The cmsfs_write function only writes a single record in line mode
and returns the number of bytes it consumed from the input buffer.
This is valid behaviour as the write system call can always return
with a partial write. But there are tools that ignore the return
value of the write and just assume that a single write call is
sufficient to write many lines aka records on the cmsfs filesystem.
Enhance the cmsfs_write function to loop until all lines from the
input buffer have been consumed.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
GCC8 shows the following compile warning:
cmsfs-fuse.c: In function ‘convert_text’:
cmsfs-fuse.c:2558:19: warning: passing argument 2 to restrict-qualified
parameter aliases with argument 4 [-Wrestrict]
rc = iconv(conv, &data_ptr, &in_count, &data_ptr, &out_count);
^~~~~~~~~ ~~~~~~~~~
Fix this by using a separate buffer for iconv. The buffer size depends on
the record format: variable-length records have a maximum length of
MAX_RECORD_LEN (plus 1 byte for linefeed), while fixed-length records
could be larger in theory. This patch takes that into account for the iconv
buffer, but the rest of the code currently cannot handle fixed-length records
larger than MAX_RECORD_LEN.
Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Commit aefc8cd3ff ("libutil/libu2s: Move strlcpy() implementation to
libutils") added a dependency to libutil. This is not necessary and
could potentially lead to parallel build errors. Remove the dependency.
Fixes: aefc8cd3ff ("libutil/libu2s: Move strlcpy() implementation to libutils")
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
There are several reasons why an operation might fail. Either the
running kernel, the PCI function itself, or the hypervisor lacks support
for a certain operation. In such cases the kernel returns either with
EIO or EOPNOTSUPP.
The corresponding warning, however, just says the file couldn't be
closed. Display a warning for EIO and EOPNOTSUPP to tell the user about
the missing support.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Make the error message when the CCA library is missing more
user friendly. Also display an URL where the CCA package
can be downloaded.
The CCA library is used for the REENCIPHER commands of
zkey and zkey-cryptsetup and must be installed separately
as part of the IBM CCA Host Libraries and Tools package.
This packages is not provided by the distributors, but must
be downloaded from an IBM web page and installed separately.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Get rid of the following GCC8 compile warning by using different buffers
for input/output:
In file included from vmdump_convert.cpp:13:
vm_dump.h: In member function ‘void VMDump::ebcAsc(char*, size_t)
const’:
vm_dump.h:145:26: warning: passing argument 2 to restrict-qualified
parameter aliases with argument 4 [-Wrestrict]
iconv(ebcdicAsciiConv, &inout, &len, &inout, &len);
^~~~~~ ~~~~~~
vm_dump.h:145:34: warning: passing argument 3 to restrict-qualified
parameter aliases with argument 5 [-Wrestrict]
iconv(ebcdicAsciiConv, &inout, &len, &inout, &len);
^~~~ ~~~~
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Get rid of the following GCC8 compile warning by using different buffers
for input/output:
qethqoat.c: In function ‘ebctoasc’:
qethqoat.c:51:30: warning: passing argument 2 to restrict-qualified
parameter aliases with argument 4 [-Wrestrict]
iconv(l_iconv_ebcdic_ascii, &inout, &len, &inout, &len);
^~~~~~ ~~~~~~
qethqoat.c:51:38: warning: passing argument 3 to restrict-qualified
parameter aliases with argument 5 [-Wrestrict]
iconv(l_iconv_ebcdic_ascii, &inout, &len, &inout, &len);
^~~~ ~~~~
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Make sure there are two different buffers passed to iconv() to get rid
of the following GCC8 compile warning:
helper.c: In function ‘ht_ebcdic_to_ascii’:
helper.c:103:30: warning: passing argument 2 to restrict-qualified
parameter aliases with argument 4 [-Wrestrict]
iconv(l_iconv_ebcdic_ascii, &inout, &len, &inout, &len);
^~~~~~ ~~~~~~
helper.c:103:38: warning: passing argument 3 to restrict-qualified
parameter aliases with argument 5 [-Wrestrict]
iconv(l_iconv_ebcdic_ascii, &inout, &len, &inout, &len);
^~~~ ~~~~
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Commit 851f685993 ("Makefile: Add dependency between libvmcp and
libutil to fix -j builds") introduced the following regression
$ make clean
CLEAN /home2/holzheu/src/s390-tools
...
CLEAN libccw
CC libutil/util_base.o
CC libutil/util_path.o
For the "clean" target the new library dependency triggers a build
of libutil.
So remove the dependency again.
To fix the parallel build issue, no longer build the examples with
"make all" and add a new target "examples" that can now be used for building
the example programs.
Fixes: 851f685993 ("Makefile: Add dependency between libvmcp and libutil to fix -j builds")
Signed-off-by: Michael Holzheu <holzheu@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Most bootloaders use the BootLoaderSpec "title" field to name the entries
in their boot menu. The zipl bootloader used the "version" field instead,
since it was wrongly assumed that the zipl boot menu didn't support names
that contained spaces, which are usually present in a BLS "title" field.
But this is not the case, names with space characters are supported by the
IPL and is just a constraint of the section heading in the zipl.conf file.
So to be consistent with all the other bootloaders, use the "title" field
also on zipl when populating the boot menu entries from BLS files.
Closes: https://github.com/ibm-s390-tools/s390-tools/pull/47
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reviewed-by: Stefan Haberland sth@linux.ibm.com
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Use util_strlcpy() to copy log data correctly and get rid of the
following GCC8 compile warning:
zpcictl.c: In function ‘sclp_issue_action’:
zpcictl.c:312:3: warning: ‘strncpy’ specified bound 4054 equals
destination size [-Wstringop-truncation]
strncpy(report.data.log_data, sdata, sizeof(report.data.log_data));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Use util_strlcpy() to copy strings correctly and get rid of the
following GCC8 compile warning:
In function ‘hmcdrv_parse_line’,
inlined from ‘hmcdrv_cache_dir’ at hmcdrvfs.c:981:11:
hmcdrvfs.c:862:4: warning: ‘strncpy’ specified bound 192 equals
destination size [-Wstringop-truncation]
strncpy(symlink, arrow + 4, HMCDRV_FUSE_MAXPATH);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
By using util_strlcpy() and correctly copying strings we can get rid of
the following GCC8 compile warnings:
In function ‘path_to_ds_name.constprop’,
inlined from ‘zdsfs_readdir’ at zdsfs.c:282:2:
zdsfs.c:78:2: warning: ‘strncpy’ specified bound 45 equals destination
size [-Wstringop-truncation]
strncpy(normds, path, size);
^~~~~~~~~~~~~~~~~~~~~~~~~~~
In function ‘path_to_ds_name.constprop’,
inlined from ‘zdsfs_open’ at zdsfs.c:339:2:
zdsfs.c:78:2: warning: ‘strncpy’ specified bound 45 equals destination
size [-Wstringop-truncation]
strncpy(normds, path, size);
^~~~~~~~~~~~~~~~~~~~~~~~~~~
In function ‘path_to_member_name.constprop’,
inlined from ‘zdsfs_open’ at zdsfs.c:372:3:
zdsfs.c:94:3: warning: ‘strncpy’ specified bound 45 equals destination
size [-Wstringop-truncation]
strncpy(normds, path, size);
^~~~~~~~~~~~~~~~~~~~~~~~~~~
In function ‘path_to_ds_name.constprop’,
inlined from ‘zdsfs_getxattr’ at zdsfs.c:527:2:
zdsfs.c:78:2: warning: ‘strncpy’ specified bound 45 equals destination
size [-Wstringop-truncation]
strncpy(normds, path, size);
^~~~~~~~~~~~~~~~~~~~~~~~~~~
In function ‘path_to_member_name.constprop’,
inlined from ‘zdsfs_getxattr’ at zdsfs.c:547:4:
zdsfs.c:94:3: warning: ‘strncpy’ specified bound 45 equals destination
size [-Wstringop-truncation]
strncpy(normds, path, size);
^~~~~~~~~~~~~~~~~~~~~~~~~~~
In function ‘path_to_ds_name.constprop’,
inlined from ‘zdsfs_getattr.part.1’ at zdsfs.c:134:2,
inlined from ‘zdsfs_getattr’:
zdsfs.c:78:2: warning: ‘strncpy’ specified bound 45 equals destination
size [-Wstringop-truncation]
strncpy(normds, path, size);
^~~~~~~~~~~~~~~~~~~~~~~~~~~
In function ‘path_to_member_name.constprop’,
inlined from ‘zdsfs_getattr.part.1’ at zdsfs.c:164:3,
inlined from ‘zdsfs_getattr’:
zdsfs.c:94:3: warning: ‘strncpy’ specified bound 45 equals destination
size [-Wstringop-truncation]
strncpy(normds, path, size);
^~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Use the more robust util_strlcpy() to copy strings instead of strncpy().
This fixes the following GCC8 compile warnings:
qethqoat.c: In function ‘main’:
qethqoat.c:616:2: warning: ‘strncpy’ specified bound 16 equals
destination size [-Wstringop-truncation]
strncpy(ifr.ifr_name, opts.ifname, IFNAMSIZ);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Make sure strings are copied correctly by using util_strlcpy().
Also, rename the NIC_{OWNER,NAME}_LEN definitions to *_SIZE to make it
more clear that the terminating null byte ('\0') is included in this
buffer size. Using *_LEN would mean only the number of characters in the
string fit in.
Furthermore, use these definitions rather than sizeof().
This fixes the following GCC8 compile warning:
nic.c: In function ‘nic_data_get’:
nic.c:58:2: warning: ‘strncpy’ specified bound 9 equals destination size
[-Wstringop-truncation]
strncpy(data.owner, argv[11], sizeof(data.owner));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
nic.c:59:2: warning: ‘strncpy’ specified bound 9 equals destination size
[-Wstringop-truncation]
strncpy(data.name, argv[12], sizeof(data.name));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Change the buffer size to what we actually need and use util_strlcpy()
to correctly copy strings.
This gets rid of the following GCC8 compile warnings:
fcp.c: In function ‘fcp_wwpn_get’:
fcp.c:44:2: warning: ‘strncpy’ output may be truncated copying 20 bytes
from a string of length 4095 [-Wstringop-truncation]
strncpy(wwpn, buf, 20);
^~~~~~~~~~~~~~~~~~~~~~
fcp.c: In function ‘fcp_lun_get’:
fcp.c:65:2: warning: ‘strncpy’ output may be truncated copying 20 bytes
from a string of length 4095 [-Wstringop-truncation]
strncpy(lun, buf, 20);
^~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Use util_asprintf() to allocate memory for the string buffers
dynamically and get rid of the following GCC8 compile warnings:
system.c: In function ‘print_fw_str’:
system.c:86:46: warning: ‘%s’ directive output may be truncated writing
up to 4095 bytes into a region of size 4082 [-Wformat-truncation=]
snprintf(path, sizeof(path), "/sys/firmware/%s", file);
^~
system.c:98:19:
read_fw_str(str, path, sizeof(str));
~~~~
system.c:86:2: note: ‘snprintf’ output between 15 and 4110 bytes into a
destination of size 4096
snprintf(path, sizeof(path), "/sys/firmware/%s", file);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cmd_chreipl.c: In function ‘set_reipl_type_helper’:
cmd_chreipl.c:316:19: warning: ‘%d’ directive writing between 1 and 11
bytes into a region of size between 0 and 4095 [-Wformat-overflow=]
sprintf(cmd, "%s %d:%d", chreipl_helper, major(dev), minor(dev));
^~
cmd_chreipl.c:316:15: note: using the range [-2147483648, 2147483647]
for directive argument
sprintf(cmd, "%s %d:%d", chreipl_helper, major(dev), minor(dev));
^~~~~~~~~~
cmd_chreipl.c:316:15: note: using the range [-2147483648, 2147483647]
for directive argument
cmd_chreipl.c:316:2: note: ‘sprintf’ output between 5 and 4120 bytes
into a destination of size 4096
sprintf(cmd, "%s %d:%d", chreipl_helper, major(dev), minor(dev));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Use util_strlcpy() to copy strings correctly and get rid of the
following GCC8 compile warnings:
main.c: In function ‘main’:
main.c:34:2: warning: ‘strncpy’ specified bound 256 equals destination
size [-Wstringop-truncation]
strncpy(g.prog_name, argv[0], sizeof(g.prog_name));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In function ‘set_bootprog’,
inlined from ‘parse_chreipl_options’ at cmd_chreipl.c:510:4:
cmd_chreipl.c:185:2: warning: ‘strncpy’ specified bound 11 equals
destination size [-Wstringop-truncation]
strncpy(l.bootprog, bootprog, sizeof(l.bootprog));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cmd_chreipl.c: In function ‘set_reipl_type’:
cmd_chreipl.c:297:2: warning: ‘strncpy’ specified bound 15 equals
destination size [-Wstringop-tr uncation]
strncpy(l.dev, dev_name, sizeof(l.dev));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Copy strings correctly by using util_strlcpy() over strncpy() and get
rid of the following GCC8 compile warning:
In function ‘dinfo_extract_dev’,
inlined from ‘dinfo_get_dev_from_blockdev’ at dasdinfo.c:365:6:
dasdinfo.c:337:2: warning: ‘strncpy’ specified bound 80 equals
destination size [-Wstringop-trunc ation]
strncpy(tmp, str, RD_BUFFER_SIZE);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
IFNAMSIZ is the maximum buffer size for an interface name, including its
terminating zero byte. [1] strncpy() should therefore only copy a size
of 'IFNAMSIZ - 1' and the destination string should then be
null-terminated properly.
Use util_strlcpy() to correctly copy the string and get rid of the
followin GCC8 compile warning:
In function ‘ethtool_checksumming’,
inlined from ‘process_sysfs_attribute’ at lsqeth.c:333:5,
inlined from ‘print_device’ at lsqeth.c:468:3:
lsqeth.c:171:2: warning: ‘strncpy’ specified bound 16 equals destination
size [-Wstringop-truncat ion]
strncpy(ifr.ifr_name, if_name, IFNAMSIZ);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[1]: https://www.gnu.org/software/libc/manual/html_node/Interface-Naming.html
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Get rid of fixed buffers and avoid the following GCC8 compile warnings:
lszcrypt.c: In function ‘main’:
lszcrypt.c:642:28: warning: ‘%04x’ directive writing between 4 and 8
bytes into a region of size between 7 and 13 [-Wformat-overflow=]
sprintf(sub_dev, "%02x.%04x", id, dom);
^~~~
lszcrypt.c:642:22: note: directive argument in the range [0, 2147483647]
sprintf(sub_dev, "%02x.%04x", id, dom);
^~~~~~~~~~~
lszcrypt.c:642:5: note: ‘sprintf’ output between 8 and 18 bytes into a
destination of size 16
sprintf(sub_dev, "%02x.%04x", id, dom);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
DEV_NAME_SIZE is defined as IFNAMSIZ. IFNAMSIZ is the maximum buffer size
for an interface name, including its terminating null byte. [1] The
buffers dev_name and ifr_name are both defined with a size of
DEV_NAME_SIZE and IFNAMSIZ respectively.
Given these facts, only a size of 'IFNAMSIZ - 1' should be copied and
the destination string should then be null-terminated properly.
Use util_strlcpy() to correctly copy the strings and rid of the followin
GCC8 compile warnings:
xcec-bridge.c: In function ‘open_incoming_socket’:
xcec-bridge.c:94:2: warning: ‘strncpy’ specified bound 16 equals
destination size [-Wstringop-tru ncation]
..strncpy(if_req.ifr_name,dev_name,DEV_NAME_LEN);
..^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
xcec-bridge.c: In function ‘read_sys’:
xcec-bridge.c:284:4: warning: ‘strncpy’ output may be truncated copying
16 bytes from a string of length 255 [-Wstringop-truncation]
....strncpy(is->dev_name, if_name, DEV_NAME_LEN);
....^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[1]: https://www.gnu.org/software/libc/manual/html_node/Interface-Naming.html
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The term 'len' only represents the number of characters in a string,
as opposed to 'size' which means the number of bytes including the
terminating null byte ('\0').
DEV_NAME_LEN is defined as IFNAMSIZ, so we are clearly interested in the
size. Rename to DEV_NAME_SIZE to make this more clear.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The strlcpy() implementation in libu2s is beneficial for other tools as
well. Move the implementation to libutils and replace misc_strlcpy() in
libu2s accordingly.
Change the link order in zipl to make it build again.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Safely replace strncpy() with memcpy() as we don't want the terminating
null byte anyway. Get rid of the following warning:
dasdview.c: In function ‘dasdview_print_volser’:
dasdview.c:621:3: warning: ‘strncpy’ output truncated before terminating
nul copying 6 bytes from a string of the same length
[-Wstringop-truncation]
strncpy(volser, " ", 6);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
While assembling the volume label, strncpy() is used. As we don't care
about NUL termination of the strings here, safely replace strncpy() with
memcpy() and get rid of the following compile warnings:
fdasd.c: In function ‘fdasd_write_vtoc_labels’:
fdasd.c:1324:4: warning: ‘strncpy’ output truncated before terminating
nul copying 44 bytes from a string of the same length
[-Wstringop-truncation]
strncpy(ch, "LINUX.V "
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
" ", 44);
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
fdasd.c:1332:4: warning: ‘strncpy’ output truncated before terminating
nul copying 5 bytes from a string of the same length
[-Wstringop-truncation]
strncpy(c1, ".PART", 5);
^~~~~~~~~~~~~~~~~~~~~~~
In function ‘fdasd_write_vtoc_labels’,
inlined from ‘fdasd_write_labels’ at fdasd.c:1399:3:
fdasd.c:1329:4: warning: ‘strncpy’ output may be truncated copying 6
bytes from a string of length 6 [-Wstringop-truncation]
strncpy(c1, volser, VOLSER_LENGTH);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
fdasd.c:1336:4: warning: ‘strncpy’ output may be truncated copying 5
bytes from a string of length 5 [-Wstringop-truncation]
strncpy(c1, dsno, 5);
^~~~~~~~~~~~~~~~~~~~
fdasd.c:1340:4: warning: ‘strncpy’ output truncated before terminating
nul copying as many bytes from a string as its length
[-Wstringop-truncation]
strncpy(c1, dsname, strlen(dsname)); /* We don't want \0 */
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
fdasd.c:1313:4: warning: ‘strncpy’ output may be truncated copying 31
bytes from a string of length 44 [-Wstringop-truncation]
strncpy(c1, s2, 31);
^~~~~~~~~~~~~~~~~~~
In function ‘fdasd_change_part_type’,
inlined from ‘main’ at fdasd.c:3000:4:
fdasd.c:1639:3: warning: ‘strncpy’ output may be truncated copying 6
bytes from a string of length 19 [-Wstringop-truncation]
strncpy(ch, str, 6);
^~~~~~~~~~~~~~~~~~~
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
We can safely replace strncpy() with memcpy() here and get rid of the
following compile warnings:
dfi_s390mv.c: In function ‘set_magic_numbers’:
dfi_s390mv.c:570:3: warning: ‘strncpy’ output truncated before
terminating nul copying 7 bytes fr om a string of the same length
[-Wstringop-truncation]
strncpy(l.dumper_magic, DF_S390_DUMPER_MAGIC_MV_EXT, 7);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
dfi_s390mv.c:573:3: warning: ‘strncpy’ output truncated before
terminating nul copying 7 bytes fr om a string of the same length
[-Wstringop-truncation]
strncpy(l.dumper_magic, DF_S390_DUMPER_MAGIC_MV, 7);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Using inappropriate sizes for snprintf() leads to the following compile
warnings:
dfi_s390mv.c: In function ‘dev_from_busid’:
dfi_s390mv.c:116:34: warning: ‘/online’ directive output may be
truncated writing 7 bytes into a region of size between 1 and 4096
[-Wformat-truncation=]
snprintf(tmp_file, PATH_MAX, "%s/online", dev_file);
^~~~~~~
dfi_s390mv.c:116:2: note: ‘snprintf’ output between 8 and 4103 bytes
into a destination of size 4096
snprintf(tmp_file, PATH_MAX, "%s/online", dev_file);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
dfi_s390mv.c:143:35: warning: ‘%s’ directive output may be truncated
writing up to 255 bytes into a region of size between 0 and 4095
[-Wformat-truncation=]
snprintf(tmp_file, PATH_MAX, "%s/%s/dev", dev_file, direntp->d_name);
^~
dfi_s390mv.c:143:2: note: ‘snprintf’ output between 6 and 4356 bytes
into a destination of size 4096
snprintf(tmp_file, PATH_MAX, "%s/%s/dev", dev_file, direntp->d_name);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
A simple fix would be to use different suitable fixed sizes for tmp_file
and dev_file. However, the code can be improved here a little.
Use the libutil function util_path_sysfs() to build the sysfs path
string. This is more robust, as the function will figure out the correct
mount point of the sysfs. util_path_sysfs() will also terminate
execution, if no sysfs mount point could be found. That means, we can
get rid of check_sysfs().
Furthermore, the two variables (tmp_file, dev_file) can be combined to
one. Also, check the return value of open() and act accordingly.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Use misc_asprintf() for concatenating strings and get rid of the
following GCC8 compile warnings:
disk.c: In function ‘disk_get_info’:
disk.c:247:43: warning: ‘%d’ directive output may be truncated writing
between 1 and 11 bytes int o a region of size between 0 and 79
[-Wformat-truncation=]
snprintf(ppn_cmd, sizeof(ppn_cmd), "%s %d:%d",
^~
disk.c:247:39: note: using the range [-2147483648, 2147483647] for
directive argument
snprintf(ppn_cmd, sizeof(ppn_cmd), "%s %d:%d",
^~~~~~~~~~
disk.c:247:39: note: using the range [-2147483648, 2147483647] for
directive argument
disk.c:247:4: note: ‘snprintf’ output between 5 and 104 bytes into a
destination of size 80
snprintf(ppn_cmd, sizeof(ppn_cmd), "%s %d:%d",
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
script_file, major(stats.st_rdev),
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
minor(stats.st_rdev));
~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Using the DATA_SIZE() macro gets rid of the following GCC8 compile
warning:
boot.c: In function ‘boot_init_fba_stage0’:
boot.c:120:2: warning: ‘memcpy’ forming offset [2, 152] is out of the
bounds [0, 1] of object ‘_binary_fba0_bin_start’ with type ‘char’
[-Warray-bounds]
memcpy(stage0, DATA_ADDR(fba0), sizeof(*stage0));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from boot.c:18:
../boot/data.h:24:13: note: ‘_binary_fba0_bin_start’ declared here
extern char _binary_fba0_bin_start;
^~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
With GCC8 the following warning is displayed:
In file included from cio.h:15,
from stage2.h:15,
from menu.h:15,
from stage2.c:14:
s390.h:193:1: warning: alignment 1 of ‘struct _lowcore’ is less than 8
[-Wpacked-not-aligned]
} __packed;
^
Fix by aligning struct _lowcore to double page size.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The message buffer of DumpException doesn't account for additional
strings such as strerror(), device nodes, or filenames. Make it a bit
larger to be safe.
This fixes the following GCC8 compile warnings:
In file included from vm_dump.h:62,
from vm_dump.cpp:17:
dump.h: In static member function ‘static Dump::DumpType
VMDump::getDumpType(const char*)’:
dump.h:46:16: warning: ‘ (’ directive writing 2 bytes into a region of size
between 1 and 200 [-W format-overflow=]
sprintf(msg, "%s (%s)", m, strerror(errno));
^~~~~~~~~
dump.h:46:10: note: ‘sprintf’ output 4 or more bytes (assuming 203) into a
destination of size 200
sprintf(msg, "%s (%s)", m, strerror(errno));
~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
dump.h:46:16: warning: ‘ (’ directive writing 2 bytes into a region of size
between 1 and 200 [-W format-overflow=]
sprintf(msg, "%s (%s)", m, strerror(errno));
^~~~~~~~~
dump.h:46:10: note: ‘sprintf’ output 4 or more bytes (assuming 203) into a
destination of size 200
sprintf(msg, "%s (%s)", m, strerror(errno));
~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
dump.h:46:16: warning: ‘ (’ directive writing 2 bytes into a region of size
between 1 and 200 [-W format-overflow=]
sprintf(msg, "%s (%s)", m, strerror(errno));
^~~~~~~~~
dump.h:46:10: note: ‘sprintf’ output 4 or more bytes (assuming 203) into a
destination of size 200
sprintf(msg, "%s (%s)", m, strerror(errno));
~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
To assemble things like the volume id or fields of the format1 label
struct, strncpy() is used. Data copied here is later written to disk and
we don't want any terminating null byte ('\0') there. Therefore, we can
simply use memcpy() instead and get rid of the following GCC8 compile
warnings:
vtoc.c: In function ‘vtoc_init_format_1_8_label’:
vtoc.c:747:2: warning: ‘strncpy’ output truncated before terminating nul
copying 6 bytes from a s tring of the same length [-Wstringop-truncation]
strncpy((char *) f1->DS1DSSN, " ", 6);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
vtoc.c:746:2: warning: ‘strncpy’ output may be truncated copying 44 bytes from
a string of length 79 [-Wstringop-truncation]
strncpy(f1->DS1DSNAM, str, 44);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
vtoc.c:761:2: warning: ‘strncpy’ output may be truncated copying 13 bytes from
a string of length 79 [-Wstringop-truncation]
strncpy((char *)f1->DS1SYSCD, str, 13);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
vtoc.c: In function ‘vtoc_volume_label_set_volser’:
vtoc.c:401:2: warning: ‘strncpy’ output may be truncated copying 6 bytes from a
string of length 6 [-Wstringop-truncation]
strncpy(vlabel->volid, s, VOLSER_LENGTH);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
fread()/fwrite() return the unsigned count of elements read/written or a
short count or zero in case of an error. Check if the number of elements
read/written matches the expectation. In case of fread(), if it does not
match, check if an error occurred and otherwise assume the file to be too
small. In case of fwrite(), if it does not match, assume an error.
Resolves Cppcheck style warnings:
[zkey/pkey.c:161]: (style) Checking if unsigned variable 'count' is less than zero.
[zkey/pkey.c:209]: (style) Checking if unsigned variable 'count' is less than zero.
[zkey/pkey.c:299]: (style) Checking if unsigned variable 'count' is less than zero.
Cc: Ingo Franzki <ifranzki@de.ibm.com>
Signed-off-by: Jens Remus <jremus@linux.ibm.com>
Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
When realloc() fails to allocate memory it returns NULL and the original
block is left untouched. In that case return the potentially larger
original block.
Found using Cppcheck:
[zdev/src/misc.c:1106]: (error) Memory leak: name
Cc: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: Jens Remus <jremus@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The modified flag was actually never copied during merge of setting lists.
Copy the modified flag if requested.
Found using Cppcheck:
[zdev/src/setting.c:553]: (warning) Redundant assignment of 'n->modified' to itself.
Cc: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: Jens Remus <jremus@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The computation of blk in functions fdasd_check_volume() and
fdasd_write_vtoc_labels() contained the possibility for an undetected
unsigned integer overflow. Unconditionally subtracting one from the
return value of function cchhb2blk() may cause an unsigned integer
overflow, as cchhb2blk() may return zero if cc, hh, and b are all zero.
Resolves Cppcheck style warning:
[fdasd/fdasd.c:1260]: (style) Checking if unsigned variable 'blk' is less than zero.
Cc: Stefan Haberland <sth@linux.ibm.com>
Cc: Jan Hoeppner <hoeppner@linux.ibm.com>
Signed-off-by: Jens Remus <jremus@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Only check if size is zero and not if equal or less than zero. This is
safe, as size is only decremented by rlen, which is either less than or
equal to size. So size may never overflow.
Resolves Cppcheck style warning:
[cmsfs-fuse/cmsfs-fuse.c:3746]: (style) Checking if unsigned variable 'size' is less than zero.
Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Jens Remus <jremus@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
For linking the "libvmcp" example program the "libutil" is required.
Therefore when the "libvmcp" directory is entered in a parallel build
and the "libutil.a" file has not yet been created, a second "libutil"
build is triggered which can then lead to build errors like the following:
ar: libutil.a: File format not recognized
ar: libutil.a: No such file or directory
make[2]: Leaving directory '/builddir/build/BUILD/s390-tools-2.6.0/libutil'
make[2]: *** [../common.mak:246: libutil.a] Error 1
make[1]: *** [../common.mak:246: libutil.a] Error 1
make[1]: *** Waiting for unfinished jobs....
make[1]: *** [../common.mak:315: ..//libutil/libutil.a] Error 2
make[1]: Leaving directory '/builddir/build/BUILD/s390-tools-2.6.0/libvmcp'
make: *** [Makefile:57: libvmcp] Error 2
make: *** Waiting for unfinished jobs....
ving directory '/builddir/build/BUILD/s390-tools-2.6.0/libutil'
make: *** [Makefile:57: libutil] Error 2
error: Bad exit status from /var/tmp/rpm-tmp.wCulxB (%build)
So fix this and add a dependency between libvmcp and libutil.
Signed-off-by: Michael Holzheu <holzheu@linux.ibm.com>
Reviewed-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
When using 'zkey cryptsetup' with the '--run' option,
it might not find the executable to execute when those
are in /sbin.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Change all error messages from printf() to warnx().
While at it, remove the punctuation mark for some of the error messages.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The .o.d make targets in common.mak do not expect that
header files are generated by a make target. When a new header
file is generated, the .o.d targets will be rebuilt on the
next make invocation, because that new header file is then
detected, and is then treated as a new dependency of all .o.d
targets.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The linux.vnet.ibm.com addresses will be become disfunct by eoy.
Signed-off-by: Stefan Raspl <raspl@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add the missing identifiers to report the card name and link speed.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Print a meaningful reason when the keystore can not be
accessed, e.g. because the user is not allowed to access
the keystore directory.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Dump compression was a feature of the file system dumper which was removed
several years ago. This include is a leftover. Remove it.
Signed-off-by: Philipp Rudo <prudo@linux.ibm.com>
Acked-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Remove unused code because query_OSA_EXP does actually never return -1.
So make its return value unsigned and remove all checks for negative
return values.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Osasnmpd would start without any devices, but refuses to start when all
devices are no real OSA devices.
Start osasnmpd in this case because it re-scans via update_mib_info
whenever the interface data changes.
Reviewed-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The util_scandir_* functions may return 0 or -1, in which case no vector
is allocated in libutil/util_scandir.c. util_ptr_vec_free, called by
util_scandir_free or directly from lschp.c and lsscm.c, does always
call free for the vector which might be not initialized.
Fix this by always initializing the vector with NULL in __scandir and
add some api hardening by checking the vector and count in
util_ptr_vec_free before iterating over the vector.
And update the comment for util_scandir to indicate that -1 may be
returned in error cases plus that the vector is initialized with NULL.
Fixes: https://github.com/ibm-s390-tools/s390-tools/issues/43
Reported-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Unfortunately zdev hook already exists in Ubuntu, from an unrelated
project. ZFS uses zdev/zpool names, and ships a zdev hook to do ZFS
specific initialisation. It is available on s390x and thus results in
file-conflict upon installing both. Thus renaming this zdev hook to
s390-tools-zdev.
Closes: https://github.com/ibm-s390-tools/s390-tools/pull/41
Signed-off-by: Dimitri John Ledkov <xnox@ubuntu.com>
Acked-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
At the moment, if we specify the slot address of an NVMe device but
can't find the corresponding device node, the execution is terminated.
This is a bit harsh as the device node is rather optional and only
necessary to collect S.M.A.R.T. data. We should still be able to issue
the error reporting, even if we couldn't determine the device node.
Therefore, make sure the device node for NVMe devices is optional by
changing various error messages to warnings.
Change sysfs_get_slot_addr() to have a return value and work with that
accordingly.
Also make sure, that execution is terminated when a valid device node
was specified but no matching slot address was determined. The slot
address is necessary to issue the error reporting commands.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The address sysfs attribute might not be present on some older kernel
levels. Read the device link instead using readlink() to obtain the
address.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Be consistent with the rest of the code and use fopen() rather than
open().
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This patch fixes false positives when attributes are checked for
conflicts between BridgePort and VNICC.
Signed-off-by: Hans Wippel <hwippel@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The minor()/major() function definitions are moved to sys/sysmacros.h
and will be removed from sys/types.h. To correct below warning, simply
include sys/sysmacros.h.
zpcictl.c: In function ‘sysfs_get_slot_addr’:
zpcictl.c:184:13: warning: In the GNU C Library, "major" is defined
by <sys/sysmacros.h>. For historical compatibility, it is
currently defined by <sys/types.h> as well, but we plan to
remove this soon. To use "major", include <sys/sysmacros.h>
directly. If you did not intend to use a system-defined macro
"major", you should undefine it after including <sys/types.h>.
major = major(dev_stat.st_rdev);
^~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
zpcictl is used to manage PCI devices on z Systems. In this first
version it is mainly used to handle erroneous PCI devices by changing
their state and make those changes known to the SE. Log data, such as
S.M.A.R.T. data for NVMe devices, is sent alongside those state changes.
The state change is issued by sending data via the PCI 'report_error'
sysfs attribute. It's a binary attribute which will cause the host to
send an Adapter Notification Event.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
With the latest kernel comes an extension for the zcrypt
device driver to support multiple zcrypt device nodes.
Here is the userspace part of this which adds a new
application zcryptctl for user friendly management of
this feature.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
zipl currently uses the FIBMAP ioctl to map blocks for the bootloader;
on XFS, if FIBMAP is requested on a reflinked file, it will fail -
and FIBMAP returns 0 in this case, which is indistinguishable from a
hole. This causes boot to fail because the file is not mapped.
We can use the FIEMAP ioctl instead, which is able to map reflinked
files. While FIEMAP is able to map entire extents at once, here we
simply use it to obtain the mapping block-by-block so that it fits
in with the current FIBMAP calls.
Fixes: https://github.com/ibm-s390-tools/s390-tools/issues/34
Closes: https://github.com/ibm-s390-tools/s390-tools/pull/36
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Tested-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
With kernel 4.19 there comes an extension to the existing
AP bus which supports alternate zcrypt drivers. For details
about this see kernel patch "s390/zcrypt: AP bus support for
alternate driver(s)". So now lszcrypt displays the driver
name in verbose mode. As some of the information displayed
by lszcrypt was based on sysfs attributes, which are only
available when the default zcrypt driver is bound to the
device, this also needed some rework. If a sysfs attribute
is not available because of an alternate driver binding
(or no driver) a question mark is printed into the field.
Together with this a slight rework of the displayed information
has been done. The two columns for pending requests and pending
replies has been merged to one pending column and the column
sizes have been adjusted.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
zdsfs writes output for --help and --version to stderr. This is
likely because zdsfs calls into a FUSE function for additional
usage output that also writes to stderr (prior to FUSE 3.0.0).
To be consistent with other s390-tools and GNU coding guide lines,
fix this by using stdout for zdsfs generated output, and by
redirecting stderr to stdout before calling the FUSE function.
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
tape390_display writes output for --help to stderr. To be consistent
with other s390-tools and GNU coding guide lines, fix this by using
stdout for tool-generated usage help.
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add missing long options for --help and --version in util_prg_example.
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Both iucvconn and iucvtty write output for --help to stderr. To be
consistent with other s390-tools and GNU coding guide lines,
fix this by using stdout for tool-generated usage help.
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
hmcdrvfs writes output for --help and --version to stderr. This is
likely because hmcdrvfs calls into a FUSE function for additional
usage output that also writes to stderr (prior to FUSE 3.0.0).
To be consistent with other s390-tools and GNU coding guide lines,
fix this by using stdout for hmcdrvfs generated output, and by
redirecting stderr to stdout before calling the FUSE function.
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
cmsfs-fuse writes output for --help and --version to stderr. This is
likely because cmsfs-fuse calls into a FUSE function for additional
usage output that also writes to stderr (prior to FUSE 3.0.0).
To be consistent with other s390-tools and GNU coding guide lines,
fix this by using stdout for cmsfs-fuse generated output, and by
redirecting stderr to stdout before calling the FUSE function.
Also remove an inactive call to add FUSE version output on --version to
be consistent with other FUSE-based s390-tools.
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Building zipl from outside the zipl/ sub-directory fails due to a
missing dependency:
# cd s390-tools
# make -C zipl/src/ zipl
boot.c:18:10: fatal error: ../boot/data.h: No such file or directory
#include "../boot/data.h"
This is because boot/data.h needs to be generated before src/boot.c can
be compiled. Fix this by adding the missing dependency to the zipl
Makefile.
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Assume "N/A" for non-zfcp SCSI devices, such as iSCSI or virtio-scsi-ccw,
to not erroneously access absent zfcp-specific sysfs attributes.
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Simply skip non-zfcp SCSI devices, such as iSCSI or virtio-scsi-ccw,
to not erroneously access absent zfcp-specific sysfs attributes.
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The default bash setting have nullglob disabled so if
$SCSI_DEV/scsi_generic*
aka
/sys/bus/scsi/devices/*:*:*:*/scsi_generic*
does not match anything, it leaves the glob pattern unmodified and
SG_DEV=$(basename $SG_DEV/*)
results in the literal:
*
If $SG_INQ exists, it invoked sg_inq with more than the one allowed
positional argument for a SCSI generic device node:
sg_inq /dev/*
Causing error messages and the usage of sg_inq to land in $TAPE_SERIAL.
To not have to rely on the nullglob setting, explicitly check for the
existence of $SCSI_DEV/scsi_generic before evaluating
SG_DEV=$(basename $SG_DEV/*).
Also handle availability of sg_inq but absence of scsi_generic
individually to provide the user with a hint if only sg is missing.
Suggested-by: Eric Farman <farman@linux.vnet.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Cc: Eric Farman <farman@linux.vnet.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This should be more stable than parsing the IBM lin_tape proc-fs output.
If sysfs is not available or provides no match, fall back to proc-fs.
An alternative to "ls -1d ... | head -n1" would have been to use
"shopt -s extglob; ls -d $SCSI_DEV/lin_tape/$DEV_NAME+([0-9])"
but I did not want to have to rely on extglob potentially influencing
other old code of lstape.
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
https://www.ibm.com/developerworks/linux/linux390/s390-tools-1.8.0.html
before the first upstream commit b627b8d8e1 ("Initial s390-tools-2.0.0
import") introduced SCSI tape/changer output for lstape. It used the SCSI
device serial number as lookup key to find a match in IBM lin_tape device
driver proc-fs output for a given SCSI device name. Since multiple paths
to the same tape/changer have the same serial number, multiple matches can
occur and distort the output:
% lstape
...
SCSI tape devices (found 12):
...
Generic Device Target Vendor Model Type State
sg0 IBMtape0 3 0:0:0:0 IBM ULT3580-TD6 tapedrv
running
sg1 IBMchanger0 1 2 3 0:0:0:1 IBM
3573-TL changer running
...
There are unexpected additional Device suffix numbers for each additional
path of the same tape/changer (independent of actual path failover
enablement in lin_tape). The multiple matches above cause excess arguments
to printf. Explaining the resulting output, the bash man page says:
"The format is reused as necessary to consume all of the arguments."
This also causes a wrong number of found devices.
Current lin_tape (v3.0.31) uses the printf format string
"%-8d%-12s%-25s%-16s%-16s%-10s" for fixed column proc-fs output.
This causes the following example input to lstape:
==> /proc/scsi/IBMchanger <==
lin_tape version: 3.0.31
lin_tape major number: 251
Attached Changer Devices:
Number model SN HBA SCSI FO Path
0 3573-TL 00L4U78W6497_LL0 Virtio SCSI HBA 0:0:0:1 Primary
1 3573-TL 00L4U78W6497_LL0 Virtio SCSI HBA 0:0:1:1 Alternate
2 3573-TL 00L4U78W6497_LL0 Virtio SCSI HBA 1:0:1:1 Alternate
3 3573-TL 00L4U78W6497_LL0 Virtio SCSI HBA 1:0:0:1 Alternate
==> /proc/scsi/IBMtape <==
lin_tape version: 3.0.31
lin_tape major number: 251
Attached Tape Devices:
Number model SN HBA SCSI FO Path
0 ULT3580-TD6 10WT037733 Virtio SCSI HBA 0:0:0:0 Primary
1 ULT3580-TD6 10WT037701 Virtio SCSI HBA 0:0:1:0 Primary
2 ULT3580-TD6 10WT037701 Virtio SCSI HBA 1:0:1:0 Alternate
3 ULT3580-TD6 10WT037733 Virtio SCSI HBA 1:0:0:0 Alternate
If that was reliable and stable, we could use fixed column parsing:
IBM_IDX=$(
awk 'BEGIN {
FIELDWIDTHS="8 12 25 16 16 10"
}
gensub(" ","","g",$5) == "'$SCSI_ID'"{
print gensub(" ","","g",$1)
}' /proc/scsi/$DEV_NAME
)
However, we can hardly guarantee a field value always fits into the left-
adjusted columns (printf won't cap to field width!). Also, the fixed column
format changed between lin_tape v3.0.20 and v3.0.18 from
"%-8d%-12s%-18s%-16s%-16s%-10s" with less width for the 'SN' field.
The column format also changed between v2.2.0 and v1.37.0 from
"%-8d%-12s%-18s%-32s%-10s" where the 'SCSI' field did not even exist.
Likely that was the reason for the original Serial lookup in lstape.
As can be seen in the example, at least the HBA device driver string can
contain whitespace and breaks the field numbers with tokenized parsing.
We want to match column 5 (SCSI) but above we would match against the
string 'SCSI' as part of "Virtio SCSI HBA" instead of e.g. '0:0:0:0'.
The following works currently knowing that the last two columns do not
contain white space. But it can also fail if the value of field
'HBA' does not fit into the left-adjusted columns so there is no white
space between columns 'HBA' and 'SCSI' making them collapse:
awk '$(NF-1) == "'$SCSI_ID'" { print $1 }' /proc/scsi/$DEV_NAME
Grep for the SCSI device name as word (to skip names with same substring,
such as 0:0:1:1 also matching 0:0:1:10) and cut the first field 'Number'.
If there is no SCSI column at all (and no SCSI LLDD or other column with a
name accidentally matching an existing SCSI device name), we get no match
and better bail out with the initialized "N/A" for the lstape column
"Device". If the SCSI column exists, the SCSI device names are unique and
we always get at most one match.
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
When zfcpdump is built you get a compile warning
zfcpdump.c: In function ‘init_sig’:
zfcpdump.c:307:24: warning: cast between incompatible function types from ‘void (* (*)(int, siginfo_t *, void *))(int)’ {aka ‘void (* (*)(int, struct <anonymous> *, void *))(int)’} to ‘void (*)(int)’ [-Wcast-function-type]
g.sigact.sa_handler = (__sighandler_t)dump_sig_handler;
Furthermore the man pages for sigaction says
$man 2 sigaction
[...]
If SA_SIGINFO is specified in sa_flags, then sa_sigaction (instead
of sa_handler) specifies the signal-handling function for signum.
This function receives three arguments, as described below.
[...]
Because SA_SIGINFO is set, using sa_handler at all is wrong in this case.
Fix this by giving dump_sig_handler the correct return type and assign it
to sa_sigaction.
Signed-off-by: Philipp Rudo <prudo@linux.ibm.com>
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The zfcpdump kernel is built without module support. Furthermore the initrd
doesn't contain modprobe. So trying to load modules using modprobe in
zfcpdump userspace doesn't really make sense.
Signed-off-by: Philipp Rudo <prudo@linux.ibm.com>
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Since version 198 (Feb 2013) systemd contains kernel-install, a script
managing kernel installs. This script allows execution of drop-in scripts
for customization. Add such a drop-in script to s390-tools to handle the
installation of zfcpdump kernels.
It's main purpose is to manage a link to the latest installed zfcpudump
kernel at ZFCPDUMP_IMAGE, where zipl expects to find the image to install
for a SCSI dumper.
The script supports two installation modes. One recommended by the
BootLoaderSpecs [1] to /boot/<machine-id>/<kernel-version> directories and
one directly to /boot. In the second case files are renamed during
installation to <original-name>-<kernel-version> to guarantee unique names.
Because the zfcpdump kernel is so special make the script stand-alone and
prevent any other script from being executed (exit 77) when a zfcpdump is
installed. Especially avoid functionality like creating an initrd (already
provided by s390-tools) or creating a boot entry (the zfcpdump kernel
should not be used for any other purpose than dumping).
The script requires systemd >= 203.
[1] https://www.freedesktop.org/wiki/Specifications/BootLoaderSpec/
Signed-off-by: Philipp Rudo <prudo@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
In the zipl Makefile macros are defined with the sole purpose to define
other macros in zipl.h. Remove this unnecessary indirection.
Signed-off-by: Philipp Rudo <prudo@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The file system dumper no longer exists. So there is no need in keeping
'PART' to distinguish between the file system and the partition dumper.
Adjust the macro name to the usage in zipl by removing 'PART'.
While at it also adjust the file names the macros stand for.
Signed-off-by: Philipp Rudo <prudo@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The macro names are a mixture of the original file system dumper (FSDUMP)
and its extension to cut the file system and write directly to a partition
(PART). The original dumper no longer exists and today the feature is
called zfcpdump. Prevent confusion by renaming the macros to fit todays
usage.
Signed-off-by: Philipp Rudo <prudo@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Allow to specify a volume-type for a key. This applies to all
associated volumes. The volume type can be either 'plain' or
'luks2'. New keys created will default to 'luks2', but existing
keys that do not have a volume-type property default to 'plain'
for compatibility reasons.
The volume type 'luks2' is only available when the define
HAVE_LUKS2_SUPPORT is set in the makefile. This is set only
when libcryptsetup version 2.0.3 or newer is available
at build time. If the define is not set, the volume-type
option is not available to the user, and the volume-type of
a key defaults to 'plain'.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Store a verification pattern in the properties file along
with the secure key. The verification pattern allows to identify
the inner key even when the secure key is no longer valid.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The zkey-cryptsetup tool is used to validate and re-encipher
secure AES volume keys of volumes encrypted with LUKS2 and
the paes cipher.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The IPAPPEND option in the pxelinux config file can be used
to pass information about the boot interface to the booted
Linux kernel.
The support for this option was missing and could lead to
installation failures, e.g. using kickstart.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Client architecture aware DHCP configurations may send a
bootfile for the wrong architecture, if the DHCP request
doesn't include the client architecture identifier 0x001f.
Further, the DHCP reply may include the pxepathprefix option,
which points to the base directory to use for TFT requests.
If the value is not honored by the client, the wrong
configuration file, kernel, etc. could be loaded.
Both issues are fixed by this commit.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Compressed kernel modules (filename *.ko.xz) would not be included
since the script was looking for files with .ko suffix only.
This can result in a pxelinux.0 image that can't access the
network, which is not good for a network boot loader...
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The output of /proc/<pid>/stat will show the process name in parentheses.
The parsing code in read_stat() tries to filter out the parentheses, which
will go wrong when the process name itself also contains parentheses, e.g.
in an output like this: "2421 ((sd-pam)) S 2420 2420 2420 ..."
In this case, the first closing parentheses will be taken as end marker,
and the sscanf() on the remaining string will silently fail, leaving its
values in uninitialized state and producing wrong data.
Fix this by using strrchr() instead of strchr() to find the last closing
parentheses. Also add return value checking for sscanf() and initialize the
values to 0.
Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
mk-pxelinux-ramfs, mod_fsstatd|procd.service, zfcpdump all use
/sbin/modprobe path. Adjust zdev to use that path as well. This works
universally on both usr-merge systems (e.g. Debian/Ubuntu with
usrmerge package installed), and split-usr systems alike
(Debian/Ubuntu current stable releases default).
Closes: #31
Link: https://bugs.launchpad.net/ubuntu/+source/s390-tools/+bug/1777600
Signed-off-by: Dimitri John Ledkov <xnox@ubuntu.com>
Acked-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
When a volume or APQN association is made while generating or
importing a key, and a duplicate association is detected, then
this may leave the key in an inconsistent state.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
When a zkey generate or change command is used to associate one
or multiple APQNs the command succeeds, but no key is generated
and no APQNs are associated, because the return code returned by
_keystore_apqn_check() is wrong.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The APQN check routine as well as the properties helper functions
do not free all memory that they allocated.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add a zipl-switch-to-blscfg script that can be used to switch the zipl
configuration in a system to use the BootLoaderSpec (BLS) config files
to define the IPL sections instead of having them defined in zipl.conf.
Closes: #28
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The BootLoaderSpec (BLS) defines a file format for boot configurations,
so bootloaders can parse these files and create their boot menu entries
by using the information provided by them [0].
This allow to configure the boot items as drop-in files in a directory
instead of having to parse and modify a bootloader configuration file.
If the /boot/loader/entries exists and there are BLS files there, then
these are parsed and configuration sections are added without the need
to have these in a zipl.conf file.
A different BLS directory can be specified from the command line using
the --blsdir option.
[0]: https://www.freedesktop.org/wiki/Specifications/BootLoaderSpec/
GitHub-ID: #28
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The function returns 0 on success and a negative number on error but is
useful to know how many tokens were allocated. This will be used by the
BLS parsing code to determine if needs to allocate mor tokens or not to
parse the BLS fragments.
GitHub-ID: #28
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
lsluns lists nothing and returns with return code 0 if no adapter (FCP
device) or target port exists in sysfs. This can be confusing for the user.
Print a message if no adapter exists. Print a message if no port exists on
any adapter.
Reported-by: Thorsten Diehl <thorsten.diehl@de.ibm.com>
Suggested-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Jens Remus <jremus@linux.ibm.com>
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Changing the cmb_enable attribute of a CCW device can cause a blocked
chzdev process or udev rule. This problem occurs when the device is
offline, cmb_enable is 0, and chzdev is used to set cmb_enable=1 and
online=1 at the same time.
The following call will block:
chzdev 190d -a cmb_enable=1 online=1
The following call will generate a udev rule that will block subsequent
calls to 'udevadm settle':
chzdev 190d -p online=1 cmb_enable=1
Fix this by ensuring that cmb_enable is only set when the CCW device
is not online.
Reported-by: André Wild <wild@linux.vnet.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Enable user to specify that a device should be configured early, that is
during the initial RAM-disk boot phase. This may be necessary, e.g. to
override auto-configuration for a device which is also applied during
that boot phase. It may also be used to manually specify devices that
are required to access the root file system, such as networking devices.
Users can mark devices as requiring early configuration by specifying
a value of 1 for the newly added internal attribute zdev:early:
# chzdev dasd-eckd 0.0.1234 -p zdev:early=1
This can be changed back by removing the attribute setting, or by
setting the attribute value to 0:
# chzdev dasd-eckd 0.0.1234 -p -r zdev:early
or
# chzdev dasd-eckd 0.0.1234 -p zdev:early=0
Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This change adds base infrastructure for implementing internal device
attributes. In the context of the zdev tools, an internal device
attribute is a new type of device attribute with the following
characteristics:
- Can be set and removed like normal device attributes
- Affects zdev-internal handling only
- Does not correspond to an actual device attribute, that is
it has no representation in SysFS
- Can not be set in the active configuration
- Name starts with "zdev:" to prevent conflicts with actual
device attributes
Values for internal device attributes are stored in udev rules alongside
the normal persistent configuration of a device. They are encoded as
udev environment variables. Note that they have no further effect on
udev processing.
Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add initramfs-tools scripts that apply firmware-provided I/O
configuration data as auto-configuration during boot. This way, all I/O
devices configured by DPM are automatically brought online without
further user interaction.
This mechanism is active by default. It can be deactivated by specifying
the following parameter on the kernel command line:
rd.zdev=no-auto
Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add a dracut hook that applies firmware-provided I/O configuration data
as auto-configuration during boot. This way, all I/O devices configured
by DPM are automatically brought online without further user
interaction.
This mechanism is active by default. It can be deactivated by specifying
the following parameter on the kernel command line:
rd.zdev=no-auto
Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Auto-configuration is the name of a new configuration target that is
supported by chzdev and lszdev besides the existing active and
persistent configuration targets. Directives created in this new
configuration are stored as udev rules in the /run/udev/rules.d
directory.
Auto-configuration directives are only in effect if there are no
directives for the same device in the user-provided persistent
configuration. This allows users to override auto-configuration
directives if necessary.
Due to the volatile nature of the /run directory, auto-configuration
directives are cleared on reboot. Therefore mechanisms that generate
auto-configuration directives must recreate them on every boot.
The lszdev tool displays auto-configuration data both in list view
as well as in detail view. Users can specify the new option --auto-conf
to only show data from this configuration target.
Mechanisms that generate automated configuration directives can use
chzdev together with the --auto-conf option to create the corresponding
udev rules.
Note: This change does not include a mechanism that generates
auto-configuration directives.
Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Change chzdev's udev rule generation from the previous approach of
combining all zfcp-lun udev rules associated with an FCP device into a
single file to storing zfcp-lun udev rules in one file per zfcp-lun.
This is done to enable per-device udev rule masking.
With udev rule masking, if a udev rule file by the same name exists in
both /etc and /run, the udev daemon will only consider the rules found
in /etc.
The auto-configuration feature will make use of per-device udev rule
masking to introduce a new class of configuration data (stored in /run)
that is only active if no user-provided configuration data (in /etc)
exists.
In addition, change chzdev to allow the regeneration of udev rules by
using the --force command line like in the following example:
# chzdev zfcp-lun --configured --enable --persistent --force
This can be used to convert all existing zfcp-lun udev rules from the
old format to the new one.
Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
There are some situations where running "udevadm settle" can result in
a deadlock, such as in the early stages of initial RAM-disk processing.
Introduce a new command-line option --no-settle that can be used to
suppress calling "udevadm settle" to allow chzdev to be run in such
situations.
Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add support for reading firmware-provided I/O configuration data files.
Such configuration files are generated by the Dynamic Partition Manager
and made available via a kernel interface for consumption by Linux.
To read a firmware configuration file, use the existing --import option:
# chzdev --import /sys/firmware/sclp_sd/config/data
This will apply all I/O configuration data found in the specified file
to the persistent configuration.
Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Apply some changes to existing functions and data structures to simplify
the firmware configuration file support implementation.
- Make qeth and dasd subtype objects non-static
- Change the existing helper functions for reading file contents into
memory to also support binary functions
- Move some configuration file import functions to make them available
for use in other source files
Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The udev rule for SCSI devices is still using the WAIT_FOR keyword,
which was used to make sure that a file does in fact exist before any
rule is applied. That keyword, however, was removed with systemd-220 and
is therefore no longer valid, which in turn leads to errors on newer
systems.
Use the TEST keyword instead to check the existence of a file before we
apply any rules.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Create the default keystore directory '/etc/zkey/repository'
and the user group 'zkeyadm' during make install.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add new commands to the zkey utility to store secure AES keys in
the secure key repository provided by the keystore implementation
introduced in the previous commit.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add a keystore implementation that stores secure AES keys in a
key repository, located in a directory, e.g. '/etc/zkey/repository'.
The keystore allows you to generate, validate, re-encipher, modify,
list, delete, etc secure keys.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
To reduce the size of the zkey.c source file, all routines that
deal with secure keys are moved to a new source file pkey.c.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Comma separated strings are used in property values to store
multiple values in one property. These helper functions allow to
work with such comma separated strings.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The integrity support for the properties file routines use
SHA-256 to build a hash of the keys and values of a property file.
The codes uses the EVP_DigestInit_ex, EVP_DigestUpdate, and
EVP_DigestFinal from the libcrypto library (OpenSSL).
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
In preparation for a new feature, introduce property file
handling routines. A property file stores key value pairs
in a text file. Optionally a hash of all keys and values
contained in the properties file can be generated to
ensure integrity of the properties file and to detect
manual modifications.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add 'Dump file size' field for zgetdump -i output to show the actual size
of dump file in s390 extended format on disk in megabytes.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add verbose option for zgetdump to display the detailed layout of memory
map when printing dump info for s390_ext or ELF dump format.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Adjust ELF formatted dump processing by zgetdump tool in order to handle
so-called zero loads using zero memory chunks introduced with s390
extended dump format.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Update zgetdump tool to process dumps of the new s390 extended format.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Update 'zgetdump -d' to process the new DASD dump tool installed (single
volume or multi-volume).
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Update df_s390_dumper structure and dumper reading functions to read
certain dumper fields instead of the entire dump tool.
Update other s390 dump common functions in preparation for the new dumper
and the new s390 extended dump format.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Adjust progress_print() function to print dump progress message based on
the time interval thus printing the message with a regular rate.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Update zipl DASD standalone dumpers for single-volume, multi-volume and FBA
to drop the sets of zero pages when dumping memory to disk. Thus, all
continuous sets of zero-megabytes in the memory are dropped during the dump
stage.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Old implementation was using Test Protection (TPROT) instruction to
validate the memory page. Given that it is a rather slow instruction and
the fact that we only need to validate the read-access for a page, we can
use simple Load or Insert Character instruction to test that.
The new version of page_is_valid() without a TPROT is introduced.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.vnet.ibm.com>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The program check handler has a bug in calculating the address of the target
to jump to. Furthermore the use of relative addresses in the exception table
can lead to situations where the (calculated) fault is not unique. Storing
the absolute address of the fault and target in the exception table solves
both problems.
This patch is intended to:
- Modify exception table to store the absolute address of 'fault' and
'target' points
- Adjust program check handler function pgm_check_handler_fn() accordingly
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.vnet.ibm.com>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
chreipl could only be used as root (effective userid 0), which is
explicitly checked upon invocation.
"access" call is a wrong method to check super user read/write access
for sysfs files, because it is simply always returns 0 (success), despite
actual sysfs file permissions or underlying sysfs file callbacks setup.
The only guaranteed way of checking sysfs file super user access is an
actual open call with the corresponding access mode.
The problem is that chreipl always tries to update some sysfs attributes
even through they are not specified as command line arguments. Together
with a broken sysfs file access checks this leads to inability to use
the tool, when some sysfs attributes are read-only (which is the case
on older systems where diag308 set does not work).
$ chreipl ccw -d 0.0.ec5a
chreipl: Could not open "reipl/ccw/parm" (Permission denied)
The change fixes access checks, which are in place to handle "diag308
set does not work" case (presence of read-only sysfs attributes).
Also replaces R_OK with F_OK in "set_target_type_auto" to underline that
only file presence is checked, not an actual read access.
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Make write_str_errno return errno in all error cases, so that it would
be usable in scenarious where open call could fail and we just want to
get an errno, not to exit.
This function is currently only used by chshut in a context where
such a change wouldn't hurt debug ability.
159 if (write_str_errno(argv[2], path))
160 ERR_EXIT_ERRNO("Could not set \"%s\"", path);
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
kdump reipl implementation relies on os_info kernel structure
residing in old memory being dumped. os_info contains reipl block, which
is used (if valid) by the kdump kernel for reipl parameters.
The problem is that the reipl block and its checksum inside
os_info is updated only when /sys/firmware/reipl/reipl_type is
written. This sets an offset of a reipl block for "reipl_type" and
re-calculates reipl block checksum. Any further alteration of values
under /sys/firmware/reipl/{reipl_type}/ without subsequent write to
/sys/firmware/reipl/reipl_type lead to incorrect os_info reipl block
checksum. In such a case kdump kernel ignores it and reboots using
default logic.
This change makes sure that all fcp values are written before
reipl_type, to avoid potential problem with incorrect checksum.
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
When dump is not complete or dump memory limit is set, zgetdump might end up
with the Segfault on reading Vector Registers. That might take place when
the Vector Registers save area is beyond the dump memory limit.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.vnet.ibm.com>
Reviewed-by: Philipp Rudo <prudo@linux.vnet.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The short descriptions for a counter in the extender counter
set should be identical for all models.
This patch fixes minor differences.
Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
double free or corruption (out)
Program received signal SIGABRT, Aborted.
0x000003fffdd40404 in raise () from /lib64/libc.so.6
(gdb) bt
#0 0x000003fffdd40404 in raise () from /lib64/libc.so.6
#1 0x000003fffdd41ec2 in abort () from /lib64/libc.so.6
#2 0x000003fffdd88d8e in __libc_message () from /lib64/libc.so.6
#3 0x000003fffdd905c8 in malloc_printerr () from /lib64/libc.so.6
#4 0x000003fffdd98dfa in free () from /lib64/libc.so.6
#5 0x0000000001005994 in util_ptr_vec_free (count=<optimized out>, ptr_vec=0x101de90) at ../include/lib/util_base.h:46
#6 util_scandir_free (de_vec=0x101de90, count=<optimized out>) at util_scandir.c:174
#7 0x00000000010043ce in print_defunct_devices (rec=rec@entry=0x10114f0,
path=path@entry=0x101cc80 "/sys/devices/css0/defunct") at lscss.c:678
#8 0x0000000001004cfe in print_subchannels_of_type (type_requested=type_requested@entry=SUBCHANNEL_TYPE_IO,
rec=rec@entry=0x10114f0) at lscss.c:726
#9 0x0000000001003888 in cmd_lscss () at lscss.c:761
#10 main (argc=<optimized out>, argv=<optimized out>) at lscss.c:932
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The cpumf_helper.in is called to parse counter definition
files stored in /usr/share/s390-tools/cpumf directory and
returns perl references to be examined by other perl tools
such as lsctrdef.
cpumf_helper.in expects several keywords in the counter
definition files, one is 'shortdesc' which contains
a short description of the purpose of the counter.
However this short description not is stored in the hash
field shortdesc keyed by counter number 'ctr' because the
wrong key is used.
Output before:
{
'64' => {
'desc' => 'Total number of the PRNG functions issued by the CPU',
'name' => 'PRNG_FUNCTIONS',
'set' => 8
},
'65' => {
'desc' => 'Total number of CPU cycles when the DEA/AES coprocessor is busy performing PRNG functions issued by the CPU',
'name' => 'PRNG_CYCLES',
'set' => 8
},
....
'ctr' => { <-------- WRONG
'shortdesc' => 'AES Blocked Cycles'
}
}
Output with this patch:
{
'64' => {
'desc' => 'Total number of the PRNG functions issued by the CPU',
'name' => 'PRNG_FUNCTIONS',
'set' => 8,
'shortdesc' => 'PRNG Functions'
},
'65' => {
'desc' => 'Total number of CPU cycles when the DEA/AES coprocessor is busy performing PRNG functions issued by the CPU',
'name' => 'PRNG_CYCLES',
'set' => 8,
'shortdesc' => 'PRNG Cycles'
},
...
}
Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Use the new libvmcp.a to send commands to z/VM CP.
The error messages remain unchanged.
Local header file vmcp.h now only contains variable definitions
and some defines used by vmcp.c. Move them to the source file
and remove the now empty header file.
Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.vnet.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This patch prevents code duplication in vmcp related programs.
Some applications such as vmur, vmcp, and lsqeth
use z/VM CP commands to query information. Each program
uses its own defines and code.
Supply a library and common header file to use common code.
Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.vnet.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Fixed typo and added one sentence to explain more details
about online switching of queue devices.
Signed-off-by: Harald Freudenberger <freude@linux.vnet.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This patch
- moves function util_strstrip to libutil/util_libc.c and deletes the
extra files util_strstip.[ch]
- adds doxygen comments for util_strstrip()
- provides an example on how to use util_strstrip().
Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Fix some warnings found by sparse.
Declare one function static and change static variables to defines.
Signed-off-by: Stefan Haberland <sth@linux.vnet.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Remove unused include to fix an error reported by make C=1.
CHECK zipl/src/zipl_helper.device-mapper.o
../../include/lib/dasd_base.h:159:20: error: redefinition of struct hd_geometry
../../common.mak:234: recipe for target 'zipl_helper.device-mapper.o' failed
make: *** [zipl_helper.device-mapper.o] Error 1
The structure hd_geometry is defined in dasd_base.h.
Signed-off-by: Stefan Haberland <sth@linux.vnet.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
hmcdrvfs will ignore files with a link count >= 1000, due to an inconsistency
in the input data. The parsing code relies on having spaces between the
different fields in its input data. When a file has a link count >= 1000,
there will be no space, and the "link count" field will be placed directly
after the previous "mode" field. This will confuse the parser, and all such
files will not be accesible.
The "mode" field will never contain digits, so in order to fix this issue,
the parser can recognize the "link count" field by the presence of a digit.
Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Function strstrip strips leading and trailung
spaces from a given string.
During review it was decided to move this function
to the libutil library to make it available for other tools.
Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
errx(EXIT_FAILURE,"Memory allocation error for CP response processing");
free(buf);
free(cp.response);
}
/*
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
