The file pointer in the functions is_online() and cpu_is_configured() is
only freed in the good case. Make sure it is always freed.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
bootmap.c: In function ‘check_secure_boot_support’:
bootmap.c:131:2: warning: ignoring return value of ‘fscanf’, declared
with attribute warn_unused_result [-Wunused-result]
fscanf(fp, "%d", &val);
^~~~~~~~~~~~~~~~~~~~~~
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
zpcictl.c: In function ‘sysfs_read_value’:
zpcictl.c:154:2: warning: ignoring return value of ‘fscanf’, declared with
attribute warn_unused_result [-Wunused-result]
fscanf(fp, "%x", &val);
^~~~~~~~~~~~~~~~~~~~~~
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add option --no-apqn-check to the generate, import, change, and
validate commands to disable checking of the specified APQNs.
With this option a currently non-existing APQN can be associated
with a key. This is useful to associate APQNs that exist only on
other systems, such as disaster recovery systems, but not on the
current system. When generating keys, at least one of the specified
APQNs must be available to generate the key.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Function get_payload_records() reading from disk, blindly adds payload
record (junks) to a list in a 2-stage hierarchical hash keyed with
request ID and PAY area.
On adapter offline/online, zfcp resets the request ID to re-start with 1.
Hence it's not a unique foreign key in the lifetime of the PAY area.
The last payload record (junks) read for the same request ID and PAY area
is the one printed as named PAY field in the tool output.
This is not necessarily the chronologically last record due to PAY area
wrapping.
With this workaround, we:
* warn on reading PAY records if ambiguous entries occurred,
* print additional PAY timestamps which the user can compare
with the actual trace record timestamps to determine if they are close
enough to indicate a match.
We only found this by accident because we kept "short" "payload" being a
built-in part of some actual trace record types in areas HBA, SAN, SCSI.
For above cases, the full PAYload did not match the
built-in "short" "payload".
While at it, also add a comment that PAY output can also be wrong
in another case when junks of multi-part PAY records are missing due
to PAY area wrapping.
Below is an abbreviated example output with this workaround:
Loading trace records ...(this might take a while)
Warning: Ambiguous PAYload records. reqid:0000000000000037 area:san_res
...
Timestamp : 2017-07-07-18:01:34:574827
Area : SAN
...
Tag : fssct_1
Request ID : 0x0000000000000037
Destination ID : 0x00fffffc
SAN req short : 01000000 fc020000 01720ffc 00000000
00000008
SAN req length : 20
Timestamp : 2017-07-07-18:01:34:619310 ------------------+
Area : SAN |
... |
Tag : fsscth2 |
Request ID : 0x0000000000000037 |
Destination ID : 0x00fffffc |
SAN resp short : 01000000 fc020000 80020000 00000000 |
00671a07 00000000 c05076ff d6801850 |
00671a7e 00000000 c05076ff d6801968 |
SAN resp length: 16384 |
Payload time : 2017-07-07-18:16:17:165708 <== does not match
San resp info : 01000000 fc020000 80020000 00000000 <== wrong
4a49424d 20202020 20323936 34202020 <== wrong
20202020 20202020 20303230 30303030 <== wrong
30303745 43383720 20504348 49443a20 <== wrong
30313938 204e5049 5620556c 7049643a <== wrong
20303536 30303330 30202020 00000000 <== wrong
00000000 00000000 00000000 00000000 <== wrong
... <== wrong
...
Timestamp : 2017-07-07-18:16:17:165713
Area : SAN
...
Tag : fsscth2
Request ID : 0x0000000000000037 <== same reqid & pay "area"
Destination ID : 0x00fffffc
SAN resp short : 01000000 fc020000 80020000 00000000
4a49424d 20202020 20323936 34202020
20202020 20202020 20303230 30303030
SAN resp length: 273
Payload time : 2017-07-07-18:16:17:165708 <== 2nd & last, match
close to Timestamp
San resp info : 01000000 fc020000 80020000 00000000
4a49424d 20202020 20323936 34202020
20202020 20202020 20303230 30303030
30303745 43383720 20504348 49443a20
30313938 204e5049 5620556c 7049643a
20303536 30303330 30202020 00000000
00000000 00000000 00000000 00000000
...
Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reading DASD specific sysfs attributes should be collected in one
library. Move get_host_access_count() to libdasd/dasd_sys.
Remove the old implementation and update any user accordingly.
Also, fix the build order for zdsfs.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Use the newer and more robust libutil provided function
util_sys_get_dev_addr() to identify a device address for any former user
of u2s_getbusid().
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Many tools need to identify the device address of a given device. So
far, either the tool had its own implementation, or u2s_getbusid() was
used. Though, u2s_getbusid() was mainly designed for and used by the
DASD tools.
Introduce util_sys with a first function util_sys_get_dev_addr() which
provides a more universal way to identify the device address which is
not limited to one particular device type. The device address represents
either a busid (e.g. DASD), slot address (NVMe), H:C:T:L tuple (SCSI),
or other id types associated with a device.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
dasdview and libdasd deal with DASD bus ids and should use a definition
for the size. libu2s already provides a definition, which is used by
dasdview. However, the size of 32 is a bit much and the definition
should be part of libdasd.
Including the terminating null byte ('\0') and considering a DASD bus id
length of 8 characters (e.g. 0.0.4711), this leads to a size of 9.
Provide such a definition via libdasd and update any user.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Don't rely on rather arbitrary values for the string buffer size of
different sysfs paths. Instead use util_path_sysfs(), which allocates
the exact amount of memory necessary for a certain path string.
As these path strings are dynamically constructed, potential buffer
overflows can hereby be avoided and make the library functions more
robust.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add zipl and zipl.conf man page updates.
The zipl man page will look like:
-S <SWITCH> or --secure <SWITCH>
Control the zIPL secure boot support. <SWITCH> can take one of three values:
auto (default)
Write signatures if available and supported by the system.
1
Signatures are written independent of support indicated by the local
system. Also missing signatures for stage 3 and kernel IPL files
will result in an error.
0
No signatures will be written.
The zipl.conf man page will look like:
secure = auto/1/0 (configuration only)
Configuration section:
Control the zIPL secure boot support. Set this option to one of the following:
- auto: Write signatures if available and supported by the system.
- 1: Signatures are written independent of support indicated by the local system.
Also missing signatures for stage 3 and kernel IPL files will result in an error.
- 0: No signatures will be written.
The default value for 'secure' is auto.
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Acked-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
To ensure that only verified code is executed the stage 3 loader has
to check if the load psw points to an address that has previously been
verified by the machine loader.
If secure boot is enabled the IPL process will only continue if the
verification was successful.
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Acked-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The firmware needs to know which memory locations are used by
the stage 3 loader so that it can allocate its own memory.
To indicate the usage of the heap and stack area of the stage 3 loader
add a dummy component to block this memory area for the firmware.
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Acked-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The stage 3 loader size has to be a multiple of the filesystem
blocksize so that the signature maps with the later in memory
stage 3 loader. The lowest common blocksize is 4k so the image
is padded to a 4k boundary.
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Acked-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add a command line option and configuration section keyword to control
the zIPL secure boot support. This option is named "secure" and can take
one of three values:
auto (default)
Write signatures if available and supported by the system.
1
Signatures are written independent of support indicated by the local
system. Also missing signatures for stage 3 and kernel IPL files
will result in an error.
0
No signatures will be written.
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add support for parsing IPL file signatures as produced by the Linux
kernel's sign-file tool. When preparing a disk for IPL, the signatures
will be added as separate data components that can be used by the Secure
Boot firmware feature to validate the integrity of the IPL files.
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Change the fixed component entry text array to a more dynamic approach
to allow easier extension and make the order changeable.
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The first component that gets control after IPL is the zIPL-provided
stage 3 boot loader. This boot loader is based on a binary image linked
into the zIPL executable. When preparing a disk for IPL, zIPL updates
runtime parameters in the boot loader image and writes the resulting
data to disk.
To support the Secure Boot firmware feature, the stage 3 code must be
signed, and can therefore no longer contain variable parameter portions.
Also the boot loader image should be accessible as a separate file to
enable the use of external programs for creating the signature.
This patch moves the stage 3 boot loader code to an external file
location and splits out the parameter portion into a separate, unsigned
on-disk component.
The new memory layout of the stage 3 loader during its execution looks
as follows:
* 0x0000-0x1fff Lowcore
* 0x2000-0x5fff Memory allocation (heap)
* 0x7000-0x8fff free
* 0x9000-0x9fff Stage3 parameter
* 0xa000-0xcfff Stage3 code
* 0xd000-0xefff Section: bss, rodata, data
* 0xf000-0xffff Stack
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The binary Linux kernel image is built to be loaded to memory address
0x0 but the first 64 kbyte contain an IPL header that is not used for
disk IPL. zIPL strips away this IPL header when writing IPL records to
disk, loads the remaining data to memory address 0x10000 and uses the
memory area below that for its own boot loader code.
The Secure Boot firmware feature checks the integrity of an installed
image during IPL using a checksum that was generated for the full image.
Since the checksum becomes invalid if the IPL header is removed, zIPL
must be changed to write the full image to disk.
This patch modifies the zIPL logic to no longer strip away the IPL
header. Instead the full image is loaded to a higher memory address and
relocated by the stage 3 boot loader code to its final location.
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
When a 'zkey change' command is used to change (i.e. set) the volume
association of a key, and the new volume association contains a volume
that is already assigned to the key to be changed, the command fails
with an error that the volume is already associated to the key.
This commit fixes the problems and allows to set such a volume
association. When setting a new association the current association of
the key to be changed is of no relevance, since the set operation
replaces the current association with the new association.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
s390-tools-1.9.0 introduced a new way of recognizing of multipath
device paths with using of sed command invocation in ziomon script.
With this new way of recognizing, if there are paths, related to
multipath device, with SCSI host ID longer, than one digit,
ziomon incorrectly parses the multipath -l command output. It
erroneously cuts off all but the least significant digit of the
SCSI host ID (H) of paths in H:B:T:L format (Host:Bus:Target:Lun).
This leads to passing of hosts (-a) and paths (-l) with
non-existing SCSI host ID to ziomon_util. In turn ziomon_util
cannot recognize hosts with non-existing SCSI host ID and issues
an error.
Also, wrong sed command invocation could lead to receiving of
duplicate LUNs by ziomon after parsing of multipath -l command
output. Then ziomon excludes duplicates from WRP_LUNS, which
leads to mismatch between number of LUNs and number of detected
block devices and issues ziomon script error, without starting
ziomon_util and without writing to specified log file.
The regular expression to match a path in H:B:T:L format started
with a greedy ".*", which erroneously consumed parts of the SCSI
host ID (H). This patch replaces the greedy ".*" by "[^0-9]*",
so that sed command does not consume parts of the SCSI host ID
any more.
Test example with unique SCSI host IDs:
$ multipath -l
...
mpathc (36005076307ffc5e300000000000083f5) dm-2 IBM ,2107900
size=20G features='1 queue_if_no_path' hwhandler='0' wp=rw
`-+- policy='service-time 0' prio=0 status=active
|- 10:0:0:1089814659 sdb 8:16 active undef running
`- 11:0:0:1089814659 sdf 8:80 active undef running
...
Behavior without fix applied:
$ ziomon -d 5 -o log /dev/mapper/mpathc
Check devices...done
NOTE: No size limit specified, run without a limit.
Estimated maximum disk space required for log data: approx. <1 MBytes
Collecting configuration data...done
Start data collection processes...ziomon_util: Path does not exist: /sys/class/scsi_host/host0/utilization - correct kernel version?
ziomon_util: Path does not exist: /sys/class/scsi_host/host0/utilization - correct kernel version?
ziomon_util: Path does not exist: /sys/class/scsi_host/host0/queue_full - correct kernel version?
ziomon_util: Path does not exist: /sys/class/scsi_host/host1/utilization - correct kernel version?
ziomon_util: Path does not exist: /sys/class/scsi_host/host1/queue_full - correct kernel version?
failed
ziomon: Failed to determine ziomon_util pid
Shutting down
Shutting down blktrace process
Shutting down blkiomon process
Shutting down ziomon_zfcpdd process
blkiomon: terminated by signal
Shutting down data manager
User can see more information, when using ziomon with -V option:
...
=== WRP_LUNS : 0:0:0:1089814659 1:0:0:1089814659
=== WRP_HOST_ADAPTERS: host0 host1
...
=== starting ziomon_util: ziomon_util -V -a 0 -a 1 -l 0:0:0:1089814659 -l 1:0:0:1089814659 ...
...
User can also see this type of errors, while using
ziorep_traffic or ziorep_utilization tools:
$ ziorep_traffic -t1 log.log
Extracting config data...done
ziorep_traffic: Could not retrieve initial data - data files corrupted or broken, or the .agg file is missing.
Behavior with fix applied:
$ ziomon -d 5 -o log /dev/mapper/mpathc
Check devices...done
NOTE: No size limit specified, run without a limit.
Estimated maximum disk space required for log data: approx. <1 MBytes
Collecting configuration data...done
Start data collection processes...done
Collecting data...done
Shutting down
Shutting down data manager
User can see more information, when using ziomon with -V option:
...
=== WRP_LUNS : 10:0:0:1089814659 11:0:0:1089814659
=== WRP_HOST_ADAPTERS: host10 host11
...
=== starting ziomon_util: ziomon_util -V -a 10 -a 11 -l 10:0:0:1089814659 -l 11:0:0:1089814659 ...
...
Test example with duplicate SCSI host IDs:
$ multipath -l
...
mpathc (36005076307ffc5e300000000000083f5) dm-1 IBM ,2107900
size=20G features='1 queue_if_no_path' hwhandler='0' wp=rw
`-+- policy='service-time 0' prio=0 status=active
|- 0:0:0:1089814659 sdb 8:16 active undef running
`- 10:0:0:1089814659 sdf 8:80 active undef running
...
Behavior without fix applied:
$ ziomon -d 5 -o log /dev/mapper/mpathc
Check devices...done
ziomon: Number of LUNs does not match number of devices: 2 devices and 1 LUNs
User can see more information, when using ziomon with -V option:
...
=== #Devices total : 2
=== WRP_DEVICES : /dev/sdb /dev/sdf
=== WRP_LUNS : 0:0:0:1089814659
=== WRP_HOST_ADAPTERS: host0
...
Behavior with fix applied:
$ ziomon -d 5 -o log /dev/mapper/mpathc
Check devices...done
NOTE: No size limit specified, run without a limit.
Estimated maximum disk space required for log data: approx. <1 MBytes
Collecting configuration data...done
Start data collection processes...done
Collecting data...done
Shutting down
Shutting down data manager
User can see more information, when using ziomon with -V option:
...
=== #Devices total : 2
=== WRP_DEVICES : /dev/sdb /dev/sdf
=== WRP_LUNS : 0:0:0:1089814659 10:0:0:1089814659
=== WRP_HOST_ADAPTERS: host0 host10
...
=== starting ziomon_util: ziomon_util -V -a 0 -a 10 -l 0:0:0:1089814659 -l 10:0:0:1089814659 ...
...
Signed-off-by: Fedor Loshakov <loshakov@linux.ibm.com>
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
In case a regular directory was specified, rather than a device node,
the check if the device exists will pass. The following code paths then
assume a slot id was specified. This in turn may lead to a buffer
overflow when the device data is copied to to the zpci_device struct.
Check if the specified path is a regular directory and prevent a
possible later buffer overflow and copying wrong data respectively.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Also mark FCP devices with CHPID that is logically varied off,
e.g. after running "chchp -v 0 60".
Such FCP devices can be online, not failed, and are not defunct,
so the other existing markers do not appear.
Shows potential issues with FCP devices at one glance.
Examples:
$ lszfcp -He
0.0.1900 host0 NotAvailable
$ lszfcp -HeV
/sys/devices/css0/0.0.010d/0.0.1900 NotAvailable
/sys/class/fc_host/host0
/sys/class/scsi_host/host0
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Complements: 4036e80b26 ("lszfcp: add new output marker for non-good FCP devices (hosts)")
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The zcryptstats tool displays usage statistics of IBM Crypto Express
adapters. It obtains cryptographic performance measurement data
periodically and displays the data for each cryptographic device for
each interval. A cryptographic device can be either a card device or
a queue device (APQN).
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
I often use "systool -v -m zfcp" but that's a bit longish to type
and contains more output than just the parameters I'm interested in.
"tail /sys/module/zfcp/parameters/*" is also not so nice.
"lszfcp -Z" makes it very easy and can be combined with the other
existing output options of lszfcp.
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Since zfcp lazily allocates Scsi_Host et al. on setting an FCP device
online for the first time since the last driver core bind to zfcp
(such as zfcp kernel module load),
lszfcp has only been showing FCP devices (vHBAs) that have been online
at least once including those that have been set offline again.
This is somewhat confusing.
Also it would be nice if lszfcp could be an easier to type replacement for
"lscss -t 17032/03" to simply show all devices bound to the zfcp device
driver.
Of course those FCP devices that have never been online, won't have any
zfcp-specific attribute details, only CIO attributes from the CCW bus.
They also do not have a Scsi_Host nor fc_host.
In order not to break any scripting or expectations around lszfcp,
make the new feature depend on the extended output command line option.
Example:
$ lszfcp -He
0.0.1880 - offline
$ lszfcp -HeV
/sys/devices/css0/0.0.010b/0.0.1880 offline
-
-
$ lszfcp -Hea
0.0.1880 - offline
Bus = "ccw"
availability = "good"
cmb_enable = "0"
cutype = "1731/03"
devtype = "1732/03"
modalias = "ccw:t1731m03dt1732dm03"
online = "0"
uevent = "DRIVER=zfcp"
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Fedor Loshakov <loshakov@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
s390-tools-1.8.1 introduced a new error message.
It gave the same and thus misleading error message as if no FCP device
(vHBA) found.
In order not to break any scripting built around lszfcp output,
only print the fixed error message depending on the extended output
command line option.
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
s390-tools-1.8.0 introduced a regression skipping all FCP devices
that are currently "defunct".
Changing
$SYSFS/devices/css0/*/*/host*
to
$SYSFS/devices/css0/[0-9]*/[0-9]*/host*
was too strict as it won't match
$SYSFS/devices/css0/defunct/[0-9]*/host*
anymore.
Fix:
$SYSFS/devices/css0/[0-9d]*/[0-9]*/host*
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
s390-tools-1.8.1 introduced a regression skipping all fc_rports
with port_state != Online. While we need to skip some output parts
for a zfcp_port which does not exist anymore due to port_remove,
there are other cases with port_state != Online for which we should
not skip an fc_rport.
Such as port_state "Blocked" after a cable pull beyond host-adjacent switch
or port_state "Not Present" after dev_loss_tmo ran out.
This way the user can see the previously discovered ports,
even if they might currently not be usable for traffic.
Non-good ports are marked in the short output with suffix "NotOnline".
In order not to break scripting or expectations around lszfcp, make the new
feature depend on the extended output command line option.
Sysfs path globbing does not work for a removed zfcp_port
to obtain the FCP device bus-ID. Instead, properly walk the sysfs.
Examples with a removed zfcp_port:
$ lszfcp -Pe
0.0.50c0/0x500507680b2481fa rport-6:0-2
$ lszfcp -PeV
- (NoMoreZfcpPort:0.0.50c0/0x500507680b2481fa)
/sys/class/fc_remote_ports/rport-6:0-2
Examples with an existing zfcp_port but pulled fibre:
$ lszfcp -Pe
0.0.3c40/0x500507680b2181fb rport-7:0-4
$ lszfcp -PeV
/sys/devices/css0/defunct/0.0.3c40/0x500507680b2181fb
/sys/class/fc_remote_ports/rport-7:0-4
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Used in subsequent patches to guard their changes in order not to break
any scripting or expectations around the lszfcp output format.
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
When re-enciphering or setting LUKS2 volume keys using zkey-cryptsetup,
allow to specify the --batch-mode|-q option to suppress confirmation
questions.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
For LUKS2 volumes the cryptsetup command currently generates
'cryptsetup luksFormat' commands, but for plain mode volumes it
generates 'cryptsetup plainOpen' commands.
With the --open option it can now also generate 'cryptsetup luksOpen'
commands for opening LUKS2 volumes. With the --format option you can
limit the generated commands to only generate 'cryptsetup luksFormat'
commands for LUKS2 volumes, and skip plain mode volumes.
The default behavior (i.e. if none of the two options specified),
remains the same as before.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
When generating crypttab entries for LUKS2 volumes, allow to
specify common passphrase options like --key-file, --keyfile-offset,
--keyfile-size and --tries and pass those to the generated crypttab
entries.
Note that not all distributions support the keyfile-offset and
keyfile-size options in crypttab entries.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
For some device driver SysFS attributes, values read may not be
acceptable input values for that attribute.
An example would be the group of qeth VNICC attributes that return "n/a"
when VNICC setup is not supported, but only accept "0" and "1" as valid
values that can be written to it.
This leads to errors such as the following when data for such attributes
is imported:
# chzdev f500 --import test.conf
Importing configuration data from test.conf
QETH device 0.0.f500:0.0.f501:0.0.f502 configure failed
Error: Invalid value for qeth attribute: vnicc/flooding=n/a (*)
Acceptable values:
- Integers in the range 0 - 1
Use 'chzdev qeth --help-attribute vnicc/flooding' for more information
Note: You can use --force to override safety checks (*)
To fix this, change chzdev's --export function to skip any attribute
value that is not acceptable for that attribute.
Fixes: e831269e74 ("zdev: Add support for VNIC Characteristics")
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Remove 'hash=plain' option for plain type entries, add 'none luks'
for LUKS type entries.
Note that the format of a crypttab entry is distribution specific.
On some distributions only the first 2 fields are required, the
remaining are optional, on other distributions all 4 fields are
required. With this patch correct crypttab entries are generated
for all distributions.
Closes: https://github.com/ibm-s390-tools/s390-tools/pull/55
Fixes: https://github.com/ibm-s390-tools/s390-tools/issues/57
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
With libcryptsetup version 2.1 a new debug level was introduced
to log the JSON structures when adding key slots, digests, etc
into the LUKS2 header.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Messages from libcryptsetup for logging level CRYPT_LOG_DEBUG
do not include an EOL.
Prior to libcryptsetup version 2.1 debug messages were not printed
through the log callback, but using printf directly within
libcryptsetup. Now they are also printed through the log callback,
but without an EOL terminating the text.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
For zkey-cryptsetup commands reencipher and setkey, use the
same password-based key derivation function (PBKDF) when
creating unbound key-sots that the key slot uses, which was
unlocked through the specified passphrase. That way the
unlocked key slots created by these commands inherit the
PBKDF from the existing key slot.
This feature requires libcryptsetup version 2.1 or later.
If an older libcryptsetup version is available at compile
time, then PBKDF2 is used for newly created unbound key slots.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The output of lsof command is sometimes too long and makes it difficult
to search in runtime.out. Move the output to a separate file.
Signed-off-by: Sa Liu <saliu@de.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Running lscpumf -i as regular user causes a warning when trying to
disply sampling buffer sizes. The root cause is in the cpumf_helper
that returns "0,0" instead of a list reference "[0,0]".
This happened when running as regular user because the sampling buffer
size sysfs attribute is not readable for them.
Remove the shortcut and always return a list reference.
Signed-off-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
LUKS2 encrypted volumes use Argon2i as default password based key
derivation function (PBKDF). Argon2i is a so-called memory-hard
function. It requires a certain amount of physical memory to make
dictionary attacks more costly.
Unfortunately, when multiple encrypted volumes are unlocked
automatically during system startup via /etc/crypttab, the use of
Argon2i will most likely cause an out-of-memory error in systemd.
To avoid the out-of-memory error, use PBKDF2 instead. Because PAES
uses secure keys as volume keys, the security of the key derivation
function used to derive the key to encrypt the volume key in the LUKS
key slots is of less relevance. Thus it is safe to use a weaker key
derivation function.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
LUKS2 encrypted volumes use Argon2i as default password based key
derivation function (PBKDF). Argon2i is a so-called memory-hard
function. It requires a certain amount of physical memory to make
dictionary attacks more costly.
Unfortunately, when multiple encrypted volumes are unlocked
automatically during system startup via /etc/crypttab, the use of
Argon2i will most likely cause an out-of-memory error in systemd.
To avoid the out-of-memory error, use PBKDF2 instead. Because PAES
uses secure keys as volume keys, the security of the key derivation
function used to derive the key to encrypt the volume key in the LUKS
key slots is of less relevance. Thus it is safe to use a weaker key
derivation function.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
When a user that is in the zkeyadm group, but is not the owner
of the key file changes a key in the zkey repository, then
error "Operation not permitted" occurs. This is due to a superfluous
call to chmod on the key file. When key files are changed then the
permissions of that file are retained anyway.
Also fix a typo in the error message when chmod fails.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Enable zdsfs to access datasets that were created after zdsfs was
mounted without the need to remount zdsfs.
This is done by re-reading the VTOC with every readdir system call.
To ensure a consistent VTOC state the DASD device is reserved for
every VTOC read and released afterwards.
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Added some explanations about the columns shown with the
lszcrypt verbose output.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Show how to use util_rec_set_indent() and util_rec_print_separator()
in util_rec_example.c
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
In wide format the header is separated from the rest of the
records by a separator line. Add support to print such a
separator line also between some records.
Add function util_rec_print_separator() that prints the
separator line for wide format only. For other formats this
is a NOP.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Acked-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Functions rec_print_xxx allows to print records in
different formats. Add support to optionally indent
the output by a specific number of characters.
The indention is set using a new function util_rec_set_indent().
The default indention is zero, thus existing applications
will behave the same as before.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Acked-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The cmsfs_write function only writes a single record in line mode
and returns the number of bytes it consumed from the input buffer.
This is valid behaviour as the write system call can always return
with a partial write. But there are tools that ignore the return
value of the write and just assume that a single write call is
sufficient to write many lines aka records on the cmsfs filesystem.
Enhance the cmsfs_write function to loop until all lines from the
input buffer have been consumed.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
GCC8 shows the following compile warning:
cmsfs-fuse.c: In function ‘convert_text’:
cmsfs-fuse.c:2558:19: warning: passing argument 2 to restrict-qualified
parameter aliases with argument 4 [-Wrestrict]
rc = iconv(conv, &data_ptr, &in_count, &data_ptr, &out_count);
^~~~~~~~~ ~~~~~~~~~
Fix this by using a separate buffer for iconv. The buffer size depends on
the record format: variable-length records have a maximum length of
MAX_RECORD_LEN (plus 1 byte for linefeed), while fixed-length records
could be larger in theory. This patch takes that into account for the iconv
buffer, but the rest of the code currently cannot handle fixed-length records
larger than MAX_RECORD_LEN.
Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Commit aefc8cd3ff ("libutil/libu2s: Move strlcpy() implementation to
libutils") added a dependency to libutil. This is not necessary and
could potentially lead to parallel build errors. Remove the dependency.
Fixes: aefc8cd3ff ("libutil/libu2s: Move strlcpy() implementation to libutils")
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
There are several reasons why an operation might fail. Either the
running kernel, the PCI function itself, or the hypervisor lacks support
for a certain operation. In such cases the kernel returns either with
EIO or EOPNOTSUPP.
The corresponding warning, however, just says the file couldn't be
closed. Display a warning for EIO and EOPNOTSUPP to tell the user about
the missing support.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Make the error message when the CCA library is missing more
user friendly. Also display an URL where the CCA package
can be downloaded.
The CCA library is used for the REENCIPHER commands of
zkey and zkey-cryptsetup and must be installed separately
as part of the IBM CCA Host Libraries and Tools package.
This packages is not provided by the distributors, but must
be downloaded from an IBM web page and installed separately.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Get rid of the following GCC8 compile warning by using different buffers
for input/output:
In file included from vmdump_convert.cpp:13:
vm_dump.h: In member function ‘void VMDump::ebcAsc(char*, size_t)
const’:
vm_dump.h:145:26: warning: passing argument 2 to restrict-qualified
parameter aliases with argument 4 [-Wrestrict]
iconv(ebcdicAsciiConv, &inout, &len, &inout, &len);
^~~~~~ ~~~~~~
vm_dump.h:145:34: warning: passing argument 3 to restrict-qualified
parameter aliases with argument 5 [-Wrestrict]
iconv(ebcdicAsciiConv, &inout, &len, &inout, &len);
^~~~ ~~~~
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Get rid of the following GCC8 compile warning by using different buffers
for input/output:
qethqoat.c: In function ‘ebctoasc’:
qethqoat.c:51:30: warning: passing argument 2 to restrict-qualified
parameter aliases with argument 4 [-Wrestrict]
iconv(l_iconv_ebcdic_ascii, &inout, &len, &inout, &len);
^~~~~~ ~~~~~~
qethqoat.c:51:38: warning: passing argument 3 to restrict-qualified
parameter aliases with argument 5 [-Wrestrict]
iconv(l_iconv_ebcdic_ascii, &inout, &len, &inout, &len);
^~~~ ~~~~
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Make sure there are two different buffers passed to iconv() to get rid
of the following GCC8 compile warning:
helper.c: In function ‘ht_ebcdic_to_ascii’:
helper.c:103:30: warning: passing argument 2 to restrict-qualified
parameter aliases with argument 4 [-Wrestrict]
iconv(l_iconv_ebcdic_ascii, &inout, &len, &inout, &len);
^~~~~~ ~~~~~~
helper.c:103:38: warning: passing argument 3 to restrict-qualified
parameter aliases with argument 5 [-Wrestrict]
iconv(l_iconv_ebcdic_ascii, &inout, &len, &inout, &len);
^~~~ ~~~~
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Commit 851f685993 ("Makefile: Add dependency between libvmcp and
libutil to fix -j builds") introduced the following regression
$ make clean
CLEAN /home2/holzheu/src/s390-tools
...
CLEAN libccw
CC libutil/util_base.o
CC libutil/util_path.o
For the "clean" target the new library dependency triggers a build
of libutil.
So remove the dependency again.
To fix the parallel build issue, no longer build the examples with
"make all" and add a new target "examples" that can now be used for building
the example programs.
Fixes: 851f685993 ("Makefile: Add dependency between libvmcp and libutil to fix -j builds")
Signed-off-by: Michael Holzheu <holzheu@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Most bootloaders use the BootLoaderSpec "title" field to name the entries
in their boot menu. The zipl bootloader used the "version" field instead,
since it was wrongly assumed that the zipl boot menu didn't support names
that contained spaces, which are usually present in a BLS "title" field.
But this is not the case, names with space characters are supported by the
IPL and is just a constraint of the section heading in the zipl.conf file.
So to be consistent with all the other bootloaders, use the "title" field
also on zipl when populating the boot menu entries from BLS files.
Closes: https://github.com/ibm-s390-tools/s390-tools/pull/47
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reviewed-by: Stefan Haberland sth@linux.ibm.com
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Use util_strlcpy() to copy log data correctly and get rid of the
following GCC8 compile warning:
zpcictl.c: In function ‘sclp_issue_action’:
zpcictl.c:312:3: warning: ‘strncpy’ specified bound 4054 equals
destination size [-Wstringop-truncation]
strncpy(report.data.log_data, sdata, sizeof(report.data.log_data));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Use util_strlcpy() to copy strings correctly and get rid of the
following GCC8 compile warning:
In function ‘hmcdrv_parse_line’,
inlined from ‘hmcdrv_cache_dir’ at hmcdrvfs.c:981:11:
hmcdrvfs.c:862:4: warning: ‘strncpy’ specified bound 192 equals
destination size [-Wstringop-truncation]
strncpy(symlink, arrow + 4, HMCDRV_FUSE_MAXPATH);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
By using util_strlcpy() and correctly copying strings we can get rid of
the following GCC8 compile warnings:
In function ‘path_to_ds_name.constprop’,
inlined from ‘zdsfs_readdir’ at zdsfs.c:282:2:
zdsfs.c:78:2: warning: ‘strncpy’ specified bound 45 equals destination
size [-Wstringop-truncation]
strncpy(normds, path, size);
^~~~~~~~~~~~~~~~~~~~~~~~~~~
In function ‘path_to_ds_name.constprop’,
inlined from ‘zdsfs_open’ at zdsfs.c:339:2:
zdsfs.c:78:2: warning: ‘strncpy’ specified bound 45 equals destination
size [-Wstringop-truncation]
strncpy(normds, path, size);
^~~~~~~~~~~~~~~~~~~~~~~~~~~
In function ‘path_to_member_name.constprop’,
inlined from ‘zdsfs_open’ at zdsfs.c:372:3:
zdsfs.c:94:3: warning: ‘strncpy’ specified bound 45 equals destination
size [-Wstringop-truncation]
strncpy(normds, path, size);
^~~~~~~~~~~~~~~~~~~~~~~~~~~
In function ‘path_to_ds_name.constprop’,
inlined from ‘zdsfs_getxattr’ at zdsfs.c:527:2:
zdsfs.c:78:2: warning: ‘strncpy’ specified bound 45 equals destination
size [-Wstringop-truncation]
strncpy(normds, path, size);
^~~~~~~~~~~~~~~~~~~~~~~~~~~
In function ‘path_to_member_name.constprop’,
inlined from ‘zdsfs_getxattr’ at zdsfs.c:547:4:
zdsfs.c:94:3: warning: ‘strncpy’ specified bound 45 equals destination
size [-Wstringop-truncation]
strncpy(normds, path, size);
^~~~~~~~~~~~~~~~~~~~~~~~~~~
In function ‘path_to_ds_name.constprop’,
inlined from ‘zdsfs_getattr.part.1’ at zdsfs.c:134:2,
inlined from ‘zdsfs_getattr’:
zdsfs.c:78:2: warning: ‘strncpy’ specified bound 45 equals destination
size [-Wstringop-truncation]
strncpy(normds, path, size);
^~~~~~~~~~~~~~~~~~~~~~~~~~~
In function ‘path_to_member_name.constprop’,
inlined from ‘zdsfs_getattr.part.1’ at zdsfs.c:164:3,
inlined from ‘zdsfs_getattr’:
zdsfs.c:94:3: warning: ‘strncpy’ specified bound 45 equals destination
size [-Wstringop-truncation]
strncpy(normds, path, size);
^~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Use the more robust util_strlcpy() to copy strings instead of strncpy().
This fixes the following GCC8 compile warnings:
qethqoat.c: In function ‘main’:
qethqoat.c:616:2: warning: ‘strncpy’ specified bound 16 equals
destination size [-Wstringop-truncation]
strncpy(ifr.ifr_name, opts.ifname, IFNAMSIZ);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Make sure strings are copied correctly by using util_strlcpy().
Also, rename the NIC_{OWNER,NAME}_LEN definitions to *_SIZE to make it
more clear that the terminating null byte ('\0') is included in this
buffer size. Using *_LEN would mean only the number of characters in the
string fit in.
Furthermore, use these definitions rather than sizeof().
This fixes the following GCC8 compile warning:
nic.c: In function ‘nic_data_get’:
nic.c:58:2: warning: ‘strncpy’ specified bound 9 equals destination size
[-Wstringop-truncation]
strncpy(data.owner, argv[11], sizeof(data.owner));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
nic.c:59:2: warning: ‘strncpy’ specified bound 9 equals destination size
[-Wstringop-truncation]
strncpy(data.name, argv[12], sizeof(data.name));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Change the buffer size to what we actually need and use util_strlcpy()
to correctly copy strings.
This gets rid of the following GCC8 compile warnings:
fcp.c: In function ‘fcp_wwpn_get’:
fcp.c:44:2: warning: ‘strncpy’ output may be truncated copying 20 bytes
from a string of length 4095 [-Wstringop-truncation]
strncpy(wwpn, buf, 20);
^~~~~~~~~~~~~~~~~~~~~~
fcp.c: In function ‘fcp_lun_get’:
fcp.c:65:2: warning: ‘strncpy’ output may be truncated copying 20 bytes
from a string of length 4095 [-Wstringop-truncation]
strncpy(lun, buf, 20);
^~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Use util_asprintf() to allocate memory for the string buffers
dynamically and get rid of the following GCC8 compile warnings:
system.c: In function ‘print_fw_str’:
system.c:86:46: warning: ‘%s’ directive output may be truncated writing
up to 4095 bytes into a region of size 4082 [-Wformat-truncation=]
snprintf(path, sizeof(path), "/sys/firmware/%s", file);
^~
system.c:98:19:
read_fw_str(str, path, sizeof(str));
~~~~
system.c:86:2: note: ‘snprintf’ output between 15 and 4110 bytes into a
destination of size 4096
snprintf(path, sizeof(path), "/sys/firmware/%s", file);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cmd_chreipl.c: In function ‘set_reipl_type_helper’:
cmd_chreipl.c:316:19: warning: ‘%d’ directive writing between 1 and 11
bytes into a region of size between 0 and 4095 [-Wformat-overflow=]
sprintf(cmd, "%s %d:%d", chreipl_helper, major(dev), minor(dev));
^~
cmd_chreipl.c:316:15: note: using the range [-2147483648, 2147483647]
for directive argument
sprintf(cmd, "%s %d:%d", chreipl_helper, major(dev), minor(dev));
^~~~~~~~~~
cmd_chreipl.c:316:15: note: using the range [-2147483648, 2147483647]
for directive argument
cmd_chreipl.c:316:2: note: ‘sprintf’ output between 5 and 4120 bytes
into a destination of size 4096
sprintf(cmd, "%s %d:%d", chreipl_helper, major(dev), minor(dev));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Use util_strlcpy() to copy strings correctly and get rid of the
following GCC8 compile warnings:
main.c: In function ‘main’:
main.c:34:2: warning: ‘strncpy’ specified bound 256 equals destination
size [-Wstringop-truncation]
strncpy(g.prog_name, argv[0], sizeof(g.prog_name));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In function ‘set_bootprog’,
inlined from ‘parse_chreipl_options’ at cmd_chreipl.c:510:4:
cmd_chreipl.c:185:2: warning: ‘strncpy’ specified bound 11 equals
destination size [-Wstringop-truncation]
strncpy(l.bootprog, bootprog, sizeof(l.bootprog));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cmd_chreipl.c: In function ‘set_reipl_type’:
cmd_chreipl.c:297:2: warning: ‘strncpy’ specified bound 15 equals
destination size [-Wstringop-tr uncation]
strncpy(l.dev, dev_name, sizeof(l.dev));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Copy strings correctly by using util_strlcpy() over strncpy() and get
rid of the following GCC8 compile warning:
In function ‘dinfo_extract_dev’,
inlined from ‘dinfo_get_dev_from_blockdev’ at dasdinfo.c:365:6:
dasdinfo.c:337:2: warning: ‘strncpy’ specified bound 80 equals
destination size [-Wstringop-trunc ation]
strncpy(tmp, str, RD_BUFFER_SIZE);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
IFNAMSIZ is the maximum buffer size for an interface name, including its
terminating zero byte. [1] strncpy() should therefore only copy a size
of 'IFNAMSIZ - 1' and the destination string should then be
null-terminated properly.
Use util_strlcpy() to correctly copy the string and get rid of the
followin GCC8 compile warning:
In function ‘ethtool_checksumming’,
inlined from ‘process_sysfs_attribute’ at lsqeth.c:333:5,
inlined from ‘print_device’ at lsqeth.c:468:3:
lsqeth.c:171:2: warning: ‘strncpy’ specified bound 16 equals destination
size [-Wstringop-truncat ion]
strncpy(ifr.ifr_name, if_name, IFNAMSIZ);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[1]: https://www.gnu.org/software/libc/manual/html_node/Interface-Naming.html
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Get rid of fixed buffers and avoid the following GCC8 compile warnings:
lszcrypt.c: In function ‘main’:
lszcrypt.c:642:28: warning: ‘%04x’ directive writing between 4 and 8
bytes into a region of size between 7 and 13 [-Wformat-overflow=]
sprintf(sub_dev, "%02x.%04x", id, dom);
^~~~
lszcrypt.c:642:22: note: directive argument in the range [0, 2147483647]
sprintf(sub_dev, "%02x.%04x", id, dom);
^~~~~~~~~~~
lszcrypt.c:642:5: note: ‘sprintf’ output between 8 and 18 bytes into a
destination of size 16
sprintf(sub_dev, "%02x.%04x", id, dom);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
DEV_NAME_SIZE is defined as IFNAMSIZ. IFNAMSIZ is the maximum buffer size
for an interface name, including its terminating null byte. [1] The
buffers dev_name and ifr_name are both defined with a size of
DEV_NAME_SIZE and IFNAMSIZ respectively.
Given these facts, only a size of 'IFNAMSIZ - 1' should be copied and
the destination string should then be null-terminated properly.
Use util_strlcpy() to correctly copy the strings and rid of the followin
GCC8 compile warnings:
xcec-bridge.c: In function ‘open_incoming_socket’:
xcec-bridge.c:94:2: warning: ‘strncpy’ specified bound 16 equals
destination size [-Wstringop-tru ncation]
..strncpy(if_req.ifr_name,dev_name,DEV_NAME_LEN);
..^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
xcec-bridge.c: In function ‘read_sys’:
xcec-bridge.c:284:4: warning: ‘strncpy’ output may be truncated copying
16 bytes from a string of length 255 [-Wstringop-truncation]
....strncpy(is->dev_name, if_name, DEV_NAME_LEN);
....^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[1]: https://www.gnu.org/software/libc/manual/html_node/Interface-Naming.html
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The term 'len' only represents the number of characters in a string,
as opposed to 'size' which means the number of bytes including the
terminating null byte ('\0').
DEV_NAME_LEN is defined as IFNAMSIZ, so we are clearly interested in the
size. Rename to DEV_NAME_SIZE to make this more clear.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The strlcpy() implementation in libu2s is beneficial for other tools as
well. Move the implementation to libutils and replace misc_strlcpy() in
libu2s accordingly.
Change the link order in zipl to make it build again.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Safely replace strncpy() with memcpy() as we don't want the terminating
null byte anyway. Get rid of the following warning:
dasdview.c: In function ‘dasdview_print_volser’:
dasdview.c:621:3: warning: ‘strncpy’ output truncated before terminating
nul copying 6 bytes from a string of the same length
[-Wstringop-truncation]
strncpy(volser, " ", 6);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
While assembling the volume label, strncpy() is used. As we don't care
about NUL termination of the strings here, safely replace strncpy() with
memcpy() and get rid of the following compile warnings:
fdasd.c: In function ‘fdasd_write_vtoc_labels’:
fdasd.c:1324:4: warning: ‘strncpy’ output truncated before terminating
nul copying 44 bytes from a string of the same length
[-Wstringop-truncation]
strncpy(ch, "LINUX.V "
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
" ", 44);
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
fdasd.c:1332:4: warning: ‘strncpy’ output truncated before terminating
nul copying 5 bytes from a string of the same length
[-Wstringop-truncation]
strncpy(c1, ".PART", 5);
^~~~~~~~~~~~~~~~~~~~~~~
In function ‘fdasd_write_vtoc_labels’,
inlined from ‘fdasd_write_labels’ at fdasd.c:1399:3:
fdasd.c:1329:4: warning: ‘strncpy’ output may be truncated copying 6
bytes from a string of length 6 [-Wstringop-truncation]
strncpy(c1, volser, VOLSER_LENGTH);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
fdasd.c:1336:4: warning: ‘strncpy’ output may be truncated copying 5
bytes from a string of length 5 [-Wstringop-truncation]
strncpy(c1, dsno, 5);
^~~~~~~~~~~~~~~~~~~~
fdasd.c:1340:4: warning: ‘strncpy’ output truncated before terminating
nul copying as many bytes from a string as its length
[-Wstringop-truncation]
strncpy(c1, dsname, strlen(dsname)); /* We don't want \0 */
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
fdasd.c:1313:4: warning: ‘strncpy’ output may be truncated copying 31
bytes from a string of length 44 [-Wstringop-truncation]
strncpy(c1, s2, 31);
^~~~~~~~~~~~~~~~~~~
In function ‘fdasd_change_part_type’,
inlined from ‘main’ at fdasd.c:3000:4:
fdasd.c:1639:3: warning: ‘strncpy’ output may be truncated copying 6
bytes from a string of length 19 [-Wstringop-truncation]
strncpy(ch, str, 6);
^~~~~~~~~~~~~~~~~~~
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
We can safely replace strncpy() with memcpy() here and get rid of the
following compile warnings:
dfi_s390mv.c: In function ‘set_magic_numbers’:
dfi_s390mv.c:570:3: warning: ‘strncpy’ output truncated before
terminating nul copying 7 bytes fr om a string of the same length
[-Wstringop-truncation]
strncpy(l.dumper_magic, DF_S390_DUMPER_MAGIC_MV_EXT, 7);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
dfi_s390mv.c:573:3: warning: ‘strncpy’ output truncated before
terminating nul copying 7 bytes fr om a string of the same length
[-Wstringop-truncation]
strncpy(l.dumper_magic, DF_S390_DUMPER_MAGIC_MV, 7);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Using inappropriate sizes for snprintf() leads to the following compile
warnings:
dfi_s390mv.c: In function ‘dev_from_busid’:
dfi_s390mv.c:116:34: warning: ‘/online’ directive output may be
truncated writing 7 bytes into a region of size between 1 and 4096
[-Wformat-truncation=]
snprintf(tmp_file, PATH_MAX, "%s/online", dev_file);
^~~~~~~
dfi_s390mv.c:116:2: note: ‘snprintf’ output between 8 and 4103 bytes
into a destination of size 4096
snprintf(tmp_file, PATH_MAX, "%s/online", dev_file);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
dfi_s390mv.c:143:35: warning: ‘%s’ directive output may be truncated
writing up to 255 bytes into a region of size between 0 and 4095
[-Wformat-truncation=]
snprintf(tmp_file, PATH_MAX, "%s/%s/dev", dev_file, direntp->d_name);
^~
dfi_s390mv.c:143:2: note: ‘snprintf’ output between 6 and 4356 bytes
into a destination of size 4096
snprintf(tmp_file, PATH_MAX, "%s/%s/dev", dev_file, direntp->d_name);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
A simple fix would be to use different suitable fixed sizes for tmp_file
and dev_file. However, the code can be improved here a little.
Use the libutil function util_path_sysfs() to build the sysfs path
string. This is more robust, as the function will figure out the correct
mount point of the sysfs. util_path_sysfs() will also terminate
execution, if no sysfs mount point could be found. That means, we can
get rid of check_sysfs().
Furthermore, the two variables (tmp_file, dev_file) can be combined to
one. Also, check the return value of open() and act accordingly.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Use misc_asprintf() for concatenating strings and get rid of the
following GCC8 compile warnings:
disk.c: In function ‘disk_get_info’:
disk.c:247:43: warning: ‘%d’ directive output may be truncated writing
between 1 and 11 bytes int o a region of size between 0 and 79
[-Wformat-truncation=]
snprintf(ppn_cmd, sizeof(ppn_cmd), "%s %d:%d",
^~
disk.c:247:39: note: using the range [-2147483648, 2147483647] for
directive argument
snprintf(ppn_cmd, sizeof(ppn_cmd), "%s %d:%d",
^~~~~~~~~~
disk.c:247:39: note: using the range [-2147483648, 2147483647] for
directive argument
disk.c:247:4: note: ‘snprintf’ output between 5 and 104 bytes into a
destination of size 80
snprintf(ppn_cmd, sizeof(ppn_cmd), "%s %d:%d",
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
script_file, major(stats.st_rdev),
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
minor(stats.st_rdev));
~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Using the DATA_SIZE() macro gets rid of the following GCC8 compile
warning:
boot.c: In function ‘boot_init_fba_stage0’:
boot.c:120:2: warning: ‘memcpy’ forming offset [2, 152] is out of the
bounds [0, 1] of object ‘_binary_fba0_bin_start’ with type ‘char’
[-Warray-bounds]
memcpy(stage0, DATA_ADDR(fba0), sizeof(*stage0));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from boot.c:18:
../boot/data.h:24:13: note: ‘_binary_fba0_bin_start’ declared here
extern char _binary_fba0_bin_start;
^~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
With GCC8 the following warning is displayed:
In file included from cio.h:15,
from stage2.h:15,
from menu.h:15,
from stage2.c:14:
s390.h:193:1: warning: alignment 1 of ‘struct _lowcore’ is less than 8
[-Wpacked-not-aligned]
} __packed;
^
Fix by aligning struct _lowcore to double page size.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The message buffer of DumpException doesn't account for additional
strings such as strerror(), device nodes, or filenames. Make it a bit
larger to be safe.
This fixes the following GCC8 compile warnings:
In file included from vm_dump.h:62,
from vm_dump.cpp:17:
dump.h: In static member function ‘static Dump::DumpType
VMDump::getDumpType(const char*)’:
dump.h:46:16: warning: ‘ (’ directive writing 2 bytes into a region of size
between 1 and 200 [-W format-overflow=]
sprintf(msg, "%s (%s)", m, strerror(errno));
^~~~~~~~~
dump.h:46:10: note: ‘sprintf’ output 4 or more bytes (assuming 203) into a
destination of size 200
sprintf(msg, "%s (%s)", m, strerror(errno));
~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
dump.h:46:16: warning: ‘ (’ directive writing 2 bytes into a region of size
between 1 and 200 [-W format-overflow=]
sprintf(msg, "%s (%s)", m, strerror(errno));
^~~~~~~~~
dump.h:46:10: note: ‘sprintf’ output 4 or more bytes (assuming 203) into a
destination of size 200
sprintf(msg, "%s (%s)", m, strerror(errno));
~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
dump.h:46:16: warning: ‘ (’ directive writing 2 bytes into a region of size
between 1 and 200 [-W format-overflow=]
sprintf(msg, "%s (%s)", m, strerror(errno));
^~~~~~~~~
dump.h:46:10: note: ‘sprintf’ output 4 or more bytes (assuming 203) into a
destination of size 200
sprintf(msg, "%s (%s)", m, strerror(errno));
~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
To assemble things like the volume id or fields of the format1 label
struct, strncpy() is used. Data copied here is later written to disk and
we don't want any terminating null byte ('\0') there. Therefore, we can
simply use memcpy() instead and get rid of the following GCC8 compile
warnings:
vtoc.c: In function ‘vtoc_init_format_1_8_label’:
vtoc.c:747:2: warning: ‘strncpy’ output truncated before terminating nul
copying 6 bytes from a s tring of the same length [-Wstringop-truncation]
strncpy((char *) f1->DS1DSSN, " ", 6);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
vtoc.c:746:2: warning: ‘strncpy’ output may be truncated copying 44 bytes from
a string of length 79 [-Wstringop-truncation]
strncpy(f1->DS1DSNAM, str, 44);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
vtoc.c:761:2: warning: ‘strncpy’ output may be truncated copying 13 bytes from
a string of length 79 [-Wstringop-truncation]
strncpy((char *)f1->DS1SYSCD, str, 13);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
vtoc.c: In function ‘vtoc_volume_label_set_volser’:
vtoc.c:401:2: warning: ‘strncpy’ output may be truncated copying 6 bytes from a
string of length 6 [-Wstringop-truncation]
strncpy(vlabel->volid, s, VOLSER_LENGTH);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
fread()/fwrite() return the unsigned count of elements read/written or a
short count or zero in case of an error. Check if the number of elements
read/written matches the expectation. In case of fread(), if it does not
match, check if an error occurred and otherwise assume the file to be too
small. In case of fwrite(), if it does not match, assume an error.
Resolves Cppcheck style warnings:
[zkey/pkey.c:161]: (style) Checking if unsigned variable 'count' is less than zero.
[zkey/pkey.c:209]: (style) Checking if unsigned variable 'count' is less than zero.
[zkey/pkey.c:299]: (style) Checking if unsigned variable 'count' is less than zero.
Cc: Ingo Franzki <ifranzki@de.ibm.com>
Signed-off-by: Jens Remus <jremus@linux.ibm.com>
Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
When realloc() fails to allocate memory it returns NULL and the original
block is left untouched. In that case return the potentially larger
original block.
Found using Cppcheck:
[zdev/src/misc.c:1106]: (error) Memory leak: name
Cc: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: Jens Remus <jremus@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The modified flag was actually never copied during merge of setting lists.
Copy the modified flag if requested.
Found using Cppcheck:
[zdev/src/setting.c:553]: (warning) Redundant assignment of 'n->modified' to itself.
Cc: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: Jens Remus <jremus@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The computation of blk in functions fdasd_check_volume() and
fdasd_write_vtoc_labels() contained the possibility for an undetected
unsigned integer overflow. Unconditionally subtracting one from the
return value of function cchhb2blk() may cause an unsigned integer
overflow, as cchhb2blk() may return zero if cc, hh, and b are all zero.
Resolves Cppcheck style warning:
[fdasd/fdasd.c:1260]: (style) Checking if unsigned variable 'blk' is less than zero.
Cc: Stefan Haberland <sth@linux.ibm.com>
Cc: Jan Hoeppner <hoeppner@linux.ibm.com>
Signed-off-by: Jens Remus <jremus@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Only check if size is zero and not if equal or less than zero. This is
safe, as size is only decremented by rlen, which is either less than or
equal to size. So size may never overflow.
Resolves Cppcheck style warning:
[cmsfs-fuse/cmsfs-fuse.c:3746]: (style) Checking if unsigned variable 'size' is less than zero.
Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Jens Remus <jremus@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
For linking the "libvmcp" example program the "libutil" is required.
Therefore when the "libvmcp" directory is entered in a parallel build
and the "libutil.a" file has not yet been created, a second "libutil"
build is triggered which can then lead to build errors like the following:
ar: libutil.a: File format not recognized
ar: libutil.a: No such file or directory
make[2]: Leaving directory '/builddir/build/BUILD/s390-tools-2.6.0/libutil'
make[2]: *** [../common.mak:246: libutil.a] Error 1
make[1]: *** [../common.mak:246: libutil.a] Error 1
make[1]: *** Waiting for unfinished jobs....
make[1]: *** [../common.mak:315: ..//libutil/libutil.a] Error 2
make[1]: Leaving directory '/builddir/build/BUILD/s390-tools-2.6.0/libvmcp'
make: *** [Makefile:57: libvmcp] Error 2
make: *** Waiting for unfinished jobs....
ving directory '/builddir/build/BUILD/s390-tools-2.6.0/libutil'
make: *** [Makefile:57: libutil] Error 2
error: Bad exit status from /var/tmp/rpm-tmp.wCulxB (%build)
So fix this and add a dependency between libvmcp and libutil.
Signed-off-by: Michael Holzheu <holzheu@linux.ibm.com>
Reviewed-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
When using 'zkey cryptsetup' with the '--run' option,
it might not find the executable to execute when those
are in /sbin.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Change all error messages from printf() to warnx().
While at it, remove the punctuation mark for some of the error messages.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The .o.d make targets in common.mak do not expect that
header files are generated by a make target. When a new header
file is generated, the .o.d targets will be rebuilt on the
next make invocation, because that new header file is then
detected, and is then treated as a new dependency of all .o.d
targets.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The linux.vnet.ibm.com addresses will be become disfunct by eoy.
Signed-off-by: Stefan Raspl <raspl@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add the missing identifiers to report the card name and link speed.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Print a meaningful reason when the keystore can not be
accessed, e.g. because the user is not allowed to access
the keystore directory.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Dump compression was a feature of the file system dumper which was removed
several years ago. This include is a leftover. Remove it.
Signed-off-by: Philipp Rudo <prudo@linux.ibm.com>
Acked-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Remove unused code because query_OSA_EXP does actually never return -1.
So make its return value unsigned and remove all checks for negative
return values.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Osasnmpd would start without any devices, but refuses to start when all
devices are no real OSA devices.
Start osasnmpd in this case because it re-scans via update_mib_info
whenever the interface data changes.
Reviewed-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The util_scandir_* functions may return 0 or -1, in which case no vector
is allocated in libutil/util_scandir.c. util_ptr_vec_free, called by
util_scandir_free or directly from lschp.c and lsscm.c, does always
call free for the vector which might be not initialized.
Fix this by always initializing the vector with NULL in __scandir and
add some api hardening by checking the vector and count in
util_ptr_vec_free before iterating over the vector.
And update the comment for util_scandir to indicate that -1 may be
returned in error cases plus that the vector is initialized with NULL.
Fixes: https://github.com/ibm-s390-tools/s390-tools/issues/43
Reported-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Unfortunately zdev hook already exists in Ubuntu, from an unrelated
project. ZFS uses zdev/zpool names, and ships a zdev hook to do ZFS
specific initialisation. It is available on s390x and thus results in
file-conflict upon installing both. Thus renaming this zdev hook to
s390-tools-zdev.
Closes: https://github.com/ibm-s390-tools/s390-tools/pull/41
Signed-off-by: Dimitri John Ledkov <xnox@ubuntu.com>
Acked-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
At the moment, if we specify the slot address of an NVMe device but
can't find the corresponding device node, the execution is terminated.
This is a bit harsh as the device node is rather optional and only
necessary to collect S.M.A.R.T. data. We should still be able to issue
the error reporting, even if we couldn't determine the device node.
Therefore, make sure the device node for NVMe devices is optional by
changing various error messages to warnings.
Change sysfs_get_slot_addr() to have a return value and work with that
accordingly.
Also make sure, that execution is terminated when a valid device node
was specified but no matching slot address was determined. The slot
address is necessary to issue the error reporting commands.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The address sysfs attribute might not be present on some older kernel
levels. Read the device link instead using readlink() to obtain the
address.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Be consistent with the rest of the code and use fopen() rather than
open().
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This patch fixes false positives when attributes are checked for
conflicts between BridgePort and VNICC.
Signed-off-by: Hans Wippel <hwippel@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The minor()/major() function definitions are moved to sys/sysmacros.h
and will be removed from sys/types.h. To correct below warning, simply
include sys/sysmacros.h.
zpcictl.c: In function ‘sysfs_get_slot_addr’:
zpcictl.c:184:13: warning: In the GNU C Library, "major" is defined
by <sys/sysmacros.h>. For historical compatibility, it is
currently defined by <sys/types.h> as well, but we plan to
remove this soon. To use "major", include <sys/sysmacros.h>
directly. If you did not intend to use a system-defined macro
"major", you should undefine it after including <sys/types.h>.
major = major(dev_stat.st_rdev);
^~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
zpcictl is used to manage PCI devices on z Systems. In this first
version it is mainly used to handle erroneous PCI devices by changing
their state and make those changes known to the SE. Log data, such as
S.M.A.R.T. data for NVMe devices, is sent alongside those state changes.
The state change is issued by sending data via the PCI 'report_error'
sysfs attribute. It's a binary attribute which will cause the host to
send an Adapter Notification Event.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
With the latest kernel comes an extension for the zcrypt
device driver to support multiple zcrypt device nodes.
Here is the userspace part of this which adds a new
application zcryptctl for user friendly management of
this feature.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
zipl currently uses the FIBMAP ioctl to map blocks for the bootloader;
on XFS, if FIBMAP is requested on a reflinked file, it will fail -
and FIBMAP returns 0 in this case, which is indistinguishable from a
hole. This causes boot to fail because the file is not mapped.
We can use the FIEMAP ioctl instead, which is able to map reflinked
files. While FIEMAP is able to map entire extents at once, here we
simply use it to obtain the mapping block-by-block so that it fits
in with the current FIBMAP calls.
Fixes: https://github.com/ibm-s390-tools/s390-tools/issues/34
Closes: https://github.com/ibm-s390-tools/s390-tools/pull/36
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Tested-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
With kernel 4.19 there comes an extension to the existing
AP bus which supports alternate zcrypt drivers. For details
about this see kernel patch "s390/zcrypt: AP bus support for
alternate driver(s)". So now lszcrypt displays the driver
name in verbose mode. As some of the information displayed
by lszcrypt was based on sysfs attributes, which are only
available when the default zcrypt driver is bound to the
device, this also needed some rework. If a sysfs attribute
is not available because of an alternate driver binding
(or no driver) a question mark is printed into the field.
Together with this a slight rework of the displayed information
has been done. The two columns for pending requests and pending
replies has been merged to one pending column and the column
sizes have been adjusted.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
zdsfs writes output for --help and --version to stderr. This is
likely because zdsfs calls into a FUSE function for additional
usage output that also writes to stderr (prior to FUSE 3.0.0).
To be consistent with other s390-tools and GNU coding guide lines,
fix this by using stdout for zdsfs generated output, and by
redirecting stderr to stdout before calling the FUSE function.
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
tape390_display writes output for --help to stderr. To be consistent
with other s390-tools and GNU coding guide lines, fix this by using
stdout for tool-generated usage help.
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add missing long options for --help and --version in util_prg_example.
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Both iucvconn and iucvtty write output for --help to stderr. To be
consistent with other s390-tools and GNU coding guide lines,
fix this by using stdout for tool-generated usage help.
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
hmcdrvfs writes output for --help and --version to stderr. This is
likely because hmcdrvfs calls into a FUSE function for additional
usage output that also writes to stderr (prior to FUSE 3.0.0).
To be consistent with other s390-tools and GNU coding guide lines,
fix this by using stdout for hmcdrvfs generated output, and by
redirecting stderr to stdout before calling the FUSE function.
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
cmsfs-fuse writes output for --help and --version to stderr. This is
likely because cmsfs-fuse calls into a FUSE function for additional
usage output that also writes to stderr (prior to FUSE 3.0.0).
To be consistent with other s390-tools and GNU coding guide lines,
fix this by using stdout for cmsfs-fuse generated output, and by
redirecting stderr to stdout before calling the FUSE function.
Also remove an inactive call to add FUSE version output on --version to
be consistent with other FUSE-based s390-tools.
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Building zipl from outside the zipl/ sub-directory fails due to a
missing dependency:
# cd s390-tools
# make -C zipl/src/ zipl
boot.c:18:10: fatal error: ../boot/data.h: No such file or directory
#include "../boot/data.h"
This is because boot/data.h needs to be generated before src/boot.c can
be compiled. Fix this by adding the missing dependency to the zipl
Makefile.
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Assume "N/A" for non-zfcp SCSI devices, such as iSCSI or virtio-scsi-ccw,
to not erroneously access absent zfcp-specific sysfs attributes.
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Simply skip non-zfcp SCSI devices, such as iSCSI or virtio-scsi-ccw,
to not erroneously access absent zfcp-specific sysfs attributes.
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The default bash setting have nullglob disabled so if
$SCSI_DEV/scsi_generic*
aka
/sys/bus/scsi/devices/*:*:*:*/scsi_generic*
does not match anything, it leaves the glob pattern unmodified and
SG_DEV=$(basename $SG_DEV/*)
results in the literal:
*
If $SG_INQ exists, it invoked sg_inq with more than the one allowed
positional argument for a SCSI generic device node:
sg_inq /dev/*
Causing error messages and the usage of sg_inq to land in $TAPE_SERIAL.
To not have to rely on the nullglob setting, explicitly check for the
existence of $SCSI_DEV/scsi_generic before evaluating
SG_DEV=$(basename $SG_DEV/*).
Also handle availability of sg_inq but absence of scsi_generic
individually to provide the user with a hint if only sg is missing.
Suggested-by: Eric Farman <farman@linux.vnet.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Cc: Eric Farman <farman@linux.vnet.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This should be more stable than parsing the IBM lin_tape proc-fs output.
If sysfs is not available or provides no match, fall back to proc-fs.
An alternative to "ls -1d ... | head -n1" would have been to use
"shopt -s extglob; ls -d $SCSI_DEV/lin_tape/$DEV_NAME+([0-9])"
but I did not want to have to rely on extglob potentially influencing
other old code of lstape.
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
https://www.ibm.com/developerworks/linux/linux390/s390-tools-1.8.0.html
before the first upstream commit b627b8d8e1 ("Initial s390-tools-2.0.0
import") introduced SCSI tape/changer output for lstape. It used the SCSI
device serial number as lookup key to find a match in IBM lin_tape device
driver proc-fs output for a given SCSI device name. Since multiple paths
to the same tape/changer have the same serial number, multiple matches can
occur and distort the output:
% lstape
...
SCSI tape devices (found 12):
...
Generic Device Target Vendor Model Type State
sg0 IBMtape0 3 0:0:0:0 IBM ULT3580-TD6 tapedrv
running
sg1 IBMchanger0 1 2 3 0:0:0:1 IBM
3573-TL changer running
...
There are unexpected additional Device suffix numbers for each additional
path of the same tape/changer (independent of actual path failover
enablement in lin_tape). The multiple matches above cause excess arguments
to printf. Explaining the resulting output, the bash man page says:
"The format is reused as necessary to consume all of the arguments."
This also causes a wrong number of found devices.
Current lin_tape (v3.0.31) uses the printf format string
"%-8d%-12s%-25s%-16s%-16s%-10s" for fixed column proc-fs output.
This causes the following example input to lstape:
==> /proc/scsi/IBMchanger <==
lin_tape version: 3.0.31
lin_tape major number: 251
Attached Changer Devices:
Number model SN HBA SCSI FO Path
0 3573-TL 00L4U78W6497_LL0 Virtio SCSI HBA 0:0:0:1 Primary
1 3573-TL 00L4U78W6497_LL0 Virtio SCSI HBA 0:0:1:1 Alternate
2 3573-TL 00L4U78W6497_LL0 Virtio SCSI HBA 1:0:1:1 Alternate
3 3573-TL 00L4U78W6497_LL0 Virtio SCSI HBA 1:0:0:1 Alternate
==> /proc/scsi/IBMtape <==
lin_tape version: 3.0.31
lin_tape major number: 251
Attached Tape Devices:
Number model SN HBA SCSI FO Path
0 ULT3580-TD6 10WT037733 Virtio SCSI HBA 0:0:0:0 Primary
1 ULT3580-TD6 10WT037701 Virtio SCSI HBA 0:0:1:0 Primary
2 ULT3580-TD6 10WT037701 Virtio SCSI HBA 1:0:1:0 Alternate
3 ULT3580-TD6 10WT037733 Virtio SCSI HBA 1:0:0:0 Alternate
If that was reliable and stable, we could use fixed column parsing:
IBM_IDX=$(
awk 'BEGIN {
FIELDWIDTHS="8 12 25 16 16 10"
}
gensub(" ","","g",$5) == "'$SCSI_ID'"{
print gensub(" ","","g",$1)
}' /proc/scsi/$DEV_NAME
)
However, we can hardly guarantee a field value always fits into the left-
adjusted columns (printf won't cap to field width!). Also, the fixed column
format changed between lin_tape v3.0.20 and v3.0.18 from
"%-8d%-12s%-18s%-16s%-16s%-10s" with less width for the 'SN' field.
The column format also changed between v2.2.0 and v1.37.0 from
"%-8d%-12s%-18s%-32s%-10s" where the 'SCSI' field did not even exist.
Likely that was the reason for the original Serial lookup in lstape.
As can be seen in the example, at least the HBA device driver string can
contain whitespace and breaks the field numbers with tokenized parsing.
We want to match column 5 (SCSI) but above we would match against the
string 'SCSI' as part of "Virtio SCSI HBA" instead of e.g. '0:0:0:0'.
The following works currently knowing that the last two columns do not
contain white space. But it can also fail if the value of field
'HBA' does not fit into the left-adjusted columns so there is no white
space between columns 'HBA' and 'SCSI' making them collapse:
awk '$(NF-1) == "'$SCSI_ID'" { print $1 }' /proc/scsi/$DEV_NAME
Grep for the SCSI device name as word (to skip names with same substring,
such as 0:0:1:1 also matching 0:0:1:10) and cut the first field 'Number'.
If there is no SCSI column at all (and no SCSI LLDD or other column with a
name accidentally matching an existing SCSI device name), we get no match
and better bail out with the initialized "N/A" for the lstape column
"Device". If the SCSI column exists, the SCSI device names are unique and
we always get at most one match.
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
When zfcpdump is built you get a compile warning
zfcpdump.c: In function ‘init_sig’:
zfcpdump.c:307:24: warning: cast between incompatible function types from ‘void (* (*)(int, siginfo_t *, void *))(int)’ {aka ‘void (* (*)(int, struct <anonymous> *, void *))(int)’} to ‘void (*)(int)’ [-Wcast-function-type]
g.sigact.sa_handler = (__sighandler_t)dump_sig_handler;
Furthermore the man pages for sigaction says
$man 2 sigaction
[...]
If SA_SIGINFO is specified in sa_flags, then sa_sigaction (instead
of sa_handler) specifies the signal-handling function for signum.
This function receives three arguments, as described below.
[...]
Because SA_SIGINFO is set, using sa_handler at all is wrong in this case.
Fix this by giving dump_sig_handler the correct return type and assign it
to sa_sigaction.
Signed-off-by: Philipp Rudo <prudo@linux.ibm.com>
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The zfcpdump kernel is built without module support. Furthermore the initrd
doesn't contain modprobe. So trying to load modules using modprobe in
zfcpdump userspace doesn't really make sense.
Signed-off-by: Philipp Rudo <prudo@linux.ibm.com>
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Since version 198 (Feb 2013) systemd contains kernel-install, a script
managing kernel installs. This script allows execution of drop-in scripts
for customization. Add such a drop-in script to s390-tools to handle the
installation of zfcpdump kernels.
It's main purpose is to manage a link to the latest installed zfcpudump
kernel at ZFCPDUMP_IMAGE, where zipl expects to find the image to install
for a SCSI dumper.
The script supports two installation modes. One recommended by the
BootLoaderSpecs [1] to /boot/<machine-id>/<kernel-version> directories and
one directly to /boot. In the second case files are renamed during
installation to <original-name>-<kernel-version> to guarantee unique names.
Because the zfcpdump kernel is so special make the script stand-alone and
prevent any other script from being executed (exit 77) when a zfcpdump is
installed. Especially avoid functionality like creating an initrd (already
provided by s390-tools) or creating a boot entry (the zfcpdump kernel
should not be used for any other purpose than dumping).
The script requires systemd >= 203.
[1] https://www.freedesktop.org/wiki/Specifications/BootLoaderSpec/
Signed-off-by: Philipp Rudo <prudo@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
In the zipl Makefile macros are defined with the sole purpose to define
other macros in zipl.h. Remove this unnecessary indirection.
Signed-off-by: Philipp Rudo <prudo@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The file system dumper no longer exists. So there is no need in keeping
'PART' to distinguish between the file system and the partition dumper.
Adjust the macro name to the usage in zipl by removing 'PART'.
While at it also adjust the file names the macros stand for.
Signed-off-by: Philipp Rudo <prudo@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The macro names are a mixture of the original file system dumper (FSDUMP)
and its extension to cut the file system and write directly to a partition
(PART). The original dumper no longer exists and today the feature is
called zfcpdump. Prevent confusion by renaming the macros to fit todays
usage.
Signed-off-by: Philipp Rudo <prudo@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Allow to specify a volume-type for a key. This applies to all
associated volumes. The volume type can be either 'plain' or
'luks2'. New keys created will default to 'luks2', but existing
keys that do not have a volume-type property default to 'plain'
for compatibility reasons.
The volume type 'luks2' is only available when the define
HAVE_LUKS2_SUPPORT is set in the makefile. This is set only
when libcryptsetup version 2.0.3 or newer is available
at build time. If the define is not set, the volume-type
option is not available to the user, and the volume-type of
a key defaults to 'plain'.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Store a verification pattern in the properties file along
with the secure key. The verification pattern allows to identify
the inner key even when the secure key is no longer valid.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The zkey-cryptsetup tool is used to validate and re-encipher
secure AES volume keys of volumes encrypted with LUKS2 and
the paes cipher.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The IPAPPEND option in the pxelinux config file can be used
to pass information about the boot interface to the booted
Linux kernel.
The support for this option was missing and could lead to
installation failures, e.g. using kickstart.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Client architecture aware DHCP configurations may send a
bootfile for the wrong architecture, if the DHCP request
doesn't include the client architecture identifier 0x001f.
Further, the DHCP reply may include the pxepathprefix option,
which points to the base directory to use for TFT requests.
If the value is not honored by the client, the wrong
configuration file, kernel, etc. could be loaded.
Both issues are fixed by this commit.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Compressed kernel modules (filename *.ko.xz) would not be included
since the script was looking for files with .ko suffix only.
This can result in a pxelinux.0 image that can't access the
network, which is not good for a network boot loader...
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The output of /proc/<pid>/stat will show the process name in parentheses.
The parsing code in read_stat() tries to filter out the parentheses, which
will go wrong when the process name itself also contains parentheses, e.g.
in an output like this: "2421 ((sd-pam)) S 2420 2420 2420 ..."
In this case, the first closing parentheses will be taken as end marker,
and the sscanf() on the remaining string will silently fail, leaving its
values in uninitialized state and producing wrong data.
Fix this by using strrchr() instead of strchr() to find the last closing
parentheses. Also add return value checking for sscanf() and initialize the
values to 0.
Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
mk-pxelinux-ramfs, mod_fsstatd|procd.service, zfcpdump all use
/sbin/modprobe path. Adjust zdev to use that path as well. This works
universally on both usr-merge systems (e.g. Debian/Ubuntu with
usrmerge package installed), and split-usr systems alike
(Debian/Ubuntu current stable releases default).
Closes: #31
Link: https://bugs.launchpad.net/ubuntu/+source/s390-tools/+bug/1777600
Signed-off-by: Dimitri John Ledkov <xnox@ubuntu.com>
Acked-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
When a volume or APQN association is made while generating or
importing a key, and a duplicate association is detected, then
this may leave the key in an inconsistent state.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
When a zkey generate or change command is used to associate one
or multiple APQNs the command succeeds, but no key is generated
and no APQNs are associated, because the return code returned by
_keystore_apqn_check() is wrong.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The APQN check routine as well as the properties helper functions
do not free all memory that they allocated.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add a zipl-switch-to-blscfg script that can be used to switch the zipl
configuration in a system to use the BootLoaderSpec (BLS) config files
to define the IPL sections instead of having them defined in zipl.conf.
Closes: #28
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The BootLoaderSpec (BLS) defines a file format for boot configurations,
so bootloaders can parse these files and create their boot menu entries
by using the information provided by them [0].
This allow to configure the boot items as drop-in files in a directory
instead of having to parse and modify a bootloader configuration file.
If the /boot/loader/entries exists and there are BLS files there, then
these are parsed and configuration sections are added without the need
to have these in a zipl.conf file.
A different BLS directory can be specified from the command line using
the --blsdir option.
[0]: https://www.freedesktop.org/wiki/Specifications/BootLoaderSpec/
GitHub-ID: #28
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The function returns 0 on success and a negative number on error but is
useful to know how many tokens were allocated. This will be used by the
BLS parsing code to determine if needs to allocate mor tokens or not to
parse the BLS fragments.
GitHub-ID: #28
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
lsluns lists nothing and returns with return code 0 if no adapter (FCP
device) or target port exists in sysfs. This can be confusing for the user.
Print a message if no adapter exists. Print a message if no port exists on
any adapter.
Reported-by: Thorsten Diehl <thorsten.diehl@de.ibm.com>
Suggested-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Jens Remus <jremus@linux.ibm.com>
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Changing the cmb_enable attribute of a CCW device can cause a blocked
chzdev process or udev rule. This problem occurs when the device is
offline, cmb_enable is 0, and chzdev is used to set cmb_enable=1 and
online=1 at the same time.
The following call will block:
chzdev 190d -a cmb_enable=1 online=1
The following call will generate a udev rule that will block subsequent
calls to 'udevadm settle':
chzdev 190d -p online=1 cmb_enable=1
Fix this by ensuring that cmb_enable is only set when the CCW device
is not online.
Reported-by: André Wild <wild@linux.vnet.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Enable user to specify that a device should be configured early, that is
during the initial RAM-disk boot phase. This may be necessary, e.g. to
override auto-configuration for a device which is also applied during
that boot phase. It may also be used to manually specify devices that
are required to access the root file system, such as networking devices.
Users can mark devices as requiring early configuration by specifying
a value of 1 for the newly added internal attribute zdev:early:
# chzdev dasd-eckd 0.0.1234 -p zdev:early=1
This can be changed back by removing the attribute setting, or by
setting the attribute value to 0:
# chzdev dasd-eckd 0.0.1234 -p -r zdev:early
or
# chzdev dasd-eckd 0.0.1234 -p zdev:early=0
Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This change adds base infrastructure for implementing internal device
attributes. In the context of the zdev tools, an internal device
attribute is a new type of device attribute with the following
characteristics:
- Can be set and removed like normal device attributes
- Affects zdev-internal handling only
- Does not correspond to an actual device attribute, that is
it has no representation in SysFS
- Can not be set in the active configuration
- Name starts with "zdev:" to prevent conflicts with actual
device attributes
Values for internal device attributes are stored in udev rules alongside
the normal persistent configuration of a device. They are encoded as
udev environment variables. Note that they have no further effect on
udev processing.
Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add initramfs-tools scripts that apply firmware-provided I/O
configuration data as auto-configuration during boot. This way, all I/O
devices configured by DPM are automatically brought online without
further user interaction.
This mechanism is active by default. It can be deactivated by specifying
the following parameter on the kernel command line:
rd.zdev=no-auto
Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add a dracut hook that applies firmware-provided I/O configuration data
as auto-configuration during boot. This way, all I/O devices configured
by DPM are automatically brought online without further user
interaction.
This mechanism is active by default. It can be deactivated by specifying
the following parameter on the kernel command line:
rd.zdev=no-auto
Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Auto-configuration is the name of a new configuration target that is
supported by chzdev and lszdev besides the existing active and
persistent configuration targets. Directives created in this new
configuration are stored as udev rules in the /run/udev/rules.d
directory.
Auto-configuration directives are only in effect if there are no
directives for the same device in the user-provided persistent
configuration. This allows users to override auto-configuration
directives if necessary.
Due to the volatile nature of the /run directory, auto-configuration
directives are cleared on reboot. Therefore mechanisms that generate
auto-configuration directives must recreate them on every boot.
The lszdev tool displays auto-configuration data both in list view
as well as in detail view. Users can specify the new option --auto-conf
to only show data from this configuration target.
Mechanisms that generate automated configuration directives can use
chzdev together with the --auto-conf option to create the corresponding
udev rules.
Note: This change does not include a mechanism that generates
auto-configuration directives.
Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Change chzdev's udev rule generation from the previous approach of
combining all zfcp-lun udev rules associated with an FCP device into a
single file to storing zfcp-lun udev rules in one file per zfcp-lun.
This is done to enable per-device udev rule masking.
With udev rule masking, if a udev rule file by the same name exists in
both /etc and /run, the udev daemon will only consider the rules found
in /etc.
The auto-configuration feature will make use of per-device udev rule
masking to introduce a new class of configuration data (stored in /run)
that is only active if no user-provided configuration data (in /etc)
exists.
In addition, change chzdev to allow the regeneration of udev rules by
using the --force command line like in the following example:
# chzdev zfcp-lun --configured --enable --persistent --force
This can be used to convert all existing zfcp-lun udev rules from the
old format to the new one.
Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
There are some situations where running "udevadm settle" can result in
a deadlock, such as in the early stages of initial RAM-disk processing.
Introduce a new command-line option --no-settle that can be used to
suppress calling "udevadm settle" to allow chzdev to be run in such
situations.
Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add support for reading firmware-provided I/O configuration data files.
Such configuration files are generated by the Dynamic Partition Manager
and made available via a kernel interface for consumption by Linux.
To read a firmware configuration file, use the existing --import option:
# chzdev --import /sys/firmware/sclp_sd/config/data
This will apply all I/O configuration data found in the specified file
to the persistent configuration.
Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Apply some changes to existing functions and data structures to simplify
the firmware configuration file support implementation.
- Make qeth and dasd subtype objects non-static
- Change the existing helper functions for reading file contents into
memory to also support binary functions
- Move some configuration file import functions to make them available
for use in other source files
Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The udev rule for SCSI devices is still using the WAIT_FOR keyword,
which was used to make sure that a file does in fact exist before any
rule is applied. That keyword, however, was removed with systemd-220 and
is therefore no longer valid, which in turn leads to errors on newer
systems.
Use the TEST keyword instead to check the existence of a file before we
apply any rules.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Create the default keystore directory '/etc/zkey/repository'
and the user group 'zkeyadm' during make install.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add new commands to the zkey utility to store secure AES keys in
the secure key repository provided by the keystore implementation
introduced in the previous commit.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add a keystore implementation that stores secure AES keys in a
key repository, located in a directory, e.g. '/etc/zkey/repository'.
The keystore allows you to generate, validate, re-encipher, modify,
list, delete, etc secure keys.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
To reduce the size of the zkey.c source file, all routines that
deal with secure keys are moved to a new source file pkey.c.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Comma separated strings are used in property values to store
multiple values in one property. These helper functions allow to
work with such comma separated strings.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The integrity support for the properties file routines use
SHA-256 to build a hash of the keys and values of a property file.
The codes uses the EVP_DigestInit_ex, EVP_DigestUpdate, and
EVP_DigestFinal from the libcrypto library (OpenSSL).
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
In preparation for a new feature, introduce property file
handling routines. A property file stores key value pairs
in a text file. Optionally a hash of all keys and values
contained in the properties file can be generated to
ensure integrity of the properties file and to detect
manual modifications.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add 'Dump file size' field for zgetdump -i output to show the actual size
of dump file in s390 extended format on disk in megabytes.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add verbose option for zgetdump to display the detailed layout of memory
map when printing dump info for s390_ext or ELF dump format.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Adjust ELF formatted dump processing by zgetdump tool in order to handle
so-called zero loads using zero memory chunks introduced with s390
extended dump format.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Update zgetdump tool to process dumps of the new s390 extended format.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Update 'zgetdump -d' to process the new DASD dump tool installed (single
volume or multi-volume).
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Update df_s390_dumper structure and dumper reading functions to read
certain dumper fields instead of the entire dump tool.
Update other s390 dump common functions in preparation for the new dumper
and the new s390 extended dump format.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Adjust progress_print() function to print dump progress message based on
the time interval thus printing the message with a regular rate.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Update zipl DASD standalone dumpers for single-volume, multi-volume and FBA
to drop the sets of zero pages when dumping memory to disk. Thus, all
continuous sets of zero-megabytes in the memory are dropped during the dump
stage.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Old implementation was using Test Protection (TPROT) instruction to
validate the memory page. Given that it is a rather slow instruction and
the fact that we only need to validate the read-access for a page, we can
use simple Load or Insert Character instruction to test that.
The new version of page_is_valid() without a TPROT is introduced.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.vnet.ibm.com>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The program check handler has a bug in calculating the address of the target
to jump to. Furthermore the use of relative addresses in the exception table
can lead to situations where the (calculated) fault is not unique. Storing
the absolute address of the fault and target in the exception table solves
both problems.
This patch is intended to:
- Modify exception table to store the absolute address of 'fault' and
'target' points
- Adjust program check handler function pgm_check_handler_fn() accordingly
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.vnet.ibm.com>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
chreipl could only be used as root (effective userid 0), which is
explicitly checked upon invocation.
"access" call is a wrong method to check super user read/write access
for sysfs files, because it is simply always returns 0 (success), despite
actual sysfs file permissions or underlying sysfs file callbacks setup.
The only guaranteed way of checking sysfs file super user access is an
actual open call with the corresponding access mode.
The problem is that chreipl always tries to update some sysfs attributes
even through they are not specified as command line arguments. Together
with a broken sysfs file access checks this leads to inability to use
the tool, when some sysfs attributes are read-only (which is the case
on older systems where diag308 set does not work).
$ chreipl ccw -d 0.0.ec5a
chreipl: Could not open "reipl/ccw/parm" (Permission denied)
The change fixes access checks, which are in place to handle "diag308
set does not work" case (presence of read-only sysfs attributes).
Also replaces R_OK with F_OK in "set_target_type_auto" to underline that
only file presence is checked, not an actual read access.
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Make write_str_errno return errno in all error cases, so that it would
be usable in scenarious where open call could fail and we just want to
get an errno, not to exit.
This function is currently only used by chshut in a context where
such a change wouldn't hurt debug ability.
159 if (write_str_errno(argv[2], path))
160 ERR_EXIT_ERRNO("Could not set \"%s\"", path);
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
kdump reipl implementation relies on os_info kernel structure
residing in old memory being dumped. os_info contains reipl block, which
is used (if valid) by the kdump kernel for reipl parameters.
The problem is that the reipl block and its checksum inside
os_info is updated only when /sys/firmware/reipl/reipl_type is
written. This sets an offset of a reipl block for "reipl_type" and
re-calculates reipl block checksum. Any further alteration of values
under /sys/firmware/reipl/{reipl_type}/ without subsequent write to
/sys/firmware/reipl/reipl_type lead to incorrect os_info reipl block
checksum. In such a case kdump kernel ignores it and reboots using
default logic.
This change makes sure that all fcp values are written before
reipl_type, to avoid potential problem with incorrect checksum.
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
When dump is not complete or dump memory limit is set, zgetdump might end up
with the Segfault on reading Vector Registers. That might take place when
the Vector Registers save area is beyond the dump memory limit.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.vnet.ibm.com>
Reviewed-by: Philipp Rudo <prudo@linux.vnet.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The short descriptions for a counter in the extender counter
set should be identical for all models.
This patch fixes minor differences.
Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
double free or corruption (out)
Program received signal SIGABRT, Aborted.
0x000003fffdd40404 in raise () from /lib64/libc.so.6
(gdb) bt
#0 0x000003fffdd40404 in raise () from /lib64/libc.so.6
#1 0x000003fffdd41ec2 in abort () from /lib64/libc.so.6
#2 0x000003fffdd88d8e in __libc_message () from /lib64/libc.so.6
#3 0x000003fffdd905c8 in malloc_printerr () from /lib64/libc.so.6
#4 0x000003fffdd98dfa in free () from /lib64/libc.so.6
#5 0x0000000001005994 in util_ptr_vec_free (count=<optimized out>, ptr_vec=0x101de90) at ../include/lib/util_base.h:46
#6 util_scandir_free (de_vec=0x101de90, count=<optimized out>) at util_scandir.c:174
#7 0x00000000010043ce in print_defunct_devices (rec=rec@entry=0x10114f0,
path=path@entry=0x101cc80 "/sys/devices/css0/defunct") at lscss.c:678
#8 0x0000000001004cfe in print_subchannels_of_type (type_requested=type_requested@entry=SUBCHANNEL_TYPE_IO,
rec=rec@entry=0x10114f0) at lscss.c:726
#9 0x0000000001003888 in cmd_lscss () at lscss.c:761
#10 main (argc=<optimized out>, argv=<optimized out>) at lscss.c:932
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The cpumf_helper.in is called to parse counter definition
files stored in /usr/share/s390-tools/cpumf directory and
returns perl references to be examined by other perl tools
such as lsctrdef.
cpumf_helper.in expects several keywords in the counter
definition files, one is 'shortdesc' which contains
a short description of the purpose of the counter.
However this short description not is stored in the hash
field shortdesc keyed by counter number 'ctr' because the
wrong key is used.
Output before:
{
'64' => {
'desc' => 'Total number of the PRNG functions issued by the CPU',
'name' => 'PRNG_FUNCTIONS',
'set' => 8
},
'65' => {
'desc' => 'Total number of CPU cycles when the DEA/AES coprocessor is busy performing PRNG functions issued by the CPU',
'name' => 'PRNG_CYCLES',
'set' => 8
},
....
'ctr' => { <-------- WRONG
'shortdesc' => 'AES Blocked Cycles'
}
}
Output with this patch:
{
'64' => {
'desc' => 'Total number of the PRNG functions issued by the CPU',
'name' => 'PRNG_FUNCTIONS',
'set' => 8,
'shortdesc' => 'PRNG Functions'
},
'65' => {
'desc' => 'Total number of CPU cycles when the DEA/AES coprocessor is busy performing PRNG functions issued by the CPU',
'name' => 'PRNG_CYCLES',
'set' => 8,
'shortdesc' => 'PRNG Cycles'
},
...
}
Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Use the new libvmcp.a to send commands to z/VM CP.
The error messages remain unchanged.
Local header file vmcp.h now only contains variable definitions
and some defines used by vmcp.c. Move them to the source file
and remove the now empty header file.
Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.vnet.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This patch prevents code duplication in vmcp related programs.
Some applications such as vmur, vmcp, and lsqeth
use z/VM CP commands to query information. Each program
uses its own defines and code.
Supply a library and common header file to use common code.
Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.vnet.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Fixed typo and added one sentence to explain more details
about online switching of queue devices.
Signed-off-by: Harald Freudenberger <freude@linux.vnet.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This patch
- moves function util_strstrip to libutil/util_libc.c and deletes the
extra files util_strstip.[ch]
- adds doxygen comments for util_strstrip()
- provides an example on how to use util_strstrip().
Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Fix some warnings found by sparse.
Declare one function static and change static variables to defines.
Signed-off-by: Stefan Haberland <sth@linux.vnet.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Remove unused include to fix an error reported by make C=1.
CHECK zipl/src/zipl_helper.device-mapper.o
../../include/lib/dasd_base.h:159:20: error: redefinition of struct hd_geometry
../../common.mak:234: recipe for target 'zipl_helper.device-mapper.o' failed
make: *** [zipl_helper.device-mapper.o] Error 1
The structure hd_geometry is defined in dasd_base.h.
Signed-off-by: Stefan Haberland <sth@linux.vnet.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
hmcdrvfs will ignore files with a link count >= 1000, due to an inconsistency
in the input data. The parsing code relies on having spaces between the
different fields in its input data. When a file has a link count >= 1000,
there will be no space, and the "link count" field will be placed directly
after the previous "mode" field. This will confuse the parser, and all such
files will not be accesible.
The "mode" field will never contain digits, so in order to fix this issue,
the parser can recognize the "link count" field by the presence of a digit.
Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Function strstrip strips leading and trailung
spaces from a given string.
During review it was decided to move this function
to the libutil library to make it available for other tools.
Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
