simply treat it as scsi.
Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Let's assume the original `command_line` is 'aaaaaaaaaaaaaaaaaa' and
`cextra` is ' =blub'. With the old code this would result in the
following new command line:
'blubaaaaaaaaaaaaa' instead of the expected result 'blub\0aaaaaaaaaaaa'
Let's fix this by setting the NULL-termination for the new command
line. While at it, use the `command_line` variable instead of casting
an address.
Reviewed-by: Philipp Rudo <prudo@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The inserted blank must also be taken into account for the calculation
of `cmdline_len`. In general it's only possible to insert a blank if
the command line length is not already the maximum.
Reviewed-by: Philipp Rudo <prudo@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
`src` parameter for `memcpy` is set to `cextra + begin` but the offset
begin is not taken into account for the calculation of the length that
should be copied.
Fix this by increment the cextra pointer for each skipped whitespace
of the extra parameter.
While at it, rename `end` variable to `cmdline_len`, `command_line`
variable to `cmdline`, remove useless void pointer cast, and use
strlen instead of a while loop to determine the cmdline string length.
Reviewed-by: Philipp Rudo <prudo@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
1. `begin` is used as array index and should therefore never be greater
than COMMAND_LINE_SIZE - 1. Therefore let's fix the while condition.
2. `length` describes the string length and should therefore also never
be greater than COMMAND_LINE_SIZE - 1.
The 1. off-by-two error can lead to a out-of-bounds read and the 2.
to a buffer overflow.
Reviewed-by: Philipp Rudo <prudo@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This fixes an error when genprotimg is compiled with clang and the
sanitizers address and undefined behaviour enabled.
pv/pv_ipib.c:47:33: runtime error: member access within misaligned address 0x62100000a100 for type 'IplParameterBlock' (aka 'struct ipl_parameter_block'), which requires 4096 byte alignment
0x62100000a100: note: pointer points here
01 00 00 45 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
^
SUMMARY: UndefinedBehaviorSanitizer: undefined-behavior pv/pv_ipib.c:47:33 in
This change should be no problem as genprotimg is the only user.
Reviewed-by: Philipp Rudo <prudo@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Use STAGE2_ENTRY and PSW_LOAD instead of hard-coded values. While at
it, also move the libc.h to the top in tape2dump.c.
Reviewed-by: Philipp Rudo <prudo@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
While at it, rename PSW_SHORT_ADDR_MASK and PSW_ADDRESS_MASK to
PSW32_ADDR_MASK. As a side effect this removes the zipl.h dependency
of the boot loaders. While at it,
Reviewed-by: Philipp Rudo <prudo@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Use C pre-processor for linker script generation and refactor some
constants. This allows the usage of the constants in our "linker
scripts" `*.lds.S` (actually, these are assembler files, so we can
make us of the C pre-processor and its capabilities).
While at it, enforce the described memory layout in the generated
linker script.
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Philipp Rudo <prudo@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Move COMMAND_LINE_EXTRA to `boot/loaders_layout.h` so it can be reused
by `menu.c`and `stage3.c`. Additionally, reuse COMMAND_LINE_SIZE from
`linux_layout.h` in `menu.c`.
Reviewed-by: Philipp Rudo <prudo@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Introduce a struct definition for the stage3 parameters used by
stage3.c. This makes it easier to maintain the stage3 linker script
and it allows us to consolidate the stage3_params structs defined in
`stage3.h` and `include/boot.h` as well as the stage3 flag macros.
Reviewed-by: Philipp Rudo <prudo@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This allows the usage of stage3.h in files where other libc
implementations than our minimal libc is used, e.g. glibc.
Reviewed-by: Philipp Rudo <prudo@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This fixes cpuplugd.h:157:12: warning: redundant redeclaration of ‘debug’ [-Wredundant-decls]
157 | extern int debug; /* is verbose specified? */
| ^~~~~
cpuplugd.h:155:12: note: previous declaration of ‘debug’ was here
155 | extern int debug;
| ^~~~~
Reviewed-by: Philipp Rudo <prudo@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
In case secure boot is enabled but no components in the IPL report
are found it ends up in an endless loop in the component verification.
To prevent this check if components are found and exit if not.
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Philipp Rudo <prudo@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The lowcore parmblock pointer is not valid in every case. For example
it is invalid for CCW type IPL.
To have an indication if the pointer is valid do a diag308 to store the
parmblock and check if secure boot is enabled.
If it is enabled the lowcore pointer is valid and the ipl report that is
needed for secure boot can be found right behind the ipl parmblock.
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Philipp Rudo <prudo@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Variable names are case sensitive in Makefiles, therefore fix the typo
in the variable reference.
Fixes: 2d600570df ("genprotimg: boot: use C pre-processor for linker script generation")
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This fixes the false positive
CC zipl/src/misc.o
misc.c: In function ‘misc_temp_dev’:
misc.c:313:27: warning: ‘%04d’ directive writing between 4 and 11 bytes into a region of size 5 [-Wformat-overflow=]
sprintf(filename, "zipl%04d", retry);
^~~~
misc.c:313:22: note: directive argument in the range [-2147483648, 999]
sprintf(filename, "zipl%04d", retry);
^~~~~~~~~~
misc.c:313:4: note: ‘sprintf’ output between 9 and 16 bytes into a destination of size 9
sprintf(filename, "zipl%04d", retry);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
While at it, add an assertion that protects against a format-overflow,
e.g. if TEMP_DEV_MAX_RETRIES changes.
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Some drivers provide per-queue IRQ coalescing information, collect it.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Protected VMs (PVM) are KVM VMs, where KVM can't access the VM's state
like guest memory and guest registers anymore. Instead the PVMs are
mostly managed by a new entity called Ultravisor (UV), which provides
an API, so KVM and the PV can request management actions.
PVMs are encrypted at rest and protected from hypervisor access while
running. They switch from a normal operation into protected mode, so
we can still use the standard boot process to load an encrypted image
and then move it into protected mode.
This commit adds the tool 'genprotimg'. It takes a kernel, key files,
optionally an initrd, optionally a file with the kernel command line,
and it generates a single, loadable image file. The image consists of
a concatenation of a plain text boot loader, the encrypted components
for kernel, initrd, and cmdline, and the integrity-protected PV
header, containing metadata necessary for running the guest in PV
mode.
It's possible to use this image file as a kernel for zipl or for a
direct kernel boot using QEMU.
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Acked-by: Patrick Steuer <patrick.steuer@de.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The pod2usage function from module Pod::Usage always emits this warning
when the module is loaded, even if the funtion is not invoked at all:
The script_run feature is experimental in regex;
marked by <-- HERE in m/(*script_run: <-- HERE ^ .* $ )/
at (eval 14) line 2.
To avoid this warning every time the cpumf_helper script is invoked,
do not use function pod2usage. The use of this function has no
benefit. cpumf_helper is invoked under the covers from lscpumf and
chcpumf, so it is sufficient to print the help text in case a wrong
parameter has been supplied.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
`linux/asm/types.h` also defines the struct `__vector128` so in order
to avoid definition conflicts add the macro guard _S390_TYPES_H, which
is defined in `linux/asm/types`. `linux/asm/types.h` is included by
glib2, which is used by the PV tooling.
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add IBM Z15 extended counter definition file to Makefile
DATA_FILES list.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Format and print HBA FC Endpoint Security trace records with a record ID
of ZFCP_DBF_HBA_FCES (5). Align output to the one of FSF response trace
records for readability. Note that the FSF protocol status is most likely
FSF_PROT_GOOD (0x00000001).
Signed-off-by: Jens Remus <jremus@linux.ibm.com>
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add support to report Fibre Channel (FC) Endpoint Security
related information for zfcp-host and zfcp-lun devices.
Allow to query (lszdev) and provide help for (chzdev) the FC Endpoint
Security capability of a FCP device (zfcp-host). Provide this
information by defining the FCP device attribute fc_security in zdev
zfcp-host.
Allow to query (lszdev) and provide help for (chzdev) the FC Endpoint
Security in use on a connection between a FCP device and a FC remote
port. Provide this information by introducing a virtual zdev zfcp-lun
attribute fc_security. It returns the fc_security attribute value of
the zfcp port object representing the FC remote port used to access the
LUN.
This approach allows users of lszdev to easily query the FC Endpoint
Security in use on the connections to one or more FCP LUNs. It also
does not require the effort to introduce a zfcp-port device type in
zdev.
The fc_security attribute help for both zfcp-host and zfcp-lun can be
queried for example as follows:
chzdev zfcp --help-attribute
The fc_security attribute values and path of all active zfcp devices
can be queried for example as follows:
lszdev zfcp -a -c TYPE,ID,ATTR:fc_security,ATTRPATH:fc_security
Signed-off-by: Jens Remus <jremus@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Fedor Loshakov <loshakov@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
As preparation for a following commit reorder the path logic in function
zfcp_lun_st_get_active_attrib_path(). This then allows to handle
subsequent special cases more easily. Additionally it also enhances the
readability of the expression.
Signed-off-by: Jens Remus <jremus@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reviewed-by: Fedor Loshakov <loshakov@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add support for defining read-only attributes in the chzdev/lszdev
tools. These attributes can be used to provide online documentation
for specific attributes via the --help-attribute and --list-attributes
tool functions.
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Reviewed-by: Fedor Loshakov <loshakov@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add support for the placement of the stage3b loader at other addresses
than 0xa000. For this add a position independent relocator that first
copies the original stage3b code to the memory location 0xa000 and
then starts it.
Reviewed-by: Philipp Rudo <prudo@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Use C pre-processor for linker script generation. This allows the
usage of constants in our "linker scripts" `*.lds.S` (actually, these
are assembler files, so we can make us of the C pre-processor and its
capabilities).
Suggested-by: Philipp Rudo <prudo@linux.ibm.com>
Reviewed-by: Philipp Rudo <prudo@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add a boot loader for protected virtualization (PV) that can be
combined with a kernel/initrd/parmfile to form a single bootable file.
This file must be constructed in a way that it can be used (1) for a
QEMU direct kernel boot and (2) it can be zipl'ed by the normal,
unmodified zipl program.
This new boot loader consists of two parts:
1. stage3a boot loader (cleartext), this loader is responsible for
the transition into the protected mode by doing diag308 subcode 8
and 10 calls.
2. stage3b boot loader (encrypted), this loader is very similar to the
normal zipl stage3 boot loader. It will be loaded by the Ultravisor
after the successful transition into protected mode. Like the zipl
stage3 boot loader it moves the kernel and patches in the values
for initrd and parmline.
The requirements for (1) and (2) result in the following constraints:
1. It must be possible to place stage3a and stage3b at a location >=
0x10000 because the zipl stage3 loader zeroes out everything at
addresses lower than 0x10000 of the image.
2. As the stage3 loader of zipl assumes that the passed kernel image
looks like a normal kernel image, the zipl stage3 loader modifies the
content at the memory area 0x10400 - 0x10800, therefore we leave this
area unused in our stage3a loader.
3. The default entry address used by the zipl stage3 loader is 0x10000
so we add a simple branch to 0x11000 at 0x10000 so the zipl stage3
loader can modify the area 0x10400 - 0x10800 without affecting the
stage3a loader.
The stage3b loader is linked at address 0x9000, therefore it will not
work at another address. The relocation support for the stage3b
loader, so that it can be placed at addresses != 0x9000, is added in
the next patch. This loader with relocation support has the name
'stage3b_reloc'.
The memory layout of the single bootable file looks like:
+-----------------------+-----------+------------------------+
|Start |End |Use |
+=======================+===========+========================+
|0 |0x7 |Short PSW, starting |
| | |instruction at 0x11000 |
+-----------------------+-----------+------------------------+
|0x10000 |0x10012 |Branch to 0x11000 |
+-----------------------+-----------+------------------------+
|0x10013 |0x10fff |Left intentionally |
| | |unused |
+-----------------------+-----------+------------------------+
|0x11000 |0x12fff |Stage3a |
+-----------------------+-----------+------------------------+
|0x13000 |0x13fff |IPIB used as argument |
| | |for the diag308 call |
+-----------------------+-----------+------------------------+
|0x14000 |0x1[45]fff |UV header used for the |
| | |diag308 call (size can |
| | |be either 1 or 2 pages) |
+-----------------------+-----------+------------------------+
|NEXT_PAGE_ALIGNED_ADDR | |Encrypted Kernel |
+-----------------------+-----------+------------------------+
|NEXT_PAGE_ALIGNED_ADDR | |Encrypted Cmdline |
+-----------------------+-----------+------------------------+
|NEXT_PAGE_ALIGNED_ADDR | |Encrypted Initrd |
+-----------------------+-----------+------------------------+
|NEXT_PAGE_ALIGNED_ADDR | |Encrypted Stage3b_reloc |
+-----------------------+-----------+------------------------+
Reviewed-by: Philipp Rudo <prudo@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Consolidate `ALIGN, __ALIGN_MASK, ARRAY_SIZE` macros and add them to
lib/zt_common.h. While at it, adapt coding style.
Reviewed-by: Philipp Rudo <prudo@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add support for new deflate counters:
- Counter 247: cycles CPU spent obtaining access to Deflate unit
- Counter 252: cycles CPU is using Deflate unit
- Counter 264: Increments by one for every DEFLATE CONVERSION CALL
instruction executed.
- Counter 265: Increments by one for every DEFLATE CONVERSION CALL
instruction executed that ended in Condition Codes
0, 1 or 2.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add `sclp_print_ascii` function that can be used to print output on
the SCLP ASCII console. This would increase the size of the
loaders (e.g. eckd2.bin and fba2.bin) and therefore might break the
compilation. In order to avoid that add a macro 'ENABLE_SCLP_ASCII'
which must be defined by the users of the `sclp_print_ascii` function.
Reviewed-by: Philipp Rudo <prudo@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This allows the reuse of the code later in sclp.c. While at it, also
declare @source parameter of `ebcdic_to_ascii` function as `const` and
rename all `ebc_` function name prefixes into `ebcdic_`. Move
conversion tables to separate file so it only gets linked into loaders
that need it.
Reviewed-by: Philipp Rudo <prudo@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Errors fixed:
../../include/boot/s390.h: In function '__stfle_asm':
../../include/boot/s390.h:424:41: error: conversion to 'long unsigned int' from 'int' may change the sign of the result [-Werror=sign-conversion]
register unsigned long reg0 asm("0") = size - 1;
../../include/boot/s390.h: In function 'stfle':
../../include/boot/s390.h:453:31: error: conversion to 'long unsigned int' from 'int' may change the sign of the result [-Werror=sign-conversion]
nr = MIN((nr + 1) * 8, size * 8UL);
../../include/boot/s390.h: In function 'diag308':
../../include/boot/s390.h:296:9: error: conversion from 'long unsigned int' to 'int' may change value [-Werror=conversion]
return _rc;
Reviewed-by: Philipp Rudo <prudo@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Now that we made sure that s390.h can be used with our minimal libc
implementation and glibc move s390.h to `include/boot/s390.h`. While
at it, make sure that s390.h is assembler compatible as it will be
used later in the PV boot loader and include s390.h in ipl.h as
PAGE_SIZE is used there.
Reviewed-by: Philipp Rudo <prudo@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This allows the use of s390.h in combination with other libc
implementations than our minimal libc, e.g. with glibc.
Reviewed-by: Philipp Rudo <prudo@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Rename `inline` macro into `__always_inline` so one can differentiate
between the macro and the C keyword. While at it, undefine the
previous `__always_inline` macro so s390.h can be used in combination
with glibc.
Reviewed-by: Philipp Rudo <prudo@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Move the loaders (stage2/stage3) layout values to
`include/boot/loaders_layout.h` and use the `_AC` macro for the
constants. This allows the reuse of the definitions, e.g. in assembler
files, and later for the creation of linker scripts.
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Philipp Rudo <prudo@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Use STAGE3_ENTRY for STAGE3_LOAD_ADDRESS as they have the same value
and this makes it more clear that the load address of stage3 is also
its entry point.
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Philipp Rudo <prudo@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Use the constants defined in `linux_layout.h`. Therefore move the
`PARMAREA` address offset to `linux_layout.h` and include the header.
Reviewed-by: Philipp Rudo <prudo@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Move the Linux layout values to `include/boot/linux_layout.h`. This
allows the reuse of the definitions, e.g. in assembler files, and
later for the creation of linker scripts.
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Philipp Rudo <prudo@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Make `IPL_DEVICE` definition consistent with the kernel definition and
the definition in tape0.S. This allows us to refactor the code later.
Reviewed-by: Philipp Rudo <prudo@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Move the IPL related definitions into `include/boot/ipl.h`. This
allows the reuse of the definitions, e.g. in the boot loader for
protected guests.
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Philipp Rudo <prudo@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Support `lib/zt_common.h` to be used in assembler files. In addition,
add the macro `_AC` that can be used to make constant macros usable in
both assembler and C code.
Suggested-by: Philipp Rudo <prudo@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Philipp Rudo <prudo@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This can be helpful when diagnosing network performance issues.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The secure= option is not supported in the defaultboot section when a
menu is used. It should be placed in the menu section in this case.
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The use of sprintf can easily result in buffer overflows as it assumes
that the buffer it writes to is large enough to contain the formatted
string. Thus replace sprintf by snprintf and update its users.
This removes the last user of vsprintf. Thus also remove vsprintf and
its dependencies.
Signed-off-by: Philipp Rudo <prudo@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Per definition vsprint assumes that the provided buffer it writes to is
large enough to contain the formatted string. As printf uses a fixed
sized buffer (81 bytes) and has no size checks the use of vsprintf can
easily cause buffer overflows. Protect against these buffer overflows by
using vsnprintf instead.
While at it fix a typo in the comment.
Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Philipp Rudo <prudo@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The zipl boot loaders have their own minimalistic libc implementation.
In it printf and sprintf use vsprintf for string formatting. Per
definition vsprintf assumes that the buffer it writes to is large enough
to contain the formatted string and performs no size checks. This is
problematic for the boot loaders because the buffer they use are often
allocated on the stack. Thus even small changes to the string format can
potentially cause buffer overflows on the stack with the well known
consequences. Protect against such errors by implementing vsnprintf.
Later patches will make use of it.
This implementation of vsnprintf only supports a small subset of format
options defined in the C standard. In particular it allows the
specifiers:
* %s (strings)
* %o (unsigned int octal)
* %u (unsigned int decimal)
* %x (unsigned int hexadecimal)
Integer specifiers (o, u, and x) always use the long form, i.e. assume the
argument to be of type 'unsigned long int'. The length modified 'l' can
be given but is ignored.
Furthermore, it is possible to provide the optional field width (aligned
to the right only) and precision as decimal integer (i.e. not via '*')
as well as the flag for zero padding integers (i.e. '0').
The implementation was heavily inspired by the implementation in
lib/vsprintf.c from the Linux kernel tree.
Signed-off-by: Philipp Rudo <prudo@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
A simple comment above the struct declaration to indicate that the
structure must not have any padding is prone to error. Therefore let's
add a check for the structure size at compile time.
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This also makes sure that we don't try to write to the
/sys/bus/pci/device/<dev>/recover attribute if reset failed.
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
After a zpcitctl --reset the PCI function is currently left in an error
state. This seems unexpected, so follow the SCLP reset with an OS level
recovery using /sys/bus/devices/<dev>/recover.
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Use after free causes the XTS attribute to be displayed wrongly.
Fixes: 298fab68fe ("zkey: Preparations for introducing a new key type")
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Different crypto card types use different ways to re-encipher a secure
key with a new master key. Generalize the handling of re-enciphering,
so that the majority of the code does not have to care about the card
type when dealing with it.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
EP11 secure keys require a certain firmware version. Enhance
the APQN cross check to not only check for a minimum card level,
but also for a minimum firmware version.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add a new source file that contains EP11 specific helper routines.
These routines require to load the EP11 host library.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Different crypto card types use different serial number formats.
Generalize the handling of serial numbers so that the majority of the
code does not have to care about the card type when dealing with it.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Different crypto card types use different master key verification patterns
(MKVPs). Generalize the handling of MKVPs so that the majority of the
code does not have to care about the card type when dealing with MKVPs.
Also generalize messages about the crypto card's master keys to not
mention a specific card type.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
EP11 cards provide the firmware version and API ordinal number as
a sysfs attribute on the crypto card level. Add a helper function
that obtains the firmware version and API ordinal number from there.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
As preparation for adding support for EP11 secure keys,
generalize the code to support different crypto card types.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The zkey list function uses scandir() to look for files in the
zkey key repository directory. It checks the dirent.d_type field
to consider only regular files, but skip all others.
Unfortunately, not all file systems have full support for returning
the file type in d_type. When the zkey repository is located in a file
system that does not support d_type, such as xfs, zkey list shows no
keys, although the key repository contains keys.
Fix this by also considering directory entries with d_type = DT_UNKNOWN.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
zipl creates a temp bootmap file to keep the original file in case of an
error. Delete this temp file in case of an error.
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Philipp Rudo <prudo@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The hierarchy of the secure boot settings in the config file should be:
defaultboot > menu > section
This patch implements this hierarchy and adds a check if a valid option is
specified and prints an error message otherwise.
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Philipp Rudo <prudo@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Allow that --secure or -S is specified on command line without the need to
allow all options on the command line.
Also ensure that the command line option overrules the config option and
correctly ensure that secure boot is only set for SCSI devices.
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Philipp Rudo <prudo@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The zkey convert command must select an CCA adapter out of the
list of associated APQNs (if any) to perform the key conversion.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
As the definition of `stfle_fac_list` in the lowcore uses uint64_t, we
should also use uint64_t for the `stfle_fac_list` parameter of the
`stfle/__stfle_asm` function.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Use '$(MAKE)' to pass down the makefile flags.
This fixes the warning:
make[4]: warning: jobserver unavailable: using -j1. Add '+' to parent make rule.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Philipp Rudo <prudo@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
dasd_is_ro() uses the O_RDWR flag when opening the file descriptor.
However, an attempt to open the file descriptor of a device that is in
read-only state will fail and the BLKROGET ioctl that is used to
actually determine the read-only state can't be issued.
Change the flag to O_RDONLY to fix this.
Fixes: a5c1923d32 ("libdasd: Add common DASD ioctl's to the lib")
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The help output for 'zkey generate' has a typo in the description
of the '-N, --name' option mentioning a non-existing '-M' option.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
An invalid APQN like '01.00xx' is not treated as invalid, but results
in APQN '01.0000'. Fix the checking to treat such invalid APQNs as
invalid.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
In error cases, dasdview returns -1 which results in the return value
255. This is due to the fact that only the low-order 8 bits are used for
the status value. See 2.13 Status Information [1] in the POSIX standard
and the exit() POSIX man page [2] for more details.
Instead of returning -1, use the EXIT_FAILURE constant to indicate
unsuccessful termination properly. This change also makes the exit
status consistent for all error cases in dasdview, as some exit() calls
already use EXIT_FAILURE.
[1]: https://pubs.opengroup.org/onlinepubs/9699919799/functions/V2_chap02.html
[2]: https://pubs.opengroup.org/onlinepubs/9699919799/functions/exit.html
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Increase consistency with the other macros by moving and renaming
the STAGE{2,3} macros in zipl.h.
Signed-off-by: Philipp Rudo <prudo@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Make use of the pre-defined __packed macro throughout zipl. This
requires adding the global include dir to ALL_CFLAGS.
Signed-off-by: Philipp Rudo <prudo@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
When adding new header from zipl/include to a .c file within zipl/boot
a compiler error appears
stage3.c:16:10: fatal error: zipl.h: No such file or directory
#include "zipl.h"
^~~~~~~~
compilation terminated.
CC zipl/boot/stage3.o
This is because the rule to generate dependencies (*.o.d) does not use
the CFLAGS_BOOT. Thus it cannot find the header and fails. Note this
only applies to the dependency generation, the actual build succeeds.
To fix this rename the CFLAGS_BOOT to ALL_CFLAGS. Using ALL_CFLAGS
instead of e.g. ALL_CPPFLAGS is important to also overwrite flags given
on the commandline via OPT_FLAGS, e.g.
make V=1 OPT_FLAGS="-D__FOO__"
While at it also remove the unused and wrong '-D__ASSEMBLY__'.
Fixes: 5a6605fe ("zipl: Ensure that boot loader CFLAGS are not overwritten")
Fixes: aa913b1e ("build process: Add automatic dependency generation")
Signed-off-by: Philipp Rudo <prudo@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Currently zipl doesn't differentiate between the load address and the
entry point of an image, causing stage3 to strip away the entry point at
0x10000 for stand-alone kdump. This breaks the kdump kernel as it jumps
to 0x10000 after the special handling needed for kdump has been
performed.
Fix this by differentiating between the load address and the entry point
of an image.
Fixes: d142fbd5 ("zipl: Do not strip kernel image IPL header")
Signed-off-by: Philipp Rudo <prudo@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The __packed__ attribute is not needed for these structures as they
don't need any padding to meet the size and alignment constraints
defined in the Linux for zSeries ABI.
Reported by GCC 9.2.1 when building with '-Waddress-of-packed-member'.
stage3.c: In function 'is_verified_address':
stage3.c:241:26: warning: taking address of packed member of 'struct ipl_rb_components' may result in an unaligned pointer value [-Waddress-of-packed-member]
241 | for_each_rb_entry(comp, comps) {
| ^~~~~
stage3.c:18:15: note: in definition of macro 'for_each_rb_entry'
18 | for (entry = rb->entries; \
| ^~
CC zipl/boot/kdump3.o
CC zipl/boot/sclp_stage3.o
sclp_stage3.c: In function '__sclp_hsa_copy':
sclp_stage3.c:75:34: warning: converting a packed 'struct sdias_sccb' pointer (alignment 1) to a 'struct read_sccb' pointer (alignment 4096) may result in an unaligned pointer value [-Waddress-of-packed-member]
75 | if (sclp_hsa_copy_wait((struct read_sccb *)sccb))
| ^~~~~~~~~
In file included from sclp_stage3.c:13:
sclp_stage3.h:43:8: note: defined here
43 | struct sdias_sccb {
| ^~~~~~~~~~
In file included from sclp_stage3.c:12:
sclp.h:149:8: note: defined here
149 | struct read_sccb {
| ^~~~~~~~~
sclp_stage3.c: In function 'sclp_hsa_get_size':
sclp_stage3.c:126:34: warning: converting a packed 'struct sdias_sccb' pointer (alignment 1) to a 'struct read_sccb' pointer (alignment 4096) may result in an unaligned pointer value [-Waddress-of-packed-member]
126 | if (sclp_hsa_copy_wait((struct read_sccb *)sccb))
| ^~~~~~~~~
In file included from sclp_stage3.c:13:
sclp_stage3.h:43:8: note: defined here
43 | struct sdias_sccb {
| ^~~~~~~~~~
In file included from sclp_stage3.c:12:
sclp.h:149:8: note: defined here
149 | struct read_sccb {
| ^~~~~~~~~
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reported by GCC 9.2.1 when building with '-Waddress-of-packed-member'.
menu.c: In function 'menu_read':
menu.c:30:22: warning: taking address of packed member of 'struct boot_stage2_params' may result in an unaligned pointer value [-Waddress-of-packed-member]
30 | uint16_t *configs = __stage2_params.config;
| ^~~~~~~~~~~~~~~
menu.c: In function 'menu_list':
menu.c:83:22: warning: taking address of packed member of 'struct boot_stage2_params' may result in an unaligned pointer value [-Waddress-of-packed-member]
83 | uint16_t *configs = __stage2_params.config;
| ^~~~~~~~~~~~~~~
menu.c: In function 'menu':
menu.c:139:22: warning: taking address of packed member of 'struct boot_stage2_params' may result in an unaligned pointer value [-Waddress-of-packed-member]
139 | uint16_t *configs = __stage2_params.config;
| ^~~~~~~~~~~~~~~
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reported by GCC 9.2.1 when building with '-Wmaybe-uninitialized'.
job.c: In function 'job_get':
job.c:1817:14: warning: 'filename' may be used uninitialized in this function [-Wmaybe-uninitialized]
1817 | scan_size = scan_file(filename, &scan);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
job.c:1791:14: note: 'filename' was declared here
1791 | const char *filename;
| ^~~~~~~~
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reported by GCC 9.2.1 when building with '-Wdiscarded-qualifiers'.
job.c: In function 'get_job_from_config_file':
job.c:1810:14: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers]
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
When calling ziomon --version (or --help) the tool already checks
whether blktrace is present and prevents any output for those command
options when it isn't. This is unnecessary as no actual command is
issued during the parameter check and all other dependencies are checked
at a later point as well.
Move the dependency check to ensure a working --version and --help
option at any time.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
In the BLS files, the 'linux' and 'initrd' fields are relative to the
$BOOT directory. If $BOOT is a mount point of boot partition, 'linux'
and 'initrd' fields are relative to boot partition. If not, the paths
are relative to $BOOT directory of root partition.
zipl always starts searching at / regardless of partitions and mount
points.
This commit extends the semantics of target= field in zipl.conf to make
it as a second search path, besides /, for those 2 BLS fields.
See issues #69 for more details.
Fixes: https://github.com/ibm-s390-tools/s390-tools/issues/69
Closes: https://github.com/ibm-s390-tools/s390-tools/pull/74
Signed-off-by: Tuan Hoang <tmhoang@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The zipl config file (zipl.conf) and the BootLoaderSpec (BLS) fragments
in /boot/loader/entries define a set of tokens that are parsed by zipl.
These are stored in an array of tokens whose size is calculated to make
sure that there is enough memory allocated for all the scanned tokens.
But the size calculation logic was wrong, since it was checking if the
current size was enough to store a single token per BLS fragment, while
up to 4 tokens can be defined in a BLS file: a section heading and the
image, ramdisk and parameter keywords.
This led to zipl being killed by a SIGABRT signal when trying to parse
more tokens than the ones that could fit in the scanned tokens array:
Using config file '/etc/zipl.conf'
Using BLS config file '/boot/loader/entries/vmlinuz-9.conf'
Using BLS config file '/boot/loader/entries/vmlinuz-8.conf'
Using BLS config file '/boot/loader/entries/vmlinuz-7.conf'
Using BLS config file '/boot/loader/entries/vmlinuz-6.conf'
Using BLS config file '/boot/loader/entries/vmlinuz-5.conf'
Using BLS config file '/boot/loader/entries/vmlinuz-4.conf'
Using BLS config file '/boot/loader/entries/vmlinuz-3.conf'
Using BLS config file '/boot/loader/entries/vmlinuz-2.conf'
Using BLS config file '/boot/loader/entries/vmlinuz-1.conf'
Using BLS config file '/boot/loader/entries/vmlinuz-0.conf'
double free or corruption (out)
Aborted (core dumped)
Fixes: https://github.com/ibm-s390-tools/s390-tools/issues/68
Closes: https://github.com/ibm-s390-tools/s390-tools/pull/73
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This can be helpful in diagnosing network-related issues.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The basic statistics are already collected via ifconfig. But that tool
is deprecated, and provides no way of collecting the extended stats.
So also gather data from 'ip link'.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The duplicate statement does not have any effect. Therefore remove it.
Signed-off-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
When a secure key has been converted from type CCA-AESDATA to type
CCA-AESCIPHER, the secure key stored in the LUKS2 header of a volume
encrypted with that key should also changed.
Command 'zkey-cryptsetup setkey' allows to set (replace) the volume
key in the LUKS2 header. It now accepts keys to be set that have
a different size of the original volume keys. CCA-AESCIPHER keys
are larger than CCA-AESDATA keys.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add a new 'convert' command. It allows to convert a secure key from
one key type to another. Currently only keys of type CCA-AESDATA can be
converted to CCA-AESCIPHER.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Perform extended checks on a secure key that is imported into
the key repository. Warn the user if the imported key is by
any means insecure, e.g. has been originally created in an
insecure way. Prompt the user to continue the import if a
potential insecurity is detected.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The helper function performs a deep check of the AES CIPHER key
token and checks for any potentially insecure attributes.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Secure keys of type CCA-AESCIPHER can be export restricted, so that
these keys can not be exported by another key.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Some future functions are dependent on the firmware version of the
CCA crypto adapter. This helper function allows to query the version
of the currently selected CCA adapter.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Secure keys of type CCA-AESCIPHER require a CEX6C or newer crypto
card. Also check for the minimum required card level during cross
checking of APQNs. Also display the card level in the APQN report.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
For secure keys of type CCA-AESCIPHER the CCA verb CSNBKTC2
(Key Token Change2) is used. CCA-AESDATA keys will continue
to use CCA verb CSNBKTC (Key Token Change).
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add support for validating secure keys using the new pkey
IOCTLs. This allows to validate secure keys of type CCA-AESDATA
as well as CCA-AESCIPHER.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add support for generating secure keys using the new pkey
IOCTLs. This allows to generate secure keys of type CCA-AESDATA
as well as CCA-AESCIPHER, either by random inside the crypto
card, or from a given clear key.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The new IOCTLs are based on list of APQNs that they try to send
the request to. Add some helper functions to build such lists
of APQNs based on the key type, and optionally a given mkvp.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
By default the new pkey IOCTL are used. In case the pkey device does not
support the new IOCTLs (i.e. errno ENOTTY is returned), then the wrapper
falls back to the old IOCTLs. The old IOCTLs only support secure keys of
type CCA-AESDATA.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add definitions and helper functions to support the new
CCA-AESCIPHER key type. Also enhance existing helper functions
to support CCA-AESCIPHER keys.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Introduce helper functions and definitions to allow key type
independent code in the keystore implementation
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The zkey generate command allows to specify the --key-type|-K
option to specify the key type. If not specified, then the
default is CCA-AESDATA.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The zkey list command now accepts option --key-type|-K type
to filter the displayed keys by key type. If not specified,
then all key types are displayed.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
For the 'zkey list', 'zkey validate' and 'zkey-cryptsetup validate'
commands, display the key type.
As of today there is only one possible key type (CCA-AESDATA),
but in the future there might be additional key types.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This patch adds CEX7S exploitation support to lszcrypt and chzcrypt.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
To allow better control about the secure AES volume key re-enciphering
with 'zkey-cryptsetup reencipher', add options '--to-new' and '--from-old'
to specify if a re-enciphering from CURRENT to NEW, or OLD to CURRENT master
key registers is to be performed. If these options are not specified, then
it is auto-detected, based on the master key that the secure key is currently
re-enciphered with.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
When re-enciphering secure AES keys, select the correct APQN for used
with the CCA host library. Re-enciphering a secure key requires the use
of the CCA host library. The APQN is selected based on the master key
verification pattern obtained from the secure key to re-encipher.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add a utility function to select an APQN that is set up with
a specific master key for use with the CCA host library. The
selection is based on the master key verification pattern, which
is typically obtained from an existing secure AES key.
The function iterates over a set of APQNs to find one that is setup
with the desired master key in the CURRENT or OLD master key register,
and optionally has a new master key loaded. It then selects the found
APQN for use with the CCA host library.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Some operations require the CCA host library to be used, such as
re-enciphering a secure key. The CCA host library uses a different
approach to select the APQN it operates with. To ensure that the
desired APQN is used for an operation, a utility function is added
to select a specific APQN for usage with the CCA host library.
The CCA host library allows to set environment variables to override
the default CCA APQN selection. The environment variables are inspected
during CCA host library initialization only. To select a specific
domain for CCA, the CSU_DEFAULT_DOMAIN environment variable is set,
and then the CCA host library is un-loaded and re-loaded again.
Furthermore, the 'Cryptographic Resource Allocate' verb of the CCA
host library is used together with the 'Cryptographic Facility Query
function' verb to iterate over the crypto cards known by the CCA host
library, and to identify the desired crypto card based on its serial
number. That way, a specific APQN can be selected for use with
subsequent CCA verbs.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Perform a cross check of the APQNs when the APQN association of a
secure AES key in the key repository is changed. When adding new APQNs,
or associating a new set of APQNs to a secure key, then the APQNs are
cross checked. If all associated APQNs are removed, then all currently
available APQNs are cross checked. If a master key mismatch is detected,
then the change is rejected.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Perform a cross check of the APQNs when an existing secure AES key is
imported into the key repository. When a set of APQNs are associated to
the imported secure key, these APQNs are cross checked. If no APQNs are
associated to imported secure key, then all currently available
APQNs are cross checked. If a master key mismatch is detected, then
the key import is rejected.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Perform a cross check of the APQNs when a secure AES key is validated.
When a set of APQNs are associated to a secure key, these APQNs are
cross checked. If a secure key is validated outside of the key repository,
or no APQNs are associated to a secure key inside the key repository,
then all currently available APQNs are cross checked. If a master key
mismatch is detected, then an error message is issued.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Perform a cross check of the APQNs when a new secure AES key is
generated. When a set of APQNs are associated to a new secure key,
these APQNs are cross checked. If a new secure key is generated
outside of the key repository, or no APQNs are associated to a secure
key generated inside the key repository, then all currently available
APQNs are cross checked. If a master key mismatch is detected, then
the key generation is rejected.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Display the master key verification pattern of a secure key while
'zkey validate' and 'zkey-cryptsetup validate'
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
A secure AES key token contains the master key verification pattern
of the master key it is encrypted with. Add a function to obtain the
master key verification pattern of a secure key token.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add a utility function to cross check the master keys of a set of
APQNs. It checks for valid master keys in the CURRENT and OLD
master key registers, as well as newly loaded master keys in the NEW
register. It issues information and warning messages for various
findings and also indicates improper master key setup to the caller.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add a utility function to print the master key verification patterns
of a set of APQNs. This allows the user to visually check which
master keys are set on which APQNs.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add a utility function to iterate over all available APQNs of
type CCA-Coprocessor. This function is required for various
future enhancements.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
With recent changes in the zcrypt device driver, the master key verifi-
cation patterns of the AES master key of am APQN can be obtained by
reading the sysfs attribute 'mkvps' of an APQN device of type CCA-
Coprocessor. The sysfs attribute can be found under
'/sys/devices/ap/cardnn/nn.mmmm/', where nn specifies the card number
in hex, and mmmm specifies the domain number on hex.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
With recent changes in the zcrypt device driver, the serial number of
a crypto card can be obtained by reading the sysfs attribute 'serialnr'
of a crypto card device of type CCA-Coprocessor. The sysfs attribute
can be found under '/sys/devices/ap/cardnn/', where nn specifies the
card number in hex.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
As preparation for future changes, move a sysfs specific functions
into a separate source file (utils.c).
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
As preparation for future changes, rework the loading of the
CCA host library so that the exported symbols are not passed
individually to the functions that use it. Pass a structure
that contains all entry points of all loaded CCA functions
instead. This will make it easier to add further CCA functions
at a later time.
Also add a version query for the CCA host library since some
future functions might be dependent on the library version.
While at it, separate the CCA related functions and definitions,
and move them into a separate source file (cca.h/cca.h).
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
...
==9448== 32 bytes in 1 blocks are definitely lost in loss record 1 of 3
==9448== at 0x4831010: malloc (vg_replace_malloc.c:309)
==9448== by 0x48E2205: __vasprintf_internal (vasprintf.c:71)
==9448== by 0x1005061: misc_asprintf (misc.c:48)
==9448== by 0x10131F3: disk_get_info (disk.c:239)
==9448== by 0x1013C41: disk_get_info_from_file (disk.c:517)
==9448== by 0x1011C87: bootmap_create (bootmap.c:1127)
==9448== by 0x1004C73: main (zipl.c:192)
...
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This patch adds ethtool commands for network interfaces.
Especially the offload settings are important.
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This patch adds the base lspci command to list pci devices
and the smc_dbg command from the smc-tools package to show
SMC socket related information.
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
zdev incorrectly reports an invalid udev rule for zfcp-lun type rules.
This is caused by a faulty check for an empty udev rule file. This
commit fixes the check to only report invalid rules when there was no
valid configuration directive found in a zfcp-lun type udev rule.
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reported-by: Steffen Maier <maier@linux.ibm.com>
Reported-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Show '[y/N]' on all user confirmation prompts to give the user a
hint what to reply. Also indicate that the operation was aborted
on a negative confirmation.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The volume type of a secure key is not really case sensitive,
but for better usability store and display it in uppercase always,
regardless in whatever case it was specified.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The zfcp dumper fails with the following error:
MLOPDM003I: Machine loader finished, moving data to final storage
location.
uncompression error
--- System halted
HCPGIR450W CP entered; disabled wait
PSW 00020001 80000000 00000000 DEADBEEF
The zipl command shows overlapping components when installing the dumper
to a zfcp disk:
zipl -d /dev/sda1
Building bootmap directly on partition '/dev/sda1'
Adding dump section
kernel image......: /lib/s390-tools/zfcpdump/zfcpdump-image
kernel parmline...: 'root=/dev/ram0 dump_mem=1 possible_cpus=1
cgroup_disable=memory '
component address:
heap area.......: 0x00002000-0x00005fff
stack area......: 0x0000f000-0x0000ffff
internal loader.: 0x0000a000-0x0000dfff
parameters......: 0x00009000-0x000091ff
kernel image....: 0x00010000-0x005761ff
^^^^^^
parmline........: 0x00567000-0x005671ff
^^^^^^
Preparing boot device: sda.
Done.
With the secure IPL patchset the offset of the kernel image has been
removed for the normal IPL case but it has not been removed for the dump
image which leads to the overlap of 0x10000.
Fix by removing the offset for the dump case.
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewd-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Tested-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Make dasdfmt aware of thinly provisioned (Extent Space Efficient (ESE))
DASD volumes.
If an ESE volume is recognised a QUICK format is performed, formatting
only the first two tracks. The mode can always be overwritten by --mode.
Previously allocated space is always released before formatting, if not
specified otherwise. The option --no-discard (-D) is provided to omit
the space release.
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The BIODASDRAS (Release Allocated Space) ioctl allows to release
track-wise or full space of an Extent Space Efficient DASD volume.
Provide a library function to utilise this functionality.
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Provide a function to determine whether a DASD is an Extent Space
Efficient (ESE) volume.
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Move definitions mostly used by IOCTLs to libdasd. Clean up unused and
old definitions while at it as well.
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add basic checking when reading udev rules and print a warning when an
invalid udev rule file is found. This addresses the current inconsistent
behavior:
- CCW devices: invalid udev rules are considered valid
- CCW group devices: invalid udev rules are silently ignored
- zFCP LUNs: invalid rules cause chzdev/lszdev to silently terminate
with non-zero exit code
Checks include a test for empty or truncated rule files that might be
the result of an interrupted chzdev operation, or a file system or I/O
error.
Note: The recommended way to correct invalid udev rules is to either
remove the offending rules file, or to repeat the associated persistent
configuration step.
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reported-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The zipl internal loader adds a variable BOOT_IMAGE= to the commandline
so that it is visible in the operating system which menu entry has been
chosen.
This entry was overwritten by the stage3 parameter page.
Fix by re-arranging the internal memory layout and putting the command
line extra param, which contains the BOOT_IMAGE entry, at 0xe000.
This location is available because less than one page is used for the
stack.
Fixes: https://github.com/ibm-s390-tools/s390-tools/issues/67
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
When 'zkey generate' is used with options '--clearkey <file>' and
'--xts', but without the '--keybits <bitsize>' option, then the
auto-detection of the bitsize of the specified clear key fails.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Dependent on kernel config option CHSC_SCH the device node /dev/chsc may
exist per default or not. In case the kernel is built with CHSC_SCH=M,
then the device driver is built as separate kernel module, and must
therefore be loaded using modprobe chsc_sch to make device node /dev/chsc
available.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Currently the zipl tool doesn't remove trailing spaces from the BLS field
values. So for example if a 'title' field has trailing spaces and is used
as the default, zipl will complain that there's no section with that name:
Using config file '/etc/zipl.conf'
Using BLS config file '/boot/loader/entries/f871a0cf218348c5ba921f61c92b7eac-4.18.0-80.20.el8.s390x.conf'
Using BLS config file '/boot/loader/entries/f871a0cf218348c5ba921f61c92b7eac-0-rescue.conf'
Error: Config file '/etc/zipl.conf': Line 6: no such section 'Red Hat Enterprise Linux (4.18.0-80.20.el8.s390x) 8.1 (Ootpa)'
Since the trailing spaces are also removed from the fields defined in the
zipl.conf file, do the same for the ones that are defined in the BLS file.
Closes: https://github.com/ibm-s390-tools/s390-tools/pull/62
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add support for CPU-Measurement facility counter second version
number 6. This adds some more counters to the crypto counter set.
Extended counter set is the same as for z14.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The util_opt_example allows to specify '-l' and '-m, --manual' options,
but does not handle them. This leads to error message 'PANIC: The
application terminated due to an unrecoverable error' with 'Option 'l'
should not be handled here' and the program is aborted.
Add the required case statements in the switch to handle those options.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The zfcp kernel module was changed to introduce separate parameters for
selecting DIF and DIF&DIX. This commit implements the corresponding
changes in chzdev and lszdev.
Signed-off-by: Fedor Loshakov <loshakov@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
When directory $SYSFSDIR/bus/ccwgroup does not exist znetconf issues an
error message and terminates. Its not even possible to get the output of
--help or --version. Fix that by moving the responsible check behind the
parameter evaluation.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The validate command should allow to specify the --no-apqn-check
option even when --apqns is not specified.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The stfle inline assembly returns the number of double words written
(condition code 0) or the double words it would have written
(condition code 3), if the memory array it got as parameter would have
been large enough.
The current stfle implementation assumes that the array is always
large enough and clears those parts of the array that have not been
written to with a subsequent memset call.
If however the array is not large enough memset will get a negative
length parameter, which means that memset clears memory until it gets
an exception and the system crashes.
To fix this simply limit the maximum length. Move also the inline
assembly to an extra function to avoid clobbering of register 0, which
might happen because of the added MIN invocation together with code
instrumentation.
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The header exit_code.h is required for the exit_code_t type and
the header misc.h for the err_t type.
Signed-off-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The function util_path_exists() consumes its first parameter as format
string. Passing the user input specified to the chzdev option --export
as-is to the function opens up the possibility for a format string
injection.
Fixes: d542138868 ("zdev: use libutil provided path functions")
Signed-off-by: Jens Remus <jremus@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Testing whether a file is a directory by comparing the struct stat
field st_mode against S_IFDIR is wrong. If st_mode has any access
permission bits set along with the file type code the test will always
fail.
The file type encoded in the struct stat field st_mode is actually an
enumeration. To test whether a file is a directory either extract the
file type from st_mode using the mask S_IFMT and compare it against
S_IFDIR or simply use the macro S_ISDIR().
Fixes: b627b8d8e1 ("Initial s390-tools-2.0.0 import")
Signed-off-by: Jens Remus <jremus@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Testing whether a file is a directory by masking the struct stat field
st_mode with S_IFDIR is wrong. Depending on the values of the macros
S_IF* block special devices might be considered as directories.
The file type encoded in the struct stat field st_mode is actually an
enumeration. To test whether a file is a directory either extract the
file type from st_mode using the mask S_IFMT and compare it against
S_IFDIR or simply use the macro S_ISDIR().
Fixes: c944f23d7e ("zkey: Add keystore implementation")
Signed-off-by: Jens Remus <jremus@linux.ibm.com>
Acked-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The functions use the C99 _Bool type in form of the alias bool from
stdbool.h as return type. Scalars are implicitly converted to _Bool.
Values equal to zero to 0 (false). Nonzero values to 1 (true).
Therefore the explicit conversion using the ternary operator ?: with
true and false is not required.
Signed-off-by: Jens Remus <jremus@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Testing whether a file is a directory or a regular file by masking the
struct stat field st_mode with S_IFDIR or S_IFREG is wrong. Depending
on the values of the macros S_IF* sockets and symbolic links might
erroneously be considered as regular files and block special files as
directories.
The file type encoded in the struct stat field st_mode is actually an
enumeration. To test whether a file is a directory or a regular file
either extract the file type from st_mode using the mask S_IFMT and
compare it against S_IFDIR or S_IFREG or simply use the macros S_ISDIR()
and S_ISREG().
Fixes: b627b8d8e1 ("Initial s390-tools-2.0.0 import")
Signed-off-by: Jens Remus <jremus@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Since commit d542138868 ("zdev: use libutil provided path functions")
lszdev fails to correctly report most read-only sysfs attributes as such
in its detailed information output (options -i or -ii). This is because
the libutil function util_path_is_writable() is not equivalent to the
former function file_writable().
util_path_is_writable() always returns true (the underlying function
access() indicates the file is writable), if the path exists and the user
is root, regardless of the path's effective access permissions. This is
correct for most use cases, as root can effectively read/write any path
regardless of its effective access permissions). util_path_is_writable()
behaves exactly like Bash -w in this regard.
The former function file_writable() examined the file's access permissions
to check if one or more of user, group, and other have write permission.
For lszdev it is irrelevant whether a file is effectively writable by
the current user. Instead it needs to determine whether sysfs attributes
access permissions contain write access in any form. If not it lists
those sysfs attributes in a separate read-only section.
Use the new function util_path_is_readonly_file(), which does explicitly
check the file's effective read and write access permissions. It behaves
similar to the former function file_writable(), except that it does test
whether any of user, group, and other have read permission.
Fixes: d542138868 ("zdev: use libutil provided path functions")
Signed-off-by: Jens Remus <jremus@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
For root the functions util_path_is_readable() and util_path_is_writable()
do not take the path's permissions into account. The function access()
succeeds as root is allowed to read/write any file regardless of its
permissions.
Introduce the functions util_path_is_readonly_file() and
util_path_is_writeonly_file() to test whether a path is a regular file and
is either read-only (neither user, group, nor other have write permission,
but one or more of user, group, and other have read permission) or
write-only (neither user, group, nor other have read permission, but one
or more of user, group, and other have write permission).
Signed-off-by: Jens Remus <jremus@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The file pointer in the functions is_online() and cpu_is_configured() is
only freed in the good case. Make sure it is always freed.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
bootmap.c: In function ‘check_secure_boot_support’:
bootmap.c:131:2: warning: ignoring return value of ‘fscanf’, declared
with attribute warn_unused_result [-Wunused-result]
fscanf(fp, "%d", &val);
^~~~~~~~~~~~~~~~~~~~~~
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
zpcictl.c: In function ‘sysfs_read_value’:
zpcictl.c:154:2: warning: ignoring return value of ‘fscanf’, declared with
attribute warn_unused_result [-Wunused-result]
fscanf(fp, "%x", &val);
^~~~~~~~~~~~~~~~~~~~~~
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add option --no-apqn-check to the generate, import, change, and
validate commands to disable checking of the specified APQNs.
With this option a currently non-existing APQN can be associated
with a key. This is useful to associate APQNs that exist only on
other systems, such as disaster recovery systems, but not on the
current system. When generating keys, at least one of the specified
APQNs must be available to generate the key.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Function get_payload_records() reading from disk, blindly adds payload
record (junks) to a list in a 2-stage hierarchical hash keyed with
request ID and PAY area.
On adapter offline/online, zfcp resets the request ID to re-start with 1.
Hence it's not a unique foreign key in the lifetime of the PAY area.
The last payload record (junks) read for the same request ID and PAY area
is the one printed as named PAY field in the tool output.
This is not necessarily the chronologically last record due to PAY area
wrapping.
With this workaround, we:
* warn on reading PAY records if ambiguous entries occurred,
* print additional PAY timestamps which the user can compare
with the actual trace record timestamps to determine if they are close
enough to indicate a match.
We only found this by accident because we kept "short" "payload" being a
built-in part of some actual trace record types in areas HBA, SAN, SCSI.
For above cases, the full PAYload did not match the
built-in "short" "payload".
While at it, also add a comment that PAY output can also be wrong
in another case when junks of multi-part PAY records are missing due
to PAY area wrapping.
Below is an abbreviated example output with this workaround:
Loading trace records ...(this might take a while)
Warning: Ambiguous PAYload records. reqid:0000000000000037 area:san_res
...
Timestamp : 2017-07-07-18:01:34:574827
Area : SAN
...
Tag : fssct_1
Request ID : 0x0000000000000037
Destination ID : 0x00fffffc
SAN req short : 01000000 fc020000 01720ffc 00000000
00000008
SAN req length : 20
Timestamp : 2017-07-07-18:01:34:619310 ------------------+
Area : SAN |
... |
Tag : fsscth2 |
Request ID : 0x0000000000000037 |
Destination ID : 0x00fffffc |
SAN resp short : 01000000 fc020000 80020000 00000000 |
00671a07 00000000 c05076ff d6801850 |
00671a7e 00000000 c05076ff d6801968 |
SAN resp length: 16384 |
Payload time : 2017-07-07-18:16:17:165708 <== does not match
San resp info : 01000000 fc020000 80020000 00000000 <== wrong
4a49424d 20202020 20323936 34202020 <== wrong
20202020 20202020 20303230 30303030 <== wrong
30303745 43383720 20504348 49443a20 <== wrong
30313938 204e5049 5620556c 7049643a <== wrong
20303536 30303330 30202020 00000000 <== wrong
00000000 00000000 00000000 00000000 <== wrong
... <== wrong
...
Timestamp : 2017-07-07-18:16:17:165713
Area : SAN
...
Tag : fsscth2
Request ID : 0x0000000000000037 <== same reqid & pay "area"
Destination ID : 0x00fffffc
SAN resp short : 01000000 fc020000 80020000 00000000
4a49424d 20202020 20323936 34202020
20202020 20202020 20303230 30303030
SAN resp length: 273
Payload time : 2017-07-07-18:16:17:165708 <== 2nd & last, match
close to Timestamp
San resp info : 01000000 fc020000 80020000 00000000
4a49424d 20202020 20323936 34202020
20202020 20202020 20303230 30303030
30303745 43383720 20504348 49443a20
30313938 204e5049 5620556c 7049643a
20303536 30303330 30202020 00000000
00000000 00000000 00000000 00000000
...
Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reading DASD specific sysfs attributes should be collected in one
library. Move get_host_access_count() to libdasd/dasd_sys.
Remove the old implementation and update any user accordingly.
Also, fix the build order for zdsfs.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Use the newer and more robust libutil provided function
util_sys_get_dev_addr() to identify a device address for any former user
of u2s_getbusid().
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Many tools need to identify the device address of a given device. So
far, either the tool had its own implementation, or u2s_getbusid() was
used. Though, u2s_getbusid() was mainly designed for and used by the
DASD tools.
Introduce util_sys with a first function util_sys_get_dev_addr() which
provides a more universal way to identify the device address which is
not limited to one particular device type. The device address represents
either a busid (e.g. DASD), slot address (NVMe), H:C:T:L tuple (SCSI),
or other id types associated with a device.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
dasdview and libdasd deal with DASD bus ids and should use a definition
for the size. libu2s already provides a definition, which is used by
dasdview. However, the size of 32 is a bit much and the definition
should be part of libdasd.
Including the terminating null byte ('\0') and considering a DASD bus id
length of 8 characters (e.g. 0.0.4711), this leads to a size of 9.
Provide such a definition via libdasd and update any user.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Don't rely on rather arbitrary values for the string buffer size of
different sysfs paths. Instead use util_path_sysfs(), which allocates
the exact amount of memory necessary for a certain path string.
As these path strings are dynamically constructed, potential buffer
overflows can hereby be avoided and make the library functions more
robust.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add zipl and zipl.conf man page updates.
The zipl man page will look like:
-S <SWITCH> or --secure <SWITCH>
Control the zIPL secure boot support. <SWITCH> can take one of three values:
auto (default)
Write signatures if available and supported by the system.
1
Signatures are written independent of support indicated by the local
system. Also missing signatures for stage 3 and kernel IPL files
will result in an error.
0
No signatures will be written.
The zipl.conf man page will look like:
secure = auto/1/0 (configuration only)
Configuration section:
Control the zIPL secure boot support. Set this option to one of the following:
- auto: Write signatures if available and supported by the system.
- 1: Signatures are written independent of support indicated by the local system.
Also missing signatures for stage 3 and kernel IPL files will result in an error.
- 0: No signatures will be written.
The default value for 'secure' is auto.
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Acked-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
To ensure that only verified code is executed the stage 3 loader has
to check if the load psw points to an address that has previously been
verified by the machine loader.
If secure boot is enabled the IPL process will only continue if the
verification was successful.
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Acked-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The firmware needs to know which memory locations are used by
the stage 3 loader so that it can allocate its own memory.
To indicate the usage of the heap and stack area of the stage 3 loader
add a dummy component to block this memory area for the firmware.
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Acked-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The stage 3 loader size has to be a multiple of the filesystem
blocksize so that the signature maps with the later in memory
stage 3 loader. The lowest common blocksize is 4k so the image
is padded to a 4k boundary.
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Acked-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add a command line option and configuration section keyword to control
the zIPL secure boot support. This option is named "secure" and can take
one of three values:
auto (default)
Write signatures if available and supported by the system.
1
Signatures are written independent of support indicated by the local
system. Also missing signatures for stage 3 and kernel IPL files
will result in an error.
0
No signatures will be written.
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add support for parsing IPL file signatures as produced by the Linux
kernel's sign-file tool. When preparing a disk for IPL, the signatures
will be added as separate data components that can be used by the Secure
Boot firmware feature to validate the integrity of the IPL files.
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Change the fixed component entry text array to a more dynamic approach
to allow easier extension and make the order changeable.
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The first component that gets control after IPL is the zIPL-provided
stage 3 boot loader. This boot loader is based on a binary image linked
into the zIPL executable. When preparing a disk for IPL, zIPL updates
runtime parameters in the boot loader image and writes the resulting
data to disk.
To support the Secure Boot firmware feature, the stage 3 code must be
signed, and can therefore no longer contain variable parameter portions.
Also the boot loader image should be accessible as a separate file to
enable the use of external programs for creating the signature.
This patch moves the stage 3 boot loader code to an external file
location and splits out the parameter portion into a separate, unsigned
on-disk component.
The new memory layout of the stage 3 loader during its execution looks
as follows:
* 0x0000-0x1fff Lowcore
* 0x2000-0x5fff Memory allocation (heap)
* 0x7000-0x8fff free
* 0x9000-0x9fff Stage3 parameter
* 0xa000-0xcfff Stage3 code
* 0xd000-0xefff Section: bss, rodata, data
* 0xf000-0xffff Stack
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The binary Linux kernel image is built to be loaded to memory address
0x0 but the first 64 kbyte contain an IPL header that is not used for
disk IPL. zIPL strips away this IPL header when writing IPL records to
disk, loads the remaining data to memory address 0x10000 and uses the
memory area below that for its own boot loader code.
The Secure Boot firmware feature checks the integrity of an installed
image during IPL using a checksum that was generated for the full image.
Since the checksum becomes invalid if the IPL header is removed, zIPL
must be changed to write the full image to disk.
This patch modifies the zIPL logic to no longer strip away the IPL
header. Instead the full image is loaded to a higher memory address and
relocated by the stage 3 boot loader code to its final location.
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
When a 'zkey change' command is used to change (i.e. set) the volume
association of a key, and the new volume association contains a volume
that is already assigned to the key to be changed, the command fails
with an error that the volume is already associated to the key.
This commit fixes the problems and allows to set such a volume
association. When setting a new association the current association of
the key to be changed is of no relevance, since the set operation
replaces the current association with the new association.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
s390-tools-1.9.0 introduced a new way of recognizing of multipath
device paths with using of sed command invocation in ziomon script.
With this new way of recognizing, if there are paths, related to
multipath device, with SCSI host ID longer, than one digit,
ziomon incorrectly parses the multipath -l command output. It
erroneously cuts off all but the least significant digit of the
SCSI host ID (H) of paths in H:B:T:L format (Host:Bus:Target:Lun).
This leads to passing of hosts (-a) and paths (-l) with
non-existing SCSI host ID to ziomon_util. In turn ziomon_util
cannot recognize hosts with non-existing SCSI host ID and issues
an error.
Also, wrong sed command invocation could lead to receiving of
duplicate LUNs by ziomon after parsing of multipath -l command
output. Then ziomon excludes duplicates from WRP_LUNS, which
leads to mismatch between number of LUNs and number of detected
block devices and issues ziomon script error, without starting
ziomon_util and without writing to specified log file.
The regular expression to match a path in H:B:T:L format started
with a greedy ".*", which erroneously consumed parts of the SCSI
host ID (H). This patch replaces the greedy ".*" by "[^0-9]*",
so that sed command does not consume parts of the SCSI host ID
any more.
Test example with unique SCSI host IDs:
$ multipath -l
...
mpathc (36005076307ffc5e300000000000083f5) dm-2 IBM ,2107900
size=20G features='1 queue_if_no_path' hwhandler='0' wp=rw
`-+- policy='service-time 0' prio=0 status=active
|- 10:0:0:1089814659 sdb 8:16 active undef running
`- 11:0:0:1089814659 sdf 8:80 active undef running
...
Behavior without fix applied:
$ ziomon -d 5 -o log /dev/mapper/mpathc
Check devices...done
NOTE: No size limit specified, run without a limit.
Estimated maximum disk space required for log data: approx. <1 MBytes
Collecting configuration data...done
Start data collection processes...ziomon_util: Path does not exist: /sys/class/scsi_host/host0/utilization - correct kernel version?
ziomon_util: Path does not exist: /sys/class/scsi_host/host0/utilization - correct kernel version?
ziomon_util: Path does not exist: /sys/class/scsi_host/host0/queue_full - correct kernel version?
ziomon_util: Path does not exist: /sys/class/scsi_host/host1/utilization - correct kernel version?
ziomon_util: Path does not exist: /sys/class/scsi_host/host1/queue_full - correct kernel version?
failed
ziomon: Failed to determine ziomon_util pid
Shutting down
Shutting down blktrace process
Shutting down blkiomon process
Shutting down ziomon_zfcpdd process
blkiomon: terminated by signal
Shutting down data manager
User can see more information, when using ziomon with -V option:
...
=== WRP_LUNS : 0:0:0:1089814659 1:0:0:1089814659
=== WRP_HOST_ADAPTERS: host0 host1
...
=== starting ziomon_util: ziomon_util -V -a 0 -a 1 -l 0:0:0:1089814659 -l 1:0:0:1089814659 ...
...
User can also see this type of errors, while using
ziorep_traffic or ziorep_utilization tools:
$ ziorep_traffic -t1 log.log
Extracting config data...done
ziorep_traffic: Could not retrieve initial data - data files corrupted or broken, or the .agg file is missing.
Behavior with fix applied:
$ ziomon -d 5 -o log /dev/mapper/mpathc
Check devices...done
NOTE: No size limit specified, run without a limit.
Estimated maximum disk space required for log data: approx. <1 MBytes
Collecting configuration data...done
Start data collection processes...done
Collecting data...done
Shutting down
Shutting down data manager
User can see more information, when using ziomon with -V option:
...
=== WRP_LUNS : 10:0:0:1089814659 11:0:0:1089814659
=== WRP_HOST_ADAPTERS: host10 host11
...
=== starting ziomon_util: ziomon_util -V -a 10 -a 11 -l 10:0:0:1089814659 -l 11:0:0:1089814659 ...
...
Test example with duplicate SCSI host IDs:
$ multipath -l
...
mpathc (36005076307ffc5e300000000000083f5) dm-1 IBM ,2107900
size=20G features='1 queue_if_no_path' hwhandler='0' wp=rw
`-+- policy='service-time 0' prio=0 status=active
|- 0:0:0:1089814659 sdb 8:16 active undef running
`- 10:0:0:1089814659 sdf 8:80 active undef running
...
Behavior without fix applied:
$ ziomon -d 5 -o log /dev/mapper/mpathc
Check devices...done
ziomon: Number of LUNs does not match number of devices: 2 devices and 1 LUNs
User can see more information, when using ziomon with -V option:
...
=== #Devices total : 2
=== WRP_DEVICES : /dev/sdb /dev/sdf
=== WRP_LUNS : 0:0:0:1089814659
=== WRP_HOST_ADAPTERS: host0
...
Behavior with fix applied:
$ ziomon -d 5 -o log /dev/mapper/mpathc
Check devices...done
NOTE: No size limit specified, run without a limit.
Estimated maximum disk space required for log data: approx. <1 MBytes
Collecting configuration data...done
Start data collection processes...done
Collecting data...done
Shutting down
Shutting down data manager
User can see more information, when using ziomon with -V option:
...
=== #Devices total : 2
=== WRP_DEVICES : /dev/sdb /dev/sdf
=== WRP_LUNS : 0:0:0:1089814659 10:0:0:1089814659
=== WRP_HOST_ADAPTERS: host0 host10
...
=== starting ziomon_util: ziomon_util -V -a 0 -a 10 -l 0:0:0:1089814659 -l 10:0:0:1089814659 ...
...
Signed-off-by: Fedor Loshakov <loshakov@linux.ibm.com>
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
In case a regular directory was specified, rather than a device node,
the check if the device exists will pass. The following code paths then
assume a slot id was specified. This in turn may lead to a buffer
overflow when the device data is copied to to the zpci_device struct.
Check if the specified path is a regular directory and prevent a
possible later buffer overflow and copying wrong data respectively.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Also mark FCP devices with CHPID that is logically varied off,
e.g. after running "chchp -v 0 60".
Such FCP devices can be online, not failed, and are not defunct,
so the other existing markers do not appear.
Shows potential issues with FCP devices at one glance.
Examples:
$ lszfcp -He
0.0.1900 host0 NotAvailable
$ lszfcp -HeV
/sys/devices/css0/0.0.010d/0.0.1900 NotAvailable
/sys/class/fc_host/host0
/sys/class/scsi_host/host0
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Complements: 4036e80b26 ("lszfcp: add new output marker for non-good FCP devices (hosts)")
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The zcryptstats tool displays usage statistics of IBM Crypto Express
adapters. It obtains cryptographic performance measurement data
periodically and displays the data for each cryptographic device for
each interval. A cryptographic device can be either a card device or
a queue device (APQN).
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
I often use "systool -v -m zfcp" but that's a bit longish to type
and contains more output than just the parameters I'm interested in.
"tail /sys/module/zfcp/parameters/*" is also not so nice.
"lszfcp -Z" makes it very easy and can be combined with the other
existing output options of lszfcp.
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Since zfcp lazily allocates Scsi_Host et al. on setting an FCP device
online for the first time since the last driver core bind to zfcp
(such as zfcp kernel module load),
lszfcp has only been showing FCP devices (vHBAs) that have been online
at least once including those that have been set offline again.
This is somewhat confusing.
Also it would be nice if lszfcp could be an easier to type replacement for
"lscss -t 17032/03" to simply show all devices bound to the zfcp device
driver.
Of course those FCP devices that have never been online, won't have any
zfcp-specific attribute details, only CIO attributes from the CCW bus.
They also do not have a Scsi_Host nor fc_host.
In order not to break any scripting or expectations around lszfcp,
make the new feature depend on the extended output command line option.
Example:
$ lszfcp -He
0.0.1880 - offline
$ lszfcp -HeV
/sys/devices/css0/0.0.010b/0.0.1880 offline
-
-
$ lszfcp -Hea
0.0.1880 - offline
Bus = "ccw"
availability = "good"
cmb_enable = "0"
cutype = "1731/03"
devtype = "1732/03"
modalias = "ccw:t1731m03dt1732dm03"
online = "0"
uevent = "DRIVER=zfcp"
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Fedor Loshakov <loshakov@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
s390-tools-1.8.1 introduced a new error message.
It gave the same and thus misleading error message as if no FCP device
(vHBA) found.
In order not to break any scripting built around lszfcp output,
only print the fixed error message depending on the extended output
command line option.
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
s390-tools-1.8.0 introduced a regression skipping all FCP devices
that are currently "defunct".
Changing
$SYSFS/devices/css0/*/*/host*
to
$SYSFS/devices/css0/[0-9]*/[0-9]*/host*
was too strict as it won't match
$SYSFS/devices/css0/defunct/[0-9]*/host*
anymore.
Fix:
$SYSFS/devices/css0/[0-9d]*/[0-9]*/host*
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
s390-tools-1.8.1 introduced a regression skipping all fc_rports
with port_state != Online. While we need to skip some output parts
for a zfcp_port which does not exist anymore due to port_remove,
there are other cases with port_state != Online for which we should
not skip an fc_rport.
Such as port_state "Blocked" after a cable pull beyond host-adjacent switch
or port_state "Not Present" after dev_loss_tmo ran out.
This way the user can see the previously discovered ports,
even if they might currently not be usable for traffic.
Non-good ports are marked in the short output with suffix "NotOnline".
In order not to break scripting or expectations around lszfcp, make the new
feature depend on the extended output command line option.
Sysfs path globbing does not work for a removed zfcp_port
to obtain the FCP device bus-ID. Instead, properly walk the sysfs.
Examples with a removed zfcp_port:
$ lszfcp -Pe
0.0.50c0/0x500507680b2481fa rport-6:0-2
$ lszfcp -PeV
- (NoMoreZfcpPort:0.0.50c0/0x500507680b2481fa)
/sys/class/fc_remote_ports/rport-6:0-2
Examples with an existing zfcp_port but pulled fibre:
$ lszfcp -Pe
0.0.3c40/0x500507680b2181fb rport-7:0-4
$ lszfcp -PeV
/sys/devices/css0/defunct/0.0.3c40/0x500507680b2181fb
/sys/class/fc_remote_ports/rport-7:0-4
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Used in subsequent patches to guard their changes in order not to break
any scripting or expectations around the lszfcp output format.
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
When re-enciphering or setting LUKS2 volume keys using zkey-cryptsetup,
allow to specify the --batch-mode|-q option to suppress confirmation
questions.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
For LUKS2 volumes the cryptsetup command currently generates
'cryptsetup luksFormat' commands, but for plain mode volumes it
generates 'cryptsetup plainOpen' commands.
With the --open option it can now also generate 'cryptsetup luksOpen'
commands for opening LUKS2 volumes. With the --format option you can
limit the generated commands to only generate 'cryptsetup luksFormat'
commands for LUKS2 volumes, and skip plain mode volumes.
The default behavior (i.e. if none of the two options specified),
remains the same as before.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
When generating crypttab entries for LUKS2 volumes, allow to
specify common passphrase options like --key-file, --keyfile-offset,
--keyfile-size and --tries and pass those to the generated crypttab
entries.
Note that not all distributions support the keyfile-offset and
keyfile-size options in crypttab entries.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
For some device driver SysFS attributes, values read may not be
acceptable input values for that attribute.
An example would be the group of qeth VNICC attributes that return "n/a"
when VNICC setup is not supported, but only accept "0" and "1" as valid
values that can be written to it.
This leads to errors such as the following when data for such attributes
is imported:
# chzdev f500 --import test.conf
Importing configuration data from test.conf
QETH device 0.0.f500:0.0.f501:0.0.f502 configure failed
Error: Invalid value for qeth attribute: vnicc/flooding=n/a (*)
Acceptable values:
- Integers in the range 0 - 1
Use 'chzdev qeth --help-attribute vnicc/flooding' for more information
Note: You can use --force to override safety checks (*)
To fix this, change chzdev's --export function to skip any attribute
value that is not acceptable for that attribute.
Fixes: e831269e74 ("zdev: Add support for VNIC Characteristics")
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Remove 'hash=plain' option for plain type entries, add 'none luks'
for LUKS type entries.
Note that the format of a crypttab entry is distribution specific.
On some distributions only the first 2 fields are required, the
remaining are optional, on other distributions all 4 fields are
required. With this patch correct crypttab entries are generated
for all distributions.
Closes: https://github.com/ibm-s390-tools/s390-tools/pull/55
Fixes: https://github.com/ibm-s390-tools/s390-tools/issues/57
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
With libcryptsetup version 2.1 a new debug level was introduced
to log the JSON structures when adding key slots, digests, etc
into the LUKS2 header.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Messages from libcryptsetup for logging level CRYPT_LOG_DEBUG
do not include an EOL.
Prior to libcryptsetup version 2.1 debug messages were not printed
through the log callback, but using printf directly within
libcryptsetup. Now they are also printed through the log callback,
but without an EOL terminating the text.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
For zkey-cryptsetup commands reencipher and setkey, use the
same password-based key derivation function (PBKDF) when
creating unbound key-sots that the key slot uses, which was
unlocked through the specified passphrase. That way the
unlocked key slots created by these commands inherit the
PBKDF from the existing key slot.
This feature requires libcryptsetup version 2.1 or later.
If an older libcryptsetup version is available at compile
time, then PBKDF2 is used for newly created unbound key slots.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The output of lsof command is sometimes too long and makes it difficult
to search in runtime.out. Move the output to a separate file.
Signed-off-by: Sa Liu <saliu@de.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Running lscpumf -i as regular user causes a warning when trying to
disply sampling buffer sizes. The root cause is in the cpumf_helper
that returns "0,0" instead of a list reference "[0,0]".
This happened when running as regular user because the sampling buffer
size sysfs attribute is not readable for them.
Remove the shortcut and always return a list reference.
Signed-off-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
LUKS2 encrypted volumes use Argon2i as default password based key
derivation function (PBKDF). Argon2i is a so-called memory-hard
function. It requires a certain amount of physical memory to make
dictionary attacks more costly.
Unfortunately, when multiple encrypted volumes are unlocked
automatically during system startup via /etc/crypttab, the use of
Argon2i will most likely cause an out-of-memory error in systemd.
To avoid the out-of-memory error, use PBKDF2 instead. Because PAES
uses secure keys as volume keys, the security of the key derivation
function used to derive the key to encrypt the volume key in the LUKS
key slots is of less relevance. Thus it is safe to use a weaker key
derivation function.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
LUKS2 encrypted volumes use Argon2i as default password based key
derivation function (PBKDF). Argon2i is a so-called memory-hard
function. It requires a certain amount of physical memory to make
dictionary attacks more costly.
Unfortunately, when multiple encrypted volumes are unlocked
automatically during system startup via /etc/crypttab, the use of
Argon2i will most likely cause an out-of-memory error in systemd.
To avoid the out-of-memory error, use PBKDF2 instead. Because PAES
uses secure keys as volume keys, the security of the key derivation
function used to derive the key to encrypt the volume key in the LUKS
key slots is of less relevance. Thus it is safe to use a weaker key
derivation function.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
When a user that is in the zkeyadm group, but is not the owner
of the key file changes a key in the zkey repository, then
error "Operation not permitted" occurs. This is due to a superfluous
call to chmod on the key file. When key files are changed then the
permissions of that file are retained anyway.
Also fix a typo in the error message when chmod fails.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Enable zdsfs to access datasets that were created after zdsfs was
mounted without the need to remount zdsfs.
This is done by re-reading the VTOC with every readdir system call.
To ensure a consistent VTOC state the DASD device is reserved for
every VTOC read and released afterwards.
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Added some explanations about the columns shown with the
lszcrypt verbose output.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Show how to use util_rec_set_indent() and util_rec_print_separator()
in util_rec_example.c
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
In wide format the header is separated from the rest of the
records by a separator line. Add support to print such a
separator line also between some records.
Add function util_rec_print_separator() that prints the
separator line for wide format only. For other formats this
is a NOP.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Acked-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Functions rec_print_xxx allows to print records in
different formats. Add support to optionally indent
the output by a specific number of characters.
The indention is set using a new function util_rec_set_indent().
The default indention is zero, thus existing applications
will behave the same as before.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Acked-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The cmsfs_write function only writes a single record in line mode
and returns the number of bytes it consumed from the input buffer.
This is valid behaviour as the write system call can always return
with a partial write. But there are tools that ignore the return
value of the write and just assume that a single write call is
sufficient to write many lines aka records on the cmsfs filesystem.
Enhance the cmsfs_write function to loop until all lines from the
input buffer have been consumed.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
GCC8 shows the following compile warning:
cmsfs-fuse.c: In function ‘convert_text’:
cmsfs-fuse.c:2558:19: warning: passing argument 2 to restrict-qualified
parameter aliases with argument 4 [-Wrestrict]
rc = iconv(conv, &data_ptr, &in_count, &data_ptr, &out_count);
^~~~~~~~~ ~~~~~~~~~
Fix this by using a separate buffer for iconv. The buffer size depends on
the record format: variable-length records have a maximum length of
MAX_RECORD_LEN (plus 1 byte for linefeed), while fixed-length records
could be larger in theory. This patch takes that into account for the iconv
buffer, but the rest of the code currently cannot handle fixed-length records
larger than MAX_RECORD_LEN.
Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Commit aefc8cd3ff ("libutil/libu2s: Move strlcpy() implementation to
libutils") added a dependency to libutil. This is not necessary and
could potentially lead to parallel build errors. Remove the dependency.
Fixes: aefc8cd3ff ("libutil/libu2s: Move strlcpy() implementation to libutils")
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
There are several reasons why an operation might fail. Either the
running kernel, the PCI function itself, or the hypervisor lacks support
for a certain operation. In such cases the kernel returns either with
EIO or EOPNOTSUPP.
The corresponding warning, however, just says the file couldn't be
closed. Display a warning for EIO and EOPNOTSUPP to tell the user about
the missing support.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Make the error message when the CCA library is missing more
user friendly. Also display an URL where the CCA package
can be downloaded.
The CCA library is used for the REENCIPHER commands of
zkey and zkey-cryptsetup and must be installed separately
as part of the IBM CCA Host Libraries and Tools package.
This packages is not provided by the distributors, but must
be downloaded from an IBM web page and installed separately.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Get rid of the following GCC8 compile warning by using different buffers
for input/output:
In file included from vmdump_convert.cpp:13:
vm_dump.h: In member function ‘void VMDump::ebcAsc(char*, size_t)
const’:
vm_dump.h:145:26: warning: passing argument 2 to restrict-qualified
parameter aliases with argument 4 [-Wrestrict]
iconv(ebcdicAsciiConv, &inout, &len, &inout, &len);
^~~~~~ ~~~~~~
vm_dump.h:145:34: warning: passing argument 3 to restrict-qualified
parameter aliases with argument 5 [-Wrestrict]
iconv(ebcdicAsciiConv, &inout, &len, &inout, &len);
^~~~ ~~~~
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Get rid of the following GCC8 compile warning by using different buffers
for input/output:
qethqoat.c: In function ‘ebctoasc’:
qethqoat.c:51:30: warning: passing argument 2 to restrict-qualified
parameter aliases with argument 4 [-Wrestrict]
iconv(l_iconv_ebcdic_ascii, &inout, &len, &inout, &len);
^~~~~~ ~~~~~~
qethqoat.c:51:38: warning: passing argument 3 to restrict-qualified
parameter aliases with argument 5 [-Wrestrict]
iconv(l_iconv_ebcdic_ascii, &inout, &len, &inout, &len);
^~~~ ~~~~
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Make sure there are two different buffers passed to iconv() to get rid
of the following GCC8 compile warning:
helper.c: In function ‘ht_ebcdic_to_ascii’:
helper.c:103:30: warning: passing argument 2 to restrict-qualified
parameter aliases with argument 4 [-Wrestrict]
iconv(l_iconv_ebcdic_ascii, &inout, &len, &inout, &len);
^~~~~~ ~~~~~~
helper.c:103:38: warning: passing argument 3 to restrict-qualified
parameter aliases with argument 5 [-Wrestrict]
iconv(l_iconv_ebcdic_ascii, &inout, &len, &inout, &len);
^~~~ ~~~~
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Commit 851f685993 ("Makefile: Add dependency between libvmcp and
libutil to fix -j builds") introduced the following regression
$ make clean
CLEAN /home2/holzheu/src/s390-tools
...
CLEAN libccw
CC libutil/util_base.o
CC libutil/util_path.o
For the "clean" target the new library dependency triggers a build
of libutil.
So remove the dependency again.
To fix the parallel build issue, no longer build the examples with
"make all" and add a new target "examples" that can now be used for building
the example programs.
Fixes: 851f685993 ("Makefile: Add dependency between libvmcp and libutil to fix -j builds")
Signed-off-by: Michael Holzheu <holzheu@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Most bootloaders use the BootLoaderSpec "title" field to name the entries
in their boot menu. The zipl bootloader used the "version" field instead,
since it was wrongly assumed that the zipl boot menu didn't support names
that contained spaces, which are usually present in a BLS "title" field.
But this is not the case, names with space characters are supported by the
IPL and is just a constraint of the section heading in the zipl.conf file.
So to be consistent with all the other bootloaders, use the "title" field
also on zipl when populating the boot menu entries from BLS files.
Closes: https://github.com/ibm-s390-tools/s390-tools/pull/47
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reviewed-by: Stefan Haberland sth@linux.ibm.com
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Use util_strlcpy() to copy log data correctly and get rid of the
following GCC8 compile warning:
zpcictl.c: In function ‘sclp_issue_action’:
zpcictl.c:312:3: warning: ‘strncpy’ specified bound 4054 equals
destination size [-Wstringop-truncation]
strncpy(report.data.log_data, sdata, sizeof(report.data.log_data));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Use util_strlcpy() to copy strings correctly and get rid of the
following GCC8 compile warning:
In function ‘hmcdrv_parse_line’,
inlined from ‘hmcdrv_cache_dir’ at hmcdrvfs.c:981:11:
hmcdrvfs.c:862:4: warning: ‘strncpy’ specified bound 192 equals
destination size [-Wstringop-truncation]
strncpy(symlink, arrow + 4, HMCDRV_FUSE_MAXPATH);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
By using util_strlcpy() and correctly copying strings we can get rid of
the following GCC8 compile warnings:
In function ‘path_to_ds_name.constprop’,
inlined from ‘zdsfs_readdir’ at zdsfs.c:282:2:
zdsfs.c:78:2: warning: ‘strncpy’ specified bound 45 equals destination
size [-Wstringop-truncation]
strncpy(normds, path, size);
^~~~~~~~~~~~~~~~~~~~~~~~~~~
In function ‘path_to_ds_name.constprop’,
inlined from ‘zdsfs_open’ at zdsfs.c:339:2:
zdsfs.c:78:2: warning: ‘strncpy’ specified bound 45 equals destination
size [-Wstringop-truncation]
strncpy(normds, path, size);
^~~~~~~~~~~~~~~~~~~~~~~~~~~
In function ‘path_to_member_name.constprop’,
inlined from ‘zdsfs_open’ at zdsfs.c:372:3:
zdsfs.c:94:3: warning: ‘strncpy’ specified bound 45 equals destination
size [-Wstringop-truncation]
strncpy(normds, path, size);
^~~~~~~~~~~~~~~~~~~~~~~~~~~
In function ‘path_to_ds_name.constprop’,
inlined from ‘zdsfs_getxattr’ at zdsfs.c:527:2:
zdsfs.c:78:2: warning: ‘strncpy’ specified bound 45 equals destination
size [-Wstringop-truncation]
strncpy(normds, path, size);
^~~~~~~~~~~~~~~~~~~~~~~~~~~
In function ‘path_to_member_name.constprop’,
inlined from ‘zdsfs_getxattr’ at zdsfs.c:547:4:
zdsfs.c:94:3: warning: ‘strncpy’ specified bound 45 equals destination
size [-Wstringop-truncation]
strncpy(normds, path, size);
^~~~~~~~~~~~~~~~~~~~~~~~~~~
In function ‘path_to_ds_name.constprop’,
inlined from ‘zdsfs_getattr.part.1’ at zdsfs.c:134:2,
inlined from ‘zdsfs_getattr’:
zdsfs.c:78:2: warning: ‘strncpy’ specified bound 45 equals destination
size [-Wstringop-truncation]
strncpy(normds, path, size);
^~~~~~~~~~~~~~~~~~~~~~~~~~~
In function ‘path_to_member_name.constprop’,
inlined from ‘zdsfs_getattr.part.1’ at zdsfs.c:164:3,
inlined from ‘zdsfs_getattr’:
zdsfs.c:94:3: warning: ‘strncpy’ specified bound 45 equals destination
size [-Wstringop-truncation]
strncpy(normds, path, size);
^~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Use the more robust util_strlcpy() to copy strings instead of strncpy().
This fixes the following GCC8 compile warnings:
qethqoat.c: In function ‘main’:
qethqoat.c:616:2: warning: ‘strncpy’ specified bound 16 equals
destination size [-Wstringop-truncation]
strncpy(ifr.ifr_name, opts.ifname, IFNAMSIZ);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Make sure strings are copied correctly by using util_strlcpy().
Also, rename the NIC_{OWNER,NAME}_LEN definitions to *_SIZE to make it
more clear that the terminating null byte ('\0') is included in this
buffer size. Using *_LEN would mean only the number of characters in the
string fit in.
Furthermore, use these definitions rather than sizeof().
This fixes the following GCC8 compile warning:
nic.c: In function ‘nic_data_get’:
nic.c:58:2: warning: ‘strncpy’ specified bound 9 equals destination size
[-Wstringop-truncation]
strncpy(data.owner, argv[11], sizeof(data.owner));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
nic.c:59:2: warning: ‘strncpy’ specified bound 9 equals destination size
[-Wstringop-truncation]
strncpy(data.name, argv[12], sizeof(data.name));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Change the buffer size to what we actually need and use util_strlcpy()
to correctly copy strings.
This gets rid of the following GCC8 compile warnings:
fcp.c: In function ‘fcp_wwpn_get’:
fcp.c:44:2: warning: ‘strncpy’ output may be truncated copying 20 bytes
from a string of length 4095 [-Wstringop-truncation]
strncpy(wwpn, buf, 20);
^~~~~~~~~~~~~~~~~~~~~~
fcp.c: In function ‘fcp_lun_get’:
fcp.c:65:2: warning: ‘strncpy’ output may be truncated copying 20 bytes
from a string of length 4095 [-Wstringop-truncation]
strncpy(lun, buf, 20);
^~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Use util_asprintf() to allocate memory for the string buffers
dynamically and get rid of the following GCC8 compile warnings:
system.c: In function ‘print_fw_str’:
system.c:86:46: warning: ‘%s’ directive output may be truncated writing
up to 4095 bytes into a region of size 4082 [-Wformat-truncation=]
snprintf(path, sizeof(path), "/sys/firmware/%s", file);
^~
system.c:98:19:
read_fw_str(str, path, sizeof(str));
~~~~
system.c:86:2: note: ‘snprintf’ output between 15 and 4110 bytes into a
destination of size 4096
snprintf(path, sizeof(path), "/sys/firmware/%s", file);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cmd_chreipl.c: In function ‘set_reipl_type_helper’:
cmd_chreipl.c:316:19: warning: ‘%d’ directive writing between 1 and 11
bytes into a region of size between 0 and 4095 [-Wformat-overflow=]
sprintf(cmd, "%s %d:%d", chreipl_helper, major(dev), minor(dev));
^~
cmd_chreipl.c:316:15: note: using the range [-2147483648, 2147483647]
for directive argument
sprintf(cmd, "%s %d:%d", chreipl_helper, major(dev), minor(dev));
^~~~~~~~~~
cmd_chreipl.c:316:15: note: using the range [-2147483648, 2147483647]
for directive argument
cmd_chreipl.c:316:2: note: ‘sprintf’ output between 5 and 4120 bytes
into a destination of size 4096
sprintf(cmd, "%s %d:%d", chreipl_helper, major(dev), minor(dev));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Use util_strlcpy() to copy strings correctly and get rid of the
following GCC8 compile warnings:
main.c: In function ‘main’:
main.c:34:2: warning: ‘strncpy’ specified bound 256 equals destination
size [-Wstringop-truncation]
strncpy(g.prog_name, argv[0], sizeof(g.prog_name));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In function ‘set_bootprog’,
inlined from ‘parse_chreipl_options’ at cmd_chreipl.c:510:4:
cmd_chreipl.c:185:2: warning: ‘strncpy’ specified bound 11 equals
destination size [-Wstringop-truncation]
strncpy(l.bootprog, bootprog, sizeof(l.bootprog));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cmd_chreipl.c: In function ‘set_reipl_type’:
cmd_chreipl.c:297:2: warning: ‘strncpy’ specified bound 15 equals
destination size [-Wstringop-tr uncation]
strncpy(l.dev, dev_name, sizeof(l.dev));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Copy strings correctly by using util_strlcpy() over strncpy() and get
rid of the following GCC8 compile warning:
In function ‘dinfo_extract_dev’,
inlined from ‘dinfo_get_dev_from_blockdev’ at dasdinfo.c:365:6:
dasdinfo.c:337:2: warning: ‘strncpy’ specified bound 80 equals
destination size [-Wstringop-trunc ation]
strncpy(tmp, str, RD_BUFFER_SIZE);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
IFNAMSIZ is the maximum buffer size for an interface name, including its
terminating zero byte. [1] strncpy() should therefore only copy a size
of 'IFNAMSIZ - 1' and the destination string should then be
null-terminated properly.
Use util_strlcpy() to correctly copy the string and get rid of the
followin GCC8 compile warning:
In function ‘ethtool_checksumming’,
inlined from ‘process_sysfs_attribute’ at lsqeth.c:333:5,
inlined from ‘print_device’ at lsqeth.c:468:3:
lsqeth.c:171:2: warning: ‘strncpy’ specified bound 16 equals destination
size [-Wstringop-truncat ion]
strncpy(ifr.ifr_name, if_name, IFNAMSIZ);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[1]: https://www.gnu.org/software/libc/manual/html_node/Interface-Naming.html
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Get rid of fixed buffers and avoid the following GCC8 compile warnings:
lszcrypt.c: In function ‘main’:
lszcrypt.c:642:28: warning: ‘%04x’ directive writing between 4 and 8
bytes into a region of size between 7 and 13 [-Wformat-overflow=]
sprintf(sub_dev, "%02x.%04x", id, dom);
^~~~
lszcrypt.c:642:22: note: directive argument in the range [0, 2147483647]
sprintf(sub_dev, "%02x.%04x", id, dom);
^~~~~~~~~~~
lszcrypt.c:642:5: note: ‘sprintf’ output between 8 and 18 bytes into a
destination of size 16
sprintf(sub_dev, "%02x.%04x", id, dom);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
DEV_NAME_SIZE is defined as IFNAMSIZ. IFNAMSIZ is the maximum buffer size
for an interface name, including its terminating null byte. [1] The
buffers dev_name and ifr_name are both defined with a size of
DEV_NAME_SIZE and IFNAMSIZ respectively.
Given these facts, only a size of 'IFNAMSIZ - 1' should be copied and
the destination string should then be null-terminated properly.
Use util_strlcpy() to correctly copy the strings and rid of the followin
GCC8 compile warnings:
xcec-bridge.c: In function ‘open_incoming_socket’:
xcec-bridge.c:94:2: warning: ‘strncpy’ specified bound 16 equals
destination size [-Wstringop-tru ncation]
..strncpy(if_req.ifr_name,dev_name,DEV_NAME_LEN);
..^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
xcec-bridge.c: In function ‘read_sys’:
xcec-bridge.c:284:4: warning: ‘strncpy’ output may be truncated copying
16 bytes from a string of length 255 [-Wstringop-truncation]
....strncpy(is->dev_name, if_name, DEV_NAME_LEN);
....^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[1]: https://www.gnu.org/software/libc/manual/html_node/Interface-Naming.html
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The term 'len' only represents the number of characters in a string,
as opposed to 'size' which means the number of bytes including the
terminating null byte ('\0').
DEV_NAME_LEN is defined as IFNAMSIZ, so we are clearly interested in the
size. Rename to DEV_NAME_SIZE to make this more clear.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The strlcpy() implementation in libu2s is beneficial for other tools as
well. Move the implementation to libutils and replace misc_strlcpy() in
libu2s accordingly.
Change the link order in zipl to make it build again.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Safely replace strncpy() with memcpy() as we don't want the terminating
null byte anyway. Get rid of the following warning:
dasdview.c: In function ‘dasdview_print_volser’:
dasdview.c:621:3: warning: ‘strncpy’ output truncated before terminating
nul copying 6 bytes from a string of the same length
[-Wstringop-truncation]
strncpy(volser, " ", 6);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
While assembling the volume label, strncpy() is used. As we don't care
about NUL termination of the strings here, safely replace strncpy() with
memcpy() and get rid of the following compile warnings:
fdasd.c: In function ‘fdasd_write_vtoc_labels’:
fdasd.c:1324:4: warning: ‘strncpy’ output truncated before terminating
nul copying 44 bytes from a string of the same length
[-Wstringop-truncation]
strncpy(ch, "LINUX.V "
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
" ", 44);
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
fdasd.c:1332:4: warning: ‘strncpy’ output truncated before terminating
nul copying 5 bytes from a string of the same length
[-Wstringop-truncation]
strncpy(c1, ".PART", 5);
^~~~~~~~~~~~~~~~~~~~~~~
In function ‘fdasd_write_vtoc_labels’,
inlined from ‘fdasd_write_labels’ at fdasd.c:1399:3:
fdasd.c:1329:4: warning: ‘strncpy’ output may be truncated copying 6
bytes from a string of length 6 [-Wstringop-truncation]
strncpy(c1, volser, VOLSER_LENGTH);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
fdasd.c:1336:4: warning: ‘strncpy’ output may be truncated copying 5
bytes from a string of length 5 [-Wstringop-truncation]
strncpy(c1, dsno, 5);
^~~~~~~~~~~~~~~~~~~~
fdasd.c:1340:4: warning: ‘strncpy’ output truncated before terminating
nul copying as many bytes from a string as its length
[-Wstringop-truncation]
strncpy(c1, dsname, strlen(dsname)); /* We don't want \0 */
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
fdasd.c:1313:4: warning: ‘strncpy’ output may be truncated copying 31
bytes from a string of length 44 [-Wstringop-truncation]
strncpy(c1, s2, 31);
^~~~~~~~~~~~~~~~~~~
In function ‘fdasd_change_part_type’,
inlined from ‘main’ at fdasd.c:3000:4:
fdasd.c:1639:3: warning: ‘strncpy’ output may be truncated copying 6
bytes from a string of length 19 [-Wstringop-truncation]
strncpy(ch, str, 6);
^~~~~~~~~~~~~~~~~~~
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
We can safely replace strncpy() with memcpy() here and get rid of the
following compile warnings:
dfi_s390mv.c: In function ‘set_magic_numbers’:
dfi_s390mv.c:570:3: warning: ‘strncpy’ output truncated before
terminating nul copying 7 bytes fr om a string of the same length
[-Wstringop-truncation]
strncpy(l.dumper_magic, DF_S390_DUMPER_MAGIC_MV_EXT, 7);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
dfi_s390mv.c:573:3: warning: ‘strncpy’ output truncated before
terminating nul copying 7 bytes fr om a string of the same length
[-Wstringop-truncation]
strncpy(l.dumper_magic, DF_S390_DUMPER_MAGIC_MV, 7);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Using inappropriate sizes for snprintf() leads to the following compile
warnings:
dfi_s390mv.c: In function ‘dev_from_busid’:
dfi_s390mv.c:116:34: warning: ‘/online’ directive output may be
truncated writing 7 bytes into a region of size between 1 and 4096
[-Wformat-truncation=]
snprintf(tmp_file, PATH_MAX, "%s/online", dev_file);
^~~~~~~
dfi_s390mv.c:116:2: note: ‘snprintf’ output between 8 and 4103 bytes
into a destination of size 4096
snprintf(tmp_file, PATH_MAX, "%s/online", dev_file);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
dfi_s390mv.c:143:35: warning: ‘%s’ directive output may be truncated
writing up to 255 bytes into a region of size between 0 and 4095
[-Wformat-truncation=]
snprintf(tmp_file, PATH_MAX, "%s/%s/dev", dev_file, direntp->d_name);
^~
dfi_s390mv.c:143:2: note: ‘snprintf’ output between 6 and 4356 bytes
into a destination of size 4096
snprintf(tmp_file, PATH_MAX, "%s/%s/dev", dev_file, direntp->d_name);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
A simple fix would be to use different suitable fixed sizes for tmp_file
and dev_file. However, the code can be improved here a little.
Use the libutil function util_path_sysfs() to build the sysfs path
string. This is more robust, as the function will figure out the correct
mount point of the sysfs. util_path_sysfs() will also terminate
execution, if no sysfs mount point could be found. That means, we can
get rid of check_sysfs().
Furthermore, the two variables (tmp_file, dev_file) can be combined to
one. Also, check the return value of open() and act accordingly.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Use misc_asprintf() for concatenating strings and get rid of the
following GCC8 compile warnings:
disk.c: In function ‘disk_get_info’:
disk.c:247:43: warning: ‘%d’ directive output may be truncated writing
between 1 and 11 bytes int o a region of size between 0 and 79
[-Wformat-truncation=]
snprintf(ppn_cmd, sizeof(ppn_cmd), "%s %d:%d",
^~
disk.c:247:39: note: using the range [-2147483648, 2147483647] for
directive argument
snprintf(ppn_cmd, sizeof(ppn_cmd), "%s %d:%d",
^~~~~~~~~~
disk.c:247:39: note: using the range [-2147483648, 2147483647] for
directive argument
disk.c:247:4: note: ‘snprintf’ output between 5 and 104 bytes into a
destination of size 80
snprintf(ppn_cmd, sizeof(ppn_cmd), "%s %d:%d",
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
script_file, major(stats.st_rdev),
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
minor(stats.st_rdev));
~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Using the DATA_SIZE() macro gets rid of the following GCC8 compile
warning:
boot.c: In function ‘boot_init_fba_stage0’:
boot.c:120:2: warning: ‘memcpy’ forming offset [2, 152] is out of the
bounds [0, 1] of object ‘_binary_fba0_bin_start’ with type ‘char’
[-Warray-bounds]
memcpy(stage0, DATA_ADDR(fba0), sizeof(*stage0));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from boot.c:18:
../boot/data.h:24:13: note: ‘_binary_fba0_bin_start’ declared here
extern char _binary_fba0_bin_start;
^~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
With GCC8 the following warning is displayed:
In file included from cio.h:15,
from stage2.h:15,
from menu.h:15,
from stage2.c:14:
s390.h:193:1: warning: alignment 1 of ‘struct _lowcore’ is less than 8
[-Wpacked-not-aligned]
} __packed;
^
Fix by aligning struct _lowcore to double page size.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The message buffer of DumpException doesn't account for additional
strings such as strerror(), device nodes, or filenames. Make it a bit
larger to be safe.
This fixes the following GCC8 compile warnings:
In file included from vm_dump.h:62,
from vm_dump.cpp:17:
dump.h: In static member function ‘static Dump::DumpType
VMDump::getDumpType(const char*)’:
dump.h:46:16: warning: ‘ (’ directive writing 2 bytes into a region of size
between 1 and 200 [-W format-overflow=]
sprintf(msg, "%s (%s)", m, strerror(errno));
^~~~~~~~~
dump.h:46:10: note: ‘sprintf’ output 4 or more bytes (assuming 203) into a
destination of size 200
sprintf(msg, "%s (%s)", m, strerror(errno));
~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
dump.h:46:16: warning: ‘ (’ directive writing 2 bytes into a region of size
between 1 and 200 [-W format-overflow=]
sprintf(msg, "%s (%s)", m, strerror(errno));
^~~~~~~~~
dump.h:46:10: note: ‘sprintf’ output 4 or more bytes (assuming 203) into a
destination of size 200
sprintf(msg, "%s (%s)", m, strerror(errno));
~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
dump.h:46:16: warning: ‘ (’ directive writing 2 bytes into a region of size
between 1 and 200 [-W format-overflow=]
sprintf(msg, "%s (%s)", m, strerror(errno));
^~~~~~~~~
dump.h:46:10: note: ‘sprintf’ output 4 or more bytes (assuming 203) into a
destination of size 200
sprintf(msg, "%s (%s)", m, strerror(errno));
~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
To assemble things like the volume id or fields of the format1 label
struct, strncpy() is used. Data copied here is later written to disk and
we don't want any terminating null byte ('\0') there. Therefore, we can
simply use memcpy() instead and get rid of the following GCC8 compile
warnings:
vtoc.c: In function ‘vtoc_init_format_1_8_label’:
vtoc.c:747:2: warning: ‘strncpy’ output truncated before terminating nul
copying 6 bytes from a s tring of the same length [-Wstringop-truncation]
strncpy((char *) f1->DS1DSSN, " ", 6);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
vtoc.c:746:2: warning: ‘strncpy’ output may be truncated copying 44 bytes from
a string of length 79 [-Wstringop-truncation]
strncpy(f1->DS1DSNAM, str, 44);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
vtoc.c:761:2: warning: ‘strncpy’ output may be truncated copying 13 bytes from
a string of length 79 [-Wstringop-truncation]
strncpy((char *)f1->DS1SYSCD, str, 13);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
vtoc.c: In function ‘vtoc_volume_label_set_volser’:
vtoc.c:401:2: warning: ‘strncpy’ output may be truncated copying 6 bytes from a
string of length 6 [-Wstringop-truncation]
strncpy(vlabel->volid, s, VOLSER_LENGTH);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
fread()/fwrite() return the unsigned count of elements read/written or a
short count or zero in case of an error. Check if the number of elements
read/written matches the expectation. In case of fread(), if it does not
match, check if an error occurred and otherwise assume the file to be too
small. In case of fwrite(), if it does not match, assume an error.
Resolves Cppcheck style warnings:
[zkey/pkey.c:161]: (style) Checking if unsigned variable 'count' is less than zero.
[zkey/pkey.c:209]: (style) Checking if unsigned variable 'count' is less than zero.
[zkey/pkey.c:299]: (style) Checking if unsigned variable 'count' is less than zero.
Cc: Ingo Franzki <ifranzki@de.ibm.com>
Signed-off-by: Jens Remus <jremus@linux.ibm.com>
Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
When realloc() fails to allocate memory it returns NULL and the original
block is left untouched. In that case return the potentially larger
original block.
Found using Cppcheck:
[zdev/src/misc.c:1106]: (error) Memory leak: name
Cc: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: Jens Remus <jremus@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The modified flag was actually never copied during merge of setting lists.
Copy the modified flag if requested.
Found using Cppcheck:
[zdev/src/setting.c:553]: (warning) Redundant assignment of 'n->modified' to itself.
Cc: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: Jens Remus <jremus@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The computation of blk in functions fdasd_check_volume() and
fdasd_write_vtoc_labels() contained the possibility for an undetected
unsigned integer overflow. Unconditionally subtracting one from the
return value of function cchhb2blk() may cause an unsigned integer
overflow, as cchhb2blk() may return zero if cc, hh, and b are all zero.
Resolves Cppcheck style warning:
[fdasd/fdasd.c:1260]: (style) Checking if unsigned variable 'blk' is less than zero.
Cc: Stefan Haberland <sth@linux.ibm.com>
Cc: Jan Hoeppner <hoeppner@linux.ibm.com>
Signed-off-by: Jens Remus <jremus@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Only check if size is zero and not if equal or less than zero. This is
safe, as size is only decremented by rlen, which is either less than or
equal to size. So size may never overflow.
Resolves Cppcheck style warning:
[cmsfs-fuse/cmsfs-fuse.c:3746]: (style) Checking if unsigned variable 'size' is less than zero.
Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Jens Remus <jremus@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
For linking the "libvmcp" example program the "libutil" is required.
Therefore when the "libvmcp" directory is entered in a parallel build
and the "libutil.a" file has not yet been created, a second "libutil"
build is triggered which can then lead to build errors like the following:
ar: libutil.a: File format not recognized
ar: libutil.a: No such file or directory
make[2]: Leaving directory '/builddir/build/BUILD/s390-tools-2.6.0/libutil'
make[2]: *** [../common.mak:246: libutil.a] Error 1
make[1]: *** [../common.mak:246: libutil.a] Error 1
make[1]: *** Waiting for unfinished jobs....
make[1]: *** [../common.mak:315: ..//libutil/libutil.a] Error 2
make[1]: Leaving directory '/builddir/build/BUILD/s390-tools-2.6.0/libvmcp'
make: *** [Makefile:57: libvmcp] Error 2
make: *** Waiting for unfinished jobs....
ving directory '/builddir/build/BUILD/s390-tools-2.6.0/libutil'
make: *** [Makefile:57: libutil] Error 2
error: Bad exit status from /var/tmp/rpm-tmp.wCulxB (%build)
So fix this and add a dependency between libvmcp and libutil.
Signed-off-by: Michael Holzheu <holzheu@linux.ibm.com>
Reviewed-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
When using 'zkey cryptsetup' with the '--run' option,
it might not find the executable to execute when those
are in /sbin.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Change all error messages from printf() to warnx().
While at it, remove the punctuation mark for some of the error messages.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The .o.d make targets in common.mak do not expect that
header files are generated by a make target. When a new header
file is generated, the .o.d targets will be rebuilt on the
next make invocation, because that new header file is then
detected, and is then treated as a new dependency of all .o.d
targets.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The linux.vnet.ibm.com addresses will be become disfunct by eoy.
Signed-off-by: Stefan Raspl <raspl@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add the missing identifiers to report the card name and link speed.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Print a meaningful reason when the keystore can not be
accessed, e.g. because the user is not allowed to access
the keystore directory.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Dump compression was a feature of the file system dumper which was removed
several years ago. This include is a leftover. Remove it.
Signed-off-by: Philipp Rudo <prudo@linux.ibm.com>
Acked-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Remove unused code because query_OSA_EXP does actually never return -1.
So make its return value unsigned and remove all checks for negative
return values.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Osasnmpd would start without any devices, but refuses to start when all
devices are no real OSA devices.
Start osasnmpd in this case because it re-scans via update_mib_info
whenever the interface data changes.
Reviewed-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The util_scandir_* functions may return 0 or -1, in which case no vector
is allocated in libutil/util_scandir.c. util_ptr_vec_free, called by
util_scandir_free or directly from lschp.c and lsscm.c, does always
call free for the vector which might be not initialized.
Fix this by always initializing the vector with NULL in __scandir and
add some api hardening by checking the vector and count in
util_ptr_vec_free before iterating over the vector.
And update the comment for util_scandir to indicate that -1 may be
returned in error cases plus that the vector is initialized with NULL.
Fixes: https://github.com/ibm-s390-tools/s390-tools/issues/43
Reported-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Unfortunately zdev hook already exists in Ubuntu, from an unrelated
project. ZFS uses zdev/zpool names, and ships a zdev hook to do ZFS
specific initialisation. It is available on s390x and thus results in
file-conflict upon installing both. Thus renaming this zdev hook to
s390-tools-zdev.
Closes: https://github.com/ibm-s390-tools/s390-tools/pull/41
Signed-off-by: Dimitri John Ledkov <xnox@ubuntu.com>
Acked-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
At the moment, if we specify the slot address of an NVMe device but
can't find the corresponding device node, the execution is terminated.
This is a bit harsh as the device node is rather optional and only
necessary to collect S.M.A.R.T. data. We should still be able to issue
the error reporting, even if we couldn't determine the device node.
Therefore, make sure the device node for NVMe devices is optional by
changing various error messages to warnings.
Change sysfs_get_slot_addr() to have a return value and work with that
accordingly.
Also make sure, that execution is terminated when a valid device node
was specified but no matching slot address was determined. The slot
address is necessary to issue the error reporting commands.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The address sysfs attribute might not be present on some older kernel
levels. Read the device link instead using readlink() to obtain the
address.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Be consistent with the rest of the code and use fopen() rather than
open().
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This patch fixes false positives when attributes are checked for
conflicts between BridgePort and VNICC.
Signed-off-by: Hans Wippel <hwippel@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The minor()/major() function definitions are moved to sys/sysmacros.h
and will be removed from sys/types.h. To correct below warning, simply
include sys/sysmacros.h.
zpcictl.c: In function ‘sysfs_get_slot_addr’:
zpcictl.c:184:13: warning: In the GNU C Library, "major" is defined
by <sys/sysmacros.h>. For historical compatibility, it is
currently defined by <sys/types.h> as well, but we plan to
remove this soon. To use "major", include <sys/sysmacros.h>
directly. If you did not intend to use a system-defined macro
"major", you should undefine it after including <sys/types.h>.
major = major(dev_stat.st_rdev);
^~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
zpcictl is used to manage PCI devices on z Systems. In this first
version it is mainly used to handle erroneous PCI devices by changing
their state and make those changes known to the SE. Log data, such as
S.M.A.R.T. data for NVMe devices, is sent alongside those state changes.
The state change is issued by sending data via the PCI 'report_error'
sysfs attribute. It's a binary attribute which will cause the host to
send an Adapter Notification Event.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
With the latest kernel comes an extension for the zcrypt
device driver to support multiple zcrypt device nodes.
Here is the userspace part of this which adds a new
application zcryptctl for user friendly management of
this feature.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
zipl currently uses the FIBMAP ioctl to map blocks for the bootloader;
on XFS, if FIBMAP is requested on a reflinked file, it will fail -
and FIBMAP returns 0 in this case, which is indistinguishable from a
hole. This causes boot to fail because the file is not mapped.
We can use the FIEMAP ioctl instead, which is able to map reflinked
files. While FIEMAP is able to map entire extents at once, here we
simply use it to obtain the mapping block-by-block so that it fits
in with the current FIBMAP calls.
Fixes: https://github.com/ibm-s390-tools/s390-tools/issues/34
Closes: https://github.com/ibm-s390-tools/s390-tools/pull/36
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Tested-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
With kernel 4.19 there comes an extension to the existing
AP bus which supports alternate zcrypt drivers. For details
about this see kernel patch "s390/zcrypt: AP bus support for
alternate driver(s)". So now lszcrypt displays the driver
name in verbose mode. As some of the information displayed
by lszcrypt was based on sysfs attributes, which are only
available when the default zcrypt driver is bound to the
device, this also needed some rework. If a sysfs attribute
is not available because of an alternate driver binding
(or no driver) a question mark is printed into the field.
Together with this a slight rework of the displayed information
has been done. The two columns for pending requests and pending
replies has been merged to one pending column and the column
sizes have been adjusted.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
zdsfs writes output for --help and --version to stderr. This is
likely because zdsfs calls into a FUSE function for additional
usage output that also writes to stderr (prior to FUSE 3.0.0).
To be consistent with other s390-tools and GNU coding guide lines,
fix this by using stdout for zdsfs generated output, and by
redirecting stderr to stdout before calling the FUSE function.
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
tape390_display writes output for --help to stderr. To be consistent
with other s390-tools and GNU coding guide lines, fix this by using
stdout for tool-generated usage help.
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add missing long options for --help and --version in util_prg_example.
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Both iucvconn and iucvtty write output for --help to stderr. To be
consistent with other s390-tools and GNU coding guide lines,
fix this by using stdout for tool-generated usage help.
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
hmcdrvfs writes output for --help and --version to stderr. This is
likely because hmcdrvfs calls into a FUSE function for additional
usage output that also writes to stderr (prior to FUSE 3.0.0).
To be consistent with other s390-tools and GNU coding guide lines,
fix this by using stdout for hmcdrvfs generated output, and by
redirecting stderr to stdout before calling the FUSE function.
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
cmsfs-fuse writes output for --help and --version to stderr. This is
likely because cmsfs-fuse calls into a FUSE function for additional
usage output that also writes to stderr (prior to FUSE 3.0.0).
To be consistent with other s390-tools and GNU coding guide lines,
fix this by using stdout for cmsfs-fuse generated output, and by
redirecting stderr to stdout before calling the FUSE function.
Also remove an inactive call to add FUSE version output on --version to
be consistent with other FUSE-based s390-tools.
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Building zipl from outside the zipl/ sub-directory fails due to a
missing dependency:
# cd s390-tools
# make -C zipl/src/ zipl
boot.c:18:10: fatal error: ../boot/data.h: No such file or directory
#include "../boot/data.h"
This is because boot/data.h needs to be generated before src/boot.c can
be compiled. Fix this by adding the missing dependency to the zipl
Makefile.
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Assume "N/A" for non-zfcp SCSI devices, such as iSCSI or virtio-scsi-ccw,
to not erroneously access absent zfcp-specific sysfs attributes.
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Simply skip non-zfcp SCSI devices, such as iSCSI or virtio-scsi-ccw,
to not erroneously access absent zfcp-specific sysfs attributes.
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The default bash setting have nullglob disabled so if
$SCSI_DEV/scsi_generic*
aka
/sys/bus/scsi/devices/*:*:*:*/scsi_generic*
does not match anything, it leaves the glob pattern unmodified and
SG_DEV=$(basename $SG_DEV/*)
results in the literal:
*
If $SG_INQ exists, it invoked sg_inq with more than the one allowed
positional argument for a SCSI generic device node:
sg_inq /dev/*
Causing error messages and the usage of sg_inq to land in $TAPE_SERIAL.
To not have to rely on the nullglob setting, explicitly check for the
existence of $SCSI_DEV/scsi_generic before evaluating
SG_DEV=$(basename $SG_DEV/*).
Also handle availability of sg_inq but absence of scsi_generic
individually to provide the user with a hint if only sg is missing.
Suggested-by: Eric Farman <farman@linux.vnet.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Cc: Eric Farman <farman@linux.vnet.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This should be more stable than parsing the IBM lin_tape proc-fs output.
If sysfs is not available or provides no match, fall back to proc-fs.
An alternative to "ls -1d ... | head -n1" would have been to use
"shopt -s extglob; ls -d $SCSI_DEV/lin_tape/$DEV_NAME+([0-9])"
but I did not want to have to rely on extglob potentially influencing
other old code of lstape.
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
https://www.ibm.com/developerworks/linux/linux390/s390-tools-1.8.0.html
before the first upstream commit b627b8d8e1 ("Initial s390-tools-2.0.0
import") introduced SCSI tape/changer output for lstape. It used the SCSI
device serial number as lookup key to find a match in IBM lin_tape device
driver proc-fs output for a given SCSI device name. Since multiple paths
to the same tape/changer have the same serial number, multiple matches can
occur and distort the output:
% lstape
...
SCSI tape devices (found 12):
...
Generic Device Target Vendor Model Type State
sg0 IBMtape0 3 0:0:0:0 IBM ULT3580-TD6 tapedrv
running
sg1 IBMchanger0 1 2 3 0:0:0:1 IBM
3573-TL changer running
...
There are unexpected additional Device suffix numbers for each additional
path of the same tape/changer (independent of actual path failover
enablement in lin_tape). The multiple matches above cause excess arguments
to printf. Explaining the resulting output, the bash man page says:
"The format is reused as necessary to consume all of the arguments."
This also causes a wrong number of found devices.
Current lin_tape (v3.0.31) uses the printf format string
"%-8d%-12s%-25s%-16s%-16s%-10s" for fixed column proc-fs output.
This causes the following example input to lstape:
==> /proc/scsi/IBMchanger <==
lin_tape version: 3.0.31
lin_tape major number: 251
Attached Changer Devices:
Number model SN HBA SCSI FO Path
0 3573-TL 00L4U78W6497_LL0 Virtio SCSI HBA 0:0:0:1 Primary
1 3573-TL 00L4U78W6497_LL0 Virtio SCSI HBA 0:0:1:1 Alternate
2 3573-TL 00L4U78W6497_LL0 Virtio SCSI HBA 1:0:1:1 Alternate
3 3573-TL 00L4U78W6497_LL0 Virtio SCSI HBA 1:0:0:1 Alternate
==> /proc/scsi/IBMtape <==
lin_tape version: 3.0.31
lin_tape major number: 251
Attached Tape Devices:
Number model SN HBA SCSI FO Path
0 ULT3580-TD6 10WT037733 Virtio SCSI HBA 0:0:0:0 Primary
1 ULT3580-TD6 10WT037701 Virtio SCSI HBA 0:0:1:0 Primary
2 ULT3580-TD6 10WT037701 Virtio SCSI HBA 1:0:1:0 Alternate
3 ULT3580-TD6 10WT037733 Virtio SCSI HBA 1:0:0:0 Alternate
If that was reliable and stable, we could use fixed column parsing:
IBM_IDX=$(
awk 'BEGIN {
FIELDWIDTHS="8 12 25 16 16 10"
}
gensub(" ","","g",$5) == "'$SCSI_ID'"{
print gensub(" ","","g",$1)
}' /proc/scsi/$DEV_NAME
)
However, we can hardly guarantee a field value always fits into the left-
adjusted columns (printf won't cap to field width!). Also, the fixed column
format changed between lin_tape v3.0.20 and v3.0.18 from
"%-8d%-12s%-18s%-16s%-16s%-10s" with less width for the 'SN' field.
The column format also changed between v2.2.0 and v1.37.0 from
"%-8d%-12s%-18s%-32s%-10s" where the 'SCSI' field did not even exist.
Likely that was the reason for the original Serial lookup in lstape.
As can be seen in the example, at least the HBA device driver string can
contain whitespace and breaks the field numbers with tokenized parsing.
We want to match column 5 (SCSI) but above we would match against the
string 'SCSI' as part of "Virtio SCSI HBA" instead of e.g. '0:0:0:0'.
The following works currently knowing that the last two columns do not
contain white space. But it can also fail if the value of field
'HBA' does not fit into the left-adjusted columns so there is no white
space between columns 'HBA' and 'SCSI' making them collapse:
awk '$(NF-1) == "'$SCSI_ID'" { print $1 }' /proc/scsi/$DEV_NAME
Grep for the SCSI device name as word (to skip names with same substring,
such as 0:0:1:1 also matching 0:0:1:10) and cut the first field 'Number'.
If there is no SCSI column at all (and no SCSI LLDD or other column with a
name accidentally matching an existing SCSI device name), we get no match
and better bail out with the initialized "N/A" for the lstape column
"Device". If the SCSI column exists, the SCSI device names are unique and
we always get at most one match.
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
When zfcpdump is built you get a compile warning
zfcpdump.c: In function ‘init_sig’:
zfcpdump.c:307:24: warning: cast between incompatible function types from ‘void (* (*)(int, siginfo_t *, void *))(int)’ {aka ‘void (* (*)(int, struct <anonymous> *, void *))(int)’} to ‘void (*)(int)’ [-Wcast-function-type]
g.sigact.sa_handler = (__sighandler_t)dump_sig_handler;
Furthermore the man pages for sigaction says
$man 2 sigaction
[...]
If SA_SIGINFO is specified in sa_flags, then sa_sigaction (instead
of sa_handler) specifies the signal-handling function for signum.
This function receives three arguments, as described below.
[...]
Because SA_SIGINFO is set, using sa_handler at all is wrong in this case.
Fix this by giving dump_sig_handler the correct return type and assign it
to sa_sigaction.
Signed-off-by: Philipp Rudo <prudo@linux.ibm.com>
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The zfcpdump kernel is built without module support. Furthermore the initrd
doesn't contain modprobe. So trying to load modules using modprobe in
zfcpdump userspace doesn't really make sense.
Signed-off-by: Philipp Rudo <prudo@linux.ibm.com>
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Since version 198 (Feb 2013) systemd contains kernel-install, a script
managing kernel installs. This script allows execution of drop-in scripts
for customization. Add such a drop-in script to s390-tools to handle the
installation of zfcpdump kernels.
It's main purpose is to manage a link to the latest installed zfcpudump
kernel at ZFCPDUMP_IMAGE, where zipl expects to find the image to install
for a SCSI dumper.
The script supports two installation modes. One recommended by the
BootLoaderSpecs [1] to /boot/<machine-id>/<kernel-version> directories and
one directly to /boot. In the second case files are renamed during
installation to <original-name>-<kernel-version> to guarantee unique names.
Because the zfcpdump kernel is so special make the script stand-alone and
prevent any other script from being executed (exit 77) when a zfcpdump is
installed. Especially avoid functionality like creating an initrd (already
provided by s390-tools) or creating a boot entry (the zfcpdump kernel
should not be used for any other purpose than dumping).
The script requires systemd >= 203.
[1] https://www.freedesktop.org/wiki/Specifications/BootLoaderSpec/
Signed-off-by: Philipp Rudo <prudo@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
In the zipl Makefile macros are defined with the sole purpose to define
other macros in zipl.h. Remove this unnecessary indirection.
Signed-off-by: Philipp Rudo <prudo@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The file system dumper no longer exists. So there is no need in keeping
'PART' to distinguish between the file system and the partition dumper.
Adjust the macro name to the usage in zipl by removing 'PART'.
While at it also adjust the file names the macros stand for.
Signed-off-by: Philipp Rudo <prudo@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The macro names are a mixture of the original file system dumper (FSDUMP)
and its extension to cut the file system and write directly to a partition
(PART). The original dumper no longer exists and today the feature is
called zfcpdump. Prevent confusion by renaming the macros to fit todays
usage.
Signed-off-by: Philipp Rudo <prudo@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Allow to specify a volume-type for a key. This applies to all
associated volumes. The volume type can be either 'plain' or
'luks2'. New keys created will default to 'luks2', but existing
keys that do not have a volume-type property default to 'plain'
for compatibility reasons.
The volume type 'luks2' is only available when the define
HAVE_LUKS2_SUPPORT is set in the makefile. This is set only
when libcryptsetup version 2.0.3 or newer is available
at build time. If the define is not set, the volume-type
option is not available to the user, and the volume-type of
a key defaults to 'plain'.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Store a verification pattern in the properties file along
with the secure key. The verification pattern allows to identify
the inner key even when the secure key is no longer valid.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The zkey-cryptsetup tool is used to validate and re-encipher
secure AES volume keys of volumes encrypted with LUKS2 and
the paes cipher.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The IPAPPEND option in the pxelinux config file can be used
to pass information about the boot interface to the booted
Linux kernel.
The support for this option was missing and could lead to
installation failures, e.g. using kickstart.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Client architecture aware DHCP configurations may send a
bootfile for the wrong architecture, if the DHCP request
doesn't include the client architecture identifier 0x001f.
Further, the DHCP reply may include the pxepathprefix option,
which points to the base directory to use for TFT requests.
If the value is not honored by the client, the wrong
configuration file, kernel, etc. could be loaded.
Both issues are fixed by this commit.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Compressed kernel modules (filename *.ko.xz) would not be included
since the script was looking for files with .ko suffix only.
This can result in a pxelinux.0 image that can't access the
network, which is not good for a network boot loader...
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The output of /proc/<pid>/stat will show the process name in parentheses.
The parsing code in read_stat() tries to filter out the parentheses, which
will go wrong when the process name itself also contains parentheses, e.g.
in an output like this: "2421 ((sd-pam)) S 2420 2420 2420 ..."
In this case, the first closing parentheses will be taken as end marker,
and the sscanf() on the remaining string will silently fail, leaving its
values in uninitialized state and producing wrong data.
Fix this by using strrchr() instead of strchr() to find the last closing
parentheses. Also add return value checking for sscanf() and initialize the
values to 0.
Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
mk-pxelinux-ramfs, mod_fsstatd|procd.service, zfcpdump all use
/sbin/modprobe path. Adjust zdev to use that path as well. This works
universally on both usr-merge systems (e.g. Debian/Ubuntu with
usrmerge package installed), and split-usr systems alike
(Debian/Ubuntu current stable releases default).
Closes: #31
Link: https://bugs.launchpad.net/ubuntu/+source/s390-tools/+bug/1777600
Signed-off-by: Dimitri John Ledkov <xnox@ubuntu.com>
Acked-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
When a volume or APQN association is made while generating or
importing a key, and a duplicate association is detected, then
this may leave the key in an inconsistent state.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
When a zkey generate or change command is used to associate one
or multiple APQNs the command succeeds, but no key is generated
and no APQNs are associated, because the return code returned by
_keystore_apqn_check() is wrong.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The APQN check routine as well as the properties helper functions
do not free all memory that they allocated.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add a zipl-switch-to-blscfg script that can be used to switch the zipl
configuration in a system to use the BootLoaderSpec (BLS) config files
to define the IPL sections instead of having them defined in zipl.conf.
Closes: #28
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The BootLoaderSpec (BLS) defines a file format for boot configurations,
so bootloaders can parse these files and create their boot menu entries
by using the information provided by them [0].
This allow to configure the boot items as drop-in files in a directory
instead of having to parse and modify a bootloader configuration file.
If the /boot/loader/entries exists and there are BLS files there, then
these are parsed and configuration sections are added without the need
to have these in a zipl.conf file.
A different BLS directory can be specified from the command line using
the --blsdir option.
[0]: https://www.freedesktop.org/wiki/Specifications/BootLoaderSpec/
GitHub-ID: #28
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The function returns 0 on success and a negative number on error but is
useful to know how many tokens were allocated. This will be used by the
BLS parsing code to determine if needs to allocate mor tokens or not to
parse the BLS fragments.
GitHub-ID: #28
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
lsluns lists nothing and returns with return code 0 if no adapter (FCP
device) or target port exists in sysfs. This can be confusing for the user.
Print a message if no adapter exists. Print a message if no port exists on
any adapter.
Reported-by: Thorsten Diehl <thorsten.diehl@de.ibm.com>
Suggested-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Jens Remus <jremus@linux.ibm.com>
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Changing the cmb_enable attribute of a CCW device can cause a blocked
chzdev process or udev rule. This problem occurs when the device is
offline, cmb_enable is 0, and chzdev is used to set cmb_enable=1 and
online=1 at the same time.
The following call will block:
chzdev 190d -a cmb_enable=1 online=1
The following call will generate a udev rule that will block subsequent
calls to 'udevadm settle':
chzdev 190d -p online=1 cmb_enable=1
Fix this by ensuring that cmb_enable is only set when the CCW device
is not online.
Reported-by: André Wild <wild@linux.vnet.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Enable user to specify that a device should be configured early, that is
during the initial RAM-disk boot phase. This may be necessary, e.g. to
override auto-configuration for a device which is also applied during
that boot phase. It may also be used to manually specify devices that
are required to access the root file system, such as networking devices.
Users can mark devices as requiring early configuration by specifying
a value of 1 for the newly added internal attribute zdev:early:
# chzdev dasd-eckd 0.0.1234 -p zdev:early=1
This can be changed back by removing the attribute setting, or by
setting the attribute value to 0:
# chzdev dasd-eckd 0.0.1234 -p -r zdev:early
or
# chzdev dasd-eckd 0.0.1234 -p zdev:early=0
Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This change adds base infrastructure for implementing internal device
attributes. In the context of the zdev tools, an internal device
attribute is a new type of device attribute with the following
characteristics:
- Can be set and removed like normal device attributes
- Affects zdev-internal handling only
- Does not correspond to an actual device attribute, that is
it has no representation in SysFS
- Can not be set in the active configuration
- Name starts with "zdev:" to prevent conflicts with actual
device attributes
Values for internal device attributes are stored in udev rules alongside
the normal persistent configuration of a device. They are encoded as
udev environment variables. Note that they have no further effect on
udev processing.
Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add initramfs-tools scripts that apply firmware-provided I/O
configuration data as auto-configuration during boot. This way, all I/O
devices configured by DPM are automatically brought online without
further user interaction.
This mechanism is active by default. It can be deactivated by specifying
the following parameter on the kernel command line:
rd.zdev=no-auto
Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add a dracut hook that applies firmware-provided I/O configuration data
as auto-configuration during boot. This way, all I/O devices configured
by DPM are automatically brought online without further user
interaction.
This mechanism is active by default. It can be deactivated by specifying
the following parameter on the kernel command line:
rd.zdev=no-auto
Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Auto-configuration is the name of a new configuration target that is
supported by chzdev and lszdev besides the existing active and
persistent configuration targets. Directives created in this new
configuration are stored as udev rules in the /run/udev/rules.d
directory.
Auto-configuration directives are only in effect if there are no
directives for the same device in the user-provided persistent
configuration. This allows users to override auto-configuration
directives if necessary.
Due to the volatile nature of the /run directory, auto-configuration
directives are cleared on reboot. Therefore mechanisms that generate
auto-configuration directives must recreate them on every boot.
The lszdev tool displays auto-configuration data both in list view
as well as in detail view. Users can specify the new option --auto-conf
to only show data from this configuration target.
Mechanisms that generate automated configuration directives can use
chzdev together with the --auto-conf option to create the corresponding
udev rules.
Note: This change does not include a mechanism that generates
auto-configuration directives.
Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Change chzdev's udev rule generation from the previous approach of
combining all zfcp-lun udev rules associated with an FCP device into a
single file to storing zfcp-lun udev rules in one file per zfcp-lun.
This is done to enable per-device udev rule masking.
With udev rule masking, if a udev rule file by the same name exists in
both /etc and /run, the udev daemon will only consider the rules found
in /etc.
The auto-configuration feature will make use of per-device udev rule
masking to introduce a new class of configuration data (stored in /run)
that is only active if no user-provided configuration data (in /etc)
exists.
In addition, change chzdev to allow the regeneration of udev rules by
using the --force command line like in the following example:
# chzdev zfcp-lun --configured --enable --persistent --force
This can be used to convert all existing zfcp-lun udev rules from the
old format to the new one.
Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
There are some situations where running "udevadm settle" can result in
a deadlock, such as in the early stages of initial RAM-disk processing.
Introduce a new command-line option --no-settle that can be used to
suppress calling "udevadm settle" to allow chzdev to be run in such
situations.
Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add support for reading firmware-provided I/O configuration data files.
Such configuration files are generated by the Dynamic Partition Manager
and made available via a kernel interface for consumption by Linux.
To read a firmware configuration file, use the existing --import option:
# chzdev --import /sys/firmware/sclp_sd/config/data
This will apply all I/O configuration data found in the specified file
to the persistent configuration.
Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Apply some changes to existing functions and data structures to simplify
the firmware configuration file support implementation.
- Make qeth and dasd subtype objects non-static
- Change the existing helper functions for reading file contents into
memory to also support binary functions
- Move some configuration file import functions to make them available
for use in other source files
Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
log_alert "Changing the re-IPL device failed. The current re-IPL settings might be inconsistent. Check and correct the settings (see the README.md of chreipl-fcp-mpath) to make sure that the current re-IPL device is valid."
return 14
fi
firmware_unlock_exclusive
if [ "${sdev_busid}" != "${ipl_busid}" ] \
|| [ "${sdev_wwpn}" != "${ipl_wwpn}" ] \
|| [ "${sdev_lun}" != "${ipl_lun}" ]; then
log_note "Changed re-IPL path to: ${sdev_busid}:${sdev_wwpn}:${sdev_lun}."
fi
# Try to update the information in the ID file if we have gotten the
if '@DEBUG@'; then hexdump -vC "${ID_FILE}" 1>&2; fi
fi
return 0
}
declare -g SDEV=""
if [[ "${DM_UUID}" == mpath-* ]]; then
# Assume Multipath Device Mapper Device;
# e.g.: DEVPATH = /devices/virtual/block/dm-0
for sdev in /sys/"${DEVPATH}"/slaves/sd*/device; do
if sdev_test_path_state "${sdev}"; then
SDEV="${sdev}"
break
fi
done
# No path of the multipath-device that represents the IPL volume is
# online.
if [ "${SDEV}" = "" ]; then
log_crit "The re-IPL device cannot be changed because no operational path to the re-IPL volume remains. The next re-IPL might fail unless you re-attach or enable at least one valid path to the re-IPL volume."
\fBdasdfmt\fR formats a DASD (ECKD) disk drive to prepare it
for usage with Linux for S/390.
for usage with Linux for S/390.
The \fIdevice\fR is the node of the device (e.g. '/dev/dasda').
Any device node created by udev for kernel 2.6 can be used
Any device node created by udev for kernel 2.6 can be used
(e.g. '/dev/dasd/0.0.b100/disc').
.br
\fBWARNING\fR: Careless usage of \fBdasdfmt\fR can result in
\fBWARNING\fR: Careless usage of \fBdasdfmt\fR can result in
\fBLOSS OF DATA\fR.
.SHOPTIONS
.TP
\fB-h\fR or \fB--help\fR
\fB\-h\fR or \fB\-\-help\fR
Print usage and exit.
.TP
\fB-t\fR or \fB--test\fR
Disables any modification of the disk drive.
\fB\-t\fR or \fB\-\-test\fR
Disables any modification of the disk drive.
.br
\fBdasdfmt\fR just prints
out, what it \fBwould\fR do.
.TP
\fB-v\fR
\fB\-v\fR
Increases verbosity.
.TP
\fB-y\fR
\fB\-y\fR
Start formatting without further user-confirmation.
.TP
\fB--norecordzero\fR
\fB\-\-norecordzero\fR
Remove permission for subsystem to format write record zero.
.br
This is an expert option: Per default in recent dasd drivers, subsystems are
@@ -54,90 +54,101 @@ to remove this permission.
.br
.TP
\fB-L\fR or \fB--no_label\fR
\fB\-L\fR or \fB\-\-no_label\fR
Omit the writing of a disk label after formatting.
.br
This makes only sense for the 'ldl' disk layout.
.br
The '-L' option has to be specified after the '-d ldl' option.
The '\-L' option has to be specified after the '\-d ldl' option.
.br
e.g. dasdfmt -d ldl -L /dev/...
e.g. dasdfmt \-d ldl \-L /dev/...
.TP
\fB-V\fR or \fB--version\fR
\fB\-V\fR or \fB\-\-version\fR
Print version number and exit.
.TP
\fB-F\fR or \fB--force\fR
\fB\-F\fR or \fB\-\-force\fR
Formats the device without performing sanity checking.
.TP
\fB-C\fR or \fB--check_host_count\fR
\fB\-C\fR or \fB\-\-check_host_count\fR
Force dasdfmt to check the host access open count to ensure the device
is not online on another operating system instance
.TP
\fB-d\fR\fIlayout\fR or \fB--disk_layout\fR=\fIlayout\fR
\fB\-d\fR\fIlayout\fR or \fB\-\-disk_layout\fR=\fIlayout\fR
Formats the device with compatible disk layout or linux disk layout.
\fIlayout\fR is either \fIcdl\fR for the compatible disk layout
(default) or \fIldl\fR for the linux disk layout.
.br
Compatible disk layout means a special handling of the
first two tracks of the volume. This enables other S/390 or zSeries
Compatible disk layout means a special handling of the
first two tracks of the volume. This enables other S/390 or zSeries
operating systems to access this device (e.g. for backup purposes).
.TP
\fB-p\fR or \fB--progressbar\fR
Print a progress bar while formatting.
Print a progress bar while formatting.
Do not use this option if you are using a 3270 console,
running in background or redirecting the output to a file.
.TP
\fB-P\fR or \fB--percentage\fR
\fB\-P\fR or \fB\-\-percentage\fR
Print one line for each formatted cylinder showing the number of the
cylinder and percentage of formatting process.
Intended to be used by higher level interfaces.
.TP
\fB-m\fR\fIstep\fR or \fB--hashmarks\fR=\fIstep\fR
\fB\-m\fR\fIstep\fR or \fB\-\-hashmarks\fR=\fIstep\fR
Print a hashmark every \fIstep\fR cylinders. The value \fIstep\fR has to be within range [1,1000], otherwise it will be set to the default, which is 10.
.br
You can use this option to see the progress of formatting in case you
are not able to use the progress bar option -p, e.g. with a 3270
are not able to use the progress bar option \-p, e.g. with a 3270
terminal.
.br
The value will be at least as big as the -r or --requestsize value.
The value will be at least as big as the \-r or \-\-requestsize value.
.br
.TP
\fB-M\fR\fImode\fR or \fB--mode\fR=\fImode\fR
\fB\-M\fR\fImode\fR or \fB\-\-mode\fR=\fImode\fR
Specify the \fImode\fR to be used to format the device. Valid modes are:
.RS
.IPfull
Format the entire disk with the specified blocksize. (default)
.IPquick
Format the first two tracks and write label and partition information. Only use
this option if you are sure that the target DASD already contains a regular
format with the specified blocksize. A blocksize can optionally be specified
using \fB-b\fR (\fB--blocksize\fR).
Format the first two tracks and write label and partition information.
.br
Use this option for DASD ESE volumes to take the benefits of thin provisioning.
In this case, a full space release precedes the formatting step. If this space
release fails, then the formatting also fails. Specify the \fB\-\-no\-discard\fR
option to omit the space release.
.br
For non-ESE volumes use this option only if you are sure that the target DASD
already contains a regular format with the specified blocksize. A blocksize can
optionally be specified using \fB\-b\fR (\fB\-\-blocksize\fR).
.IPexpand
Format all unformatted tracks at the end of the target DASD. This mode assumes
that tracks at the beginning of the DASD volume have already been correctly
formatted, while a consecutive set of tracks at the end are unformatted. You can
use this mode to make added space available for Linux use after dynamically
increasing the size of a DASD volume. A blocksize can optionally be specified
using \fB-b\fR (\fB--blocksize\fR).
using \fB\-b\fR (\fB\-\-blocksize\fR).
.RE
.TP
\fB--check\fR
\fB\-\-check\fR
Perform a complete format check on a DASD volume. A blocksize can be specified
with \fB-b\fR (\fB--blocksize\fR).
with \fB\-b\fR (\fB\-\-blocksize\fR).
.TP
\fB-r\fR\fIcylindercount\fR or \fB--requestsize\fR=\fIcylindercount\fR
\fB\-\-no\-discard\fR
Omit a full space release when formatting a thin-provisioned DASD ESE volume.
.TP
\fB\-r\fR\fIcylindercount\fR or \fB\-\-requestsize\fR=\fIcylindercount\fR
Number of cylinders to be processed in one formatting step.
The value must be an integer in the range 1 - 255.
.br
@@ -147,48 +158,47 @@ devices, counting the base device and all alias devices.
.br
.TP
\fB-b\fR\fIblksize\fR or \fB--blocksize\fR=\fIblksize\fR
\fB\-b\fR\fIblksize\fR or \fB\-\-blocksize\fR=\fIblksize\fR
Specify blocksize to be used. \fIblksize\fR must be a positive integer
and always be a power of two. The recommended blocksize is 4096 bytes.
.TP
\fB-l\fR\fIvolser\fR or \fB--label\fR=\fIvolser\fR
Specify the volume serial number or volume identifier to be written
to disk after formatting. If no label is specified, a sensible default
is used. \fIvolser\fR is interpreted as ASCII string and is automatically
\fB\-l\fR\fIvolser\fR or \fB\-\-label\fR=\fIvolser\fR
Specify the volume serial number or volume identifier to be written
to disk after formatting. If no label is specified, a sensible default
is used. \fIvolser\fR is interpreted as ASCII string and is automatically
converted to uppercase and then to EBCDIC.
.br
e.g. -l LNX001 or --label=DASD01
e.g. \-l LNX001 or \-\-label=DASD01
.br
The \fIvolser\fR identifies by serial number the volume. A volume serial
The \fIvolser\fR identifies by serial number the volume. A volume serial
number is 1 through 6 alphanumeric or one of the following special
characters: $, #, @, %. Enclose a serial number that contains special
characters in apostrophes. If the number is shorter than six
characters: $, #, @, %. Enclose a serial number that contains special
characters in apostrophes. If the number is shorter than six
characters, it is padded with trailing blanks.
.br
.br
Do notcodea volume serial number as SCRTCH, PRIVAT, orLnnnnn(L with
five numbers); these areusedin OS/390 messages toaskthe operator to
mount avolume.Donotcodea volume serial number as MIGRAT, which is
used bythe OS/390 Hierarchical Storage Manager DFSMShsm for migrated
Do not code a volumeserialnumber as SCRTCH,PRIVAT, or Lnnnnn (L with
fivenumbers);these are used in OS/390messages to ask the operator to
mount a volume. Do not code a volumeserialnumber as MIGRAT,which is
used by the OS/390HierarchicalStorageManagerDFSMShsm for migrated
data sets.
.br
NOTE: Try to avoid using special characters in the volume serial. This may cause problems accessing a disk by volser.
NOTE: Try to avoid using special characters in the volume serial. This may cause problems accessing a disk by volser.
.br
In case you really have to use special characters, make sure you are using quotes. In addition there is a special handling for the '$' sign. Please specify it using '\\$' if necessary.
.br
e.g. -l 'a@b\\$c#' to get A@B$C#
e.g. \-l 'a@b\\$c#' to get A@B$C#
.br
.TP
\fB-k\fR or \fB--keep_volser\fR
Keeps the Volume Serial Number, when writing the Volume Label. This is
useful, if the Serial Number has been written with a VM Tool and should not
be overwritten.
\fB\-k\fR or \fB\-\-keep_volser\fR
Keeps the Volume Serial Number when writing the Volume Label. This is useful if
the volume already has a Serial Number that should not be overwritten.
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
